5-1775333-4

Quick Reference Guide Standard Flexible Printed Circuit (FPC) Connectors - 0.5mm, 1.0mm & 1.25mm Pitch As the demands for higher-density packaging of electronic equipment increase, the use of flexible printed circuits (FPC) to reduce size, weight and assembly costs has expanded. As with our fine pitch FPC product, our larger pitch FPC connectors are also an ideal solution for routing signal through your device when standard wire-to-board products are too large or impractical. Set on larger centerline pitch, these FPC products are generally found in larger mobile devices such as hand-held scanners, cameras and GPS units; as well as in larger applications such as set-top boxes, business equipment and industrial controls. FPC interconnects of this size are also commonly found on devices that have low-definition displays, touch panels or screens. This makes it very easy to identify potential FPC interconnect opportunities. TE Connectivity's FPC solutions are available in 0.25mm, 0.3mm, 0.4mm, 0.5mm, 1.0mm and 1.25mm centerline spacing. In this quick reference guide we introduce items with 0.5mm, 1.0mm and 1.25mm centerline spacing. FEATURES AND BENEFITS PRODUCT APPLICATIONS • Multiple Centerline Spacing Options • Consumer Electronics • ZIF and non-ZIF Versions Available • Top and Bottom Contact Options • Requires No Application Tooling - Hand-Held Scanners - POS Devices / Payment Terminals - Set-Top Boxes - PCs - PC Peripherals • Business Equipment • Industrial Equipment - Industrial Controls - Gas Pumps - ATMs - Slot Machines • Medical Equipment te.com/products/fpc 210-0264_CS3.indd 1 13.4.15 10:29:20 AM TE Connectivity Standard FPC Connectors - 0.5mm, 1.0mm, 1.25mm Pitch Basic Information Multiple Centerlines Measuring Centerline – Connector Side Measuring Centerline – Cable Side Centerline can be measured many different ways; however, in general, it is simply the spacing between the center of one contact and the center of its neighboring contact. Here you can see an example of the centerline spacing on an FPC connector and the centerline spacing on a flexible printed circuit cable. ZIF and non-ZIF ZIF Connectors ・Use an actuator to secure the flex cable ・Less wear on contacts ・Increase mating cycle count ・Provide added retention ・Better for high vibration environments Non-ZIF Connectors ・Use friction to secure the flex cable ・Lower mating cycle count ・Better for static applications ・Smaller and lighter weight than equivalent ZIF counterpart ・Take up less board real-estate ・Typically less expensive than equivalent ZIF counterpart Stuffer Actuator (Plunger Style) Many of our larger pitch ZIF-style FPC connectors use a stuffer-type actuator [See Below]. Stuffer actuators use a slightly different method to secure an FPC cable into the connector than the flip-lock versions [For flip-lock versions, see Fine Pitch FPC Connector Quick Reference Guide, document number 8-1773459-2]. Stuffer actuators are typically used in vertical applications for ease of use: however right angle versions are also available. Step One: Step Two: Step Three: Step Four: Starting State Slide Stuffer forward to open Insert the FPC into the connector & slide stuffer backward to close The FPC is now securely mated with the connector Upper (Top) Contact vs Lower (Bottom) Contact Many of our fine pitch FPC products are available in both Upper (top) or Lower (bottom) contact versions. This attribute simply represents which portion of the contact the flexible printed circuit interacts with. As you can see from the image below, the FPC contacts are formed in a “U” shape. Only one prong of that “U” shaped contact interfaces with the flexible printed circuit contacts. Choosing the correct contact design is generally based on the orientation of the flexible printed circuit as described below. If the contacts of the flexible printed circuit are facing up (away from the board) then the upper contact version is required. Upper(Top) Contact Lower(Bottom) Contact FPC FPC Contact Point If the contacts of the flexible printed circuit are facing down (towards the board) then the lower contact version is required. te.com/products/fpc 210-0264_CS3.indd 2 13.4.15 10:29:26 AM TE Connectivity Standard FPC Connectors - 0.5mm, 1.0mm, 1.25mm Pitch 0.5mm pitch (All PNs are ZIF style) 1 PCB ACTUATOR PLATING ORIENTATION CONTACT TYPE MOUNT STYLE FEATURES IMAGE 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 BASE PN 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 POSITION SIZE -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 30 GOLD 1775560 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 TOP SMT STUFFER GOLD FLASH -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 NARROW BODY 1734839 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 30 GOLD 1775635 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -12 LOW HALOGEN 2041324 NARROW BODY 1735842 BLACK HOUSING 1775628 90 DEGREE FLIP-LOCK 1775333 105 DEGREE FLIP-LOCK 2041070 60 POSITION 2041215 STUFFER RIGHT ANGLE GOLD FLASH BOTTOM SMT FLIP LOCK GOLD FLASH -12 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 -4 -6 -8 -10 -12 -16 -18 -20 -26 -30 -1 1.0mm pitch (PNs are ZIF and non-ZIF styles, see "FEATURES" for details） 1 PCB ACTUATOR PLATING ORIENTATION CONTACT TYPE MOUNT STYLE FEATURES IMAGE 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 BASE PN 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 POSITION SIZE VERTICAL N/A SMT -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 GOLD FLASH ZIF STUFFER TIN ZIF 84953 STUFFER TIN ZIF 84952 FLIP LOCK GOLD FLASH ZIF 2041084 non-ZIF 84982 N/A TIN non-ZIF 84984 non-ZIF 84981 non-ZIF 84983 non-ZIF 1734798 non-ZIF 1734779 STUFFER -24 -25 -26 -27 -28 -29 -30 1734248 -40 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 TOP SMT BOTTOM SMT -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 RIGHT ANGLE -4 -6 -8 -10 -12 -16 -25 -30 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 SMT VERTICAL N/A -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 T/H -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 SMT TOP N/A TIN -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 T/H RIGHT ANGLE -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 SMT BOTTOM N/A TIN -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 T/H 1.25mm pitch (All PNs are non-ZIF style) 1 PCB ACTUATOR PLATING ORIENTATION CONTACT TYPE MOUNT STYLE FEATURES IMAGE 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 BASE PN 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 POSITION SIZE -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 VERTICAL N/A non-ZIF 84534 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 T/H RIGHT ANGLE N/A TIN -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 TOP non-ZIF 84533 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 te.com/products/fpc 210-0264_CS3.indd 3 13.4.15 10:29:29 AM Frequently asked questions Question 1 Is there a pitch requirement for your interconnect need? Answer 1 TE offers FPC products from 0.25mm to 1.25mm centerline spacing. Question 2 Is your application in a high vibration environment? Answer 2 ZIF version FPC interconnects have a greater retention force and are suitable for high vibration applications. Question 3 Do you have a need for a higher number of mating cycles? Answer 3 ZIF version FPC interconnects allow for a greater number of mating cycles via the use of an actuator. Question 4 In your application, when the flex cable meets the board-mounted connectors, will the flex cable contact pads be face up or face down? Answer 4 If face down, use bottom contact versions. If face up, use top contact versions. FOR MORE INFORMATION TE Technical Support USA: Canada: Mexico Latin/S. America: Germany: UK: France: Netherlands: China: Center +1 (800) 522-6752 +1 (905) 475-6222 +52 (0) 55-1106-0800 +54 (0) 11-4733-2200 +49 (0) 6251-133-1999 +44 (0) 800-267666 +33 (0) 1-3420-8686 +31 (0) 73-6246-999 +86 (0) 400-820-6015 Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.te.com/leadfree te.com © 2013 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 5-1773461-0 (A4) CS 500 03/2013 TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. 210-0264_CS3.indd 4 13.4.15 10:29:34 AM