5-583616-2

Power Connectors & Interconnection Systems PageHead_12_HelvCdBd Hybrid Power Twin Leaf Connectors (Continued) Product Facts Specified for use in Thin Power Supplies (TPS) per the Server Systems Infrastructure (SSI) standard ■ High conductivity contacts — deliver 33% more current than traditional card edge connectors ■ Max. Operating temperature 105°C ■ 29 Dual Positions ■ Housing Accepts 4 – 18-20 AWG contacts — input power 24 – 20 AWG Contacts — output power 24 – 24-28 AWG contacts — signals Input Power Contacts Part Number 147431-2 18-20 AWG Output Power Contacts Part Number 147439-2 20 AWG Signal Contacts Part Number 583616-2 24-28 AWG Product Specification 108-2081 UL File NO. E28476 CSA File No. LR7189 R R *Consult Tyco Electronics engineering when paralleling contacts for power applications. Card Edge Products ■ The Hybrid Power Twin Leaf product combines the industry proven AMP Twin Leaf Card-Edge connector with high temperature plastics, high conductivity metals and a housing designed for both pcb or wire connection. Due to its thin overall profile and high current density performance, the Hybrid Power Twin Leaf connector was selected for the I/O connector of the “Thin Power Supply” section of the Server Systems Infrastructure (SSI) standard. This standard has been adopted throughout the high-end computer industry to allow interoperability of subsystems in a computer server. The Wire-to-Board version has been designed to accommodate up to 300V AC Input on 18 AWG wire and offers 24 DC Output wires (each on 20 AWG) and 24 Signal wires (each on 24-28 AWG). The cableto-board solution allows flexibility in routing inputs and outputs directly to input filtering devices and to the point of load for the outputs. The Hybrid version combines the wire inputs with traditional printed circuit board (pcb) solder tail outputs all in one connector. This can be appealing in some applications where the input power may not be suitably located near, or desired to be integrated with the output power. The hybrid version combines a right angle pcb mount section for the DC Signals and Output Power, along with a traditional crimp-snap contact for the Input Power. These connectors have been qualified to meet UL and CSA requirements and are rated at the industry standard 30°C T-Rise criteria. In addition, the connectors pass the finger probe test so the connectors can be energized while unmated. This is a requirement in N + 1 redundant power supply applications where power supplies may be removed, while the system is still powered. A key concern with any power connector is the temperature rise when the connector is under load. 153 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems PageHead_12_HelvCdBd Hybrid Power Twin Leaf Connectors (Continued) (Continued) Contacts 17.27 [.680] Materials and Finish 0.25 [.010] Max. Cutoff Tab Power — High Conductivity Copper Alloy Signal — Phosphor Bronze Plating — .000030 [0.00076] gold over nickel in contact area, tin plated in crimp area. 1.60 [.063] 0.76 [0.50] 0.51 [.020] Cutoff Tab Card Edge Products 3.43 [.135] POM 1.52 [.060] 2.54 [.100] Contact Type Wire Range AWG/mm2 Applicator P 16-20 0.6-1.4 Contact Part Numbers 5147431-2 5147439-2 S 24-28 0.08-0.2 5-583616-2 466577-4 1385306-3 — 1.51 [.060] 2 Plc Wire-to-Board Materials and Finish 78.69 [3.098] Housing — High temperature glass filled polyester Max. Operating temperature 105°C 2.03 [.080] 2 Plc M 11.94 [.470] 22.23 [.875] 8.00 [.315] 1.02 [.040] 3.15 [.124] M 0.76 [.030] 7.04 [.277] 81.71 [3.217] Ref. Section M-M Row A Row B 2.11 [.083] Ref. 3.15 [.124] 2.11 [.083] 1.78 [.070] Number of Positions 4-Input Power 24-Signal 24-Output Power Key Location Part Number 14,15 147354-8 Note: All part numbers are RoHS compliant. 154 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems PageHead_12_HelvCdBd Hybrid Power Twin Leaf Connectors (Continued) (Continued) Hybrids Wire/PCB-to-Board Materials and Finish Housing — High temperature glass filled polyester Max. Operating temperature — 105°C High Conductivity copper alloy PCB contacts .021 ± .014 [0.53 ± 0.36] M .150 [3.81] .150 ± .030 [3.81 ± 0.76] M .150 [3.81] Card Edge Products Section M-M Number of Positions 4-Input Power 24-Signal 24-Output Power Key Location Part Number 9,10 147351-1 Note: All part numbers are RoHS compliant. 155 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666