500901

5375 (08/13) TTDS-276 DATA SHEET - Public SPIRAP PLASTIC CABLE WRAP TECHNICAL DATA SHEET INTRODUCTION ................................................................................................................................... 1 SPIRAP PRODUCT CHARACTERISTICS .............................................................................. 2 SPIRAP PRODUCT CHARACTERISTICS (Continued) .................................................. 3 HAND TOOL............................................................................................................................................ 3 INTRODUCTION SPIRAP plastic wrap is a very practical way to bundle and harness cable, wire, tubing and hoses. Economical and quickly applied, it provides continuous abrasion protection. SPIRAP plastic wrap is pre-wound in continuous lengths; it can accommodate a wide range of wire bundle diameters. After application to cable bundles, the SPIRAP self-contracts to form a tight, uniform protective jacket for wire, cable, tubing or hoses. It is made of different materials to meet a range of requirements. THIS IS A CLASS 1 DOCUMENT WHICH IS NONCONFIDENTIAL. The information contained within this document is the property of TE Connectivity. It is supplied in confidence and the commercial security of the contents must be maintained. It must not be used for any purpose other than that for which it is supplied nor may any information contained in it be disclosed to unauthorised persons. It must not be reproduced in whole or in part without obtaining written permission from TE Connectivity (TE). te.com TE Connectivity, TE, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2021 TE Connectivity. All Rights Reserved. TE Proprietary & Confidential Information 1 of 3 Class I Data Classification - See Policy TEC-02-04 Rev [3] 24 August 2022 5375 (08/13) TTDS-276 DATA SHEET - Public SPIRAP PRODUCT CHARACTERISTICS SPIRAP Plastic Cable Wrap Color (Material) Part External Number Diameter 500000-1 500000-2 500001-1 500001-2 Natural (Polyethylene) 500002-1 142829-4 142830-2 142835-2 142831-1 Opaque White (Polyethylene) 500004-1 500005-1 500013-1 Natural (Nylon) 500013-2 500015-1 500017-1 500023-1 Natural (Fluoropolymer) 500023-2 500024-1 Black (Outdoor Polyethylene) 500030-1 500031-1 Internal Diameter Wall Thickness 0.126in 3.2mm 0.064in 1.62mm 0.031in 0.79mm 0.250in 6.4mm 0.162in 4.12mm 0.045in 1.14mm 0.500in 12.7mm 0.120in 3.0mm 0.36in 6.0mm 0.36in 6.0mm 0.472in 12.0mm 0.376in 9.56mm 0.060in 1.5mm 0.160in 4.0mm 0.200in 4.8mm 0.354in 9.0mm 0.062in 1.57mm 0.023in 0.75mm 0.040in 1.0mm 0.023in 0.6mm 0.060in 1.5mm 0.250in 6.4mm 0.500in 12.7mm 0.162in 4.12mm 0.376in 9.56mm 0.126in 3.2mm Length Max Bundle per Box Diameter Range Helical Pitch 50ft 15.24m 100ft 30.48m 50ft 15.24m 100ft 30.48m 50ft 15.24m 246ft 75m 0.63 – 0.500in 1.59 – 12.70mm 0.122in 5.54mm 0.188 – 2.000in 4.76 – 50.80mm 0.375in 9.53mm 0.375 – 4.000in 9.53 – 101.6mm 0.060 – 0.275in 1.5 – 7.0mm 0.500in 12.7mm 0.200in 5.00mm 98ft 30m 0.200in – 0.787in 5 – 20mm 0.472in 12.00mm 50ft 15.4m 0.393in – 3.937in 10 – 100mm 0.630in 16.00mm 0.045in 1.14mm 0.062in 1.57mm 50ft 15.24m 50ft 15.24m 0.188 – 2.000in 4.76 – 50.80mm 0.375 -4.000in 9.53 – 101.6mm 0.375in 9.53mm 0.500in 12.7mm 0.096in 2.44mm 0.015in 0.38mm 50ft 15.24m 100ft 30.48m 0.63 – 0.500in 1.59 – 12.70mm 0.122in 5.54mm 0.250in 6.4mm 0.500in 12.7mm 0.206in 5.24mm 0.436in 11.08mm 0.023in 0.58mm 0.032in 0.81mm 0.188 – 2.000in 4.76 – 50.80mm 0.375 - 4.000in 9.53 – 101.6mm 0.375in 9.53mm 0.500in 12.7mm 0.126in 3.2mm 0.086in 2.18mm 0.020in 0.51mm 0.0626 – 0.500in 1.59 – 12.70mm 0.122in 5.54mm 0.250in 6.4mm 0.176in 4.48mm 0.0230in 0.76mm 0.188 – 2.000in 4.76 – 50.80mm 0.375in 9.53mm 0.250in 6.4mm 0.500in 12.7mm 0.162in 4.12mm 0.376in 9.56mm 0.045in 1.14mm 0.062in 1.57mm 0.188 – 2.000in 4.76 – 50.80mm 0.375 -4.000in 9.53 – 101.6mm 0.375in 9.53mm 0.500in 12.7mm 50ft 15.24m 50ft 15.24m 100ft 30.48m 50ft 15.24m 50ft 15.24m Operating Temperature Drawing Number 500000 500000 -94 to 178°F -70 to 81°C 500001 500001 500002 142829 142830 -58 to 185°F -50 to 85°C 142835 142831 500004 -105 to 215°F -76 to 102°C 500005 500013 500013 -40 to 185°F -40 to 85°C 500015 500017 500023 -328 to 500°F -200 to 260°C 500023 500024 500030 -94 to 178°F -70 to 81°C 500031 TE Proprietary & Confidential Information 2 of 3 Class I Data Classification - See Policy TEC-02-04 Rev [3] 24 August 2022 5375 (08/13) TTDS-276 DATA SHEET - Public SPIRAP PRODUCT CHARACTERISTICS (Continued) SPIRAP Plastic Cable Wrap Color (Material) Part Number 142839-4 Black (Polyethylene) 142840-2 142841-1 External Diameter Internal Diameter Wall Thickness Length per Box Max Bundle Diameter Range Helical Pitch 0.120in 3.0mm 0.36in 6.0mm 0.472in 12.0mm 0.060in 1.5mm 0.160in 4.0mm 0.354in 9.0mm 0.023in 0.75mm 0.040in 1.0mm 0.060in 1.5mm 246ft 75m 98ft 30m 50ft 15.24m 0.060 – 0.275in 1.5 – 7.0mm 0.200in – 0.787in 5 – 20mm 0.393in – 3.937in 10 – 100mm 0.200in 5.00mm 0.472in 12.00mm 0.630in 16.00mm Operating Temperature Drawing Number 142839 -58 to 185°F -50 to 85°C 142840 142841 HAND TOOL A small hand tool is available to make application easier and more uniform. SPIRAP Hand Tool Part Number 500901 is included in each box, the SPIRAP Hand Tool increases the speed of application and permits uniform wrapping along the bundle length. The hand tool is slotted to use with all the above size of SPIRAP tubing. The hand tool can also be purchased separately. Figure 1, SPIRAP HAND TOOL Figure 2, SPIRAP HAND TOOL INSTRUCTIONS (included with each tool) TE Proprietary & Confidential Information 3 of 3 Class I Data Classification - See Policy TEC-02-04 Rev [3] 24 August 2022