5099427-2

Fiber Optic Products Catalog Switches Ruggedized Multimode Switches Refractive Plate Switch Part Number 6588871-1 Product Facts: No optical path interruption @200 G’s for 8 ms ■ Successfully passed MIL_S_901D (Navy) Heavyweight Shock Test (Barge Test) ■ Fiber type 62.5/125um multimode Tyco Electronics’ “Ruggedized” Refractive Plate Switch is a multimode optical switch that is capable of withstanding a 200 G shock with a duration of >8ms without interruption of the signal path. Specifications Operating Temperature Range — -30° to +85° C Storage Temperature Range — -40° to +85° C Durability — >1,000,000 cycles Minimum Actuation Voltage — 4.75 V Maximum Actuation Voltage — 5.25 V Actuation Current at Typical — 5.0 V Actuation Voltage — 100mA (maximum) Attenuators, WDMs, and Switches ■ This switch is designed for extreme environments that require absolute product quality on optical installations and optical signal integrity. Product Dimensions: 6 NOTE Dimensions are Inches over millimeters Recommended Mounting Layout Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant. 187 Catalog 1307895 Revised 3-06 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 52-55-1106-0800 C. America: 57-1-254-4444 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-208-420-8341 Fiber Optic Products Catalog Switches (Continued) Multimode 1 x 2 SPDT Switch Dual 1 x 2 DPDT Switch 2 x 2 Bypass Switch Product Facts ■ Low profile ■ Utilizes pivoting mirror ■ Wide wavelength range ■ Low insertion loss ■ Excellent repeatability ■ Environmentally stable ■ Shock and vibration resistant ■ Board or chassis mounting ■ Optical & electrical leads exit from one end for easy cable routing Tyco Electronics Low Profile Fiber Optic Switches are miniature, board mountable devices that permit the switching of an optical signal from one fiber to another. Switching is accomplished by a slight pivoting motion of a spherical mirror which reflects the optical signal to the appropriate fiber. This patented imaging technology provides very low optical loss. available in the following configurations: ■ ■ 1 x 2 SPDT Switch ■ Dual 1 x 2 DPDT Switch Tyco Electronics’ SPDT and DPDT Switches permit the transfer of optic signals from an input fiber to either of two output fibers. Switches are applied to the positive terminal. The switch reverts to its original state when power is removed. Tyco Electronics’ Fiber Optic Switches can be terminated with any Tyco fiber optic connector, and they are 2 x 2 Bypass Switch Tyco Electronics’ Bypass Switches provide bypass protection for fiber optic ring networks. They also provide bypass protection for fiber optic ring networks per IEEE 802.5 and ANSI FDDI standards. A self-test path permits testing the node's transmitter against its receiver when the switch is in the bypass mode. This transmitter receiver path is attenuated to prevent saturation of the receiver, while maintaining minimal light loss in the bypass path. Specifications Configuration 1 x 2 and Dual 1 x 2 2 x 2 Fully Reversing Bypass Switching speed 10 milliseconds maximum 10 milliseconds maximum Operating wavelength 750–1450 nanometers 750–1450 nanometers Insertion loss at 1300nm 0.8 dB max. per FOTP-34, Method A2 0.8 dB max. per FOTP-34, Method A2 5 dB on loopback path max Crosstalk ≤45 dB per FOTP-42 ≤45 dB per FOTP-42 Switch driver 5 V at 80mA max. 5 V at 80mA max. Drop In/Drop Out Drop In: 4.0 V minimum Drop In: 4.0 V minimum Voltage Drop Out: 0.5 V minimum Drop Out: 0.5 V minimum Fiber types Graded index 50/125, 62.5/125 Graded index 50/125, 62.5/125 (others available upon request) (others available upon request) Lead length 1 meter 1 meter Temperature range Operating –10°C to +65°C per FOTP-3, C2 Operating –10°C to +65°C per FOTP-3, C2 Storage –30°C to +70°C per FOTP-188, 4 Storage –30°C to +70°C per FOTP-188, 4 ST Style ST Style (others available upon request) (others available upon request) Bent pins for PCB soldering, Bent pins for PCB soldering, Connector styles Electrical interface straight pins for soldering, or straight pins for soldering, or AMP modular connector AMP modular connector Durability >1 million cycles >1 million cycles Weight (unconnectorized)