RF Coax Connectors
SMB Connectors
Product Facts
■
SMB offers snap-fit coupling
for quick connect/disconnect
■
Choice of Commercial or
High Rel Connectors
■
50 and 75 Ω MIL-Type
connectors available
■
Straight plugs and jacks are
completely crimp terminated
■
Fast easy cable assembly
■
Low VSWR
■
Standard military, commercial or Tyco Electronics
tooling
■
Listed under the Component
Program of Underwriters
Laboratories Inc.,
File No. E81956
■
PC Board soldered connectors are recognized under
the Component Program of
Underwriters
Laboratories Inc.,
File No. E81956
R
R
■
Certified by Canadian
Standards
Association
File No. LR 7189
R
SMB Connectors are available in commercial and
high rel versions. They are
ideally suited for circuit
miniaturization and are
offered in a wide range of
configurations including
plugs, right-angle plugs,
jacks, bulkhead jacks and
adapters, as well as printed
circuit board and solder
jacks.
Termination costs are kept
to a minimum using plugs
and jacks with a crimp center contact and hex crimp
outer braid. Both hand held
tooling and pneumatic
bench-mounted tooling is
available. Easily assembled
right-angle plugs have a
hex crimp on the outer
braid ferrule and bifurcated
solder center contacts.
Tyco Electronics’ 75 Ohm BT
43 SMB Connectors feature
unique spring mating with
snap-fit couplings for quick
connect/disconnect. These
connectors are designed
to be intermateable with
75 Ohm SMB MIL-C-39012
connectors. They also feature reliable dual crimp
cable terminations.
Packaging — All connectors are
packaged individually unless otherwise
noted under the “Military No. and/or
Comments” column in the connector
specifications chart.
Between Series Adapters
For SMB Between Series Adapters,
please see pages 251-260.
176
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connector Specifications
Electrical Characteristics
Environmental Characteristics
Impedance — 50 ohms and 75 ohms, nominal
Frequency Range — 0 to 4.0 GHz
Voltage Rating (VRMS) —
Sea Level
70,000 Feet
50 ohm connectors for RG 178/U series cable
300
75
50 ohm connectors for RG 316/U series cable
400
100
75 ohm connectors for RG 179/U series cable
300
75
75 ohm connectors for RG 195/U series cable
500
125
Insulations Resistance — 1000 megohms min.
Contact Resistance — (milliohms max.)
After
Initial
Environment
Center contact
6.0
8.0
Outer contact
1.0
1.5
Braid to body
1.0
N/A
Contact Current Rating — 1.5 amps DC max.
Voltage Standing Wave Ratio (VSWR0 —
to 4.0 GHz or 80% of upper cutoff frequency of the cable, whichever is lower.
Temperature Rating — –65°C to +165°C
Corrosion (salt spray) — MIL-STD-202, Method 101, test condition B, 5% salt
solution
Vibration High Frequency — MIL-STD-202, Method 204, test condition B
(15 G’s)
Shock — MIL-STD-202, Method 213, test condition B, 75 G’s at 6 milliseconds, 1 ⁄ 2
sine
Thermal Shock — MIL-STD-202, Method 107, test condition B, except high temperature shall be +85°C. High temperature shall be +200°C for connectors using
200°C cables.
Moisture Resistance — MIL-STD-202, Method 106, when interface gasket is
used. No measurements of high humidity. Insulation resistance shall be 200
megohms minimum within five minutes after removal from humidity.
Durability Test — Conducted per MIL-C-39012 Reg. Para. 3.15, Method Para. 4.6.12
Mating Engagement
Straight
Right-Angle
1.30 + .04F
1.45 + .06F
1.25 + .04F
1.35 + .04F
Cable
RG 178/U Series
RG 316/U Series
F=GHz, does not apply to 75 ohm connectors.
Materials
Body, Body Components and Male Contacts — Brass, half hard, per QQ-B-626,
Alloy 360, Zinc per QQ-Z-363
Female Contacts — Beryllium copper per QQ-C-530, heat treated per MIL-H-7199
Insulators — TFE fluorocarbon per ASTM D 1710, Type 1, Grade 1
Lockwashers — Phosphor bronze per QQ-B-750
Crimp Ferrule — Annealed copper alloy per WW-T-799
Gaskets — Silicone rubber per ZZ-R-765, Class 11B, Grade 65-75
RF High Potential Withstanding Voltage
Frequency — 5 MHZ
Leakage Current — N/A
50 ohm connectors for RG 178/U series cable
50 ohm connectors for RG 316/U series cable
75 ohm connectors for RG 179/U series cable
75 ohm connectors for RG 195/U series cable
RF Leakage — –55 dB min. at 2-3 GHz
Insertion Loss — .30dB max. at 3 GHz
Plating
Center Contacts — 0.00127 [.000050] min. Gold per MIL-G-452048 Type 1,
Grade C, Class 1, over 0.00254 [.000100] min. nickel per QQ-N-290
Other Metal Parts — Gold, Nickel or Solder plated to meet the Finish and
Corrosion requirements of MIL-C-39012
675 VRMS
950 VRMS
950 VRMS
1225 VRMS
Mechanical Characteristics
Engagement Forces — 14 lbs. [62.3 N] maximum engagement initially.
After 500 matings, 14 lbs. [62.3 N] maximum engagement and 2 lbs. [8.8 N] minimum
disengagement for all of SMBs.
Cable Attachment —
Straight Connectors — Crimp, both center contact and braid
Right-Angle Connectors — Crimp on braid and bifurcated solder center contact
Durability — 500 cycles per MIL-C-39012
Contact Captivation — When captivated, the contacts will withstand 4.0 lbs.
minimum axial force.
Cable Retention — When properly assembled to the compatible braided coaxial
cable, the retention is equal to the breaking strength of the cable.
Marking — Per MIL-STD-130
177
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm
Straight Plugs
6.35
[.250] Max.
21.10
[.830] Max.
RG/U
Cable
Center
Contact
Plating
Outer
Contact
Plating
Other
Metal Parts
Plating
Dielectric
Style
178, 178A, 178B,
196, 196A
Gold
Gold
Nickel
PTFE
MIL Type
413985-6
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Nickel
Gold
Nickel
Gold
Gold
Nickel
Gold
Gold
Gold
Nickel
Gold
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Gold
Nickel
Nickel
Nickel
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
MIL Type
MIL Type
MIL Type
Die Cast
Die Cast
MIL Type
Die Cast
Die Cast
MIL Type
MIL Type
Die Cast
MIL Type
413985-1
413985-3
413985-7
414946-1
5414946-2
1-413985-1
5414946-5
5414946-6
413985-2
413985-4
5414946-3
413985-8
174, 316,
188, 188A
179, 179A, 179B,
161, 187, 187A,
BELDEN 9221
RG 316,
188 Double Braid
Right-Angle Plugs
MIL Type
Die Cast
13.71
Max.
[.540]
13.71
[.540]
Max.
6.35 Dia.
[.250]
6.35
[.250] Dia.
RG/U
Cable
178, 178A, 178B,
196, 196A
174, 316, 188, 188A
179, 179A, 179B
161, 187, 187A
BELDEN 9221
RG 316,
188 Double Braid
BELDEN is a trademark of Belden Wire
and Cable Company.
Part
No.
13.21
[.520] Max.
13.21
[.520]
Max.
Center
Contact
Plating
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Outer
Contact
Plating
Gold
Gold
Gold
Gold
Gold
Nickel
Gold
Nickel
Gold
Gold
Gold
Other
Metal Parts
Plating
Gold
Nickel
Nickel
Gold
Nickel
Nickel
Nickel
Nickel
Gold
Nickel
Nickel
Dielectric
Style
Part
No.
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
MIL Type
MIL Type
Die Cast
MIL Type
MIL Type
MIL Type
Die Cast
Die Cast
MIL Type
MIL Type
Die Cast
414002-7
414002-8
5414363-8
414002-1
414002-3
414002-5
5414363-3
5414363-5
414002-2
414002-4
5414363-4
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
178
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
Straight Jacks
Commercial Jack
MIL Type Jack
5.56 Hex.
[.219]
25.40
[1.000]
Die Cast
Brass
RG/U
Cable
178, 178A, 178B, 196, 196A
174, 316,
188, 188A
RD 316, 188 Double Braid
Center
Contact
Plating
Gold
Gold
Gold
Gold
Body
Plating
Dielectric
Style
Jack
Part No.
Nickel
Nickel
Nickel
Nickel
PTFE
PTFE
PTFE
PTFE
MIL Type
MIL Type
Die Cast
Commercial
5414170-2
5414170-1
414948-1
414948-3
Bulkhead Jacks
6.35
[.250 ] Hex.
5/4.88 Dia.
[.197/.192]
28.60
[1.120]
RG/U
Cable
2.08/2.01
[.082/.079]
174, 316,
188,188A
RD 316, 188 Double Braid
Center
Contact
Plating
Gold
Gold
Gold
Body
Plating
Dielectric
Style
Nickel
Nickel
Nickel
PTFE
PTFE
PTFE
Commercial
Commercial
Commercial
Maximum Panel Thickness 2.36 [.093]
Bulkhead
Jack.
Part No.
5415006-1
5228217-1
5415006-2
Recommended Panel Cutout
for Bulkhead Jack and Adapter
Bulkhead Jack
Adapter
(Jack-Jack)
6.35
[.250] Hex.
17.53 Max.
[.690]
Type
Jack-To-Jack
Center
Contact
Plating
Gold
Gold
Body
Plating
Dielectric
Style
Part No.
Nickel
Gold
PTFE
PTFE
MIL Type
MIL Type
228553-1
228553-2
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
179
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
PC Board
Vertical Jacks
5.08
[.200]
Ø 1.60
[.063]
4 Plcs.
2.54
[.100]
A
5.08
[.200]
Ø 1.19
[.047]
B
Recommended
PC Board Layout
Jacks
Type
Center
Contact
Plating
Body
Plating
Dim.
A
Dim.
B
––
Gold
Gold
––
Gold
Nickel
––
Gold
Nickel
7.62
.300
7.62
.300
10.16
.400
3.94
.155
3.94
.155
3.94
.155
2.54
.100
8.25 Max.
.325
––
Gold
Tin
Style
Part
No.
PTFE
MIL Type
413990-1
PTFE
MIL Type
413990-2
PTFE
MIL Type
414612-2
PTFE
Brass,
Stamped
5221111-1
Dielectric
PC Board
Vertical Plugs
11.53 ± 0.20
[.454 ± .008]
A
B
6.35
[.250]
Sq.
3.94 ± 0.13
[.155 ± .005]
0.64
[.025]
6.32
[.249]
5.08 ± 0.05
[.200 ± .002]
Ø 1.60 4 Plcs.
[.063]
1.02 ± 0.05 Typ.
[.040 ± .002]
Ø 6.35
[.250]
Ø 0.97 ± 0.03
[.038 ± .001]
2.54
[.100]
5.08
[.200]
Ø 1.19
[.047]
Recommended
PC Board Layout
1.42
Typ.
[.056]
Plugs
Type
Center
Contact
Plating
Body
Plating
Dim.
A
Dim.
B
Low Profile (Plug)
Mated Pair
Gold
Nickel
3.94
.155
7.62
300
Dielectric
Recommended
PC Board
Layout
Style
Part
No.
B
MIL Type
415774-1
PTFE
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
180
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
PC Board,
Right-Angle Jacks
Jack Low Profile
Jack with Standoff Pads
12.70
[.500]
13.46
[.530]
A
Bulkhead Jack
19.87
[.782]
A
A
B
B
B
Jacks
Type
Center
Contact
Plating
Interface
Body
Plating
PCB
Leg
Plating
Gold
Gold
Gold
PTFE
Gold
Nickel
Nickel
PTFE
Gold
Gold
Gold
PTFE
Gold
Gold
Gold
PTFE
Gold
Gold
Gold
PTFE
Gold
Nickel
Nickel
PTFE
Gold
Nickel
Tin-Lead
PTFE
Gold
Nickel
Nickel
PTFE
Gold
Nickel
Nickel
PTFE
Gold
Gold
Gold
PTFE
Dielectric
Low Profile
With
Standoff Pads
Bulkhead
Commercial
Gold
Nickel
Tin
Bulkhead
Gold
Gold
Gold
Polypropylene
PTFE
Dim.
A
Dim.
B
Style
Recommended
PC Board
Layout
Part
No.
7.11
.280
7.11
.280
7.11
.280
8.76
.345
8.51
.335
8.76
.345
8.76
.345
8.76
.345
8.51
.335
7.67
.302
9.78
.385
7.67
.302
3.94
.155
3.94
.155
2.79
.110
2.79
.110
3.94
.155
3.94
.155
3.94
.155
2.79
.110
3.94
.155
2.79
.110
3.94
.155
2.79
.110
MIL Type
A
413996-2
MIL Type
A
413996-4
Die Cast
A
415340-1
Die Cast
A
415672-1
MIL Type
A
414026-2
MIL Type
A
414026-3
Die Cast
A
5414337-1
Die Cast
B
5415379-1*
Die Cast
A
415381-1
Die Cast
A
414963-1
Brass,
Stamped
C
5228435-1
Die Cast
A
1274330-1
* 5 leg design
PC Board,
Right-Angle Plug
5.08
[.200]
2.54
[.100]
13.46
[.530]
6.35
Dia.
[.250]
A
1.75 Dia.
[.069] Min.
(4 Holes)
5.08
[.200]
1.24 Dia.
[.049] Min.
Ø 1.75
[.069]
4 Plcs.
2.54
[.100]
5.08
[.200]
Ø 1.32
[.052]
5 Plcs.
2.54
[.100]
5.08
[.200]
Ø 1.24 ± 0.05
[.049 ± .002]
5.08
[.200]
B
A
B
5.08
[.200]
C
Recommended
PC Board Layouts
Plugs
Center
Contact
Plating
Interface
Body
Plating
PCB
Leg
Plating
Gold
Nickel
Nickel
PTFE
Gold
Nickel
Tin
PTFE
Dielectric
Dim.
A
Dim.
B
Style
Recommended
PC Board
Layout
8.76
.345
8.76
.345
2.79
.110
3.94
.155
Die Cast
B
Die Cast
A
Part
No.
415380-1*
5414338-1
* 5 leg design
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
181
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
Bulkhead PC Board Jack,
Solder Receptacle Kits
5/4.88
[.197/.192]
Dia.
6.35
Hex.
[.250]
3.71
[.146]
2.08/2.01
[.082/.079]
16.0
Max.
[.630]
Kit Includes Lockwasher
and Jam Nut
Type
Lockwasher and Jam Nut
Front Mount
Rear Mount
Center
Contact
Plating
Gold
Gold
Maximum Panel Thickness 2.36 [.093]
Recommended Panel Cutout
Body
Plating
Dielectric
Style
Nickel
Nickel
PTFE
PTFE
MIL Type
MIL Type
Kit
Part
No.
228216-1*
228215-1*
*includes Jam Nut and Lockwasher
Part No.
415001-2
Part No.
414969-2
SMB Receptacle Jack
4.45
[.175]
2.92
[.115]
3.18
[.125]
3.68
Dia.
[.145]
0.97 ± 0.13
Dia.
[.038 ± .001]
6.99
[.275]
1.02
[.040]
3.45
[.136]
Ref. Plane
6.35
Hex
[.250]
10-32 UNEF-2A
Type
Front Mount
Center
Contact
Plating
Gold
Body
Plating
Dielectric
Style
Part No.
Nickel
PTFE
MIL Type
414895-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
182
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, Mini 75 Ohm
Product Facts
■
Industry standard for miniature 75 ohm SMB
■
SMB offers snap-fit
coupling for quick
connect/disconnect
■
Suitable for high density
applications
■
Fast easy cable assembly
■
Low VSWR
■
Connectors offer consistent
mating and unmating forces
■
Straight plugs and jacks are
completely crimp terminated
■
Low cost
Mini 75 ohm SMB connectors are ideally suited for
circuit miniaturization in
communication, broadband
and switching equipment
as well as a variety of other
applications.
They offer the same low
consistent mating/unmating
force as Tyco Electronics
standard SMB products and
therefore, outer contact
resistance values are maintained from connector to
connector.
Standard military, commercial or Tyco Electronics tooling can be used to
terminate these products.
Cost effective assembly of
the straight plugs is completed with a crimp center
contact and hex crimp on
the outer braid. Right-angle
plugs have a hex crimp on
the outer braid ferrule and
bifurcated solder center
contacts.
Electrical Characteristics
Impedance — 75 ohms
Frequency Range — 0 to 4.0 GHz
Insulation Resistance — 1000 megohms
Contact Current Rating — 1.5 amps DC max.
Mechanical Characteristics
Engagement Forces — Initial—14.0 lbs. [62.3 N] maximum engagement.
After 500 matings, 14.0 lbs. [62.3 N] maximum engagement.
Durability—500 cycles
Environmental Characteristics
Temperature Rating — -65°C to +165°C
183
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, Mini 75 Ohm (Continued)
Straight Plug
Ø 1.73
[.068]
Ø 6.35
[.250]
Ø 2.64
[.104]
17.78
Ref.
[.700]
Center Contact
Plating
Gold
Gold
Gold
RG Cable
179, 187
179, 187
RD 179
Right-Angle Plug
Outer Contact
Plating
Gold
Nickel
Nickel
Body
Plating
Nickel
Nickel
Nickel
Part No.
5415487-1
5415487-2
5415487-3
13.7
Max.
[.539]
10.21
Ref.
[.402]
Ø 6.35
[.250]
9.78 ± 0.25
[.385 ± .010]
Center Contact
Plating
Gold
Gold
Gold
RG Cable
179, 187
179, 187
RD 179
Bulkhead Jack
Outer Contact
Plating
Nickel
Gold
Gold
16.0
Ref.
[.630]
Body
Plating
Nickel
Nickel
Nickel
Part No.
5415484-1
5415484-2
5415484-3
22.86
Max.
[.900]
Ø 3.66 ± 0.05
[.144 ± .002]
Ø 5.03
[.198]
4.52
[.178]
9.7
[0.38]
Recommended
PC Board Layout
10.92
[.430]
6.35
Hex.
[.250]
RG Cable
179, 187
Center Contact
Plating
Gold
Body
Plating
Nickel
Part No.
415500-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
184
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, Mini 75 Ohm (Continued)
Vertical PC Board Jacks
5.08 ± 0.08
[.200 ± .003]
7.62 ± 0.18
[.300 ± .007]
2.54 ± 0.08
[.100 ± .003]
Ø 0.71 ± 0.08
[.028 ± .003]
Ø 3.67
Max.
[.145]
Ø 1.32 ± 0.08
[.052 ± .003]
4 Plcs.
Leg
Length
2.11
.083
3.05
.120
3.05
.120
3.18
[.125]
Right-Angle PC Board
Jacks
5.08 ± 0.08
[.200 ± .003]
Recommended
PC Board Layout
Center Contact
Plating
Body
Plating
Part No.
Gold
Gold Flash
415504-2
Gold
Gold
415504-3
Gold
Gold Flash
415504-4
5.54
[.218]
5.08 ± 0.08
[.200 ± .003]
7.95 ± 0.25
[.313 ± .010]
2.54 ± 0.08
[.100 ± .003]
Ø 0.71 ± 0.08
[.028 ± .003]
5.08 ± 0.08
[.200 ± .003]
14.1
[.555]
Ø 1.32 ± 0.08
[.052 ± .003]
4 Plcs.
Recommended
PC Board Layout
Ø 3.71
Max.
[.146]
Leg
Length
2.79
.110
2.79
.110
2.11
.083
2.11
.083
4.50
[.177]
Right-Angle PC Board
Bulkhead Jacks
Center Contact
Plating
Body
Plating
Part No.
Gold
Gold
415490-1
Gold
Nickel
415490-2
Gold
Gold
415490-3
Gold
Nickel
415490-4
2.79
[.110]
5.08 ± 0.08
[.200 ± .003]
2.54 ± 0.08
[.100 ± .003]
Ø 0.71 ± 0.08
[.028 ± .003]
19.94
[.785]
2.36
Max.
[.093]
Panel
Thickness
11.18
[.440]
5.08 ± 0.08
[.200 ± .003]
Ø 1.32 ± 0.08
[.052 ± .003]
4 Plcs.
Recommended
PC Board Layout
Ø 3.71
Max.
[.146]
Note: Part Numbers are RoHS
compliant except: Indicates
non-RoHS compliant.
Leg
Length
2.79
.110
2.79
.110
2.79
.110
Center Contact
Plating
Body
Plating
Part No.
Gold
Nickel
415377-1
Gold
Gold
415377-2
Gold
Gold
415377-5*
*Isolated.
185
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ)
Product Facts
■
Widely used in data
transmission and telecommunication applications
■
BT 43 connector developed
from the SMB range and
feature snap-on and
latching variant
■
Most BT 43 connectors are
available as fully crimped
connectors.
■
BT 43 and 75 Ω connectors
available in solder and
crimp versions
The Tyco Electronics range
of 75 ohm SMB (SMZ)
connectors are designed
to meet the increasing
demands of the
Telecommunications
market, and are designed
in accordance with
BS9210 F0022.
Specifications
Max working voltage (dc) — 500 V
Max proof voltage (dc) — 1.5 kV
Contact resistance (inner) —
5 milliohm
Contact resistance (outer) —
1 milliohm
Bodies and other parts — Brass
Female center contacts —
Copper Alloy
Male center contacts —
Copper Alloy
Outer contacts — BeCu
Plating —
Contacts and critical surfaces — Gold
Other parts — Nickel
Insulators — P.T.F.E.
186
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
Straight Plugs, Snap-On
30.5
Assembled
[1.20]
28.0
[1.10]
8.8
Dia.
[0.35]
Cable Type
RG 179B/U
BT2002
20.4
[0.80]
Termination Method
Inner
Outer
Crimp
Crimp
Crimp
Crimp
Straight Plugs, Latching,
Crimp/Crimp
Body Plating
Part No.
Selective Gold
Selective Gold
1311097-1
1311098-1
29.9
Assembly
[1.18]
27.8
[1.09]
Cable Type
RG 179B/U
BT2003
BT2002
BT2001
BT3002, TZC75024
RG 59B/U,
RG 140/U, URM90
9.6 Dia.
[0.38]
Body Plating
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Part No
1311099-1
1311100-1
1311101-1
1311696-1
1311102-1
Selective Gold
1313507-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
187
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
Right-Angle Socket,
Snap-On, Solder/Crimp
17.93
Max.
[0.71]
21.67 Max.
[0.85]
16.86
[0.66]
10.16 Max. Max.
[0.40]
Cable Type
RG 179B/U
BT3002, TZC75024
Body Plating
Selective Gold
Selective Gold
Right-Angle Socket,
Latching, Solder/Crimp
Part No
1311103-1
1311104-1
23.0
Ref.
[0.91]
21.0
Ref.
[0.83]
16.3 Ref.
[0.64]
9.9 Ref.
[0.39]
Cable Type
RG 179B/U
BT2003
BT3002, TZC75024
RG 59B/U, RG 140/U
Body Plating
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Part No
1311106-1
1311698-1
1311111-1
1313508-1
30.4
Assembled
[1.20]
Straight Free Plug,
Crimp/Crimp
20.2
[0.80]
8.82 Dia.
[0.35]
Cable Type
RG 179B/U
5.60
[0.22]
Body Plating
Selective Gold
Part No
1408041-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
188
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
30.8
Assembled
[1.21]
Straight Bulkhead Plug
28.5
[1.12]
10.8
[0.43]
3.0 Max
[0.12] Panel
8.4
[0.33]
Dia.
5.6
[0.22]
7.5
[0.30]
Mounting Detail
Cable Type
RG 179B/U
BT500B, BT2003,
BT2003A
BT3002, TZC75024
Termination Method
Inner
Outer
Crimp
Crimp
Body Plating
Part No.
Selective Gold
1311120-1
Crimp
Crimp
Selective Gold
1311701-1
Crimp
Crimp
Selective Gold
1311122-1
32.1 Assembled Length
[1.26]
10.75 ± 0.05
[0.42 ± .002]
9.50 ± 0.10
[0.37 ± .004]
7.50 A/F
[0.30]
Panel Cut Out
Cable Type
3M: 043, 031C,
CS4456, Gore: GCX
8.00
Dia.
[0.31]
Termination Method
Inner
Outer
Body Plating
Part No.
Crimp
Selective Gold
1313511-1
Right-Angle Bulkhead Plug,
Solder/Crimp
Crimp
20.4
[0.80]
16.7
Ref.
[0.66]
21.5
Ref.
[0.85]
10.1
Ref.
[0.40]
Cable Type
RG 179B/U
Body Plating
Selective Gold
Part No
1311115-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
189
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
30.4
Assembled
[1.20]
DDF Plug,
Crimp/Crimp
27.9
[1.10]
10.3
Dia.
[0.41]
Cable Type
RG 179B/U
BT2003
BT2002
B2001
BT3002, TZC75024
RG 59B/U, RG 140/U,
URM90
Body Plating
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Part No
1327083-1
1311117-1
1311700-1
1313883-1
1311118-1
Selective Gold
1313887-1
DDF Plug,
Crimp/Crimp
7.54
Ref.
[0.30]
27.8
Ref.
[1.09]
Cable Type
RD179, 124431 (Filotex),
1366 (Orebro), K02253D-1,
K02253-2 (Shuner)
PC Board Plug 43/1D
Body Plating
Part No
Selective Gold
1314422-1
PC Board Plug 43/1E
11.4
[0.45]
6.20
Dia.
[0.24]
3.80
[0.15]
0.90
Dia.
[0.04]
5.08
[0.20]
13.2
[0.52]
5.08
[0.20]
15.0
[0.59]
1.70 Dia.
[0.07] 4 Holes
5.08
[0.20]
9.5
[0.37]
1.20 Dia.
[0.05] 1 Hole
6.5
[0.26]
Sq.
1.70 Dia.
[0.067] 4 Holes
Mounting Detail
Body Plating
Selective Gold
Body Plating
Selective Gold
22.14
[.872]
5/16-32
UNEF
Ø 8.21
[.323]
3/8 Across Flats
Ø 8.35 ± 0.10
[.329 ± .004]
Ø 1.20
Min.
[.047]
Ø 1.70 Min.
[.067] 4 Holes
2.54
[.100]
Ø 6.22
[.245]
2.90 ± 0.10
[.114 ± .004]
Part No.
1314103-1
5.08
[.200]
5.08
[.200]
14.00
[.551]
1.20 Dia.
[0.047] 1 Hole
Mounting Detail
Part No.
1311125-1
Right-Angle PC Board Plug
5.08
[0.20]
2.54
[.100]
Mounting Detail
Panel Cutout Detail
Part No. 1314102-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
190
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
Straight Adapter
Plug-Plug
17.1
[0.67]
17.0
[0.67]
7.5
[0.30]
11.0
Dia.
[0.43]
8.7
A/F
[0.34]
8.0
Dia.
[0.31]
2.2 Max.
[0.09] Panel
Part No. 1313364-1
Mounting Detail
Part No. 1311127-1
Body Plating
Selective Gold
Selective Gold
Tester 430A
Part No.
1313364-1
1311127-1
37.4
[1.47]
11.1
[0.44] Dia.
8.8
Dia.
[0.35]
Body Plating
Selective Plating
Extraction Tool 65A
Part No.
6-1311703-1
100.0
[3.94]
10.0
Dia.
[0.39]
Part No.
1311164-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
191
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
RF Coax Connectors
SMB Connector Crimp Tooling
50 Ω/75 Ω
RG/U
Cable
Commercial Connector Tooling
MIL Type Connector Tooling
Center Contact Crimp Tooling
Braid Crimp Tooling
Center Contact Crimp Tooling
Braid Crimp Tooling
MIL-CDies for
Dies for
Dies for
MIL-C22520/2-01
Tyco Electronics
Tyco Electronics
Tyco Electronics
22520/5-01
DANIELS* DANIELS*
DANIELS
Selector
Tool
PRO-CRIMPER
PRO-CRIMPER
PRO-CRIMPER
Tool
Hand
Positioner
Hand
Position
Hand
Tool
Hand
Tool
Hand Tool DANIELS* Position
DANIELS* Hex
Tool
Number
Tool
Number
Crimp
Die
Positioner
Number Position
Number Position
178, 178A,
178B, 196,
58489-1
196A
Double Braid
—
178, 196
174, 316
58489-1
188, 188A
Double Braid
174, 316,
58489-1
188
Double Braid
174, 316,
58489-1
188
179, 179A
179B, 161,
58489-1
187, 187A,
BELDEN 9221
179, 179A
179B, 161,
58489-1
187, 187A,
BELDEN 9221
180, 180A
—
180B
Mini SMB 75 ohm
179, 187
—
179, 187
—
Hex Die
Across
Flats
Female-K699
Male-K727
4
58489-1
A&B
Y624
AFM8
Female-K699
Male-K727
4
58483-1
A
HX4-1637
2.67
.105
—
—
—
—
—
AFM8
4
58483-1
B
HX4-1637
Female-K699
Male-K727
4
58489-1
A
Y444
AFM8
Female-K699
Male-K727
Female-K699
Male-K727
4
58483-1
B
HX4-1637
3.25
.128
3.25
.128
Female-K699
4
58489-1
C
Y196
Location A
AFM8
Female-K699
4
58483-1
C
HX4-1637
3.84
.151
Male-K727
4
58489-1
C
Y196
Location A
AFM8
Solder
—
58483-1
B
HX4-1637
3.25
.128
Female-K699
4
58489-1
A
Y444
AFM8
Female-K699
4
58483-1
B
HX4-1637
3.25
.128
Male-K727
4
58489-1
A
Y444
—
Solder
—
58483-1
B
HX4-1637
3.25
.128
—
—
—
—
—
—
Solder
—
58483-1
C
HX4-1637
3.84
.151
Female-K699
Solder
Center
Contact
—
58483-1
B
HX4-1637
—
—
—
—
—
—
—
—
58483-1
B
HX4-1637
—
—
—
—
—
—
—
Note: All 75 ohm SMB connectors have a solder center contact.
* DANIELS Manufacturing Corporation
6103 Anno Avenue
Orlando, Florida 32809
Telephone: 407-855-6161
FAX: 407-855-6884
Note: Equivalent military tool part numbers–
M22520/5-01 – DANIELS Hand Tool HX4
M22520/5-33 – DANIELS Die Set Y136
M22520/5-37
M22520/5-41
M22520/5-03
M22520/2-01
–
–
–
–
DANIELS
DANIELS
DANIELS
DANIELS
Die Set Y138
Die Set Y140
Die Set Y196
Hand Tool AFM8
BELDEN is a trademark of Belden Wire
and Cable Company.
DANIELS is a trademark of Daniels
Manufacturing Corporation.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
192
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
工商网监
湘ICP备2023018690号
