5332225

RF Coax Connectors Twin BNC Connectors Product Facts ■ Crimp connectors require only one-stroke crimping of both conductors, plus braid and cable support ■ Lower installed cost with one-stroke crimp ■ Reduced noise levels because of Tyco Electronics solderless crimping techniques ■ Captive inner contact stability ■ No danger of heat damage to coaxial cable ■ Ease of inspection ■ Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 R ■ PC Board soldered connectors are recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 R ■ Certified by Canadian Standards Association File No. LR 7189 The Twin BNC Connector is a quick connect/disconnect, weatherproof connector designed in accordance with MIL-C-39012 to meet the stringent requirements of MIL-STD-1553 Multiplex Data Bus. These twin coaxial cable connectors are a unique development by Tyco Electronics which has resulted in the production of high level RF components. Termination of these connectors to twin conductor cable is made with Tyco Electronics exclusive one crimp method which simultaneously terminates inner conductors, outer braid and cable support with one stroke of the matching Tyco Electronics tool. These rugged connectors accommodate today’s most commonly used twin conductor cable sizes. Electrical Characteristics Environmental Characteristics Nominal Impedance — Non-constant Working Voltage — 500 volts rms sea level Insulation Resistance — 5000 megohms min. Dielectric Withstanding Voltage — 1500 volts rms sea level Temperature Range — -55°C to +85°C Vibration — MIL-STD-202, Method 204, Condition B Shock — MIL-STD-202, Method 213, Condition I, 100 G’s Salt Spray — MIL-STD-202, Method 101, Condition B Temperature Cycling — MIL-STD202, Method 102, Condition C Mechanical Characteristics R Materials Brass — QQ-B-626 Beryllium Copper — QQ-C-530 PTFE — MIL-P-19468 Polypropylene — General purpose Copper, Annealed — QQ-C-576 Phosphor Bronze — QQ-B-750 Silicone Rubber — ZZ-R-765 Mating/Unmating — Bayonet lock-quick connect/ disconnect Cable Attachment — Crimp type Simultaneous center and braid Coupling Nut Retention — 100 lbs. [444 N] min. Cable Retention — 25 lbs. [111 N] min., RG 108A/U cable Durability — 200 cycles per MIL-C-39012 Plating Packaging — All connectors are packaged individually unless otherwise noted. Silver — QQ-S-365 Nickel — QQ-N-290 Tin — ASTM-B-545 89 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Twin BNC Connectors (Continued) Plugs 33.74 Max. [1.328] 14.61 Dia. [.575] Max. RG/U Cable 108, 108A BELDEN 9272, 89272 Center Contact Plating Silver Silver Body Plating Dielectric Integral Die Hand Tool Part No. Silver Nickel PTFE Polypropylene 69667 69667 5332225 5332225-5 Silver Silver PTFE 69667 5332225-3 Silver Nickel Polypropylene 69667 5332225-6 TROMPETER TWC-124-2 ROLM 49D2401 RAYCHEM 7824D013 Bulkhead Jack +0.13 12.83 -0.00 Dia. [.505 +.005 -.000 ] +0.13 11.05 -0.00 [.435 +.005 -.000 ] H 38.1 Max. [1.500] Maximum Panel Thickness 3.18 [.125] Recommended Panel Cutout H = 17.45 [.687] Max. across flats, 20.32 [.800] Max. across points RG/U Cable Center Contact Plating Body Plating 108, 108A BELDEN 9272, 89272 Silver Silver Dielectric CERTI-CRIMP Hand Tool with Integral Die Integral Die Hand Tool Die Insert for Tools: Hand Tool-69710-1, 626 Pneu. Head 318161-1 Part No. PTFE -5— 69667 69708 5332342 BELDEN is a trademark of Belden Wire and Cable Company. ROLM is a trademark of the Rolm Corp. TROMPETER is a trademark of Trompeter Electronics, Inc. Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant. 90 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Twin BNC Connectors (Continued) Right-Angle PC Board/ Panel Mount Jacks 15.88 Mtg. [.625] Hgt. +0.13 12.83 -0.00 Dia. [.505 +.005 -.000 ] Material Body — VALOX, White Center Contacts — Gold Dielectric — Polymethylpentene 36.83 Max. [1.450] +0.08 5.54 -0.00 [.218 +.003 -.000 ] Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout With Mounting Posts Part No. 5228686-1 2.01 ±0.05 [.079 ±.002] Dia. (2 Holes) 10.16 ±0.08 [.400 ±.003] 5.08 ±0.08 [.200 ±.003] 6.35 ±0.08 [.250 ±.003] 2.54 ±0.08 [.100 ±.003] 1.6 ±0.05 [.063 ±.002] 3.2 ±0.08 [.126 ±.003] 0.89 ±0.08 [.035 ±.003] Dia. (3 Holes) Recommended PC Board Layout +0.13 12.83 -0.00 Dia. [.505 +.005 -.000 ] Vertical PC Board/ Panel Mount Jacks +0.08 5.54 -0.00 [.218 +.003 -.000 ] 35.56 Mtg. [1.400] Hgt. Material Body — VALOX, White Center Contacts — Gold Dielectric — Polymethylpentene Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout With Mounting Posts Part No. 5221198-1 3.2 ±0.13 [.126 ±.005] Lockwasher and Jam Nut 1.6 ±0.05 [.063 ±.002] 5.08 ±0.08 [.200 ±.003] 10.16 ±0.08 ±0.08 [.400 ±.003] 2.54 [.100 ±.003] Part No. 1-329632-2 0.89 ±0.05 [.035 ±.002] Dia. (3 Holes) Part No. 1-329631-2 2.01 ±0.05 [.079 ±.002] Dia. (2 Holes) VALOX is a trademark of General Electric Company. 5.08 ±0.08 [.200 ±.003] 10.16 ±0.08 [.400 ±.003] Recommended PC Board Layout Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant. 91 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Twin BNC Connectors (Continued) Vertical PC Board Mount Jack 10.16 ±0.08 [.400 ±.003] +0.13 12.83 -0.00 Dia. [.505 +.005 -.000 ] 2.01 ±0.05 Dia. [.079 ±.002] 2 Plcs. 5.08 ±0.08 [.200 ±.003] 0.89 ±0.05 Dia. [.035 ±.002] 2 Plcs. 1.17 ±0.08 Dia. [.046 ±.003] Plating Body — Nickel Center Contacts — Gold Dielectric — Polymethylpentene +0.08 5.54 -0.00 [.218 +.003 -.000 ] Part No. 5415832-1 Recommended Panel Cutout 3.48 ±0.08 [.137 ±.003] 3.20 ±0.13 [.126 ±.005] 10.16 ±0.08 [.400 ±.003] PCB Configuration Bulkhead Jack Adapter +0.13 12.83 -0.00 Dia. [.505 +.005 -.000 ] Plating Body — Silver Center Contacts — Silver H 11.05 ±0.08 [.435 ±.003] 35.72 Max. [1.406] Maximum Panel Thickness 3.18 [.125] H = 17.45 [.687] Max. across flats, 20.32 [.800] Max. across points Recommended Panel Cutout Part No. 5332215 Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant. 92 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208