AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Circular Plastic Connector Sealing Accessories
A
Sealing Caps
for Receptacles only
B ±.015
[±0.38]
Sealing caps are used to protect
exposed contacts of unmated
receptacles.
3.000±.030
[76.2±0.76]
.143
Dia.
[3.63]
Material and Finish
Plastic Strap
Cap—Thermoplastic, heat stabilized,
fire resistant, self-extinguishing, 94V-1
rated, black
Sealing Gasket—Neoprene, black
Bead Chain—Steel, nickel plated
Bead Chain Coupling—Brass, plated
nickel
Shell
Size
Series
11
1&2
13
1
17
1,2,& 3
23
1, 3, & 4
2
Dimensions
A
B
.360
.927
9.14
23.55
.360
1.055
9.14
26.80
.360
1.295
9.14
32.89
.460
1.728
11.68
43.89
Plastic Strap
Part No.
Metal Bead Chain
Part No.
206903-1
208800-1
211870-1
213485-1
207445-1
208652-1
207446-1
207446-2
208680-1
208680-2
A Min.
Cable Entry Seals
Heat Shrinkable Sealing Boots
Jacketed Cable
Cable entry seals are used with
jacketed cable to provide an
environmentally sealed wire-toconnector system. They can be used
with either plugs or receptacles.
CPC Sealing Accessories
Thick Wall Boots
B Dia.
Min.
A
11
2.500
63.50
Material
Internal Sleeve—Nylon
Outer Tubing—Polyolefin, black
13
17
23
B
Expanded
Wall
Thickness
Sealing
Range
(Dia.)
.625
15.88
.050 Ref.
1.27 Ref.
.250 - .600
6.35 - 15.24
.775
19.68
Ref.
.060 Ref.
1.52
.250 - .375
6.35 - 9.53
.375 - .725
9.53- 18.42
.975
24.76
.060 Ref.
Ref.
1.52
.400 - .875
10.16 - 22.22
Max. Recovered
Inside
Diameter
.160
4.06
.250
6.35
.220
5.59
.300
7.62
ef.
.375
9.52
.
1.250
31.75
.070 Ref.
1.78 Ref.
.550 - 1.250
13.97 - 31.75
.500
12.70
Dimensions
Shell
Size
2.500
63.50
2.500
63.50
3.000
76.20
3.000
76.20
15/16-20 UNEF 38 THD
Part
No.
54010-4
54010-1
54123-2
54123-1
54011-1
54011-3
54012-1
Threaded Sleeve
Thin Wall Boot
Tubing with Sealant
1.027
[26.09]
Dia.
Material
Inter Sleeve—Nylon
Outer Tubing—Polyolefin
Expanded Wall Thickness—
.020 [0.51]
Max. Recovered Wall Thickness—
.040 [10.16]
Sealing Range—.250 [6.35].500 [12.70] Dia.
.625±.015
[15.88±0.38]
Dia.
.875±.010
[22.22±0.25]
2.000±.025
[50.80±0.64]
Shell Size 17
Part No. 213933-1
52
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Circular Plastic Connector Sealing Accesories (Continued)
Jacketed Cable Seals
(for Shell Size 23)
3.500±.030
[88.9±0.76]
A jacketed cable seal kit provides an
environmentally sealed connection
for jacketed cable.
+.000
1.095
[27.81]
Dia.
1.290–0.15
[32.77–0.38]
Dia.
Material
Peripheral Seal—Grey elastomer
Collar—Aluminum
Jacketed Cable Seal—Black
rubber
Back-Shell Extender—Black
glass-filled thermoplastic
Special Clamp Saddle—Black
thermoplastic
Note: Jacketed cable seals must be
used with large cable clamps and
can be used on plugs or receptacles.
Large cable clamps are to be
ordered separately (see page 38).
Each jacketed cable seal kit
includes:
• Peripheral Seal—to be
discarded if kit is used on plug.
Additional seals may be
purchased (see page 51)
• Collar—provides bearing surface
for back-shell extender
• Jacketed Cable Seal
• Back-Shell Extender
• Special Clamp Saddle—to be
used in lieu of clamping insert
supplied with large cable clamp
See Sealing
Range (Dia.)
Female
Special
Clamp
Saddle
Plug
(See Note)
Jacketed
Cable Seal*
Collar
Back-Shell
Extender
Large Cable Clamp
Part No. 206512-5
(See Note)
Sealing
Range
(Dia.)
.300-.450
7.62-11.43
.450-.600
11.43-15.24
.600-.875
15.24-22.22
*Jacketed cable seal is pressed flush against rear
connector face when back-shell extender is threaded
onto rear of connector.
Rubber Boot
Kit
Number
207052-1
207052-2
207052-3
1.800±.020
[45.72±0.51]
Rubber boots are used with
jacketed cable to provide splashproof connections for Series 1
and Series 3 connectors.
(Not for Metal Shell Connectors.)
B ±.010
[±0.25]
CPC Sealing Accessories
A ±.010
[±0.25]
C
D
Material
Black neoprene
Plug
(See Note 1)
Rubber
Boot
Jacketed
Cable
Shell
Size
11
Cable Dia.
Sealing Range
.219-.438
5.56-11.13
A
.750
19.05
Dimensions
B
C
.300
.600
7.62
15.24
D
.170
4.32
Part
No.
206304-1
Notes: 1. Rubber boots are recommended for use with jacketed cable and can be used on plugs or receptacles,
except Series 2 connectors.
Notes: 2. For detailed performance data on rubber boots, refer to Product Specification No. 108-10024.
53
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Circular Plastic Connector Sealing Accesories (Continued)
Flexible Cable Protection
System
Product Facts
■
For cables that require
better protection
■
Fittings allow more
reliable connections to
be made
■
Sealed fittings enhance
reliability of machinery
operating under many
extreme environmental
conditions encountered
in manufacturing and
construction industries
Related Product Data
Catalog 1654227
Identification Products
High-quality, complete
systems are available
combining innovative
technology with rapid
in-stock availability
Technical Documents
■
Conforms with the latest
industry standards
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.
on applied products as
marked.
Application Specifications
114-18274 FLEXAgraff-AS, -PU-AS,
-ME-ASF Metal Conduits
114-18275 FLEXAgraff-CU Metal
Conduits
114-18276 AIRflex-KUW-PU
Plastic Conduits
114-18277 ROHRflex-PA 6,
ROHRflex-PA 6 S, ROHRflexPA 12 Plastic Tubing
■
R
■
Certified by Canadian
Standards
Association on
applied products as marked.
Product Specifications
108-1696 FLEXAgraff Metal Conduits
108-1696-1 ROHRflex Plastic Tubing
108-1696-2 AIRflex Plastic Conduits
R
CPC Sealing Accessories
■
Certified by VDE on
applied products
as marked.
Typical Industrial Application
Circular Plastic Connectors (CPC) / FLEXAquick-System Selection Aid
CPC
Shell
Size
11
13
17
23
Female
ROHRflex quick
Connector
1-969807-2
1-969809-3
1-969811-4
2-969813-5
ROHRflex-PA 6
Plastic
Tubing
969789-2
969789-3
969789-4
969789-5
Male
ROHRflex quick
Connector
969803-2
969803-3
969803-4
969803-5
Male
ROHRflex quick
Elbow Connector
969817-2
969817-3
969817-4
969817-5
Counternut
796260-2
796260-3
796260-5
796260-6
Flat
Sealing
Washer
796257-2
796257-7
796257-8
796257-9
NOTE:
Request Flexible Cable Protection
System Catalog 1307244.
54
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Engineering Notes
55
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
MIL-C-5015 Style Circular Plastic Connectors (CPC)
Product Facts
n Intermateable with other
manufacturers’ Metal-Shell
Sizes 20-14 and 18-10,
MIL-C-5015 Style
Connectors
n High impact resistant plastic
housing
n Lighter weight
n Lower cost
n Industry accepted, Type III+
pin and socket contacts,
available on reels in stripform for high volume, low
cost, automatic machine
terminations
n Contacts also available in
loose piece form for low
volume, prototype or
maintenance and repair
n Housing designed to prevent
mismating with other insert
arrangements
n Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
n Certified by
Canadian Standards
Association,
File No. LR 7189
R
MIL-C-5015 Style
Circular Plastic Connectors
R
This new addition to the
AMP Circular Plastic
Connector Line is
specifically designed to be
intermateable with other
manufacturers’ Metal-Shell
sizes 20-14 and 18-10,
MIL-C-5015 Style Connector
Systems. The high impact
resistant plastic housing
offers the advantages of
lighter weight and lower
cost than existing metal
shell connectors. In
addition, the connector
design prevents mismating
when used with other insert
arrangements. As part of
the AMP Multimate Family of
Connectors, the MIL-C-5015
style connector offers the
additional economies of
crimp Type III+ Pin and
Socket contacts in reelmounted, strip-form for high
volume automatic machine
termination, as well as in
loose piece form for low
volume, prototype or
maintenance and repair.
Technical Documents
Application Specification
114-10004 Contacts, Type III+
Product Specifications
108-10024 CPC Connectors
108-10042 Contacts, Type III+
Instruction Sheets
408-7582 Accessories for
CPC Connectors
408-7592-A Improved Strain
Relief Clamps for
CPC Connectors
408-7593 CPC Connectors
56
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
MIL-C-5015 Style Circular Plastic Connectors (CPC), Shell Size 20-14
Plug Kit, Unassembled
5-20 Self Tapping Screw,
Quantity 2
Reverse Sex (Accepts pins)
Part Number 213571-2
without Cable Clamp
.625
[15.88]
Standard Sex (Accepts sockets)
Part Number 213652-1
without Cable Clamp
2.839±.040
[72.11±1.02]
Clamping Inserts
.703
[17.86]
Max. Outside Dia.
Assembled with Cable Clamp
Cable Clamps
Part No.
Type
206070-8
standard
206322-9
large
O.D.
Max.
.453
[11.51]
.703
[17.86]
1.180
[29.97]
Dia.
15/16-20 UNEF
1.045±.003
[26.54±0.08]
Dia.
Coupling Ring
1.635
[41.53]
Max.
1.565
[39.75]
Max. Dia.
1.470
[37.34]
Max. Dia.
1.131±.025
[28.73]
Dia.
Standard Sex
1.180
[29.97]
Dia.
15/16-20 UNEF
1.665±.030
[42.04±0.76]
.161
[4.09]
1.174±.010
[29.82±0.25]
1.045±.003
[26.54±0.08]
Dia.
1.635
[41.53]
Max.
Receptacle, Square Flange
Reverse Sex
Reverse Sex (Accepts sockets)
Part Number 213570-1
Standard Sex (Accepts pins)
Part Number 213651-1
1.500±.025
[38.10±0.64]
1.156±.010
[29.36±.025]
Typ.
1.500±.025
[38.10±0.64]
1.210
Max.
[30.73]
1.165±.010
[29.59±0.25]
Dia.
1.156±.010
[29.36±.025]
Typ.
.125+.007
- 0.00
+.018
- 0.00
.578
[14.68]
1 1/4-18 UNEF
Mating Face
Reverse Sex
1.500±.025
[38.10±0.64]
1.156±.010
1.500±.025
[38.10±0.64]
1.560
Max.
[39.62]
[29.36±.025]
Typ.
1.156±.010
[29.36±.025]
Typ.
1.156±.010
[29.36±0.25]
Typ.
1.410/1.350
[35.81/34.29]
Dia.
1.156±.010
[29.36±0.25]
Typ.
1.165±.010
[29.59±0.25]
Dia.
Mating Face
.578
[14.68]
Panel Cutout
1 1/4-18 UNEF
Mating Face
Receptacle, Free-Hanging
4 Plc.
1.210
Max.
[30.73]
Standard Sex
1.165
[29.59]
Dia.
Reverse Sex (Accepts sockets)
Part Number 213650-1
15/16-20 UNEF
1 1/4-18 UNEF
57
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
MIL-C-5015 Style
Circular Plastic Connectors
[3.18 ]
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
MIL-C-5015 Style Circular Plastic Connectors (CPC), Shell Size 18-10
Plug Kit, Unassembled
1.174±.010
[29.82±0.25]
1.620±.010
[41.15±0.38]
.560
[14.22]
Reverse Sex (Accepts pins)
Part Number 213671-1
without Cable Clamp
1.435±.010
[36.45±0.25]
Dia.
.925±.003
[23.50±0.08]
Dia.
15/16-20 UNEF
Receptacle, Square Flange
Reverse Sex (Accepts sockets)
Part Number 213667-1
1 1/18-18 UNEF
Coupling Ring
1.375±.015
[34.92±0.38]
.125+.007
- 0.00
1.062±.010
1.375±.015
[34.92±0.38]
1.450±.010
[36.83±0.25]
[26.97±0.25]
Typ.
1.285/1.320
[32.64/33.53]
Dia.
1.062±.010
[26.97±0.25]
Typ.
.531
[13.49]
Panel Cutout
1.200±.010
[30.48±0.25]
Reverse Sex (Accepts sockets)
Part Number 213668-1
4 Plc.
1.062±.010
[26.97±0.25]
Typ.
1 1/18-18 UNEF-2A
Receptacle, Free-Hanging
+.018
- 0.00
.531
[13.49]
.990±.010
[25.15±0.25]
Dia.
1.062±.010
[26.97±0.25]
Typ.
[3.18 ]
1.115±.004
[28.32±0.10]
Dia.
1 1/18-18 UNEF-2A
15/16-20 UNEF-2A
Type III+ Contacts
Material
Contact—Brass
Spring—Stainless Steel
MIL-C-5015 Style
Circular Plastic Connectors
Contact Finish
.535
[13.59]
A—.000030 [0.00076] gold on the
electrical engagement area over .000030
[0.00076] min. nickel
B—Tin
Socket
Pin***
Related Product Data
Application Tooling—Pages 76-79
Wire Size Range
AWG
mm2
Ins. Dia.
Range
Contact
Finish Code
24-20
0.2-0.6
.060-.135
1.52-3.43
B
A
18-14
0.8-2
.110-.150
2.79-3.81
B
A
Strip Form Contact No. Loose Piece Contact No.
Pin
Socket
Pin
Socket
213605-7 1-66563-1
—
66565-7
—
66563-8
—
66565-4
213603-5
213603-3
66598-9
66598-2
213603-6
213603-4
66601-9
66601-2
Strip Form
Applicator
Hand Tool
Part No.
567363-□††
91542-15
466958-1†† (for Sockets)
or 567364-□††
91521-15
or 567834-1†† (for Sockets)
††
Note: Applicators for AMP semiautomatic or fully-automatic termination equipment are available. Contact Technical Support.
***MIL-C-5015 style connectors require a longer Multimate pin contact. This contact is .145 [3.68] longer than the standard Multimate pin contacts. It is not for
use in other Multimate connectors, socket contacts are standard Multimate Type III+ contacts.
Extraction Tool Part No. 305183
Note: Gold-plated contacts should not be mated with tin or silver plated contacts.
5
To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No 217201-1,
Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated).
58
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Engineering Notes
59
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Metal-Shell Circular Plastic Connectors
Product Facts
■
■
■
■
■
Economical combination
of thermoplastic
UL 94V-0 rated connector
housings and metal shells
Available in three sizes:
■ Series 1–Accepts
Multimate contacts, shell
sizes 14-5, 14-7, 22-16,
28-24, and 28-37 standard
sex; 14-5, 14-7, 22-14,
and 28-37 reverse sex
■ Series 2–Accepts 20 DF
and 20 DM contacts, shell
sizes 22-28 and 28-63
standard sex; 22-28 and
28-57 reverse sex
■ Series 3–Accepts Type XII
power contacts, shell
sizes 22-3 and 28-7
standard and reverse sex
Series 4–Accepts Multimate
contacts, and Type XII
power contacts, shell size
28-16M and 28-22M
standard sex
Compatible with MIL
Spec metal housing type
connectors
Choice of application
tooling to meet all
production requirements
AMP Metal-Shell Circular
Plastic Connectors offer
the reliability of higher
priced all metal connectors
at a fraction of the cost, and
are offered in the more
popular contact
configurations.
Metal-Shell
Circular Plastic Connectors
Connector housings are
made of lightweight, sturdy,
thermoplastic material that
are UL 94V-0 rated, with
zinc alloy, nickel plated
shells for added strength
and protection. These
connectors are available
in a variety of configurations
to meet your signal, low
current and high current
requirements. Operating
temperatures range from
-55°C to +125°C [-67˚F to
+257˚F].
Signal and low current is
provided by a choice of
AMP Multimate contacts:
.062 [1.57] pin diameter
and 20 DF and 20 DM
contacts, .040 [1.02] pin
diameter. High current
requirements are met by
the Type XII capable of
carrying up to 35 amperes
of current.
These quick connect/
disconnect circular
connectors feature
polarized housings to
prevent mismating with
other insert arrangements.
For additional economy,
industry accepted AMP
Type III+ pin and socket
contacts are available on
reels in strip-form for high
volume, low cost, automatic
machine terminations. For
low volume, prototype or
maintenance and repair
Type III+ contacts are also
available in loose piece
form.
AMP Metal-Shell Circular
Plastic Connectors are
available in square flange
receptacles and freehanging plug connectors.
60
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Metal-Shell Circular Plastic Connectors, Series 1
Metal-Shell CPC
Connectors, Series 1,
Standard Sex
Square Flange Receptacles
(Accepts Multimate Pins)
F
Mating Face
E
D
Listed part numbers are for
connectors only; contacts must
be ordered separately.
.975±.010
[24.77±0.03]
2 Plc.
Plugs
(Accepts Multimate Sockets)
Material and Finish
Related Product Data
L
M
K
Arrangement
Square Flange
Receptacle
14-5
14-7
22-16
28-24
28-37
208719-1
208715-1
208489-1
208459-1
208471-1
Plug Part No.
without TETRASEALS Ring
with TETRASEALS Ring
208718-1
208718-2
208714-1
208714-2
208488-1
208488-3
208457-1
208457-3
208470-1
208470-3
Note: Maximum wire insulation diameter is .100 [2.54], except arrangements 14-5 and 28-24 are .150 [3.81] max.
J
Dia.
G
Dia.
Metal-Shell CPC
Series 1
Contacts—Pages 17-21
Contact Arrangement—Page 61
Component Dimensions—Page 70
Accessories—Page 71
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
A
Mating Face
Square Flange Receptacle—
Housing—Thermoplastic, UL 94V-0
rated, black
Metal-Shell—Zinc alloy, plated nickel
Grooved Pin—Steel alloy, plated nickel
Plug—
Housing—Thermoplastic, UL 94V-0
rated, black
Metal-Shell—Zinc alloy, plated nickel
Tetraseal Seal—Fluorocarbon
Retainer Ring—Stainless steel
Coupling Ring—Zinc alloy, plated
nickel
B
E
E
H
Dia.
J
Dia.
TETRASEALS Ring
(Installed in plugs only.)
Rear Mount Panel Cutout
The TETRASEALS Ring provides splashproof sealing between mating metal
shells. It is located behind the plug shell
external keys (under the coupling ring).
When mated with a receptacle, the ring
is compressed against the inside
diameter of the mating end edge of the
receptacle shell.
Front Mount Panel Cutout
TETRASEALS
Ring
61
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Metal-Shell Circular Plastic Connectors, Series 1 (Continued)
Metal-Shell CPC
Connectors, Series 1,
Reverse Sex
Square Flange Receptacles
(Accepts Multimate Sockets)
F
Mating Face
E
D
B
Listed part numbers are for
connectors only; contacts must
be ordered separately.
A
Plugs
(Accepts Multimate Pins)
Mating Face
Material and Finish
Square Flange Receptacle—
Housing—Thermoplastic, UL 94V-0
rated, black
Metal-Shell—Zinc alloy, plated nickel
Grooved Pin—Steel alloy, plated nickel
L
M
Plug—
Housing—Thermoplastic, UL 94V-0
rated, black
Metal-Shell—Zinc alloy, plated nickel
Tetraseal Seal—Fluorocarbon
Retainer Ring—Retainer Ring
Coupling Ring—Zinc alloy, plated
nickel
K
Arrangement
Square Flange
Receptacle
14-5
14-7
22-14
28-37
208721-1
208717-1
208487-1
208473-1
Note: Maximum wire insulation diameter is .100 [2.54], except arrangements 14-5 and 28-24 are .150 [3.81] max.
Related Product Data
Contacts—Pages 17-21
Contact Arrangement—Page 61
Component Dimensions—Page 70
Accessories—Page 71
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
Metal-Shell CPC
Series 1
Plug Part No.
without TETRASEALS Ring
with TETRASEALS Ring
208720-1
—
208716-1
208716-2
208486-1
208486-3
208472-1
208472-3
J
Dia.
J
Dia.
E
E
H
Dia.
Rear Mount Panel Cutout
G
Dia.
Front Mount Panel Cutout
TETRASEALS Ring
(Installed in plugs only.)
The TETRASEALS Ring provides splashproof sealing between mating metal
shells. It is located behind the plug shell
external keys (under the coupling ring).
When mated with a receptacle, the ring
is compressed against the inside
diameter of the mating end edge of the
receptacle shell.
TETRASEALS
Ring
62
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Metal-Shell CPC Connectors, Series 1, Contact Arrangements
Shell Size 14
.170
.170
[4.32] .000
[4.32]
.094
.094
[2.39]
[2.39]
.172
.172
[4.37] .000
[4.37]
.086
.086
[2.18]
[2.18]
.130
[3.3]
.126
[3.2]
.047
[1.19]
.000
.000
.126
[3.2]
.130
[3.3]
Arrangement 14-5
Max. Wire Ins. Dia. = .150 [3.81]
Arrangement 14-7
Max. Wire Ins. Dia. = .100 [2.54]
Shell Size 22
.000
.193 .043 .032 .182
[4.9] [1.09] [0.81] [4.62]
.150
.150
[3.81] .000 [3.81]
.225
.075 .075
[5.72] [1.90] [1.90]
.225
[5.72]
.268
[6.81]
.118
[3]
.107 .257
[2.72] [6.53]
.260 [6.6]
.205 [5.21]
.130 [3.3]
.075 [1.91]
.000
.000
.075 [1.91]
.130 [3.3]
.205 [5.21]
.260 [6.6]
.150
[3.81]
Note: Contact arrangements
shown are of pin mating face (plug
or receptacle). Socket mating face
is mirror image.
Arrangement 22-14
Max. Wire Ins. Dia. = .100 [2.54]
Shell Size 28
.150 [3.81]
Arrangement 22-16
Max. Wire Ins. Dia. = .100 [2.54]
.375
.225 .075 .075
.225 .375
[9.52] [5.72] [1.90] [1.90] [5.72] [9.52]
.364
[9.25]
.455
[11.56]
.182
[4.62]
.273
[6.93]
.000
.091
[2.31]
.182
[4.62]
.091
[2.31]
.364
[9.25]
.273
[6.93]
.455
[11.56]
.450
[11.43]
.300
.150
[7.62] [3.81] .000
.150 .300
.450
[3.81] [7.62] [11.43]
.316 [8.03]
.260 [6.6]
.158 [4.01]
.130 [3.3]
.000
.000
.130 [3.3]
.158 [4.01]
.260 [6.6]
.316 [8.03]
.390 [9.91]
.150 [3.81]
Arrangement 28-24
Max. Wire Ins. Dia. = .150 [3.81]
Arrangement 28-37
Max. Wire Ins. Dia. = .100 [2.54]
63
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Metal-Shell CPC
Series 1
.390 [9.91]
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Metal-Shell Circular Plastic Connectors, Series 2
Metal-Shell CPC
Connectors, Series 2,
Standard Sex
Square Flange Receptacles
(Accepts 20 DF and 20 DM Pins)
F
A
E
B
D
Listed part numbers are for
connectors only; contacts must
be ordered separately.
Material and Finish
Square Flange Receptacle—
Housing and Retention Insert—
Thermoplastic, UL 94V-0 rated, black
Metal-Shell—Zinc alloy, plated nickel
Grooved Pin—Steel alloy, plated nickel
Plugs
(Accepts 20 DF and 20 DM Sockets)
Mating Face
Plug—
Housing—Thermoplastic, UL 94V-0
rated, black
Metal-Shell—Zinc alloy, plated nickel
Tetraseal Seal—Fluorocarbon
Retainer Ring—Stainless steel
Coupling Ring—Zinc alloy, plated
nickel
L
M
K
Related Product Data
Metal-Shell CPC
Series 2
Contacts—Pages 29-30
Contact Arrangement—Page 64
Component Dimensions—Page 70
Accessories—Pages 38, 39 and 71
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
Part No.
Arrangement
Square Flange
Receptacle
Plug
without Tetraseals Ring
22-28
28-63
208491-1
208477-1
208490-1
208476-1
J
Dia.
G
Dia.
E
Recommended Panel Cutout
64
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Metal-Shell Circular Plastic Connectors, Series 2 (Continued)
Metal-Shell CPC
Connectors, Series 2,
Reverse Sex
Square Flange Receptacles
(Accepts 20 DF and 20 DM Sockets)
A
Mating Face
E
F
D
Listed part numbers are for
connectors only; contacts must
be ordered separately.
Material and Finish
Square Flange Receptacle—
Housing and Retention Insert—
Thermoplastic, UL 94V-0 rated, black
Metal-Shell—Zinc alloy, plated nickel
Grooved Pin—Steel alloy, plated nickel
B
Plugs
(Accepts 20 DF and 20 DM Pins)
Mating Face
Plug—
Housing—Thermoplastic, UL 94V-0
rated, black
Metal-Shell—Zinc alloy, plated nickel
Tetraseal Seal—Fluorocarbon
Retainer Ring—Stainless steel
Coupling Ring—Zinc alloy, plated
nickel
L
M
K
Related Product Data
Contacts—Pages 29-30
Contact Arrangement—Page 64
Component Dimensions—Page 70
Accessories—Pages 38, 39 and 71
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
Part No.
Arrangement
Plug
without Tetraseals Ring
208493-1
208475-1
208492-1
208474-1
J
Dia.
Metal-Shell CPC
Series 2
22-28
28-57
Square Flange
Receptacle
G
Dia.
E
E
J
Dia.
G
Dia.
Rear Mount Panel Cutout
Front Mount Panel Cutout
65
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Metal-Shell CPC Connectors, Series 2, Contact Arrangements
Shell Size 22
.248 .124 .000 .124 .248
[6.3] [3.15]
[3.15] [6.3]
.310 .186 .062 .062 .186 .310
[7.87] [4.72] [1.57] [1.57] [4.72] [7.87]
.294 [7.47]
.170 [4.32]
.062 [1.57]
.000
.062 [1.57]
.170 [4.32]
.124
[3.15]
.294 [7.47]
Arrangement 22-28
Max. Wire Ins. Dia. = .068 [1.73]
Shell Size 28
.434 .310 .186 .062 .062 .186 .310 .434
[11.02] [7.87] [4.72] [1.57] [1.57] [4.72] [7.87] [11.02]
.496 .372 .248 .124
.124 .248 .372 .496
[12.6] [9.45] [6.3] [3.15] .000 [3.15] [6.3] [9.45] [12.6]
.372 .248 .124
.124 .248 .372
[9.45] [6.3] [3.15] .000 [3.15] [6.3] [9.45]
.434 .310 .186 .062 .062 .186 .310 .434
[11.02] [7.87] [4.72] [1.57] [1.57] [4.72] [7.87] [11.02]
.448 [11.38]
.340 [8.64]
.443 [11.25]
.232 [5.89]
.319 [8.1]
.108 [2.74]
.212 [5.38]
.000
Metal-Shell CPC
Series 2
.105 [2.67]
.000
.019 [0.48]
.108 [2.74]
.143 [3.63]
.232 [5.89]
.250 [6.35]
.340 [8.64]
.357 [9.07]
.448 [11.38]
.464 [11.79]
.124 [3.15]
.124
[3.15]
Arrangement 28-57
Max. Wire Ins. Dia. = .068 [1.73]
Arrangement 28-63
Max. Wire Ins. Dia. = .068 [1.73]
Note: Contact arrangements
shown are of pin mating face (plug
or receptacle). Socket mating face
is mirror image.
66
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Metal-Shell Circular Plastic Connectors, Series 3
Square Flange Receptacles
(Accepts Type XII Male Pins)
Metal-Shell CPC
Connectors, Series 3,
Standard Sex
F
A
E
B
D
Listed part numbers are for
connectors only; contacts must
be ordered separately.
Plugs
(Accepts Type XII Female Sockets)
Material and Finish
Square Flange Receptacle—
Housing—Thermoplastic, UL 94V-0
rated, black
Metal-Shell—Zinc alloy, plated nickel
Peripheral Seal—Elastomer, grey
Grooved Pin—Stainless steel
Plug—
Housing—Thermoplastic, UL 94V-0
rated, black
Metal-Shell—Zinc alloy, plated nickel
Tetraseal Seal—Fluorocarbon
Retainer Rings—Stainless Steel
Coupling Ring—Zinc alloy, plated
nickel
Related Product Data
Mating Face
L
M
K
Arrangement
Square Flange
Receptacle
22-3
28-7
208495-1
208483-1
J
Dia.
G
Dia.
E
Metal-Shell CPC
Series 3
Contacts—Page 34-35
Contact Arrangement—Page 67
Component Dimensions—Page 70
Accessories—Pages 38, 39 and 71
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
Plug Part No.
without TETRASEALS Ring
with TETRASEALS Ring
208494-1
208494-3
208482-1
—
Recommended Panel Cutout
TETRASEALS
Ring
TETRASEALS Ring
(Installed in Plugs only)
The TETRASEALS Ring provides splashproof sealing between connector metalshells. It is located behind the plug-shell
external keys (under the coupling ring).
When mated with a receptacle, the ring is
compressed against the inside diameter
of the mating end edge of the receptacle
shell.
67
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Metal-Shell Circular Plastic Connectors, Series 3 (Continued)
Metal-Shell CPC
Connectors, Series 3,
Reverse Sex
Square Flange Receptacles
(Accepts Type XII Female Sockets)
F
A
E
B
D
Listed part numbers are for
connectors only; contacts must
be ordered separately.
Plugs
(Accepts Type XII Male Pins)
Material and Finish
Square Flange Receptacle—
Housing—Thermoplastic, UL 94V-0
rated, black
Metal-Shell—Zinc alloy, plated nickel
Peripheral Seal—Elastomer, grey
Grooved Pin—Stainless steel
Mating Face
L
Plug—
Housing—Thermoplastic, UL 94V-0
rated, black
Metal-Shell—Zinc alloy, plated nickel
Tetraseal Seal—Fluorocarbon
Retainer Rings—Stainless Steel
Coupling Ring—Zinc alloy, plated
nickel
Related Product Data
Metal-Shell CPC
Series 3
Contacts—Page 34-35
Contact Arrangement—Page 67
Component Dimensions—Page 70
Accessories—Pages 38, 39 and 71
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
M
K
Arrangement
Square Flange
Receptacle
22-3
28-7
208497-1
208485-1
Plug Part No.
without TETRASEALS Ring
with TETRASEALS Ring
208496-1
—
208484-1
208484-3
J
Dia.
G
Dia.
E
Recommended Panel Cutout
TETRASEALS Ring
TETRASEALS
Ring
(Installed in Plugs only)
The TETRASEALS Ring provides splashproof sealing between connector metalshells. It is located behind the plug-shell
external keys (under the coupling ring).
When mated with a receptacle, the ring is
compressed against the inside diameter
of the mating end edge of the receptacle
shell.
68
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Metal-Shell CPC Connectors, Series 3, Contact Arrangements
Shell Size 22
.148
[3.76] .000
.148
[3.76]
.107 [2.72]
.000
.213 [5.41]
Arrangement 22-3
Max. Wire Ins. Dia. = .220 [5.59]
Shell Size 28
.343
[8.71]
.172 .000
[4.37]
.172 .343
[4.37] [8.71]
.296 [7.52]
.000
Metal-Shell CPC
Series 3
.296 [7.52]
Arrangement 28-7
Max. Wire Ins. Dia. = .220 [5.59]
Note: Contact arrangements
shown are of pin mating face (plug
or receptacle). Socket mating face
is mirror image.
69
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Metal-Shell Circular Plastic Connectors, Series 4
Metal-Shell CPC
Connectors, Series 4
Square Flange Receptacles
(Standard Sex Receptacles accept Type XII Male and Multimate Pins. Reverse Sex Receptacles accept Type XII
Female and Multimate Sockets.)
F
A
E
B
D
Listed part numbers are for
connectors only; contacts must
be ordered separately.
Material and Finish
Plugs
(Standard Sex Plugs accept Type XII Female and Multimate Sockets. Reverse Sex Plugs accept Type XII Male and
Multimate Pins.)
Mating Face
Square Flange Receptacle—
Housing—Thermoplastic, UL 94V-0
rated, black
Metal-Shell—Zinc alloy, plated nickel
Grooved Pin—Stainless steel
Plug—
Housing—Thermoplastic, UL 94V-0
rated, black
Metal-Shell—Zinc alloy, plated nickel
Tetraseal Seal—Fluorocarbon
Retainer Rings—Stainless Steel
Coupling Ring—Zinc alloy, plated
nickel
Related Product Data
L
M
K
Arrangement
Metal-Shell CPC
Series 4
Contacts—Pages 17-23 and 34-35
Contact Arrangement—Page 69
Component Dimensions—Page 70
Accessories—Pages 38, 39 and 71
Performance Characteristics—
Page 6
Application Tooling—Pages 76-79
Technical Documents—Page 80
28-16M
28-22M
G
Dia.
Square Flange
Receptacle
Standard Sex
Reverse Sex
208479-1
1776088-1
208481-1
—
Plug Part No.
without TETRASEALS Ring
with TETRASEALS Ring
Standard Sex
Reverse Sex
Standard Sex
208478-1
1776089-1
208478-3
208480-1
—
208480-3
J
Dia.
G
Dia.
E
E
J
Dia.
Rear Mount Panel Cutout
Front Mount Panel Cutout
TETRASEALS
Ring
TETRASEALS Ring
(Installed in Plugs only)
The TETRASEALS Ring provides splashproof sealing between connector metalshells. It is located behind the plug-shell
external keys (under the coupling ring).
When mated with a receptacle, the ring is
compressed against the inside diameter
of the mating end edge of the receptacle
shell.
70
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Metal-Shell CPC Connectors, Series 4, Contact Arrangements
Shell Size 28
.276 .092 .092 .276
[7.01][2.34][2.34][7.01]
.400 .184
.184 .400
[10.16][4.67].000 [4.67] [10.16]
.400 [10.16]
.316 [8.03]
.158 [4.01]
.000
.158 [4.01]
.316 [8.03]
.400 [10.16]
Arrangement 28-16M
Max. Wire Ins. Dia. =
.150 [3.81] for Multimate Contacts,
.220 [5.59] for Power Contacts
.364 .182
.182 .364
[9.25][4.62].000 [4.62][9.25]
.455 .273 .091 .091 .273 .455
[11.56][6.93][2.31][2.31][6.93][11.56]
.382 [9.7]
.316 [8.03]
.158 [4.01]
.000
.158 [4.01]
.316 [8.03]
Metal-Shell CPC
Series 4
.382 [9.7]
Arrangement 28-22M
Max. Wire Ins. Dia. =
.150 [3.81] for Multimate Contacts,
.220 [5.59] for Power Contacts
Note: Contact arrangements
shown are of pin mating face (plug
or receptacle). Socket mating face
is mirror image.
71
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Metal-Shell CPC Connectors Component Dimensions
Square Flange Receptacles
Thread-Size:
7/8-20 UNEF-2A
(Shell Size 14)
15/16-20 UNEF-2A
(Shell Size 22)
1-3/8-18 UNEF-2A
(Shell Size 28)
F ±.015
[±0.38]
E ±.005
[±0.13]
J ±.005
[±0.13]
Dia.
E ±.005
[±0.13]
G ±.010
[±0.25]
Dia.
Panel Cutout, Front Mounted
Receptacle
D Max.
J ±.005
[±0.13]
Dia.
E ±.005
[±0.13]
H Dia.
Front and Rear
Panel Thk.
.125
[3.18] Max.
B
C ±.010
[±0.25]
±.010
[±0.25]
Panel Cutout, Rear Mounted
Receptacle
A Max.
Plugs
K Max.
M ±.010
[±0.25]
Thread-Size:
7/8-20 UNEF-2A
(Shell Size 14)
1-3/16-18 UNEF-2A
(Shell Size 22)
1-7/16-18 UNEF-2A
(Shell Size 28)
L ±.015
[±0.38]
For drawings, technical data or
samples, contact your sales
engineer or call Technical Support.
Series
A
B
C
D
E
F
Dimensions
G
H
J
K
L
M
1.415
35.94
.745
18.92
.100
2.54
1.031
26.19
.906
23.01
1.185
30.1
1.070
27.18
1.070
27.18
.125
3.18
1.400
35.56
1.225
31.12
.380
9.65
1.415
35.94
.745
18.92
.100
2.54
1.031
26.19
.906
23.01
1.185
30.1
1.070
27.18
1.070
27.18
.125
3.18
1.400
35.56
1.225
31.12
.380
9.65
.790
20.07
.790
20.07
.875
22.23
.103
2.62
.103
2.62
.125
3.18
1.503
38.18
1.503
38.18
1.900
48.26
1.250
31.75
1.250
31.75
1.562
39.67
1.534
38.96
1.534
38.96
1.950
49.53
1.156
29.36
1.156
29.36
1.610
40.89
1.554
39.47
1.554
39.47
1.970
50.04
.120
3.05
.120
3.05
.145
3.68
.380
9.65
.380
9.65
.380
9.65
.875
22.23
.125
3.18
1.900
48.26
1.562
39.67
1.950
49.53
1.610
40.89
1.970
50.04
.145
3.68
1.560
39.62
1.265
32.13
1.560
39.62
1.560
39.62
1.840
46.74
1.750
44.45
1.750
44.45
2.170
55.12
Rev.
1.190
30.22
1.470
37.34
1.555
39.5
1.540
39.12
1.260
31.00
2.170
55.12
.380
9.65
22-28
Std.
Rev.
.934
23.72
.790
20.07
.103
2.62
1.503
38.18
1.250
31.75
1.534
38.96
1.156
29.36
1.554
39.47
.120
3.05
1.295
32.89
1.750
44.45
.380
9.65
28-57
Rev.
1.229
31.22
1.229
31.22
.875
22.22
.875
22.22
.125
3.18
.125
3.18
1.900
48.26
1.900
48.26
1.562
39.67
1.562
39.67
1.950
49.53
1.950
49.53
1.610
40.89
1.610
40.89
1.970
50.04
1.970
50.04
.145
3.68
.145
3.68
1.408
35.76
1.408
35.76
2.170
55.12
2.170
55.12
.380
9.65
.380
9.65
1.755
44.58
.790
20.07
.103
2.62
1.503
38.18
1.250
31.75
1.534
38.96
1.156
29.36
1.554
39.47
.120
3.05
1.805
45.85
1.750
44.45
.380
9.65
1.825
46.36
.875
22.22
.125
3.18
1.900
48.26
1.562
39.67
1.950
49.53
1.610
40.89
1.970
50.04
.145
3.68
2.125
53.98
2.170
55.12
.380
9.65
1.825
46.36
1.825
46.36
1.825
46.36
.875
22.22
.875
22.22
.875
22.22
.125
3.18
.125
3.18
.125
3.18
1.900
48.26
1.900
48.26
1.900
48.26
1.562
39.67
1.562
39.67
1.562
39.67
1.950
49.53
1.950
49.53
1.950
49.53
1.610
40.89
1.610
40.89
1.610
40.89
1.970
50.04
1.970
50.04
1.970
50.04
.145
3.68
.145
3.68
.145
3.68
2.125
53.98
2.125
53.98
2.125
53.98
2.170
55.12
2.170
55.12
2.170
55.12
.380
9.65
.380
9.65
.380
9.65
Arrangement
No.
14-5
14-7
Sex
Std.
Rev.
Std.
Rev.
22-14
Rev.
22-16
Std.
28-24
Std.
Metal-Shell CPC
Component Dimensions
1
Std.
28-37
2
28-63
22-3
3
28-7
4
Std.
Std.
Rev.
Std.
Rev.
28-13M
Std.
28-16M
Std.
28-22M
Std.
72
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Metal-Shell CPC Connector Accessories
Internal
Threads
Cable Clamps
Material and Finish
A
Body and Clamp Halves—Zinc alloy,
nickel plated
Screws and Washers—Stainless
steel
Screw with
Lock Washer
(Two Supplied)
±.031
[±0.79]
Clamp Half
(Two Supplied)
Cable
Clamp
Body
B ±.031
[±0.79]
C ±.031
[±0.79]
Plug (Shown for
reference only)
Cable Dia.
Range
Shell
Size
14
22
28
A
.938
23.83
.938
23.83
1.031
26.19
Dimensions
B
1.175
29.85
1.432
36.37
1.593
40.46
Cable
O.D. Range
C
1.165
29.59
1.469
37.31
1.688
42.88
.225-.562
5.71-14.27
.325-.750
8.26-19.05
.450-.938
11.43-23.83
Thread Size
Part No.
7/8-20 UNEF-3B
208945-5
1-3/16-18 UNEF-3B
208945-7
1-7/16-18 UNEF-3B
208945-8
Notes: 1. For Shell Size 22 Receptacle use plastic cable clamp Size 17 (See page 38), for Shell Size 28 Receptacle use plastic cable
clamp Size 23 (See pages 38-39). Use Size 14 metal cable clamp for both plug and receptacle Size 14 connectors.
2. Metal cable clamps (Sizes 22 and 28) are for use with Metal-Shell CPC plugs ONLY.
Cable Entry Seals
Heat Shrinkable Sealing Boots
Cable entry seals are used with
jacketed cable to provide an
environmentally sealed wire-toconnector system. They can be used
with plugs.
Thick Wall Boots
Material
Internal Sleeve—Nylon
Outer Tubing—Polyolefin, black
Shell
Size
Dimensions
A
B
22
3.000
76.20
28
Expanded
Wall Thickness
1.250
31.75
.070
1.78
Sealing Range
(Dia.)
.550 - 1.250
13.97 - 31.75
Max. Recovered
Inside Dia.
.500
12.70
Part No.
54012-3
54012-4
Metal-Shell CPC
Accessories
B ±.010
[±0.25]
Protective Cap Assemblies
(for Metal-Shell CPC
Receptacles Only)
Shell
Size
14
22
Material and Finish
Zinc alloy, nickel plated
28
Dimensions
A
B
1.225
.515
31.11 13.08
1.750
.635
44.45 16.13
2.170
.635
55.12 16.13
Part
No.
213823-2
A ±.010
[±0.25]
211903-1
3.000±.010
[76.2±0.25]
211904-1
Bead
Chain
73
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Engineering Notes
74
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Miniature Circular Plastic Connectors (CPC)
Product Facts
■
■
■
■
■
■
■
■
Two shell sizes: Size 8 (1-4)
or Size 11 (5-9) contact
positions
Pre-positioned 1/4 turn
coupling ring with positive
lock and alignment feature
Unique contact pattern for
each position size helps
prevent accidental mating
with other position sizes
Sealed to IP67 (Protected
against immersion in water
up to 1 meter for 1/2 hour)
Front or rear jam nut panel
mounting
No assembly required
Receptacle available in
free-hanging or panel mount
versions
Alternate keys available
AMP Miniature Circular
Plastic Connectors (CPC)
are available in wire-towire and wire-to-panel
configurations.
Utilizes existing MiniUniversal MATE-N-LOK
stamped and formed contacts designed for up to
500 mating cycles when
plated with gold or up to 50
cycles with tin plating.
■
Wide variety of custom
discrete type cable
assemblies, terminated
with Terminals and
Splices, Soft Shell,
and Circular Plastic
Connectors and other
crimp and massterminated products.
Ideal for Industrial,
Instrumentation and
Transportation applications
where size, contact density
and environmental exposure are primary concerns.
■
■
Capability to produce
custom overmolded
assemblies and insert
and injection molding.
Jacketed cable
assemblies and discrete
wire: Subminiature-D,
SCSI, Circular Plastic,
VHDCI, USB and
Shielded Data Link
Technical Documents
Product Specification
108-2079 Miniature CPC Connectors
Material and Finish
Seal, Wire Entry—Elastomer, yellow
or white
Seal, Peripheral—Elastomer, gray
Housing—Thermoplastic, black or red
Protector, Seal—Thermoplastic,
natural
Ring, Coupling—Thermoplastic,
black
Nut, Jam—Brass, nickel plated
Plate, Seal Retention—
Thermoplastic, black
■
Miniature CPC
Connectors
Cable Assemblies
Nylon housings offer good
resistance to a wide range
of chemical agents while
the IP67 sealing helps
prevent ingress of dirt or
fluids that could have an
adverse effect on the
contact interface.
For more information on
our cable assembly
capabilities, see our
website at
www.tycoelectronics.com/
cables
75
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Miniature Circular Plastic Connectors (CPC) (Continued)
Shell Size 8
(4 Position shown)
Receptacle Assembly,
Panel Mount
(Order pin contacts separately
— see page 75)
1.142
[29.00]
1.142
[29.0]
.125
[3.18]
.827
[21.00]
.555
[14.10]
.125
[3.18] Max.
Panel
Thickness
Alignment
Indicator
1/2-20 UNF-2A
White Alignment Dot
5/8-24
UNEF-2A
Jam Nut
Thread
& Flange Seal
.555
[14.1]
Receptacle Assembly,
Free-Hanging
(Order pin contacts separately
— see page 75)
.606
[15.39]
.394
[10.0]
.551
[14.00]
.413
[10.48]
shown for
reference only.
Must be ordered Must be ordered
separately.
separately.
.059
[1.5]
.551
[14.00]
1.142±.010
[29.00±0.25]
1/2-20 UNF-2A
Thread
1/2-20 UNF-2A
Thread
White
Alignment
Dot
White
Aignment
Dots
1.14
[29.00]
Alignment
Indicator Slots
.669 [17.00]
.413
[10.48]
Miniature CPC
Connectors
Plug Assembly
(Order socket contacts
separately — see page 75)
.06
[1.50]
.55
[14.10]
1.142
[29.0]
Positive
Lock
Indicator
1/2-20 UNF-2A
Jam Nut shown for
reference only.
Must be ordered
separately.
5/8-24
Flange
Seal shown for
UNEF-2A
reference
only.
Thread
Positive
Lock
Indicator
1.142±.010
[29.00±0.25]
White
Aignment
Dots
Alignment
Indicator Slots
.669 [17.00]
Related Product Data
Part Numbers—Page 74
Contacts—Page 75
Accessories—Page 75
76
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Miniature Circular Plastic Connectors (CPC) (Continued)
Shell Size 11
(9 Position shown)
Plug Assembly
(Order socket contacts
separately — see page 75)
Receptacle Assembly,
Panel-Mount
(Order pin contacts separately
— see page 75)
.689
[17.50]
1.14 ± .010
[29.00 ± 0.25]
Jam Nut & Flange
Seal shown for reference
only. Must be ordered
separately.
.413
[10.48]
Z
White
Alignment
Dots
K REF
SEE TABLE
.059
[1.50]
.555
[14.10]
Ø21.75
Z
Positive
Lock
Indicator
Alignment
Indicator
Slots
3/4-20
UNEF-2A
Thread
1.14
[29.00]
.866 [22.00]
Receptacle Assembly, Free-Hanging
(Order pin contacts separately — see page 75)
.555
[14.10]
.059 [1.50]
.689
[17.50]
3/4-20
UNEF-2A
Thread
Positive Lock
Indicator
.902
[22.90]
1.14
[29.00]
Housing Part Numbers
8
1
8
2
8
3
8
4
11
5
11
6
11
7
11
8
11
9
Insulation
Diameter Range
.035-.059 [.89-1.5]*
.059-.110 [1.5-2.39]
.035-.059 [.89-1.5]*
.059-.110 [1.5-2.39]
.035-.059 [.89-1.5]*
.059-.110 [1.5-2.39]
.035-.059 [.89-1.5]*
.059-.110 [1.5-2.39]
.035-.059 [.89-1.5]*
.059-.110 [1.5-2.39]
.035-.059 [.89-1.5]*
.059-.110 [1.5-2.39]
.035-.059 [.89-1.5]*
.059-.110 [1.5-2.39]
.035-.059 [.89-1.5]*
.059-.110 [1.5-2.39]
.035-.059 [.89-1.5]*
.059-.110 [1.5-2.39]
Panel Mount
Receptacle
Housing Part Numbers
Free-Hanging
Receptacle
1445539-1
1445539-3
1445538-1
1445538-3
1445537-1
1445537-3
1445421-1
1445421-3
1445824-1
1445824-3
1445823-1
1445823-3
1445822-1
1445822-3
1445821-1
1445821-3
1445816-1
1445816-3
1445526-1
1445526-3
1445522-1
1445522-3
1445510-1
1445510-3
1445389-1
1445389-3
1445829-1
1445829-3
1445828-1
1445828-3
1445827-1
1445827-3
1445826-1
1445826-3
1445825-1
1445825-3
Plug
1445536-1
1445536-3
1445535-1
1445535-3
1445534-1
1445534-3
1445390-1
1445390-3
1445820-1
1445820-3
1445819-1
1445819-3
1445818-1
1445818-3
1445817-1
1445817-3
1445807-1
1445807-3
Miniature CPC
Connectors
Standard stocked Part
Numbers in BOLD type.
Arrangement
Shell No. of
Size
Pos.
Note: Alternate keys available (115˚ part numbers shown in above chart)
*Insertion Tip (Seal Protector) Part No. 1604816-1 recommended for use when inserting socket contacts within this insulation range.
77
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Miniature Circular Plastic Connectors (CPC) (Continued)
Contacts and Application
Tooling
Pin (for Receptacles)
Contact Part Numbers
Wire Size
Range
AWG [mm2]
Ins. Dia.
Range
30-26
[.05-.12]
.035-.050
.889-1.27
26-22
[.12-.3]
.047-.069
1.19-1.75
22-18
[.3-.8]
or
22 x (2)
[.3]
.059-.094
1.50-2.39
or
.067 x (2)
3.38
.671 [17.04]
Socket (for Plugs)
.659 [16.74]
Contact Extraction Tool
Part No. 189727-1
Instruction Sheet 408-4118
Contact Insertion Tool
Part No. 455830-1
Instruction Sheet 408-7984
(For inserting contacts applied to small diameter
wire)
Insertion Tip (Seal Protector)
Part No. 1604816-1
(For inserting socket contacts applied to small
diameter wire)
Pin
Material
and Finish
Strip
Form
Brass, Pre-tin
770835-1
Phos. Brz., Pre-tin
—
Brass, Duplex1 1-770835-0
Phos. Brz., Duplex1
—
Brass, Pre-tin
770901-1
Phos. Brz., Pre-tin
—
Brass, Duplex1 1-770901-0
Phos. Brz., Duplex1
—
Brass, Pre-tin
770903-1
Phos. Brz., Pre-tin
—
Brass, Duplex1 1-770903-0
Phos. Brz., Duplex1
—
Loose
Piece
794059-1
—
1-794059-0
—
770985-1
—
1-770985-0
—
770987-1
—
1-770987-0
—
Socket
Strip
Loose
Form
Piece
770834-1
794058-1
770834-4
—
1-770834-0
1-794058-0
1-770834-1
—
770902-1
770986-1
770902-4
—
1-770902-0
1-770986-0
1-770902-1
—
770904-1
770988-1
770904-4
—
1-770904-0
1-770988-0
1-770904-1
—
HDM
Applicator
Part No.
Hand
Tool
Part No.
567418-12
567418-22
567418-32
90717-2
567066-33
567066-43
567066-53
91529-1
567067-12
567067-22
567067-32
91522-1
1Duplex
Finish – Plated with .000030 [.000762] min. gold in mating area and .000100 [.00254] min. tin in crimping area
over .000050 [.00127] min. nickel underplate on entire contact.
Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used
on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-LECTRIC Model G Machine. See page 133 for further
information.
3HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -4 is used
on AMP-O-LECTRIC Model K Machine, -5 is used on AMP-O-LECTRIC Model G Machine. See page 133 for further
information.
Note: All part numbers are RoHS Compliant.
2HDM
Accessories (All accessories must be ordered separately.)
Strain Reliefs
Dimensions
Shell
Size
A
B
8
.925 [23.5] .709 [18.0]
11
1
1.10 [28.0]
Open Style
.964 [24.5]
2
Part Number
Straight
Right-Angle
1445730-1
1445771-1
1546746-31
1445856-1
1546746-42
B
A
With Cover
Miniature CPC
Connectors
A
Heat Shrink Boots
Shell
Size
8
11
Dimensions
A
B
2.00 [50.8]
.75 [19.0]
2.50 [63.5]
1.00 [25.4]
Flange Seals
Shell
Size
8
11
Dimensions
A
B
.60 [15.3]
.26 [6.6]
.73 [18.5]
.33 [8.5]
Jam Nuts
Shell
Size
8
11
Dimensions
A
B
.75 [19.0]
.125 [3.2]
.875 [22.25] .125 [3.2]
B
Part
Number
1546997-1
1546921-1
Sealant Length
Part
Number
1445420-1
1445420-2
Thread
5/8-24 UNEF-2B
3/4-20 UNEF-2B
B
see chart
for Threads
Part
Number
1604196-1
1445904-1
A
.146
[3.70]
Dust Caps
Shell
Size
8
11
Dimensions
Part
Number
A
B
.795 [20.2] .551 [14.0] 1604089-1
.89 [22.6] .736 [18.7] 1604089-2
∅ A ±.025
[±0.64]
1.49±.010
[37.9±0.25]
∅ B ±.025
[±0.64]
.094
[2.4]
78
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Application Tooling
Mechanical Hand Tools for
Interchangeable Die Sets
SDE (Standard Die
Envelope) Die Sets
SDE die sets provide costeffective flexibility, through
many options for a common
die-set outline. The SDE die
sets can be adapted for use
with CERTI-CRIMP hand
tools, PRO-CRIMPER III
hand tools, the SDE
Terminator and the 626
Pneumatic Tool System.
For more information, request Catalog
1654003.
PRO-CRIMPER III Hand
Tool, Part No. 58495-1
Commercial grade hand
tool for crimping various
products. Features ratchet
control to provide complete
crimp cycle. Accepts both
pinned- and shoulderedstyle die sets. Locators are
provided with pinned-style
die sets for proper contact
and wire positioning, and to
help minimize contact
rotation and bending during
crimping. Approximate
weight 1.3 lb [0.60 kg].
Premium grade hand tools.
Feature ratchet control to
provide complete crimp
cycle. Die sets close in a
straight line. Include a contact locator and wire stop,
plus an insulation crimp
adjustment lever, when
applicable. Approximate
weight 1.3 lb [0.59 kg]
Premium grade hand tool.
Features ratchet control to
provide complete crimp
cycle. The interchangeable
die sets close in a straight
line to minimize contact or
terminal rotation during
crimping. When applicable,
user-assist features such as
a contact or terminal locator
and a wire stop, are built
into the die set. Approximate
weight 1.9 lb [0.86 kg].
An electric crimp terminator
with compact design
features a die set holder
that is compatible with all
AMP SDE (PRO-CRIMPER III
Tool) die sets. Hand- or
foot-actuated options are
available. CE Approved.
For more information, request Catalog
1654714.
Lightweight, air-operated
modular tooling system.
Accepts a wide variety of
interchangeable heads for
crimping various types of
contacts, terminals and
splices onto wires ranging
6-26 AWG [13-0.12 mm2],
plus coaxial and fiber optic
cable. Available with either
hand- or foot-actuation
switch. Optional ratchet
control available to provide
complete crimp cycle.
These tools are ideal for small production, prototype and experimental applications. They are used for terminating pin
and socket contacts to wire and feature a
ratchet device to provide consistently
formed crimps.
112076
CERTI-CRIMP Straight
Action Hand Tools (SAHT)
92936-8
CERTI-CRIMP “C” Head
Straight Action Hand Tool
(SAHT), Part No. 69710-1
Pneumatic Hand Tool for
Interchangeable Die Sets
626 Pneumatic Tool System
112383
SDE Terminator,
Part No. 1490076-2
For Type III+ contacts, see pages 17-19.
For more information, request Catalog
65780.
For subminiature coaxial contacts, see
pages 22-23.
For more information, request Catalog
65780, Instruction Sheet 408-2095.
Application Tooling
Electric Machine for
Interchangeable Die Sets
For use with Type III+ contacts, see
pages 17-19.
For more information, request Catalog
1773380, Instruction Sheet 408-9930.
For subminiature coaxial contacts, see
pages 22-23.
For more information, request Catalog
124208.
79
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Application Tooling (Continued)
Crimp Machines
Semiautomatic bench
machines for crimping
reeled terminals and contacts, featuring a quiet and
reliable direct motor drive,
microprocessor controls for
ease of setup and operation, and guarding and
lighting designed for operator convenience and safety.
All models are equipped
with either manual or automatic precision adjustment
of crimp height. Machinemounted sensors are available for crimp quality monitoring using conventional
miniature-style applicators.
AMP-TAPETRONIC Machine,
Part No. 69875
AMP-O-LECTRIC Model “K”
Terminating Machine with a
permanently-mounted
applicator that accepts
interchangeable die sets to
apply a variety of tapemounted terminals and
splices. Many of the die
sets can also be used in
AMP-O-LECTRIC
Terminating Machines with
a tape applicator.
For more information, contact Tyco
Electronics.
103330
AMP-O-LECTRIC Model “G”
Terminating Machines,
Part Nos. 354500-1, -9, -11
For more information, request
Catalog 1654956-2, Video 198116,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
Note: New Stripping Module
available, see page 79.
Crimp Quality Monitor (CQM)
Part No. 1320420-2
The unique system provides
100% on-the-fly crimp
inspection. It measures the
crimp height of each
termination, and evaluates
the quality of each crimp. If
a crimp is questionable, the
monitor alerts the operator
with both visual and audible
alarms. It also provides
ports for printing and
networking. When used with
AMP-O-LECTRIC Model “G”
Termination Machines, the
monitor is mounted to the
machine. When used with
AMPOMATOR CLS IV Lead
Making Machines, it is
integrated into the
machine’s operating
system.
Application Tooling
For more information, request
Catalog 82275.
System III Applicator
For more information, request Catalog
1654956-8
The System III Applicator
introduces several new
technologies into the
applicator including a
precision servo-electric
motorized feeding system,
a built-in data module for
storing terminal crimp and
set-up information, a
precision fit round ram, and
a newly designed terminal
depressor. It still utilizes the
proven quality of the HD-M
crimper and anvil tooling.
AMP 3K/40 and AMP 5K/40
Terminating Machines
■
■
■
■
■
■
The AMP 3K/40 and AMP
5K/40 Terminators are
designed for customers that
require the increased
output and quality of a
semiautomatic machine at
a competitive price. By
incorporating the most
commonly requested
features as standard and
offering a long list of
optional equipment, these
terminators offer flexibility to
meet the specific needs of
various applications at the
lowest possible cost.
3,000 lb [1361 kg] max.
crimp force (AMP 3K/40);
5,000 lb [2268 kg] max.
crimp force (AMP 5K/40)
Toolless removal of
applicators and guards
Jog capability
Quiet, fast operation —
80/76 dBA and cycle time
less than 0.400 seconds
Accepts Heavy Duty Mini
stye applicators
Wide range of optional
equipment such as toolless
precision crimp height
adjust, batch counter, CQM
capability and work light
For more information, request
Catalog 1654956-2.
Note: New Stripping Module
available, see page 79.
80
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Application Tooling (Continued)
Lead Makers
This fully-automatic, PCcontrolled leadmaker can be
equipped with up to three
processing stations enabling
the crimping of both ends of
the wire, double-crimp
connections with three
different contacts, singleended seal applications,
tinning or ink-jet marking.
Features include ultra-short
conversions times, easy-touse graphic-based TopWin
interface with multiplelanguage capability, crimp
force analyzer with statistical
analysis, seal monitoring, and
integrated good/bad sorting.
Komax gamma 333 PC
Lead-Making Machine
Komax 433-S alpha
Lead-Making Machine
For more information, request
Catalog 1307901.
The AMPOMATOR System III
Leadmaker is designed for
the demands of lowvolume/high mix
manufacturing and precision
quality. This leadmaker
combines the best wire
processing capabilities with
new technologies in terminal
feeding and machine set-up
found in the System III
Applicator to offer significant
advantages for higher
throughput and efficiencies.
AMPOMATOR System III
Leadmaker
For more information, request
Catalog 1307801.
Applicators
End-Feed Heavy-Duty
Miniature Applicators
(coded HDM)
See catalog 1654956-5 for more
information.
Fully-automatic machines
that measure, cut, strip and
terminate single leads.
Microprocessor-controlled,
and programmed and
operated using an easy-tofollow, menu-driven touchscreen. Features include
direct-drive terminating
units with precision crimp
height adjustment, fully
programmable setups, wire
runout and splice detection,
and motorized pre-feed with
wire straightener. Crimp
quality monitoring is also
available.
Interchangeable applicators
for crimping products
reeled end-to-end (primarily
open-barrel terminals).
Used in bench and leadmaking machines; most
designs can be used, or
adapted for use with minor
tooling changes, dial-in settings for different wire sizes
and insulation diameters.
Mechanical or air-powered
feed systems, depending
on the product applied.
For more information, request
Catalog 296393-2 and
Instruction Sheet 408-8039.
EDGE Applicator Counter
For more information, request
Catalog 124324, Video 198142
(NTSC), 199609 (PAL).
The new EDGE counter tracks
wearable tool usage for the
most effective maintenance
planning. The completely
electronic counter, with clear
LCD display, indicates cycles
since installation. By
performing maintenance at
measured intervals with preset limits, operators avoid
breakdowns and rejects
caused by tool wear or misadjustment. A wireless
interface transfers counters to
a PC running the optional
Edge Counter Software Pack.
The EDGE is standard on all
new applicators and can be
retrofitted to most existing
Tyco Electronics applicators.
Application Tooling
110234
AMPOMATOR CLS IV+
Lead-Making Machines,
Part Nos. 356500-1, -2;
1213400-1, -2
The 433-S alpha offers
maximum flexibility for
applying seals to one or both
ends of the wire with the
corresponding terminal. When
equipped with the mci 711
crimp terminator and mci 761
seal applicator, the fullyautomated 433-S alpha forms
a highly compact system with
optimum accessibility.
Dynamic servo-drives provide
fine travel settings on all motor
axes and the wire straightening
unit with quick-release lock and
automatic lead-in feature
reduces wire changeover time.
The TopWin software provides
for fast, simple data input.
See catalog 1773385 for more information.
81
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Application Tooling (Continued)
Interchangeable applicators
for crimping products
reeled side-by-side on single or dual carrier strips
(primarily closed-barrel terminals and open-barrel contacts). Similar design as the
end-feed version. All sidefeed applicators include a
wire stop to help correctly
position the wire end in the
crimping target area.
Side-Feed Heavy-Duty
Miniature Applicators
(coded HDM)
Stripping Module (for the
AMP 3K/40 and AMP 5K/40
Terminating Machines and
AMP-O-LECTRIC Model “G”
Terminator on page 77)
89828
For more information, request
Catalog 1309085.
Interchangeable applicators
for crimping products in
AMP-O-MATIC StripperCrimper Machines. Consist
of separate ram and lower
tooling assemblies. Similar
dial-in settings for different
wire sizes and insulation
diameters as HDM
applicators. Available with
sensors for use with the
Crimp Quality Monitor.
Stripper-Crimper
Applicators (coded SCA)
112075-2
For more information, request
Catalog 296393-2 and
Instruction Sheet 408-8040.
Komax Delta 60
Wire Stripper
For more information, request Catalog
65004 (AMP-O-MATIC StripperCrimper Machines), Catalog 82275
[Crimp Quality Monitor (CQM)].
89827
Cosmic 30M Wire Stripping
Machine, 5-528367-0
Application Tooling
Semiautomatic bench
crimping machines that also
strip the wire, and are therefore used for terminating
jacketed cable. Feature
manual precision adjustment of crimp height, keyed
strip blades for faster, more
accurate setups, and an
efficient scrap removal system. All adjustments can be
made from the front of the
machines without special
tools. Available with crimp
quality monitoring.
The semiautomatic Delta 60 is
designed to strip single- and
multiple-pole conductors with
pull-off lengths of .984 [25] or
3.78 [96]. Thanks to the
electric drive and nonpneumatic design, the device
is quick and quiet in operation
and can be utilized virtually
anywhere. The Delta 60 can
desheath or strip stranded
conductors and multiple wire
cables with external diameters
of up to .433 [11].
See catalog 1654956 for more information.
Stripper-Crimper Machines
AMP-O-MATIC StripperCrimper Machines,
Part Nos. 1320895-1, -2
The combination of the
Stripping Module with the
AMP 3K/40 and AMP 5K/40
Terminating Machines or
the AMP-O-LECTRIC
Model “G” Terminator
provides an economic and
proficient method of
stripping the wire and
crimping terminals on the
same machine. The module
accepts End- and SideFeed HDM Applicators
(32-14 AWG) and operates
in three modes: crimp only,
strip only, or strip and
crimp. It can be installed
on existing machines in the
field or purchased as one
unit from the factory.
The Cosmic 30M is a high
precision, high speed
electrical wire stripper that is
very easy to operate. It’s
equipped with a four blade
system and an optional
gripper for more difficult wires.
There is a digital display for
the wire diameter that can be
set at 0.01 mm increments.
See catalog 1773385-2 for more
information.
Cosmic 927R Micro-Cable
Stripper
For more information, request
Catalog 65004, Video 198075, Catalog
82275 [Crimp Quality Monitor
(CQM)], Video 198094.
The compact, lightweight,
benchtop Cosmic 927R was
designed and developed to
reliably strip various insulation
materials and micro-cable.
From conductor diameter
36 to 10 AWG, the stripping
diameter display can be set to
within 0.1 mm increments.
See catalog 1773385-4 for more
information.
82
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification tests. They are intended for
the Design, Component and Quality Engineer.
108-1579
108-2079
108-10024
108-10024-2
108-10024-3
108-10024-4
108-10037
108-10040
108-10042
108-40005
Sealed CPC Connectors with Removable Contacts
Miniature CPC Connectors
CPC Connectors
(Series 1)
(Series 2)
(Series 3 & 4)
Contacts, Type XII
Metal-Shell CPC Connectors
Contacts, Type III +
Contacts, Size 20 DF
Application Specifications describe requirements for using the product in its intended application and/or
crimping information. They are intended for the Packaging and Design Engineer and the Machine Setup Person.
114-10000
114-10004
114-10005
114-10038
Contacts, Size 20 DF
Contacts, Type III +
Contacts, Type XII
CPC Connectors
Instruction Sheets provide instructions for assembling or applying the product. They are intended for the
Manufacturing Assembler or Operator.
408-4317
408-6641
408-7582
408-7593
408-7901
408-8416
Two-Piece Sealed CPC Connectors
Metal-Shell CPC Connectors
Accessories for CPC Connectors
CPC Connectors
Application and Maintenance for AMP Hand Crimp Tool
CPC Right-Angle Cable Clamp Assembly
Application Tooling/Instruction Sheet Cross Reference
Tool Part No.
58495-1
69710-1
91019-3
91067-2
Instruction Sheet
408-9819
408-2095
408-7276
408-7508
Tool Part No.
91285-1
305183
318813-1
Instruction Sheet
408-9404
408-1216
408-4374
Technical Documents
83
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Part Number Index
Note: This part number index lists
all cataloged parts by base number
only. Complete part numbers (with
prefixes and/or suffixes) are shown
on the pages indicated.
Part Number Index
Part Number
51565
54010
54011
54012
54123
66098
66099
66100
66101
66102
66103
66104
66105
66106
66107
66108
66109
66180
66181
66182
66183
66253
66254
66255
66256
66259
66260
66261
66262
66331
66332
66358
66359
66360
66361
66393
66394
66399
66400
66405
66406
66424
66425
66428
66429
66504
66505
66506
66507
66563
66564
66565
66566
66569
66570
66597
66598
66600
66601
Page
22,23
52
52
52,71
52
17
17
17
17
17
17
17
17
17
17
17
17
20
20
20
20
34
34
34
34
34
34
34
34
17
17
17,18
17,18
17,18
17,18
17
17
17
17
17
17
17
17
17
17
29
29
29
29
17,57
17
17,57
17
30
30
17,18
17,18,57
17
17,18,57
Part Number
66602
66740
66741
81665
164159
164160
164161
164162
164163
164164
193844
193846
193990
193991
200333
200336
200821
201328
201330
201332
201334
201568
201570
201578
201580
201611
201613
202236
202237
202410
202411
202507
202508
202725
202726
204219
205089
205090
205838
205839
205840
205841
205842
205843
206036
206037
206038
206039
206043
206044
206060
206061
206062
206070
206125
206126
206127
206136
206137
206138
206150
206151
206152
206153
206207
Page
17,18
34
34
44,48,49,50,51
19
19
19
19
19
19
19
19
35
35
21
21
42
21
21
21
21
21
21
21
21
21
21
20
20
21
21
21
21
21
21
21
30
30
26,28
26
26
26
26
26
10,33,35,50
10,14,16,33,35,50
26
26
10,50
10,15,50
10,14,15,50
10,50
38
38,48,49,56
28
28
28
33
33
38
10,15,16,50
10,50
26
10,50
33
Part Number
206226
206227
206304
206305
206306
206322
206358
206404
206425
206426
206429
206430
206433
206434
206437
206438
206455
206458
206460
206485
206486
206508
206509
206512
206516
206518
206552
206554
206612
206613
206705
206708
206837
206838
206852
206903
206934
206966
207008
207052
207055
207216
207241
207292
207299
207303
207369
207387
207445
207446
207485
207486
207489
207490
207597
207774
207825
207890
208130
208131
208132
208223
208224
208283
208337
Page
33
33
53
10,15,50
10,50
38,48,49,56
38
14
33
33
10,15,50
10,50
26
26
26
26
27
28
28
26
26
42
42
38,53
14
14
14
14
37
37
10,50
10,15,50
10,15,16,50
10,50
27
52
12
38
38
53
40
27
41
13
40
12
27
41
52
52
37
37
41
41
42
39
12
13
10
10,50
12
12
13
13
44
Part Number
208338
208457
208459
208470
208471
208472
208473
208474
208475
208476
208477
208478
208479
208480
208481
208482
208483
208484
208485
208486
208487
208488
208489
208490
208491
208492
208493
208494
208495
208496
208497
208652
208657
208680
208714
208715
208716
208717
208718
208719
208720
208721
208800
208945
211102
211103
211398
211399
211400
211401
211766
211767
211768
211769
211770
211771
211772
211773
211824
211825
211839
211870
211903
211904
212618
Page
44
59
59
59
59
60
60
63
63
62
62
68
68
68
68
65
65
66
66
60
60
59
59
62
62
63
63
65
65
66
66
52
27
52
59
59
60
60
59
59
60
60
52
71
10
10
11
11,15,16,50
11,15
11,50
11,15
11
11,15
11
11,15
11
11,15
11
37
37
10
52
71
71
21
84
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Part Number Index (Continued)
Part Number
Page
52
56
56
33
12
57
57
56
56
56
57
57
57
13
12
13
12
12
10,11,26,33,48,49
10,26
10,11,26,33,37
10,11
71
13
13
13
13
47
47
47
47
10
10
10
10
11
11
12
12
13
12
13
12
10
10
10
10
11
11
48
48
49
49
48,51
49,51
48,49
48,49
48
49
51
51
51
51
52
39
Part Number
225088
226537
332056
332057
539972
745253
745254
770834
770835
770901
770902
770903
770904
770834
770985
770986
770987
770988
787610
788085
788088
788130
788153
788154
788155
788157
788158
788159
788188
788189
794058
795059
796075
796094
796095
796096
796112
796188
796190
796203
796207
796257
796260
796271
796272
796273
796274
796275
796276
796286
796287
796288
796291
796329
796330
796332
796348
796375
796379
796380
796381
796382
796387
796403
796404
Page
Part Number
22
22,23
22
22,23
19
29
29
75
75
75
75
75
75
75
75
75
75
75
10
17
17
13
44
44
44
44
44
44
45
45
75
75
44
44
44
44
45
44
44
45
45
54
54
44
44
44
44
44
44
44
44
44
44
27
45
45
15
15
39
39
39
39
15
15
15
796405
796406
796407
796409
796433
796435
796437
796439
796449
796450
796497
796500
796501
796502
796964
796966
969789
969803
969807
969809
969811
969813
969817
1445389
1445390
1445420
1445421
1445510
1445522
1445526
1445534
1445535
1445536
1445537
1445538
1445539
1445730
1445771
1445807
1445816
1445817
1445818
1445819
1445820
1445821
1445822
1445823
1445834
1445825
1445826
1445827
1445828
1445829
1445856
1445904
1546347
1546348
1546349
1546350
1546746
1546921
1546997
1604089
1604196
1658537
Page
15
15
15
15
12
15
10
11
10
11
15
15
15
15
19
19
54
54
54
54
54
54
54
75
75
75
75
75
75
75
75
75
75
75
75
75
74
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
74
75
39
39
39
39
75
75
75
75
75
29
Part Number
1658538
1658539
1658540
1658543
1658544
1776088
1776089
1776903
1776904
1776905
1776906
5019024
5066682
5066683
Page
29
26
29
29
29
68
68
16
16
16
16
38
29
29
Part Number Index
213485
213570
213571
213581
213588
213603
213605
213650
213651
213652
213667
213668
213671
213729
213780
213781
213782
213798
213810
213811
213812
213813
213823
213825
213826
213827
213828
213841
213843
213845
213847
213848
213849
213850
213851
213852
213853
213854
213855
213856
213857
213858
213859
213860
213862
213864
213866
213868
213870
213889
213890
213893
213894
213899
213900
213902
213904
213905
213906
213919
213920
213925
213926
213933
213982
85
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Tooling Part Number Index
Part Number
58448
58495
58541
69656
69690
69710
69875
90136
90140
90145
90225
90230
90231
90249
90250
90716
90717
90758
90759
90870
91002
91019
91067
91285
91503
91505
91515
91519
Page
29
17,19,80
21
23
23
22,23,34,47,76,80
21,77
21
34
34
17
21
21
21
21
17
75
75
75
75
17
34,80
80
29,80
29
17,19
17,19
17,18
Part Number
91521
91522
91523
91525
91529
91538
91539
91542
91549
91911
189721
189722
189727
189928
200893
217201
224155
305183
318161
318813
354500
354940
356114
356119
356304
Page
17,18, 57
75
17,19
29
75
21
21,22
17,57
29
23
17,18,19,21,22,
23,29,34,47,57
17,18,19,21,22,
23,29,34,47,57
75
17,18,19,21,22,
23,29,34,47,57
17,21
17,18,19,29,57
35
17,19,20,21,22,23,57,80
21,22,23,34,47
47,80
47,77
23
35
35
17,18,19,21,22,23,
29,34,47,57
Part Number
Page
356500
356611
356612
455830
466321
466323
466324
466325
466326
466383
466422
466423
466585
466598
466741
466758
466900
466901
466906
466907
466908
466923
466942
466958
466963
466968
466979
567021
567036
78
47
47
75
17
17,19
17
17
17,18
17
29
29
17
17
19
29
29
29
17
17,19
17
17,18
17
17,18,57
29
29
17
34
29
Part Number
Page
567066
567067
567363
567364
567418
567455
567801
567804
567834
567849
567867
567947
601966
601967
680114
680195
680197
680602
725840
1016002
1016015
1213400
1320420
1320895
1490076
1604816
75
75
17,57
17,18,57
75
34
29
29
57
29
17
17
30
19,21,22
19
47
47
17
19
29
29
78
77
79
76
75
Part Number Index
Cross Reference: Non-Compliant to RoHS Compliant Part Numbers
NonCompliant
Part No.
19024-1
19024-2
19024-3
19024-4
19024-5
45098
66098-2
66098-7
66099-2
66100-7
66101-2
66102-7
66103-2
66104-7
2-66104-5
66105-2
66106-6
66107-2
66108-6
66109-2
66331-5
66332-5
66358-6
1-66358-2
1-66358-4
2-66358-0
66359-6
1-66359-1
RoHS
Compliant
Part No.
5019024-1
5019024-2
5019024-3
5019024-4
5019024-5
91539-1
1-66098-9
1-66098-8
1-66099-5
1-66100-9
1-66101-9
2-66102-5
1-66103-8
3-66104-0
3-66104-0
1-66105-9
1-66106-5
1-66107-1
1-66108-5
1-66109-7
1-66331-4
1-66332-4
1-66358-6
1-66358-8
1-66358-6
2-66358-1
1-66359-4
1-66359-5
38
38
38
38
38
21,22
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17,18
17,18
17,18
17,18
17
17,18
1-66359-7
66360-2
1-66360-5
66361-2
1-66361-5
66399-1
66400-1
66424-6
66425-6
5-66504-6
5-66504-7
5-66504-9
6-66504-0
5-66505-7
6-66505-0
6-66505-2
2-66506-4
2-66506-5
5-66506-7
5-66506-9
3-66507-0
3-66507-1
1-66359-9
1-66360-2
1-66360-6
1-66361-2
1-66361-6
1-66399-0
1-66400-0
1-66424-1
1-66425-2
1658537-1
1658537-2
1658537-3
1658537-4
1658538-3
1658538-2
66505-9
1658539-1
1658539-2
1658539-3
1658539-4
1658540-4
1658540-1
17,18
17,18
17,18
17,18
17,18
17
17
17
17
29
29
29
29
29
29
29
29
29
29
29
29
29
Page
NonCompliant
Part No.
5-66507-7
5-66507-9
66563-6
66564-6
66565-2
66566-2
66597-1
66598-1
66598-7
66601-1
66602-1
66682-6
66682-9
1-66682-1
66683-7
1-66683-0
202236-1
202236-2
202237-1
202237-2
206062-3
206062-4
206070-1
206070-3
206138-1
206138-2
206322-1
206322-2
206358-1
206358-2
206455-1
206455-2
206512-1
206512-2
206852-1
206852-2
206934-1
206934-6
206934-7
206934-9
206966-1
206966-2
207008-1
207008-2
207216-2
207216-8
207303-1
207303-3
1-207303-1
207369-1
RoHS
Compliant
Part No.
1658540-5
1658540-2
1-66563-1
1-66564-2
66565-7
66566-7
66597-8
66598-9
1-66598-0
1-66598-4
66601-9
66602-8
5066682-6
5066682-9
66682-4
5066683-7
1-5066683-0
202236-7
202236-5
202237-7
202237-5
1-206062-4
1-206062-7
206070-8
1-206070-0
206138-8
1-206138-0
206322-9
1-206322-0
206358-5
206358-6
1-206455-1
1-206455-2
206512-5
206512-6
1-206852-1
1-206852-2
1-206934-1
1-206934-8
1-206934-9
1-206934-7
206966-7
206966-9
207008-5
207008-6
1-207216-6
1-207216-7
1-207303-5
1-207303-3
1-207303-4
1-207369-1
Page
29
29
17,57
17
17,57
17
17,18
17,18,57
17,18,57
17,18,57
17,18
29
29
29
29
29
20
20
20
20
38
38
38,48,49,56
38,48,49,56
38
38
38,48,49,56
38,48,49,56
38
38
27
27
38,53
38,53
27
27
12
12
12
12
38
38
38
38
27
27
12
12
12
27
NonCompliant
Part No.
207369-3
207774-1
207774-2
207825-1
207890-1
208132-1
208223-1
208223-3
208224-1
208224-2
208283-1
208657-1
208657-5
213588-1
213603-1
213603-2
213605-1
213729-1
213729-2
213729-4
213780-1
213781-1
213782-1
213798-1
213825-1
213826-1
213827-1
213828-1
213854-1
213855-1
213855-2
213856-1
213857-1
213858-1
213859-1
213902-1
213904-1
225088-1
225088-3
466598-1
1-745253-1
1-745253-3
1-745253-4
1-745253-6
1-745254-1
1-745254-3
1-745254-4
1-745254-6
770834-3
770834-6
770835-3
RoHS
Compliant
Part No.
1-207369-3
207774-3
207774-4
207825-9
207890-2
208132-2
208223-9
1-208223-0
2-208224-1
1-208224-2
208283-4
1-208657-1
1-208657-0
213588-2
213603-5
213603-6
213605-7
213729-9
213729-6
213729-8
213780-2
213781-9
213782-4
213798-3
1-213825-7
1-213826-1
213827-8
1-213828-6
213854-3
213855-4
213855-3
213856-4
213857-2
213858-3
213859-2
213902-3
213904-3
5-225088-1
5-225088-3
466598-2
1658543-3
1-745253-6
1658543-2
1658543-1
1658544-3
1-745254-6
1658544-2
1658544-1
1-770834-0
1-770834-1
1-770835-0
Page
27
39
39
12
13
12
12
12
13
13
13
27
27
12
57
57
57
13
13
13
12
13
12
12
13
13
13
13
12
12
12
13
12
13
12
48,49
48,49
22
22
17
29
29
29
29
29
29
29
29
75
75
75
NonCompliant
Part No.
770901-3
770902-3
770902-6
770903-3
770904-3
770904-6
770985-3
770986-3
770987-3
770988-3
788130-1
794058-3
794059-3
796329-1
796348-1
796375-1
796375-2
796379-1
796380-1
796381-1
796382-1
796387-1
796387-2
796403-1
796403-2
796404-1
796405-1
796406-1
796407-1
796409-1
796433-1
796435-1
796435-2
796497-1
796500-1
796501-1
796502-1
1490076-1
1546347-1
1546348-1
1546349-1
1546350-1
1546746-1
1546746-2
RoHS
Compliant
Part No.
1-770901-0
1-770902-0
1-770902-1
1-770903-0
1-770904-0
1-770904-1
1-770985-0
1-770986-0
1-770987-0
1-770988-0
1-788130-1
1-794058-0
1-794059-0
1-796329-1
796348-2
1-796375-1
1-796375-2
796379-2
796380-2
796381-2
796382-2
1-796387-1
1-796387-2
1-796403-1
1-796403-2
1-796404-1
1-796405-1
1-796406-1
1-796407-1
1-796409-1
1-796433-1
1-796435-1
1-796435-2
1-796497-1
1-796500-1
1-796501-1
1-796502-1
1490076-2
1546347-2
1546348-2
1546349-2
1546350-2
1546746-3
1546746-4
Page
75
75
75
75
75
75
75
75
75
75
13
75
75
27
16
16
16
39
39
39
39
16
16
16
16
16
16
16
16
16
12
16
16
16
16
16
16
76
39
39
39
39
75
75
86
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Circular Connectors for
Commercial Signal and Power Applications
Global Contacts
Americas
Argentina – Buenos Aires
Phone:
+54-11-4733-2200
Fax:
+54-11-4733-2211
Brasil – São Paulo
Phone:
+55-11-3611-1311
Fax:
+55-11-3611-0397
Canada – Toronto
Phone:
+905-475-6222
Fax:
+905-474-5520
Product Information Center:
(Technical Support)
Phone:
+905-470-4425
Fax:
+905-474-5525
Colombia – Bogota
Phone:
+57-1-231-9398
Fax:
+57-1-660-0206
Mexico – Mexico City
Phone:
+52-55-1106-0800
+01-800-733-8926
Fax:
+52-55-1106-0901
For Latin/South American
Countries not shown
Phone:
+54-11-4733-2015
Fax:
+54-11-4733-2083
United States – Harrisburg, PA
Phone:
+717-564-0100
Fax:
+717-986-7575
Product Information Center:
(Technical Support)
Phone:
+800-522-6752
Fax:
+717-986-7575
Asia/ Pacific
Australia – Sydney
Phone:
+61-2-9554-2600
Fax:
+61-2-9502-2556
Product Information Center:
(Technical Support)
Phone:
+61-2-9840-8200
Fax:
+61-2-9634-6188
India – Bangalore
Phone:
+91-80-285-40800
Fax:
+91-80-285-40820
Indonesia – Jakarta
Phone:
+65-6482-0311
Fax:
+65-6482-1012
Japan – Toyko
Phone:
+81-44-844-8111
Fax:
+81-44-812-3207
Raychem & Identification Products
Phone:
+81-44-844-8183
Fax:
+81-44-844-8184
Product Information Center:
(Technical Support)
Phone:
+81-44-844-8013
Fax:
+81-44-812-3200
Korea – Seoul
Phone:
+82-2-3415-4500
Fax:
+82-2-3486-3810
Malaysia – Kuala Lumpur
Phone:
+60-3-78053055
Fax:
+60-3-78053066
New Zealand – Auckland
Phone:
+64-9-634-4580
Fax:
+64-9-634-4586
Philippines – Makati City
Phone:
+632-848-0171
Fax:
+632-867-8661
People’s Republic of China
Hong Kong
Phone:
+852-2735-1628
Fax:
+852-2735-0243
Shanghai
Phone:
+86-21-2407-1588
Fax:
+86-21-2407-1599
Taiwan – Taipei
Phone:
+886-2-8768-2788
Fax:
+886-2-8768-2268
Singapore – Singapore
Phone:
+65-6482-0311
Fax:
+65-6482-1012
Raychem Products
Phone:
+65-4866-151
Fax:
+65-6545-514
Identification Products
Phone:
+65 (0) 6482-0311
Fax:
+65 (0) 6481-5514
Thailand – Bangkok
Phone:
+66-2-955-0500
Fax:
+66-2-955-0505
Vietnam and Indochina –
Ho Chi Minh City
Phone:
+84-8 930-5546
Fax:
+84-8 930-3443
Europe/ Middle East/Africa
Austria – Vienna
Phone:
+43-1 90 5 60-0
Fax:
+43-1 90 5 60-1333
Germany – Langen
Phone:
+49-6103-709-0
Fax:
+49-6103-709-1223
Belgium – Kessel-Lo
Phone:
+32-16-35-23-00
Fax:
+32-16-35-23-52
Germany – Speyer
Phone:
+49-6232-30-0
Fax:
+49-6232-30-2243
Bulgaria – Sofia
Phone:
+359-2-971-2152
Fax:
+359-2-971-2153
Germany - HTS Division – Neunkirchen
Phone:
+49-2247-305-0
Fax:
+49-2247-305-122
Czech Republic – Kurim
Phone:
+420-5-41-162-111
Fax:
+420-5-41-162-223
Greece – Athens
Phone:
+30-210-9370-396/397
Fax:
+30-210-9370-655
Denmark – Glostrup
Phone:
+45-43-480-452
Fax:
+45-43-441-414
Egypt – Cairo
Phone:
+20-2-29 04 281
Fax:
+20-2-41 92 334
Estonia – Tartu
Phone:
+372-5138-274
Fax:
+372-7400-779
Finland – Helsinki
Phone:
+358-95-12-34-20
Fax:
+358-95-12-34-250
France – Cergy-Pontoise
Phone:
+33-1-3420-8888
Fax:
+33-1-3420-8600
Product Information Center:
(Technical Support)
Phone:
+33-1-3420-8943
Fax:
+33-1-3420-8623
Germany – Bensheim
Phone:
+49-6251-133-0
Fax:
+49-6251-133-1600
Product Information Center:
(Technical Support)
Phone:
+49-6251-133-1999
Fax:
+49-6251-133-1988
Hungary – Budapest
Phone:
+36-1-289-1000
Fax:
+36-1-289-1010
Ireland – Dublin
Phone:
+353-1-820-3000
Fax:
+353-1-820-9790
Poland – Warsaw
Phone:
+48-22-45-76-700
Fax:
+48-22-45-76-720
Romania – Bucharest
Phone:
+40-21-311-3479/3596
Fax:
+40-21-312-0574
Russia – Moscow
Phone:
+7-495-926-5506/07/08/09
Fax:
+7-495-926-5505
Russia – St. Petersburg
Phone:
+7-812-718-8192
Fax:
+7-812-718-8193
Slovenia – Ljubljana
Phone:
+386-1561-3270
Fax:
+386-1561-3240
Italy – Collegno (Torino)
Phone:
+39-011-4012-111
Fax:
+39-011-4031116
Lithuania – Vilnius
Phone:
+370-5-2131-402
Fax:
+370-5-2131-403
Sweden – Upplands Väsby
Phone:
+46-8-50-72-50-00
Fax:
+46-8-50-72-50-01
Netherlands – ’s-Hertogenbosch
Phone:
+31-73-624-62-46
Fax:
+31-73-621-23-65
Product Information Center:
(Technical Support)
Phone:
+31-73-6246-999
Fax:
+31-73-6246-998
Norway – Nesbru
Phone:
+47-66-77-8886
Fax:
+47-66-77-8855
United Kingdom – Raychem &
Identification Products
Phone:
+44-1793-528171
Fax:
+44-1793-572-516
For Middle East/African Countries Not
Shown
Phone:
+33-1-3420-8866
Fax:
+33-1-3420-8300
South Africa – Port Elizabeth
Phone:
+2741-503-4500
Fax:
+2741-581-0440
Spain – Barcelona
Phone:
+34-93-291-0330
Fax:
+34-93-201-7879
Product Information Center:
(Technical Support):
Phone:
+34-93-291-0330
Fax:
+34-93-200-3779
Israel – Yokneam
Phone:
+972-4-959-0508
Fax:
+972-4-959-0506
United Kingdom – Swindon
Phone:
+44-8706-080-208
Fax:
+44-1793-572-109
Product Information Center:
(Technical Support)
Freephone GB: 0800-267-666
Phone:
+44-208-420-8341 or 8343
+44-208-420-8081
Switzerland – Steinach
Phone:
+41-71-447-0447
Fax:
+41-71-447-0444
Turkey – Istanbul
Phone:
+90-212-281-8181/2/3
Fax:
+90-212-281-8184
Ukraine – Kiev
Phone:
+380-044-206-2265
Fax:
+380-044-206-2264
87
Printed in the U.S.A.
Tyco Electronics Corporation
www.tycoelectronics.com
RoHS
Ready
AMP Circular Connectors
for Commercial Signal &
Power Applications
Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
82021-XXX-MS-FP-Rev. 6-07 OG3B
工商网监
湘ICP备2023018690号
