55/0314-26-9CS2793

SCD SPECIFICATION CONTROL DRAWING 55/0314 Date Revision WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED, 9-27-18 ULTRA LIGHTWEIGHT, OUTER SPACE, 600 VOLT This specification sheet forms a part of the latest issue of Raychem Specification 55/. Title CONDUCTOR - SILVER-COATED HIGH-STRENGTH COPPER ALLOY J INSULATION - RADIATION-CROSSLINKED, MODIFIED ETFE TABLE I. CONSTRUCTION DETAILS DIAMETER OF STRANDED CONDUCTOR (inch) FINISHED WIRE PART NUMBER 1/ WIRE SIZE (AWG) CONDUCTOR STRANDING (number x AWG) 55/0314-30-* 30 7 x 38 55/0314-28-* 28 7 x 36 .0140 .0150 74.4 .0225 ± .0015 .76 55/0314-26-* 26 19 x 38 .0175 .0191 44.8 .0274 ± .0017 1.22 55/0314-24-* 24 19 x 36 .0225 .0241 28.4 .0322 ± .0017 1.79 55/0314-22-* 22 19 x 34 .0285 .0301 17.5 .0390 ± .0017 2.70 55/0314-20-* 20 19 x 32 .0365 .0385 10.7 .0495 ± .0017 4.27 55/0314-18-* 18 19 x 30 .0452 .0476 6.8 .0590 ± .0017 6.56 55/0314-16-* 16 19 x 29 .0514 .0538 5.3 .0665 ± .0019 8.33 MINIMUM MAXIMUM MAXIMUM RESISTANCE AT 20°C (ohms/1000 ft.) .0110 .0120 117.4 MAXIMUM WEIGHT (lbs/1000 ft.) DIAMETER (inch) .0195 ± .0015 .52 TABLE II. PERFORMANCE DETAILS PART NUMBER 1/ CROSSLINKED VERIFICATION - BEND TESTING MANDREL DIAMETER (inch) (± 3%) WEIGHT (lb) (± 3%) 55/0314-30-* .250 .063 55/0314-28-* .250 .063 55/0314-26-* .375 .063 55/0314-24-* .375 .125 55/0314-22-* .500 .188 55/0314-20-* .500 .250 55/0314-18-* .500 .250 55/0314-16-* .750 .375 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE Connectivity, and TE connectivity (logo) are trademarks. Page 1 of 2 DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL. THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Raychem Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-522-6752 Fax: 1-650-361-6297 © 2006-2018 TE Connectivity Ltd. family of companies. All Rights Reserved. Page SPECIFICATION CONTROL DRAWING 2 of 2 Revision SCD J 55/0314 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200°C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level COLOR: White preferred CONCENTRICITY: 80% (minimum) CROSSLINKED VERIFICATION: 300 ± 3°C for 1 hour IDENTIFICATION AND COLOR STRIPING DURABILITY: 125 cycles (250 strokes) (minimum), 500 g weight INSULATION ELONGATION: 50% (minimum) INSULATION FLAWS: Spark Test, 1.5 kV (rms) (30-24 AWG) 3.0 kV (rms) (22-16 AWG) Impulse Dielectric Test, 6.0 kV (peak) INSULATION THICKNESS: .004 in. (nominal) RADIATION RESISTANCE: 500 megarads SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 in. (maximum) in 12 inches VACUUM STABILITY: Total Mass Loss (TML), 1.00% (maximum) Volatile Condensable Material (VCM): 0.10% (maximum) VOLTAGE WITHSTAND (Post Environmental): 1500 volts (rms), 60 Hz, 5 minutes 1/ PART NUMBER: The "*" in the part numbers in Tables I and II shall be replaced by a color code designator. Example: AWG 28, white: 55/0314-28-9 AWG 28, white with a black stripe: 55/0314-28-90 1/ See footer section on page 1