55A6359-22-0CS1999

SCD SPECIFICATION CONTROL DRAWING 55A6359 Date Revision WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED, 9-25-17 LIGHTWEIGHT, GENERAL PURPOSE, 600 VOLT This specification sheet forms a part of the latest issue of Raychem Specification 55A. Title CONDUCTOR - SILVER-COATED HIGH-STRENGTH COPPER ALLOY K INSULATION - RADIATION-CROSSLINKED, MODIFIED ETFE TABLE I. CONSTRUCTION DETAILS PART NUMBER 1/ WIRE SIZE (AWG) CONDUCTOR STRANDING (number x AWG) DIAMETER OF STRANDED CONDUCTOR (inch) FINISHED WIRE MINIMUM MAXIMUM MAXIMUM RESISTANCE AT 20°C (ohms/1000 ft.) DIAMETER (inch) MAXIMUM WEIGHT (lbs/1000 ft.) 55A6359-28-* 28 7 x 36 .014 .016 74.4 .027 ± .002 55A6359-26-* 26 19 x 38 .018 .020 44.8 .032 ± .002 1.4 .91 55A6359-24-* 24 19 x 36 .023 .025 28.4 .037 ± .002 2.0 55A6359-22-* 22 19 x 34 .029 .031 17.5 .043 ± .002 2.9 55A6359-20-* 20 19 x 32 .037 .039 10.7 .051 ± .003 4.4 55A6359-18-* 18 19 x 30 .046 .050 6.8 .061 ± .003 6.7 55A6359-16-* 16 19 x 29 .052 .057 5.3 .069 ± .003 8.6 TABLE II. PERFORMANCE DETAILS BEND TESTING PART NUMBER 1/ MANDREL DIAMETER (inch) (± 3%) WEIGHT (lb) (± 3%) IMMERSION, LIFE CYCLE AND ACCELERATED AGING COLD BEND IMMERSION, LIFE CYCLE AND ACCELERATED AGING COLD BEND 55A6359-28-* .250 .375 .125 .500 55A6359-26-* .375 .500 .125 55A6359-24-* .375 .500 .250 1.00 55A6359-22-* .500 .750 .375 1.00 55A6359-20-* .500 .750 .500 1.00 55A6359-18-* .500 1.00 .500 1.00 55A6359-16-* .750 1.00 .750 1.00 .500 WIRE RATINGS AND ADDITIONAL REQUIREMENTS INSULATION ELONGATION: 125% (minimum), AWG 28 150% (minimum), AWG 26-16 1/ PART NUMBER: The "*" in the part numbers above shall be replaced by a color code designator. Example: AWG 24, white: 55A6359-24-9 AWG 24, white with a black stripe: 55A6359-24-90 Except as specified above, this construction shall meet all the requirements of Raychem Specification Sheet 55A0114 for AWG sizes 28-16. Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE Connectivity, and TE connectivity (logo) are trademarks. Page 1 of 1 DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL. THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Raychem Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-522-6752 Fax: 1-650-361-6297 © 2005-2017 TE Connectivity Ltd. family of companies. All Rights Reserved.