55K9082-24-2/6

55K9082 Issue 6 15th December 2009 Specification Control Drawing Page 1 of 1 TWO CONDUCTOR CABLE, MODIFIED FLUOROPOLYMER INSULATED, 600 VOLT, 180°C, CONTROLLED WEIGHT The complete requirements for procuring the wire described herein shall consist of this document and Airbus Industrie Specification ABS0821 Issue 5 Component wire 55K9081 C6 C7 Part Description Wire Size 55K9082-24-*/* 55K9082-22-*/* 55K9082-20-*/* 55K9082-18-*/* 24 22 20 18 C14 Resistance @ 20°C max. ohms/km 117.42 61.80 34.20 21.73 C15 C13 Finished Cable Outside Diameter mm Lower Upper Spec Target Spec Limit Limit 1.94 2.04 2.14 2.23 2.33 2.43 2.70 2.80 2.90 3.20 3.30 3.40 C17 C16 Weight kg/km Upper Target Spec Limit 5.91 6.43 8.16 8.84 13.45 14.46 20.24 22.15 COLOUR CODE: Cores - Red/Blue PERFORMANCE REQUIREMENTS: To be tested to the issue in effect of WSD 840 and meet the requirements of ABS0821 Issue 5. MARKING: Each core, every 300 ± 50mm horizontally along axis for sizes 18 & 20 and vertically along axis for sizes 24 & 22. Marking shall be black. Each mark shall be connected by a dashed line, each dash at 40-50mm, 5mm long, 0.5mm minimum width. - - - PHXX U GBSYY - - - Where the XX is replaced by the wire size and the YY is replaced by a year code designator in accordance with the table below. e.g. - - - PH24 U GBS09 - - - APPROVAL: Electronic sign off - no signatures will appear. ©2009 Tyco Electronics Corporation. All International Rights Reserved.