55PC0811-10-9

SCD SPECIFICATION CONTROL DRAWING Title WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED, NORMAL WEIGHT, GENERAL PURPOSE, 600 VOLT This specification sheet forms a part of the latest issue of Raychem Specification 55PC. CONDUCTOR - TIN-COATED COPPER 55PC0811 Date Revision 6-21-17 G INSULATION - RADIATION-CROSSLINKED, MODIFIED ETFE CONSTRUCTION DETAILS WIRE SIZE (AWG) CONDUCTOR STRANDING (number x AWG) 55PC0811-26-* 26 55PC0811-24-* 24 55PC0811-22-* PART NUMBER 1/ FINISHED WIRE DIAMETER OF STRANDED CONDUCTOR (inch) MAXIMUM RESISTANCE AT 20°C UPPER LOWER SPEC LIMIT (ohms/1000 ft.) SPEC LIMIT LOWER SPEC LIMIT TARGET VALUE 19 x 38 .0175 .0183 .0191 41.3 19 x 36 .0225 .0233 .0241 26.2 22 19 x 34 .0285 .0293 .0301 16.2 55PC0811-20-* 20 19 x 32 .0365 .0375 .0385 55PC0811-18-* 18 19 x 30 .0452 .0464 .0476 55PC0811-16-* 16 19 x 29 .0514 .0527 55PC0811-14-* 14 19 x 27 .0644 55PC0811-12-* 12 37 x 28 55PC0811-10-* 10 37 x 26 55PC0811-8-* 8 55PC0811-6-* 55PC0811-4-* 55PC0811-2-* DIAMETER (inch) WEIGHT (lbs/1000 ft.) TARGET VALUE UPPER SPEC LIMIT TARGET VALUE .0366 .0385 .0404 1.55 1.70 .0416 .0435 .0454 2.18 2.34 .0476 .0495 .0514 3.12 3.30 9.88 .0561 .0580 .0599 4.64 4.85 6.23 .0659 .0680 .0701 6.94 7.27 .0538 4.81 .0737 .0760 .0783 8.80 9.17 .0659 .0674 3.06 .0896 .0920 .0944 13.50 13.99 .0825 .0845 .0865 2.02 .1076 .1105 .1134 20.45 21.08 .1050 .1070 .1090 1.26 .1290 .1330 .1370 31.73 32.78 133 x 29 .158 .163 .169 .701 .188 .196 .203 56.8 59.9 6 133 x 27 .198 .205 .212 .445 .233 .242 .251 4 133 x 25 .250 .260 .268 .280 .300 .311 .322 146. 154. 2 665 x 30 .320 .330 .340 .183 .370 .383 .397 227. 240. 55PC0811-0-* 0 1045 x 30 .395 .415 .425 .116 .449 .466 .483 343. 366. 55PC0811-00-* 00 1330 x 30 .440 .462 .475 .091 .505 .525 .545 450. 481. 55PC0811-000-* 000 1665 x 30 .515 .528 .540 .071 .568 .590 .612 559. 599. 55PC0811-0000-* 0000 2109 x 30 .565 .595 .605 .056 .646 .670 .694 684. 735. 89.7 UPPER SPEC LIMIT 94.7 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE Connectivity, and TE connectivity (logo) are trademarks. Page 1 of 2 DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL. THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Raychem Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-522-6752 Fax: 1-650-361-6297 © 2017 TE Connectivity Ltd. family of companies. All Rights Reserved. Page SPECIFICATION CONTROL DRAWING 2 of 2 Revision SCD G WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 150°C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level COLOR: White preferred CROSSLINKED VERIFICATION: 300 ± 3°C for 1 hour IDENTIFICATION AND COLOR STRIPING DURABILITY: 125 cycles (250 strokes) (minimum), 500 g weight INSULATION ELONGATION AND TENSILE STRENGTH: Total Insulation, Elongation, 50% (minimum) Tensile Strength, 5000 lbf/in2 (minimum) INSULATION FLAWS: Spark Test, 3.0 kV (rms) Impulse Dielectric Test, 8.0 kV (peak) INSULATION THICKNESS: .010 in. (nominal) total insulation SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 inch (maximum) in 12 inches VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms) 1/ PART NUMBER: The "*" in the part numbers on page 1 shall be replaced by a color code designator. Example: AWG 22, white: 55PC0811-22-9 AWG 22, white with a black stripe: 55PC0811-22-90 1/ See footer section on page 1 55PC0811