55PC1122-12-9/96-9

SPECIFICATION CONTROL DRAWING Title 55PC1122 SCD Date TWO CONDUCTOR CABLE, SHIELDED, JACKETED, GENERAL PURPOSE, 600 VOLT 6-11-21 Revision D This specification sheet forms a part of the latest issue of Raychem Specification 55PC. COMPONENT WIRES - 55PC0112 SHIELD - SILVER-COATED COPPER PART NUMBER 1/ CONDUCTOR SIZE (AWG) SHIELD SIZE (AWG) 55PC1122-26-* 55PC1122-24-* 55PC1122-22-* 55PC1122-20-* 55PC1122-18-* 55PC1122-16-* 55PC1122-14-* 55PC1122-12-* 55PC1122-10-* 55PC1122-8-* 55PC1122-6-* 26 24 22 20 18 16 14 12 10 8 6 38 38 38 38 38 38 38 38 36 36 34 JACKET - RADIATION-CROSSLINKED, MODIFIED ETFE CABLE CONSTRUCTION DETAILS JACKET THICKNESS OUTSIDE DIAMETER (inch) (inch) LOWER TARGET LOWER TARGET UPPER SPEC LIMIT WALL SPEC LIMIT VALUE SPEC LIMIT .0050 .0065 .088 .092 .096 .0050 .0065 .097 .101 .105 .0050 .0065 .109 .114 .119 .0055 .0070 .126 .130 .134 .0055 .0070 .145 .149 .154 .0055 .0070 .159 .164 .169 .0060 .0075 .189 .194 .199 .0060 .0080 .227 .233 .238 .0065 .0085 .280 .291 .302 .0070 .0090 .394 .415 .436 .0070 .0090 .486 .512 .538 WEIGHT (lbs/1000 ft.) TARGET UPPER VALUE SPEC LIMIT 6.86 7.22 8.55 8.91 11.10 11.60 14.95 15.44 20.40 21.03 24.81 25.54 35.52 36.41 51.71 52.88 81.65 85.95 147.76 152.88 229.27 236.76 CABLE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200°C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level CROSSLINKED VERIFICATION: 300 ± 3°C for 1 hour DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz JACKET COLOR: White preferred JACKET ELONGATION AND TENSILE STRENGTH: Elongation, 50% (minimum) Tensile Strength, 5000 lbf/in2 (minimum) JACKET FLAWS: Spark Test, 1000 volts (rms) Impulse Dielectric Test, 6.0 kV (peak) SHIELD COVERAGE: 85% (minimum) VOLTAGE WITHSTAND (Post Environmental): 1000 volts (rms), 60 Hz, 1 minute 1/ PART NUMBER: The "*" in the part numbers above shall be replaced by color code designators with a slash separating the component wire colors and a dash separating the component wire colors from the jacket color. Example: AWG 22, red and blue component wires; white jacket: 55PC1122-22-2/6-9 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER, AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: "901/902..." MAY BE REPLACED BY "Axxx".) OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Page 1 of 1 DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL. THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Raychem Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-227-8816 © 2013-2021 TE Connectivity Ltd. family of companies. All Rights Reserved.