General Hand Tool Types
Revised:
July 2008
CERTI-CRIMP II SAHT
Standard Straight Action Hand Tool Design
Widely used in the Aircraft and Military industries
Image representative of type only
Features:
Fixed dies
Straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Emergency only ratchet release
Terminal/wire positioning aids & Ins. adjustment on most tools
Ergonomic non-slip handles
Approximate weight 0.59 kg (1.3 lbs)
Part Number
91572-1
91576-1
91595-1
91558-1
91559-1
91503-1
Description
AMP CT 2.0 Receptacle
AMP DYNAMIC D-2
AMP DYNAMIC D-2
AMP DYNAMIC D-3
AMP DYNAMIC D-3
AMPLIMITE HD-20
91513-1
AMPLIMITE HD-20
91548-1
AMPLIMITE HD-20
91549-1
AMPLIMITE HD-20
91520-1
AMPLIMITE HD-22
91537-1
91516-1
91517-1
AMPMODU II FFC
AMPMODU IV
AMPMODU IV, V
91512-1
Commercial MATE-N-LOK
91501-1
Micro MATE-N-LOK
91502-1
Micro MATE-N-LOK
91522-1
Mini-Universal MATE-N-LOK
91529-1
Mini-Universal MATE-N-LOK
91536-1
Mini-Universal MATE-N-LOK "F" Ins. Crimp
91594-1
Mini-Universal MATE-N-LOK "O/L" Ins. Crimp
91577-1
91505-1
MULTILOCK 040
TYPE III+
mm² (AWG) or other
0.12 - 0.4 (26-22)
0.08 - 0.22 (28-24)
0.4 - 1.0 (22-18)
0.6 - 1.5 (20-16)
0.2 - 0.6 (24-20)
0.08 - 0.6 (28-20)
Ins. Ø0.76-1.52mm
0.4 - 1.0 (22-18)
No Ins. Crimp
0.08 - 0.6 (28-20)
No Ins. Crimp
0.08 - 0.22 (28-24)
Ins. Ø0.76-1.52mm
0.08 - 0.4 (28-22)
Ins. Ø0.76-1.27mm
0.15 - 0.4 (26-22)
0.05 - 0.6 (30-20)
0.15 - 0.4 (26-22)
Ins. Ø1.02-1.52mm
0.2 - 1.0 (24-18)
Ins. Ø1.52-2.54mm
0.2 - 0.6 (24-20)
Ins. Ø0.89-1.53mm
0.05 - 0.12 (30-26)
Ins. Ø0.89-1.53mm
0.4 - 1.0 (22-18)
Ins. Ø1.5-2.39mm
0.15 - 0.4 (26-22)
Ins. Ø1.19-1.75mm
0.5 - 1.42 (22-16)
Ins. Ø2.0-3.2mm
0.5 - 1.42 (22-16)
Ins. Ø2.0-3.2mm
0.4 - 0.6 (22-20)
0.2 - 1.42 (24-16)
Ins. Ø1.14-2.54mm
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 13
General Hand Tool Types
Revised:
July 2008
CERTI-CRIMP II SAHT - Short Handle
Ideal for working in confined spaces
Widely used in the Aircraft and Military industries
Image representative of type only
Features:
Fixed dies
Straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Emergency only ratchet release
Terminal/wire positioning aids & Ins. adjustment on most tools
Ergonomic non-slip handles
Approximate weight 0.5 kg (1.1 lbs)
Part Number
1901600-2
1901611-2
Description
PIDG STRATO-THERM Terminals & Splices
PIDG STRATO-THERM Terminals & Splices
mm² (AWG) or other
1.0 - 1.5 (18-16)
0.2 - 0.6 (24-20)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
CERTI-CRIMP II SAHT - Long Handle
Low handle force for ease of operation
Widely used in the Aircraft and Military industries
Image representative of type only
Features:
Fixed dies
Straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Emergency only ratchet release
Terminal/wire positioning aids & Ins. adjustment on most tools
Ergonomic non-slip handles
Approximate weight 0.59 kg (1.3 lbs)
Part Number
1901600-1
1901611-1
Description
PIDG STRATO-THERM Terminals & Splices
PIDG STRATO-THERM Terminals & Splices
mm² (AWG) or other
1.0 - 1.5 (18-16)
0.2 - 0.6 (24-20)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 14
General Hand Tool Types
Revised:
July 2008
CERTI-CRIMP II SAHT - Head Assy (Square)
Head only for use with Power Assist options
Image representative of type only
Features:
Fixed Dies
Straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Emergency only ratchet release
Terminal/wire positioning aids & Ins. adjustment on most tools
Use with:
1213805-[ ] Battery Tool Kit
1213860-[ ] Adapter, Electric Terminator
Part Number
1-1901600-2
1-1901611-1
Description
PIDG STRATO-THERM Terminals & Splices
PIDG STRATO-THERM Terminals & Splices
mm² (AWG) or other
1.0 - 1.5 (18-16)
0.2 - 0.6 (24-20)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
CERTI-CRIMP II SA Battery Tool Kit
Convert your existing Hand Tools into Powered!
1213805-2 - Kit only without Head
1213805-5 - Kit only without Head (GB Power Plug)
Image representative of type only
Features:
Heads can be removed from Hand Tools, or are also available as
a [-3] option.
Example 91500-1 CERTI-CRIMP II SAHT; handles can be
removed and the head used with this kit. Alternatively 91500-3
(head only) is also available.
Over 100 crimps per charge
Compact - only 360mm (14") long and weighs 1.57kg (3.48lbs)
The Tool Kit is supplied in a durable plastic carry case and
includes:
Battery Tool with the relevant CERTI-CRIMP II SAHT Adapter
Battery Charger 230 v
Two Batteries
for more information, please see the Power Assist section
Adapter - CERTI-CRIMP II to Electric Terminator
1213860-1 - Adapter only
Image representative of type only
Features:
For use with Electric Terminators (1673677-2 or 1490076-2) and
any CERTI-CRIMP II SAHT Head.
Heads can be removed from Hand Tools, or are also available as
a [-3] option.
Example 91500-1 CERTI-CRIMP II SAHT; the head can be
removed from the handles and used along with this adapter on
the Electric Terminator . Alternatively 91500-3 (head only) is also
available.
Page 15
General Hand Tool Types
Revised:
July 2008
Double Action Hand Tool
Note: The approvals shown against the tools listed are only applicable when using
terminals and wires recommended for the relevant industry.
Widely used in Aircraft and Military applications
Image representative of type only
Features:
Fixed dies
Ratchet mechanism ensures complete crimp cycle
Emergency only ratchet release
Terminal/wire positioning aids & Ins. adjustment on many tools
Ergonomic non-slip handles
Approximate weight 0.54 kg (1.2 lbs)
Part Number
45216
90009-8
90035-3
482930-1
46121
47386
47386-5
47387
525690
525691
47386-4
47387-7
46447
49592
49935
69363
525693
46673
46673-1
Description
PIDG Closed End Splice
Special GB Railways PIDG FASTON Tool
Qualifications: LUL RSE 024 pt6 & EE6161
Special GB Railways PIDG FASTON Tool
Qualifications: LUL RSE 024 pt6 & EE6161
Special French tool for PIDG FASTON 2.8 (.110) with crimp orientation at 90°
Marks the applied product with a one dot indent code.
Standard Tool for PIDG Terminals & Splices; PLASTI-GRIP Butt Splices
Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161
Marks the applied product with a one dot indent code
Standard Tool for PIDG & PLASTI-GRIP Terminals and PIDG Splices - GB Railways
Qualifications: Mil-T-7928/7; LUL RSE 024 pt6 & EE6161
Marks the applied product with a one dot indent code.
French PIDG & PLASTI-GRIP Ring Tongue Tool - includes French Instuction Sheet
Meets Mil-T-7928 - AMP specified level
Marks the applied product with a one dot indent code.
Standard Tool for PIDG & PLASTI-GRIP Terminals and Splices - GB Railways
Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161
Marks the applied product with a two dot indent code.
Special GB Aerospace PIDG & PLASTI-GRIP Ring Tongue Tool.
Equivalent to 47386 but has special retaining pins/rings to reduce the risk of tool
parts falling off whilst building and maintaining aircraft.
Special GB Aerospace PIDG & PLASTI-GRIP Ring Tongue Tool.
Equivalent to 47387 but has special retaining pins/rings to reduce the risk of tool
parts falling off whilst building and maintaining aircraft.
GB Special for PIDG & PLASTI-GRIP Ring Tongue's & FASTON's
Meets Mil-T-7928 - AMP specified level for Ringtongues only
Marks the applied product with a one dot indent code.
GB Special for PIDG & PLASTI-GRIP Ring Tongue's and FASTON's:
Meets Mil-T-7928 - AMP specified level for Ring Tongues only
Marks the applied product with a two dot indent code.
SOLISTRAND High Temp Terminals and Splices
Standard Tool for SOLISTRAND Terminals & Splices
Qualifications: Mil-T-7928
Standard Tool for SOLISTRAND Terminals and Splices
Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161
Standard tool for SOLISTRAND Terminals & Splices
Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161
Special tool for SOLISTRAND Terminals & Splices (GB)
Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161
Equivalent to 49935 but has special retaining pins/rings to reduce the risk of tool
parts falling off whilst building and maintaining aircraft.
STRATO-THERM Uninsulated Terminals & Splices
STRATO-THERM Uninsulated Terminals & Splices without Insulation Support
mm² (AWG) or other
1.0 - 1.5 (18-16)
1.5 - 2.5 (16-14)
0.4 - 1.0 (22-18)
0.15 - 0.4 (26-22)
0.15 - 0.4 (26-22)
0.4 - 1.5 (22-16)
Ins. Ø3.18mm max
0.4 - 1.5 (22-16)
1.25 - 2.0 (16-14)
0.6 - 1.5 (20-16) HD
Ins. Ø3.8mm1 max
0.6 - 1.0 (20-18)
1.5 - 2.5 (16-14)
0.4 - 1.5 (22-16)
1.5 - 2.5 (16-14)
0.6 - 1.5 (20-16) HD
0.4 - 6.0 (22-10)
2.5 - 4.0 (14-12)
0.4 - 6.0 (22-10)
0.15 - 0.6 (26-20)
0.4 - 6.0 (22-10)
0.4 - 1.5 (22-16)
0.4 - 1.5 (22-16)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 16
General Hand Tool Types
Revised:
July 2008
Double Action Hand Tool Battery Tool Kit
Convert your existing Hand Tools into Powered!
1213804-2 - Kit only without Head
1213804-5 - Kit only without Head (GB Power Plug)
Image representative of type only
Features:
Example 47386 DAHT; handles can be removed and the head
used with this kit.
Over 100 crimps per charge
Compact - only 360mm (14") long and weighs 1.57kg (3.48lbs)
The Tool Kit is supplied in a durable plastic carry case and
includes:
Battery Tool with the relevant DAHT Adapter
Battery Charger 230 v
Two Batteries
for more information, please see the Power Assist section
Adapter - Double Action Hand Tool to 626 Pneumatic
1213563-1 - Adapter only
Image representative of type only
Features:
Heads can be removed from Hand Tools, example:
the Handles from 47386 can be removed and the head used with
this Adapter (includes cam).
Also required:
Hand held power unit 189721-1
or
Foot actuated Power Unit 189722-1
for more information, please see the Power Assist section
.
Page 17
General Hand Tool Types
Revised:
July 2008
C-Head SAHT
69710-1 - Base Tool without Die-set
Widely used in Aircraft and Military applications
Can be used with all C-Head SAHT Dies
Image representative of type only
Features:
Interchangeable Dies
Straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Emergency only ratchet release
Approximate weight 0.86 kg (1.9 lbs)
C-Head SAHT - LD
1901260-1 Base Tool without Die-set
A light duty alternative to 69710-1
Can be used with all C-Head SAHT Dies EXCEPT:
- Die-set - C-Head SAHT - HD
- Through Splice applicatons
Features:
Interchangeable Dies
Straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Emergency only ratchet release
Ergonomic non-slip handles
Approximate weight 0.5 kg (1.1 lbs)
Page 18
Image representative of type only
General Hand Tool Types
Revised:
July 2008
Die-set - C-Head SAHT
A range of Die-sets for many premium crimp applications
Image representative of type only
Features:
Use in:
Hand Tool Frame 69710-1
Hand Tool Frame 1901260-1 (see restrictions)
Battery Tool Kits:
Open Head 1213840-[ ]
Closed Head 1213819-[ ]
Adapters for C-Head Dies:
Electric Terminator 1901556-1
Press SSC- 2FP 8-1481221-3
Part Number
58212-1
576711
576714
576715
576720
47807-1
47806-2
1-539634-9
Description
AMPLIMITE
PIDG STRATO-THERM Terminals & Splices
PIDG STRATO-THERM
PIDG STRATO-THERM
PIDG STRATO-THERM
PIDG, PLASTI-GRIP Terminals & Splices
PIDG, PLASTI-GRIP, Terminals & Splices
Pin 50 ohm, size 8 kit
mm² (AWG) or other
RG 142, 142A, 142B
0.2 - 0.4 (24-22)
1.5 (16)
1.0 (18)
0.5 (22)
1.5 - 2.5 (16-14)
0.4 - 1.5 (22-16)
Gore Cable Type:
GSC-03-81748-00
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Die-set - C-Head SAHT - HD
A range of Heavy Duty Die-sets for many premium crimp applications
Image representative of type only
Features:
Use in:
Hand Tool Frame 69710-1
Adapters for C-Head Dies:
Electric Terminator 1901556-1
Press SSC- 2FP 8-1481221-3
Part Number
59993-1
576716
576723
576742
69735
47808-6
90140-1
90145-1
58380-1
58380-2
Description
AMPLIMITE
PIDG STRATO-THERM Terminals & Splices
PIDG STRATO-THERM Terminals & Splices
PIDG STRATO-THERM Terminals & Splices
PIDG STRATO-THERM Terminals & Splices
PIDG, PLASTI-GRIP Terminals & Splices
TYPE XII Contact
TYPE XII Contact
Universal MATE-N-LOK
Universal MATE-N-LOK
mm² (AWG) or other
8 (10)
2.5 (14)
6.0 (10)
4.0 (12)
4.0 - 6.0 (12-10)
4.0 - 6.0 (12-10)
6.0 - 10.0 (10-8)
2.5 - 4.0 (14-12)
3.0 (12)
5.0 (10)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 19
General Hand Tool Types
Revised:
July 2008
C-Head SAHT Battery Tool Kit
1213819-2 - CLOSED head
1213819-5 - CLOSED head (GB Power Plug)
1213840-2 - OPEN head
1213840-5 - OPEN head (GB Power Plug)
Image representative of type only
Features:
Over 100 crimps per charge
Compact - only 360mm (14") long and weighs 1.57kg (3.48lbs)
The Tool Kit is supplied in a durable plastic carry case and
includes:
Battery Tool with the relevant C-Head SAHT Adapter
Battery Charger 230 v
Two Batteries
for more information, please see the Power Assist section
Adapter - C-Head SAHT to Bench Press SSC-2FP
8-1481221-3 - Adapter only
Image representative of type only
Features:
Adapts Bench Top Press SSC- 2FP (1481004-7 pictured) to take
C-Head SAHT Dies
for more information on the Press and Press options, please see
the Power Assist section
Adapter - C-Head SAHT to Electric Terminator
1901556-1 - Adapter only
Image representative of type only
Features:
Adapts the Electric Terminator to take C-Head SAHT Dies
for more information on the Press and Press options, please see
the Power Assist section
Page 20
General Hand Tool Types
Revised:
July 2008
Heavy Head Hand Tool
Note: The specifications shown against the tools listed are only applicable when
using terminals recommended for the relevant industry
Widely used in Aircraft and Military applications
Image representative of type only
Features:
Fixed dies
Straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Emergency only ratchet release
Terminal/wire positioning aids & Ins. adjustment on most tools
Approximate weight 0.95 kg (2.1 lbs)
Part Number
234170-1
234171-1
1366044-1
Description
AMP DYNAMIC D-5
AMP DYNAMIC D-5
AMP DYNAMIC D-5 Receptacle
90246-1
90276-2
Standard tool for PIDG FASTON
Special GB Railways PIDG FASTON Tool
Qualifications: LUL RSE 024 pt6 & EE6161
PIDG STRATO-THERM Terminals & Splices
Special GB Aerospace tool for thin-wall PIDG STRATO-THERM Terminals & Splices
Qualified to BS 4G178
Special GB Aerospace tool for thin-wall PIDG STRATO-THERM Terminals & Splices
Qualified to BS 4G178
Special GB Aerospace tool for thin-wall PIDG STRATO-THERM Terminals & Splices
with PTFE or PEEK thin-wall Insulation
Qualified to BS 4G178
Special GB Aerospace tool for thin-wall PIDG STRATO-THERM Terminals & Splices
Qualified to BS 4G178
Special GB Aerospace tool for thin-wall PIDG STRATO-THERM Terminals & Splices
Qualified to BS 4G178
Special GB Aerospace tool for thin-wall PIDG STRATO-THERM Terminals & Splices
Qualified to BS 4G178
Special GB Aerospace tool for thin-wall PIDG STRATO-THERM Terminals & Splices
Qualified to BS 4G178
PIDG, PLASTI-GRIP Large Expansion Terminals & Splices
484364-1
576782
576783
576784
576778
576779
576780
576781
59287-2
525692
69322-1
69355
59461
Special GB Aerospace PIDG & PLASTI-GRIP Ring Tongue Tool.
Equivalent to 59239-4 but has special retaining pins/rings to reduce the risk of tool
parts falling off whilst building and maintaining aircraft.
Standard Tool for PIDG & PLASTI-GRIP Terminals and Splices - GB Railways
Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161
Marks the applied product with a one dot indent code.
SOLISTRAND High Temp Parallel Splice
SOLISTRAND Terminals & Splices
STRATO-THERM Uninsulated Terminals & Splices with Insulation Support
90382-2
90384-1
TYPE XII Contact
TYPE XII Contact
59239-4
mm² (AWG) or other
1.5 - 2.5 (16-14)
4.0 - 6.0 (12-10)
8.0 (10)
Ins. Ø4.9-7.8mm
2.5 - 4.0 (14-12)
4.0 - 6.0 (12-10)
1.0 (18)
2.5 (14)
4.0 (12)
6.0 (10)
0.2 - 0.4 (24-22)
0.5 (22)
1.0 (18)
1.5 (16)
4.0 - 6.0 (12-10)
(16-14) HD
4.0 - 6.0 (12-10)
3.0 - 5.0 (12-10)
1.5 - 2.5 (16-14) HD
Ins. Ø5.84mm max
0.4 - 6.0 (22-10)
10.0 (8)
4.0 - 6.0 (12-10)
(16-14) HD
1.5 - 4.0 (16-12)
6.0 - 10.0 (10-8)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 21
General Hand Tool Types
Revised:
July 2008
Heavy Head Hand Tool Battery Tool Kit
Convert your existing Hand Tools into Powered!
1901235-2 - Kit only without head
1901235-5 - Kit only without head (GB Power Plug)
Image representative of type only
Features:
Heads can be removed from many Heavy Head Hand Tools,
example:
the Handles from 59239-4 can be removed and the head used
with this kit.
See Instruction sheet 409-10068 for a list of compatible tools
Over 100 crimps per charge
Compact - only 360mm (14") long and weighs 1.57kg (3.48lbs)
The Tool Kit is supplied in a durable plastic carry case and
includes:
Battery Tool with Heavy Head Adapter
Battery Charger 230 v
Two Batteries
for more information, please see the Power Assist section
Adapter - Heavy Head to 626 Pneumatic
525432-1 - Adapter only
Image representative of type only
Features:
Heads can be removed from Hand Tools, example:
the Handles from 59239-4 can be removed and the head used
with this Adapter on the 626 Pneumatic system.
Also required:
Adapter Holder with Ratchet 356304-1
or Adapter Holder without Ratchet 189928-1
and
Hand held power unit 189721-1
or Foot actuated Power Unit 189722-1
Page 22
General Hand Tool Types
Revised:
July 2008
CERTI-LOK
169400 Base Tool without Die-set
Image representative of type only
Features:
Interchangeable Dies
Straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Easy access ratchet release
Handle pressure adjustment with locking device
Ergonomic non-slip handles
Approximate weight 0.64 kg (1.4 lbs)
Part Number
656075-1
169404
169409
Description
Complete tool for LOCKING CLIP
Die-set for PIDG, PLASTI-GRIP Terminals & Splices
Use in Hand Tool Frame 169400
GB Railways PIDG & PLASTI-GRIP Tool (Signal only)
Meets; Mil-T 7928 F, VG 88720, DIN 41611
Die-set for SOLISTRAND Terminals & Splices
Use in Hand Tool Frame 169400
mm² (AWG) or other
0.03 - 0.56 (32-20)
0.6 - 6.0 (20-10)
0.4 - 6.0 (22-10)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Adapter - CERTI-LOK to Electric Terminator
169411 - Adapter only
Image representative of type only
Features:
Adapts the Electric Terminator to take CERTI-LOK Dies
for more information on the Press and Press options, please see
the Power Assist section
Page 23
General Hand Tool Types
Revised:
July 2008
Reel-Fed CERTI-LOK
A unique tool that applies terminals from special small reels
Image representative of type only
Features:
Terminal feeding and cutting device
Straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Easy access ratchet release
Handle pressure adjustment with locking device
Egonomic non-slip handles
Part Number
169424-1
Description
AMPLIMITE HD-20
734643-1
734203-1
734204-1
734870-1
734870-2
539608-1
734216-1
AMPLIVAR
AMPMODU IV
AMPMODU IV
MICRO MATCH COSI contact
MICRO MATCH COSI contact
MODU II
TYPE III+
mm² (AWG) or other
0.08 - 0.56 (28-20)
Ins. Ø0.76-1.52mm
0.12 - 0.14 (26)
0.2 -0.56 (24-20)
0.2 - 0.6 (24-20)
0.08 - 0.2 (28-24)
0.02 - 0.20 (32-24)
0.2 - 1.5 (24-16)
Ins. Ø1.1-2.5mm
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
PEZ 100
539717-1 - Base Tool without Die-set
1579000-1 - Base Tool without Die-set Long Handles
Image representative of type only
Features:
Interchangeable Dies
Flap type terminal locator
Straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Easy access ratchet release
Handle pressure adjustment with locking device
Egonomic non-slip handles
Part Number
1579002-6
1579002-7
7-1579001-2
7-1579001-3
7-1579001-4
Description
PIDG STRATO-THERM
PIDG STRATO-THERM
POSITIVE-LOK
POSITIVE-LOK
Die-set for Ring Tongue (similar to DIN 46225)
mm² (AWG) or other
0.2 - 0.4 (24-22)
1.0 - 2.5 (18-14)
0.35 - 0.75 (24-18)
0.5 - 0.75 (22-20)
1.0 - 2.5 (18-14)
Ins. Ø2.1-3.1mm
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 24
General Hand Tool Types
Revised:
July 2008
ERGOCRIMP
539635-1 Base Tool without Die-set
Image representative of type only
Note: This tool is not compatible with SDE Dies
Features:
Interchangeable Dies
Virtually a straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Easy access ratchet release
Handle pressure adjustment with locking device
Egonomic non-slip handles
Approximate weight 0.59 kg (1.3 lbs)
Spare parts Kit 539635-2 (excluding main spring)
Main Spring PN 1579005-1
Part Number
9-1579004-6
Description
MCON 2.8 Receptacle
9-1579004-8
MCON 2.8 Receptacle
9-1579004-9
MCON 2.8 Receptacle
mm² (AWG) or other
0.2 - 0.35 (24-22)
Ins. Ø1.15-1.4mm
1.5 - 2.5 (16-14)
Ins. Ø2.2-3.0mm
4.0 (12)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Die-set - ERGOCRIMP
Widely used in the Automotive industry
Image representative of type only
Features:
Use in:
Hand Tool Frame 539635-1
1285003-1 - Head for the 626 Pneumatic System
1579000-7 - Adapter for Bench Top Press SSC- 2FP (1481004-7)
for more information please see the Power Assist section
Part Number
4-1579001-1
4-1579001-2
4-1579001-3
4-1579001-4
4-1579001-5
4-1579001-6
4-1579001-7
4-1579001-8
539950-2
539691-2
6-1579001-6
6-1579001-7
539662-2
Description
AMP MCP 1.2-LL
AMP MCP 1.2-LL
AMP MCP 1.2-LL
AMP MCP 1.2-LL
AMP MCP 1.2-LL (SWS)
AMP MCP 1.2-LL (SWS)
AMP MCP 1.2-LL (SWS)
AMP MCP 1.2-LL (SWS)
AMP MCP 1.5k; AMP MCP 1.5k (SWS)
PIDG, PLASTI-GRIP - All Types
SOLARLOK
SOLARLOK
SOLISTRAND Terminals & Splices
mm² (AWG) or other
1.0 - 1.5 (18-16)
0.5 - 0.75 (22-20)
0.25 - 0.35 (24-22)
0.14 - 0.22 (26-24)
1.0 - 1.5 (18-16)
0.75 - 1.0 (20-16)
0.2 - 0.35 (24-22)
0.14 - 0.22 (26-24)
0.2 - 1.0 (24-18)
0.4 - 6.0 (22-10)
1.5 - 6.0 (16-10)
4.0 - 6.0 (12-10)
0.3 - 6.6 (24-10)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 25
General Hand Tool Types
Revised:
July 2008
Tetra-Crimp Hand Tool
58078-3 - Base Tool without Die-set
Image representative of type only
Features:
Interchangeable Dies
Ratchet mechanism ensures complete crimp cycle
Tamper proof ratchet release setting
Emergency ratchet release feature
Terminal loactor / support and wire stop on many tools
Approximate weight 0.64 kg (1.4 lbs)
Egonomic non-slip handles
Part Number
59824-1
58052-3
90390-3
90391-3
58079-3
58080-3
Description
Complete Tool for PIDG, PLASTI-GRIP Terminals & Splices
Meets UL requirements
Die-set for ULTRA FAST
Use In Hand Tool Frame 58078-3
Die-set for ULTRA FAST (including Flag Terminals)
Use In Hand Tool Frame 58078-3
Die-set for ULTRA FAST (including Flag Terminals)
Use In Hand Tool Frame 58078-3
Die-set for ULTRA FAST PLUS
Use In Hand Tool Frame 58078-3
Die-set for ULTRA FAST PLUS
Use In Hand Tool Frame 58078-3
mm² (AWG) or other
0.4 - 6.0 (22-10)
0.15 - 0.4 (26-22)
0.4 - 1.0 (22-18)
1.5 - 2.5 (16-14)
0.4 - 1.0 (22-18)
1.5 - 2.5 (16-14)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 26
General Hand Tool Types
Revised:
July 2008
Mini CERTI-LOK
A light weight and compact tool for many commercial applications
Image representative of type only
Features:
Fixed dies
Straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Easy access ratchet release
Handle pressure adjustment with locking device
Easy terminal positioning with 'Flap Locator' (some tools)
Egonomic non-slip handles
Approximate weight 0.46 kg (1.0 lbs)
Part Number
1579004-2
169341-1
169480-1
169475-1
169422-1
Description
110 FASTIN-ON
AMPLIMITE HD-20
(Spare Terminal Locator 4-539785-7)
AMPLIMITE HD-22
AMPMODU IV
(Spare Terminal Locator 4-539785-8)
Mini-Universal MATE-N-LOK
MODULAR PLUG
MODULAR PLUG
MODULAR PLUG
MODULAR PLUG
MQS Ø1.0mm
POSITIVE-LOK 4.8 mm
TANDEM-SPRING
(Spare Terminal Locator 4-539785-9)
TYPE 'F' Crimp-on Snap-in
TYPE III+
TYPE III+; Cl-2 Socket
1579004-4
Wire End Ferrules
734360-1
169481-1
734202-1
734218-1
734218-2
734218-3
734218-4
539645-1
169994-1
169481-2
mm² (AWG) or other
0.5 - 1.5 (22-16)
0.03 - 0.56 (32-20)
Ins. Ø0.5-1.5mm
0.08 - 0.4 (28-22)
0.03 - 0.56 (32-20)
Ins. Ø0.5-1.4mm
0.4 - 1.0 (22-18)
4 Posn
6 Posn
8 Posn
6 Posn off-set
0.35 - 0.5 (24-22)
0.2 - 0.6 (24-20)
0.03 - 0.56 (32-22)
0.05 - 1.5 (30-16)
0.03 - 0.56 (32-20)
0.75 - 2.5 (20-14)
Ins. Ø2.0-3.8mm
0.08 - 10.0 (28-8)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 27
General Hand Tool Types
Revised:
July 2008
Modular Mini CERTI-LOK
Based on the Mini Certi-Lok tool
2-1579005-1 Short handle assembly
2-1579005-2 Long handle assembly
Image representative of type only
Features:
Heads with identical features to the Mini Certilok tool
Choice of two handle lengths:
2-1579005-1 Short Handle
2-1579005-2 long Handle
Interchangerbility via snap-in pins.
Part Number
2-1579021-8
1579001-8
5-1579001-8
1579001-9
7-1579001-8
7-1579001-9
1-1579004-1
1-1579004-2
Description
Head only for 4.2mm PE Series
Head only for FFC to MQS
Complete tool for MQS (SWS)
Head only for Pin/Socket Ø2.5
Head only for SOLARLOK
Head only for SOLARLOK
Complete tool for SOLARLOK with Long Handle assembly
Complete tool for SOLARLOK with Long Handle assembly
mm² (AWG) or other
0.15 - 1.0 (26-18)
0.35 - 0.5 (24-22)
0.5 - 0.75 (22-20)
1.5 - 2.5 (16-14)
1.5 - 2.5 (16-14)
4.0 - 6.0 (12-10)
1.5 - 2.5 (16-14)
4.0 - 6.0 (12-10)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
C-Frame Hand Tool
6-1419172-9 - Base Tool without Die-set
Image representative of type only
Features:
Interchangeable Dies
Double action jaw closure
Ratchet mechanism ensures complete crimp cycle
Easy access ratchet release
Handle pressure adjustment with locking device
Egonomic non-slip handles
Approximate weight 0.55 kg (1.2 lbs)
Part Number
1583684-1
948761-2
Description
Die-set for ADK Series Back Shell
Use in Hand Tool frame 6-1419172-9
Die-set for ADK Series Back Shell
Use in Hand Tool frame 6-1419172-9
Die-set for ADK Series Back Shell
Use in Hand Tool frame 6-1419172-9
Die-set for ADK Series Back Shell
Use in Hand Tool frame 6-1419172-9
Complete tool for HDE 20 Ferrule
948761-1
948761-3
Complete tool for HDE20 Ferrule
Complete tool for HDE20 Ferrule
734566-1
Complete tool for N Series 50 & 70 ohm
1583684-2
1583684-3
1583684-4
mm² (AWG) or other
6.0 mm Cable Dia Max
7.5 mm Cable Dia Max
8.5 mm Cable Dia Max
9.5 mm Cable Dia Max
9-15-25 WAY
8.2MM I/D
9-15-25 WAY 6.25MM I/D
9-15-25 WAY
9.5MM I/D
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 28
General Hand Tool Types
Revised:
July 2008
D-Frame Tool
Image representative of type only
Features:
Fixed Die-sets
Small and lightweight
Ratchet mechanism ensures complete crimp cycle
Easy access ratchet release
Handle pressure adjustment with locking device
Egonomic non-slip handles
Approximate weight 0.55 kg (1.2 lbs)
Part Number
947488-1
947679-1
2-1579002-0
Description
Coax - BNC, TNC
HE 13 / 14 Crimp-on Snap-in
Wire Wire End Ferrrules (Square crimp form)
mm² (AWG) or other
Cable Dia 5 & 6mm
0.08 - 0.2 (28-24)
0.5 - 6.0 (22-10)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Trapezium Crimp Tool
Special Trapezium crimp tool for Wire End Ferrule applications
Image representative of type only
Features:
Ratchet mechanism ensures complete crimp cycle
Easy access ratchet release
Handle pressure adjustment with locking device
Egonomic non-slip handles
Part Number
734641-2
734641-3
734641-4
Description
Wire End Ferrules (trapezium crimp form)
Wire End Ferrules (trapezium crimp form)
Wire End Ferrules (trapezium crimp form)
mm² (AWG) or other
0.14 - 6.0 (26-10)
0.5 - 10 (22-6)
10.0 - 16.0 (8-6)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 29
General Hand Tool Types
Revised:
July 2008
Square Crimp Tool
Special Square crimp tool for Wire End Ferrule applications
Image representative of type only
Features:
Ratchet mechanism ensures complete crimp cycle
Easy access ratchet release
Handle pressure adjustment with locking device
Egonomic non-slip handles
Part Number
539660-1
539661-1
Description
Wire Wire End Ferrrules (square crimp form)
Wire Wire End Ferrrules (square crimp form)
mm² (AWG) or other
0.08 - 6.0 (28-10)
0.75 - 10 (20-8)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Service Tool
734790-1 - Base Tool without Die-set
Image representative of type only
Features:
Interchangeable Dies
Ratchet mechanism ensures complete crimp cycle
Easy access ratchet release
Handle pressure adjustment with locking device
Egonomic non-slip handles
Approximate weight 0.59 kg (1.3 lbs)
Part Number
1-1579004-5
2-1579021-3
734767-1
1-1579004-4
2-1579021-2
734768-1
1-1579004-6
2-1579021-4
734658-1
734658-2
790081-2
1-1579004-7
2-1579021-5
Description
Complete tool for FASTON; FASTIN-FASTON
Complete tool for FASTON; FASTIN-FASTON
Use in Hand Tool 734790-1
Micro TIMER I; Junior Power-TIMER 2.8 (SWS); Cl-2
Use in Hand Tool 734790-1
Complete tool for PIDG, PLASTI-GRIP - All Types
Die-set for PIDG, PLASTI-GRIP - RBY all types
Use in Hand Tool 734790-1
Pin / Socket Ø1.5 (SWS)
Use in Hand Tool 734790-1
Complete tool for SOLISTRAND Terminals & Splices
Die-set for SOLISTRAND Terminals & Splices
Use in Hand Tool 734790-1
Complete Tool for Wire End Ferrules
Complete Tool for Wire End Ferrules
Complete Tool for Wire End Ferrrules
Complete Tool for Wire End Ferrules DIN 46228
Die-set for Wire End Ferrules DIN 46228
Use in Hand Tool 734790-1
mm² (AWG) or other
0.1 - 6.0 (18-10)
0.5 - 6.0 (22-10)
0.5 - 2.5 (22-14)
0.5 - 6.0 (22-10)
0.5 - 6.0 (22-10)
0.5 - 2.5 (22-14)
0.08 - 10.0 (28-8)
0.5 - 6.0 (22-10)
25.0 - 35.0 (4-2)
50 (1/0)
6.0 - 16.0 (10-6)
0.14 - 6.0 (26-10)
0.14 - 6.0 (26-10)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 30
General Hand Tool Types
Revised:
July 2008
TERMI-POINT Hand Tool
Image representative of type only
Features:
Pneumatic options (pictured)
Interchangeable Mandrels
Terminals fed from Reel
Part Number
655032-1
655136-3
1-69411-3
1-69411-4
1-69411-9
69526-2
69551-5
69551-6
69551-8
69551-9
69561
69561-1
69561-4
654182-1
871087-1
871087-2
871295-1
871295-2
871295-3
871295-4
871295-5
Description
Maxi TERMI-POINT
STD TERMI-POINT
Mandrel (red) for 69526-1 - Ins. Range Ø1.10 - 1.65 mm
Mandrel (orange) for 69526-1 - Ins. Range Ø1.14 - 1.65 mm
Mandrel (brown) for 69526-1 - Ins. Range Ø1.14 - 1.65 mm
Hand Tool without Mandrel
Mandrel (black) for 69526-1 - Ins. Range Ø1.14 - 1.65 mm
Mandrel (brown) for 69526-1 - Ins. Range Ø0.56 - 1.14 mm
Mandrel (orange) for 69526-1 - Ins. Range Ø0.87 - 1.23 mm
Mandrel (red) for 69526-1 - Ins. Range Ø0.74 - 1.23 mm
Mandrel (yellow) for 654182-1 - Ins. Range Ø1.17 - 1.65 mm
Mandrel (yellow) for 654182-1 - Ins. Range Ø1.68 - 2.16 mm
Mandrel (red) for 654182-1 - Ins. Range Ø1.17 - 1.65 mm
Hand Tool without Mandrel
Hand Tool (pneumatic) without Mandrel
Hand Tool (pneumatic) without Mandrel
Mandrel (yellow) for 871087-1 - Ins. Range Ø0.91 - 1.65 mm
Mandrel (red) for 871087-1 - Ins. Range Ø0.86 - 1.65 mm
Mandrel (orange) for 871087-2 - Ins. Range Ø0.91 - 1.65 mm
Mandrel (red) for 871087-2 - Ins. Range Ø0.86 - 1.65 mm
Mandrel (brown) for 871087-2 - Ins. Range Ø0.76 - 1.40 mm
mm² (AWG) or other
0.2 - 0.56 (24-20)
0.2 - 0.4 (24-22)
0.2 (24)
0.4 (22)
0.15 (26)
0.08 - 0.4 (28-22)
0.08 (28)
0.15 (26)
0.4 (22)
0.2 (24)
0.56 (22)
0.56 (22)
0.2 (24)
0.6 - 0.2 (20-24)
0.6 - 0.2 (20-24)
0.4 - 0.15 (22-26)
0.56 (22)
0.2 (24)
0.4 (22)
0.2 (24)
0.15 (26)
Only the most popular options are listed here, please use our online search by terminal PN to find the right tool for your application, and contact us
where information is unclear or missing - there may well be something available for your requirement.
Page 31
