High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
STEP-Z Interconnection System (Continued)
25.00 [.984] Plugs
Position T25
STEP-Z
Interconnection System
25.50 28.60
[1.004] [1.126]
Position A2
Position A1
A
Optional Pick-Up Cap
25.95 ± 0.25
[1.022 ± .010]
24.65 ± 0.12
[.970 ± .005]
Ø 0.76
Solder Balls
[.030]
0.55
Ref.
[.022]
Contacts In
These Rows Are
Tied Together
(Commoned)
2.00
[.079]
18.00 25.50
Ref.
[.709] [1.004]
9.00
[.354]
Ø 0.60–0.55
[.024–.022]
1.00 8x
[.039] 2 Plcs.
0.65
73x
[.026]
1.30 36x
[.051]
Stencil Connector Outline
Onto Board
C
B
A Ref.
Recommended PC Board Layout
A
Dimensions
B
C
200
38.20
1.504
31.85
1.254
15.93
.627
296
53.75
2.116
47.45
1.868
23.725
.934
No. of
Pos.*
Plating
SnPb
Pb-free
SnPb
Pb-free
Part Numbers
With Pick & Place Cap
2-1761614-5䢇
7-1761614-5
2-1761616-5䢇
7-1761616-5
* Signal contacts only, ground contacts not included.
Tray packaged Part Numbers shown. Contact Tyco Electronics Engineering for Tape and Reel
packaged versions.
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant;
䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
13
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Introduction
to the MICTOR Interconnection System
Page_Head (Continued)
(0.64 [.025] Centerline)
MICTOR
Interconnection System
Product Facts
■
76 dedicated signal lines
per linear inch
■
Surface mount family
designed for parallel and
right-angle board-to-board,
flex-to-board and cable-toboard configurations
■
0.64 [.025] centerline
contact spacing
■
Redundant interfaces on
mated contacts
■
Fifteen mated stack heights
available ranging from 6.60
[.260] to 31.90 [1.256]
■
Infrared and forced air
convection compatible
housing materials
■
Designed for 50-ohm
systems
■
Connector housings
polarized for correct mating
■
Built-in connector-to-board
retention feature
■
Connector can be separated
by peeling from one end to
the other
■
Various packaging styles
can be made available for
automated assembly
(tape and reel, tubes)
■
Recognized under the
Component Program of
Underwriter
Laboratories Inc.
File No. E28476
R
The MICTOR connector
family is based on the
microstrip concept of two
rows of signal contacts
divided by a center power
ground plane. MICTOR
connectors are motherboard and daughtercard
compatible and include
designs for cable-to-board
applications.
Various mated heights are
available for parallel boardto-board systems. Custom
stacking heights can be
provided. The MICTOR
connector family is available in 0.64 [.025] centerlines and in sizes ranging
from 38 signal positions to
266 positions (in increments
of 38 positions). There is a
discrete ground bus every
12.7 [.50] of the connector
length, which can be
assigned to either power or
ground in any combination.
Redundant interfaces on
every signal line provide
added reliability. Two plating
options are available to
meet the needs of various
applications.
The housing material is
a liquid crystal polymer,
compatible with infrared
and forced air convection
operations.
The connector system uses
the solid ground bus
between the rows of signals
to provide low crosstalk and
excellent high-speed signal
characteristics.
14
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Connector Cross Section
Compliant
SMT solder
lead design
Center ground bus for
improved signal integrity
and matched impedance
MICTOR
Interconnection System
Redundant
points of
contact for
high reliability
Connectors are shown at point where signal contact first touch each other.
Connectors are designed to be fully mated when the two “Z” datums meet.
Green
Red
Blue
Brown
=
=
=
=
Receptacle housing
Plug housing
Signal contacts
Ground bus contacts
15
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Page_Head
Material
and(Continued)
Performance Specifications, MICTOR Connectors
Material Specifications
Material
Housing — Liquid crystal polymer, black
Contacts — High reliability copper alloy
Ground Bus — Phosphor bronze
Finish (Gold Plating)
Contacts and Ground Bus — Duplex plated 0.00076 [.000030] min. gold in mating area, 0.00381 [.000150] min. tin-lead on
leads, with entire contact and ground bus underplated 0.00178 [.000070] min. nickel
Finish (Palladium-Nickel Plating)
Contacts and Ground Bus — Duplex plated 0.000013 [.000005] min. gold over 0.00076 [.000030] min. palladium-nickel in
mating area, 0.00381 [.000150] min. tin-lead on leads, with entire contact and ground bus underplated 0.00178 [.000070] min.
nickel
Finish (Lead-Free Plating)
MICTOR
Interconnection System
Contacts and Ground Bus — 0.00076 [.000030] min. gold on contact area, 0.00381-0.00635 [.000150-.000250] matte tin per
ASTM B 545 on leads, all over 0.00177-0.00445 [.000070-.000175] nickel.
Or
0.00013 [.000005] min. gold over, 0.00076 [.000030] min. palladium nickel on contact area, 0.00381-0.00635 [.000150-.000250]
matte tin per ASTM B 545 on leads, all over 0.00191-0.00445 [.000075-.000175] nickel.
Performance Specifications
Ratings
Voltage — 30 vac
Current — Signal; rated 1.0 Amps, fully derated 0.5 Amps
Ground; rated 11.5 Amps, fully derated 7.6 Amps
Temperature — -55°C to +125°C
Electrical Characteristics
Characteristic Impedance — 50±5 ohms at 1 ns
Termination Resistance — ∆R 10 milliohms max.; Specification 109-6-1
Insulation Resistance — 10,000 megohms min.; Specification 109-208-1
Dielectric Withstanding Voltage — 500 vac at sea level; Specification 109-29-1
Mechanical Characteristics
Solderability — Solderable area shall have a 95% min. solder coverage; Specification 109-11-1
Vibration (Random) — No discontinuities of 1 µs or longer duration; Specification 109-21-5
Physical Shock — No discontinuities of 1 µs or longer duration; Specification 109-26-1
Durability (Tested to) — Mate and unmate samples at a rate of 600 cycles max. per hour. 25 cycles, gold plating;
500 cycles, palladium-nickel plating; Specification 109-27
Contact Retention — 1 lb min.; Specification 109-30
Mating Force — 152 oz max. per 1/2 inch of connector (1 module). Each module equals 38 signal contacts and 1 ground bus;
Specification 109-42
Unmating Force — 19 oz min. per 1/2 inch of connector (1 module). Each module equals 38 signal contacts and 1 ground bus;
Specification 109-42
Environmental Characteristics
Thermal Shock — Subject mated samples to 5 cycles between -55°C and +125°C; Specification 109-22
Humidity - Temperature Cycling — Subject mated samples to 10 cycles between +25°C and +65°C at 95% RH;
Specification 109-23-3, Condition B
Temperature Cycling — Subject mated samples to 1024 cycles between -40°C and +60°C at 2 hours per cycle;
Specification 109-75-1
Temperature Life — Subject mated samples to temperature life at +118°C for 792 hours;
Specification 109-43
Mixed Flowing Gas — Subject mated samples to environmental class II for 14 days; Specification 109-85-2
16
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Stack Height Combinations
30 µ Gold and Palladium
Nickel Plated Vertical
Connectors
9.00 [.354] Plug
(Pages 21 and 22)
6.60 [.260] Plug
(Pages 19 and 20)
6.60
[.260]
Standard Receptacle
(Pages 36 and 37)
Standard Receptacle
(Pages 36 and 37)
9.00 [.354] Plug
(Pages 21 and 22)
Raised Receptacle
(Pages 38 and 39)
12.57
[.495]
11.00
[.430]
Standard Receptacle
(Pages 36 and 37)
Standard Receptacle
(Pages 36 and 37)
12.57 [.495] Plug
(Pages 25 and 26)
11.00 [.430] Plug
(Pages 23 and 24)
18.75 [.738] Plug
(Page 29)
Standard Receptacle
(Pages 36 and 37)
21.60
[.850]
20.00
[.785]
18.75
[.738]
18.00
[.709]
15.60
[.615]
Raised Receptacle
(Pages 38 and 39)
9.00
[.354]
MICTOR
Interconnection System
6.60 [.260] Plug
(Pages 19 and 20)
12.57 [.495] Plug
(Pages 25 and 26)
11.00 [.430] Plug
(Pages 23 and 24)
Raised Receptacle
(Pages 38 and 39)
Raised Receptacle
(Pages 38 and 39)
22.86 [.900] Plug*
(Pages 32 and 33)
17.96 [.707] Plug
(Pages 27 and 28)
18.75 [.738] Plug*
(Page 29)
20.00 [.785] Plug*
(Pages 30 and 31)
22.86 [.900] Plug
(Pages 32 and 33)
27.00
[1.062]
22.86
[.900]
Standard Receptacle
(Pages 36 and 37)
Raised Receptacle
(Pages 38 and 39)
27.80
[1.093]
Raised Receptacle
(Pages 38 and 39)
29.00
[1.143]
Raised Receptacle
(Pages 38 and 39)
31.90
[1.255]
Raised Receptacle
(Pages 38 and 39)
*This connector not available in Palladium Nickel.
17
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Page_Head
MICTOR
Right-Angle
(Continued) (Straddle Mount) Combinations
MICTOR
Interconnection System
30 µ Gold & Palladium
Nickel Connections
Vertical Receptacle with
Right-Angle Plug
Right-angle versions are
designed for paddlecard
type applications. It is highly
recommended that customers who are considering
right-angle applications
contact Tyco Electronics
Vertical Plug with
Right-Angle Receptacle
Engineering to review their
applications as the potential
for tolerancing issues
and/or issues of solder joint
integrity can be highly
application specific.
18
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs
6.60 [.260]
Stacking Height*
A
Related Product Data
± 0.20
[± .008]
+ 0.00
B –+ 0.05
.000
[ – .002 ]
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
5.28 ± 0.03
[.208 ± .001]
Position No. 1 Indicator
18 Spaces at
0.64 ± 0.20 [.025 ± .008]
= 11.43 ± 0.20 [.450 ± .008]
*6.60 [.260] stack height when
mated to vertical receptacle;
15.62 [.615] stack height when
mated to vertical receptacle
(extended height).
D Spaces at
12.70 ± 0.20
[.500 ± .008] = E
± 0.20
C
[± .008]
6.53 ± 0.28
[.257 ± .011]
Ground Bus
Standard Barbless
Ground Bus Leads
F
MICTOR
Interconnection System
6.38 ± 0.23
[.251 ± .009]
Housing
Contact
Ø 1.94
Ref.
[.077]
8.72
[.343]
Max.
0.43 ± 0.05
[.017 ± .002]
C Ref.
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Pad
6.35
[.250]
Position No. 2
3.53
[.139]
Ø 0.81 ± 0.05
[.032 ± .002]
0.64
[.025]
Hole
Orientation Hole
(See Note)
Position No. 1
R 0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
Recommended PC Board Layout
(Viewed from Connector Side)
Note: For standard applications, the orientation hole must be 2.39±0.05 [.094±.002]; For slip-fit applications,
the orientation hole must be 2.00±0.03 [.079±.001].
19
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Page_Head
MICTOR
Vertical
(Continued)
Plugs (Continued)
6.60 [.260]
Stacking Height (Continued)
No. of
Pos.
MICTOR
Interconnection System
38
76
114
152
190
228
266
A
B
Dimensions
C
D
E
25.40 22.81 11.43
.450
1.000 .898
38.10 31.70 24.13
1.500 1.248 .950
50.80 48.21 36.83
2.000 1.898 1.450
63.50 60.91 49.53
2.500 2.398 1.950
76.20 73.61 62.23
3.000 2.898 2.450
88.90 86.31 74.93
3.500 3.398 2.950
101.60 99.01 87.63
4.000 3.898 3.450
0
1
2
3
4
5
6
—
12.70
.500
25.40
1.000
38.10
1.500
50.80
2.000
63.50
2.500
76.20
3.000
F
1.35
2.72
2.64
1.35
2.72
2.64
1.35
2.72
2.64
1.35
2.72
2.64
1.35
2.72
2.64
1.35
2.72
2.64
1.35
2.72
2.64
1.35
2.72
2.64
1.35
2.72
2.64
1.35
2.72
2.64
1.35
2.72
2.64
1.35
2.72
2.64
1.35
2.72
2.64
1.35
2.72
2.64
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
[.053]
[.107]
[.104]
Part Numbers
Barbed G/B Leads
Barbless G/B Leads
T&R
T&R
Vacuum Caps
Vacuum Caps
Tube
Tube
With
Without
With
Without
767007-8䢇 767111-8䢇 767111-1䢇 767116-1䢇 767118-1䢇
767118-8䢇
.
—
.
—
.
—
.
—
.
767056-1䢇
—
767119-8䢇
—
.
—
.
—
. 767117-1䢇 767119-1䢇
5767007-8䢇 5767111-8䢇 5767111-1䢇 5767116-1䢇 5767118-1䢇 5767118-8䢇
.
—
.
—
.
—
.
—
.
—
5767056-1䢇
—
.
—
.
—
. 5767117-1䢇 5767119-1䢇 5767119-8䢇
767007-9䢇 767111-9䢇 767111-2䢇 767116-2䢇 767118-2䢇
767118-9䢇
—
.
—
.
—
.
—
.
—
.
767056-2䢇
767119-9䢇
—
.
—
.
—
. 767117-2䢇 767119-2䢇
5767007-9䢇 5767111-9⽧ 5767111-2⽧ 5767116-2䢇 5767118-2䢇 5767118-9䢇
5767056-2䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
. 5767117-2䢇 5767119-2䢇 5767119-9䢇
1-767007-0䢇 1-767111-0䢇 767111-3䢇 767116-3䢇 767118-3䢇 1-767118-0䢇
767056-3䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
. 767117-3䢇 767119-3䢇 1-767119-0䢇
1-5767007-0 1-5767111-0
5767111-3䢇 5767116-3䢇 5767118-3䢇 1-5767118-0䢇
5767056-3䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
. 5767117-3䢇 5767119-3䢇 1-5767119-0䢇
1-767007-1䢇 1-767111-1䢇 767111-4䢇 767116-4䢇 767118-4䢇 1-767118-1䢇
767056-4䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
. 767117-4䢇 767119-4䢇 1-767119-1䢇
1-5767007-1 1-5767111-1
5767111-4䢇 5767116-4䢇 5767118-4䢇 1-5767118-1䢇
5767056-4䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
. 5767117-4䢇 5767119-4䢇 1-5767119-1䢇
1-767007-2䢇 1-767111-2䢇 767111-5䢇 767116-5䢇 767118-5䢇 1-767118-2䢇
767056-5䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
. 767117-5䢇 767119-5䢇 1-767119-2䢇
1-5767007-2 1-5767111-2
5767111-5䢇 5767116-5䢇 5767118-5䢇 1-5767118-2䢇
5767056-5䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
. 5767117-5䢇 5767119-5䢇 1-5767119-2䢇
1-767007-3䢇
—
.
—
. 767116-6䢇
—
.
—
.
767056-6䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
. 767117-6䢇
1-5767007-3䢇
—
.
—
. 5767116-6䢇
—
.
—
.
5767056-6䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
. 5767117-6䢇
—
.
—
.
1-767007-4䢇
—
.
—
. 767116-7䢇
—
.
—
.
767056-7䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
. 767117-7䢇
—
.
—
.
—
.
—
. 5767116-7䢇
—
.
—
.
1-5767007-4䢇
5767056-7䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
.
—
. 5767117-7䢇
—
.
—
.
Platings
Solder
Tail Contact
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Notes: 1. Contact Product Engineering regarding options not present in this table.
2. T&R vacuum caps are placed on some connectors to allow them to be picked up with robotic placement equipment that uses vacuum pick-up
nozzles.
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant;
䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
20
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Page_Head
MICTOR
Vertical
(Continued)
Plugs (Continued)
9.00 [.354]
Stacking Height*
A
Related Product Data
± 0.20
[± .008]
+ 0.00
B –+ 0.05
.000
[ – .002 ]
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
5.28 ± 0.03
[.208 ± .001]
Position No. 1 Indicator
18 Spaces at
0.64 ± 0.20 [.025 ± .008]
= 11.43 ± 0.20 [.450 ± .008]
* 9.00 [.354] stack height when
mated to vertical receptacle;
18.00 [.709] stack height when
mated to vertical receptacle
(extended height).
D Spaces at
12.70 ± 0.20
[.500 ± .008] = E
± 0.20
C
[± .008]
8.86 ± 0.28
[.349 ± .011]
Ground Bus
MICTOR
Interconnection System
Housing
8.71 ± 0.20
[.343 ± .008]
Contact
Standard Ground
Bus Leads
F
8.33
[.328]
Max.
Ø 1.94
Ref.
[.077]
0.43 ± 0.05
[.017 ± .002]
C Ref.
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Pad
6.35
[.250]
Position No. 2
3.53
[.139]
Ø 0.81 ± 0.05
[.032 ± .002]
0.64
[.025]
Hole
Orientation Hole
(See Note)
Position No. 1
R 0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
Recommended PC Board Layout
(Viewed from Connector Side)
Note: For standard applications, the orientation hole must be 2.39±0.05 [.094±.002]; For slip-fit applications,
the orientation hole must be 2.00±0.03 [.079±.001].
21
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Page_Head
MICTOR
Vertical
(Continued)
Plugs (Continued)
9.00 [.354]
Stacking Height (Continued)
No. of
Pos.
A
B
38
25.40
1.000
22.81
.898
MICTOR
Interconnection System
76
114
152
190
228
266
38.10
1.500
50.80
2.000
63.50
2.500
76.20
3.000
88.90
3.500
101.60
4.000
31.70
1.248
48.21
1.898
60.91
2.398
73.61
2.898
86.31
3.398
99.01
3.898
Dimensions
C
D
11.43
.450
24.13
.950
36.83
1.450
49.53
1.950
62.23
2.450
74.93
2.950
87.63
3.450
0
1
2
3
4
5
6
E
—
12.70
.500
25.40
1.000
38.10
1.500
50.80
2.000
63.50
2.500
76.20
3.000
F
1.52
2.74
1.52
2.74
1.52
2.74
1.52
2.74
1.52
2.74
1.52
2.74
1.52
2.74
1.52
2.74
1.52
2.74
1.52
2.74
1.52
2.74
1.52
2.74
1.52
2.74
1.52
2.74
[.060]
[.108]
[.060]
[.108]
[.060]
[.108]
[.060]
[.108]
[.060]
[.108]
[.060]
[.108]
[.060]
[.108]
[.060]
[.108]
[.060]
[.108]
[.060]
[.108]
[.060]
[.108]
[.060]
[.108]
[.060]
[.108]
[.060]
[.108]
Platings
Solder
Contact
Tail
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Part Numbers
Barbed G/B Leads
Tube
767139-1䢇
767140-1䢇
5767139-1
5767140-1
767139-2䢇
767140-2䢇
5767139-2
5767140-2
767139-3䢇
767140-3䢇
5767139-3
5767140-3
767139-4䢇
767140-4䢇
5767139-4
5767140-4
767139-5䢇
767140-5䢇
5767139-5
5767140-5
767139-6䢇
767140-6䢇
5767139-6
5767140-6
767139-7䢇
767140-7䢇
5767139-7
5767140-7
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant;
䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
22
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Page_Head
MICTOR
Vertical
(Continued)
Plugs (Continued)
11.00 [.430]
Stacking Height*
A
Related Product Data
± 0.20
[± .008]
+ 0.00
B –+ 0.05
.000
[ – .002 ]
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
5.28 ± 0.03
[.208 ± .001]
Position No. 1 Indicator
18 Spaces at
0.64 ± 0.20 [.025 ± .008]
= 11.43 ± 0.20 [.450 ± .008]
* 11.00 [.430] stack height when
mated to vertical receptacle;
19.94 [.785] stack height when
mated to vertical receptacle
(extended height).
D Spaces at
12.70 ± 0.20
[.500 ± .008] = E
± 0.20
C
[± .008]
10.79 ± 0.28
[.425 ± .011]
Ground Bus
MICTOR
Interconnection System
Housing
10.64 ± 0.20
[.419 ± .008]
Contact
Standard Ground
Bus Leads
F
8.72
[.343]
Max.
Ø 1.94
Ref.
[.077]
0.43 ± 0.05
[.017 ± .002]
C Ref.
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Pad
6.35
[.250]
Position No. 2
3.53
[.139]
Ø 0.81 ± 0.05
[.032 ± .002]
0.64
[.025]
Hole
Orientation Hole
(See Note)
Position No. 1
R 0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
Recommended PC Board Layout
(Viewed from Connector Side)
Note: For standard applications, the orientation hole must be 2.39±0.05 [.094±.002]; For slip-fit applications,
the orientation hole must be 2.00±0.03 [.079±.001].
23
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Page_Head
MICTOR
Vertical
(Continued)
Plugs (Continued)
11.00 [.430]
Stacking Height (Continued)
No. of
Pos.
A
B
38
25.40
1.000
22.81
.898
MICTOR
Interconnection System
76
114
152
190
228
266
38.10
1.500
50.80
2.000
63.50
2.500
76.20
3.000
88.90
3.500
31.70
1.248
48.21
1.898
60.91
2.398
73.61
2.898
86.31
3.398
101.60 99.01
4.000 3.898
Dimensions
C
D
E
11.43
.450
24.13
.950
36.83
1.450
49.53
1.950
62.23
2.450
74.93
2.950
87.63
3.450
0
1
2
3
4
5
6
—
12.70
.500
25.40
1.000
38.10
1.500
50.80
2.000
63.50
2.500
76.20
3.000
F
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [(.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
Platings
Solder
Tail Contact
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Part Numbers
Barbed G/B Leads
Barbless G/B Leads
T&R
T&R
Vacuum Caps
Vacuum Caps
Tube
Tube
With
Without
With
767123-8䢇
767123-1䢇
—
—
767003-9䢇
—
—
—
767087-1䢇
—
5767003-9䢇
5767123-8䢇 5767123-1䢇
—
—
5767087-1䢇
—
—
—
—
—
1-767003-0䢇
767123-9䢇
767123-2䢇
—
—
—
—
767087-2䢇
—
5767123-9䢇 5767123-2䢇
—
—
1-5767003-0䢇
5767087-2䢇
—
—
—
—
1-767003-1䢇 1-767123-0䢇
767123-3䢇
1-767182-3䢇 1-767183-0䢇
—
—
—
—
767087-3䢇
1-5767003-1䢇 1-5767123-0䢇 5767123-3䢇 1-5767182-3䢇 1-5767183-0䢇
5767087-3䢇
—
—
—
—
—
—
—
767003-8䢇
—
—
—
—
—
767087-4䢇
—
—
—
—
5767003-8䢇
5767087-4䢇
—
—
—
—
1-767003-2䢇 1-767123-2䢇
767123-5䢇
—
—
—
—
—
—
767087-5䢇
1-5767003-2䢇 1-5767123-2䢇 5767123-5䢇
—
—
5767087-5䢇
—
—
—
—
1-767003-3䢇
—
—
—
—
—
—
—
—
767087-6䢇
1-5767003-3䢇
—
—
—
—
5767087-6䢇
—
—
—
—
1-767003-4䢇
—
—
—
—
—
—
—
—
767087-7䢇
1-5767003-4䢇
—
—
—
—
5767087-7䢇
—
—
—
—
Note: Contact Product Engineering regarding options not present in this table.
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant;
䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
24
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Page_Head
MICTOR
Vertical
(Continued)
Plugs (Continued)
12.57 [.495]
Stacking Height*
A
Related Product Data
± 0.20
[± .008]
+ 0.00
B –+ 0.05
.000
[ – .002 ]
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
5.28 ± 0.03
[.208 ± .001]
Position No. 1 Indicator
18 Spaces at
0.64 ± 0.20 [.025 ± .008]
= 11.43 ± 0.20 [.450 ± .008]
* 12.57 [.495] stack height when
mated to vertical receptacle;
21.59 [.850] stack height when
mated to vertical receptacle
(extended height).
D Spaces at
12.70 ± 0.20
[.500 ± .008] = E
± 0.20
C
[± .008]
12.45 ± 0.28
[.490 ± .011]
Ground Bus
12.29 ± 0.20
[.484 ± .008]
MICTOR
Interconnection System
Housing
Contact
Standard Ground
Bus Leads
F
8.72
[.343]
Max.
Ø 1.94
Ref.
[.077]
0.43 ± 0.05
[.017 ± .002]
C Ref.
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Pad
6.35
[.250]
Position No. 2
3.53
[.139]
Ø 0.81 ± 0.05
[.032 ± .002]
0.64
[.025]
Hole
Orientation Hole
(See Note)
Position No. 1
R 0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
Recommended PC Board Layout
(Viewed from Connector Side)
Note: For standard applications, the orientation hole must be 2.39±0.05 [.094±.002]; For slip-fit applications,
the orientation hole must be 2.00±0.03 [.079±.001].
25
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Page_Head
MICTOR
Vertical
(Continued)
Plugs (Continued)
12.57 [.495]
Stacking Height (Continued)
No. of
Pos.
38
MICTOR
Interconnection System
76
114
152
190
228
266
A
B
Dimensions
C
D
E
25.40 22.81 11.43
.450
1.000 .898
38.10 31.70 24.13
1.500 1.248 .950
50.80 48.21 36.83
2.000 1.898 1.450
63.50 60.91 49.53
2.500 2.398 1.950
76.20 73.61 62.23
3.000 2.898 2.450
88.90 86.31 74.93
3.500 3.398 2.950
101.60 99.01 87.63
4.000 3.898 3.450
0
1
2
3
4
5
6
—
12.70
.500
25.40
1.000
38.10
1.500
50.80
2.000
63.50
2.500
76.20
3.000
F
1.52
2.64
1.52
2.64
1.52
2.64
1.52
2.64
1.52
2.64
1.52
2.64
1.52
2.64
1.52
2.64
1.52
2.64
1.52
2.64
1.52
2.64
1.52
2.64
1.52
2.64
1.52
2.64
[.060]
[.104]
[.060]
[.104]
[.060]
[.104]
[.060]
[.104]
[.060]
[.104]
[.060]
[.104]
[.060]
[.104]
[.060]
[.104]
[.060]
[.104]
[.060]
[.104]
[.060]
[.104]
[.060]
[.104]
[.060]
[.104]
[.060]
[.104]
Part Numbers
Barbed G/B Leads
Barbless G/B Leads
T&R
T&R
Vacuum Caps
Vacuum Caps
Tube
Tube
With
Without
With
Without
767149-8䢇 767120-1䢇 767121-1䢇
767121-8䢇
767005-8䢇 767149-1䢇
.
—
. 767082-1䢇
.
—
.
767057-1䢇
—
—
5767005-8䢇 5767149-1䢇 5767149-8䢇 5767120-1䢇 5767121-1䢇 5767121-8䢇
5767057-1䢇
—
.
—
. 5767082-1䢇
—
.
—
.
767005-9䢇 767149-2䢇
767149-9䢇 767120-2䢇 767121-2䢇
767121-9䢇
.
—
. 767082-2䢇
.
—
.
767057-2䢇
—
—
5767005-9䢇 5767149-2䢇 5767149-9䢇 5767120-2䢇 5767121-2䢇 5767121-9䢇
5767057-2䢇
—
.
—
. 5767082-2䢇
—
.
—
.
1-767005-0䢇 767149-3䢇 1-767149-0䢇 767120-3䢇 767121-3䢇 1-767121-0䢇
—
.
—
. 767082-3䢇
—
.
—
.
767057-3䢇
1-5767005-0䢇 5767149-3䢇 1-5767149-0䢇 5767120-3䢇 5767121-3䢇 1-5767121-0䢇
5767057-3䢇
.
—
. 5767082-3䢇
.
—
.
—
—
1-767005-1䢇 767149-4䢇 1-767149-1䢇 767120-4䢇 767121-4䢇 1-767121-1䢇
—
.
—
. 767082-4䢇 767127-4䢇 1-767127-1䢇
767057-4䢇
1-5767005-1䢇 5767149-4䢇 1-5767149-1䢇 5767120-4䢇 5767121-4䢇 1-5767121-1䢇
5767057-4䢇
—
.
—
. 5767082-4䢇 5767127-4䢇 1-5767127-1䢇
1-767005-2䢇 767149-5䢇 1-767149-2䢇 767120-5䢇
—
.
—
.
—
.
—
. 767082-5䢇 767127-5䢇 1-767121-2䢇
767057-5䢇
1-5767005-2䢇 5767149-5䢇 1-5767149-2䢇 5767120-5䢇
—
.
—
.
5767057-5䢇
—
.
—
. 5767082-5䢇 5767127-5䢇 1-5767121-2䢇
1-767005-3䢇
—
.
—
. 767120-6䢇
—
.
—
.
—
.
—
. 767082-6䢇
—
.
—
.
767057-6䢇
1-5767005-3䢇
—
.
—
. 5767120-6䢇
—
.
—
.
5767057-6䢇
—
.
—
. 5767082-6䢇
—
.
—
.
1-767005-4䢇
—
.
—
. 767120-7䢇
—
.
—
.
—
. 1-767151-4䢇 767082-7䢇
—
.
—
.
767057-7䢇
1-5767005-4䢇
—
.
—
. 5767120-7䢇
—
.
—
.
5767057-7䢇
—
. 1-5767151-4䢇 5767082-7䢇
—
.
—
.
Platings
Solder
Tail Contact
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Note: Contact Product Engineering regarding options not present in this table.
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant;
䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
26
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Page_Head
MICTOR
Vertical
(Continued)
Plugs (Continued)
17.96 [.707]
Stacking Height*
A
Related Product Data
± 0.20
[± .008]
+ 0.00
5.28 ± 0.03
[.208 ± .001]
B –+ 0.05
.000
[ – .002 ]
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
8.13
[.320]
18 Spaces at
0.64 ± 0.15 [.025 ± .006]
= 11.43 ± 0.15 [.450 ± .006]
* 17.96 [.707] stack height when
mated to vertical receptacle;
27.00 [1.062] stack height when
mated to vertical receptacle
(extended height).
C
Position No. 1 Indicator
D Spaces at
12.70 ± 0.15
[.500 ± .006] = E
± 0.15
[± .006]
Ground Bus
Plug
Housing
Extension
Housing
MICTOR
Interconnection System
17.75 ± 0.28
[.699 ± .011]
14.71
[.579]
Ref.
Contact
Standard Ground
Bus Leads
1.32
[.052]
1.35
[.053]
0.43 ± 0.05
[.017 ± .002]
C Ref.
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Pad
6.35
[.250]
Position No. 2
3.53
[.139]
± 0.05
± .002]
0.64
[.025]
Ø 0.81
[.032
Hole
2.39 ± 0.05
[.094 ± .002]
Orientation Hole
Position No. 1
R 0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
Recommended PC Board Layout
(Connector Side of Board Shown)
Notes: 1. For dual application, the orientation hole must be 1.98±0.03 [.078±.001].
See Application Specification 114-11004 for details.
2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics.
27
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Page_Head
MICTOR
Vertical
(Continued)
Plugs (Continued)
17.96 [.707]
Stacking Height (Continued)
MICTOR
Interconnection System
No. of
Pos.
A
B
Dimensions
C
D
E
38
25.40
1.000
22.81
.898
11.43
.450
0
0.00
.000
76
38.10
1.500
35.51
1.398
24.13
.950
1
12.70
.500
114
50.80
2.000
48.21
1.898
36.83
1.450
2
25.40
1.000
152
63.50
2.500
60.91
2.398
49.53
1.950
3
38.10
1.500
190
76.20
3.000
73.61
2.898
62.23
2.450
4
50.80
2.000
228
88.90
3.500
86.31
3.398
74.93
2.950
5
63.50
2.500
266
101.60
4.000
99.00
3.898
87.63
3.450
6
76.20
3.000
Plating
Part Numbers
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
767025-1䢇
5767025-1
767025-2䢇
5767025-2
767025-3䢇
5767025-3
767025-4䢇
5767025-4
767025-5䢇
5767025-5
767025-6䢇
5767025-6
767025-7䢇
5767025-7
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant;
䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
28
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Page_Head
MICTOR
Vertical
(Continued)
Plugs (Continued)
18.75 [.738]
Stacking Height*
A
Related Product Data
± 0.20
[± .008]
+ 0.00
5.28 ± 0.03
[.208 ± .001]
B –+ 0.05
.000
[ – .002 ]
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
8.13
[.320]
18 Spaces at
0.64 ± 0.15 [.025 ± .006]
= 11.43 ± 0.15 [.450 ± .006]
* 18.75 [.738] stack height when
mated to vertical receptacle;
27.80 [1.093] stack height when
mated to vertical receptacle
(extended height).
C
Position No. 1 Indicator
D Spaces at
12.70 ± 0.15
[.500 ± .006] = E
± 0.15
[± .006]
Ground Bus
Plug
Housing
MICTOR
Interconnection System
18.47 ± 0.28
[.727 ± .011]
15.49
[.610]
Ref.
Extension
Housing
Contact
Standard Ground
Bus Leads
1.45
[.057]
8.72
[.343]
Max.
1.32
[.052]
0.43 ± 0.05
[.017 ± .002]
C Ref.
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Pad
6.35
[.250]
Position No. 2
3.53
[.139]
± 0.05
± .002]
0.64
[.025]
Ø 0.81
[.032
Hole
2.39 ± 0.05
[.094 ± .002]
Orientation Hole
Position No. 1
R 0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
Recommended PC Board Layout
(Connector Side of Board Shown)
No. of
Pos.
A
B
Dimensions
C
D
E
38
25.40
1.000
22.81
.898
11.43
.450
0
0.00
.000
76
38.10
1.500
35.51
1.398
24.13
.950
1
12.70
.500
114
50.80
2.000
48.21
1.898
36.83
1.450
2
25.40
1.000
152
63.50
2.500
60.91
2.398
49.53
1.950
3
38.10
1.500
190
76.20
3.000
73.61
2.898
62.23
2.450
4
50.80
2.000
228
88.90
3.500
86.31
3.398
74.93
2.950
5
63.50
2.500
266
101.60
4.000
99.00
3.898
87.63
3.450
6
76.20
3.000
Plating
Part Numbers
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
767042-1䢇
5767042-1
767042-2䢇
5767042-2
767042-3䢇
5767042-3
767042-4䢇
5767042-4
767042-5䢇
5767042-5
767042-6䢇
5767042-6
767042-7䢇
5767042-7
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant;
䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
29
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
20.00 [.785]
Stacking Height*
A
Related Product Data
± 0.20
[± .008]
+ 0.00
5.28 ± 0.03
[.208 ± .001]
B –+ 0.05
.000
[ – .002 ]
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
8.13
[.320]
18 Spaces at
0.64 ± 0.15 [.025 ± .006]
= 11.43 ± 0.15 [.450 ± .006]
* 20.02 [.788] stack height when
mated to vertical receptacle;
29.00 [1.143] stack height when
mated to vertical receptacle
(extended height).
C
Position No. 1 Indicator
D Spaces at
12.70 ± 0.15
[.500 ± .006] = E
± 0.15
[± .006]
Ground Bus
MICTOR
Interconnection System
Plug
Housing
19.81 ± 0.28
[.780 ± .011]
Extension
Housing
16.76
[.660]
Ref.
Contact
Standard Ground
Bus Leads
1.32
[.052]
1.35
[.053]
0.43 ± 0.05
[.017 ± .002]
C Ref.
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Pad
6.35
[.250]
Position No. 2
3.53
[.139]
Ø 0.81 ± 0.05
[.032 ± .002]
Hole
0.64
[.025]
2.39 ± 0.05
[.094 ± .002]
Orientation Hole
Position No. 1
R 0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
Recommended PC Board Layout
(Connector Side of Board Shown)
Notes: 1. For dual application, the orientation hole must be 1.98±0.03 [.078±.001].
See Application Specification 114-11004 for details.
2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics.
30
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
20.00 [.785]
Stacking Height (Continued)
No. of
Pos.
A
B
Dimensions
C
D
E
25.40
1.000
22.81
.898
11.43
.450
0
0.00
.000
76
38.10
1.500
35.51
1.398
24.13
.950
1
12.70
.500
114
50.80
2.000
48.21
1.898
36.83
1.450
2
25.40
1.000
152
63.50
2.500
60.91
2.398
49.53
1.950
3
38.10
1.500
190
76.20
3.000
73.61
2.898
62.23
2.450
4
50.80
2.000
228
88.90
3.500
86.31
3.398
74.93
2.950
5
63.50
2.500
266
101.60
4.000
99.00
3.898
87.63
3.450
6
76.20
3.000
Part Numbers
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
767032-1䢇
5767032-1
767032-2䢇
5767032-2
767032-3䢇
5767032-3
767032-4䢇
5767032-4
767032-5䢇
5767032-5
767032-6䢇
5767032-6
767032-7䢇
5767032-7
MICTOR
Interconnection System
38
Plating
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant;
䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
31
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
22.86 [.900]
Stacking Height*
A
Related Product Data
± 0.20
[± .008]
+ 0.00
5.28 ± 0.03
[.208 ± .001]
B –+ 0.05
.000
[ – .002 ]
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
8.13
[.320]
18 Spaces at
0.64 ± 0.15 [.025 ± .006]
= 11.43 ± 0.15 [.450 ± .006]
* 22.86 [.900] stack height when
mated to vertical receptacle;
31.90 [1.255] stack height when
mated to vertical receptacle
(extended height).
C
Position No. 1 Indicator
D Spaces at
12.70 ± 0.15
[.500 ± .006] = E
± 0.15
[± .006]
Ground Bus
MICTOR
Interconnection System
Plug
Housing
22.66 ± 0.28
[.892 ± .011]
Extension
Housing
19.61
[.772]
Ref.
Contact
Standard Ground
Bus Leads
1.32
[.052]
1.35
[.053]
0.43 ± 0.05
[.017 ± .002]
C Ref.
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Pad
6.35
[.250]
Position No. 2
3.53
[.139]
Ø 0.81 ± 0.05
[.032 ± .002]
Hole
0.64
[.025]
2.39 ± 0.05
[.094 ± .002]
Orientation Hole
Position No. 1
R 0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
Recommended PC Board Layout
(Connector Side of Board Shown)
Notes: 1. For dual application, the orientation hole must be 1.98±0.03 [.078±.001].
See Application Specification 114-11004 for details.
2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics.
32
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
22.86 [.900]
Stacking Height (Continued)
No. of
Pos.
A
B
Dimensions
C
D
E
25.40
1.000
22.81
.898
11.43
.450
0
0.00
.000
76
38.10
1.500
35.51
1.398
24.13
.950
1
12.70
.500
114
50.80
2.000
48.21
1.898
36.83
1.450
2
25.40
1.000
152
63.50
2.500
60.91
2.398
49.53
1.950
3
38.10
1.500
190
76.20
3.000
73.61
2.898
62.23
2.450
4
50.80
2.000
228
88.90
3.500
86.31
3.398
74.93
2.950
5
63.50
2.500
266
101.60
4.000
99.00
3.898
87.63
3.450
6
76.20
3.000
Part Numbers
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
SnPb
Pb-free
767017-1䢇
5767017-1
767017-2䢇
5767017-2
767017-3䢇
5767017-3
767017-4䢇
5767017-4
767017-5䢇
5767017-5
767017-6䢇
5767017-6
767017-7䢇
5767017-7
MICTOR
Interconnection System
38
Plating
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant;
䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
33
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Right-Angle Plugs
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
A
± 0.20
[± .008]
+ 0.00
B –+ 0.05
.000
[ – .002 ]
5.28 ± 0.03
[.208 ± .001]
Position No. 1 Indicator
Ground Bus
6.38 ± 0.23
[.251 ± .009]
3.53
[.139]
Max.
Housing
Contact
MICTOR
Interconnection System
1.50 ± .018
[.059 ± .007]
18 Spaces at
0.64 ± 0.20 [.025 ± .008]
= 11.43 ± 0.20 [.450 ± .008]
C
F
D Spaces at
12.70 ± 0.20
[.500 ± .008] = E
± 0.20
[± .008]
C Ref.
Ø 1.02 ± 0.05 Hole
[.040 ± .002]
0.05
0.36 +– 0.02
+ .002
[.014 – .001 ]
Pad
4 Spaces at
2.54 [.100]
= 10.16 [.400]
4.80
[.189] 0.81
[.032]
2.59
[.102]
3.73
[.147]
1.78
[.070]
0.43 ± 0.05
[.017 ± .002]
0.64
[.025]
2.41
[.095
± 0.05
± .002]
Orientation Hole
Position No. 1
This Side
R 0.13 [.005]
or
0.13 [.005] x 45°
Recommended PC Board Layout
(Mirror Image on Opposite Side)
34
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Right-Angle Plugs (Continued)
No. of
Pos.
38
Dimensions
A
25.40
1.000
B
22.81
.898
C
11.43
.450
D
0
E
0.00
.000
F
1.52
.060
2.31
.091
1.52
.060
76
38.10
1.500
35.51
1.398
24.13
.950
1
12.70
.500
2.31
.091
114
50.80
2.000
48.21
1.898
36.83
1.450
2
25.40
1.000
1.52
.060
2.31
.091
152
63.50
2.500
60.91
2.398
49.53
1.950
3
38.10
1.500
1.52
.060
2.31
.091
190
76.20
3.000
73.61
2.898
62.23
2.450
4
50.80
2.000
1.52
.060
2.31
.091
228
88.90
3.500
86.31
3.398
74.93
2.950
5
63.50
2.500
1.52
.060
2.31
.091
266
101.60
4.000
99.00
3.898
87.63
3.450
6
76.20
3.000
1.52
.060
2.31
.091
Part Numbers
Tube
767006-1䢇
5767006-1
767055-1䢇
5767055-1
767039-1䢇
5767039-1
767006-2䢇
5767006-2
767055-2䢇
5767055-2
767039-2䢇
5767039-2
767170-2䢇
5767170-2
767006-3䢇
5767006-3
767055-3䢇
5767055-3
767039-3䢇
5767039-3
767006-4䢇
5767006-4
767055-4䢇
5767055-4
767039-4䢇
5767039-4
767006-5䢇
5767006-5
767055-5䢇
5767055-5
767039-5䢇
5767039-5
767006-6䢇
5767006-6
767055-6䢇
5767055-6
767039-6䢇
5767039-6
767006-7䢇
5767006-7
767055-7䢇
5767055-7
767039-7䢇
5767039-7
MICTOR
Interconnection System
2.97
.117
Platings
Solder
Contact
Tail
SnPb
Gold
Pb-free
SnPb
PdNi
Pb-free
SnPb
PdNi
Pb-free
SnPb
Gold
Pb-free
SnPb
PdNi
Pb-free
SnPb
PdNi
Pb-free
SnPb
PdNi
Pb-free
SnPb
Gold
Pb-free
SnPb
PdNi
Pb-free
SnPb
PdNi
Pb-free
SnPb
Gold
Pb-free
SnPb
PdNi
Pb-free
SnPb
PdNi
Pb-free
SnPb
Gold
Pb-free
SnPb
PdNi
Pb-free
SnPb
PdNi
Pb-free
SnPb
Gold
Pb-free
SnPb
PdNi
Pb-free
SnPb
PdNi
Pb-free
SnPb
Gold
Pb-free
SnPb
PdNi
Pb-free
SnPb
PdNi
Pb-free
S = Printed circuit board thickness connector is intended to be used on.
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant;
䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
35
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Receptacles
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Plugs — pages 19-35
Technical Documents — page 81
A
Position No. 1 Indicator
+ 0.08
B –+ 0.00
.003
[ – .000 ]
5.38 ± 0.06
[.212 ± .002]
6.91
[.272]
18 Spaces at
0.64 ± 0.20 [.025 ± .008]
= 11.43 ± 0.20 [.450 ± .008]
C
D Spaces at
12.70 ± 0.20
[.500 ± .008] = E
± 0.20
[± .008]
6.10 ± 0.25
[.240 ± .010]
Ground Bus
MICTOR
Interconnection System
5.99 ± 0.15
[.236 ± .006]
F
± 0.15
[± .006]
Standard Ground
Bus Leads
6.43
[.253]
2.69
[.106]
2.26
[.089]
2.74
[.108]
2.26
[.089]
2.74
[.108]
1.35 ± 0.15
[.053 ± .006]
Contact
Housing
0.18
Ref.
[.007]
Ø 1.94
Ref.
[.077]
8.72
[.343]
Max.
0.43 ± 0.05
[.017 ± .002]
C Ref.
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Pad
6.35
[.250]
Position No. 1
3.53
[.139]
Ø 0.81 ± 0.05
[.032 ± .002]
Dia. Typ. For
Barbed Parts;
Ø 0.64 ± 0.05
[.025 ± .002]
Dia. Typ. For
Barbless Parts
0.64
[.025]
R 0.13 [.005]
or
0.13 [.005] x 45°
Orientation Hole
(See Note)
Position No. 2
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
Recommended PC Board Layout
(Connector Side of Board Shown)
Note: For standard applications, orientation hole to be Ø 2.39±0.05 [.094±.002]; For slip-fit applications,
orientation hole to be Ø 2.00±0.03 [.079±.001].
36
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Receptacles (Continued)
No. of
Pos.
A
B
Dimensions
C
D
E
F
1.40
.055
38
25.40 22.86 11.43
.450
1.000 .900
0
—
1
12.70
.500
PdNi
Gold
2-5767004-2䢇
2.74
Pb-free
.108
Gold
PdNi
Gold
PdNi
5767181-1䢇
5767054-1䢇
2-767004-3䢇
767181-2䢇
2.74 SnPb
.108
1.40
.055 Pb-free
PdNi
767054-2䢇
Gold
2-5767004-3䢇
2.74
Pb-free
.108
Gold
PdNi
Gold
PdNi
5767181-2䢇
5767054-2䢇
2-767004-4䢇
767181-3䢇
2.74 SnPb
.108
1.40 Pb-free
.055
PdNi
767054-3䢇
2.74 Pb-free
.108
Gold
PdNi
Gold
PdNi
5767181-3䢇
5767054-3䢇
2-767004-5䢇
767181-4䢇
2.74 SnPb
.108
1.40 Pb-free
.055
PdNi
767054-4䢇
2.74 Pb-free
.108
Gold
PdNi
Gold
PdNi
5767181-4䢇
5767054-4䢇
2-767004-6䢇
767181-5䢇
2.74 SnPb
.108
1.40
.055 Pb-free
PdNi
767054-5䢇
2.74 Pb-free
.108
Gold
PdNi
Gold
PdNi
5767181-5䢇
5767054-5䢇
2-767004-7䢇
767181-6䢇
2.74
.108 SnPb
1.40
.055 Pb-free
PdNi
767054-6䢇
—
Gold
2-5767004-7䢇
2.74 Pb-free
.108
Gold
PdNi
Gold
PdNi
5767181-6䢇
5767054-6䢇
2-767004-8䢇
767181-7䢇
2.74
.108 SnPb
1.40 Pb-free
.055
PdNi
2.74 Pb-free
.108
1.40
.055
114
50.80 48.26 36.83
2.000 1.900 1.450
2
25.40
1.000
1.40
.055
152
63.50 60.96 49.53
2.500 2.400 1.950
3
38.10
1.500
1.40
.055
190
76.20 73.66 62.23
3.000 2.900 2.450
4
50.80
2.000
1.40
.055
228
88.90 86.36 74.93
3.500 3.400 2.950
5
63.50
2.500
1.40
.055
266
101.60 99.06 87.63
4.000 3.900 3.450
6
76.20
3.000
Gold
PdNi
SnPb
SnPb
SnPb
SnPb
SnPb
SnPb
Gold
Gold
Gold
5767096-8䢇 5767096-1䢇 5767110-1䢇 5767114-1䢇
—
.
5767171-1䢇
767096-9䢇
—
.
—
.
—
.
—
.
—
.
. 5767081-1䢇 5767115-1䢇
—
767096-2䢇 767110-2䢇 767114-2䢇
—
.
—
.
—
.
—
.
767081-2䢇
767115-2䢇
5767096-9䢇 5767096-2䢇 5767110-2䢇 5767114-2䢇
—
.
—
.
1-767096-0䢇
.
—
—
.
5767114-8䢇
—
.
.
—
767114-9䢇
—
.
—
.
MICTOR
Interconnection System
38.10 35.56 24.13
1.500 1.400 .950
SnPb
Part Numbers
Barbed G/B Leads
Barbless G/B Leads
T&R
T&R
Vacuum Caps
Vacuum Caps
Tube
Tube
Without
With
Without
With
2-767004-2䢇
767096-8䢇 767096-1䢇 767110-1䢇 767114-1䢇
767114-8䢇
.
—
.
—
.
—
.
—
.
767181-1䢇
—
.
.
—
—
767054-1䢇
767171-1䢇
767081-1䢇 767115-1䢇
2.74
.108 SnPb
1.40 Pb-free
.055
1.40
.055
76
Platings
Solder
Tail Contact
5767114-9䢇
—
.
—
.
—
.
—
.
—
. 5767081-2䢇 5767115-2䢇
—
.
767096-3䢇 767110-3䢇 767114-3䢇 1-767114-0䢇
—
.
—
.
—
.
—
.
—
.
767081-3䢇
767115-3䢇
—
.
2-5767004-4䢇 1-5767096-0䢇 5767096-3䢇 5767110-3䢇 5767114-3䢇 1-5767114-0䢇
—
.
—
.
1-767096-1䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
. 5767081-3䢇 5767115-3䢇
—
.
767096-4䢇 767110-4䢇 767114-4䢇 1-767114-1䢇
—
.
—
.
—
.
—
.
—
.
767081-4䢇
767115-4䢇
—
.
2-5767004-5䢇 1-5767096-1䢇 5767096-4䢇 5767110-4䢇 5767114-4䢇 1-5767114-1䢇
—
.
—
.
1-767096-2䢇
—
.
—
.
—
.
—
.
—
.
—
.
—
. 5767081-4䢇 5767115-4䢇
—
.
767096-5䢇 767110-5䢇 767114-5䢇 1-767114-2䢇
—
.
—
.
—
.
—
.
—
.
767081-5䢇
767115-5䢇
—
.
2-5767004-6䢇 1-5767096-2䢇 5767096-5䢇 5767110-5䢇 5767114-5䢇 1-5767114-2䢇
—
.
—
.
1-767096-3䢇
—
.
—
—
—
—
.
—
.
—
.
. 5767081-5䢇 5767115-5䢇
. 767110-6䢇
—
.
.
—
.
—
.
—
—
—
—
.
.
.
.
.
—
.
—
.
—
.
—
. 5767110-6䢇
—
.
—
.
—
—
—
—
.
.
.
.
—
—
—
—
.
—
.
. 5767081-6䢇
. 767110-7䢇
.
—
.
—
—
—
—
.
.
.
.
—
—
—
—
.
.
.
.
767054-7䢇
—
.
—
.
767081-7䢇
—
.
—
.
Gold
2-5767004-8䢇
—
.
—
. 5767110-7䢇
—
.
—
.
Gold
PdNi
5767181-7䢇
5767054-7䢇
—
—
.
.
—
—
.
—
.
. 5767081-7⽧
—
—
.
.
—
—
.
.
767081-6䢇
—
.
Note: Contact Product Engineering regarding options not present in this table.
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant;
䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
37
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Receptacles (Extended Height)
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Plugs — pages 19-35
Technical Documents — page 81
A
+ 0.08
B –+ 0.00
.003
[ – .000 ]
Position No. 1 Indicator
5.38 ± 0.06 6.91 8.00
[.212 ± .002] [.272] [.315]
18 Spaces at
0.64 ± 0.20 [.025 ± .008]
= 11.43 ± 0.20 [.450 ± .008]
D Spaces at
12.70 ± 0.20
[.500 ± .008] = E
± 0.20
C
[± .008]
15.01 ± 0.25
[.591 ± .010]
Ground Bus
Contact
Housing
MICTOR
Interconnection System
14.91 ± 0.15
[.587 ± .006]
F
± 0.15
[± .006]
Standard Ground
Bus Leads
Ø 1.94
Ref.
[.077]
8.72
[.343]
Max.
0.43 ± 0.05
[.017 ± .002]
C Ref.
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Pad
6.35
[.250]
Position No. 1
3.53
[.139]
Ø 0.81 ± 0.05
[.032 ± .002]
Dia. Typ. For
Barbed Parts;
Ø 0.64 ± 0.05
[.025 ± .002]
Dia. Typ. For
Barbless Parts
0.64
[.025]
R 0.13 [.005]
or
0.13 [.005] x 45°
Orientation Hole
PC Board Hold Down Required
in This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
Recommended PC Board Layout
(Connector Side of Board Shown)
38
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Receptacles (Extended Height) (Continued)
No. of
Pos.
38
76
152
190
228
B
Dimensions
C
D
E
25.40 22.86 11.43
1.000 .900 .450 0
38.10 35.56 24.13
1
1.500 1.400 .950
50.80 48.26 36.83 2
2.000 1.900 1.450
63.50 60.96 49.53 3
2.500 2.400 1.950
76.20 73.66 62.23 4
3.000 2.900 2.450
88.90 86.36 74.93 5
3.500 3.400 2.950
266 101.60 99.06 87.63 6
4.000 3.900 3.450
F
—
12.70
.500
25.40
1.000
38.10
1.500
50.80
2.000
63.50
2.500
76.20
3.000
1.37
1.37
2.72
1.37
1.37
2.72
1.37
1.37
2.72
1.37
1.37
2.72
1.37
1.37
2.72
1.37
1.37
2.72
1.37
1.37
2.72
1.37
1.37
2.72
1.37
1.37
2.72
1.37
1.37
2.72
1.37
1.37
2.72
1.37
1.37
2.72
1.37
1.37
2.72
1.37
1.37
2.72
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
[.054]
[.054]
[.107]
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Gold
SnPb
PdNi
Gold
Pb-free
PdNi
Tube
767130-1䢇
767094-1䢇
767154-1䢇
5767130-1䢇
5767094-1䢇
5767154-1䢇
767130-2䢇
767094-2䢇
767154-2䢇
5767130-2䢇
5767094-2䢇
5767154-2䢇
767130-3䢇
767094-3䢇
767154-3䢇
5767130-3䢇
5767094-3䢇
5767154-3䢇
767130-4䢇
767094-4䢇
767154-4䢇
5767130-4䢇
5767094-4䢇
5767154-4䢇
767130-5䢇
767094-5䢇
767154-5䢇
5767130-5䢇
5767094-5䢇
5767154-5䢇
767130-6䢇
767094-6䢇
767154-6䢇
5767130-6䢇
5767094-6䢇
5767154-6䢇
767130-7䢇
767094-7䢇
767154-7䢇
5767130-7䢇
5767094-7䢇
5767154-7䢇
Part Numbers
Barbed G/B Leads
Barbless G/B Leads
T&R
T&R
Vacuum Caps
Vacuum Caps
Tube
Without
With
Without
With
767146-1䢇
767146-8䢇
—
—
—
—
—
767178-1䢇
767178-8䢇
—
767153-8䢇 767095-1䢇
—
—
—
5767146-1䢇
5767146-8䢇
—
—
—
5767178-1䢇
1761316-8䢇
—
—
—
5767153-8䢇 5767095-1䢇
—
—
—
—
—
767146-2䢇
767146-9䢇
—
767178-2䢇
—
—
—
—
—
767153-9䢇 767095-2䢇
—
—
—
—
5767146-2䢇
5767146-9䢇
—
5767178-2䢇
—
—
—
—
—
5767153-9䢇 5767095-2䢇
—
—
—
—
767146-3䢇 1-767146-0䢇
—
—
—
—
—
—
—
1-767153-0䢇 767095-3䢇 767145-3䢇 1-767145-0䢇
5767146-3䢇 1-5767146-0䢇
—
—
—
—
—
—
—
—
—
1-5767153-0䢇 5767095-3䢇 5767145-3䢇 1-5767145-0䢇
767146-4䢇 1-767146-1䢇
—
—
—
—
—
—
—
—
—
1-767153-1䢇 767095-4䢇
—
1-767145-1䢇
5767146-4⽧ 1-5767146-1䢇
—
—
—
—
—
—
—
—
—
1-5767153-1䢇 5767095-4䢇
—
1-5767145-1䢇
—
—
—
—
—
767178-5䢇 1-767178-2䢇
—
—
—
—
1-767153-2䢇 767095-5䢇
—
—
—
—
—
—
—
5767178-5䢇 1-1761316-2䢇
—
—
—
—
1-5767153-2䢇 5767095-5䢇
—
—
—
—
—
—
—
—
—
—
—
—
—
1-767153-3䢇 767095-6䢇
—
—
—
—
—
—
—
—
—
—
—
—
—
1-5767153-3䢇 5767095-6䢇
—
—
—
—
—
—
—
—
—
—
—
—
—
1-767153-4䢇 767095-7䢇
—
—
—
—
—
—
—
—
—
—
—
—
—
1-5767153-4䢇 5767095-7䢇
—
—
MICTOR
Interconnection System
114
A
Platings
Solder
Tail Contact
Note: Contact Product Engineering regarding options not present in this table.
Note: Part Numbers are RoHS compliant except: ⽧Indicates non-RoHS compliant;
䢇 Indicates “5 of 6 compliant” (lead in solderable interface only).
39
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Right-Angle Receptacles
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Plugs — pages 19-35
Application Tooling — page 77
Technical Documents — page 81
A
+ 0.08
Position No. 1 Indicator
B –+ 0.00
.003
[ – .000 ]
6.91
[.272]
5.38 ± 0.05
[.212 ± .002]
5.99 ± 0.15
[.236 ± .006]
MICTOR
Interconnection System
1.50
[.059]
18 Spaces at
0.64 ± 0.20 [.025 ± .008]
= 11.43 ± 0.20 [.450 ± .008]
C
Ground Bus
Contact
Housing
3.76
[.148]
Max.
F
D Spaces at
12.70 ± 0.20
[.500 ± .008] = E
± 0.20
[± .008]
C Ref.
Ø 1.02 ± 0.05 Hole
[.040 ± .002]
0.05
0.36 +– 0.02
.002
[.014 +– .001 ]
Pad
4 Spaces at
2.54 [.100]
= 10.16 [.400]
4.80
[.189] 0.81
[.032]
2.59
[.102]
3.73
[.147]
1.78
[.070]
0.43 ± 0.05
[.017 ± .002]
0.64
[.025]
2.41 ± 0.05 Orientation Hole
[.095 ± .002]
Position No. 1
Far Side
R 0.13 [.005]
or
0.13 [.005] x 45°
Recommended PC Board Layout
(Mirror image on opposite side)
PC Board Thickness: 1.57 [.062]
40
Catalog 65194
Revised 6-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
工商网监
湘ICP备2023018690号
