Catalog 1307895
Revised 9-04
Fiber Optic Products Catalog
Tooling and Accessories
Professional Installer Kits —
Epoxy Type Connectors
■
Polishing bushings
■
Polishing film
The Professional Installer
Kits from Tyco Electronics
provide the professional
installer with the necessary
tools required to perform
terminations on the
complete line of epoxy
type fiber optic connector
products. Included in the
kit is a crimp tool, with a
set of interchangeable dies.
In addition, an Inspection
Microscope and Epoxy
Curing Oven are included
with specific kits.
■
Cable and fiber strippers
■
Microscope with tripod
(see page 33 for details)
■
Epoxy curing oven (see
page 33 for details)
Part Number 501258-7
The same as 501258-7
except kit does not contain
microscope or epoxy curing
oven.
For: FSD Connectors, ST, FC
(Polymer crimp body),
FSMA, and SC (Polymer
crimp body)
Includes those tools
necessary to terminate
the connectors listed
above. This is a complete
kit which includes:
■
The same as 501258-7
except the epoxy oven
operates at 220 VAC.
Part Number 501258-9
Note: Epoxy not included in
kit. It must be purchased
separately. See specific
product page for part
numbers.
Crimp tool and crimping
dies
Termination Kits —
Epoxy Type Connectors
Termination kits provide
the materials and tools
(except epoxy, curing oven,
and microscope) required
to terminate a particular
type of fiber optic
connector. Tools are
conveniently packaged
in a handy carrying case.
The kits contain polishing
materials for approximately
60 connectors. The
consumable items in the
kit can be purchased
separately.
Termination Tool Kits —
No Epoxy Type
Part Number 501258-8
For MT-RJ Jack and Plug
Termination Tool Kits, see
page 55.
For LIGHTCRIMP Plus
Termination Tool Kits, see
page 58.
For: Tyco Electronics’
ST, FSMA, FSD, RSD,
SC (polymer crimp body),
FC (polymer crimp body)
Termination Kit
Connector Type
ST
FSMA
FSD
FC and SC
(polymer crimp body)
Cyclops Cable Stripper
Part Number 1375317-1
Ideal for stripping twistedpair (UTP & STP) and fiber
optic cables up to 0.43"
diameter.
For LIGHTCRIMP Termination
Tool Kits, see page 59.
For Additional Tooling
Information, Request Global
Application Tooling Catalog
296240.
© Copyright 2004 by Tyco Electronics Corporation.
30
Part
Number
503746-1
503746-2
503746-6
503746-7
All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise
specified. Dimensions are shown for reference purposes only.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
Catalog 1307895
Revised 9-04
Fiber Optic Products Catalog
Connectors/Adapters/
Tooling & Accessories
Tooling and Accessories (Continued)
QC Quick Cure Adhesive
Product Facts
■
One-part adhesive
eliminates the hassle and
mess of mixing
■
Applies easily and cures
in minutes without heat or
UV light
■
Works with standard
multimode epoxy-style
connectors without
performance degradation
■
Faster procedure for timesaving productivity and
lower installed costs
1
Tube
Size
3 grams
Typical Connector
Terminations
Per Tube*
100
Part Number
492508-1
*Your individual termination techniques will affect the number of terminations
per tube.
Epoxies
EPO-TEK Epoxies
Tyco Electronics offers
EPO-TEK epoxies
formulated for fiber optic
applications. Each epoxy is
a pre-measured, two-part
material packaged in a
BIPAX. Simply remove the
BIPAX center divider and
work the epoxy together.
Adhesive Applicator
Part Number 501473-3
Product Facts
■
EPO-TEK Epoxy
■
Pre-measured BIPAX for
consistent results
■
Ideal for bonding fibers
■
Long relative pot life
■
High service temperature
Description
Individual Epoxies
4-gram pack EPO-TEK 353ND
Recommended Accessories
Syringe manual use (3ccs)
Epoxy Specifications
600-4EPO
Cure Time Room Temp.
Pot Life
Color Before Curing
Color After Curing
Viscosity (cps)
Maximum Temperature
Glass Transition Temp.
Part Number
504035-1
501473-3
Part Number
504035-1
15 min @ 115°C
4 hr.
Amber
Red
2000
200°C
124°C
© Copyright 2004 by Tyco Electronics Corporation.
All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise
specified. Dimensions are shown for reference purposes only.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
31
Catalog 1307895
Revised 9-04
Fiber Optic Products Catalog
Tooling and Accessories (Continued)
Epoxies (Continued)
TRA-CON Epoxy-Bipax
Properties
General Purpose Use:
Low Viscosity
High Impact
Blue for Easy Polish
30 min. Pot Life
Operating Temperature: -60 to 100°C
Ambient Cure: 24 hr. @ 25°C
Oven Cure: 2 hr. @ 65°C or 10 min. at 110°C
Use With
Number of Packs/
Size (gr)
Approx.
Number of Conn.
Part
Number
FSD
ST
FC
SC
FSMA
LC
25/2
250
501195-4
Use With
Number of Packs/
Size (gr)
Approx.
Number of Conn.
Part
Number
FSD
ST
FC
SC
FSMA
LC
1 set of tubes
400
502418-1
HYSOL Epoxy-Tubes
Properties
General Purpose Use:
Medium Viscosity
Blue Color for Easy Polish
30 min. Pot Life
Oven Cure: 30 min. @ 100°C
Part Number
Description
Multimode
FSMA
ST
Hand Polishing Film: (Pack of 10 sheets)
15µm
—
—
9 mm***
—
—
5µm
228433-8
228433-8
1µm
228433-7
228433-7
Fine Diamond Film*
—
—
0.3µm
228433-5
228433-5
Final Polish Film*
—
—
Consumables Kit**
502306-1
502306-1
Singlemode
ST
FC
FSD/RSD
SC
LIGHTCRIMP XTC
LC
—
—
228433-8
—
—
228433-5
502748-2
502306-2
—
—
228433-8
—
—
228433-5
502748-2
502306-2
—
—
228433-8
228433-7
—
228433-5
—
502306-1
—
—
228433-8
—
—
228433-5
502748-2
502306-2
228433-9
—
228433-8
228433-7
—
228433-5
—
—
—
1374484-1
228433-8
—
503887-1
228433-5
—
—
*Pack of 5.
**Contains all consumable supplies for at least 100 connectors
*** Pack of 15
© Copyright 2004 by Tyco Electronics Corporation.
32
All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise
specified. Dimensions are shown for reference purposes only.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
Catalog 1307895
Revised 9-04
Fiber Optic Products Catalog
Connectors/Adapters/
Tooling & Accessories
Tooling and Accessories (Continued)
Epoxy Curing Oven
The Epoxy Curing Oven
reduces the time required
to cure epoxy in fiber
optic connectors. The
oven provides a uniform,
controlled curing
environment which
increases productivity and
consistency of terminations.
The unit accepts all
Tyco Electronics connectors.
The unit comes equipped
to cure up to four duplex
connectors and 12 single
connectors at once.
Optional adapter blocks are
available to cure 8 duplex
or 24 single connectors.
It features a variable
temperature control from
60°C to 125°C and includes
a thermometer and cable
support bracket. 110 and
220 VAC units are available.
1
Description
110 VAC
240 VAC
Adapter Block for 8 Duplex Connectors
Adapter Block for 24 Single Connectors
Block Assembly for 1.6, 2.0 & 2.4 mm
SC & FC (metal crimp body) & LC Connectors
Instruction Sheet 804-9460
Inspection Microscope Kits
Product Facts
The Inspection Microscope
is designed specifically
for visual examination of
terminated or cleaved
ends of singlemode and
multimode fibers in both
field and laboratory
applications. This portable,
hand-held unit provides
magnification for optimum
detection of flaws. It
operates on battery power.
The complete microscope
kit includes a handy
carrying case, tripod stand,
and all adapters needed
to inspect the following
connectors: FSMA, FSD,
ST, FC, F07 and SC.
■
Pre-centered adapter
mount provides quick, easy
focusing, and changing of
connectors
■
Kg-3 infrared filter to protect
the user
■
Durable, lightweight A.B.S.
plastic microscope body
■
Lockable, high-density
polyethylene, double-well
carrying case with anti-static
foam cutouts
Part Number
502134-1
502134-2
502222-1
502129-1
1457628-1
See page 34 for specific
Microscope Part Numbers.
© Copyright 2004 by Tyco Electronics Corporation.
All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise
specified. Dimensions are shown for reference purposes only.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
33
Catalog 1307895
Revised 9-04
Fiber Optic Products Catalog
Tooling and Accessories (Continued)
Microscope with 10x Objective Kits
Components
Description
100x Microscope (10x Eyepiece)
200x Microscope (20x Eyepiece)
FSMA
D4
Universal 2.5 mm**
LC 1.25 ferrule adapter
FC/APC adapter (not included with kit)
SC/APC adapter (not included with kit)
Batteries
“AA” Alkaline
Bulb, 2.8V Lamp Red on/off Switch
Bulb, 2.5V Lamp Green on/off Switch
Tripod
Carrying Case
Accessories
20x Eyepiece
10-20x Zoom Eyepiece
10x Eyepiece
Adapters 100x Microscope Version
F07
MT-RJ
MPO
MPO APC
LIGHTRAY MPX Connectors
LIGHTRAY MPX APC Connectors
ESCON
Microscope Kit
502970-1
502970-3
yes
—
—
yes
yes
yes
yes
yes
yes
yes
Part Number
Qty.
Adapter
Markings
502978-1
502978-2
502971-1
502975-1
502977-1
1278997-1
504617-1
504618-1
1
1
1
1
1
1
1
1
—
—
FSMA
D4
—
—
—
—
—
—
—
—
502964-1
1278471-1
502965-1
—
2
1
1
1
1
—
—
—
—
—
yes
yes
—
yes
yes
yes
yes
—
yes
yes
502969-2
502969-3
502969-1
—
—
—
—
—
—
—
—
Included
Included
—
—
492547-1
492749-1
492414-1
492415-1
492526-1
492527-1
492477-1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
** Inspects ST, SC, FC, FSD and RSD connectors.
Inspection Microscope
Pocket Model
Product Facts
■
100 power magnification
■
Compact hand-held size
■
Range of adapters available
for fiber optic connectors
■
Built-in illumination
■
Battery operated
Description
Microscope
SMA Adapter
2.5 mm Universal
Adapter (SC or ST)
Part
Number
1278132-1
1278133-1
1278134-1
Danger: Active fibers should never
be viewed through a microscope.
Instruction Sheet 408-4497
Scribe Tool
Sapphire-Tipped Scribe Tool
Part No. 504064-1
Replacement Blades
Part No. 504290-1
Product Facts
■
Long-lasting sapphire blade
■
Pen-type case
Instruction Sheet 408-4293
© Copyright 2004 by Tyco Electronics Corporation.
34
All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise
specified. Dimensions are shown for reference purposes only.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
Catalog 1307895
Revised 9-04
Fiber Optic Products Catalog
Connectors/Adapters/
Tooling & Accessories
Tooling and Accessories (Continued)
Hand Tools
PRO-CRIMPER II Hand Tool
Instruction Sheet 408-4020
1
PRO-CRIMPER II Hand Tool
Cable Jacket
Diameter (mm)
Connector
Hand Tool
w/ Die Set
FSMA
3.0
58551-1
ST Ceramic
3.0
58433-4
ST Stainless Steel
3.0
58433-4
ST Polymer Composite
3.0
58433-4
ST Ceramic Used with Loose Tube
3.8
—
ST Stainless Steel (504XXX series only)
3.0
58551-1
3.0
503911-1
SC/FC (Polymer crimp body)
2.4 & 3.0
492026-1
SC, FC (Metal crimp body)
1.6-2.0, 2.4
1588176-1
SC/FC (Metal crimp body)
3.0
—
MPO
1588698-1
FSD - Ceramic
DUALAN & LDD
58519-1
FSD - Polymer
DUALAN & LDD
58519-1
FSD/MC - Ceramic
DUALAN & LDD
58519-1
FSD Breakout Kit
DUALAN & Protection Kit 58519-1
LIGHTCRIMP Plus and LIGHTCRIMP ST
3.0
492623-1
LIGHTCRIMP Plus and LIGHTCRIMP SC
3.0
492782-1
LIGHTCRIMP Plus LC
1754137-1
MT-RJ Plug
1.8
1278632-1
LC
3.0, 2-4, 1.6-2.0
1588176-1
Part Number
Hand Tool
Die Set
Only
Only
58532-1
58552-1 (hex die)
58532-1
58424-1
58532-1
58424-1
58532-1
58424-1
58532-1
503890-1
58532-1
58552-1
58532-1
503910-1
58532-1
492025-1
58532-1
1588175-1
58532-1
492131-1
—
—
58532-1
58510-1
58532-1
58510-1
58532-1
58510-1
58532-1
58510-1
58532-2
492622-1
58532-2
492783-1
58532-1
1754136-1
58532-1
1278627-1
58532-1
1588175-1
Polishing Bushing, Curing Sleeves and Strip Card Kits
Connector
Cable Jacket
Diameter (mm)
FSMA
ST
3.0
Ceramic, Stainless Steel
3.0
Polymer Composite
FC
SC
LC
FSD - Ceramic & Polymer
3.0
3.0
3.0
DUALAN & LDD
Polishing
Bushing
228025-1
Part Number
Curing
Sleeves/Pieces
502249-1 (12 pcs.)
503337-1 (Metal)
503304-1 (Black Polymer) 502259-1 (12 pcs.)
503304-1 (Beige Polymer) 502259-1 (12 pcs.)
504862-1
502862-2 (6 pcs.)
502631-1 (Black Polymer)
502656-1 (1 pc.)
—
1457630-X1 (12 pcs.)
501795-1*
502023-1**
Strip
Card Kit
501818-1
501818-1
501818-1
501818-1
501818-1
1588756-1
501818-1
* Curing Assembly Kit with polishing bushing.
** Curing Assembly Kit without polishing bushing.
1
-1 LC Behind the wall
-2 LC Jumper
Technicians Guide to Fiber Optics (4th Edition)
Author: Don Sterling
Available on the Internet at www.amazon.com (ISBN 1-4018-1270-8)
An excellent introductory and intermediate level fiber optic text, this informative book
covers the fundamentals of data transmission, fiber theory, fiber characteristics, sources
and detectors, connectors and splice products, and other fiber optic components.
© Copyright 2004 by Tyco Electronics Corporation.
All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise
specified. Dimensions are shown for reference purposes only.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
35
