5921050001

RPS C o m m e r c i a l G r a d e C o n t i n u o u s Tu b e H E AT S H R I N K I D E N T I F I C AT I O N S YS T E M Technical Datasheet TTDS-019 Revision 5 - May 2022 RPS Heat Shrink Identification Marker Sleeving, for the identification of wire and cables. Made from durable, flame retarded, radiation cross linked heat shrinkable polyolefin. RPS is a thin wall, light weight, fast recovery 3:1 shrink ratio* sleeve, allowing the customer to cover a wide range of cable diameters. Suitable for a wide variety of applications including, commercial, industrial and transport. Printed marker sleeves meet the mark permanence requirements of AS5942 and MIL 202 Method 215 when used as a complete system, as recommended by TE Connectivity. Refer to TE document 411-121005 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX for the recommended printer/product/ribbon combinations. The Identification system comprises specific printers, thermal transfer ribbons and WINTOTAL software. *Except RPS-38.1 (1-1/2inch) which is 2:1 ratio. PAGE 1 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TTDS-019–RPS TECHNICAL DATA SHEET REVISION 5 RPS COMERICAL GRADE Features Product Compliance • Self-extinguishing, non-flame propagating • RPS fully complies with 2011/65/EU RoHS II directive, and Regulation (EC) number 1907/2006 (REACH) • Good chemical and solvent resistance • Can be laser marked for superior performance • Pre-termination Cable Identification • Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the TE Product Compliance Support Centre: http:// www.te.com/usa-en/utilities/product-compliance.html • Sleeve diameters from 3.18mm to 38.1mm 22-18 to 400-1000 • RPS 3:1 Shrink ratio (RPS-38.1 (1-1/2inch) is 2:1 ratio) Temperature Rating Shelf Life • –30°C to 105°C (-22°F to 221°F) • Refer to TE document 408-121006 Cable Identification Shelf Life Document Application Specifications / Approvals TE Connectivity Standard RW-2510 Specification for RPS products Rail EN45545-2, Railway applications - Fire protection on railway vehicles, Part 2: Requirements for fire behaviour of materials and components Fire Hazard Classification 1 and 2 in accordance with requirement set R24 NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail Systems, Fire protection requirements, Interior Fire Propagation Resistance Federal Railroad Administration, DOT, Appendix B to Part 238, Test Methods and Performance Criteria for the Flammability and Smoke Emission Characteristics of Materials used in Passenger Cars and Locomotive Cabs SHAZAINENNSHI, Japan Railway Rolling Stock & Machinery Association 2003 Classification ‘Flame Retardant’ Serial number 2015-163K Industrial CSA Standard C22.2 No 198.1 Class Number 9032-01 INSULATING DEVICES AND MATERIALS-Insulating Tubing and Sleeving, File reference 31929 UL Certification, Tubing, Extruded Insulating Component File reference YDPU2.E35586 Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2510 PAGE 2 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TTDS-019–RPS TECHNICAL DATA SHEET REVISION 5 RPS Commercial Grade Heat Shrink Part Description RPS -1K -8-4 / -2.0 -S1 -9 9 Colour S1 Scoring (Optional) 2.0 Sleeve Length (inches) 8-4 / Expanded Inside Diameter (AWG) 1K Pack Size RPS Product Family Available Options Pre-scoring Perforated score to produce multiple marker sleeves from each sleeve 1 Pre-score Code S1 2 Pre-scores Code S2 3 Pre-scores Code S3 Packaging sizes RPS 250 pieces 1K 1000 pieces 1.5K 1500 2.5K 2500 pieces 5K 5000 pieces Available for all sizes Available for all sizes 16-10 to 8-4 22-18 to 16-10 22-18 to 16-10 Colours Yellow White (RPS) 4 9 Dimensions in mm (inches) Specify product name, pack size (leave blank if 250 pieces are required), sleeve size, sleeve length, pre-score (leave blank if not required) and colour Ordering Example: RPS-16-10/2.0-S1-9 To maximise print contrast, colours are based on pastel shades. PAGE 3 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TTDS-019–RPS TECHNICAL DATA SHEET REVISION 5 RPS Commercial Grade Heat Shrink Ordering Information Inside diameter Ordering description As supplied (minimum) After recovery (maximum) Recovered Wall Thickness (nominal) Weight Cable Diameter Recommended use range (nominal) mm inches mm inches mm g mm inches RPS - - 22-18 / 2.0 - - 3.18 0.125 1.07 0.042 0.58 0.20 1.2 to 2.7 0.046 to 0.105 RPS - - 18-12 / 2.0 - - 4.75 0.187 1.57 0.062 0.58 0.27 1.7 to 4.1 0.069 to 0.160 RPS - - 16-10 / 2.0 - - 6.35 0.250 2.11 0.083 0.58 0.35 2.3 to 5.5 0.091 to 0.215 RPS - - 8-4 / 2.0 - - 9.53 0.375 3.18 0.125 0.61 0.50 3.5 to 8.1 0.137 to 0.320 RPS - - 10-2 / 2.0 - - 12.70 0.500 4.22 0.166 0.61 0.68 4.6 to 10.8 0.183 to 0.425 RPS - - 6-250 / 2.0 - - 19.05 0.750 6.35 0.250 0.61 1.02 7.0 to 16.2 0.275 to 0.640 RPS - - 1-400 / 2.0 - - 25.40 1.000 8.46 0.333 0.64 1.35 9.3 to 21.6 0.366 to 0.850 RPS - - 400-1000 / 2.0 - - 38.10 1.500 19.05 0.750 0.51 2.20 20.9 to 33.0 0.825 to 1.300 PAGE 4 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TTDS-019–RPS TECHNICAL DATA SHEET REVISION 5 RPS Commercial Grade Heat Shrink Identification Printer Information Print quality and print performance can only be guaranteed when specific TE printer and ribbons are used. The current list of printers and ribbons can be found in TE document 411-121005 ‘Identification Printer Product Ribbon Matrix’ This document can be found in ‘Access Our Tools’: https://www.te.com/usa-en/products/identificationlabeling/printers-software-and-accessories/ printers.html?tab=pgp-story Software WINTOTAL software, available to download for a 14 day evaluation period from the Identification Printer Software page: https://www.te.com/usa-en/products/identificationlabeling/printers-software-and-accessories/printingsoftware/wintotal.html?tab=pgp-story Contact a TE representative for further information. www.te.com TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2022 TE Connectivity Ltd. family of companies All Rights Reserved. PAGE 5 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TTDS-019–RPS TECHNICAL DATA SHEET REVISION 5