6-1542008-3

8 7 6 4 5 3 2 1 REVISION(S) 4 FAN SIZE: 40X40X10mm, 5V, 2 WIRE, DOUBLE BALL BEARING TYPE. 3 LTR DESCRIPTION INIT APP'D A ECR-06-005199 E.T 3/2/06 C.W 3/2/06 AIR FLOW DIRECTION D D ALIGN SCREW WITH HOLE NOTE: C BLACK 1. MATERIAL: HEAT SINK: ALUM. (BLACK ANODIZE) CLIP: BLACK PEI (UL94-VO) PIN FIN HS: 2.000 DIA. 0.750 HT. 2 THE LENGTH OF WIRE: 260mm RED ALIGN SCREW WITH HOLE 2. BEFORE THE HEATSINK APPLICATION, THE USER SHOULD IDENTIFY THE SPECIFICATION OF MAXIMUM LOAD ON THE BGA PACKAGE. HEATSINK TORQUE SPECIFICATIONS CONVERTED TO FORCE. 5 1 3-LEGS CLIP SIZE: 29mm BARE DIE PACKAGE: 1.5 INCH - LB TORQUE = 7.5 LBS FORCE 2.0 INCH - LB TORQUE =10 LBS FORCE C DETAIL C SCALE 3 : 1 C FULL SIZE LID PACKAGE: 1.5 INCH - LB TORQUE = 6.9 LBS FORCE 2.0 INCH - LB TORQUE = 9.3 LBS FORCE CONFIRM WIRE CONFIGURATION AS SHOWN WITH CONNECTOR TABS FACE UP CONNECTOR: MOLEX 51021-0200-5 JST. 3. REMOVE CLIP WITH REMOVAL TOOL P/N: 1542616-1. 4. RoHS COMPLIANT AND CERTIFIED. .016±.002 2.000 ±.020 DETAIL A SCALE 6 : 1 1.033 MAX B .095 .245±.005 3/4" - 27 UNS -2A THREAD B 1.147 LIP LEG 1.220 ° C/W @ ° C/W @ ° C/W @ ° C/W @ Power Ambient 200 LFM 400 LFM 600 LFM 5 Watts 7.66 4.20 3.15 2.50 10 Watts 6.97 4.01 2.99 2.35 15 Watts A 7 6.51 ITEM DESCRIPTION QTY 1 MOUNTING CLIP 1 2 HEAT SINK 1 3 FAN 1 4 SCREW 2 5 INTERFACE 1 DO NOT SCALE .115 ±.005 B .750 B A 8 1.278 3.9 UNLESS OTHERWISE SPECIFIED TOLERANCES ARE: .XX .XXX .XXXX ANGLES . 2.95 DRAWN BY: FILENAME MATERIAL: 3/2/06 SEE NOTE DATE PROJECT CONFIDENTIAL PROPERTY OF TYCO ELECTRONICS. NOT TO BE DISCLOSED TO OTHERS. REPRODUCED OR USED FOR ANY PURPOSES EXCEPT AS AUTHORIZED IN WRITING BY AN AUTHORIZED OFFICIAL OF TYCO. MUST BE RETURNED TO TYCO ON DEMAND, ON COMPLETION OF ORDERS OR OTHER PURPOSES FOR WHICH LENT. DIMENSONS ARE IN: 3/2/06 C. WANG . CUSTOMER DRAWING SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 1.69 DATE E.TAO ENGINEER: . 2.28 SECTION B-B WITH FAN 1.77 1.71 SYSTEM FINISH: INCHES SEE NOTE SCALE: 1:1 SIZE: TNIRD ANGLE PROJECTION A A TITLE: 29mm PIN FIN HEATSINK ASSEMBLY PART NO: 6-1542008-3 DWG. NO. C-6-1542008-3 SHEET: 1 OF 1 REV: A