METRIC Catalogue 1654742
Rast 5
Dimensions are
millimetres over inches
Revised 5-04
Table of Contents
AMP multifitting Mark II
Introduction ……………………………………………………………………………2002
Direct and Indirect Connection 5.0mm Centerline…………………………………2003
Derating Curves ………………………………………………………………………2004
Keying Plan and Cable Exit …………………………………………………………2005
Technical Features ……………………………………………………………………2006
Direct Mating Connector System ……………………………………………2007, 2008
Indirect Mating Connector System……………………………………………2009-2011
PC Board Frame ………………………………………………………………………2012
2
Rast 5
AMP MONO-SHAPE
Introduction ……………………………………………………………………………2013
Connector Versions …………………………………………………………………2014
Tab Connectors ………………………………………………………………………2015
Tab Connectors Keying Plan ………………………………………………………2016
Tab Connector 3-10 Positions ………………………………………………2017-2020
Single Way Connectors ………………………………………………………………2021
Single Way Connectors Keying Plan ………………………………………………2022
PCB Connectors ………………………………………………………………2023-2027
Satellite Connectors …………………………………………………………………2028
Satellite Connectors Keying Plan……………………………………………………2029
Bridge Connectors Keying Plan ……………………………………………………2030
AMP MONO-SHAPE Mark II
Introduction ……………………………………………………………………………2031
Technical Data ………………………………………………………………………2032
Keying Plan and Cable Exit …………………………………………………………2033
Tab Connector System ………………………………………………………2034-2035
TAB-BRIDGE Connector System - Short Circuit …………………………………2036
PCB Connector System ………………………………………………………2037-2041
Application Tooling ……………………………………………………………2042-2045
Standard Timer
Introduction …………………………………………………………………………… 2046
Interior and Exterior Locking …………………………………………………………2047
Keying Plan ……………………………………………………………………………2048
Housings ………………………………………………………………………2049-2059
Connectors and Contacts ……………………………………………………………2060
2001
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP multifitting Mark II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Dimensions are
millimetres over inches
Revised 5-04
Introduction
Product Features
■ Direct Mating Connectors
for PC Boards, 2–8
Positions, up to 6 A Current
Carrying Capacity
■ Indirect Mating Connectors,
1–8 Positions, up to 16 A
Current Carrying Capacity
■ Variable Keying
■ Double Wire Termination
possible
Tyco Electronics’ newly
designed AMP multifitting
Mark II Connector System
was developed according
to the latest connector
design standards.
The requirements of
advanced In-Line mating
technology for the
components and contacts of
pc boards are incorporated
in the direct and indirect
versions of these connector
systems.
This system is suitable for a
wide wire size range.
Current carrying capacity is
16 A maximum.
Double termination is
possible with 0.5 and 0.5
mm2 or 0.5 and 0.75 mm2
conductors.
The connectors are available in 1- to 8-positions
(indirect) resp. 2- to 8positions (direct) with an
exterior locking device.
Interior locking options are
available on request.
Supplied in chain and
provided with all keying and
polarisation ribs, the
connectors can be operated
economically with modern
Application Tooling
Equipment.
2002
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP multifitting Mark II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Dimensions are
millimetres over inches
Revised 5-04
Direct and Indirect Mating Connection, 5.0 mm Centerline
Direct Mating Connection,
5.0 mm Centerline
4
3
1 Double Wire Exit
2 Wire Exit 90°
2
3 Wire Exit 180°
Rast 5
4 Cover
5 Exterior Locking Latch
6 Keying
5
1
7 Polarisation
2
7
Indirect Mating Connection,
5.0 mm Centerline
6
4
3
1 Double Wire Exit
2 Wire Exit 90°
3 Wire Exit 180°
4 Cover
5 Exterior Locking Latch
6 Keying
1
5
7 Polarisation
Indirect Mating Connection
with Interior Locking,
5.0 mm Centerline
6
2
7
3
4
1 Double Wire Exit
2 Wire Exit 90°
3 Wire Exit 180°
4 Cover
5 Interior Locking Latch
1
6 Keying
2
7 Polarisation
5
6
7
2003
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP multifitting Mark II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Derating Curves
Direct Mating Connector
System
I /A
7
6
Connector:
8 positions
Current
5
Material:
Brass, tin plated
4
3
2
Wire:
0.5 mm2
1
PC Board:
FR4, 2 x 0.35 µm Copper,
tin plated
t/°C
0
0
10
20
30
40
50
60
70
80
90
100
110
Ambient Temperature
Indirect Mating Connector
System
I /A
/
3
10
9
8
Material:
Brass, tin plated
Curve 1:
2 positions
7
2
Wire:
0.5 mm2 (Curve 1 and 2)
1.0 mm2 (Curve 3)
1
Curve 2:
8 positions
Current
6
5
Curve 3:
4 positions
4
Mating Part:
6.3 x 0.8 mm Tab,
Brass, tin plated
3
2
1
t/ϒ
/ϒC
/ϒ
0
0
20
40
60
80
100
120
Ambient Temperature
Indirect Mating Connector
System
I /A
18
2
1
16
Curve 1:
1 position
14
Material:
CuNi2Si, silver plated
Curve 2:
4 positions
12
Current
Wire:
1.5 mm2, tin plated
Mating Part:
6.3 x 0.8 mm Tab,
Brass, tin plated
10
8
6
4
2
t/°C
0
0
20
40
60
80
100
120
140
Ambient Temperature
2004
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP multifitting Mark II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Keying Plan and Cable Exit
Keying Plan
from Mating Direction,
Fully-Keyed Version
3
c
3 Polarisation Rib
–5–
–4–
–3–
2 Keying Rib
2
d
1 Locking Latch
–2–
a
– 1 –b
4
Rast 5
4 Cavity Number
1
2
–5–
–4–
–3–
c
d
This final keying version will be
produced on the Application
Tooling Equipment.
– 2 –b
–1–
Keyed Version:
05-C according RAST 5
Cable Exit with Interior
and Exterior Locking
Cable Exit with Interior Locking
Cable Exit with Exterior Locking
Direct Mating of a PCB
with PC Board Frames
2005
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP multifitting Mark II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Dimensions are
millimetres over inches
Revised 5-04
Technical Features
Technical Data
Centerline:
5.0 mm
Housing Material:
Polyamide, PA 6.6 and PA 6
Standard Colour:
Natural
Current Voltage:
250 V ~
Air and Creepage Distance:
>3.2 mm
Flammability Rating:
UL 94 V-2
Approvals:
VDE, UL
Direct Mating Connectors
Indirect Mating Connectors
No. of Positions:
2- to 8-positions
Contact Material:
Brass
Contact Finish:
Tin plated
Wire Size Range:
0.35–1.0 mm2
Temperature Range:
–40 °C up to +105 °C
Current Rating:
6 A max.
Insulation Diameter:
2.8 mm max.
Insulation Resistance:
>10 MΩ
Mating Force:
≤7 N per contact*
Unmating Force:
≥1.5 N*
Product Specification:
108-18653
Application Specification:
114-18289
*) measured with polished steel
No. of Positions:
1- to 8-positions
Contact Material:
Brass / CuNi2Si
Contact Finish:
Tin plated / silver plated
Wire Size Range:
0.35–1.0 mm2 / 1.0–1.5 mm2
Temperature Range:
–40 °C up to +130 °C
Current Rating:
10 A, up to 4 contacts 16 A
Insulation Diameter:
3.0 mm max.
Insulation Resistance:
>10 MΩ
Mating Force:
≤6.5 N per contact**
Unmating Force:
≥1.5 N**
Product Specification:
108-18652
Application Specification:
114-18288, 114-18382
**) measured with polished steel
plate 1.5 mm thickness
tab 6.3 x 0.8 mm
2006
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP multifitting Mark II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Direct Mating Connector System
Technical Data
Wire Size Range:
0.35–1.0 mm2
Current Carrying Capacity (max.):
6A
Part Numbers
with Exterior Locking
PA 6.6
PA 6 *
1-1241172-2
1-1534075-2
Package
Quantity
Part Numbers
with Interior Locking
PA 6.6
PA 6 *
4,900
–
–
1-1534075-3
3,136
–
–
1-1534075-3
3,136
–
–
1-1534075-4
2,352
–
–
1-1534075-4
2,352
–
–
1-1534075-5
1,960
–
–
1-1534075-5
1,960
–
–
2
–4–
–5–
–5–
–4–
–3–
–3–
–4–
–4–
–3–
–2–
–2–
–3–
–3–
–3–
–1–
–2–
–2–
–2–
1-1241172-5
–2–
1-1241172-4
–1–
1-1241172-4
–1–
–1–
1-1241172-3
–1–
1-1241172-3
–1–
–2–
Rast 5
–1–
RAST 5 Version
1-1241172-5
*)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report.
The final keying version will be produced on the Application Tooling Equipment.
2007
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP multifitting Mark II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Direct Mating Connector System (continued)
Technical Data
Wire Size Range:
0.35–1.0 mm2
Current Carrying Capacity (max.):
6A
Part Numbers
with Exterior Locking
–6–
–6–
–6–
–8–
–8–
–7–
–7–
–7–
–7–
–5–
–5–
–5–
–6–
–6–
–6–
–6–
–4–
–4–
–4–
–5–
–5–
–5–
–5–
–3–
–3–
–3–
–4–
–4–
–4–
–4–
–2–
–2–
–3–
–3–
–3–
–3–
–2–
1-1241172-8
–2–
–2–
–1–
1-1241172-7
–1–
1-1241172-7
–2–
2-1241172-6
–1–
1-1241172-6
–1–
1-1241172-6
–2–
1-1534075-6
–1–
PA 6*
–1–
PA 6.6
–1–
RAST 5 Version
1-1241172-8
Package
Quantity
Part Numbers
with Interior Locking
PA 6.6
PA 6 *
1,568
–
–
1-1534075-6
1,568
–
–
2-1534075-6
1,568
–
–
1-1534075-7
1,372
–
–
1-1534075-7
1,372
–
–
1-1534075-8
1,176
–
–
1-1534075-8
1,176
–
–
*)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report.
The final keying version will be produced on the Application Tooling Equipment.
2008
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP multifitting Mark II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Indirect Mating Connector System
Technical Data
Wire Size Range:
0.35–1.0 mm2
Part Numbers
with Exterior Locking
–3–
–5–
–5–
–4–
–4–
–4–
–4–
–3–
–3–
–3–
–3–
–2–
–2–
–2–
1-1241170-5
–2–
1-1241170-4
–1–
1-1241170-4
–1–
–1–
1-1241170-3
–1–
1-1241170-3
–3–
–2–
1-1241170-2
–2–
1-1534072-1
–2–
1-1241170-1
–1–
PA 6 *
–1–
PA 6.6
1-1241170-5
Part Numbers
with Interior Locking
Package
Quantity
PA 6.6
PA 6 *
9,604
-1241170-1
1-1534072-1
1-1534072-2
4,900
1-1394355-2
1-1534077-2
1-1534072-3
3,136
1-1394355-3
1-1534077-3
1-1534072-3
3,136
1-1394355-3
1-1534077-3
1-1534072-4
2,352
1-1394355-4
1-1534077-4
1-1534072-4
2,352
1-1394355-4
1-1534077-4
1-1534072-5
1,960
1-1394355-5
1-1534077-5
1-1534072-5
1,960
1-1394355-5
1-1534077-5
2
Rast 5
–1–
RAST 5 Version
–1–
Current Carrying Capacity
(max.):
10 A
*)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report.
The final keying version will be produced on the Application Tooling Equipment.
2009
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP multifitting Mark II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Indirect Mating Connector System (continued)
Technical Data
Wire Size Range:
0.35–1.0 mm2
Current Carrying Capacity
(max.):
10 A
Part Numbers
with Exterior Locking
RAST 5 Version
–6–
–6–
–6–
–8–
–8–
–7–
–7–
–7–
–7–
–5–
–5–
–5–
–6–
–6–
–6–
–6–
–4–
–4–
–4–
–5–
–5–
–5–
–5–
–3–
–3–
–3–
–4–
–4–
–4–
–4–
–2–
–2–
–2–
–3–
–3–
–3–
–3–
–1–
–1–
–2–
1-1241170-8
–2–
–2–
–1–
1-1241170-7
–1–
1-1241170-7
–2–
2-1241170-6
–1–
1-1241170-6
–1–
1-1241170-6
–1–
PA 6.6
1-1241170-8
Package
Quantity
PA 6*
Part Numbers
with Interior Locking
PA 6.6
PA 6*
1-1534072-6
1,568
–
–
1-1534072-6
1,568
–
–
2-1534072-6
1,568
–
–
1-1534072-7
1,372
–
–
1-1534072-7
1,372
1394355-7
1534077-7
1-1534072-8
1,176
–
–
1-1534072-8
1,176
–
–
*)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report.
The final keying version will be produced on the Application Tooling Equipment.
2010
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP multifitting Mark II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Indirect Mating Connector System (continued)
Technical Data
Wire Size Range:
1.0–1.5 mm2
Current Carrying Capacity (max.):
16 A
Part Numbers
with Exterior Locking
RAST 5 Version
PA 6 *
1-1241171-1
1-1534073-1
1-1241171-2
PA 6.6
PA 6 *
9,604
1--1241171-1
1-1534073-1
1-1534073-2
4,900
1-1394556-2
1-1534078-2
1-1534073-3
3,136
1-1394556-3
1-1534078-3
1-1534073-3
3,136
1-1394556-3
1-1534078-3
1-1534073-4
2,352
1-1394556-4
1-1534078-4
1-1534073-4
2,352
1-1394556-4
1-1534078-4
2
–3–
–4–
–4–
–3–
–3–
–3–
–2–
–2–
–2–
1-1241171-4
–2–
–1–
–1–
1-1241171-3
–1–
1-1241171-3
–1–
–2–
–1–
Rast 5
–1–
PA 6.6
Part Numbers
with Interior Locking
Package
Quantity
1-1241171-4
*)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report.
The final keying version will be produced on the Application Tooling Equipment.
2011
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP multifitting Mark II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
PC Board Frame
Latching Hole
Keying
PC Board Frame
PC Board
B
A
No. of
Positions
2
4
5
Dimensions
(mm)
A
B
5
10.1
15
20
20.1
25.1
6
25
30.1
7
30
35.1
8
35
40.1
122
55
60.1
Keying
Latching
Polarisation
Additional
Board
Lock
Part Number
PC Board Frame,
PA 6.6, Black
1c, 2d
1/2
–
–
2-964577-2
1c, 2d, 3c
1/2, 3/4
2b
–
1-964577-4
1c, 3c, 4d
1/2, 3/4
4b
–
2-964577-4
1c, 3c, 4d
1/2, 3/4
1b, 4a
–
3-964577-4
3d
1/2, 4/5
–
–
1-964577-5
4d
1/2, 5/6
6b
–
1-964577-6
4d
1/2, 5/6
1b, 6a
–
2-964577-6
2c, 3d, 7c
2/3, 5/6
1b, 2b
4/5
1-964577-7
2c, 3d, 7c
2/3, 5/6
2b, 7a
4/5
2-964577-7
2c, 3d, 7c
2/3, 7/8
2a
4/5
1-964577-8
2c, 3d, 7c
2/3, 7/8
2b, 4b
4/5
2-964577-8
1c, 2d, 3c, 4d,
5c, 8c, 10d, 12d
1/2, 3/4, 5/6,
8/9, 9/10, 11/12
2b, 3a, 4a, 6a,
7a, 7b, 8a, 8b
4/5, 8/9
1-964578-2
Package
Quantity
2,200
1,700
1,500
1,500
1,200
1,000
1.500
Preferred Parts are printed bold
2012
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Dimensions are
millimetres over inches
Revised 5-04
Introduction
AMP MONO-SHAPE
Connectors in In-Line
Mating Technology
AMP MONO-SHAPE connectors
represent a valid solution to the
ever-increasing requirements
for production and application
flexibility. They are high
productivity, great flexibility,
quality, minimum applied cost.
2
Rast 5
AMP MONO-SHAPE productline includes a full range of 5.0
mm pitch modular connectors
contents with similar outer
shape, several variation in the
mating area such as PC Board
and 6.3 x 0.8 mm tabs (RAST
5), plus a version for harness
shunts.
AMP MONO-SHAPE connection
system adopts the IDC
termination technology, which
improves application results
and quality level.
The AMP MONO-SHAPE
product range, combined with
the performances and
properties offered by the
termination system, allow to
manufacture extremely
complicated harness structures
while still maintaining high
production levels.
Technical Features
■ IDC Connector system
design to maximise the
full integration with the
application tooling assuring
total flexibility in harness
design.
■ The connector incorporates
modern in-line mating
technology on a 5.0 mm
centerline with no loss of
spacing and a variety of
keying possibilities.
■ High current system, up
to 16 Ampere, designed to
satisfy several appliance
requirements.
■ Wiring faults eliminated
through high automation.
■ ID Contact designed to
accept standard discrete
wires ranging from 0.5 up to
1.5 mm2, according to the
connector configuration.
■ Approvals:
VDE: 4751-1431-4024 / A
10A and
4751-1431-4024 / A 9E
UL E 28476 Vol. 9 Sec. 7;
97 ME 17936; AP-27HB
2013
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Dimensions are
millimetres over inches
Revised 5-04
AMP MONO-SHAPE Connector Versions
Same Shape Different Applications
With the same outside shape
four connector versions are
available, which are to handle
with the same application
tooling.
TAB Connectors
2–12 position 5.0 mm pitch
connectors with insulation
displacement contacts mateable
with components according to
RAST 5 and with tinned copper
alloy tab 6.3 x 0.8 mm
according to DIN 46244.
Wire Size Range:
0.5–1.5 mm2
Current Rating:
16 Ampere max. acc. to wire size
LIF version 2
point contact
instead of 4 as
per standard
version
-For LIF version up to
10 Ampere max
Single Way Connectors
Single Way connectors with
insulation displacement
contacts for use on tinned
copper alloy tab 6.3 x 0.8 mm
according to DIN 46244.
Wire Size Range:
0.5–1.5 mm2
Current Rating:
16 Ampere max. acc. to wire size
Supply Status:
In order to increase productivity these items are supplied
in sticks.
PCB Connectors
2–12 position 5.0 mm pitch
connectors with insulation
displacement contacts according to printed circuit boards
with thickness 1.5± 0.2 mm and
5.0 mm pitch.
Wire Size Range:
0.5–0.75 mm2
Current Rating:
6 Ampere max. acc. to wire size
PC Board:
Single or both sides printed 5
µm tin over 35 µm copper
Satellite Connectors
3 position connectors, pitch
5.0 mm, with short circuited
insulation displacement
contacts for harness shunts.
Wire Size Range:
0.5–1.5 mm2
Current Rating:
16 Ampère max. acc. to wire size
2014
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
TAB Connector
AMP MONO-SHAPE
TAB Connector
1
6
1 Cover closed after Wire
Insertion. Wire Direction
90°. 180° when locked in
Cover Recess
2
2 Cavity Numbers
Rast 5
2
3 Polarisation
similar to the Keying
(Located on the Back Side)
3
4 Keying
5 Interior Locking Latch
5
6 Colour Marking
4
Technical Features
Centerline:
5.0 mm, according to RAST 5
specifications
Configurations:
2- to 12-positions
Housing Material:
Plastic PA 6.6
Housing Colour:
Natural colour for standard
version
Grey colour for LIF version
Contact Material:
Copper alloy, post-tinned
2.0 µm min.
Polarisation, Keying,
Locking Latches:
according to RAST 5
specifications
(see customer drawings)
Track Resistance:
as per IEC 112 (250 V)
Glow Wire Test:
as per IEC 695-2-1 (850 °C)
and 750°C no flame
Air and Creepage Distance:
according to EN 60998-1
(IEC 998-1) for 380 V, ≥4.0 mm
Voltage Resistance:
according to EN 60998-1
(IEC 998-1) 1750 V for 4 minutes
Insulation Resistance:
according to EN 60998-1
(IEC 998-1) >5 MΩ
Wire Size Range:
from 0.5 to 1.5 mm2
Current Rating:
Standard Version
16 A max. according to wire
size
0.5 mm2 ≤3 A, 0.75 mm2 ≤6 A,
1.0 mm2 ≤10 A, 1.5 mm2 ≤16 A
LIF Version
10 A max. according to wire
size
0.5 mm2 ≤3 A, 0.75 mm2 ≤6 A,
1.0 mm2 ≤10 A, 1.5 mm2 ≤10 A
Rated Voltage:
380 Volts max.
Wire Type:
H05V-K (70 °C max.)
or FR 3/2 (105 °C max.)
for 0.5–1.0 mm2 wires with
copper or tinned stranded wires
H07V-K (70 °C max.)
or FR 3/2 (105 °C max.)
for wires from 1.5 mm2 with
copper or tinned stranded wires
Insulation Type:
PVC suitable for temperatures
up to 70 °C / 105 °C
Insulation Diameter Range:
2.0–3.5 mm
Temperature Range:
–25 °C up to +105 °C
Wire Extraction Force/Way:
50 N min. on wire size 0.5 mm2
Application Specification:
114-20016
Product Specification:
Standard version: 108-20065
LIF version: 108-20215
Homologations:
acc.to VDE File No. 3905
(to 16 A) and UL File No.
E28476 (to 14 A)
2015
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Keying Plan
Keying Plan
from Mating Direction,
4
5
AMP MONO-SHAPE
TAB Connector
1
–7–
–6–
–4–
c
c
5 Cavity Number
–3–
4 Polarisation Rib
–2–
3 Keying Rib
d
–1–
a
2 Slanted Keying Rib
– 5 –b
1 Locking Latch
2
3
2 Position RAST 5 Variations
(Variable Keying)*
Suitable for RAST 5 Version
Colour Marking
Part
Numbers
RAST 5 Version
Packaging
Unit
On Reel
1-282002-2
2-282002-2
3-282002-2
1-284338-2
2-284338-2
—
1-282002-1
2-282002-1
2-282002-1
1-284338-1
2-284338-1
—
1-282002-3
2-282002-3
—
1-284338-3
2-284338-3
3-284338-3
1-282002-4
2-282002-4
—
1-284338-4
—
—
1-282002-5
2-282002-5
1-282002-6
—
—
Loose Piece
On Reel
6.500
3.500
28.500
6.500
3.500
28.500
6.500
3.500
28.500
6.500
3.500
—
—
6.500
3.500
—
2-282002-6
—
6.500
3.500
—
1-282002-7
2-282002-7
3-282002-7
1-284338-7
—
—
6.500
3.500
28.500
d
–1–
On Reel
–2–
d
– 2 –b
Red
c
02-L
02-P
–1–
c
Black
d
02-C
–1–
a
Grey
c
02-B
02-E
02-F
– 2 –b
Loose Piece
a
On Tray
02-A
02-O
Blue
02-Q
Black
—
Black
* Final keying version is produced on the Application Tooling Machines.
Bold Part Numbers are LIF Version
2016
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
AMP MONO-SHAPE TAB Connector
3 Position RAST 5 Variations
(Variable Keying)*
–3–
Loose Piece
On Reel
1-282003-1
2-282003-1
3-282003-1
1-284339-1
2-284339-1
—
1-282003-2
2-282003-2
3-282003-2
1-284339-2
2-284339-2
—
1-282003-3
2-282003-3
—
1-284339-3
2-284339-3
—
282233-2
282233-2
—
1-282003-4
2-282003-4
—
1-284339-4
2-284339-4
—
1-282003-5
2-282003-5
—
1-284339-5
2-284339-5
—
1-282003-6
2-282003-6
1-282003-7
1-284396-1
On Reel
Loose Piece
On Reel
4.160
2.500
24.000
4.160
2.500
24.000
4.160
2.500
—
4.160
2.500
—
4.160
2.500
—
4.160
2.500
—
—
4.160
2.500
—
—
—
4.160
—
—
—
—
4.160
—
—
2
– 3 –b
d
–2–
d
c
– 2 –b
d
– 3 –b
–2–
d
c
d
c
–1–
On Tray
–3–
– 3 –b
d
– 3 –b
– 2 –b
d
–2–
c
d
c
–1–
c
d
Grey
– 2 –b
03-B
03-K
c
Red
–1–
03-B
03-K
d
c
–
c
03-D
–1–
a
Green
c
03-F
–1–
a
Blue
d
c
03-B
03-K
c
Orange
Packaging
Unit
Rast 5
03-A
03-I
Part
Numbers
RAST 5 Version
– 1 –b
Suitable for RAST 5 Version
Colour Marking
—
– 3 –b
d
– 2 –b
d
c
Black
c
03-B
–1–
Violet
—
Black
* Final keying version is produced on the Application Tooling Machines.
Bold Part Numbers are LIF Version
2017
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
AMP MONO-SHAPE TAB Connector
4 Position RAST 5 Variations
(Variable Keying)*
Suitable for RAST 5 Version
Colour Marking
Part
Numbers
On Reel
On Reel
Loose Piece
On Reel
1-282004-1
2-282004-1
3-282004-1
2.120
2.000
18.750
1-282004-2
2-282004-2
3-282004-2
2.120
2.000
18.750
1-282004-3
2-282004-3
—
2.120
2.000
—
c
d
–4–
Loose Piece
–4–
d
–3–
On Tray
–4–
d
c
d
c
–3–
Red
c
04-A
– 3 –b
– 1 –b
– 1 –b
c
Black
d
c
–1–
04-D
–2–
c
Grey
–2–
d
04-A
–2–
d
RAST 5 Version
Packaging
Unit
5 Position RAST 5 Variations
(Variable Keying)*
Suitable for RAST 5 Version
Colour Marking
–5–
Packaging
Unit
On Tray
Loose Piece
On Reel
On Reel
Loose Piece
On Reel
1-282005-1
2-282005-1
—
2.600
1.500
18.750
1-284545-1
—
—
2.600
1.500
18.750
d
– 4 –b
d
c
–3–
d
c
–2–
d
c
–1–
RAST 5 Version
c
Red
Part
Numbers
Red
* Final keying version is produced on the Application Tooling Machines.
2018
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
AMP MONO-SHAPE TAB Connector
6 Position RAST 5 Variations
(Variable Keying)*
Suitable for RAST 5 Version
Colour Marking
Part
Numbers
RAST 5 Version
Packaging
Unit
Loose Piece
On Reel
On Reel
Loose Piece
On Reel
Violet
1-282006-1
2-282006-2
3-282006-2
2.080
1.200
13.500
—
1-282006-3
2-282006-3
3-282006-3
2.080
1.200
13.500
Red
1-284745-1
—
—
2.080
—
—
2
Rast 5
On Tray
7 Position RAST 5 Variations
(Variable Keying)*
Suitable for RAST 5 Version
Colour Marking
Black
–7–
Packaging
Unit
On Tray
Loose Piece
On Reel
On Reel
Loose Piece
On Reel
1-282007-1
2-282007-1
—
1.820
1.200
—
1-284397-1
—
—
1.820
1.200
—
d
–6–
d
c
– 5 –b
–4–
d
c
–3–
d
c
–2–
d
c
– 1 –b
c
—
Part
Numbers
RAST 5 Version
2019
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
AMP MONO-SHAPE TAB Connector
8 Position RAST 5 Variations
(Variable Keying)*
Suitable for RAST 5 Version
Colour Marking
Packaging
Unit
On Tray
Loose Piece
On Reel
On Reel
Loose Piece
On Reel
1.560
900
—
1.560
900
—
–8–
284085-1
2-284085-1
—
1-284685-1
2-284685-1
—
284085-2
2-284085-2
—
d
d
c
–7–
a
– 6 –b
d
c
–5–
d
c
– 4 –b
d
c
–3–
d
c
d
c
–1–
– 2 –b
RAST 5 Version
d
c
c
—
Part
Numbers
Violet
* Final keying version is produced on the Application Tooling Machines.
Bold Part Numbers are LIF Version
10 Position RAST 5 Variations
(Variable Keying)*
Suitable for RAST 5
Version
Colour Marking
Packaging
Unit
On Tray
Loose Piece
On Reel
1-282010-1
2-282010-1
—
1-284686-1
2-284686-1
—
On Reel
Loose Piece
On Reel
1.300
700
—
– 10 –
d
–9–
d
c
–8–
a
–7–
d
c
– 6 –b
d
c
–5–
d
c
–4–
–3–
d
c
–2–
d
c
–1–
d
c
c
—
Part
Numbers
RAST 5 Version
* Final keying version is produced on the Application Tooling Machines.
Bold Part Numbers are LIF Version
2020
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
AMP MONO-SHAPE Single Way Connector
Single Way Connector
1
2
1 All Single Way Connectors
are supplied in “stick-form”
by 6 single ways each.
They will be cut from the
Application Tooling Machines
2
Rast 5
2 Cover closed after Wire
Insertion. Wire Direction 90°.
180° when locked in Cover
Recess
3 Polarisation similar to the
keying of the front side
3
4 Keying
5 Plastic Noses which Lock
into the TAB Hole
6 Colour Marking
5
4
Technical Features
Centerline:
5.0 mm, according to RAST
5 specifications
Configurations:
1 position
Housing Material:
Plastic PA 6.6
Housing Colour:
Natural colour
Contact Material:
Copper alloy, post-tinned
2.0 µm min.
Polarisation, Keying,
Locking Latches:
according to RAST 5
specifications
(see customer drawings)
Track Resistance:
as per IEC 112 (250 V)
Glow Wire Test:
as per IEC 695-2-1 (850 °C)
and 750°C no flame
Air and Creepage Distance:
according to EN 60998-1
(IEC 998-1) for 380 V, ≥4.0 mm
Voltage Resistance:
according to EN 60998-1
(IEC 998-1) 1750 V for 4
minutes
Insulation Resistance:
according to EN 60998-1
(IEC 998-1) >5 MΩ
Wire Size Range:
from 0.5 to 1.5 mm2
Current Rating:
16 A max. according to wire
size
0.5 mm2 ≤3 A, 0.75 mm2 ≤6 A,
1.0 mm2 ≤10 A, 1.5 mm2 ≤16 A
Rated Voltage:
380 Volts max.
Wire Type:
H05V-K (70 °C max.)
or FR 3/2 (105 °C max.)
for 0.5–1.0 mm2 wires with
copper or tinned stranded wires
H07V-K (70 °C max.)
or FR 3/2 (105 °C max.)
for wires from 1.5mm2 with
copper or tinned stranded wires
Insulation Type:
PVC suitable for temperatures
up to 70 °C / 105 °C
Insulation Diameter Range:
2.0–3.5 mm
Temperature Range:
–25 °C up to +105 °C
Wire Extraction Force/Way:
50 N min. on wire size 0.5 mm2
Application Specification:
114-20017
Product Specification:
108-20066
Homologations:
acc.to VDE File No. 3905
(to 16 A) and UL File No.
E28476 (to 14 A)
Counter Part:
Tab 6.3 x 0.8 mm
as per DIN 46244 norms
Materials:
Copper alloy
Finishing:
Tinned (6.0 µm max.)
2021
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Keying Plan from Mating Direction
Keying Plan
2
a
1 Keying Rib
c
3 Cavity Number
3
d
–1–
2 Polarisation Rib
1
AMP MONO-SHAPE
Single Way Connector
1 Position
(Variable Keying)*
Suitable for RAST 5 Version
Colour Marking
Part
Numbers
RAST 5 Version
Packaging
Unit
On Reel
On Tray
On Reel
—
1-282086-1
1.024
10.500
—
1-282086-2
1.024
—
—
1-282086-3
1.024
—
Green
—
1-282086-4
1.024
—
Blue
—
1-282086-5
1.024
—
Violet
—
1-282086-6
1.024
—
d
d
c
– 1 –b
c
Orange
d
Black
–1–
a
c
—
–1–
On Tray
2022
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
AMP MONO-SHAPE PCB (Printed Circuit Board) Connector
PCB Connector
1
1 Cover closed after
Wire Insertion.
Wire Direction 90°.
180° when locked in
Cover Recess
2
2 Cavity Numbers
Rast 5
2
3 Keying Slot in PC Board
5
4 Locking Hole in PC Board
5 Colour Marking
4
3
Technical Features
Centerline:
5.0 mm
Configurations:
2-12 positions
Housing Material:
Plastic PA 6.6
Housing Colour:
Natural colour
Contact Material:
Copper alloy, post-tinned
2.0 µm min.
Polarisation, Keying,
Locking Latches:
according to RAST 5
specifications
(see customer drawings)
Track Resistance:
as per IEC 112 (250 V)
Glow Wire Test:
as per IEC 695-2-1 (850 °C)
and 750°C no flame
Air and Creepage Distance:
according to EN 60998-1
(IEC 998-1) for 240 V, ≥3.0 mm
Voltage Resistance:
according to EN 60998-1
(IEC 998-1) 1750 V for 4
minutes
Insulation Resistance:
according to EN 60998-1
(IEC 998-1) >5 MΩ
Wire Size Range:
from 0.5 to 0.75 mm2
Current Rating:
6 A max. according to wire size
0.5 mm2 ≤3 A, 0.75 mm2 ≤6 A
Rated Voltage:
220 Volts max.
Wire Type:
H05V-K (70 °C max.)
or FR 3/2 (105 °C max.)
for 0.5–1.0 mm2 wires with
copper or tinned stranded wires
H07V-K (70 °C max.)
or FR 3/2 (105 °C max.)
for wires from 1.5mm2 with
copper or tinned stranded wires
Insulation Type:
PVC suitable for temperatures
up to 70 °C / 105 °C
Insulation Diameter Range:
2.0–2.8 mm
Temperature Range:
–25 °C up to +105 °C
Wire Extraction Force/Way:
50 N min. on wire size 0.5 mm2
Application Specification:
114-20025
Product Specification:
108-20067
Homologations:
acc.to VDE File No. 3905
(to 6 A) and UL File No. E28476
(to 6 A)
Printed Circuit Board:
Thickness 1.5±0.2mm
Tinned Circuit Paths:
5.0mm pitch and width of
1.8mm
2023
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
AMP MONO-SHAPE PCB (Printed Circuit Board) Connector
PCB Connector
Wire Exit
1
1
2
5,0
1 PC Board
2 First Circuit Path
3
3 MONO-SHAPE Connector
4 Wire
23,0
15,0
4
14,0
Notes Concerning the PC
Board Layout
4
1
1 First circuit path
2
2 Slot for keying rib in front
of first cavity (according to
the connector 4.0 mm or
7.4 mm)
3 Bore hole for locking clip
symmetric between two
cavities (diameter 2.5 mm)
3
4 Slot for keying rib
symmetric between
two cavities
PC Board Layout
Dimensions on request.
See Customer Drawing 282042
2024
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
AMP MONO-SHAPE PCB (Printed Circuit Board) Connector
Centerline 5.0 mm
No. of Positions
Colour Marking
Part
Numbers
PC Board Cut-Out
Packaging
Unit
Loose Piece
On Reel
On Reel
Loose Piece
On Reel
1-282042-1
2-282042-1
—
5.980
3.500
—
1-282042-2
2-282042-2
3-282042-2
5.980
3.500
28.500
1-282042-3
2-282042-3
3-282042-3
5.980
3.500
28.500
1-282042-4
2-282042-4
—
5.980
3.500
—
1-282042-5
2-282042-5
3-282042-5
5.980
3.500
28.500
1-282043-2
2-282043-2
3-282043-2
4.160
2.500
24.000
1-282043-3
2-282043-3
—
4.160
2.500
—
282235-2
2-282235-2
—
4.160
2.500
—
282235-3
2-282235-3
—
4.160
2.500
—
1-1284546-1
—
—
4.160
—
—
1-282044-1
2-282044-1
3-282044-1
3.120
2.000
18.750
2
Brown
2
Rast 5
On Tray
2
Green
2
Blue
2
Red
2
Black
3
—
3
Black
3
—
3
Black
3
Blue
4
—
2025
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
AMP MONO-SHAPE PCB (Printed Circuit Board) Connector
Centerline 5.0 mm (continued)
No. of Positions
Colour Marking
Part
Numbers
PC Board Cut-Out
Packaging
Unit
On Tray
Loose Piece
On Reel
On Reel
Loose Piece
On Reel
1-282045-1
2-282045-1
3-282045-1
2.600
1.500
18.750
1-282045-2
2-282045-2
3-282045-2
2.600
1.500
18.750
1-282045-3
2-282045-3
3-282045-3
2.600
1.500
18.750
1-284733-1
2-284733-1
3-284733-1
2.600
1.500
18.750
1-282046-1
2-282046-1
3-282046-1
2.080
1.200
13.500
1-284734-1
2-284734-1
3-284734-1
2.080
1.200
13.500
1-282047-1
2-282047-1
3-282047-1
1.820
1.200
13.500
284208-1
2-284208-1
—
1.560
900
—
284574-1
—
—
1.560
—
—
1-282049-1
2-282049-1
3-282049-1
1.300
700
10.500
1-282050-1
2-282050-1
3-282050-1
1.300
700
10.500
5
—
5
Green
5
—
5
—
6
—
6
—
7
—
8
—
8
—
9
—
10
—
2026
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
AMP MONO-SHAPE PCB (Printed Circuit Board) Connector
Centerline 5.0 mm (continued)
No. of Positions
Colour Marking
Part
Numbers
PC Board Cut-Out
Packaging
Unit
Loose Piece
On Reel
On Reel
Loose Piece
On Reel
1-284401-1
—
—
1.300
—
—
284575-1
—
—
1.300
—
—
1-282051-1
2-282051-1
3-282051-1
1.040
700
10.500
1-282052-1
2-282052-1
3-282052-1
1.040
700
10.500
10
Black
2
Rast 5
On Tray
10
—
11
—
12
—
2027
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Dimensions are
millimetres over inches
Revised 5-04
AMP MONO-SHAPE Satellite Connector
Satellite Connector
1
1 Cover closed after Wire
Insertion. Wire Direction 90°.
180° when locked in Cover
Recess
2
2 Bridge between Contacts
to have Short Circuit
3 Cavity Numbers
4 For Satellite version, the
cavity 1 only accept TAB
contact, other cavities are
clogged
3
4
Technical Features
Centerline:
5.0 mm, according to RAST 5
specifications
Configurations:
3 positions only (for special
version please contact Tyco
Electronics)
Housing Material:
Plastic PA 6.6
Housing Colour:
Natural colour
Contact Material:
Copper alloy, post-tinned
2.0 µm min.
Polarisation, Keying,
Locking Latches:
according to RAST 5
specifications
(see customer drawings)
Track Resistance:
as per IEC 112 (250 V)
Glow Wire Test:
as per IEC 695-2-1 (850 °C)
and 750°C no flame
Air and Creepage Distance:
according to EN 60998-1
(IEC 998-1) for 380 V, ≥4.0 mm
Voltage Resistance:
according to EN 60998-1
(IEC 998-1) 1750 V for 4
minutes
Insulation Resistance:
according to EN 60998-1
(IEC 998-1) >5 MΩ
Wire Size Range:
from 0.5 to 1.5 mm2
Current Rating:
16 A max. according to
wire size
0.5 mm2 ≤3 A, 0.75 mm2 ≤6 A,
1.0 mm2 ≤10 A, 1.5 mm2 ≤16 A
Rated Voltage:
380 Volts max.
Wire Type:
H05V-K (70 °C max.)
or FR 3/2 (105 °C max.)
for 0.5–1.0 mm2 wires with
copper or tinned stranded wires
H07V-K (70 °C max.)
or FR 3/2 (105 °C max.)
for wires from 1.5mm2 with
copper or tinned stranded wires
Insulation Type:
PVC suitable for temperatures
up to 70 °C / 105 °C
Insulation Diameter Range:
2.0–3.5 mm
Temperature Range:
–25 °C up to +105 °C
Wire Extraction Force/Way:
50 N min. on wire size 0.5 mm2
Application Specification:
114-20026
Product Specification:
108-20070
Homologations:
acc.to VDE File No. 3905
(to 16 A) and UL File No.
E28476 (to 14 A)
2028
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Keying Plan from Mating Direction
4 Cavity Number
– 5 –b
2
c
–4–
c
3 Polarisation Rib
–3–
2 Keying Rib
–2–
a
–1–
1 Locking Latch
–7–
3
4
–6–
Keying Plan
Rast 5
2
1
AMP MONO-SHAPE - 3 Position Satellite Connector
(Variable Keying)*
–3–
Packaging
Unit
On Tray
Loose Piece
On Reel
On Reel
Loose Piece
On Reel
1-282099-1
—
—
4.160
—
—
d
–2–
d
c
Black
– 1 –b
03-A
03-I
Part
Numbers
RAST 5 Version
c
Suitable for RAST 5 Version
Colour Marking
02-L
02-P
– 2 –b
—
—
—
284288-2
—
—
3.000
—
1-284288-3
284288-3
—
6.500
3.000
—
—
284288-4
—
—
3.000
—
—
284288-5
—
—
3.000
—
1-284288-6
284288-6
—
6.500
3.000
—
—
284288-7
—
—
3.000
—
d
6.500
– 2 –b
d
–1–
c
d
– 2 –b
c
–1–
—
c
– 2 –b
d
– 2 –b
–2–
—
d
02-C
–1–
a
Black
284288-1
d
Violet
– 2 –b
02-L
02-P
1-284288-1
d
Green
–1–
02-L
02-P
–1–
Blue
–1–
02-L
02-P
c
Orange
c
02-L
02-P
c
—
c
02-L
02-P
–1–
AMP MONO-SHAPE - 2 Position Satellite Connector
(Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2 to have Short Circuit
* Final keying version is produced on the Application Tooling Machines.
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
2029
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Keying Plan from Mating Direction
AMP MONO-SHAPE Bridge Connector - 3 Position RAST 5 Variation
(Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3 to have Short Circuit
–3–
Packaging
Unit
On Tray
Loose Piece
On Reel
On Reel
Loose Piece
On Reel
—
284289-1
—
—
2.500
—
d
–2–
d
c
Green
– 1 –b
03-A
03-I
Part
Numbers
RAST 5 Version
c
Suitable for RAST 5 Version
Colour Marking
AMP MONO-SHAPE Bridge Connector - 6 Position RAST 5 Variation
(Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3 to have Short Circuit
Suitable for RAST 5 Version
Colour Marking
Part
Numbers
RAST 5 Version
Packaging
Unit
On Tray
Loose Piece
On Reel
On Reel
Loose Piece
On Reel
—
284290-1
—
—
1.200
—
—
Green
AMP MONO-SHAPE Bridge Connector - 6 Position RAST 5 Variation
(Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2 and 3-4 to have Short Circuit
Suitable for RAST 5 Version
Colour Marking
Part
Numbers
RAST 5 Version
Packaging
Unit
On Tray
Loose Piece
On Reel
On Reel
Loose Piece
On Reel
—
284290-2
—
—
1.200
—
—
Black
AMP MONO-SHAPE Bridge Connector - 6 Position RAST 5 Variation
(Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3-4-5-6 to have Short Circuit
Suitable for RAST 5 Version
Colour Marking
Part
Numbers
RAST 5 Version
Packaging
Unit
On Tray
Loose Piece
On Reel
On Reel
Loose Piece
On Reel
1-284744-1
—
—
2.080
—
—
—
—
* Final keying version is produced on the Application Tooling Machines.
2030
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Dimensions are
millimetres over inches
Revised 5-04
Introduction
AMP MONO-SHAPE
MARK II Connectors in
In-Line Mating Technology
MONO-SHAPE Mark II
Connector System was
developed according to the
newest level of knowledge and
standard.
2
Rast 5
The requirements of advanced
In-Line mating technology for
the component and contact of
printed circuit board (PCB) is
granted by the two versions
TAB and PCB connector
systems.
System is designed to
maximise the full integration
with the application tooling,
assuring the flexibility in the
harness design.
This system is suitable for a
wide wire size range of
conductor and current carrying
capacity up to 16 A.
Double termination is possible
with 0.5 and 0.5mm2 or 0.5 and
0.75mm2 conductors.
(See application spec.
114-20104 for details)
The connectors are available in
1 to 10 positions (TAB Version)
with interior locking device and
2 to 12 positions (PCB Version)
Connectors are supplied in
chain and provided with all
keying and polarisation ribs the
connectors can be handled
automatically with a modern
Application Tooling Equipment.
Wiring faults checked and
eliminated through high
automation.
Technical Features
■ Housing moulded in different
materials for different
applications
■ Standard, Part Numbers with
pre-dash 0 (as 0-284471-1)
Housing in unfilled PA 6/6,
UL 94V-2
■ For UL94V0, Part Numbers
with pre-dash 1
(as 1-284471-1)
Housing in unfilled PA 6/6,
UL 94V-0
■ High Operating Temperature
(up to 130°), Part Numbers
with pre-dash 2 (as 2284471-1) Unfilled PA 4/6,
UL 94V-2 (available for TAB
Version only)
■ Glow Wire 750° no flame,
Part Numbers with pre-dash
3 (as 3-284471-1) Housing
in unfilled PA 6, UL 94V-2
Application Machines shall
provide to print a colour code
mark on the connectors cover
after wire termination, feasible
on all connectors configuration,
for connector identification on
harnesses.
2031
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Dimensions are
millimetres over inches
Revised 5-04
Technical Data
Centerline:
5.0mm
Current Voltage:
250 V~
Housing Material:
Polyamide, PA 6.6 and PA 6
Air and Creepage Distance:
>3.2mm
Approvals:
VDE, UL CSA applied
Flammability Rating:
According UL 94 V-2
Standard Colour:
Natural
TAB Connectors
1-10 position 5.0 pitch
connectors with insulation
displacement contacts mateable
with components according to
rast 5 and with tinned copper
alloy tab contacts 6.3 x 0.8mm
according to DIN 46244 and
DIN 17670 Part 1.
TAB-BRIDGE Connectors
Same design as TAB
Connectors but with a bridge
between two adjacent contacts
to have a Short Circuit between
them.
Wire Size Range:
0.35–1.5 mm2
Current Rating:
16 Ampere max. acc. to
wire size used
PCB Connectors
2–12 position 5.0 mm pitch
connectors with insulation
displacement contacts mateable
with printed circuit boards
(PCB)
Wire Size Range:
0.35–0.75 mm2
Current Rating:
6 Ampere max. acc. to
wire size used
PC Board:
Single or double side, with
thickness 1.6±0.2mm, FR4, 2 x
0.35 µm Copper 5µm tinned
tracks, 5.0mm pitch
2032
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Keying Plan and Cable Exit
Keying Plan
from Mating Direction,
Fully Keyed Version
3
4
1 Locking Latch
2
2 Keying Rib
3 Polarisation Rib
Rast 5
4 Cavity Number
5 Motor Mount
Special Keying
1
2
5
Example of
Keyed Version:
05-C
This final keying version
will be produced on the
Application Tooling
Equipment
Cable Exit
3
1 Double Wire Exit
9
4
2 Wire Exit 90°
3 Wire Exit 180°
4 Cover
5 Interior Locking Latch
(for TAB Version only)
6 Keying
7 Polarisation
2
8 Motor Mount
Special Keying
1
9 Colour Marking Area to
identify connectors after
harnesses are built up
5
6
7
8
2033
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
TAB Connector System
AMP MONO-SHAPE MARK II
TAB Connector System
No. of Positions:
1 to 10 positions
Insulation Diameter:
3.0mm max.
Product Specification:
108-20213
Contact Material:
CuNi2Si
Insulation Resistance:
>10 MΩ
Application Specification:
114-20104
Contact Finish:
Tin Plated
Wire Size Range:
0.35-1.5mm2
Current Rating:
16 A, up to 4 contacts 16 A
Temperature Range:
-40°C up to +130°C
Part Numbers
No. of Positions
Colour Marking
as Shipped
RAST 5 Version
High
Glow Wire
Packaging
Temperature 750° no flame
Unit
Standard
UL94V0
0-284471-1
1-284471-1
2-284471-1
3-284471-1
11000
0-284472-1
1-284472-1
2-284472-1
3-284472-1
5500
0-284473-1
1-284473-1
2-284473-1
3-284473-1
3520
0-284473-2
1-284473-2
2-284473-2
3-284473-2
3520
0-284474-1
1-284474-1
2-284474-1
3-284474-1
2640
0-284474-2
1-28444-2
2-284474-2
3-284474-2
2640
0-284475-1
1-284475-1
2-284475-1
3-284475-1
2200
0-284476-1
1-284476-1
2-284476-1
3-284476-1
1760
0-284476-4
1-284476-4
2-284476-4
3-284476-4
1760
0-284477-1
1-284477-1
2-284477-1
3-284477-1
1540
1
—
2
—
3
—
3
Blue
4
—
4
Blue
5
—
6
—
6
Violet
7
—
2034
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
TAB Connector System (continued)
AMP MONO-SHAPE MARK II
TAB Connector System
2
Colour Marking
as Shipped
Rast 5
Part Numbers
No. of Positions
RAST 5 Version
High
Glow Wire
Packaging
Temperature 750° no flame
Unit
Standard
UL94V0
0-284477-2
1-284477-2
2-284477-2
3-284477-2
1540
0-284477-3
1-284477-3
2-284477-3
3-284477-3
1540
0-284478-1
1-284478-1
2-284478-1
3-284478-1
1320
0-284478-2
1-284478-2
2-284478-2
3-284478-2
1320
0-284480-1
1-284480-1
2-284480-1
3-284480-1
1100
7
Blue
7
Red
8
—
8
Blue
10
—
2035
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
TAB-BRIDGE Connector System - Short Circuit
AMP MONO-SHAPE MARK II
TAB-BRIDGE Connector
System - Short Circuit
No. of Positions
Colour Marking
as Shipped
RAST 5 Version
Part Numbers
Bridge
Between
Cavity
Numbers
Standard
UL94V0
1-2
0-284472-2
1-284472-2
2-284472-2
3-284472-2
5500
1-2
0-284473-3
1-284473-3
2-284473-3
3-284473-3
3520
1-2-3
0-284476-2
1-284476-2
2-284476-2
3-284476-2
1760
1-2
0-284476-3
1-284476-3
2-284476-3
3-284476-3
1760
7-8
0-284480-2
1-284480-2
2-284480-2
3-284480-2
1100
High
Glow Wire
Packaging
Temperature 750° no flame
Unit
2
Blue
3
Red
6
Blue
6
Red
10
Blue
2036
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
PCB Connector System
No. of Positions:
2 to 12 positions
Insulation Diameter:
2.8mm max.
Product Specification:
108-20214
Contact Material:
Brass
Insulation Resistance:
>10 MΩ
Application Specification:
114-20104
Contact Finish:
Tin Plated
Wire Size Range:
0.35-0.75mm2
Current Rating:
6 A max.
Temperature Range:
-40°C up to +105°C
2
Rast 5
AMP MONO-SHAPE MARK II
PCB Connector System
wire exit
4
3
1 PC Board
3
2 First Circuit Path
3 MONO-SHAPE Connector
4 Wire
1
2
Notes Concerning the PC
Board Layout
See also Customer Drawing
284482 and Drawing
93-330805-2 for Test PCB
Layout
2
1
4
1 First circuit path, mate with
Connector way No. 1
2 Slot for connector keying rib
Adjacent to first and/or last
way
Based on connector design,
for 3.5mm or 7.5mm length
2
3
3 Hole for locking clip,
symmetric
Between two ways
(diameter 2.5)
4 Slot for connector keying rib
symmetric between two
ways. Position based on
connector design, for
7.5mm length
2037
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
PCB Connector System (continued)
AMP MONO-SHAPE MARK II
PCB Connector System
Part Numbers
No. of Positions
Colour Marking
as Shipped
RAST 5 Version
Glow Wire
Packaging
750° no flame
Unit
Standard
UL94V0
0-284482-1
1-284482-1
3-284482-1
5500
0-284482-2
1-284482-2
3-284482-2
5500
0-284482-3
1-284482-3
3-284482-3
5500
0-284482-4
1-284482-4
3-284482-4
5500
0-284482-5
1-284482-5
3-284482-5
5500
0-28482-6
1-284482-6
3-284482-6
5500
0-284483-1
1-284483-1
3-284483-1
3520
0-284483-2
1-284483-2
3-284483-2
3520
0-284483-3
1-284483-3
3-284483-3
3520
0-284483-4
1-284483-4
3-284483-4
3520
0-284484-1
1-284484-1
3-284484-1
2640
2
Green
2
Black
2
Violet
2
Orange
2
Grey
2
Red
3
Green
3
Black
3
Violet
3
Orange
4
Green
2038
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
PCB Connector System (continued)
AMP MONO-SHAPE MARK II
PCB Connector System
Part Numbers
No. of Positions
Colour Marking
as Shipped
RAST 5 Version
Glow Wire
Packaging
750° no flame
Unit
UL94V0
0-284484-2
1-284484-2
3-284484-2
2640
0-284484-3
1-284484-3
3-284484-3
2640
0-284485-1
1-284485-1
3-284485-1
2200
0-284485-2
1-284485-2
3-284485-2
2200
0-284485-3
1-284485-3
3-284485-3
2200
0-28485-4
1-284485-4
3-284485-4
2200
0-284486-1
1-284486-1
3-284486-1
1760
0-284486-2
1-284486-2
3-284486-2
1760
0-284486-3
1-284486-3
3-284486-3
1760
0-284486-4
1-284486-4
3-284486-4
1760
0-284486-5
1-284486-5
3-284486-5
1760
2
Rast 5
Standard
4
Black
4
Violet
5
Green
5
Black
5
Violet
5
Orange
6
Green
6
Black
6
Violet
6
Orange
6
Grey
2039
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
PCB Connector System (continued)
AMP MONO-SHAPE MARK II
PCB Connector System
Part Numbers
No. of Positions
Colour Marking
as Shipped
RAST 5 Version
Glow Wire
Packaging
750° no flame
Unit
Standard
UL94V0
0-284487-1
1-284487-1
3-284487-1
1540
0-284487-2
1-284487-2
3-284487-2
1540
0-284487-3
1-284487-3
3-284487-3
1540
0-284488-1
1-284488-1
3-284488-1
1320
0-284488-2
1-284488-2
3-284488-2
1320
0-28488-3
1-284488-3
3-284488-3
1320
0-284488-4
1-284488-4
3-284488-4
1320
0-284489-1
1-284489-1
3-284489-1
1100
0-284489-2
1-284489-2
3-284489-2
1100
0-284489-3
1-284489-3
3-284489-3
1100
0-284489-4
1-284489-4
3-284489-4
1100
7
Green
7
Black
7
Violet
8
Green
8
Black
8
Violet
8
Orange
9
Green
9
Black
9
Violet
9
Orange
2040
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
PCB Connector System (continued)
AMP MONO-SHAPE MARK II
PCB Connector System
Part Numbers
No. of Positions
Colour Marking
as Shipped
RAST 5 Version
Glow Wire
Packaging
750° no flame
Unit
UL94V0
0-284490-1
1-284490-1
3-284490-1
1100
0-284490-2
1-284490-2
3-284490-2
1100
0-284491-1
1-284491-1
3-284491-1
880
0-284491-2
1-284491-2
3-284491-2
880
0-284491-3
1-284491-3
3-284491-3
880
0-28492-1
1-284492-1
3-284492-1
880
0-284492-2
1-284492-2
3-284492-2
880
0-284492-3
1-284492-3
3-284492-3
880
2
Rast 5
Standard
10
Green
10
Black
11
Green
11
Black
11
Violet
12
Green
12
Black
12
Violet
2041
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Application Tooling
Entry Level Semi-Automatic
IDC Bench Machines
SIM 500P
Part No. 528376-2
In the Entry Level concept, the
application process is shared by
two different semi-automatic
machines.
The SIM 500P prepares the
AMP multifitting Mark II bandoliered IDC connectors. The
machine removes the connector
from the chain and cuts the
keying ribs.
SIM 500T
Part No. 528377-2
SIM 500P
Next, the prepared IDC
connectors are applied by the
SIM 500T.
To facilitate this, the individual
IDC connectors are loaded into
a nest and moved automatically
into the termination station.
The manually inserted wires
are, according to a program,
terminated into the appropriate
insulation displacement slots.
The cover is then separated
from the housing, turned and
pushed into final position.
The nest, including the finished
harness module, is removed
from the easily accessed track.
SIM 500T
Technical Features
Technical Data
Technical Features
Technical Data
■ Processing of all versions of
the AMP multifitting Mark II
connector system with only
minor set up changes.
Power Supply:
230 V AC, 50 Hz
■ Application of all versions of
the AMP multifitting Mark II
connector, with only minor
set up changes.
■ Termination of the wire with
active support of the IDC
contact.
■ Termination of two wires
(double wire termination)
programmable.
■ Connector fixture,
incorporating three nests for
max. 12 positions each.
■ Accessible and easily
interchangeable mechanical
program rail.
■ By utilising several
connector fixtures and
program rails, output and set
up times can be optimised.
■ Simple operator interface.
Power Supply:
230 V AC, 50 Hz
■ Cutting and reliable removal
of the reel clips.
■ Cutting and reliable removal
of the coding and
polarisation ribs by means of
a preset cutting block.
Air Pressure:
6 bar
Cycle Time:
approx. 4 s / connector package
(without handling time)
■ Nest capacity
per machine cycle
– one connector 4- to 8-pos.
– two connectors 2- and
3-pos.
– four connectors 1-position
■ Integrated monitoring of the
connector supply.
■ Simple operator interface.
Air Pressure:
6 bar
Cycle Time:
approx. 1.2 s / line
(without handling time)
2042
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Application Tooling (continued)
IDC Workstation –
SIM 50
This semi-automatic machine
was designed for the sequential
processing of AMP multifitting
Mark II IDC connector system
and its variations such as direct
and indirect mating connector
with interior or exterior locking.
2
Rast 5
A processing sequence can
consist of one or more IDC connectors of the same or different
numbers of positions, but a
maximum total of 12 positions.
The specific key coding of the
connectors is performed during
the termination process by an
integrated cutting device.
The wires are manually fed into
the machine and then
automatically terminated.
Integrated control tests ensure
a high quality product.
Technical Features
■ Processing of all versions of
the AMP multifitting Mark II
connector system without
additional set up time.
■ Termination of the wire with
active support of the IDC
contact.
■ Termination of two wires
in the same slot is
programmable.
■ Colour coding on the
connector cover possible.
Technical Data
■ 50 different production
programs can be stored.
Power Supply:
230 V AC, 50 Hz
■ Operator PC interface
displaying machine status
and production data;
different languages available.
Air Pressure:
6 bar
■ Low maintenance costs and
the capability of off-site
troubleshooting via modem.
Insulation Diameter Range:
1.2 mm up to 3.0 mm
■ Ergonomic and easy to operate through a Touch Screen
Display.
Wire Size Range:
0.35 mm2 up to 1.5 mm2
Wire Type:
Stranded conductors
■ Wire exit angle can be bent
180°.
■ Short set up and changeover times.
■ High output.
■ Correct wire insertion length
and key codings are
continually checked.
■ Good / bad sorter; faulty
connections will be destroyed.
Processing Modules of the SIM 50
2043
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Application Tooling (continued)
Flexible Harness Maker –
FHM
The FHM is a fully-automatic
machine featuring modular set
up. It is built to manufacture
harnesses by processing both
IDC connectors and crimp
terminals.
The basic machine includes a
12 wire selector, a station that
cuts the wires to length, a
stripping station, a doublecrimp unit, two crimping
presses and wire end ejector for
doubling and daisy chains.
A gripper unit takes the wire
from the base machine and
transfers it to the attached IDC
station. Sequential processing
allows the manufacturing of
cross-overs and bridges as well
as double-crimps, depending
on the type of IDC connector
used.
The IDC workstations are easily
reconfigured for processing our
different IDC connector
systems. They include all the
necessary processing
operations for IDC termination
with minimum change-over and
set up times.
Quality checks integrated in the
manufacturing process ensure
the highest quality harness for
every production run.
Technical Features
■ Manufacturing of harnesses
with 2.5 mm pitch IDC connectors and/or 5.0 mm pitch
IDC connectors and/or with
crimp terminals.
■ IDC Workstations are
available for the following
connector systems:
● AMP DUOPLUG 2.5
● AMP DUOPLUG 2.5
Mark II
● AMP DUOPLUG Power
● AMP multifitting Mark II
● AMP MONO-SHAPE
Mark II
■ The IDC Workstations can
also be used as separate
semi-automatic machines
with manual wire transfer.
Technical Data
■ Integrated test equipment
checks the coding and the
insertion depth of the wire,
and performs a continuity
test. A spark testing unit is
also available as an option.
■ Wire printing and single
housing insertion possible.
■ Operator PC interface
displays machine status and
production data; different
languages available.
■ Low maintenance costs and
the capability of off-site
troubleshooting via modem.
Power Supply:
400 V AC, 50 Hz
Air Pressure:
6 bar
Wire Size Range:
0.22 mm2 up to 1.5 mm2
Wire Length:
220 mm up to 2,500 mm
Insulation Diameter Range:
1.2 mm up to 3.0 mm
Wire Type:
Stranded conductors
■ Ergonomic and easy to
operate through a Touch
Screen Display.
■ The specific key coding of
the IDC connector is done on
the IDC Workstation.
2044
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
METRIC Catalogue 1654742
Revised 5-04
Dimensions are
millimetres over inches
Application Tooling (continued)
IDC Harness Maker –
IHM Mark III
The new IHM Mark III is a very
high performance, fullyautomatic machine designed to
manufacture parallel jumper
harnesses using IDC technology.
2
Rast 5
The simultaneous feeding of up
to 21 wires guarantees high
productivity and flexibility and a
choice of 2.5 mm or 5.0 mm
pitch IDC systems.
The gripper unit on the left side
of the machine is able to spread
the wires in both directions to
enable the production of harnesses using both 2.5 mm and
5.0 mm pitch connectors at the
same time.
Available options are a stripper
crimper unit with an integrated
crimp force analyser and a
good/bad sorting unit.
The IDC workstations are easily
reconfigured for processing our
different IDC connector
systems. They include all the
necessary processing
operations for IDC termination
with minimum change-over
and set up times.
Quality checks integrated in the
manufacturing process ensure
the highest quality harness for
every production run.
Technical Features
Technical Data
■ Manufacturing of harnesses
using 2.5 mm and/or 5.0 mm
pitch IDC systems.
■ The specific key coding of
the IDC connector is done on
the IDC Workstation.
■ Very short wire length is
possible.
■ Integrated test equipment
checks the coding and the
insertion depth of the wire,
and performs a continuity
test. A spark testing unit is
also available as an option.
■ Option available to produce
harnesses with crimp
terminals on one side.
■ IDC Workstations are
available for the following
connector systems:
● AMP DUOPLUG 2.5
● AMP DUOPLUG 2.5
Mark II
● AMP DUOPLUG Power
● AMP multifitting Mark II
● AMP MONO-SHAPE
Mark II
■ Operator PC interface
displays machine status and
production data; different
languages available.
■ Low maintenance costs and
the capability of off-site
troubleshooting via modem.
Power Supply:
400 V AC, 50 Hz
Air Pressure:
6 bar
Wire Size Range:
0.22 mm2 up to 1.5 mm2
Wire Length:
125 mm up to 2,200 mm
Insulation Diameter Range:
1.2 mm up to 3.0 mm
Wire Type:
Stranded conductors
■ Ergonomic and easy to
operate through a Touch
Screen Display.
● AMP MT Edge
2045
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Introduction
AMP Standard Timer
Connectors in In-Line
Mating Technology
AMP Standard Timer
connectors according to RAST
5.0 mm standard have been
developed to connect RAST 5
components (like motors,
leach pumps, water level
regulators, relays and
push-button switches) in the
Household Appliances Industry.
They meet industry
requirements, for example
multiple position connectors,
secure connection even at
inclining mating as well as a
sturdy contact design.
AMP Standard Power Timer
contacts, for use with Standard
Timer housings, are suitable for
high density and high current
capacity up to 16 A.
Housing is designed for
end-to-end stacking without
contact loss. They are available
in different keying and locking
versions from 2- positions to
12-positions.
Standard Timer contacts can be
used with stranded wires from
0.5 mm 2 to 2.5 mm 2 and can
be double terminated. Of course,
the corresponding tooling is
available, too.
AMP Standard Timer
connectors are tested by VDE
and fulfil all requirements acc.
to VDE 0700 (air gap, creepage
distance, glow wire test, ball
pressure test, creepage current
strength).
UL recognised component.
Technical Features
Centerline:
5.0 mm
Available Number of Positions:
2- to 12-positions
Housing Material:
Polyamide PA 6.6
Contact Material:
CuSn, CuFe
Contact Finish:
Tin Plated, Silver Plated
Wire Size Range:
from 0.5 to 2.5mm2
Wire Size Diameter:
from 2.0 to 3.3mm
Temperature Range:
-40°C to +110°C
Current Voltage:
220 V~
Current Rating:
max. 16 A
Standard Timer: 6 A
Power Timer: 16 A
Mating Force Contact:
≤ 15 N
Unmating Force:
≤8N
Air and Creepage Distance:
≥ 3.0mm
Track Resistance:
PTI 250
Glow Wire Test:
850°C
Contacts made for Tabs
according:DIN 46244
(6.3 x 0.8mm / 4.8 x 0.8mm)
DIN 46343 Part 2 and 3
2046
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Interior and Exterior Locking
Interior Locking
Mating Direction
Connection to the Components
according RAST 5 Standard
1
1 Connected Timer Contact
2 Standard Timer Housing
with Interior Locking
2
6
Rast 5
3 Keying
4 Polarisation
5 Locking Latch
3
6 Cover (Secondary Locking)
4
7 RAST 5 Tab Array
5
2
7
Exterior Locking
Connection to the Components
according RAST 5 Standard
Mating Direction
1
1 Connected Timer Contact
2 Standard Timer Housing
with Exterior Locking
3 Keying
4 Polarisation
5
5 Locking Latch
2
6 RAST 5 Tab Array
3
4
6
2047
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Keying Plan and Housings
6
4 Slanted Keying Rib
–7–
– 5 –b
–4–
c
c
3 Keying Rib between Cavity
–3–
2 Keying Rib
d
–1–
1 Locking Latch
–2–
a
5
–6–
Keying Plan
from Mating Direction
5 Polarisation Rib
6 Cavity Number
1
2
4
3
AMP Standard Timer Housings
2 Position Rast 5 Variations
Keying Version
Colour
Part
Numbers
2-928344-2
0-928247-2
2.500 / 3.000
3-964951-2
8-928247-2
2.500 / 2.500
—
0-964983-2
2.500
6-928344-2
5-928247-2
2.500 / 2.500
5-928344-2
2-964983-2
2.500 / 2.500
3-928344-2
—
2.500
2-964951-2
3-928247-2
2.500 / 2.500
d
– 2 –b
–2–
a
2.500 / 2.500
a
– 1 –b
c
Grey
d
–1–
02-C
–2–
a
c
Black
6-928247-2
–2–
–1–
02-B
928344-2
– 2 –b
Natural
with Exterior Locking
c
02-A
Packaging
Unit
with Interior Locking
a
– 1 –b
RAST 5 Version
02-D
a
c
Blue
–1–
02-E
– 2 –b
– 2 –b
a
– 1 –b
– 1 –b
d
Violet
– 2 –b
02-G
a
– 1 –b
d
Green
02-H
d
Brown
02-I
c
Orange
Bold Part Numbers are Preferred Types
2048
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Housings
AMP Standard Timer Housings
2 Position Rast 5 Variations (continued)
Keying Version
Colour
Part
Numbers
RAST 5 Version
4-928247-2
2.500
– 2 –b
0-928343-2
—
3.000
–2–
—
3-964983-2
2.500
–2–
a
–2–
—
0-964951-2
2-928247-2
2.500 / 2.500
—
7-928247-2
2.500
4-928344-2
—
2.500
2
c
Yellow-Green
Rast 5
–1–
02-K
with Exterior Locking
– 2 –b
a
with Interior Locking
Packaging
Unit
–1–
02-L
–1–
02-M
02-O
02-Q
c
Turquoise
–2–
– 1 –b
c
Purple
d
–1–
02-P
d
c
Pink
a
– 1 –b
c
Ultramarine-Blue
d
a
Natural
Bold Part Numbers are Preferred Types
AMP Standard Timer Housings
2 Position Special Variations
Colour
Part
Numbers
Version
–2–
–1–
Natural
with Exterior Locking
7-927740-2
9-928247-2
5.000
– 2 –b
Natural
–1–
with Interior Locking
Packaging
Unit
0-964768-1
—
5.000
2049
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Housings
AMP Standard Timer Housings
3 Position Rast 5 Variations
Keying Version
Colour
Part
Numbers
RAST 5 Version
–3–
—
3.000
– 3 –b
—
0-964983-3
2.500
—
3-928247-3
2.500
2-928247-3
2.500
4-928247-3
2.500
2-964983-3
2.500
–1–
03-D
–2–
–3–
– 2 –b
–3–
–2–
– 3 –b
–1–
—
—
c
—
–1–
Violet
–1–
03-G
a
a
c
Blue
–2–
a
d
c
Black
0--928344-3
–3–
–1–
03-B
– 2 –b
c
Natural
–2–
03-A
with Exterior Locking
d
– 1 –b
with Interior Locking
Packaging
Unit
03-H
03-K
c
Yellow-Green
d
d
Brown
Bold Part Numbers are Preferred Types
2050
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Housings
AMP Standard Timer Housings
3 Position Special Variations
Colour
Part
Numbers
Version
with Exterior Locking
–3–
–2–
–3–
–2–
–1–
Grey
02-928343-3
—
3.000
–3–
– 2 –b
–1–
Yellow
3.000
3-928343-3
—
3.000
– 3 –b
–2–
–1–
Grey
—
—
0-928247-3
2.000
—
2.500
5-928247-3
2.500
2
d
–2–
–3–
–3–
—
–1–
c
2-928344-3
–2–
a
d
a
–1–
Black
0--928343-3
Rast 5
Natural
–1–
a
with Interior Locking
Packaging
Unit
Natural
Bold Part Numbers are Preferred Types
2051
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Housings
AMP Standard Timer Housings
4 Position Rast 5 Variations
Keying Version
Colour
Part
Numbers
RAST 5 Version
–4–
5-928247-4
1.250
0-928247-4
2.000 / 1.250
—
2-928247-4
1.250
—
3-928247-4
1.250
d
2.000 / 1.250
–2–
–3–
– 4 –b
–3–
– 4 –b
3-928344-4
a
c
Black
4-928247-4
—
a
–1–
04-B
with Exterior Locking
928344-4
–2–
c
Natural
–3–
04-A
–2–
– 1 –b
with Interior Locking
Packaging
Unit
–1–
04-C
–4–
–1–
03-G
d
Violet
–2–
a
d
– 4 –b
a
–3–
White
–3–
–1–
04-F
–2–
a
d
Grey
AMP Standard Timer Housings
4 Position Special Variations
Colour
Part
Numbers
Version
–3–
–3–
–4–
– 3 –b
–2–
–2–
—
2.500
–4–
–2–
–1–
Black
0--928343-4
02-928343-4
—
2.500
–4–
–1–
Black
with Exterior Locking
3-928344-4
—
2.500
d
a
Natural
–1–
with Interior Locking
Packaging
Unit
Bold Part Numbers are Preferred Types
2052
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Housings
AMP Standard Timer Housings
5 Position Rast 5 Variations
Keying Version
Colour
Part
Numbers
RAST 5 Version
–5–
2-928247-5
1.000
–5–
–4–
—
—
3-928247-5
1.000
2
–4–
–3–
d
Blue
–2–
05-D
–1–
a
a
d
–3–
with Exterior Locking
Rast 5
Black
– 2 –b
05-B
–1–
with Interior Locking
Packaging
Unit
AMP Standard Timer Housings
5 Position Special Variations
Colour
Part
Numbers
Version
–3–
–4–
– 5 –b
–3–
– 4 –b
–5–
02-928343-5
–3–
–4–
–5–
—
– 3 –b
–4–
–5–
–4–
–2–
–1–
–2–
Green
–1–
– 2 –b
Yellow
–1–
–2–
Natural
with Exterior Locking
1.000
—
1.000
5-928247-5
1.250
—
4-928247-5
1.250
—
6-928247-5
1.250
–5–
d
c
–2–
a
c
d
—
d
–1–
Black
d
Natural
–1–
a
0--928343-5
–3–
with Interior Locking
Packaging
Unit
Bold Part Numbers are Preferred Types
2053
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Housings
AMP Standard Timer Housings
6 Position Rast 5 Variations
Keying Version
Colour
Part
Numbers
RAST 5 Version
964983-6
2.500
928247-6
1.000
2-928247-6
1.000
3-928247-6
1.000
–5–
–6–
—
–5–
– 6 –b
—
–5–
– 6 –b
—
c
Grey
—
a
c
06-C
with Exterior Locking
d
–6–
–4–
–5–
–4–
–3–
–4–
–3–
–3–
–2–
–4–
–2–
–2–
–3–
– 1 –b
– 1 –b
Natural
– 2 –b
06-A
–1–
with Interior Locking
Packaging
Unit
06-D
06-E
d
Green
–1–
a
d
Blue
Bold Part Numbers are Preferred Types
2054
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Housings
AMP Standard Timer Housings
6 Position Special Variations
Colour
Part
Numbers
Version
–1–
–2–
–3–
–4–
–5–
– 6 –b
– 1 –b
–2–
–3–
–4–
–5–
–6–
–1–
–2–
–3–
–4–
–5–
–6–
928151-6
– 1 –b
–2–
–4–
–5–
–6–
—
– 1 –b
–2–
–4–
–5–
–6–
—
–1–
–2–
–4–
–5–
–6–
—
– 1 –b
–2–
–3–
–4–
–5–
–6–
—
–3–
–4–
–5–
–6–
2-928344-6
– 5 –b
–6–
3-928344-6
Beige
Yellow
Brown
Natural
Natural
—
1.000
—
1.000
—
1.500
7-928247-6
1.000
4-928247-6
1.000
5-928247-6
1.000
6-928247-6
1.000
—
1.500
—
1.500
2
d
Natural
–4–
–2–
– 3 –b
d
c
c
Green
–1–
a
c
d
c
d
c
–3–
c
–3–
a
c
–3–
c
Black
– 1 –b
2-928343-6
Natural
with Exterior Locking
Rast 5
928343-6
–2–
with Interior Locking
Packaging
Unit
Bold Part Numbers are Preferred Types
2055
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Housings
AMP Standard Timer Housings
7 Position Rast 5 Variations
Keying Version
Colour
Part
Numbers
RAST 5 Version
–6–
–6–
with Exterior Locking
928151-7
—
1.300
—
928247-7
700
d
–7–
c
–7–
–5–
– 5 –b
–4–
–4–
d
–3–
–3–
c
d
Grey
–2–
07-C
–2–
Natural
–1–
07-A/S
–1–
with Interior Locking
Packaging
Unit
AMP Standard Timer Housings
7 Position Special Variations
Colour
Part
Numbers
Version
–4–
–5–
–6–
–4–
–5–
–6–
–4–
–5–
– 6 –b
– 5 –b
–6–
—
500
2-928343-7
—
500
928344-7
—
500
—
2-928247-7
800
2-928151-7
4-928247-7
Green
Natural
—
5-928247-7
1.000
—
6-928247-7
1.000
–4–
–5–
–6–
–4–
–5–
–6–
– 7 –b
–4–
–5–
–6–
–7–
1.300 / 1.000
d
c
–2–
a
d
d
c
–7–
–3–
– 3 –b
d
–3–
d
–7–
c
d
–4–
–7–
–3–
–3–
–3–
–2–
–3–
–2–
– 2 –b
–1–
Natural
–1–
a
–1–
–1–
Natural
928343-7
–7–
–2–
–2–
–2–
–1–
Blue
c
Natural
with Exterior Locking
–7–
–1–
Black
a
Natural
– 1 –b
with Interior Locking
Packaging
Unit
Bold Part Numbers are Preferred Types
2056
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Housings
AMP Standard Timer Housings
8 Position Rast 5 Variations
Keying Version
Colour
Part
Numbers
RAST 5 Version
–8–
–7–
–6–
—
928247-8
800
2
d
c
–5–
–4–
–3–
–2–
with Exterior Locking
Rast 5
Blue
d
c
08-D
–1–
with Interior Locking
Packaging
Unit
AMP Standard Timer Housings
8 Position Special Variations
Colour
Part
Numbers
Version
–5–
–6–
–7–
–4–
–5–
–6–
–7–
–4–
–5–
–6–
–7–
–4–
–5–
–6–
–7–
–8–
–4–
–3–
–3–
–3–
1.000
–8–
–3–
–2–
–2–
–2–
—
2-928343-8
—
1.000
– 8 –b
–2–
–1–
Grey
928343-8
3-928343-8
—
1.000
–8–
–1–
Black
with Exterior Locking
—
2-928247-7
800
d
d
Natural
–1–
a
Natural
–1–
with Interior Locking
Packaging
Unit
Bold Part Numbers are Preferred Types
2057
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Housings
AMP Standard Timer Housings
9 Position Rast 5 Variations
Keying Version
Colour
Part
Numbers
RAST 5 Version
–9–
–8–
–7–
with Exterior Locking
—
2-928247-9
600
d
–6–
– 5 –b
–4–
–3–
d
Blue
–2–
09-D
–1–
with Interior Locking
Packaging
Unit
AMP Standard Timer Housings
9 Position Special Variations
Colour
Part
Numbers
Version
–6–
–7–
–8–
–9–
–6–
–7–
–8–
– 9 –b
–6–
–7–
–8–
–9–
–6–
–7–
–9–
–5–
–5–
–5–
–4–
—
with Exterior Locking
—
1.000
—
1.000
928247-9
500
3-928247-9
600
–8–
a
c
–2–
c
d
a
c
–5–
–4–
–3–
–2–
–4–
–3–
–2–
–1–
Brown
—
–4–
–2–
– 1 –b
Yellow
928151-9
–3–
– 1 –b
Natural
927740-9
– 3 –b
Natural
–1–
with Interior Locking
Packaging
Unit
Bold Part Numbers are Preferred Types
2058
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Housings
AMP Standard Timer Housings
10 Position Special Variations
Keying Version
Colour
Part
Numbers
RAST 5 Version
–6–
–7–
–8–
–9–
–6–
–7–
–8–
–9–
– 10 –
–5–
–5–
—
1-928247-0
1.400
—
2-928247-0
500
2
d
–4–
–4–
–3–
–2–
–2–
– 10 –
c
d
–3–
a
c
– 1 –b
Grey
with Exterior Locking
Rast 5
Brown
–1–
with Interior Locking
Packaging
Unit
AMP Standard Timer Housings
11 Position Rast 5 Variations
Keying Version
Colour
Part
Numbers
RAST 5 Version
– 11 – b
– 10 –
–9–
Packaging
Unit
with Exterior Locking
1-928247-1
—
1.000
Yellow
d
–8–
–7–
–6–
–5–
–4–
–3–
c
Black
–2–
11-B
– 1 –b
with Interior Locking
AMP Standard Timer Housings
11 Position Special Variations
Colour
Part
Numbers
Version
–3–
–4–
–5–
–6–
–7–
–8–
–9–
– 10 –
–3–
–4–
–5–
–6–
–7–
–8–
–9–
– 10 –
– 11 – b
–2–
–2–
1-927740-1
—
800
– 11 – b
– 1 –b
Blue
with Exterior Locking
—
2-928247-1
1.000
c
d
Natural
– 1 –b
with Interior Locking
Packaging
Unit
AMP Standard Timer Housings
12 Position Special Variations
Colour
Part
Numbers
Version
– 12 –
– 11 –
– 10 –
–9–
– 8 –b
–7–
–6–
–5–
–4–
–3–
–2–
Natural
–1–
with Interior Locking
Packaging
Unit
with Exterior Locking
1-927740-2
—
700
Bold Part Numbers are Preferred Types
2059
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Standard Timer Connector and Contacts
Technical Data
Derating Curve
I/A
20
Material:
Brass, Tin Plated
18
5
16
Mating Part:
6.3 Tab
6
Standard Power Timer
Current Rating
14
Wire:
FLK 0.5/0.75 and 1.5mm2
Current Carrying Capacity to 6A:
1 = Wire 0.50mm2, 11pos. housing
2 = Wire 0.75mm2, 11pos. housing
3 = Wire 0.50mm2, 2pos. housing
4 = Wire 0.75mm2, 2pos. housing
12
10
8
1 2 34
6
Standard Timer
4
Current Carrying Capacity to 16A:
5 = Wire 1.50mm2, 11pos. housing
6 = Wire 1.50mm2, 2pos. housing
2
0
20
40
60
80
100
120
t/ºC
Ambient Temperature
Standard Timer Contacts
with One Locking Lance
Wire Size Range
(mm2)
Insulation
Diameter Range
(mm)
Material
Finish
Part Number
Packaging Unit
0.5–1.0
1.4–2.3
CuZn/Brass
Tin Plated
928820-1
3.000
1.0–2.5
3.0–4.3
CuZn/Brass
Tin Plated
926973-1
2.500
Wire Size Range
(mm2)
Insulation
Diameter Range
(mm)
Material
Finish
Part Number
Packaging Unit
0.5–1.0
1.4–2.3
CuZn/Brass
Tin Plated
964201-1
3.000
1.0–2.5
3.0–4.3
CuZn/Brass
Tin Plated
964202-1
2.000
Wire Size Range
(mm2)
Insulation
Diameter Range
(mm)
Material
Finish
Part Number
Packaging Unit
1.0–2.5
2.2–3.0
CuFe/Copper Iron
Tin Plated
964203-1
2.300
1.0–2.5
2.2–3.0
CuFe/Copper Iron
Silver Plated
964203-5
2.300
1.5–3.0
max. 2 x 3.0
CuFe/Copper Iron
Tin Plated
964204-1
2.000
1.5–3.0
max. 2 x 3.0
CuFe/Copper Iron
Silver Plated
964204-5
2.000
Standard Timer Contacts
with Two Locking Lances
Standard Power Timer
Bold Part Numbers are Preferred Types
2060
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Engineering Notes
2
Rast 5
2061
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
AMP Standard Timer
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Engineering Notes
2062
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Specifications subject to
change.
www.tycoelectronics.com
工商网监
湘ICP备2023018690号
