6-1609967-4

KEM-BS SERIES THREE PHASE HIGH PERFORMANCE EMI FILTER BOOKSHELF TYPE SINGLE STAGE DELTA CONFIGURATION INTRODUCTION Bookshelf design for motor drive applications requiring minimum space and convenient installation with high performance at significant interference levels APPLICATION • Industrial Automation • HVAC • CNC Machines STANDARD NEW-DIN RAIL FEATURES • • • • 3 Phase filters for Drives/Invertors Bookshelf Design Chassis Mounting High Performance APPROVALS AND COMPLIANCE • UL Recognised • CSA Certified Specifications Electrical Characteristics Maximum Continuous Operating Voltage Current Ratings Operating Frequency 440/520VAC 7A to 150A @40°C, Din Mount 7A to 100A @40°C 50/60Hz Line to Ground 2632VDC for 1 Minute High Potential Test Voltage -440VAC Line to Line 1892VDC for 1 Minute Line to Ground 2856VDC for 1 Minute High Potential Test Voltage -520VAC Line to Line 2236VDC for 1 Minute Overload Capability 135% of Rated current for 15 minutes KEM-BS Series Three Phase High Performance EMI Filter Functional Characteristics Operating Temperature Range -25°C to +85°C Climatic Category 25/85/21 Termination (Depends on Current Rating) Shock Proof Flammability Corresponding to UL 94 V-0 Reference Standards Design Corresponding to UL 60939-3 and CSA 22.2 No.8-13 Selection Table – Standard Version TE Ordering Number Catalog Number Rated Current @40°C Rated Voltage @40°C Leakage Current (mA) Weight (Kgs) Termination 2-1609967-7 7KEMS10ABSD 7A 440 VAC 5 0.7 4 3-1609967-0 16KEMS10ABSD 16A 440 VAC 5 0.8 4 3-1609967-1 30KEMS10ABSD 30A 440 VAC 5 0.8 4 3-1609967-2 42KEMS10ABSD 42A 440 VAC 10 1.2 10 3-1609967-3 55KEMS10ABSD 55A 440 VAC 10 2 10 3-1609967-4 75KEMS10ABSD 75A 440 VAC 10 2 16 3-1609967-5 100KEMS10ABSD 100A 440 VAC 10 3 25 3-1609967-6 120KEMS10ABSD 120A 440 VAC 10 4 50 3-1609967-7 150KEMS10ABSD 150A 440 VAC 10 4 50 5-1609967-7 7KEMS10BBSD 7A 520 VAC 5 0.7 4 6-1609967-0 16KEMS10BBSD 16A 520 VAC 5 0.8 4 6-1609967-1 30KEMS10BBSD 30A 520 VAC 5 0.8 4 6-1609967-2 42KEMS10BBSD 42A 520 VAC 10 1.2 10 6-1609967-3 55KEMS10BBSD 55A 520 VAC 10 2 10 6-1609967-4 75KEMS10BBSD 75A 520 VAC 10 2 16 6-1609967-5 100KEMS10BBSD 100A 520 VAC 10 3 25 6-1609967-6 120KEMS10BBSD 120A 520 VAC 10 4 50 6-1609967-7 150KEMS10BBSD 150A 520 VAC 10 4 50 INDUSTRIAL / KEM-BS SERIES 2 KEM-BS Series Three Phase High Performance EMI Filter Selection Table – Din Rail Mount NEW VERTICAL MOUNT HORIZONTAL MOUNT Note: Din Rail not supplied Catalog Number Din Type Rated Current @40°C Rated Voltage @40°C Leakage Current (mA) Weight (Kgs) Termination 8-1609967-1 7KEMS10ABSDDM DUAL 7A 440 VAC 5 0.8 4 8-1609967-2 16KEMS10ABSDDM DUAL 16A 440 VAC 5 0.9 4 8-1609967-3 30KEMS10ABSDHM HORIZONTAL 30A 440 VAC 5 0.9 4 8-1609967-4 42KEMS10ABSDHM HORIZONTAL 42A 440 VAC 10 1.3 10 8-1609967-5 55KEMS10ABSDHM HORIZONTAL 55A 440 VAC 10 2.1 10 8-1609967-6 30KEMS10ABSDVM VERTICAL 30A 440 VAC 5 1 4 8-1609967-7 42KEMS10ABSDVM VERTICAL 42A 440 VAC 10 1.4 10 8-1609967-8 55KEMS10ABSDVM VERTICAL 55A 440 VAC 10 2.2 10 8-1609967-9 75KEMS10ABSDDM DUAL 75A 440 VAC 10 2.2 16 9-1609967-0 100KEMS10ABSDDM DUAL 100A 440 VAC 10 3.2 25 7-1609968-2 7KEMS10BBSDDM DUAL 7A 520 VAC 5 0.8 4 7-1609968-3 16KEMS10BBSDDM DUAL 16A 520 VAC 5 0.9 4 7-1609968-4 30KEMS10BBSDHM HORIZONTAL 30A 520 VAC 5 0.9 4 7-1609968-5 42KEMS10BBSDHM HORIZONTAL 42A 520 VAC 10 1.3 10 7-1609968-6 55KEMS10BBSDHM HORIZONTAL 55A 520 VAC 10 2.1 10 7-1609968-7 30KEMS10BBSDVM VERTICAL 30A 520 VAC 5 1 4 7-1609968-8 42KEMS10BBSDVM VERTICAL 42A 520 VAC 10 1.4 10 7-1609968-9 55KEMS10BBSDVM VERTICAL 55A 520 VAC 10 2.2 10 8-1609968-0 75KEMS10BBSDHM DUAL 75A 520 VAC 10 2.2 16 8-1609968-1 100KEMS10BBSDHM DUAL 100A 520 VAC 10 3.2 25 TE Part Number INDUSTRIAL / KEM-BS SERIES 3 KEM-BS Series Three Phase High Performance EMI Filter Connectors Cross Section 4 10 16 25 50 Wire Section (mm2) 4mm2 10 mm² 16 mm² 25 mm² 50 mm² Wire Section (AWG) 12AWG 8 AWG 6 AWG 4 AWG 1/0 AWG max 10mm max 13.5 mm max 17 mm max 17 mm max 20 mm 0.5 Nm/ 4.5 in.lbs 1.2 Nm/ 10.8 in.lbs 2-2.2 Nm/ 1819.8 in.lbs 2 Nm/ 18 in.lbs 6 Nm/ 54 in.lbs Wire Stripping Max Recommended Torque Insertion Loss (Typical) – Measured in Closed 50Ω System Common Mode 50Ω/50Ω Current Rating Frequency in MHz 0.01 0.05 0.15 0.5 1 3 5 10 30 7A 54 56 48 71 82 70 65 40 16 16A 42 34 46 80 73 48 40 29 13 30A 40 26 47 70 73 51 44 34 13 42A 20 13 46 78 69 50 42 32 12 55A 24 28 32 73 66 56 48 36 19 75A 23 32 36 71 67 60 54 30 17 100A 21 32 36 69 58 56 50 30 17 120A 19 28 33 70 60 56 49 26 18 150A 20 20 31 65 40 28 24 19 11 Differential Mode 50Ω/50Ω Current Rating Frequency in MHz 0.01 0.05 0.15 0.5 1 3 5 10 30 7A 30 32 40 69 54 50 48 34 25 16A 28 30 42 79 81 58 43 8 22 30A 28 21 37 76 82 67 49 20 28 42A 18 21 35 83 74 64 45 13 27 55A 22 30 34 69 70 58 40 49 22 75A 38 40 45 86 81 68 50 49 35 100A 36 40 47 80 75 62 54 50 35 120A 32 35 45 78 72 60 54 47 31 150A 31 30 34 48 39 28 23 17 15 INDUSTRIAL / KEM-BS SERIES 4 KEM-BS Series Three Phase High Performance EMI Filter Common Mode Insertion Loss (Typical in dB – Refer to table above) 7A 16A 30A 42A 55A 75A INDUSTRIAL / KEM-BS SERIES 5 KEM-BS Series Three Phase High Performance EMI Filter Common Mode Insertion Loss (Typical in dB – Refer to table above) 100A 120A 150A INDUSTRIAL / KEM-BS SERIES 6 KEM-BS Series Three Phase High Performance EMI Filter Case Dimensions – Standard Version 7A Shock Proof Type 16A Shock Proof Type 30A Shock Proof Type 42A Shock Proof Type 55A Shock Proof Type 75A Shock Proof Type INDUSTRIAL / KEM-BS SERIES 7 KEM-BS Series Three Phase High Performance EMI Filter Case Dimensions – Standard Version 100A Shock Proof Type INDUSTRIAL / KEM-BS SERIES 120A to 150A Shock Proof Types 8 KEM-BS Series Three Phase High Performance EMI Filter Case Dimensions – Din Rail Mount 7A Shock Proof Type – Dual Mount Note: Din Rail not supplied 16A Shock Proof Type – Dual Mount Note: Din Rail not supplied INDUSTRIAL / KEM-BS SERIES 9 KEM-BS Series Three Phase High Performance EMI Filter Case Dimensions – Din Rail Mount 30A Shock Proof Type – Horizontal Mount Note: Din Rail not supplied 30A Shock Proof Type – Vertical Mount Note: Din Rail not supplied INDUSTRIAL / KEM-BS SERIES 10 KEM-BS Series Three Phase High Performance EMI Filter Case Dimensions – Din Rail Mount 42A Shock Proof Type – Horizontal Mount Note: Din Rail not supplied 42A Shock Proof Type – Vertical Mount Note: Din Rail not supplied INDUSTRIAL / KEM-BS SERIES 11 KEM-BS Series Three Phase High Performance EMI Filter Case Dimensions – Din Rail Mount 55A Shock Proof Type – Horizontal Mount Note: Din Rail not supplied 55A Shock Proof Type – Vertical Mount Note: Din Rail not supplied INDUSTRIAL / KEM-BS SERIES 12 KEM-BS Series Three Phase High Performance EMI Filter Case Dimensions – Din Rail Mount 75A Shock Proof Type – Dual Mount Note: Din Rail not supplied 100A Shock Proof Type – Dual Mount Note: Din Rail not supplied All dimensions in mm; Tolerances according: ISO2768-m INDUSTRIAL / KEM-BS SERIES 13 HOW TO ORDER Part Number 30 - KEM - S - 10 - A - BS - D - HM Current Rating 30 Current Rating Series Type KEM Series Type Filter Stage DM Dual Mount HM Horizontal Mount VM Vertical Mount D Star W WYE S Single FP Fully Potted D Dual BS Book Shelf Termination Voltage 1 Quick Connect A 440VAC 6 Nut & Bolt B 520VAC 10 Shock Proof te.com ©2022 TE Connectivity. All Rights Reserved. TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 12/22   ED INDUSTRIAL / KEM-BS SERIES