608036-1.

1590 Kauffman Road Landisville, PA 17538-1499 Phone: 717-898-4302 Rev. A 29Oct2007 CHARACTERISTICS OF SILICONE FUSION TAPE The following values are typical performance data and are not intended to be used as design data. PROPERTY TEST METHOD PERFORMANCE Operating Temperature Range: Continuous -60oC to 200oC Intermittent -65oC to 260oC Specific Gravity ASTM D792 Hardness, Durometer, Shore A ASTM D2148 Room-cured - 24 Hours 1.2 50 o 70 o 75 Cured at 300 F - 24 Hours Cured at 480 F - 24 Hours Tensile Strength, psi, minimum ASTM D119 700 Elongation, %, minimum ASTM D119 300 Tear Strength, ppi, minimum Bond Strength, pounds, minimum ASTM D624, Die B MIL CID-A-A-59163 2 (1” width) Adhesion, inches unwind, maximum ASTM D2148 3 Cold Brittle Point, oC, maximum ASTM D746 -65 Water Absorption, % max., by weight MIL CID-A-A-59163 Dielectric Strength, volts/mil, minimum MIL CID-A-A-59163 3 Thickness 0.020 Inch 400 Thickness 0.030 Inch 400 Thickness 0.040 Inch 300 Thickness 0.050 Inch 275 Thickness 0.060 Inch 250 Thickness 0.080 Inch 200 Dielectric Constant, 1 KHz ASTM D150 2.95 Dissipation Factor, 1 KHz ASTM D150