6200050004

CUSTOMER DRAWING Product Name D-104-00 L max 29.75 (1.170) Product Dimensions øA øB min min 10.80 11.65 (0.425) (0.460) øD max 11.43 (0.450) Cable Dimensions øE J±0.5 min (J±0.02) 5.70 8 (0.225) (0.315) M±0.5 (M±0.02) 9 (0.355) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. 3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: natural. APPLICATION 1. This part is designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting the dimensional criteria listed, having tin or silver plated copper shields. 2. Install using Tyco Electronics approved convection or infrared tools in accordance with Tyco Electronics assembly procedure RCPS-100-70. 3. Assemblies will meet requirements of Tyco Electronics specification RT-1404 and National Aerospace Standard NAS-1747. 4. Temperature range: -55°C to +150°C. For best results, prepare the cable as shown: Tyco Electronics 300 Constitution Dr Menlo Park, CA 94025, U.S.A. Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A DRAWN BY: P.TALLY ANGLES: N/A ROUGHNESS IN MICRON CAGE CODE: 06090 Raychem Devices Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. REPLACES: ECO NUMBER: D981826 TITLE: SOLDERSLEEVE SHIELD TERMINATOR DOCUMENT NO.: D-104-00 REV: DATE: A SCALE: 07-019646 If this document is printed it becomes uncontrolled. Check for the latest revision © 2007 Tyco Electronics Corporation. All rights reserved 22-Aug-07 SIZE: NTS A SHEET: 1 of 1