620040N001

SPECIFICATION CONTROL DRAWING Product Revision Product Name D-108-06 F D-108-07 E D-108-08 E L max 127 (5.0) 127 (5.0) 131 (5.150) Product Dimensions E øA min min 73 8.9 (2.875) (0.350) 74 10.2 (2.915) (0.400) 74 12.7 (2.915) (0.500) Cable Dimensions øD øD min max 4.5 7.5 (0.175) (0.295) 5 8.8 (0.200) (0.345) 7 11.3 (0.275) (0.445) øB min 7.5 (0.295) 8.8 (0.345) 11.3 (0.445) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn96 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 3. MELTABLE INSERT: Meltable thermoplastic. Color: clear. APPLICATION 1. These parts are designed to attach an overshield to butt spliced shielded cables. 2. Temperature range: -55°C to +150°C. Cable dimensions: see table. * A trademark of Raychem Corporation. Raychem THERMOFIT DEVICES TITLE: Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A DRAWN BY: DATE: PROD. REV. M. FORONDA 06/29/98 SEE TABLE SOLDERSLEEVE* DEVICE DOCUMENT NO: D-108-06/-08 DCR NUMBER: REPLACES: D980906 DOC ISSUE: 1 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None D10807 SIZE: A SHEET: 1 of 1