62308-2

AMPLIVAR SPLICES PERMITTING BUSSING OF MULTIPLE SPLICES Now Support Almost Infinite Splicing Compression Crimp Connection Technology TE Connectivity (TE) now offers expanded applicability for three of its 9-serrration, pigtail type AMPLIVAR splices. New versions of AMPLIVAR product terminator (APT) machines support the bussing or ganging of multiple splices in almost infinite splicing combinations. Part numbers 62304-2, 62306-2 and 62308-2 can each support three magnet wires in a single crimp. By controlling the APT machine's cutoff shear, the splices can be bussed to support the splicing together of many more wires. This is accomplished by serializing the connections in connected gangs. Open barrel, tinplated brass AMPLIVAR splices require no prestripping of copper or aluminum magnet wires. The splices have machined, sharp edged serrations within the crimp barrels. These serrations pierce the insulating layer of the magnet wire in a manner that provides a large contact area. KEY FEATURES ELECTRICAL • Proven, existing AMPLIVAR splices can be used in a multiple bussed configuration for nearly infinite splicing • Voltage rating: Per terminated winding • Current rating: Per connected wire size • Machined serrations in splice crimp barrel pierce insulating film on magnet wires and create quality electical connections that are mechanically strong • No pretripping or soldering of magnet wire is required • Bussed terminations can be created using new APT-5 machine or using existing APT-5 machine with retrofit kit MECHANICAL • Serrations: 9 • Configuration: Pigtail • Temperature range: -65°C to +150°C Wire range: see table on next page • Accommodates both copper and aluminum magnet wire • • APT-5 machines can be set for multiple crimp parameters in sequence MATERIAL • Compression crimp eliminates cold solder joints, weld burns and potential damage from thermal processes • Tin plated brass SPECIFICATIONS & STANDARDS APPLICATIONS FOR BUSSED SPLICES • Product specification: 108-32030 • Inverter compressors • Application specification: 114-2003 • Multispeed motors APPLIANCES /// AMPLIVAR SPLICES FOR NEARLY INFINITE SPLICING AMPLIVAR SPLICES PERMITTING BUSSING OF MULTIPLE SPLICES Compression Crimp Connection Technolgy PART NUMBER DETAIL TABLE Multiple Wire Range Single Splice Stock Crimp AMPLIVAR Bussed Splice Wire Range Solid Dia. Configuration Thickness Width Splice Configuration AWG in Wire Range in in Part [mm2] Wire Range [mm] CMA [mm] [mm] Number CMA Infinite Splicing APT-5A Terminator Infinite Splicing APT-5E Terminator Infinite Splicing Retrofit Kit for Existing APT5 62304-2 22-15.5 .028-.055 [0.38-1.54] [0.70-1.40] 600-3000 600-3000 .020 [0.51] .110 [2.79] 1-2326135-0 1-2326145-0 1-2326143-0 62306-2 18.5-13.5 .039-.071 [0.80-2.54] [1.00-1.80] 1500-4100 1500-5000 .020 [0.51] .110 [2.79] 1-2326135-2 1-2326145-2 1-2326143-2 62308-2 15.5-12 .055-.083 [1.54-3.46] [1.40-2.10] 3000-5000 3000-7000 .020 [0.51] .140 [3.56] 1-2326135-5 1-2326145-5 1-2326143-5 Note that the CMA capacity for a given part number may vary depending upon whether that part is used as a single splice or in a multiple bussed (infinite) splice configuration. AMPLIVAR PRODUCT TERMINATOR (APT) DETAILS For more information about the above-listed APT machines, visit www.te.com/InfiniteSplice. TE TECHNICAL SUPPORT CENTER USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 te.com te.com AMPLIVAR, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2018 TE Connectivity Ltd. family of companies All Rights Reserved. 1-1773960-7 8/18   Original APPLIANCES /// AMPLIVAR SPLICES FOR NEARLY INFINITE SPLICING