625307N002

SPECIFICATION CONTROL DRAWING MATERIALS 1. INSULATION SLEEVE: Heat shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. 3. MELTABLE RINGS: Immersion resistant thermoplastic. APPLICATION 1. This part is designed to provide immersion resistant terminations of tin or silver plated wires having insulations rated for at least 135°C to the terminals of a Multiplex Transformer. Wire accommodation: Single Wire: Insulation O.D.: 1.14 (0.045) max. Wire Gauge: 24 or 26 AWG Two Wires: Insulation O.D.: 1.02 (0.040) max. Wire Gauge: 26, 28 or 30 AWG Connector Terminal: Contact: Diameter: 0.64 (0.025) Height: 3.81±0.25 (0.150±0.010) above Boss Boss: Barb Diameter: 1.83 (0.072) max. Height: 3.81±0.25 (0.150±0.010) Material: PVF2 or equivalent 2. Sleeve will recover to 0.76 (0.030) max. I.D. 307 Constitution Drive Menlo Park, CA 94025, USA Wire and Harnessing Products (Immersion Resistant) SOLDER SLEEVE WIRE TERMINATOR, MULTIPLEX TRANSFORMER TERMINAL TITLE : UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Tyco Electronics reserves the right to amend ANGLES: N/A TOLERANCES: this drawing at any time. Users should 0.00 N/A evaluate the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A DOCUMENT NO.: D-141-0108 DCR NUMBER: REPLACES: D010070 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA 04-Apr.-01 B 1 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None N/A SIZE: A SHEET: 1 of 1