Soft Shell
Pin and Socket Connectors
AMP
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board)
Product Facts
■
Power circuit connector with
5.0 mm contact centerline
■
Wire-to-board connectors
consisting of plug housings
for wires and PCB header
assemblies
■
With a clear clicking sound,
contact insertions can be
made easier. The double
lock plate provides for
complete loading of contacts
■
Locking levers are
surrounded by walls, which
protect levers and prevent
tangling with wires
■
Connector is designed to
release bubbles created
by the process of potting
(PC board coating)
■
Housing lances also help
prevent tangling of wired
contacts
■
Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
5.0 mm Power Key
Connectors are for power
circuits of home appliances,
especially targeting gas
appliances. The connector
features four kinds of keying
per housing.
R
■
Certified by Canadian
Standards Association,
File No. LR7189
R
Only color-coding of housings limited the efficiency
of blind mating where you
could not see connectors.
However, the new keying
mechanism not only
improves assembly
efficiency but also helps
prevent mismating.
Part numbers involved
can be reduced so that
purchasing and stock
level control can be
made simpler.
Performance Characteristics
Technical Documents
Voltage Rating—300 VAC1
Current Rating—10A max.2
Operating Temperature—
-30°C ~ +105˚C
Applicable Wire—24-16 AWG
Applicable PC Board Thickness—
1.6 mm
Product Specification
108-5699
Application Specification
114-5292
5.0 mm Power Key Connectors
.197 [5.00] Centerline
Compact design with
19.4 mm mated height
Standard Density
■
1 Excludes header tyne round
space. Usable for 150 VAC
applications when the round
dimensions are 3 mm or less.
2 Specified values vary according to
the number of contacts and the
wire used. The 10 A maximum
value applies to 16 AWG wire
used with 2 contacts.
135
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) (Continued)
Quick Reference Chart for Mating Part Numbers
Type of Keying/Color
Part Number
Type A/Natural
Type B/Red
Type C/Blue
Type D/Yellow
Type A/Natural
Type B/Red
Type C/Blue
Type D/Yellow
Type A/Natural
Type B/Red
Type C/Blue
Type D/Yellow
Type A/Natural
Type B/Red
Type C/Blue
Type D/Yellow
1376388-1
1-1376388-2
2-1376388-3
3-1376388-4
1376389-1
1-1376389-2
2-1376389-3
3-1376389-4
1376390-1
1-1376390-2
2-1376390-3
3-1376390-4
1376391-1
1-1376391-2
2-1376391-3
3-1376391-4
Applicable
Double Lock Plate
Part Number
1376394-1
1376394-1
1376294-1
1376394-1
1376395-1
1376395-1
1376395-1
1376395-1
1376396-1
1376396-1
1376396-1
1376396-1
1376397-1
1376397-1
1376397-1
1376397-1
Type A/Natural
Type B/Red
Type C/Blue
Type D/Yellow
Type A/Natural
Type B/Red
Type C/Blue
Type D/Yellow
1376392-1
1-1376392-2
2-1376392-3
3-1376392-4
1376393-1
1-1376393-2
2-1376393-3
3-1376393-4
1376394-1
1376394-1
1376394-1
1376394-1
1376395-1
1376395-1
1376395-1
1376395-1
Plug Housing
No. of Pos.
2
3
4
6
Mating Header Assy.
Part Number
1376382-1
1-1376382-2
2-1376382-3
3-1376382-4
1376383-1 1376421-1
1-1376383-2 1-1376421-2
2-1376383-3 2-1376421-3
3-1376383-4 3-1376421-4
1376384-1
1-1376384-2
2-1376384-3
3-1376384-4
1376385-1
1-1376385-2
2-1376385-3
3-1376385-4
1376386-1
1-1376386-2
2-1376386-3
3-1376386-4
1376387-1
1-1376387-2
2-1376387-3
3-1376387-4
Standard Density
2 Row
4
6
*Included in Header Assy. line are Tube Stick version. Refer to the appropriate description in the catalog.
5.0 mm Power Key Connectors
.197 [5.00] Centerline
Note: All part numbers are RoHS Compliant.
Note: Dimensions shown are metric.
136
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) (Continued)
Receptacle Contacts
Material and Finish
Pre-tinned Copper Alloy
Section X-X
Wire Ins. Dia.
Receptacle Contact
Part No.
Applicator
Part No.
1.89~2.7
2.0~3.1
1376348-1 (Strip Form)
1376347-1 (Strip Form)
*
*
Standard Density
Wire Range
AWG
mm2
24~20
0.22~0.53
20~16
0.5~1.25
* Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Number.
Note: Dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
5.0 mm Power Key Connectors
.197 [5.00] Centerline
Double Lock Plates
Material and Finish
UL94V-0, 6/6 Nylon, glass filled, Black
No. of Pos.
2
3
4
6
Dimensions (Double Lock Plate)
A
13.5
18.5
23.5
33.5
B
5
10
15
25
Double Lock Plate
Part No.
Applicable
Plug Part No.
1376394-1
1376395-1
1376396-1
1376397-1
첸-1376388-첸 첸-1376392-첸
첸-1376389-첸 첸-1376393-첸
첸-1376390-첸
첸-1376391-첸
* Contact the Tooling Assistance Center (TAC) for Applicator Part Number.
Note: Dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
137
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) (Continued)
Plug Housings
(For Receptacle Contacts)
Material and Finish
Housing—6/6 Nylon, glass filled
Related Product Data
Receptacle Contacts—page 137
Double Lock Plates—page 137
Mating Headers—page 140
Standard Density
Section X-X
5.0 mm Power Key Connectors
.197 [5.00] Centerline
Type of Keying/Color
No. of
Pos.
2
Plug Housing Part No.
Type of Keying/Color
Dimensions
A
B
15
—
Type A
Natural
1376388-1
Type B
Red
1-1376388-2
Type C
Blue
2-1376388-3
Type D
Yellow
3-1376388-4
Applicable
Double
Lock Plate
Part Number
1376394-1
3
20
10
1376389-1
1-1376389-2
2-1376389-3
3-1376389-4
1376395-1
4
6
25
35
15
25
1376390-1
1376391-1
1-1376390-2
1-1376391-2
2-1376390-3
2-1376391-3
3-1376390-4
3-1376391-4
1376396-1
1376397-1
Mating
Header Assy.
Part Number
첸-1376382-첸
첸-1376383-첸
첸-1376421-첸
첸-1376384-첸
첸-1376385-첸
Note: Dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
138
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) (Continued)
Plug Housing (2 Rows)
(For Receptacle Contacts)
Material and Finish
Housing—6/6 Nylon, glass filled
Related Product Data
Receptacle Contacts—page 137
Double Lock Plates—page 137
Mating Headers—page 141
Section X-X
Standard Density
Type of Keying/Color
5.0 mm Power Key Connectors
.197 [5.00] Centerline
No. of
Pos.
4
6
Plug Housing Part No.
Type of Keying/Color
Dimensions
A
B
15
20
—
10
Type A
Type B
Natural
Red
1376392-1 1-1376392-2
1376393-1 1-1376393-2
Type C
Blue
2-1376392-3
2-1376393-3
Type D
Yellow
3-1376392-4
3-1376393-4
Applicable
Double
Lock Plate
Part Number
Mating
Header Assy.
Part Number
1376394-1
1376395-1
씲-1376386-씲
씲-1376387-씲
Note: Dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
139
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) (Continued)
Vertical Header Assembly
Material and Finish
Housing—6/6 Nylon, glass filled
Tab Contacts -Copper Alloy, Tin plated
Related Product Data
Mating Plug Housings—page 138
Standard Density
Section X-X
5.0 mm Power Key Connectors
.197 [5.00] Centerline
Type of Keying/Color
PC Board Layout
No. of
Pos.
Dimensions
A
B
2
11.6
—
3
16.6
10
4
21.6
15
6
31.6
25
2*
16.6
10
Loose Piece
Tube
(Qty.)
L.P
Tube
L.P
Tube
L.P
Tube
L.P
Tube
L.P
Tube
Type A
Natural
1376382-1
1376437-1 (40)
1376383-1
1376439-1 (25)
1376384-1
1376440-1 (20)
1376385-1
1376441-1 (15)
1376421-1
1376444-1 (25)
Vertical Header Assy. Part No.
Type of Keying/Color
Type B
Type C
Red
Blue
1-1376382-2
2-1376382-3
1-1376437-2 (40)
2-1376437-3 (40)
1-1376383-2
2-1376383-3
1-1376439-2 (25)
2-1376439-3 (25)
1-1376384-2
2-1376384-3
1-1376440-2 (20)
2-1376440-3 (20)
1-1376385-2
2-1376385-3
1-1376441-2 (15)
2-1376441-3 (15)
1-1376421-2
2-1376421-3
1-1376444-2 (25)
2-1376444-3 (25)
Type D
Yellow
3-1376382-4
3-1376437-4 (40)
3-1376383-4
3-1376439-4 (25)
3-1376384-4
3-1376440-4 (20)
3-1376385-4
3-1376441-4 (15)
3-1376421-4
3-1376444-4 (25)
Mating
Plug Housing
Part Number
씲-1376388-씲
씲-1376389-씲
씲-1376390-씲
씲-1376391-씲
씲-1376389-씲
*10 mm centerline
Note: Dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
140
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) (Continued)
Vertical Header Assembly
(2 Rows)
Material and Finish
Housing—6/6 Nylon, glass filled
Tab Contacts—Copper Alloy, Tin
plated
Related Product Data
Mating Plug Housings—page 139
Section X-X
Standard Density
Type of Keying/Color
5.0 mm Power Key Connectors
.197 [5.00] Centerline
PC Board Layout
No. of
Pos.
Dimensions
A
B
4
11.6
—
6
16.6
10
Loose Piece
Tube
(Qty.)
L.P
Tube
L.P
Tube
Type A
Natural
1376386-1
1376442-1 (40)
1376387-1
1376443-1 (25)
Vertical Header Assy. Part No.
Type of Keying/Color
Type B
Type C
Red
Blue
1-1376386-2
2-1376386-3
1-1376442-2 (40)
2-1376442-3 (40)
1-1376387-2
2-1376387-3
1-1376443-2 (25)
2-1376443-3 (25)
Type D
Yellow
3-1376386-4
3-1376442-4 (40)
3-1376387-4
3-1376443-4 (25)
Mating
Plug Housing
Part Number
씲-1376392-씲
씲-1376393-씲
Note: Dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
141
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
142
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.093 [2.36] Commercial Pin and Socket Connectors
Product Facts
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
R
■
R
Technical Documents
The .093 Commercial Pin and Socket
Connectors performance characteristics
found on pages 143-144 are based on
free-hanging and panel mount connectors, loaded with contacts crimped on
stranded wire.
Application Specification
114-49000 .093 Commercial Pin and
Socket Connectors
Product Specification
108-1038 .093 Commercial Pin and
Socket Connectors
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline
■
Performance Characteristics
Standard Density
■
Polarized
Cavity identification
Low contact-mating force
Dual locking lances
Detent and positive locking
Contacts available in brass
and phosphor bronze with
tin and gold plating
Panel mounting and freehanging styles
“F” crimp contacts
Applicator and hand tool
available
Economical commercialgrade connectors
Compatible with high-speed
application machinery and
competitive soft shells
Wire range 24 to 14 AWG
[0.2 to 2 mm2]
Accepts wires with
insulation diameters as
large as .180 [4.57]
Housings available in 1 to
15 positions
.093 plug and receptacle
housings accept pin or
socket contacts. The
preferred convention is to
use socket contacts with
receptacle housings
Not for interrupting current
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Certified by Canadian
Standards Association,
File No. LR 7189
Thermal Shock— -55°C to +105°C
Temperature-Humidity Cycling—
+25°C to +65°C at 90–95% RH
Corrosion—48 hr. at 5% salt
concentration
Vibration—10-55-10 cycles per
minute at .06 [1.52] total excursion
Physical Shock—18 shocks,
50 Gs sawtooth in 11 milliseconds
Durability—50 mating cycles
Dielectric Withstanding Voltage—
1.0 kVAC
Insulation Resistance—
1000 megohms min. initial
Voltage Rating—250 V AC or DC
Connector Mating—
2.5 lb. [11.1 N] max. per contact
Connector Unmating—
1.5 lb. [6.7 N] min. per contact
Contact Retention—
10 lb. [44.5 N] min.
143
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.093 [2.36] Commercial Pin and Socket Connectors (Continued)
Performance
Characteristics (continued)
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
Maximum Current—Maximum current rating of .093 Commercial Pin and
Socket Connectors is limited by the
maximum operating temperature of the
housings which is 105°C including the
temperature rise of the contacts which
is a maximum of 30°C. There are
several variables which have a direct
effect on this maximum current-carrying
capability for a given connector and
must be considered for each application.
These variables are:
Wire Size—Larger diameter wire will
carry more current since it has less
internal resistance to current flow and
thus generates less heat. Longer wire
lengths also enhance current-carrying
capabilities since the wire conducts
heat away from the connector.
Wire-to-Wire
.093 Commercial Pin and Socket Connectors — Calculated Current Table
Number of
Circuits
2
3
4 In-Line
4 Matrix
5
6
9
12
15
Wire AWG
14
13.00
13.00
11.00
11.00
10.00
10.00
9.00
8.00
7.00
16
12.00
11.00
10.00
10.00
9.00
9.00
7.00
7.00
6.00
18
11.00
10.00
9.00
9.00
8.00
8.00
6.00
6.00
5.00
20
8.00
8.00
7.00
7.00
6.00
6.00
5.00
4.00
4.00
22
6.00
6.00
5.00
5.00
5.00
4.00
4.00
3.00
3.00
24
6.00
5.00
4.00
4.00
4.00
4.00
3.00
3.00
3.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection
of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully
loaded housings being 100% energized. Note: All combinations were not tested and this chart contains interpolated
and extrapolated values.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Standard Density
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Related Product Data
Product Specification — 108-1038
Minimum Wire Lengths for T-Rise vs. Current Testing
AWG
30
28
26
24
20
Min. Length (in.)
2.6
3.2
4.1
5.1
7.8
AWG
18
16
14
12
10
Min. Length (in.)
9.4
11.3
13.7
16.4
19.3
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline
Note: If wire lengths used are less than those listed above, the currentcarrying ability of the system will be reduced due to less heat being
conducted away from the connector. The customer should fully test
all applications.
Termination Resistance/Contact Crimp Tensile Force
Wire Size
AWG
mm2
24
22
20
18
16
14
0.2
0.3–0.4
0.5–0.6
0.8–0.9
1.25–1.4
2
Termination
Resistance
Test
Current
(Amps)
2.0
3.0
4.5
6.0
8.0
10.0
Resistance
Milliohms
(Max. Init.)
4.0
4.0
4.0
3.5
3.5
3.0
Contact
Crimp
Tensile Force
Force (Min.)
lbs.
N
8
10
15
25
25
30
35.6
44.5
66.7
111.2
111.2
133.4
Note: This is the total resistance between wire crimps of a mated pin and
socket.
144
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.093 [2.36] Commercial Pin and Socket Connectors (Continued)
Contacts
Pin Diameter .093 [2.36]
Material
.780
[19.81]
.780
[19.81]
.010 [0.25] Stock Thickness
Pin and socket contacts can be used in
either plug or receptacle housings.
Related Product Data
Socket
Pin
Product Specification — 108-1038
.973
[24.71]
.973
[24.71]
Pin
Part No. 770385-1
Socket
Part No. 770383-1
Wire Size
AWG
mm2
24–18 0.2–0.9
Ins. Dia.
.110
2.79
20–14
Contact Insertion Tool
(For Pins and Sockets)
Part No. 91002-1
IS 408-7347
0.6–2
18–14 0.8–2
or
or
2
2
(18) (0.8–0.9)
Brass,
Pre-tin
Brass,
Gold2
Brass
Select Gold1
Brass,
Pre-tin
Brass,
Select Gold1
Phos. Brz.,
Pre-tin
HDM
Contact Part Numbers
Applicator Hand Tool
Pin
Socket
Part
Part No.
Strip Form Loose Piece Strip Form Loose Piece
No.
350418-1 770147-1
—
—
350418-51 770147-51
350416-1 770145-1
350417-1
770146-1
466656-15
350417-32 770146-32 466656-25 90872-1
466656-35
350417-51 770146-51
350415-1
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline
.140
3.56
Material
& Finish
Standard Density
Application Specification
114-49000
Performance Characteristics—
pages 143-144
Housings
.198 [5.03] Centerline—pages 146-147
.250 [6.35] Centerline—pages 148-149
Panel Cutouts
.198 [5.03] Centerline Housings—
page 147
.250 [6.35] Centerline Housings—
page 148
Technical Documents—pages 143
and 205-206
Application Tooling—pages 207-210
770144-1
466878-15
350416-51 770145-51 350415-51 770144-51 466878-25 90871-1
466878-35
—
—
350415-6 770144-6
.180
4.57
Brass,
Pre-tin
770530-14
—
770529-14
—
.180
4.57
(per
wire)
Brass,
Pre-tin
Phos. Brz.,
Pre-tin
770385-13
—
—
—
—
—
770383-13
—
567337-36
567337-46
567337-66
—
567273-27
567273-37
567273-47
—
1Select
Gold — .000030 [.000762] min gold in mating area over .000050 [.00127] min nickel.
[.000762] min gold in mating area, overall gold flash over .000050 [.00127] min nickel.
3These contacts have a .0125 [.318] stock thickness and accept two wires, each with maximum .180 [4.57] insulation
diameters. They can be used only with the following housing part numbers: 770364-1, 770365-1, 770450-1,
770451-1, 770452-1, and 770453-1 (see page 143).
4Contact length is .875 [22. 23]
5HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is
used on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210
for further information.
6HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -4 is
used on AMP-O-LECTRIC Model K Machine, -6 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210
for further information.
7HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is
used on AMP-O-LECTRIC Model K Machine, -4 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210
for further information.
2Gold — .000030
Contact Extraction Tool
Part No. 318837-1
IS 408-4375
Note: Phosphor bronze contacts should be used in high-temperature/humidity cycling applications.
Note: All part numbers are RoHS Compliant.
145
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.093 [2.36] Commercial Pin and Socket Connectors (Continued)
Housings
1 Circuit
Free-Hanging or Panel Mount
.360
[9.14]
.198 [5.03] Centerline spacing
Material
Housing —Nylon, natural color
Flammability Rating—
UL94-V-2
.240
[6.10]
.245
[6.22]
1.000
[25.40]
Related Product Data
.970
[24.64]
Receptacle
Plug
Contacts —page 145
Product Specification —108-1038
2, 3, and 4 Circuit, In-Line
Panel-Mount Flange
.198
[5.03] Typ.
A
A
Standard Density
198 Typ.
5.03]
.340
[8.64]
.240
[6.10]
1.125
[28.58]
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline
Receptacle
No. of
Circuits
1
2
3
4
(In-Line)
4
(Matrix)
5
6
(In-Line)
6
(Matrix)
9
12
15
A Dimension
Receptacle
Plug
—
.540
13.72
.670
17.02
.870
22.10
.443
11.25
1.070
27.18
1.268
32.21
.435
11.05
.670
17.02
.870
22.10
1.070
27.18
—
.640
16.26
.770
19.56
.970
24.64
.540
13.71
1.170
29.72
1.378
35.00
.535
13.59
.770
19.56
.970
24.64
1.170
29.72
1.095
[27.81]
Plug
Receptacle Part Numbers
Panel Mount
Free-Hanging
Without
With
Without
With
Detents
Detents
Detents
Detents
—
—
—
770063-1
770065-11,5
—
770066-11,5
—
7702661,3,5
770070-1
—
770071-1
—
770264-13
Plug Part Numbers
Panel
FreeMount
Hanging
—
770064-1
770068-11
770069-11
770073-1
770074-1
—
770076-1
—
770075-1
770077-1
770078-1
—
—
—
770843-1
—
770842-1
—
—
—
770083-1
794015-13
—
770084-1
—
—
—
770782-14
—
770892-14
770085-1
770087-1
770088-1
770086-1
770089-1
770090-1
770096-1
770091-1
770093-1
770094-1
770092-1
770095-12
770108-1
770097-1
770099-1
770100-1
770098-1
770101-1
770102-1
770103-1
—
770105-1
—
770106-1
770107-1
1.248
[6.30] centerline.
ears at wire end.
removable.
4Positive lock.
5600 V AC or DC
2Mounting
3Tool
Note: All part numbers are RoHS Compliant.
146
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.093 [2.36] Commercial Pin and Socket Connectors (Continued)
Housings
5 Circuit, In-Line
Free-Hanging or Panel Mount
.198 [5.03] Centerline spacing
Material
Housing —Nylon, natural color
Flammability Rating —
UL94V-2
.198
[5.03]
Typ.
.198
[5.03]
Typ.
1.070
[27.18]
1.170
[29.72]
Related Product Data
Contacts —page 145
1.125
[28.58]
.240
[6.10]
Product Specification —108-1038
.340
[8.64]
1.095
[27.81]
Receptacle (Free-Hanging)
Plug (Free-Hanging)
4, 6, 9, 12, and 15 Circuit, Matrix
.198
[5.03]
.198
[5.03]
Standard Density
.198
[5.03]
.198
[5.03]
.535 ± .010
[13.59 ± 0.25]
.430
[10.92]
1.000 ± .010
[25.4 ± 0.25]
.630
[16.0]
.735 ± .010
[18.67 ± 0.25]
Recommended
Panel Cutouts
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline
Receptacle
.970 ± .010
[24.64 ± 0.25]
Plug
A
No. of
Circuits
Maximum panel thickness is
.090 [2.29].
2
3
B
4
(In-Line)
6
9
12
15
A
.312
7.92
.312
7.92
.312
7.92
.600
15.24
.725
18.42
.725
18.42
.655
16.64
Panel Cutout Dimensions
Receptacle
B
A
.725
.375
18.42
9.53
.840
.375
21.34
9.53
1.038
.375
26.37
9.53
.718
.695
18.24
17.65
.828
.660
21.03
16.76
1.050
.760
26.67
19.30
1.240
.760
31.50
19.30
Plug
B
.800
20.32
.933
23.70
1.131
28.73
.750
19.05
.937
23.80
1.155
29.34
1.343
34.11
Note: The panel should be punched so that the housing enters in the same
direction as the punch.
147
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.093 [2.36] Commercial Pin and Socket Connectors (Continued)
Housings
3 Circuit, In-Line
Free-Hanging or Panel Mount
Panel-Mount
Flange
.250 [6.35] Centerline spacing
Material
Housing —Nylon, natural color
Flammability Rating —
UL94V-2
Voltage Rating—600 V AC or DC
Panel-Mount
Flange
.250
[6.35]
.250
[6.35] Typ.
.765
[19.43]
.862
[21.89]
.255
[6.48] Max.
Related Product Data
Contacts —page 145
1.140
[28.96]
.350
[8.89]
Receptacle
Product Specification —108-1038
Plug
4 Circuit, In-Line
Panel-Mount
Flange
250 Typ.
6.35]
Panel-Mount
Flange
.250
[6.35] Typ.
1.112
[28.24]
1.005
[25.53]
Standard Density
1.100
[27.94]
.255
[6.48]
1.140
[28.97]
.350
[8.89] Max.
Receptacle
1.100
[27.94]
Plug
6 Circuit, Matrix
545
3.84]
Max.
1.105
[28.07]
.250
[6.35]
1.145
[29.08]
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline
.250
[6.35] Typ.
.790
20.07]
.886
[22.50]
.250
[6.35] Typ.
Panel-Mount
Flange
Panel-Mount
Flange
.641
[16.28]
.250
[6.35]
Receptacle
Recommended
Panel Cutouts
A
Plug
Receptacle Part Numbers
Panel
FreeMount
Hanging
770269-1
770339-1
770771-11
770329-1
770337-1
770372-1
770360-1
No. of
Circuits
Maximum panel thickness is
.062 [1.57].
3
4
6
Note: The panel should be punched
so that the housing enters in the same
direction as the punch.
B
1Pre-bent
4
6
770338-1
770276-1
770330-1
770373-1
770336-1
770361-1
mounting ears.
No. of
Circuits
3
Plug Part Numbers
Panel
FreeMount
Hanging
Panel Cutout Dimensions
Receptacle
Plug
A
B
A
.310
.920
.365
7.87
23.37
9.27
.310
1.168
.365
7.87
29.67
9.27
.608
.946
.658
15.44
24.03
16.71
B
1.022
25.96
1.270
32.26
1.048
26.62
Note: All part numbers are RoHS Compliant.
148
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.093 [2.36] Commercial Pin and Socket Connectors (Continued)
Housings
Dual Wire
Free-Hanging or Panel Mount
2 Circuit, In-Line
.250 [6.35] Centerline spacing
.555
[14.10]
.248
[6.30]
.248
[6.30]
.545
[13.84]
Material
Housing —Nylon, natural color
Flammability Rating —
UL94V-2
Voltage Rating —600 V AC or DC
.650
[16.51]
.445
[11.30]
1.245
[31.62]
1.250
[31.57]
Receptacle
Plug
Related Product Data
Contacts —page 145
3 Circuit, In-Line
.350
[8.89]
Product Specification —108-1038
.255
[6.48] Max.
Panel-Mount
Flange
.250
[6.35] Typ.
Panel-Mount
Flange
.250
[6.35]
.765
[19.43]
.862
[21.89]
1.315
[33.40]
.500
[12.70]
Receptacle
No. of
Circuits
2
3
2See
Plug
Receptacle Part Numbers
Panel
FreeMount
Hanging
—
770364-11
770453-12
770451-1
Plug Part Numbers
Panel
FreeMount
Hanging
—
770365-11
770452-12
770450-1
[6.30] centerline.
panel cutout dimensions on page 58.
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline
1.248
1.275
[32.39]
Standard Density
.500
[12.70]
Positive Lock
2, 3 and 4 Circuit, In-Line
.248
[6.30]
.248
[6.30]
.536
[13.61]
.666
[16.92]
.255
[6.48]
1.073
[27.25]
1.041
[26.44]
Receptacle
No. of
Circuits
2
3
4
1.248
Plug
Receptacle Part Numbers
Free-Hanging
770424-11
770785-1
770784-1
Plug Part Numbers
Free-Hanging
770425-11
770783-1
770810-1
[6.30] centerline.
Note: All part numbers are RoHS Compliant.
149
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
150
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors
Product Facts
Fully polarized nylon
housings
■
Easy cavity identification
■
Locking devices are integral
part of design. Connector
halves will hold together
under severe conditions of
vibration and shock
■
Built-in contact stabilization
and self-aligning features
■
Hot side egg-crate design
for safety
■
Precision molded to exacting tolerances
■
Contacts accept a wire
size range of 30-14 AWG
[.05-2.0 mm2]
■
Keying plug available
■
“Clean” design contact —
no sharp projections to
impede insertion or damage
housings
■
Low insertion/extraction
forces
■
Contacts available in pre-tin
or gold over nickel plated to
fit the application requirements
Wire-to-PC Board capability
using pin or socket headers
■
Solderability—Headers meet
MIL-STD 202 method 208
■
Four circuit PC Board-to-PC
Board capability available
by mating vertical socket
header with either vertical,
right-angle or surface mount
pin header
■
Four circuit insulation displacement connector (IDC)
available
■
Ultraviolet (UV) stable
housings available in 1, 2
and 3 circuit
■
Not for interrupting current
■
Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
Technical Documents
The Commercial MATE-N-LOK
Connector performance characteristics
found on pages 151-152 are based on
free-hanging and panel mount connectors, loaded with contacts crimped on
stranded wire.
Dielectric Withstanding Voltage—
1.5 KVAC between adjacent circuits
Insulation Resistance—
500 megohms minimum initial between
adjacent circuits
Voltage Rating—250 V AC or DC
Connector Mating—
4 lb. max. per circuit
Connector Unmating—
0.7 lb. min. per circuit
Contact Retention—15 lb. min.
per contact
Durability—50 cycles, mating and
unmating
Product Specifications
108-1000 Commercial MATE-N-LOK
Connectors
108-1077 Commercial MATE-N-LOK
PC Board Headers
108-49000 IDC Connectors
Application Specifications
114-1012 Commercial MATE-N-LOK
Contacts
114-49001 IDC Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
■
Performance Characteristics
Standard Density
■
Instruction Sheets
408-7209, 408-7166, 408-7200,
408-7201, 408-7215, 408-3186,
408-7300
R
■
Certified by
Canadian Standards
Association,
File No. LR 7189A
R
151
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
Performance
Characteristics (Continued)
Maximum Current—Maximum current rating of Commercial MATE-N-LOK
connectors is limited by the maximum
operating temperature of the housings
which is 105°C including the temperature rise of the contacts which is a
maximum of 30°C. There are several
variables which have a direct effect on
this maximum current-carrying capability for a given connector and must
be considered for each application.
These variables are:
Wire Size—Larger diameter wire will
carry more current since it has less
internal resistance to current flow and
thus generates less heat. Longer wire
lengths also enhance current-carrying
capabilities since the wire conducts heat
away from the connector.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Standard Density
Printed Wiring Board Conductor
Size—The finished trace conductor
width and thickness should be maximized to allow for the greatest currentcarrying capacity and heat dissipation.
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
Wire-to-Wire
Motor Mount Calculated Current Table
Number of
Circuits
6
8
10
12
16
Wire Gauge
14
13.00
12.00
11.00
10.50
9.50
Vibration—10-55-10 cycles per
minute at .06 inch total excursion
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
Physical Shock—18 drops,
50 G sawtooth at 11 milliseconds
Housing Panel Mount Retention—
40 lb. min. 3 and 4 circuit
65 lb. min. 6, 9, 12, and 15 circuit
Housing Lock Strength with
Positive Locking Devices
Engaged—
25 lb. min.
Thermal Shock— -55°C to +85°C
18
9.50
8.50
8.00
7.50
7.00
20
7.50
7.00
6.50
6.00
5.50
22
6.00
5.50
5.00
5.00
4.50
24
5.00
4.50
4.50
4.00
3.50
30
2.50
2.50
2.00
2.00
2.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully loaded housings
being 100% energized. Note: All combinations were not tested, and this chart contains interpolated and extrapolated values.
Calculated Current Table
Wire Gauge
Number of
Circuits
14
16
18
20
22
24
30
1
2
3
4
6 Matrix
8
9
10
12
15
19.00
18.00
16.00
15.00
13.00
12.50
11.00
12.00
10.50
9.50
15.50
14.50
13.00
12.50
10.50
10.50
9.00
9.50
8.50
8.00
14.00
13.00
12.00
11.00
9.50
9.00
8.00
8.50
7.50
7.00
11.00
10.50
9.50
9.00
7.50
7.50
6.50
7.00
6.00
5.50
9.00
8.50
7.50
7.00
6.00
6.00
5.50
5.50
5.00
4.50
7.50
7.00
6.50
6.00
5.00
5.00
4.50
4.50
4.00
4.00
4.00
4.00
3.50
3.00
3.00
2.50
2.50
2.50
2.00
2.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully loaded housings
being 100% energized. Note: All combinations were not tested, and this chart contains interpolated and extrapolated values.
Wire-to-Board
Commercial MATE-N-LOK connectors
also will withstand the following tests:
16
10.50
9.50
9.00
8.50
8.00
Minimum Wire Lengths for T-Rise vs. Current Testing
Due to the vast differences in trace
geometry and printed circuit board
configurations, we are unable to
provide a separate current carrying
chart for our printed circuit board
header products. However, the
above Wire-to-Wire charts may be
used as a guideline for headers if
the trace width and thickness is
equal to the listed wire gauge. For
vertical headers, only 95% of the
Wire-to-Wire value should be used.
For right-angle headers, only 75% of
the Wire-to-Wire value should be
used. The chart values are only a
tool for connector selection and will
require the customer to fully test
their application.
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
AWG
30
28
26
24
20
Min. Length (in.)
2.6
3.2
4.1
5.1
7.8
Product Specifications
108-1000 Commercial MATE-N-LOK
Connectors
108-1077 Commercial MATE-N-LOK
PC Board Headers
Min. Length (in.)
9.4
11.3
13.7
16.4
19.3
Note: If wire lengths used are less than those listed above, the current carrying ability of the system will be reduced due to less heat being conducted
away from the connector. The customer should fully test all applications.
Termination Resistance/Contact Crimp Tensile Force
Wire Size
AWG
mm2
Corrosion—48 hr. at 5% salt
concentration
Related Product Data
AWG
18
16
14
12
10
30
28
26
24
22
20
18
16
14
.05
.08
.12
.2
.3
.5
.8
1.2
2.0
Termination
Resistance
Test
Resistance
Current
Milliohms
(Amps)
(Max. Init.)
.50
.75
1.00
1.5
3
4.5
6
8
10
4.00
3.50
3.50
3.50
3.50
3.00
3.00
2.75
2.75
Contact
Crimp
Tensile Force
Force (Min.)
lbs.
N
2
9
3
13
7
31
10
44
15
67
20
89
30
133
30
133
35
156
Note: This is the total resistance between wire crimps of a mated pin and socket.
152
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
Commercial MATE-N-LOK Connector Mating Combinations
Connector Part Number
Number
of
Circuits
Flammability Style
Rating
Housing
Type
Connector
Part No.
Socket: FH
1-480349-0
Socket: FH
UV Stable
1-480400-0
Housing
Part No.
Housing
Type
1-480350-0
1
UL94V-2
In-Line
Socket: FH
2
UL94V-2
In-Line
Socket: FH
UV Stable
Socket: FH
Positive Lock
3
UL94V-2
In-Line
1-480303-0
1-480304-0
Socket: FH
Positive Lock
1-480721-0
Socket: FH
Positive Lock
Socket: PM
Positive Lock
Pin: PM
Positive Lock
8
UL94V-2
Dual
Row
Socket: FH
Positive Lock
UL94V-2
Matrix
Pin: PM
Positive Lock
10
UL94V-2
Dual
Row
Socket: FH
Positive Lock
12
Dual
Row
Socket: MM
Positive Lock
Matrix
Pin: PM
Positive Lock
UL94V-2
15
UL94V-2
Matrix
Pin: PM
Positive Lock
16
UL94V-2
Dual
Row
Socket: MM
Positive Lock
—
—
—
—
—
—
—
1-480319-0
Pin: FH
Pre-tin
Duplex1
350209-1
1586512-2
350422-1
—
794120-1
—
—
—
—
—
1-480498-1
Pin: FH
UV Stable
Pin: FH
794012-1 Positive Lock
1-480305-0
Pin: FH
—
—
—
1-480387-0
—
—
—
—
—
—
—
—
—
Pre-tin
Duplex1
Pre-tin
Duplex1
—
Pre-tin
Duplex1
350539-1
1586530-2
350210-1
1586514-2
—
350541-1
1586532-2
350540-1
—
350423-1
—
—
350542-1
—
—
—
643488-1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
350425-1
—
—
—
1586526-2
—
—
—
—
—
—
—
—
—
—
—
—
—
350641-1
—
—
—
350576-1
—
350426-1
—
—
—
1586528-2
—
—
—
—
—
—
—
350642-1
—
350577-1
—
350219-1
—
—
—
—
—
—
—
350220-1
1586524-2
—
—
—
—
350427-1
1586529-2
—
—
—
—
—
—
—
—
—
—
350643-1
—
350644-1
—
—
—
—
—
350578-1
—
350579-1
—
—
—
Pin: FH
—
—
UV Stable
See next page for 4 position mating combinations
Pin: FH
1-480340-0 Positive
Pre-tin
1-380999-0
Lock
1-480270-0
Pin:
MM
1
1-480271-0
Duplex
2-1586546-0
Positive Lock
Pre-tin
—
Pin: PM
1-480273-0
1-480276-0 Positive Lock
Duplex1
—
Pre-tin
—
Socket: PM
1-480276-0
1-480273-0 Positive Lock
Duplex1
—
Pin: FH
1-480345-0 Positive
Pre-tin
350212-1
Lock
1-480283-0
Pin:
MM
1-480284-0
Duplex1
1586518-2
Positive Lock
Pre-tin
—
Socket: PM
1-480277-0
1-480274-0 Positive Lock
Duplex1
—
Pin: FH
1-480339-0 Positive
Pre-tin
1-380991-0
Lock
1-480285-0
Pin:
MM
1
1-480286-0
Duplex
2-1586544-0
Positive Lock
Pre-tin
350213-1
Pin: MM
1-480287-0
1-480288-0 Positive Lock
Duplex1
1586520-2
Pre-tin
—
Socket: PM
1-480278-0
1-480275-0 Positive Lock
Duplex1
—
Pre-tin
—
Socket: PM
1-480324-0
1-480323-0 Positive Lock
Duplex1
—
Pre-tin
350214-1
Pin: MM
1-480438-0
1-480439-0 Positive Lock
Duplex1
1586522-2
1-480388-0
—
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
9
1-480351-0
Standard Density
Matrix
1-480720-0
Socket: FH
4
UL94V-2
1-480393-1
Socket: PM
Socket: FH
UV Stable
6
1-480318-0
Pin: FH
Pin: FH
Positive Lock
Pin: FH
1-480401-1
UV Stable
Mating Connector Part Number
PC Board Headers
Vertical
Vertical
Pin
Socket
Right-Angle
Plating
Pin
Standard
Long
Standard
Long
Tail
Tail
Tail
Tail
—
—
—
—
—
—
FH: Free-Hanging
PM: Panel Mount
MM: Motor Mount
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact.
Note: All part numbers are RoHS Compliant.
153
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Right-Angle
Pin Header
770827-1
794132-1
794036-1
794036-2
794036-3
794036-4
1-641737-1
794132-1
1-480426-0
770156-2
770156-3
770156-4
770156-5
770526-1
Insulation
Displacement
Connector
(IDC)
770827-1
1-480426-0
770997-1
794287-12
Socket
Header
Socket
Housing
Insulation
Displacement
Connector
(IDC)
3-480425-0
3-480426-0
Pin Housing
Detent Lock
High Temp
1-480425-0
1-480424-0
1-480426-0
—
Housing
Part No.
Socket
—
Pin
Pin
Pin
Socket
High
Temp
Socket
PM
Socket
Pin
—
Housing
Type
Pre-tin
Pre-tin
Pre-tin
Duplex1
Pre-tin
Pre-tin
—
Duplex1
Pre-tin
Duplex1
Pre-tin
Pre-tin
Duplex1
Plating
Socket Connectors
794036-1
794036-2
794036-3
794036-4
—
—
—
—
—
—
—
770156-2
770156-3
770156-4
770156-5
770526-1
—
—
—
18
20
22
16
—
—
—
—
—
—
—
22
18
20
16
18
—
—
—
Insulation
Displacement AWG
Connector
—
—
—
—
—
—
—
—
770997-1
794287-12
—
—
—
—
PC Board
Vertical
Socket
Header
794236-1
—
—
1586515-2
350211-1
350211-1
—
—
—
1586515-2
770328-13
350211-1
350543-1
1586534-2
Vertical
Standard
Tail
Note: All part numbers are RoHS Compliant.
1Duplex
—
—
—
1586525-2
350424-1
350424-1
—
—
—
1586525-2
350424-1
350544-1
1586536-2
Long
Tail
—
—
—
—
770829-1
770829-1
—
—
—
—
770829-1
—
—
Surface
Mount
—
1-641737-1
1-641737-1
—
641737-1
770846-1
641737-1
770846-1
—
—
—
—
770846-1
641737-1
—
—
Standard
PC Board Pin Headers
(Note: These connectors are used by the disk drive industry.)
Mating Connector Part Number
PM: Panel Mount
Finish — Plated with .000030 [.000762] min. gold in matting area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact.
2Surface Mount Compatible.
3With Drainholes
UL94V-0
UL94V-2
1-480424-0
Socket
Housing
Detent
Lock
1-480426-0
1-480772-0
Socket
Housing
Positive Lock
Pin
Housing
Detent
Lock
Connector
Part No.
Connector
Type
Connector Part Number
Flammability
Rating
Standard Density
Commercial MATE-N-LOK 4 Position In-Line Mating Combinations
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
—
—
—
—
174804-1
174804-1
—
—
—
—
174804-1
—
—
Right-Angle
W/Fixed
Belt
—
—
—
—
174552-1
174552-1
—
—
—
—
174552-1
—
—
W/Fixed Belt
Reverse Pol.
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
154
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
Contacts
Pin diameter .084 [2.13]
Stock thickness .012 [.305]
These contacts are to be used in
Commercial MATE-N-LOK housings
only.
Related Product Data
Product Specification
108-1000 Commercial MATE-N-LOK
Connectors
.805
[20.44]
Application Specification
114-1012 Commercial MATE-N-LOK
Contacts
Performance Characteristics—
pages 151-152
Housings—pages 157-159
Technical Documents—pages 151
and 205-206
Application Tooling—pages 207-210
.695
[17.65]
Pin
Socket
Contact Part Numbers
Ins. Dia.
Range
30-22
[.05-.3]
.040-.075
1.02-1.91
24-18
[.2-.8]
.060-.100
1.52-2.54
20-14
[.5-2.0]
.100-.130
2.54-3.30
Material & Finish
Brass, Pre-tin
Phos. Brz., Pre-tin
Brass, Gold1
Brass, Pre-tin
Phos. Brz., Pre-tin
Brass, Gold1
Phos. Brz., Select Gold2
Brass, Select Gold2
Brass, Pre-tin
Phos. Brz., Pre-tin
Brass, Gold1
Phos. Brz., Gold1
Brass, Select Gold2
Strip Form
350079-1
350079-4
350079-5
61116-1
61116-4
61116-5
61116-6
61116-7
61118-1
61118-4
61118-5
61118-6
61118-7
Loose Piece
61174-1
—
61174-5
60618-1
60618-4
60618-5
60618-6
—
60620-1
60620-4
60620-5
—
—
Brass, Pre-tin
Phos. Brz., Pre-tin
350558-1
350558-4
350639-1
—
Socket
Strip Form
Loose Piece
350078-1
61173-1
350078-4
61173-4
350078-5
61173-5
61314-1
60617-1
61314-4
60617-4
61314-5
60617-5
61314-6
60617-6
61314-7
—
61117-1
60619-1
61117-4
60619-4
61117-5
60619-5
61117-6
60619-7
61117-7
—
350557-1
350557-4
—
350638-4
HDM
Applicator
Part No.
Hand Tool
Part No.
466426-13
466426-23
466426-33
91515-1
466320-13
466320-23
466320-43
91512-1
91528-14
687763-13
687763-23
687763-63
91504-1
687898-13
687898-23
687898-43
91504-1
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
(2) 18 [.8] or (2) .115 Max.
(1) 18 [.8] and
2.92
(1) 16 [1.2]
(stacked)
Pin
Standard Density
Wire Size
Range
AWG [mm2]
1Gold
Finish — Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact.
Gold Finish — Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact.
3HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K
Machine; -3, -4, or -6 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information.
4Use Hand Tool No. 91528-1 for .043-.075 [1.09-1.90] insulation diameter.
Notes:
1. Extraction Tools: Pins — No. 1-305183-1 (IS 408-7158); Sockets — No. 1-305183-2 (IS 408-7158); Pins and Sockets — No. 465644-1 (IS 408-7211)
2. Insertion Tools: No. 455830-1 (IS 408-7984)
2Select
Commoning Tabs
.170
[4.32]
Material and Finish
Number of
Holes
2
A
Brass, tin plated
Stock thickness .008 [.203]
2
B
.008
[.203]
3
3
Dimensions
A
.377
9.58
.355
9.02
.579
14.71
.550
13.97
B
.203
5.16
.195
4.95
.203
5.16
.195
4.95
Part
Number
60843-1
350444-1
60842-1
350444-2
Note: Commoning tabs are designed to be used with pin housings.
Note: All part numbers are RoHS Compliant.
155
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
Contacts
PC Board Contacts
Pin diameter .084 [2.13]
Stock thickness .012 [.305]
These contacts are to be used in
Commercial MATE-N-LOK housings
only.
L
L
Related Product Data
Product Specification
108-1000 Commercial MATE-N-LOK
Connectors
Application Specification
114-1012 Commercial MATE-N-LOK
Contacts
Performance Characteristics—
pages 151-152
Housings—pages 157-159
Technical Documents—pages 151
and 205-206
Application Tooling—pages 207-210
Socket
Pin
PC Board
1For
2For
Part Numbers
L Dim.
Type of Contact
Material & Finish
Pin
Loose Piece
Socket
Loose Piece
Pin
Socket
1.110
[28.19]
1.010
[25.65]
Phos. Brz., Pre-tin
61518-11
61320-11
1.210
[30.73]
1.110
[28.19]
Phos. Brz., Pre-tin
350074-12
350073-12
.062 [1.57] max. board thickness — Board hole size .057 [1.45]
.125 [3.14] max. board thickness — Board hole size .057 [1.45]
Grounding Pin
.900
[22.86]
(.095 [2.41] longer than standard pin)
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
Standard Density
(Mate first, break last, not for interrupting
current)
Wire Size Range
AWG [mm2]
Ins. Dia.
Range
Material & Finish
24-18
[.2-.8]
.060-.100
1.52-2.54
Brass, Pre-tin
Contact Part Numbers
Strip Form
Loose Piece
61527-2
—
HDM
Applicator
Part No.
466320-11
466320-21
466320-41
Hand Tool
Part No.
91512-1
1HDM
Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is
used on AMP-O-LECTRIC Model K Machine; -3, -4, or -6 is used on AMP-O-LECTRIC Model G Machine. See
pages 207-210 for further information.
Keying Plug
1.000
[2.54]
IS 408-7582
Material
Part Number
200821-1
Note: Keying plug snaps into socket housing
Housing — Nylon, natural color
Flammability Rating — UL94V-2
Note: All part numbers are RoHS Compliant.
156
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
Housings
1 Circuit
Free-Hanging
.200 [5.08] Centerline spacing
Material
B
Housing —Nylon, natural color
E
A
D
Socket Housing (Plug)
Pin Housing (Cap) Detent Lock
Flammability Rating —UL94V-2
Related Product Data
Product Specification
108-1000 Commercial MATE-N-LOK
Connectors
Performance Characteristics—
pages 151-152
Contacts—pages 155-156
Commoning Tabs—page 155
Keying Plug—page 156
Technical Documents—pages 151
and 205-206
Mating Pin Headers—pages 161-164
Mating Socket Headers—page 162
Mating IDC—page 163
B
A
Pin Housing (Cap) Positive Lock
2, 3 and 4 Circuit,
In-Line
B
C
E
F
.200
[5.08]
A
D
Number of
Circuits
1
3
4
B
1.200
30.48
1.240
31.49
1.325
33.65
.930
23.62
.930
23.62
.930
23.62
.930
23.62
.930
23.62
—
—
Dimensions
C
D
.260
—
6.60
.260
—
6.60
.260
—
6.60
.330 .530
8.38 13.46
.330 .530
8.38 13.46
.325 .825
8.25 20.95
.325 .825
8.25 20.95
.330 1.030
8.38 26.16
1.030
—
26.16
Socket Housing (Plug)
E
.870
22.10
.870
22.10
.995
25.27
.860
21.84
.860
21.84
.850
21.60
.850
21.60
.850
21.60
.850
21.60
Part Numbers
Socket Housing (Plug)
F
Pin Housing (Cap)
—
1-480350-01
1-480349-0
—
1-480351-02
1-480349-0
—
1-480401-01,3
1-480400-03
.295
7.49
.295
7.49
.290
7.37
.290
7.37
.310
7.88
.310
7.88
1-480319-01,5
1-480318-05
1-480498-11,3,5
1-480393-13,5
1-480305-01,5
1-480303-05
1-480387-01,3,5
1-480388-03,5
1-480426-01,5,6
1-480424-05,6
794132-14,5,6
770827-14,5,6
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
2
A
.300
7.62
.300
7.62
.300
7.62
.610
15.49
.610
15.49
.810
20.57
.810
20.57
1.010
25.65
Standard Density
Pin Housing (Cap)
1Detent
lock
lock
Stable black color
4Housing Material UL94V-0 rated
5Housing accepts double wire applications where individual insulation diameters do not exceed .115 [2.92].
6Used by the disk drive industry.
2Positive
3UV
Note: All part numbers are RoHS Compliant.
157
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
Housings
Free-Hanging, Positive Lock
2, 3, and 4 Circuit,
In-Line
.850
[21.59]
.375
[9.52]
.200 [5.08] Centerline spacing
A
Material
.200
[5.08]
Housing —Nylon, natural color
Flammability Rating —UL94V-2
.150
[3.81]
Socket Housing (Plug)
Number of
Circuits
A
Dim.
2
.435
11.04
.630
16.00
.830
21.09
3
4
1Used
Socket Housing
(Plug)
Part Numbers
Mates with
Pin Headers
Mates with
Cap Housing
1-480720-0
350539, 350540
794012-1
1-480721-0
350541
—
1-480722-01 3505431, 3505441
—
by the disk drive industry.
6 Circuit, Dual Row
.930
[23.62]
.785
[19.94]
.850
[21.59]
.725
[18.41]
.195
[4.95]
Standard Density
A
D
.360
[9.14]
Socket Housing (Plug)
Pin Housing (Cap)
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
8 and 10 Circuit, Dual Row
.725
[18.42]
.850
[21.60]
.930
[23.62]
.785
[19.94]
.195
[4.95]
A
D
.360
[9.14]
Related Product Data
Product Specification
108-1000 Commercial MATE-N-LOK
Connectors
Performance Characteristics—
pages 151-152
Contacts—pages 155-156
Commoning Tabs—page 155
Keying Plug—page 156
Technical Documents—pages 151
and 205-206
Mating Headers—pages 161-164
Pin Housing (Cap)
Number of
Circuits
6
8
10
1Housing
Socket Housing (Plug)
Dimensions
A
.705
17.91
.900
22.86
1.095
27.81
D
.610
15.49
.805
20.44
1.000
25.40
Pin Housing (Cap)
Part Numbers
Socket Housing (Plug)
1-480340-0
1-480270-01
1-480345-0
1-480283-01
1-480339-0
1-480285-01
accepts double wire applications where individual insulation diameters do not exceed .115 [2.92].
Note: All part numbers are RoHS Compliant.
158
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
Housings
3 and 4 Circuit, In-Line
Panel Mount, Positive Lock
E
.850
[21.59]
.930
[23.62]
.200
[5.08]
.310
[7.87]
Material
Housing —Nylon, natural color
G
F
Flammability Rating —UL94V-2
Related Product Data
Product Specification
108-1000 Commercial MATE-N-LOK
Connectors
Performance Characteristics—
pages 151-152
Contacts—pages 155-156
Commoning Tabs—page 155
Keying Plug—page 156
Technical Documents—pages 151
and 205-206
Mating Socket Headers—page 162
Mating IDC—page 163
Recommended Panel
Cutout for Panel Mount
Socket Housing
Pin Housing (Cap)
6, 9, 12 and 15 Circuit,
Matrix
.850
[21.59]
F
G
Pin Housing (Cap)
6
—
9
—
12
—
15
—
Part Numbers
Pin Housing (Cap) Socket Housing (Plug)
1-480305-02
1-480304-0
1-480426-02,4
3-480426-01,2,4
1-480425-04
3-480425-01,4
1-480276-03
1-480273-0
1-480277-03
1-480274-0
1-480278-03
1-480275-0
1-480324-03
1-480323-0
1Housing
material has 125°C temperature rating
lock
3Positive lock
4Used by disk drive industry
2Detent
Note: All part numbers are RoHS Compliant.
6, 9, 12 and 15 Circuit,
Matrix
.219
[5.56]
.660
[16.76]
C
B
4
3
Dimensions
F
G
.810 .630
20.57 16.00
1.010 .825
25.65 20.96
.665 .555
16.89 14.10
.905 .795
22.99 20.19
1.145 1.045
29.08 26.54
1.382 1.280
35.10 32.51
C
A
Number
Circuits
3
.218
[5.54]
4
6
A
.015
R Max.
[.381]
All Corners
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
1. Recommended panel thickness—
.025-.065 [.635-1.65].
2. Both locking legs are to be
squeezed together and the housing is to be inserted “straight-in”,
as opposed to a rocking manner.
3. The panel should be punched so
that the housing enters the panel
in the same direction as the
punch.
4. The panel must not have any
material (paint, porcelain, etc.)
applied in the mounting hole area
that would decrease the retention
of the housing in the panel.
5. If the two items above are not
complied with, the “A” dimension
should be reduced .020 [5.08] for
proper retention.
E
.325
8.26
.330
8.38
Socket Housing (Plug)
Standard Density
Number of
Circuits
.275
[6.98]
.650
[16.51]
.202
[5.130]
Mounting Information
.215
[5.46]
.850
[21.59]
.930
[23.62]
.240
[6.09]
View is from socket housing entry
side
3 and 4 Circuit, In-Line
Socket Housing (Plug)
9
B
D
12
15
D
.015
R Max.
[.381]
All Corners
Dimensions
A
B
.890
.645–.635
22.61 16.38–16.13
1.100 .845–.835
27.94 21.46–21.21
.840
.575–.570
21.34 14.61–14.48
1.075 .815–.810
27.31 20.70–20.57
1.320 1.055–1.050
33.53 26.80–26.67
1.550 1.290–1.285
39.37 32.77–32.64
Note: Dimensions “C” and “D” are to
be equal.
159
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
Motor Mount, Positive Lock
6, 8, 10, 12 and 16 Circuit,
Dual Row
.785
[19.94]
.725
[18.41]
.850
[21.59]
.930
[23.62]
F
E
.195
[4.95]
.360
[9.14]
Pin Housing (Cap)
8
Standard Density
10
12
16
Part Numbers
Pin Housing (Cap) Socket Housing (Plug)
UL94V-2 Nylon, Natural Color
Dimensions
E
F
Number of
Circuits
6
Socket Housing (Plug)
.705
17.90
.900
22.86
1.095
27.81
1.290
32.77
1.680
42.67
.610
15.49
.805
20.45
1.000
25.4
1.195
30.35
1.585
40.26
1-480271-0
1-480270-01
1-480284-0
1-480283-01
1-480286-0
1-480285-01
1-480288-0
1-480287-0
1-480439-0
1-480438-0
1Housing
accepts double wire applications where individual insulation diameters do not exceed .115 [2.92].
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
Note: All part numbers are RoHS Compliant.
Recommended
Panel Cutout for
Motor Mount
Pin Housing
.015
R Max.
[.381]
All Corners
6
A
E
A
View is from pin housing entry
side.
Number of
Circuits
8
R
10
12
A
.585
[14.86]
T
16
Section A-A
A
Dim.
.715
18.16
.910
23.11
1.105
28.07
1.300
33.02
1.690
42.93
Mounting Information
Note: Motor mount housings may be used in
flat panels
1. Recommended panel thickness
“E” is .040-.100 [1.02-2.54] and is
dependent on “T” and “R”.
2. The pin housing must be inserted
in a rocking manner.
3. The panel must be punched so
that the housing enters the panel
in the same direction as the
punch.
160
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
PC Board Vertical Pin
Headers
2, 3, and 4 Circuit,
In-Line
.330
[8.38]
Material
Housing — Nylon, natural color
Flammability Rating — UL94V-2
Contacts — Phosphor bronze
Solder tail diameter .062 [1.57]
Related Product Data
Product Specifications
108-1077 Commercial MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 151-152
Technical Documents—pages 151
and 205-206
Mating Socket Housings—
pages 157-160
Mating Socket Headers—page 162
Mating IDC—page 163
.375
[9.52]
.330
[3.38]
.375
[9.52]
.070
[1.78] Dia. Typ.
.200
Typ.
[5.08]
A
A
Positive Lock
Recommended PC Board Hole Layout
Mounting Dimensions
Detent Lock
6, 8, 10, 12 and 16 Circuit,
Dual Row
.070 Dia. Typ.
[1.78]
.375
[9.14]
.785
[19.93]
.360
[9.14]
A
Recommended PC Board Hole Layout
Mounting Dimensions
Positive Lock
A
Dim.
2
.515
13.09
Type
Lock
Positive
Detent
Positive
3
.715
18.17
Detent
Positive
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
.915
23.24
Detent
6
.705
17.91
Positive
8
.900
22.86
Positive
10
1.095
27.81
Positive
12
1.290
32.77
Positive
16
1.680
42.68
Positive
Post-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Part Numbers
Standard2
Long3
Tail
Tail
350539-1
350540-1
1586530-2
—
350209-1
350422-1
1586512-2
—
350541-1
350542-1
1586532-2
—
350210-1
350423-1
1586514-2
—
350544-15
350543-15
1586534-25
1586536-25
350211-15
350424-15
794236-15,8
1586627-15,6
1-1586627-15,6,7
1586515-25
1586525-25
1-380999-0
350425-1
2-1586546-0
1586526-2
350212-1
350426-1
1586518-2
1586528-2
1-380991-0
350219-1
2-1586544-0
—
350213-1
350220-1
1586520-2
1586524-2
350214-1
350427-1
1586522-2
1586529-2
Mates with
Socket Housing
Part Number
1-480720-0
1-480318-0
1-480721-0
1-480303-0
1-480722-05
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
4
Finish
Standard Density
Number of
Circuits
.195 Typ.
[4.95]
1-480424-04,5
1-480270-0
1-480283-0
1-480285-0
1-480287-0
1-480438-0
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
2Use standard tail for .062 [1.57] thick PC Board.
3Use long tail for .125 [3.18] thick PC Board.
4Other mating connectors include a vertical PC Board socket header and the insulation displacement connectors (IDC).
5Used by the disk drive industry.
6With drain holes.
7Tube loaded.
8Housing material UL94V-0 rated.
Note: All part numbers are RoHS Compliant.
161
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
PC Board Surface Mount
Right-Angle Pin Header
.375
[9.53]
4 Circuit, In-Line
.484
[12.30]
Housing
1.000
[25.40]
1
2
3
4
Housing — Nylon, black color
Flammability Rating — UL94V-2
Contact — Phosphor bronze, pre-tin
Solder tail width .052 [1.32]
.100 .100
[2.54] [2.54]
Contact
Material and Finish
.330
[8.38]
.120
[3.05]
.100
Dia.
[2.54]
.440
[11.18]
.824
[2093]
.170
[4.32]
.070
Dia. Typ.
[1.78]
.200
Typ.
[5.08]
Recommended PC Board Hole Layout
.062 [1.57] thick PC Board
1
A
Recommended PC Board Layout
.062 [1.57] thick PC Board
4
.200
[5.08]
Typ.
Material
.015
[0.38]
Note: .010 [.25] min. thick solder paste,
63/27 tin
3
.245
[6.22]
.100
[2.54] Typ.
2
4 Circuit, In-Line
.150
Min.
[3.8]
See
Note
.153
[3.89]
Notes:
1. Mating parts include socket housings, a
vertical PC Board socket header below and
the insulation displacement connectors (IDC).
2. Used by the disk drive industry.
Housing — Nylon, natural color
Flammability Rating — UL94V-2
Contacts—Phosphor bronze
Solder tail diameter .062 [1.57]
.125
Dia.
[3.18]
2 Plcs.
.075 .350
.300
[1.91] [8.89]
[7.62]
.300
[7.62]
Part Number
770829-1
PC Board Vertical
Socket Headers
.375
[9.53]
Standard Density
6, 9, 12 and 15 Circuit,
Matrix
.070
[1.78] Dia. Typ.
15
14
13
12
11
10
.240
Typ.
[6.09]
A
9
8
7
6
5
4
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
3
2
.645
[16.38]
.470
[11.94]
Recommended PC Board Hole Layout
.062 [1.57] thick PC Board
Part Numbers
Standard Tail5
Long Tail6
Mates with
Pin Housing
Part Number
Number of
Circuits
A
Dim.
Finish
4
1.000
25.40
Pre-tin
6
.720
18.29
Pre-tin
Duplex1
9
.960
24.39
Pre-tin
350642-1
350577-1
1-480277-0
12
1.200
30.49
Pre-tin
350643-1
350578-1
1-480278-0
15
1.440
36.58
Pre-tin
350644-1
350579-1
1-480324-0
Related Product Data
Product Specifications
108-1077 Commercial MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 151-152
Technical Documents—pages 151
and 205-206
Mating Pin Housings—pages 157-160
Mating Pin Headers—pages 161-164
Mating Socket Housings—
pages 157-160
Mating Socket Headers—page 162
Mating IDC—page 163
.202
[5.13]
1
770997-13
794285-13,7
794287-13,4,8
350641-1
1586539-2
—
—
—
350576-1
—
1-480426-02,3
1-480276-0
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over
.000050 [.00127] min. nickel underplate on entire contact.
2Other mating connectors include vertical, right-angle and surface mount PC Board pin headers.
3Used by the disk drive industry.
4Surface mount compatible.
5Use standard tail for .062 [1.57] thick PC Board.
6Use long tail for .125 [3.18] thick PC Board.
7Low Mating Force
8High Temperature
Note: All part numbers are RoHS Compliant.
162
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
PC Board Right-Angle
Pin Headers
2, 3, and 4 Circuit, In-Line
2, 3, and 4 Circuit
.345
[.876]
.484
[12.29]
.300
[7.62]
.157
[3.99]
2 Plc.
Material and Finish
Contact — Phosphor bronze, pre-tin
Solder tail width .052 [1.32]
A
.140 Typ.
[3.55]
Number of
Circuits
3
.600
15.24
.800
20.32
4
1.000
25.40
2
C
B
.100 Dia.
[2.54]
(2 Plcs.)
.400
[10.16]
.100
[2.54]
.200
[5.08]
Typ.
.060 Dia.
[1.524]
(4 Plcs.)
Recommended PC Board Hole Layout
.062 [1.57] thick PC Board
Dimensions
B
C
A
.100
[2.54]
.100
[2.54]
2 Plc.
.100
[2.54]
.060
[1.52]
2 Plc. .200
[5.08]
.157 Dia.
[3.98]
(2 Plcs.)
D
.150
[3.81]
Dia.
Mates with
Socket Housing
Part Number
Part
Numbers
Housing Material
D
—
UL94V-2 Nylon
Natural Color
794120-1
1-480318-0
.150
3.81
.300
7.62
.300
7.62
.600
15.24
UL94V-0 Nylon
643488-1
1-480303-0
.200
5.08
.400
10.16
.800
20.32
UL94V-2 Nylon,
Natural Color
641737-13
770846-11,3
1-480424-02,3
—
UL94V-0 Nylon
1-641737-13
770827-12,3
1Surface
Mount Compatible. 2Other mating connectors include a vertical PC Board socket header and the insulation
displacement connectors (IDC). 3Used by the disk drive industry.
Dust Covers
.325 Max.
[8.25]
Material
.505
Max.
[12.82]
Flammability Rating — UL94V-2
.142 Max.
[3.60]
.760
[19.30]
.142
[3.60]
Max.
For Feed-To Wiring
Part Number 770232-1
Standard Density
.505 Max.
[12.82]
Housing — Polyester, white color
.760
[19.30]
For Feed-Through Wiring
Part Number 770233-1
Note: These parts are used with the insulation displacement connectors below.
Insulation Displacement
Connectors (IDC)
4 Circuit, In-Line
Material
.200
[5.08]
Housing — Nylon
Contact — Phosphor bronze
.830
[21.08]
Max.
.643
[16.33]
Max.
.390
[9.90]
Related Product Data
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
.994
[25.24]
Socket Assembly (Plug)
Used by the disk drive industry.
Product Specifications
108-1077 Commercial MATE-N-LOK
PC Board Headers
108-49000 IDC Connectors
Application Specification
114-49001 IDC Connectors
Performance Characteristics—
pages 151-152
Technical Documents—
pages 151 and 205-206
Mating Socket Housings—
pages 157-160
Mating Pin Housings— pages 157160
Mating Pin Headers— pages 161-164
Wire Size Range
AWG [mm2]
Part Number
UL94V-2
UL94V-0
Color
Code
Finish
Red
Pre-tin
770156-2
794036-3
22
[.3]
20
[.5]
18
[.8]
Yellow
Pre-tin
770156-4
794036-2
Orange
Pre-tin
770156-3
794036-1
16
[1.2]
Blue
Pre-tin
770156-5*
794036-4
Mates with
Part Numbers
1-480426-0**
350211-1
350211-2
350424-1
350424-2
641737-1
1-641737-1
770827-1
770829-1
770846-1
*Application Tooling: Arbor Tool 91085-2 uses head 231920-2.
**Pin Housing
Notes:
1. Insulation diameter .095 [2.41] max.
2. Application Tooling
Power Unit No. 91112-2 (IS 408-7763) uses Head No. 231920-2 (IS 408-9330) and Hand Tool Handle No. 58074-1
(IS 408-6790) uses Terminating Head No. 231894-1(IS 408-3186)
Note: All part numbers are RoHS Compliant.
163
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Commercial MATE-N-LOK Connectors (Continued)
PC Board Right-Angle
Pin Header with Fix Belt
4 Circuit, In-Line
.996
[25.30]
.217
[5.50]
2
1
.167
[4.23]
.200
[5.08]
Related Product Data
Used by the disk drive industry
3
Housing — Thermoplastic
Flammability Rating — UL94V-2
Contacts — Copper Alloy
4
Material
.453
[11.50]
.402
[10.20]
.016
Ref.
[.400]
.346
[8.80]
Product Specification
108-5155
.161
[4.10]
.150
[3.80]
.400
[10.16]
.600
[15.24]
.933
[23.70]
.933
[23.70]
Part No. 174552-1
Notes: Mates with socket housing Part No. 1-480424-0.
Other mating connectors include a vertical PC Board
socket header and the insulation displacement
connectors (IDC).
.209
[5.30]
.215
[5.45]
.091
[2.30]
.059
[1.50] .400
[10.15]
.200
[5.08]
.167
[4.23]
.600
[15.24]
Recommended PC Board Hole Layout
.062 [1.57] thick PC Board
Standard Density
PC Board Right-Angle
Pin Headers with Fix Belt
Reverse Polarization
4 Circuit, In-Line
.996
[25.30]
.217
[5.50]
Ref.
Material and Finish
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
Housing — Nylon
Flammability Rating — UL94V-2
Contacts — Tin plated, Copper alloy
4
.167
[4.23]
.200
[5.08]
3
2
.362 .346
.512 [9.20] [8.80]
[13.00]
A Ref.*
1
.161
[4.10]
.400
[10.16]
Related Product Data
Used by the disk drive industry
.600
[15.24]
.933
[23.70]
Product Specification
108-5155
.209
[5.30]
.933
[23.70]
Part No.
174804-1
.090
[2.30]
2 Plcs. .059
[1.50]
4 Plcs.
.400
[10.16]
.453
[11.50]
.402
[10.20]
.016
Ref.
[.400]
.200
[5.08]
.215
[5.45]
.167
[4.23]
A Dim.*
.150
3.80
Description
Long Clamp
with Kink
.600
[15.24]
Part No. 174804*
Recommended PC Board Hole Layout
.062 [1.57] thick PC Board
Notes: Mates with socket housing Part No. 1-480424-0. Other mating connectors include a vertical PC Board socket
header and the insulation displacement connectors (IDC).
Note: All part numbers are RoHS Compliant.
164
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.140 MATE-N-LOK Connectors (Large Insulation), .240 Centerline
Product Facts
Available in 2, 3 and 9
circuit configurations for
panel mounting; 4 and 9
circuit configurations for
free-hanging applications
■
Standard natural nylon
housings
■
Housings fully polarized
■
Contacts fully protected in
housings
■
Contacts accept wire
size range 20-10 AWG
[.5-5.0 mm2] with insulation
diameters from .100 [2.54]
to .180 [4.57]
■
Low insertion/extraction
forces
■
Dual locking lances provide
optimum contact stability
■
Extraction tool removes both
pins and sockets
■
Contacts are on .240 [6.09]
centerline spacing
■
Not for interrupting current
■
Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■
R
Certified by Canadian
Standards Association,
File No. LR 7189A
R
Performance Characteristics
Dielectric Withstand Voltage—
3.0 KVAC between adjacent circuits
Insulation Resistance—
1000 megohms minimum initial between
adjacent circuits
Voltage Rating—600 V AC or DC
Connector Mating—4.5 lb. max. per
circuit
Connector Unmating—.8 lb. min. per
circuit
Contact Retention—30 lb. min.
Durability—25 cycles, mating and
unmating
Thermal Shock— -55°C to +85°C
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
Wire Size—Larger diameter wire will
carry more current since it has less internal resistance to current flow and thus
generates less heat. Longer wire lengths
also enhance current-carrying capabilities since the wire conducts heat away
from the connector.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Technical Documents
Product Specification
108-1032 .140 Diameter
MATE-N-LOK Connectors
Application Specification
114-1007 .140 Diameter
MATE-N-LOK Contacts
Wire Size
AWG
mm2
20
18
16
14
12
10
.5
.8
1.2
2.0
3.0
5.0
Termination
Resistance
Test
Resistance
Current
Milliohms
(Amps)
(Max. Init.)
4.5
6
8
10
12
14
3.0
2.5
2.5
2.0
1.5
1.5
Contact
Crimp
Tensile Force
Force (Min.)
lbs.
N
20
89
30
133
45
200
50
222
60
267
65
289
.140 MATE-N-LOK Connectors (Large Insulation)
.240 [6.10] Centerline
The .140 MATE-N-LOK Connector performance characteristics found on this
page are based on free-hanging and
panel mount connectors, loaded with
contacts crimped on stranded wire.
Maximum Current—Maximum current rating of .140 MATE-N-LOK
Connectors is limited by the maximum
operating temperature of the housings
which is 105°C and the temperature rise
of the contacts which is 30°C. There are
several variables which have a direct
effect on this maximum current-carrying
capability for a given connector and
must be considered for each application.
These variables are:
Standard Density
■
Note: This is the total resistance between wire crimps of a mated pin and socket.
Current Rating Verification for 30°C Maximum Temperature Rise
100% Energized
Wire-to-Wire
.140 MATE-N-LOK Connector Calculated Current Table
Number of
Circuits
2
3
9
10
28.00
25.00
18.50
12
23.00
21.00
15.00
Wire AWG
14
16
18.50
15.00
17.00
13.50
12.00
10.00
18
13.50
12.00
9.00
20
10.50
9.50
7.00
Values are based on initial Temperature Rise versus Current Testing and are
intended to be a guide in the selection of a connector family. All applications
should be tested by the end user. The values listed are per circuit for fully
loaded housings being 100% energized. Note: All combinations were not
tested, and this chart contains interpolated and extrapolated values.
Minimum Wire Lengths for T-Rise vs. Current Testing
Note: If wire lengths used are less than those listed, the current carrying
ability of the system will be reduced due to less heat being conducted away
from the connector. The customer should fully test all applications.
165
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.140 MATE-N-LOK Connectors (Large Insulation), .240 Centerline (Continued)
Contacts
.995
[25.27]
Pin diameter .140 [3.57]
Stock thickness .014 [.357]
.795
[20.19]
Related Product Data
Product Specification
108-1032 .140 Diameter
MATE-N-LOK Connectors
Application Specification
114-1007 .140 Diameter
MATE-N-LOK Contacts
Performance Characteristics—
page 159
Keying Plug— none
Housings— pages 166-167
Technical Documents— pages 165
and 205-206
Application Tooling— pages 207-210
Pin
Wire Size
Ins. Dia.
Range
AWG [mm2] Range
Material & Finish
Socket
Contact Part Numbers
Pin
Socket
Strip Form Loose Piece Strip Form Loose Piece
Brass. pre-tin
61627-1 350389-1
20-14 .100-.180
[.5-2.0] 2.54-4.5 Phos. Brz., pre-tin 61627-2
—
61626-1
61626-2
350388-1
—
Brass. pre-tin 350201-1 350391-1
14-10 .100-.180
[2.0-5.0] 2.54-4.5 Phos. Brz., pre-tin 350201-2 350391-2
350200-1
350200-2
350390-1
350390-2
HDM
Applicator
Part No.
567306-1
567306-2
567306-3
567309-1
567309-2
567309-3
Hand Tool
Part No.
90247-1
69710-12
1HDM
Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used
on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for
further information.
2Hand Tool No. 69710-1 uses die set No. 58374-1 for 14-12 AWG and No. 58373-1 for 10 AWG.
Housings
Free-Hanging
Contact Extraction Tool
Part No. 318845-1
IS 408-4378
.240 [6.09] Centerline spacing
Standard Density
Material
Nylon, natural color
Flammability Rating — UL94V-2
4 Circuit
1.130
[28.70]
Cavity Identification
(Rear View)
1.065
[27.05]
1.180
[29.97]
.565
[14.35]
.240
[6.09]
.240
[6.09]
Cap
.140 MATE-N-LOK Connectors (Large Insulation)
.240 [6.10] Centerline
.580
[14.73]
.950
[24.13]
1.350
[34.29]
.775
[19.68]
.865
[21.97]
Socket Housing (Plug)
Part No. 1-480510-0
Pin Housing (Cap)
Part No. 1-480512-0
Part No. 794700-1 (Black Color High Temp.)
Plug
9 Circuit, Matrix
.845
[21.46]
1.130
[28.70]
Cap
.755
[19.17]
.240
[6.09]
.950
[24.13]
.755
[19.17]
.755
[19.17]
.845
[21.46]
.240
[6.09]
Pin Housing (Cap)
Part No. 1-480586-0
Plug
Socket Housing (Plug)
Part No. 1-480585-0
Note: All part numbers are RoHS Compliant.
166
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.140 MATE-N-LOK Connectors (Large Insulation), .240 Centerline (Continued)
Housings
2 and 3 Circuit, In-Line
Panel Mount
.240
[6.09]
.240 [6.09] Centerline spacing
.515
[13.08]
Material
.815
[20.70]
.965
[24.51]
.515
[13.08]
Housing — Nylon, natural color
Flammability Rating — UL94V-2
.275
[6.98]
.950
[24.13]
Cavity Identification
(Rear View)
1.130
[28.70]
.365
[9.27]
Pin Housing (Cap)
Part No. 1-350345-0
Part No. 1586305-1 (Black Color High Temp.)
Socket Housing (Plug)
Part No. 1-350344-0
Part No. 794699-1 (Black Color High Temp.)
.240
[6.09]
Plug
.755
[19.17]
Cap
1.205
[26.79]
1.055
[26.79]
.275
[6.98]
.950
[24.13]
.755
[19.17]
1.130
[28.70]
.365
[9.27]
Socket Housing (Plug)
Part No. 1-350346-0
Pin Housing (Cap)
Part No. 1-350347-0
Part No. 794061-1 (Black Color High Temp.)
9 Circuit, Matrix
Plug
Cap
.950
[24.13]
1.130
[28.70]
.910
[23.11]
.240
[6.09]
.950
[24.13]
.755
[19.17]
.240
[6.09]
.240
[6.09]
Plug
.910
[23.11]
.140 MATE-N-LOK Connectors (Large Insulation)
.240 [6.10] Centerline
Socket Housing (Plug)
Part No. 1-480672-0
Part No. 1586305-1 (Black Color High Temp.)
Pin Housing (Cap)
Part No. 1-480673-0
Part No. 794683-1 (Black Color High Temp.)
Recommended Panel Cutouts
View is from housing entry side
2 and 3 Circuit
Cap
9 Circuit
Related Product Data
Product Specification
108-1032 .140 Diameter
MATE-N-LOK Connectors
Application Specification
114-1007 .140 Diameter
MATE-N-LOK Contacts
Performance Characteristics—
page 165
Keying Plug— none
Contacts— page 166
Technical Documents— pages 165
and 205-206
C1
X
.0502
[1.27]
.475
[12.06]
1.025
[26.03]
.765
[19.43]
.190
[4.82]
Y
.288
[7.31]
X
2
.050
[1.27]
12
Circuit-.725 [18.42]
3 Circuit- .965 [24.51]
2.050 x .050 [1.27-1.27] tabs in corners of
outlet are optional to reduce housing
float in panel.
Notes:
1. Panel thickness .040-.070
[1.02-1.78].
2. "X" and "Y" dimensions must
be within .005 [.127] of each
other.
3. Panel should be punched so
that the housing enters the
panel in the same direction as
the punch for ease of assembly.
1.025
.765
[19.43] [26.03]
.190
[4.82]
Note: All part numbers are RoHS Compliant.
167
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Standard Density
.755
[19.17]
.240
[6.09]
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
168
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors
Product Facts
■
Pins and sockets can be
intermixed in the same
housing
■
Positive polarization
■
Rear cavity identification
■
Contacts completely
enclosed in housings
■
Positive locking housings
■
Insulation capability to .200
[5.08] diameter
■
Removable, crimp snap-in
contacts
Low contact mating force
■
Contacts accept 30-10 AWG
[.05-5.0 mm2] wire sizes
■
Contacts available with pretin or gold plating
■
Dual locking lances provide
optimum contact stability
■
Panel mount or free-hanging
■
Mate with Universal
MATE-N-LOK II Housings
■
Available in UL 94V-O flame
retardant material. Meets
the material requirements of
table 25.1 of U.L. Standard
1410 (television receivers
and video products)
■
Not for interrupting current
■
Harness to PC Board capability using pin or socket
headers
Pin and socket headers are
available in both vertical and
right-angle style
■
Solderability — headers meet
MIL-STD 202 Method 208
■
Contacts are on .250 [6.35]
centerline spacing
■
Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
Technical Documents
The Universal MATE-N-LOK Connector
performance characteristics found on
pages 169-170 are based on free-hanging
and panel mount connectors, loaded
with contacts crimped on stranded wire.
Dielectric Withstanding Voltage—
5.0 KVAC or 5.0 KVDC between
adjacent circuits
Insulation Resistance—
1000 megohms minimum initial between
adjacent circuits
Voltage Rating—600 V AC or DC
Contact Insertion Force—
5.0 lb. max. per contact
Contact Retention—15 lb. min.
per contact
Durability—50 cycles, mating and
unmating
Product Specifications
108-1031 Universal MATE-N-LOK
Connectors
108-1053 Universal MATE-N-LOK
PC Board Headers
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Instruction Sheet
408-7714 Plug, Cap, Headers, Pin,
Socket and Accessories
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
■
Performance Characteristics
Standard Density
■
R
■
■
Certified by Canadian
Standards Association,
File No. LR 7189
R
Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
169
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
Performance
Characteristics (Continued)
Maximum Current—Maximum current rating of Universal MATE-N-LOK
connectors is limited by the maximum
operating temperature of the housings
which is 125°C for 94V-2 housings and
120°C for 94V-0 housings including the
temperature rise of the contacts which is
a maximum of 30°C. There are several
variables which have a direct effect on
this maximum current-carrying capability for a given connector and must be
considered for each application. These
variables are:
Wire Size—Larger diameter wire will
carry more current since it has less
internal resistance to current flow and
thus generates less heat. Longer wire
lengths also enhance current carrying
capabilities since the wire conducts heat
away from the connector.
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
Wire-to-Wire
Calculated Current Table
Number of
Circuits
2
3
4
5
6 In-Line
6 Matrix
8
9
10
12
15
AWG
30
28
26
24
20
Standard Density
Printed Wiring Board Conductor
Size—The finished trace conductor
width and thickness should be maximized to allow for the greatest current
carrying capacity and heat dissipation.
Physical Shock—18 drops, 50 G
sawtooth at 10 milliseconds
Housing Panel Retention—
75 lb. min.
14
17.00
15.50
15.00
14.00
13.50
13.00
13.00
11.50
12.50
11.00
10.00
16
14.50
13.00
12.50
12.00
11.50
11.00
10.50
9.50
10.00
9.00
8.50
Wire Gauge
18
20
13.00
10.00
12.00
9.00
11.00
8.50
10.50
8.00
10.00
8.00
9.50
7.50
9.50
7.50
8.50
6.50
9.00
7.00
8.00
6.00
7.50
6.00
22
8.00
7.50
7.00
6.50
6.50
6.00
6.00
5.50
5.50
5.00
4.50
24
6.50
6.00
5.50
5.50
5.00
5.00
5.00
4.50
4.50
4.00
4.00
26
5.50
5.00
4.50
4.50
4.00
4.00
4.00
3.50
3.50
3.00
3.00
30
3.50
3.00
3.00
3.00
2.50
2.50
2.50
2.00
2.50
2.00
2.00
Minimum Wire Lengths for T-Rise vs. Current Testing
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Vibration—10-55-10 cycles per
minute at .06 inch total excursion
12
18.00
16.50
15.50
15.00
14.50
14.00
14.00
12.50
13.00
12.00
11.50
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection
of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully
loaded housings being 100% energized. Note: All combinations were not tested, and this chart contains interpolated
and extrapolated values.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Universal MATE-N-LOK connectors also
will withstand the following tests:
10
19.00
17.50
16.50
16.00
15.50
15.00
14.50
13.50
14.00
12.50
12.00
Min. Length (in.)
2.6
3.2
4.1
5.1
7.8
AWG
18
16
14
12
10
Min. Length (in.)
9.4
11.3
13.7
16.4
19.3
Note: If wire lengths used are less than those listed above, the current
carrying ability of the system will be reduced due to less heat being
conducted away from the connector. The customer should fully test
all applications.
Wire-to-Board
Due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a
separate current carrying chart for our printed circuit board header products. However, the above Wire-to-Wire charts
may be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. For vertical
headers, only 95% of the Wire-to-Wire value should be used. For right-angle headers, only 75% of the Wire-to-Wire
value should be used. The chart values are only a tool for connector selection and will require the customer to fully
test their application.
Termination Resistance/Contact Crimp Tensile Force
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
Housing Lock Strength—30 lb. min.
Thermal Shock— -55°C to +85°C
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
Corrosion—48 hr. at 5% salt
concentration
Related Product Data
Product Specifications
108-1031 Universal MATE-N-LOK
Connectors
108-1053 Universal MATE-N-LOK
Headers
Wire Size
AWG
mm2
30
28
26
24
22
20
18
16
14
12
10
.05
.08
.12
.2
.3
.5
.8
1.2
2.0
3.0
5.0
Termination
Resistance
Test
Resistance
Current
Milliohms
(Amps)
(Max. Init.)
—
—
—
1.5
3
4.5
6
8
10
—
—
—
—
—
3.50
3.50
3.00
3.00
2.75
2.75
—
—
Contact
Crimp
Tensile Force
Force (Min.)
lbs.
N
2
9
3
13
6
27
8
36
14
62
14
62
30
133
45
200
50
222
60
267
70
311
Note: This is the total resistance between wire crimps of a mated pin and socket.
170
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
Universal MATE-N-LOK Connector Mating Combinations
Connector Part
Number7
Number
Flammability Style
of
Rating
Circuits
1
UL94V-2
UL94V-0
—
—
Plug
Part
Number2
Cap
Part
Number2
1-350867-0
350865-1
770421-1
350866-1
UL94V-2 In-Line 1-480698-0
794814-13
Plating Standard
Tail
—
—
—
—
1-480699-0 Pre-tin 350428-1
794815-13 Duplex1 350428-4
2
UL94V-0 In-Line
350777-1
UL94V-2 In-Line6 1-480700-0
794901-13
Pre-tin 350786-1
350778-1
Duplex1 350786-3
1-480701-0 Pre-tin 350429-1
794900-13 Duplex1 350429-4
3
UL94V-0 In-Line
350766-1
Pre-tin 350789-1
350767-1
Duplex1
UL94V-2 In-Line 1-480702-0
794899-13
4
UL94V-0 In-Line
350779-1
UL94V-2 In-Line 1-480763-0
5
6
UL94V-0 In-Line
350809-1
UL94V-2 In-Line
640585-1
UL94V-0 In-Line
640581-1
1-480704-0
UL94V-2 Matrix6 794535-13
794096-15
Matrix
350715-1
UL94V-2 In-Line
640586-1
UL94V-0 In-Line
640582-1
8
UL94V-2
Matrix 1-480706-0
794537-13
UL94V-0
Matrix
1-480705-0 Pre-tin 350431-1
794536-13 Duplex1 350431-4
Pre-tin
Duplex1
Pre-tin
926308-1
Duplex1
Pre-tin
926308-3
Duplex1
1-480707-0 Pre-tin
794538-13 Duplex1
350781-1
9
350720-1
926302-1
UL94V-0 In-Line
926302-3
UL94V-2
Matrix 1-480708-0
794851-13
UL94V-0
Matrix
Pre-tin 350712-1
350782-1
Duplex1 350712-4
Pre-tin
—
926309-1
—
Duplex1
Pre-tin
—
926309-3
Duplex1
—
1-480709-0 Pre-tin 350433-1
794727-13 Duplex1 350433-4
12
350735-1
Pre-tin 350713-1
350783-1
Duplex1
UL94V-26 Matrix 1-480710-0
794546-13
15
UL94V-0
Matrix
350736-1
350713-4
1-480711-0 Pre-tin 350434-1
794545-13 Duplex1 350434-4
Pre-tin 350714-1
350784-1
Duplex1 350714-4
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area,
matte tin on solder tail end over .000050 [.00127] min. nickel underplate
on entire contact.
2Universal MATE-N-LOK Plug and Cap housings accept pin or socket contacts. Use the appropriate contacts in the Plug housing as required by the
mating component.
Long
Tail
Pin
Socket
—
—
350986-4
—
—
—
—
—
—
—
—
—
350831-1
1-350942-0
—
350987-4
—
3-350942-0
—
—
350832-1
1-350943-0
643228-1
350832-4
350988-4
350988-5
350833-1
350833-4
—
—
—
—
—
—
—
—
3-350943-0
1-350948-0
—
1-350944-0
3-350944-0
1-350949-0
—
1-350945-0
3-350945-0
640587-1
—
640583-1
640583-3
3-643228-0
—
—
643230-1
3-643230-0
—
—
643232-1
3-643232-0
—
—
643234-1
3-643234-0
—
—
—
—
643226-1
—
—
—
641969-1
—
350585-1
350585-4
350762-4
350762-5
643423-1
—
350989-4
350989-5
641970-1
641970-3
—
—
643410-1
643410-3
641971-1
641971-3
641972-1
1-641972-14
641972-3
—
—
—
—
641973-1
—
641974-1
1-641974-14
641974-3
641975-1
—
641976-1
641976-4
350732-1
350732-4
770143-1
—
—
—
350586-1
350586-4
350827-1
350827-4
—
—
—
—
350763-4
350763-5
643424-1
643424-3
—
—
—
—
643425-1
—
350834-1
350834-4
—
—
—
—
350990-4
350990-5
350742-1
350828-1
643426-1
350835-1
—
—
350742-4
—
—
—
—
350587-1
350587-4
350828-4
—
—
—
—
350764-4
350764-5
643426-3
—
—
—
—
—
—
350835-4
—
—
—
—
350991-4
350991-5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
350737-1
350829-1
643428-1
350836-1
—
—
350737-4
350588-1
350588-4
350738-1
350738-4
350829-4
350765-4
350765-5
350830-1
350830-4
—
643429-1
—
643430-1
—
350836-4
350992-4
—
350837-1
350837-4
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
640584-1 643236-1
640584-3 3-643236-0
—
—
—
—
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
UL94V-2 In-Line
10
350711-1
350711-4
641825-1
—
641828-1
—
350432-1
350432-4
Right-Angle2
Standard Density
UL94V-0
350789-3
1-480703-0 Pre-tin 350430-1
794707-13 Duplex1 350430-4
Pre-tin 350792-1
350780-1
Duplex1 350792-3
1-480764-03 Pre-tin 640466-1
794863-13 Duplex1 640466-3
Pre-tin 640900-1
350810-1
Duplex1 640900-3
Pre-tin 641832-1
926307-1
Duplex1 641832-3
Pre-tin 641831-1
926307-3
Duplex1 641831-3
Mating Connector Part Number
PC Board Headers7
Vertical Pin2
Vertical Socket2
Standard
Standard
Long
Standard
Tail
Tail
Tail
Tail
Polarized
Polarized
—
—
—
—
—
—
—
—
641963-1 350582-1 350759-4 643411-1
641963-3 350582-4 350759-5
—
641964-1
350787-1 350824-1 643412-1
1-641964-15
641964-3 350787-3 350824-4 643412-3
641965-1 350583-1 350760-4 643413-1
—
350583-4 350760-5
—
641966-1
350790-1 350825-1 643414-1
1-641966-14
—
350790-3 350825-4 643414-3
641967-1 350584-1 350761-4 643415-1
—
350584-4 350761-5
—
641968-1 350793-1 350826-1 643416-1
—
350793-3 350826-4
—
643405-1
—
640467-1
—
—
—
640467-3
—
643406-1
—
640901-1
—
—
—
640901-3
—
643407-1
—
—
—
—
—
—
—
643408-1
—
770262-1
—
—
—
770262-3
—
3Housing material has 125°C temperature rating.
4Black in color.
5Tool Removable
6UV Resistant housing material available.
7European glow wire housing material available.
Note: All part numbers are RoHS Compliant.
171
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
Contacts
Related Product Data
Solid pin diameter .084 [2.13]
Stock thickness .012 [.305] unless
otherwise noted.
These contacts can be used in either
Universal MATE-N-LOK Plug or Cap
housings only.
Product Specification
108-1031 Universal MATE-N-LOK
Connectors
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Performance Characteristics—
pages 169-170
Technical Documents— pages 169 and
205-206
Application Tooling— pages 207-210
Housings—page 174
Wire Size
Range
AWG [mm2]
Ins. Dia.
Range
30-26
[.05-.12]
.032-.057
.813-1.45
Standard Density
24-18
[.2-.8]
.040-.100
1.02-2.54
Solid Pin
Contact Part Numbers
L Dim.
Pin Socket
Material & Finish
.790 .760
20.06 19.30
Pin
Brass, Pre-tin
Phos. Brz., Gold2
Strip Form
350924-1
350924-6
Loose Piece
770672-1
770672-6
Brass, Pre-tin
350561-1
350690-1
Brass, Gold2
350561-2
350690-2
Brass, Select Gold3
350561-7
350690-7
Phos. Brz., Pre-tin
Phos. Brz., Select Gold3
Brass, Pre-tin
Brass, Gold2
Brass, Select Gold3
Phos. Brz., Pre-tin
Phos. Brz., Select Gold3
Brass, Pre-tin
Brass, Gold2
Brass, Select Gold3
Phos. Brz., Pre-tin
Phos. Brz., Select Gold3
350561-3
—
350218-1
350218-2
350218-7
350218-3
350218-6
350538-1
350538-2
350538-7
350538-3
350538-6
350690-3
—
350547-1
350547-2
350547-7
350547-3
350547-6
350552-1
350552-2
350552-7
350552-3
350552-6
Socket
Strip Form
Loose Piece
350925-1
770673-1
350925-6
—
350851-1
350689-11
350570-11
350851-2
640347-2
350689-21
350570-21
350851-7
350689-71
350570-71
1
350570-3
350689-31
350570-61
—
350536-1
350550-1
350536-2
350550-2
350536-7
350550-7
350536-3
350550-3
350536-6
350550-6
350537-1
350551-1
350537-2
350551-2
350537-7
350551-7
350537-3
350551-3
350537-6
350551-6
Brass, Pre-tin
Phos. Brz., Pre-tin
350873-1
350873-3
—
350918-3
350874-1
350874-3
—
350919-3
Phos. Brz., Pre-tin
350922-3
640309-3
350923-3
640310-3
Phos. Brz., Select Gold3 350922-6
640309-6
350923-6
640310-6
.790 .760
20.06 19.30
20-14
[.5-2.0]
.060-.130
1.52-3.30
.790 .760
20.06 19.30
20-14
[.5-2.0]
or
2@18
[.8]
.130-.200
3.30-5.08
.810 .780
20.57 19.81
18-144
[.8-2.0]
.130-.200
3.30-5.08
.810 .780
20.57 19.81
12-10
[3.0-5.0]
.200 max.5
5.08
.810 .780
20.57 19.81
Socket
HDM
Applicator
Part No.
Hand Tool
Part No.
466616-26
466616-36
58439-1
466320-16
466320-26
466320-46
91510-1
687763-16
687763-26
687763-66
91500-1
687926-16
687926-26
687926-66
91508-17
91506-17
466588-16
466588-26
466588-36
466597-16
466597-26
466597-36
91508-17
91506-17
69710-17
Contact — .010 [.254] stock thickness
Finish — Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact.
Gold Finish — Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact.
4Recommended for predominant use of 14 AWG wire.
5There is no insulation barrel on this contact. Insulation maximum diameter is limited by the housing.
6HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K
Machine, -3, -4 & -6 are used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information.
7Hand Tool No. 91508-1 is for wire size 20-18 AWG. Hand Tool No. 91506-1 is for wire size 16-14 AWG. Hand Tool No. 69710-1 use die set No. 58380-1 for 12
AWG and No. 58380-2 for 10 AWG.
Note: Phosphor bronze material contacts should be used in high temperature/humidity cycling applications.
Note: All part numbers are RoHS Compliant.
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
1Socket
2Gold
3Select
Contact Retention Test Tool
Part No. 1586701-1
IS 408-10003
Contact Extraction Tool
Part No. 318851-1
IS 408-4371
Contact Insertion Tool
(For inserting contacts applied
to small diameter wire)
Part No. 91002-1
IS 408-7347
172
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
Contacts
Split Pins
Split pin diameter .086 [2.18]
Stock thickness .012 [.305]
These contacts can be used in either
Universal MATE-N-LOK Plug or Cap
housings only.
Related Product Data
Wire Size Range
AWG [mm2]
Ins. Dia.
Range
L
Dim.
24-18
[.2-.8]
.040-.100
1.02-2.54
.790
20.06
20-14
[.5-2.0]
.060-.130
1.52-3.30
.790
20.06
20-14
[.5-2.0]
or
2@18 [.8]
.130-.200
3.30-5.08
.810
20.57
Product Specification
108-1031 Universal MATE-N-LOK
Connectors
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Performance Characteristics—
pages 169-170
Technical Documents— pages 169
and 205-206
Application Tooling— pages 207-210
Housings—page 174
Material & Finish
Brass, Pre-tin
Brass, Gold1
Brass, Select Gold2
Brass, Pre-tin
Brass, Gold1
Brass, Select Gold2
Brass, Pre-tin
Brass, Gold1
Brass, Select Gold2
Contact Part Number
Strip Form
Loose Piece
350699-1
350699-2
350699-7
350687-1
350687-2
350687-7
350700-1
350700-2
350700-7
350706-1
350706-2
350706-7
350705-1
350705-2
350705-7
350707-1
350707-2
350707-7
HDM
Applicator
Part No.
Hand Tool
Part No.
466320-13
466320-23
466320-43
91510-1
687763-13
687763-23
687763-63
91500-1
687926-13
687926-23 91508-14
687926-63 91506-14
1Gold
Finish — Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127]
min. nickel underplate on entire contact.
2Select Gold Finish — Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel
underplate on entire contact.
3HDM Applicator part number ending in -1, is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is
used on AMP-O-LECTRIC Model K Machine, -4 & -6 are used on AMP-O-LECTRIC Model G Machine. See
pages 207-210 for further information.
4Hand Tool No. 91508-1 for wire size 20-18 AWG. Hand Tool No. 91506-1 for wire size 16-14 AWG.
Notes:
1. Split pins recommended for use in housings having 6, 9, 12 and 15 circuits to reduce mating force.
2. Phosphor bronze material contacts are available for use in high temperature/humidity cycling applications,
consult Tyco Electronics.
Grounding Pins
(.100 [2.54] longer than standard pin)
Ins. Dia.
Range
L
Dim.
Material & Finish
24-18
[.2-.8]
.060-.130
1.52-3.30
.890
22.60
Brass, Pre-tin
20-14
[.5-2.0]
.060-.130
1.52-3.30
.890
22.60
Brass, Pre-tin
12-10
[3.0-5.0]
.200 max.1
5.08
.910
23.11
Phos. Brz., Pre-tin
HDM
Contact Part Number
Tool
Applicator Hand No.
Part
Strip Form
Loose Piece Part No.
567216-22
—
770210-1
—
567216-32
2
687763-1
350654-1
350669-1 687763-22 91500-1
687763-62
466597-12
770234-3
—
466597-22
—
466597-32
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
Wire Size Range
AWG [mm2]
Standard Density
(Mate first, break last, not for interrupting
current)
1There
is no insulation barrel on this contact. Insulation maximum diameter is limited by the housing.
Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is
used on AMP-O-LECTRIC Model K Machine, -3 & -6 are used on AMP-O-LECTRIC Model G Machine. See pages
207-210 for further information.
2HDM
Programmable Connector
Contact
(Socket with 110 Series Special
FASTON Tab)
Material and Finish
Brass, pre-tin
.048
[1.22] Dia.
.805
[20.45]
Part Number
350877-1
Note: This contact will accept a 110
Series FASTON Receptacle — Part
No. 350871-1 (strip form) allowing
simple field wiring or wiring changes.
Note: All part numbers are RoHS Compliant.
173
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
Housings
Free-Hanging or Panel Mount
2, 3, 4, 5, 6, 8 and 10
Circuit, In-Line
.250 [6.35] Centerline spacing
.300
[7.62]
.300
[7.62]
1.080
[27.43]
1.080
[27.43]
.580
[14.73]
Plug
.620
[15.75]
Cap
6 Circuit, Matrix
1 Circuit, Free-Hanging
.290
[7.37]
.290
[7.37]
.460
[11.68]
.550
[13.97]
.550
[13.97]
.460
[11.68]
1.080
[27.43]
Plug
1.080
[27.43]
1.080
[27.43]
Plug
.460
[11.68]
1.080
[27.43]
Cap
.800
[20.32]
1.120
[28.45]
.380
[9.65]
9, 12 and 15 Circuit,
Matrix
1.080
[27.43]
.380
[9.65]
Cap
.460
[11.68]
.800
[20.32]
1.080
[27.43]
Standard Density
Related Product Data
Product Specification
108-1031 Universal MATE-N-LOK
Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
Performance Characteristics—
pages 169-170
Contacts—pages 172-173
Panel Cutout
Recommendations— page 175
Keying Plug— page 175
Strain Reliefs— pages 175-176
Technical Documents— pages 169
and 205-206
Mating Headers—pages 182-183
and 185
Other Mating Connectors
Universal MATE-N-LOK II Housings—
pages 193-194
Note: See charts on page 182 to
order Plug and Cap Housings in
colors.
Number of
Circuits
A
Dim.
1
—
.550
13.97
.800
20.32
1.050
26.67
1.300
33.02
1.550
39.37
2
3
4
5
6
—
8
9
10
12
15
2.050
52.07
.800
20.32
2.550
64.77
1.050
26.67
1.300
33.02
1.080
[27.43]
.800
[20.32]
1.080
[27.43]
Plug
Cap
1.120
[28.45]
Housing Part Numbers
UL94V-2 Nylon, Natural Color2
UL94V-0 Nylon3
Plug
Cap
Plug
Cap
1-350867-0
770421-1
350865-1
350866-1
1-480698-01
1-480699-01
350777-11
350778-11
1-480700-01
1-480701-01
350766-11
350767-11
1-480702-01
1-480703-01
350779-11
350780-11
1-480763-01
1-480764-01
350809-11
350810-11
640585-11
926307-11
640581-11
926307-31
350715-1
350781-1
640582-11
926308-31
350720-1
350782-1
926302-31
926309-31
1-480704-0
794096-14
640586-11
1-480706-0
926302-11
1-480705-0
926308-11
1-480707-0
926309-11
1-480708-0
1-480709-0
350735-1
350783-1
1-480710-0
1-480711-0
350736-1
350784-1
1In-Line
style.
material has 125°C temperature rating.
3Housing material has 120°C temperature rating.
4Tool Removable.
2Housing
Note: All part numbers are RoHS Compliant.
174
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
Recommended
Cap Housing
Panel Cutouts
Style
Number of
Circuits
A
.565
14.35
.815
20.70
1.065
27.05
1.315
33.40
1.567
39.80
2.067
52.50
2.567
65.20
.565
14.35
.815
20.70
1.065
27.05
1.315
33.40
2
View is from cap entry side
3
Refer to Application Specification
114-1010
4
5
In-Line
6
8
10
6
9
Matrix
12
15
B
.340
8.64
.340
8.64
.340
8.64
.340
8.64
.154
3.91
.154
3.91
.154
3.91
.480
12.19
.480
12.19
.480
12.19
.480
12.19
Dimensions
C
.095
2.41
.095
2.41
.095
2.41
.095
2.41
.189
4.80
.189
4.80
.189
4.80
.275
6.99
.275
6.99
.275
6.99
.275
6.99
D
.530
13.46
.530
13.46
.530
13.46
.530
13.46
.531
13.49
.531
13.49
.530
13.46
1.030
26.16
1.030
26.16
1.030
26.16
1.030
26.16
E
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.394
10.0
.394
10.0
.394
10.0
.250
6.35
.250
6.35
.350
8.89
.350
8.89
Notes:
1. Recommended panel thickness — .030-.090 [.762-2.286]. Panel must be punched so that housing enters panel in
same direction as the punch.
2. Optional — Do not remove this material when keying cap housing to panel.
3. Circuit #1 location when using panel keying with 6, 9, 12 and 15 circuit Matrix housings.
4. Circuit #1 location when using panel keying with 2, 3, 4, 5, 6, 8 and 10 circuit In-Line housings.
5. .175 [4.45] dimension is .125 [3.18] for 6, 8 and 10 circuit In-Line housings.
Keying Plugs
IS 408-3320
Standard Density
Part Numbers
UL94V-2 Nylon material, natural color — 1-640415-1
UL94V-0 Nylon material — 1-640415-0
Note: Keying plug snaps into plug or cap housing
6, 9, 12 and 15 Circuit, Matrix
2, 3, 4, 5, 6 and 8 Circuit, In-Line
Plug Housing
Strain Reliefs
2 Req’d/Assy.
See Note
IS 408-3320
Wire Bundle Dia.—
.500 Max.
[12.7]
Wire Bundle Dia.—
.312
Max.
[7.92]
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
2 Req’d/Assy.
See Note
.600
[15.24]
.600
[15.24]
Related Product Data
Plug Housings— page 174
Technical Documents— pages 169
and 205-206
1.375
[34.93]
1.375
[34.93]
(2) #6x5 ⁄ 8 Lg Type B
Pan head sheet
metal screws
(not supplied)
(2) #6x5 ⁄ 8 Lg Type B
Pan head sheet
metal screws
(not supplied)
.530
[13.46]
Part Numbers
UL94V-2 Nylon material, natural color — 1-350589-0
UL94V-0 Nylon material — 350811-1
.530
[13.46]
Part Numbers
UL94V-2 Nylon material, natural color — 1-350590-0
UL94V-0 Nylon material — 350812-1
Note: Strain relief part number represents one half of a strain relief. Two strain reliefs required per housing.
Note: All part numbers are RoHS Compliant.
175
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
Plug or
Cap Housing
Strain Reliefs
Cap Connector
2, 3, 4, 5, 6, 8, 9,
12 and 15 Circuit
(Enclosed)
IS 408-3320
Related Product Data
Adapter
Note 4
Housings— page 174
Technical Documents— pages 169
and 205-206
Enclosed Strain
Relief
2 Req’d/Assy.
Note 3
(2) #6x5/8 Lg Type B
Pan head sheet metal
screws (not supplied)
2 Req’d/Assy.
Note 3
1.300
[33.02]
Cap Housing Adapters
Note 2
These adapters are designed to anchor
the cap housing strain reliefs to the
housings and prevent the strain relief
halves from “drawing in” when the
screws are being torqued down to clamp
the cable.
2 Req’d/Assy.
Note 3
1.300
[33.02]
Note
2
Note 1
(2) #6x3/8 Lg Type B
Pan head sheet metal
screws (not supplied)
In-Line
Matrix
Insert
IS 408-3320
For All Positions Except 2, 6
and 8 Circuit Cap Housings
Style
Standard Density
.630
[16.0]
Number of
Circuits
A
Dim.
2
.960
24.38
3
.550
[13.97]
4
In-Line
1.140
28.96
1.325
33.65
UL94V-2 Nylon material,
natural color — 641777-1
5
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
UL94V-0 Nylon material —
641778-1
For 2 In-Line and 6 Matrix
Circuit Cap Housings Only
6
Note 5
.630
[16.0]
8
Note 5
6
.480
[12.19]
9
Matrix
12
15
UL94V-2 Nylon material,
natural color — 643182-1
UL94V-0 Nylon material —
643182-2
1.530
38.86
1.780
45.21
2.280
56.08
1.030
26.16
1.030
26.16
1.280
32.51
1.530
38.86
Insert
Supplied
Single Wire
Dia. Range
Wire Bundle
Dia. Range
Part Numbers
UL94V-2 Nylon,
UL94V-0 Nylon
Natural Color
.040-.190
1.02-4.83
—
1-640719-0
640713-1
No
—
.200-.350
5.08-8.89
1-640719-1
640713-2
Yes
.040-.190
1.02-4.83
—
1-640720-0
640714-1
No
—
.200-.350
5.08-8.89
641763-1
641945-1
Yes
.040-.190
1.02-4.83
—
641775-1
641776-1
No
—
.200-.350
5.08-8.89
641775-2
641776-2
Yes
.040-.190
1.02-4.83
—
643030-3
643030-1
No
—
.200-.350
5.08-8.89
643030-2
643030-4
Yes
.040-.190
1.02-4.83
—
643585-1
643313-1
No
—
.200-.350
5.08-8.89
643585-2
643313-2
Yes
.040-.190
1.02-4.83
—
—
643314-1
No
—
—
643314-2
Yes
—
1-640721-0
640715-1
Yes
—
1-640722-0
640716-1
Yes
—
1-640723-0
640717-1
Yes
—
.200-.350
5.08-8.89
.120-.650
3.05-16.51
.120-.650
3.05-16.51
.150-.750
3.81-19.05
.200-.850
5.08-21.59
1-640724-0
640718-1
Yes
Notes:
1. Cable clamping insert comes attached to strain relief. It can be used to provide additional adjustment for small wire
bundles or discarded.
2. Insert to be positioned as shown by dotted lines.
3. Strain relief part number represents one-half of a strain relief. Two strain reliefs required per housing.
4. Must use cap housing adapters when attaching strain reliefs to a cap housing. Two adapters required per housing.
5. Strain reliefs for 6 and 8 circuit In-Line fits plug housings only.
Note: All part numbers are RoHS Compliant.
176
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Flanged Cap Housings with Twist and Lock Feature
Product Facts
Available in a 6, 9, and 12
circuit design
■ Designed for household
appliances where a
bulkhead connector system
is needed in conjunction
with foam-in insulation
■ Mates with standard
Universal MATE-N-LOK plug
housings (page 174)
■ Accepts Universal
MATE-N-LOK pin and socket
contacts (page 167)
■ Designed to utilize the
Splash Proof/Sealed
Universal MATE-N-LOK
seals for additional sealing
protection (pages 174-175)
■
.115
[2.92]
1.365 Dia.
[34.67]
.010
[0.25]
Material and Finish
Housing—Nylon, UL 94V-0 or
UL 94V-2 rated
Contacts—Phosphor Bronze or Brass
Plating—Pre-tin or Gold
.185
[4.69]
1.145 Dia.
[29.08]
Standard Density
.290
[7.36]
Related Product Data
Recommended Panel Cutout
(for 6 and 9 Pos. Housings)
Contacts—pages 172-173
Plug Housings—page 174
Seals—page 180
.800
[20.32]
2.000
Dia.
[50.80]
.675
[17.15] Radius
2 Plc.
Universal MATE-N-LOK Flanged Cap Housings
.250 [6.35] Centerline
.550
[13.97]
.510
[12.95]
Notes:
1. Recommended Panel Thickness:
0.76-2.29 [.030-.090]
2. Panel must be punched so that
the housing enters the panel in
the same direction as the punch.
3. Asymmetrical panel cutout provides polarization for Pin 1 location.
Number of
Circuits
1.080
[27.43]
Cap Housing Part Numbers
UL 94V-0
UL 94V-2
6
794760-1
794714-1
9
794761-1
794715-1
12
794762-1
794716-1
Note: All part numbers are RoHS Compliant.
177
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Sealed
Connectors
Bulkhead
(Continued)
Connectors
Product Facts
■
■
■
■
■
■
■
■
■
Standard Density
■
■
Bulkhead mount Universal
MATE-N-LOK connector
that facilitates sealed
panel mounting and works
with existing Universal
MATE-N-LOK seals to
provide a fully-sealed
interconnection system
Available in 4, 6, 9 and 12
positions
Sealed, flange mount
design
Mates to standard Universal
MATE-N-LOK plug housings
Accepts standard Universal
MATE-N-LOK contacts
Works with standard
Universal MATE-N-LOK
connector interface and
wire seals
Anti-rotation feature aids
installation
Rear mount flange design
enables use in wire
harnesses
Pins and sockets can be
intermixed in the same
housing
UL Recognized,
File No. E28476
CSA Certified,
File No. 1030930
Applications
Vending Machines
Industrial Machinery
■ Lighting
■ HVAC Equipment
■
Universal MATE-N-LOK Sealed Bulkhead Connectors
.250 [6.35] Centerline
■
R
Performance Characteristics
Technical Documents
Dielectric Withstanding Voltage—
5.0 KVAC or 5.0 KVDC between
adjacent circuits
Insulation Resistance—
1000 megohms minimum initial
between adjacent circuits
Voltage Rating—600 V AC or DC
Durability—50 cycles, mating
and unmating
Product Specification
108-1031 Universal MATE-N-LOK
Connectors
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Instruction Sheet
408-10017 Universal MATE-N-LOK
Bulkhead Connectors
178
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Sealed
Connectors
Bulkhead
(Continued)
Connectors (Continued)
Connector Housings
4 Position Connector Housing
(shown)
Material and Finish
Housing—Nylon, UL 94V-0 rated
Contacts—Brass with pre-tin or gold
plating
O-ring Seal—Neoprene
Locking Nut—Steel, zinc plated
1.050
[26.67]
1.160
[29.46]
.750
[19.05]
.980
[24.89]
.300
[7.62]
1.500
[38.10]
1.680
[42.67]
1.480
[37.59]
Ø1.320
[33.53]
No. of Pos.
4
6
9
12
Ø1.660
[42.16]
Recommended
Panel Cut-Out for 12 Position Product Only
Style
In Line
Matrix
Matrix
Matrix
Housing Part Number
1604256-1
1604210-1
1604254-1
1604941-1
Note: All part numbers are RoHS Compliant.
179
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Universal MATE-N-LOK Sealed Bulkhead Connectors
.250 [6.35] Centerline
Recommended
Panel Cut-Out for 4, 6 & 9 Position Product Only
Standard Density
1.000
[25.40]
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Sealed
Connectors
Connectors
(Continued)
Splash Proof Seals
Material
Silicone rubber, blue color
Technical Documents
Product Facts
Economical splash proof/
immersible sealed connector system
■
No design changes to existing Universal MATE-N-LOK
product
■
Existing applications utilizing Universal MATE-N-LOK
connectors can be upgraded
to a splash proof system
■
Wire range is 20-14 AWG
[.5-2.0] with insulation
diameter range .060-.130
[1.52-3.30]
■
.110-.130 [2.79-3.30]
insulation diameter passed
European IP sealing level
5/6 + 7 (swirling dust/
immersion to 1 meter for
30 minutes)
Standard Density
Universal MATE-N-LOK II
keying plug can be used to
seal unused circuits
■
Primary application is for
wire-to-wire; wire-to-board
application must use a
closed bottom header
.300
[7.62]
Wire
Cap Housing
Wire Seal
Interface
Seal
Pin Contact
Silos
Back Side
(Wire End)
Number of
Circuits
2
3
4
6
9
12
15
Sealing Plug
Part Number 770377-1
A
Dim
.550
.800
1.050
—
.800
1.050
1.300
Interface Seal
Part Number
794269-1
794271-1
794273-1
794275-1
794277-1
794279-1
794281-1
Interface Seal
Low Mating Force*
794991-1
794992-1
—
794993-1
794994-1
—
—
Wire Seal
Part Number
794270-1
794272-1
794274-1
794276-1
794278-1
794280-1
794282-1
Note: One interface seal and two wire seals required per mated assembly.
*Low mating force interface seals do not meet IP 5/6 IP 5/7 requirements.
Note: All part numbers are RoHS Compliant.
6 Circuit, Matrix
.300
[7.62]
9, 12, and 15 Circuit, Matrix
.550
[13.97]
.400
[10.16]
.030
[.762]
interface
Wire
.800
[20.32]
.800
[20.32]
.800
[20.32]
A
.400
[10.16]
Wire Seal
Contact
Cavity
2, 3, 4 Circuit, In-Line
A
Mating
End
Plug Housing
.060-.110 [1.52-2.79]
insulation diameter passed
European IP sealing level
5/5 + 7 (swirling dust/
heavy seas)
■
Note: For proper use of this product, customer should make sure
that Instruction Sheet 408-3392 is available for review.
Instruction Sheet
408-3392 Universal MATE-N-LOK
Splash Proof Seals
Utilizes two wire seals and
one interface seal
■
■
Universal MATE-N-LOK Sealed Connectors
.250 [6.35] Centerline
Product Specification
108-1031-1 Splash Proof Seal,
Universal MATE-N-LOK
Connectors
Contacts—page 175
Housings—page 174
■
A
.550
[13.97]
.800
[20.32]
.030
[.762]
interface
Wire
A
.030
[.762]
.400
[10.16]
interface
180
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Sealed
Connectors
Connectors
(Continued)
(Continued)
Contacts (used with
Splash Proof Seals)
Solid pin diameter .084 [2.13]
Split pin diameter .086 [2.18]
Stock thickness .012 [.305] unless
otherwise noted.
These contacts can be used in either
Universal MATE-N-LOK Plug or Cap
housings only.
Solid Pin
Split Pin
Socket
Related Product Data
Product Specification
108-1031 Universal MATE-N-LOK
Connectors
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Grounding Pin
Performance Characteristics—
pages 169-170
Technical Documents— pages 169
and 205-206
Application Tooling— pages 207-210
Housings—page 174
Wire Size
Ins. Dia.
Range
AWG [mm2] Range
20-14
[.5-2.0]
.060-.130
1.52-3.30
(.100 [2.54] longer than standard pin)
(Mate first, break last, not for interrupting
current)
L Dim.
Pin
Socket
.790
20.06
Brass, Pre-tin
Brass, Gold1
Brass, Select Gold2
Phos. Brz., Pre-tin
.760
19.30 Phos. Brz., Select Gold2
Brass, Pre-tin
Brass, Gold1
Brass, Select Gold2
—
Brass, Pre-Tin
Style
Solid
Split
Grounding
Contact Part Numbers
Pin
Socket
Strip Form Loose Piece Strip Form Loose Piece
350218-1 350547-1
350536-1 350550-1
350218-2 350547-2
350536-2 350550-2
350218-7 350547-7
350536-7 350550-7
350218-3 350547-3
350536-3 350550-3
350218-6 350547-6
350536-6 350550-6
350687-1 350705-1
—
—
350687-2 350705-2
—
—
350687-7 350705-7
—
—
350654-1
HDM
Applicator Hand Tool
Part No.
Part No.
687763-13
687763-23
687763-63
91500-1
Standard Density
.890
22.60
Material & Finish
350669-1
1Gold
Finish — Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact.
Gold Finish — Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact.
3HDM Applicator part number ending in -1, is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K
Machine, -4 & -6 are used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information.
Notes:
1. Split pins recommended for use in housings having 6, 9, 12 and 15 circuits to reduce mating force.
2. Phosphor bronze material contacts are available for use in high temperature/humidity cycling applications,
consult Tyco Electronics.
3. 18-24 AWG contacts (page 166) can be used with splash proof seals if insulation diameter range is .060-.100 [1.52-2.54].
2Select
.940
[23.88]
.130
[3.30]
IS 408-3392
Universal MATE-N-LOK Sealed Connectors
.250 [6.35] Centerline
Universal MATE-N-LOK II
Keying Plug/Splash Proof
Sealing Plug
Part Number
UL94V-0 Nylon material — 770377-1
Related Product Data
Housings— page 174
Technical Documents— pages 169
and 205-206
Seal Latch Tool
Part No. 794381-1
IS 408-3392
Contact Extraction Tool
Part No. 318851-1
IS 408-4371
Contact Insertion Tool (For inserting
contacts applied to small diameter wire)
Part No. 91002-1
IS 408-7347
Note: All part numbers are RoHS Compliant.
181
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
PC Board Vertical
Pin Headers
2, 3, 4, 5, 6 and 8
Circuit, In-Line
Polarizing
feature
.250 [6.35] Centerline spacing
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
Material
Housing —
UL94V-2 Nylon, natural color
UL94V-0 Nylon
Contacts — Phosphor bronze
Number of
Circuits
A
Dim.
Flammability Pin
Rating
Finish
Solder tail diameter .062 [1.57]
2
Related Product Data
Performance Characteristics—
pages 169-170
Recommended PC Board Hole
Layout— page 184
Technical Documents— pages 169
and 205-206
3
350786-1
Duplex1
Pre-tin
UL94V-2
Duplex1
350786-3
350429-1
350429-4
Pre-tin
350789-1
Duplex1
350789-3
350430-1
770351-15
350430-4
350792-1
350792-3
640466-1
640466-3
640900-1
640900-3
641832-1
641831-1
641825-1
641828-1
—
.800
20.32
UL94V-2
1.050
26.67
UL94V-0
Mating Connectors
Universal MATE-N-LOK
Plug Housings — page 174
UL94V-2
5
Universal MATE-N-LOK II
Plug Housings — pages 193-194
Standard Density
Pre-tin
UL94V-0
4
6, 9, 12 and 15
Circuit, Matrix
1.300
33.02
UL94V-0
6
1.550
39.37
8
2.050
52.07
Number of
Circuits
A
Dim.
UL94V-2
UL94V-0
UL94V-2
UL94V-0
UL94V-0
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
350431-1
350431-4
Pre-tin
350711-1
Duplex1
Pre-tin
UL94V-2
Duplex1
350711-4
350432-1
350432-4
UL94V-0
.550
[13.97]
9
.800
[20.32]
12
.800
20.32
Pre-tin
350712-1
Duplex1
Pre-tin
UL94V-2
Duplex1
350712-4
350433-1
350433-4
Pre-tin
350713-1
Duplex1
Pre-tin
UL94V-2
Duplex1
Pre-tin
UL94V-0
Duplex1
350713-4
350434-1
350434-4
350714-1
350714-4
UL94V-0
1.050
26.67
UL94V-0
15
Note: Header Housings on pages
182-185 are available in colors
listed on page 188. Call Technical
Support for exact Part Numbers.
1.300
33.02
Standard
Tail2
Pre-tin
.550
13.97
Standard Tail
Polarized2
641963-1
641963-3
641964-1
1-641964-14
641964-3
641965-1
—
641966-1
1-641966-14
—
641967-1
—
—
641968-1
—
643405-1
—
643406-1
—
643407-1
643408-1
—
643410-1
643410-3
Long Tail3
350582-1
350582-4
Standard Tail
Polarized2
641969-1
—
—
641970-1
1-641970-14
641970-3
641971-1
641971-3
641972-1
1-641972-14
641972-3
641973-1
—
641974-1
1-641974-14
641974-3
641975-1
—
641976-1
641976-4
Mates with Plug
Housing Part Number
(Using Socket Contacts)
Universal
Universal
MATE-N-LOK MATE-N-LOK II
1-480698-0
350787-1
350777-1
350787-3
350583-1
350583-4
1-480700-0
350790-1
350766-1
350790-3
350584-1
—
350584-4
350793-1
350793-3
—
—
—
—
—
—
770143-1
770272-1
770272-3
1-480702-0
350779-1
1-480763-0
Pin Header Part Numbers
Duplex1
UL94V-2
6
Pre-tin
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Pre-tin
Pre-tin
Pre-tin
Duplex1
Flammability Pin
Rating
Finish
Polarizing
feature
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
Pre-tin
UL94V-2
Duplex1
UL94V-0
.300
[7.62]
Pin Header Part Numbers
Standard
Tail2
350428-1
350428-4
.550
13.97
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
.550
[13.97]
Long Tail3
350732-4
350586-1
350586-4
350742-1
350742-4
350587-1
350587-4
350737-1
350737-4
350588-1
350588-4
350738-1
350738-4
770017-1
—
770018-1
—
770019-1
—
350809-1
770016-1
640585-1
640581-1
640586-1
640582-1
—
—
—
—
—
—
Mates with Plug
Housing Part Number
(Using Socket Contacts)
Universal
Universal
MATE-N-LOK MATE-N-LOK II
350585-1
643749-15 1-480704-0
350585-4
350732-1
—
350715-1
1-480706-0
350720-1
1-480708-0
350735-1
1-480710-0
350736-1
—
770020-1
—
770021-1
—
770022-1
—
770023-1
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
2Use Standard Tail for .062 [1.57] thick PC Board. 3Use Long Tail for .125 [3.18] thick PC Board.
4Black in color. 5No drain holes, used w/ seals, page 180.
Note: All part numbers are RoHS Compliant.
182
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
PC Board Vertical
Socket Headers
2, 3, 4, 5, and 6
Circuit, In-Line
Polarizing
feature
.250 [6.35] Centerline spacing
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
Material
Housing —
UL94V-2 Nylon, natural color
UL94V-0 Nylon
Contacts — Phosphor bronze
Number of
Circuits
Solder tail diameter .062 [1.57]
A
Dim.
Flammability
Rating
UL94V-2
Related Product Data
2
UL94V-0
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 169-170
Recommended PC Board Hole
Layout— page 184
Technical Documents— pages 169
and 205-206
.550
13.97
UL94V-2
3
.800
20.32
UL94V-0
UL94V-2
4
1.050
26.67
UL94V-0
UL94V-2
Mating Connectors
5
Universal MATE-N-LOK
Plug Housings — page 174
Universal MATE-N-LOK II
Plug Housings — pages 193-194
6
1.300
33.02
1.550
39. 37
6, 9, 12 and 15
Circuit, Matrix
UL94V-0
UL94V-0
Socket
Finish
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Pre-tin
Pre-tin
Duplex1
Standard Tail
Polarized2
643411-1
—
643412-1
643412-3
643413-1
—
643414-1
643414-3
643415-1
—
643416-1
—
—
—
—
—
350986-4
—
350831-1
—
350987-4
—
350832-1
350832-4
350988-4
350988-5
350833-1
350833-4
—
—
—
—
Duplex1
770262-3
—
—
Flammability
Rating
.800
20.32
UL94V-0
UL94V-2
1.050
26.67
UL94V-0
UL94V-2
15
1-480698-0
350777-1
1-480700-0
350766-1
1-480702-0
350779-1
1-480763-0
—
770017-1
—
770018-1
—
770019-1
—
350809-1
770016-1
640581-1
—
1.300
33.02
UL94V-0
Socket
Finish
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
.550
[13.97]
.800
[20.32]
Socket Header Part Numbers
Standard
Tail2
350762-4
350762-5
350827-1
350827-4
350763-4
350763-5
350828-1
350828-4
350764-4
350764-5
350829-1
350829-4
350765-4
350765-5
350830-1
350830-4
Standard Tail
Polarized2
643423-1
—
643424-1
643424-3
643425-1
—
643426-1
643426-3
—
—
643428-1
—
643429-1
—
643430-1
—
Long Tail3
350989-4
350989-5
350834-1
350834-4
350990-4
350990-5
350835-1
350835-4
350991-4
350991-5
350836-1
350836-4
350992-4
—
350837-1
350837-4
Mates with Plug
Housing Part Number
(Using Pin Contacts)
Universal
Universal
MATE-N-LOK MATE-N-LOK II
1-480704-0
350715-1
1-480706-0
350720-1
1-480708-0
350735-1
1-480710-0
350736-1
—
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
.550
13.97
UL94V-2
12
Long Tail3
Mates with Plug
Housing Part Number
(Using Pin Contacts)
Universal
Universal
MATE-N-LOK MATE-N-LOK II
Standard Density
A
Dim.
UL94V-0
9
Socket Header Part Numbers
Polarizing
feature
UL94V-2
6
.300
[7.62]
Standard
Tail2
350759-4
350759-5
350824-1
350824-4
350760-4
350760-5
350825-1
350825-4
350761-4
350761-5
350826-1
350826-4
640467-1
640467-3
640901-1
640901-3
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
Number of
Circuits
.550
[13.97]
770020-1
—
770021-1
—
770022-1
—
770023-1
1Duplex
Note: Header Housings on pages
182-185 are available in colors
listed on page 188. Call Technical
Support for exact Part Numbers.
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
2Use Standard Tail for .062 [1.57] thick PC Board.
3Use Long Tail for .125 [3.18] thick PC Board.
Note: All part numbers are RoHS Compliant.
183
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
Recommended
PC Board
Hole Layouts
for Pin and Socket
Vertical Headers
.250
Typ.
[6.35]
.070
Dia. Typ.
[1.78]
.175
[4.45]
2, 3, 4, 5, 6 and 8
Circuit, In-Line
olarizing Hole
See Note
No. 1 Position
2 Circuit
3 Circuit
Related Product Data
4 Circuit
Vertical Headers—pages 182-183
5 Circuit
6 Circuit
8 Circuit
6, 9, 12 and 15
Circuit, Matrix
Polarizing Hole
See Note
Polarizing Hole
See Note
.175
[4.45]
.250
Typ.
[6.35]
.250
Typ.
[6.35]
.175
[4.45]
No. 2 Circuit
No. 2 Circuit
.250
Typ.
[6.35]
.250
Typ.
[6.35]
No. 1 Circuit
No. 1 Circuit
.070 Dia. Typ.
[1.78]
.070 Dia. Typ.
[1.78]
.250
Typ.
[6.35]
.250
Typ.
[6.35]
.175
[4.45]
.175
[4.45]
Polarizing Hole
See Note
Polarizing Hole
See Note
250
Typ.
.35]
No. 2 Circuit
No. 2 Circuit
.070
Dia. Typ.
[1.78]
.250
Typ.
[6.35]
No. 1 Circuit
No. 1 Circuit
.070
Dia. Typ.
[1.78]
Note: Polarizing hole .070 [1.78] Dia. required for polarized headers only.
Standard Density
PC Board Vertical
Pin Headers with
ACTION PIN Contacts
.250
[6.35]
A
Material and Finish
Housing — PBT, black
Flammability Rating — UL94V-0
.299
[7.59]
Contacts — Copper alloy, plated with
tin over nickel on entire contact
Related Product Data
Number of
Circuits
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
Performance Characteristics—
pages 169-170
Technical Documents — pages 169
and 205-206
Product Specification
108-5222 ACTION PIN Universal
MATE-N-LOK Header
Assembly
.200 ± .004 Typ.
[5.08 ± 0.10]
A Dim. Part Number
.750
19.05
1.000
25.40
1.250
31.75
2
3
4
173924-1
173925-1
173926-1
.630
Max.
[16.00]
Mates with Plug Housing
Part Number (Using Socket Contacts)
Universal
Universal
MATE-N-LOK
MATE-N-LOK II
1-480698-0
770017-1
350777-1
1-480700-0
770018-1
350766-1
1-480702-0
770019-1
350779-1
Note: Install in PC Board with arbor tool.
Note: All part numbers are RoHS Compliant.
Mating Connectors
.062 Ref.
[1.57]
Universal MATE-N-LOK
Plug Housings — page 174
4 Circuit
3 Circuit
2 Circuit
Universal MATE-N-LOK II
Plug Housings — pages 193-194
.100 ± .004
[2.54 ± 0.10]
Note: Header Housings on pages
182-185 are available in colors
listed on page 188. Call Technical
Support for exact Part Numbers.
Dia. After
Reflow
.032 ± .002
[0.81 ± 0.05]
.200 ± .004
[5.08 ± 0.10]
Recommended PC Board Hole Layout
.001-.003
[0.03-0.08]
.038 ± .001
[0.97 ± 0.03 ]
.0003-.0012
[0.01-0.03]
PC Board Hole Dimensions
184
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
PC Board Right-Angle
Pin and Socket Headers
2, 3, 4, 5, 6 and 8 Circuit, In-line
.505
[12.83]
.250 [6.35] Centerline spacing
.060 Dia. Typ.
[1.52]
.150
Dia.
[3.81]
2 Places
.680
[17.27]
Material
Housing — Nylon
.250
[6.35]
Typ.
No. 1 Circuit
Contacts — Phosphor bronze
Solder tail width .052 [1.32]
.290
[7.37]
.250
Typ.
[6.35]
Related Product Data
Use 6-32 UNC Pan Head Screw
3/8 [9.53] long for mounting
(Not Supplied)
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 169-170
Technical Documents— pages 169
and 205-206
Mating Connectors
Universal MATE-N-LOK
Plug Housings — page 174
Universal MATE-N-LOK II
Plug Housings — pages 193-194
Note: Header Housings on pages
182-185 are available in colors
listed on page 188. Call Technical
Support for exact Part Numbers.
.100
[2.54]
.360
[9.14]
.160
[4.06]
Dimensions
No. of
Circuits
A
B
UL94V-2
C
Contact
Finish
Pin
2
.550
13.97
3
.800
20.32
4
1.050
26.67
5
1.300
33.02
6
1.550
39.37
8
2.050
52.07
Recommended PC Board Hole Layout
.062 [1.57] Board Thickness
Socket
Right-Angle Header Part Numbers
UL94V-0
Mates
with
—
—
—
1.245 .830 Pre-tin
31.62 21.08
Duplex1
—
—
—
—
—
1.495 1.080 Pre-tin
—
37.97 27.43 Duplex1
—
—
—
1.745 1.330 Pre-tin 1-350948-0
1-480702-0
44.32 33.78 Duplex1
—
—
—
1.995 1.580 Pre-tin 1-350949-0
1-480763-0
50.67 40.13 Duplex1
—
—
2.245 1.830 Pre-tin 640587-1 643235-1 640585-1
57.02 46.48 Duplex1
—
—
2.745 2.330 Pre-tin
643237-1 640586-1
69.72 59.18 Duplex1
—
Pin
1-350942-0
770994-12
3-350942-0
1-350943-0
3-350943-0
1-350944-0
3-350944-0
1-350945-0
3-350945-0
640583-1
640583-3
640584-1
640584-3
Mates with
Universal
Universal
MATE-N-LOK MATE-N-LOK II
643226-1
—
350777-1 770017-1
—
643228-1
350766-1 770018-1
3-643228-0
643230-1
350779-1 770019-1
3-643230-0
643232-1
350809-1 770016-1
3-643232-0
643234-1
640581-1
—
3-643234-0
643236-1
640582-1
—
3-643236-0
Socket
Standard Density
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
2Black in color.
[.00127] min. nickel underplate on entire contact.
Test Connectors
(with spring loaded
contacts)
2, 3, 4 and 5 Circuit,
In-Line
Material
Plug
Housing — Nylon
Related Product Data
6, 9, 12 and 15 Circuit,
Matrix
Mating Connectors — Housings and
headers having the same number of
circuits. The housings can have pin or
socket contacts, or a combination
of both.
Mating Housings — page 174
Mating Headers — pages 182-185
Other Mating Connectors
Universal MATE-N-LOK II Housings—
pages 193-194
Notes:
1. Test probes have 5 amp maximum current rating. 1,000,000
cycles.
2. Test Connector housings are of
the same configuration as standard housings. Refer to page 23
for dimensional specifications.
.084 [2.13] Dia. Pin
Mates with
Universal
MATE-N-LOK
Sockets
Plug
Number of
Circuits
2
3
4
5
6
9
12
15
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
Flammability Rating — UL94V-0
Cap
Cap
Part Numbers
Plug
350848-2
350848-3
350848-4
350848-5
350848-6
350848-9
1-350848-2
1-350848-5
Cap
350849-2
350849-3
350849-4
350849-5
350849-6
350849-9
1-350849-2
1-350849-5
Note: All part numbers are RoHS Compliant.
185
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Circular
Connectors
Connectors
(Continued)
Product Facts
Unique product designed to
accommodate the specific
needs of the lighting
industry
■ Circular design allows the
connector to pass through
7/8 inch knock-out holes in
electrical fixtures and boxes
■ 6-position accommodates
most major electrical
industry requirements
■ Universal MATE-N-LOK
connector centerline
spacing maintains UL and
CSA approvals
■ Uses standard Universal
MATE-N-LOK contacts and
application tooling
■ Positive polarized housing
helps prevent incorrect
mating
■ UL Recognized,
File No. E28476
■ CSA Certified,
File No. LR7189
■
R
Applications
Primary applications are in
the Lighting, Vending, and
Appliance industries
■ Applications where use of a
completed harness that will
pass through a 7/8 inch
knock-out is required
■ Provides the capability to
quickly disconnect
individual fixtures from
sensitive environmental
areas and perform
maintenance at other sites
■ Not for interrupting current
Universal MATE-N-LOK Circular Connectors
.250 [6.35] Centerline
Standard Density
■
Performance Characteristics
Technical Documents
Voltage—600 V AC or DC
Current—20 amps maximum per
UL-1977 (6 position, fully energized)
Dielectric Withstanding Voltage—
5 KVAC or KVDC
Insulation Resistance—1000 MΩ
max. between adjacent circuits
Durability—50 cycles mating and
unmating
Contact Retention—
15 lb. minimum per contact
Product Specification
108-2069 Universal MATE-N-LOK
Circular Connector
Application Specification
114-1010 Universal MATE-N-LOK
Connectors
186
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Circular
Connectors
Connectors
(Continued)(Continued)
Plug
45˚
2 Plc.
Part No. 794911-1
1.080
[27.43]
.460
[11.68]
.820
[20.83]
Ref.
.810
[20.57] Ref.
Cap
45˚
2 Plc.
Part No. 794912-1
1.080
[27.43]
.820
[20.83]
Standard Density
.810
[20.57]
Material and Finish
Housings—Nylon, UL 94V-2 rated
Universal MATE-N-LOK Circular Connectors
.250 [6.35] Centerline
Related Product Data
Contacts—pages 172-173
Note: All part numbers are RoHS Compliant.
187
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Connectors (Continued)
— Available in Colors
Note: See corresponding Universal
MATE-N-LOK Plug and Cap Housing
Base Part Numbers on page 175.
Universal MATE-N-LOK Connectors — Available in Colors
.250 [6.35] Centerline
Standard Density
Header Housings on pages 182-185
are also available in colors. Call
Technical Support for exact Part
Numbers.
Base Part Number
480698
480699
480700
480701
480702
480703
480763*
480764*
480704
480705
480706
480707
480708
480709
480710
480711
350777
350778
350766
350767
350799
350780
350809
350810
350715
350781
350720
350782
350735
350783
350736
350784
Dash Number
1-xxxxxx-0
1-xxxxxx-1
1-xxxxxx-2
1-xxxxxx-3
1-xxxxxx-4
1-xxxxxx-5
1-xxxxxx-6
1-xxxxxx-8
1-xxxxxx-9
No. of Circuits
2
2
3
3
4
4
5
5
6
6
9
9
12
12
15
15
2
2
3
3
4
4
5
5
6
6
9
9
12
12
15
15
Housing
Plug
Cap
Plug
Cap
Plug
Cap
Plug*
Cap*
Plug
Cap
Plug
Cap
Plug
Cap
Plug
Cap
Plug
Cap
Plug
Cap
Plug
Cap
Plug
Cap
Plug
Cap
Plug
Cap
Plug
Cap
Plug
Cap
Material
V-2
V-2
V-2
V-2
V-2
V-2
V-2
V-2
V-2
V-2
V-2
V-2
V-2
V-2
V-2
V-2
V-0
V-0
V-0
V-0
V-0
V-0
V-0
V-0
V-0
V-0
V-0
V-0
V-0
V-0
V-0
V-0
Color
Natural
Brown
Red
Orange
Yellow
Green
Blue
Gray
Black
* Special for Base
Part Numbers 480763 and
480764
Dash Number
xxxxxx-1
1-xxxxxx-1
1-xxxxxx-2
1-xxxxxx-3
1-xxxxxx-4
1-xxxxxx-5
1-xxxxxx-6
1-xxxxxx-8
1-xxxxxx-9
Color
Natural
Brown
Red
Orange
Yellow
Green
Blue
Gray
Black
188
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK II Connectors
Product Facts
■
High reliability
■
For use where repair or replacement would be difficult
■
Pins and sockets can be
intermixed in the same
housing
■
Available in 2 through
15 circuit sizes for freehanging or panel mount
wire-to-wire connection
■
Mate with standard
Universal MATE-N-LOK
Housings and PC Board
Headers
■
Uses standard Universal
MATE-N-LOK panel cutouts
and strain reliefs
■
Polarized housings available
in UL94V-0 flammability
rated material
■
Enclosed contacts for shock
protection
■
F-Crimp terminals accept
30-10 AWG [.05 -5.0 mm2]
wire sizes
■
Contacts available in strip
and loose form
Technical Documents
The Universal MATE-N-LOK II
Connector performance characteristics
found on pages 189-190 are based on
free-hanging and panel mount connectors, loaded with contacts crimped on
stranded wire.
Product Specification
108-1090 Universal MATE-N-LOK II
Connectors
Application Specification
114-1043 Universal MATE-N-LOK II
Connectors
Instruction Sheet
408-3200 Housing, Contacts and
Accessories
■
Lanceless contacts for
tangle-free handling
■
Insulation capability to
.200 [5.08] diameter
■
Connector design provides
for complete contact
insertion
Dielectric Withstanding Voltage—
5.0 KV AC or DC between adjacent
circuits initially
■
Three-point stabilization precisely controls contact alignment, minimizing stubbing
Insulation Resistance—
1000 megohms minimum between
adjacent circuits
■
Tin or duplex gold plated
contacts
Voltage Rating—600 V AC or DC
■
Contacts are on .250 [6.35]
centerline spacing
■
Not for interrupting current
■
Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline
■
Certified by Canadian
Standards Association,
File No. LR 7189
Connector Mating—
Split Pin — 1.5 lb. max. per circuit
Connector Unmating—
Split Pin — .5 lb. min. per circuit
Contact Insertion Force—3.0 lb.
max. per contact unassembled
Contact Retention—35 lb. min. per
contact
R
■
Standard Density
Performance Characteristics
Durability—50 cycles, mating and
unmating
R
Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
189
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK II Connectors (Continued)
Performance
Characteristics (Continued)
Maximum Current—Maximum current rating of Universal MATE-N-LOK II
connectors is limited by the maximum
operating temperature of the housings
which is 120°C including the temperature rise of the contacts which is a maximum of 30°C. There are several
variables which have a direct effect on
this maximum current-carrying capability for a given connector and must be
considered for each application. These
variables are:
Wire Size—Larger diameter wire will
carry more current since it has less
internal resistance to current flow and
thus generates less heat. Longer wire
lengths also enhance current carrying
capabilities since the wire conducts heat
away from the connector.
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
Wire-to-Wire
Calculated Current Table
Number of
Circuits
2
3
4
5
6 Matrix
8
9
10
12
15
10
19.00
17.50
16.50
16.00
15.00
14.50
13.50
14.00
12.50
12.00
12
18.00
16.50
15.50
15.00
14.00
14.00
12.50
13.00
12.00
11.50
14
17.00
15.50
15.00
14.00
13.00
13.00
11.50
12.50
11.00
10.00
16
14.50
13.00
12.50
12.00
11.00
10.50
9.50
10.00
9.00
8.50
Wire Gauge
18
20
13.00
10.00
12.00
9.00
11.00
8.50
10.50
8.00
9.50
7.50
9.50
7.50
8.50
6.50
9.00
7.00
8.00
6.00
7.50
6.00
22
8.00
7.50
7.00
6.50
6.00
6.00
5.50
5.50
5.00
4.50
24
6.50
6.00
5.50
5.50
5.00
5.00
4.50
4.50
4.00
4.00
26
5.50
5.00
4.50
4.50
4.00
4.00
3.50
3.50
3.00
3.00
30
3.50
3.00
3.00
3.00
2.50
2.50
2.00
2.50
2.00
2.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection
of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully
loaded housings being 100% energized. Note: All combinations were not tested, and this chart contains interpolated
and extrapolated values.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Minimum Wire Lengths for T-Rise vs. Current Testing
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
AWG
30
28
26
24
20
Universal MATE-N-LOK II connectors
also will withstand the following tests:
Min. Length (in.)
2.6
3.2
4.1
5.1
7.8
AWG
18
16
14
12
10
Min. Length (in.)
9.4
11.3
13.7
16.4
19.3
Note: If wire lengths used are less than those listed above, the current carrying ability of the system will be reduced due to less heat being conducted
away from the connector. The customer should fully test all applications.
Vibration—10-55-10 cycles per
minute at .06 inch total excursion
Standard Density
Physical Shock—18 drops,
50 g sawtooth at 10 milliseconds
Housing Panel Retention—75 lb. min.
Wire-to-Board
Housing Lock Strength—35 lb. min.
Due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a
separate current carrying chart for our printed circuit board header products. However, the above Wire-to-Wire charts
may be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. For vertical
headers, only 95% of the Wire-to-Wire value should be used. For right-angle headers, only 75% of the Wire-to-Wire
value should be used. The chart values are only a tool for connector selection and will require the customer to fully
test their application.
Thermal Shock— -55°C to +85°C
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
Corrosion—48 hr. at 5% salt
concentration
Termination Resistance/Contact Crimp Tensile Force
Wire Size
AWG
mm2
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline
Related Product Data
Product Specification
108-1090 Universal MATE-N-LOK II
Connectors
30
28
26
24
22
20
18
16
14
12
10
.05
.08
.12
.2
.3
.5
.8
1.2
2.0
3.0
5.0
Termination
Resistance
Test
Resistance
Current
Milliohms
(Amps)
(Max. Init.)
—
—
—
1.5
3
4.5
6
8
10
—
—
—
—
—
3.50
3.50
3.00
3.00
2.75
2.75
—
—
Contact
Crimp
Tensile Force
Force (Min.)
lbs.
N
1.5
7
3
13
5
22
7
31
12
53
17
66
30
133
45
200
50
222
60
267
70
311
Note: This is the total resistance between wire crimps of a mated pin and
socket.
190
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK II Connectors (Continued)
Universal MATE-N-LOK II Connector Mating Combinations
Connector Part Number
Number
Flammability Style
of
Rating
Circuits
Plug Kit
Part
Number2
Cap Kit
Part
Plating
Number2
2
UL94V-0
In-Line 770017-1
770024-1
3
UL94V-0
In-Line 770018-1
770025-1
4
UL94V-0
In-Line 770019-1
770026-1
5
UL94V-0
In-Line 770016-1
—
6
UL94V-0
Matrix 770020-1
770027-1
9
UL94V-0
Matrix 770021-1
770028-1
12
UL94V-0
Matrix 770022-1
770029-1
15
UL94V-0
Matrix 770023-1
770030-1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Mating Connector Part Number
PC Board Headers
Vertical Pin2
Vertical Socket2
Standard
Standard
Standard
Long
Standard
Tail
Tail
Tail
Tail
Tail
Polarized
Polarized
350786-1
350786-3
350789-1
350789-3
350792-1
350792-3
640900-1
640900-3
350711-1
350711-4
350712-1
350712-4
350713-1
350713-4
350714-1
350714-4
641964-1
641964-3
641966-1
—
641968-1
—
643406-1
—
641970-1
641970-3
641972-1
641972-3
641974-1
641974-3
641976-1
641976-4
350787-1
350787-3
350790-1
350790-3
350793-1
350793-3
—
—
350732-1
350732-4
350742-1
350742-4
350737-1
350737-4
350738-1
350738-4
350824-1
350824-4
350825-1
350825-4
350826-1
350826-4
640901-1
640901-3
350827-1
350827-4
350828-1
350828-4
350829-1
350829-4
350830-1
350830-4
643412-1
643412-3
643414-1
643414-3
643416-1
—
—
—
643424-1
643424-3
643426-1
643426-3
643428-1
—
643430-1
—
Right-Angle2
Long
Tail
350831-1
—
350832-1
350832-4
350833-1
350833-4
—
—
350834-1
350834-4
350835-1
350835-4
350836-1
350836-4
350837-1
350837-4
Pin
Socket
1-350942-0 643226-1
3-350942-0
—
1-350943-0 643228-1
3-350943-0 3-643228-0
1-350944-0 643230-1
3-350944-0 3-643230-0
1-350945-0 643232-1
3-350945-0 3-643232-0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate
on entire contact.
2Universal MATE-N-LOK II Plug and Cap housings accept pin or socket contacts. Use the appropriate contacts in the Plug housing as required by the
mating component.
Note: All part numbers are RoHS Compliant.
Standard Density
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline
191
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK II Connectors (Continued)
Contacts
Related Product Data
Split pin diameter .086 [2.18]
Stock thickness .012 [.305]
These contacts can be used in either
Universal MATE-N-LOK II Plug or Cap
housings.
Product Specification
108-1090 Universal MATE-N-LOK II Connectors
Application Specification
114-1043 Universal MATE-N-LOK II Contacts
L
L
Performance Characteristics— pages 189-190
Housings— pages 193-194
Technical Documents— pages 189 and 205-206
Application Tooling— pages 207-210
Socket
Pin
Contact Part Numbers
Wire Size
Range
AWG [mm2]
Ins. Dia.
Range
30 -26
[.05 -.12]
.032 -.057
.813 -1.45
24 -18
[.2 -.8]
L Dim.
Pin
Socket
1.005
25.53
.980
24.90
.040 -100
1.02 -2.54
1.005
25.53
.980
24.90
.060 -.130
1.52 -3.30
1.005
25.53
.980
24.90
.130 -.200
3.30 -5.08
.995
25.27
.970
24.63
.200 max.3
5.08
1.005
25.53
.980
24.90
20 -14
[.5 -2.0]
12 -10
[3.0 -5.0]
Pin
Material & Finish
Socket
Strip
Form
Loose
Piece
Strip
Form
770011-6
770512-6
Brass. Pre-tin
Brass. Duplex2
Phos. Brz. Pre-tin
Phos. Brz. Duplex2
Brass. Pre-tin
Brass. Duplex2
Phos. Brz. Pre-tin
Phos. Brz. Duplex2
Brass. Pre-tin
Brass. Duplex2
Phos. Brz. Pre-tin
Phos. Brz. Duplex2
770009-1
1-770009-0
—
—
770007-1
1-770007-0
—
—
770005-1
1-770005-0
770005-3
1-770005-1
770252-1
1-770252-0
—
—
770250-1
1-770250-0
—
—
770248-1
1-770248-0
—
—
—
—
—
—
770010-3 770253-3
1-770010-0 1-770253-0
—
—
—
—
770008-3 770251-3
1-770008-0 1-770251-0
—
—
—
—
770006-3 770249-3
1-770006-0 1-770249-0
Phos. Brz. Pre-tin
Phos. Brz. Duplex2
770003-3
1-770003-0
770246-3
1-770246-0
770004-3 770247-3
1-770004-0 1-770247-0
Phos. Brz. Gold1
770012-6
Loose
Piece
770416-6
HDM
Applicator
Part No.
Hand Tool
Part No.
567252-16
567252-46
58439-1
567214-16
567214-26
567214-46
91510-1
567213-16
567213-26
567213-46
91500-1
567212-16
567212-26
567212-46
91508-14
91506-14
567211-16
567211-26
567211-46
69710-1 5
1Gold Finish — Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact.
2Duplex Finish — Plated with .000030 [.000762] min. gold in mating area and .000050 [.00127] min. tin in crimp area over .000050 [.00127] min. nickel
underplate on entire contact.
Standard Density
3There is no insulation barrel on this contact. Insulation maximum diameter is limited by the housing. Use of strain relief is recommended with these contacts.
4Use Hand Tool No. 91508-1 for 20 – 18 AWG and No. 91506-1 for 16 – 14 AWG.
5Hand Tool No. 69710-1 uses die set No. 58380-1 for 12 AWG and No. 58380-2 for 10 AWG.
6HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K
Machine, -4 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information.
Grounding Pin
(Mate first, break last, not for interrupting
current)
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline
Solid pin diameter .084 [2.13]
.100 [2.54] longer than standard pin
Stock thickness .012 [.304]
These contacts can be used in either
Universal MATE-N-LOK II Plug or Cap
housings only.
L
Wire Size
Range
AWG [mm2]
20 -14
[.5 -2.0]
Contact Part Numbers
Strip Form
Loose Piece
Ins. Dia.
Range
L
Dim.
Material & Finish
.060 -.130
1.52-3.30
1.105
25.53
Brass. Pre-tin
Brass. Duplex1
770193-1
1-770193-0
770254-1
1-770254-0
.130-.200
3.30-5.08
1.085
27.56
Brass. Pre-tin
Brass. Duplex1
770194-1
1-770194-0
770255-1
1-770255-0
HDM
Applicator
Part No.
567213-13
567213-23
567213-43
567212-13
567212-23
567212-43
Hand Tool
Part No.
91500-1
91508-12
91506-12
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area and .000050 [.00127] min. tin in crimp area
over .000050 [.00127] min. nickel underplate on entire contact.
AWG and No. 91506-1 for 16 –14 AWG.
-1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used
on AMP-O-LECTRIC Model K Machine, -4 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for
further information.
2Use Hand Tool No. 91508-1 for 20 –18
3HDM Applicator part number ending in
Latch Disengaging Tool
Part No. 58382-1
IS 408-9436
Contact Extraction Tool
(For extracting contacts crimped
on 24 AWG or smaller wire)
Part No. 318851-1
IS 408-4371
Note: All part numbers are RoHS Compliant.
Contact Insertion Tool
(For inserting contacts applied to small diameter wire)
Part No. 91002-1
IS 408-7347
192
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK II Connectors (Continued)
Housing Kits
2 Circuit, In-line
Free-Hanging or Panel Mount
.250 [6.35] Centerline spacing
.550
[13.97]
.550
[13.97]
Material — Nylon
Flammability Rating — UL 94V-0
.845
[21.46]
Max.
.580
[14.73]
.300
[7.62]
Related Product Data
Performance Characteristics—
pages 189-190
Contacts— page 192
Panel Cutout Recommendations—
page 195
Keying Plug— page 196
Strain Reliefs— page 196
Kit Components— page 195
Technical Documents— pages 189
and 205-206
Other Mating Connectors
Universal MATE-N-LOK Housings —
page 175
Universal MATE-N-LOK Headers —
pages 182-183 and 185
Universal MATE-N-LOK Test
Connectors — page 185
Plug Front
Plug Rear
Product Specification
108-1090 Universal MATE-N-LOK II
Connectors
.905
[22.98]
.550
[13.97]
.550
[13.97]
.905
[22.98]
.845
[21.46]
Max.
.300
[7.62]
Cap Front
.580
[14.73]
Cap Rear
3, 4 and 5 Circuit,
In-Line
A
A
.845
[21.46]
Max.
.580
[14.73]
.905
[22.98]
.300
[7.62]
Plug Rear
Plug Front
Standard Density
A
A
.905
[22.98]
.845
[21.46]
Max.
.300
[7.62]
Cap Rear
Number
of
Circuits
2
3
4
5
Note: All part numbers are RoHS Compliant.
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline
Cap Front
.580
[14.73]
A
Dim.
—
.800
20.32
1.050
26.67
1.300
33.02
Kit Part Numbers
(Includes Front and Rear)
Plug
Cap
770017-1
770024-1
770018-1
770025-1
770019-1
770026-1
770016-14
—
Notes:
1. Kits consist of a front and rear component.
2. Kit components can be purchased separately. Page 195.
3. Packaging: Bulk — 250 each component per poly bag/box.
4. Mates with standard Universal MATE-N-LOK cap housing P/N 350810-1
and 640900-X or 640901-X Vertical headers.
193
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK II Connectors (Continued)
Housing Kits
6 Circuit, Matrix
Free-Hanging or Panel Mount
.250 [6.35] Centerline spacing
Material — Nylon
Flammability Rating — UL 94V-0
.800
[20.32]
1.080
[27.43]
.845
[21.46]
Max.
.550
[13.97]
Related Product Data
Product Specification
108-1090 Universal MATE-N-LOK II
Connectors
Performance Characteristics—
pages 189-190
Contacts— page 192
Panel Cutout Recommendations—
page 195
Keying Plug— page 196
Strain Reliefs— page 196
Kit Components— page 195
Technical Documents— pages 189
and 205-206
Plug Front
Plug Rear
.800
[20.32]
1.020
[25.91]
1.080
[27.43]
.845
[21.46]
Max.
.550
[13.97]
.905
[22.99]
Cap Front
Other Mating Connectors
Universal MATE-N-LOK Housings —
page 176
Universal MATE-N-LOK Headers —
pages 182-183 and 185
Universal MATE-N-LOK Test
Connectors — page 185
.550
[13.97]
Cap Rear
9, 12 and 15 Circuit,
Matrix
.800
[20.32]
1.080
[27.43]
.845
[21.46]
Max.
A
.905
[22.99]
A
Plug Rear
Standard Density
.905
[22.99]
.550
[13.97]
Plug Front
.800
[20.32]
1.020
[25.91]
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline
.905
[22.99]
1.080
[27.43]
.845
[21.46]
Max.
A
Cap Front
Number
of
Circuits
6
9
12
15
A
Dim.
—
.800
20.32
1.050
26.67
1.300
33.02
A
Cap Rear
Kit Part Numbers
(Includes Front and Rear)
Plug
Cap
770020-1
770027-1
770021-1
770028-1
770022-1
770029-1
770023-1
770030-1
Notes:
1. Kits consist of a front and rear component.
2. Kit components can be purchased separately. Page 195.
3. Packaging: Bulk — 250 each component per poly bag/box.
Note: All part numbers are RoHS Compliant.
194
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK II Connectors (Continued)
Housing Components
Free-Hanging or Panel Mount
Rear
Housing
Section
.250 [6.35] Centerline spacing
Material — Nylon
Flammability Rating — UL 94V-0
Related Product Data
Rear
Housing
Section
Product Specification
108-1090 Universal MATE-N-LOK II
Connectors
Performance Characteristics—
pages 189-190
Contacts— page 192
Illustrations and Dimensions—
pages 193-194
Panel Cutout Recommendations—
page 195
Keying Plug— page 196
Strain Reliefs— page 196
Technical Documents— pages 189
and 205-206
Other Mating Connectors
Universal MATE-N-LOK Connectors —
page 176
Universal MATE-N-LOK Headers —
pages 182-183 and 185
Universal MATE-N-LOK Test
Connectors — page 185
Front Housing
Section
Plug Housing
Cap Housing
Kit Component Part Numbers
Number
of
Circuits
Plug
Front
770031-1
770033-1
770035-1
770319-1
770037-1
770039-1
770041-1
770043-1
Kit
770017-1
770018-1
770019-1
770016-1
770020-1
770021-1
770022-1
770023-1
2
3
4
5
6
9
12
15
Rear
770032-1
770034-1
770036-1
770320-1
770038-1
770040-1
770042-1
770044-1
Kit
770024-1
770025-1
770026-1
—
770027-1
770028-1
770029-1
770030-1
Cap
Front
770045-1
770047-1
770049-1
—
770051-1
770053-1
770055-1
770057-1
Rear
770046-1
770048-1
770050-1
—
770052-1
770054-1
770056-1
770058-1
Notes:
1. Kits consist of a front and rear component.
2. Kit components can be purchased separately.
Note: All part numbers are RoHS Compliant.
Number of
Circuits
.110
[2.79]
D
.175
[4.45]
B
2
3
Note 3
Refer to Application Specification
114-1043
4
E
.100
[2.54]
Note
2
A
6
12
Note 4
C
.175
[4.45]
15
B
.340
8.63
.340
8.63
.340
8.63
.480
12.19
.480
12.19
.480
12.19
.480
12.19
Dimensions
C
.095
2.41
.095
2.41
.095
2.41
.275
6.99
.275
6.99
.275
6.99
.275
6.99
D
.530
13.46
.530
13.46
.530
13.46
1.030
26.16
1.030
26.16
1.030
26.16
1.030
26.16
E
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.350
8.89
.350
8.89
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline
9
A
.565
14.35
.815
20.70
1.065
27.05
.565
14.35
.815
20.70
1.065
27.05
1.315
33.40
Standard Density
Recommended
Cap Housing
Panel Cutouts
View is from cap entry side
Front
Housing
Section
Notes:
1. Recommended panel thickness — .030-.090 [.762-2.286]. Panel must be punched so that housing enters panel in
same direction as the punch.
2. Optional — Do not remove this material when keying cap housing to panel.
3. Circuit #1 location when using panel keying with 6, 9, 12 and 15 circuit housings.
4. Circuit #1 location when using panel keying with 2, 3, and 4 circuit housings.
195
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK II Connectors (Continued)
Plug or
Cap Housing
Strain Reliefs
2, 3, 4, 5, 6, 9, 12 and 15
Circuit (Enclosed)
Insert
Note 2
IS 408-3320
Insert
Note 2
Material — Nylon
Flammability Rating — UL 94V-0
1.300
[33.02]
1.300
[33.02]
A
A
2 Req’d/Assy.
Note 3
2 Req’d/Assy.
Note 3
(2) #6x3/8 Lg. Type B
Pan head sheet metal
screws (not supplied)
(2) #6x3/8 Lg. Type B
Pan head sheet metal
screws (not supplied)
In-Line
Style
Matrix
Number of
Circuits
A
Dim.
2
.960
24.38
3
Insert
Supplied
1.140
28.96
In-Line
4
5
Standard Density
6
Matrix
9
12
15
1.340
34.04
1.530
38.86
1.030
26.16
1.030
26.16
1.280
32.51
1.530
38.86
Single Wire
Dia. Range
.040 – .190
1.02 – 4.83
Wire Bundle
Dia. Range
Strain Relief
Part Numbers
—
640713-1
No
—
.200 – .350
5.08 – 8.89
640713-2
Yes
.040 – .190
1.02 – 4.83
—
640714-1
No
—
.200 – .350
5.08 – 8.89
641945-1
Yes
.040 – .190
1.02 – 4.83
—
641776-1
No
—
.200 – .350
5.08 – 8.89
641776-2
Yes
.040 – .190
1.02 – 4.83
—
643030-1
No
—
643030-4
Yes
—
Yes
—
Yes
—
Yes
—
.200 – .350
5.08 – 8.89
.120 – .650
3.05 – 16.51
.120 – .650
3.05 – 16.51
.150 – .750
3.81 – 19.05
.200 – .850
5.08 – 21.59
Yes
640715-1
640716-1
640717-1
640718-1
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline
Notes:
1. Insert comes attached to strain relief. It can be used to provide additional adjustment for small wire bundles or discarded.
2. Insert to be positioned as shown by dotted lines.
3. Strain relief part number represents one-half of a strain relief. Two of a part number are required for one connector.
Keying Plug
.940
[23.88]
.130
[3.30]
IS 408-3200
Related Product Data
Housings— pages 193-194
Technical Documents— pages 189
and 205-206
Part Number
UL94V-0 Nylon material — 770377-1
Note: All part numbers are RoHS Compliant.
196
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Headers for UMNL II Connectors
PC Board Vertical
Pin Headers
2, 3, 4 and 5
Circuit, In-Line
Polarizing
feature
.250 [6.35] Centerline spacing
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
Material
Housing — Nylon
Flammability Rating — UL94V-0
Contacts — Phosphor bronze
Solder tail diameter .062 [1.57]
.300
[7.62]
.550
[13.97]
Number of
Circuits
A
Dim.
Pin
Finish
Pin Header Part Numbers
Standard
Standard Tail
Long Tail3
2
Polarized2
Tail
2
.550
13.97
Pre-tin
350786-1
Duplex1
350786-3
Pre-tin
350789-1
Duplex1
350789-3
350792-1
350792-3
640900-1
640900-3
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
3
Performance Characteristics—
pages 189-190
Recommended PC Board Hole
Layout— page 199
Technical Documents— pages 189
and 205-206
.800
20.32
4
1.050
26.67
5
1.300
33.02
Pre-tin
Duplex1
Pre-tin
Duplex1
641964-1
1-641964-14
641964-3
641966-1
1-641966-14
—
641968-1
—
643406-1
—
350787-1
Mates with Plug
Housing Part Number
(Using Socket Contacts)
Universal
Universal
MATE-N-LOK II MATE-N-LOK
770017-1
350777-1
770018-1
350766-1
770019-1
350779-1
770016-1
350809-1
350787-3
350790-1
350790-3
350793-1
350793-3
—
—
1Duplex
Mating Connectors
Universal MATE-N-LOK II
Plug Housings — pages 193-194
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
Standard Tail for .062 [1.57] thick PC Board.
3Use Long Tail for .125 [3.18] thick PC Board.
4Black in color.
2Use
Universal MATE-N-LOK
Plug Housings — page 175
6, 9, 12 and 15
Circuit, Matrix
Polarizing
feature
Pin
Finish
6
.550
13.97
Pre-tin
Duplex1
350711-1
350711-4
9
.800
20.32
Pre-tin
350712-1
Duplex1
350712-4
15
1.050
26.67
1.300
33.02
Pre-tin
350713-1
Duplex1
Pre-tin
Duplex1
350713-4
350714-1
350714-4
641970-1
641970-3
641972-1
1-641972-14
641972-3
641974-1
1-641974-14
641974-3
641976-1
641976-4
350732-1
350732-4
350742-1
Mates with Plug
Housing Part Number
(Using Socket Contacts)
Universal
Universal
MATE-N-LOK II MATE-N-LOK
770020-1
350715-1
770021-1
350720-1
770022-1
350735-1
770023-1
350736-1
Universal MATE-N-LOK Headers
.250 [6.35] Centerline
A
Dim.
12
.800
[20.32]
.550
[13.97]
Pin Header Part Numbers
Standard
Standard Tail
Long Tail3
Polarized2
Tail2
Number of
Circuits
Standard Density
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
350742-4
350737-1
350737-4
350738-1
350738-4
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
2Use Standard Tail for .062 [1.57] thick PC Board.
3Use Long Tail for .125 [3.18] thick PC Board.
4Black in color.
Note: All part numbers are RoHS Compliant.
197
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Headers for UMNL II Connectors (Continued)
PC Board Vertical
Socket Headers
2, 3, 4 and 5
Circuit, In-Line
Polarizing
feature
.250 [6.35] Centerline spacing
Material
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
Housing — Nylon
Flammability Rating — UL94V-0
.550
[13.97]
.300
[7.62]
Contacts — Phosphor bronze
Solder tail diameter .062 [1.57]
Number of
Circuits
A
Dim.
Socket
Finish
2
.550
13.97
3
.800
20.32
4
1.050
26.67
5
1.300
33.02
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Socket Header Part Numbers
Standard
Standard Tail
Long Tail3
Polarized2
Tail2
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 189-190
Recommended PC Board Hole
Layout— page 199
Technical Documents— pages 189
and 205-206
Mating Connectors
350824-1
350824-4
350825-1
350825-4
350826-1
350826-4
640901-1
640901-3
643412-1
643412-3
643414-1
643414-3
643416-1
—
—
—
350831-1
—
350832-1
350832-4
350833-1
350833-4
—
—
Mates with Plug
Housing Part Number
(Using Pin Contacts)
Universal
Universal
MATE-N-LOK II MATE-N-LOK
770017-1
350777-1
770018-1
350766-1
770019-1
350779-1
770016-1
350809-1
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
2Use Standard Tail for .062 [1.57] thick PC Board.
3Use Long Tail for .125 [3.18] thick PC Board.
Universal MATE-N-LOK II
Plug Housings — pages 193-194
Universal MATE-N-LOK
Plug Housings — page 175
Standard Density
6, 9, 12 and 15
Circuit, Matrix
Polarizing
feature
Universal MATE-N-LOK Headers
.250 [6.35] Centerline
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
Number of
Circuits
A
Dim.
Socket
Finish
6
.550
13.97
9
.800
20.32
12
1.050
26.67
15
1.300
33.02
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
.550
[13.97]
.800
[20.32]
Socket Header Part Numbers
Standard
Standard Tail
Long Tail3
Polarized2
Tail2
350827-1
350827-4
350828-1
350828-4
350829-1
350829-4
350830-1
350830-4
643424-1
643424-3
643426-1
643426-3
643428-1
—
643430-1
—
350834-1
350834-4
350835-1
350835-4
350836-1
350836-4
350837-1
350837-4
Mates with Plug
Housing Part Number
(Using Pin Contacts)
Universal
Universal
MATE-N-LOK II MATE-N-LOK
770020-1
350715-1
770021-1
350720-1
770022-1
350735-1
770023-1
350736-1
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
Standard Tail for .062 [1.57] thick PC Board.
3Use Long Tail for .125 [3.18] thick PC Board.
2Use
Note: All part numbers are RoHS Compliant.
198
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Headers for UMNL II Connectors (Continued)
Recommended
PC Board
Hole Layouts
for Pin and Socket
Vertical Headers
2, 3, 4 and 5
Circuit, In-Line
.250
Typ.
[6.35]
.070
Dia. Typ.
[1.78]
.175
[4.45]
Polarizing Hole
See Note
No. 1 Position
2 Circuit
Related Product Data
3 Circuit
4 Circuit
Vertical Headers — pages 197-198
5 Circuit
6, 9, 12 and 15
Circuit, Matrix
Polarizing Hole
See Note
Polarizing Hole
See Note
.175
[4.45]
.250
Typ.
[6.35]
.250
Typ.
[6.35]
.175
[4.45]
No. 2 Circuit
No. 2 Circuit
.250
Typ.
[6.35]
.250
Typ.
[6.35]
No. 1 Circuit
No. 1 Circuit
.070 Dia. Typ.
[1.78]
.070 Dia. Typ.
[1.78]
.250
Typ.
[6.35]
.250
Typ.
[6.35]
.175
[4.45]
.175
[4.45]
Polarizing Hole
See Note
Polarizing Hole
See Note
250
Typ.
.35]
No. 2 Circuit
No. 2 Circuit
.250
Typ.
[6.35]
No. 1 Circuit
.070
Dia. Typ.
[1.78]
No. 1 Circuit
.070
Dia. Typ.
[1.78]
Note: Polarizing hole .070 [1.78] Dia. required for polarized headers only.
PC Board Vertical
Pin Headers with
ACTION PIN Contacts
.250
[6.35]
A
Material and Finish
.299
[7.59]
Flammability Rating — UL94V-0
.200 ± .004 Typ.
[5.08 ± 0.10]
Contacts — Copper alloy, plated with
tin over nickel on entire contact
Number of
Circuits
2
Product Specification
108-5222 ACTION PIN Universal
MATE-N-LOK Header
Assembly
3
4
Mates with Plug Housing
Part Number (Using Socket Contacts)
Universal
Universal
MATE-N-LOK II
MATE-N-LOK
Part Number
.750
19.05
1.000
25.40
1.250
31.75
173924-1*
770017-1
350777-1
173925-1*
770018-1
350766-1
173926-1*
770019-1
350779-1
Universal MATE-N-LOK Headers
.250 [6.35] Centerline
Performance Characteristics—
pages 189-190
Technical Documents— pages 189
and 205-206
.630
Max.
[16.00]
A Dim.
Related Product Data
Standard Density
Housing — PBT, black
*Install in PC Board with arbor tool.
Note: All part numbers are RoHS Compliant.
.062 Ref.
[1.57]
4 Circuit
3 Circuit
Mating Connectors
Universal MATE-N-LOK II
Plug Housings — pages 193-194
Universal MATE-N-LOK
Plug Housings — page 175
2 Circuit
.100 ± .004
[2.54 ± 0.10]
Dia. After
Reflow
.032 ± .002
[0.81 ± 0.05]
.200 ± .004
[5.08 ± 0.10]
Recommended PC Board Hole Layout
.001-.003
[0.03-0.08]
.038 ± .001
[0.97 ± 0.03 ]
.0003-.0012
[0.01-0.03]
PC Board Hole Dimensions
199
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Headers for UMNL II Connectors (Continued)
PC Board Right-Angle
Pin and Socket Headers
2, 3, 4 and 5 Circuit, In-line
.505
[12.83]
.250 [6.35] Centerline spacing
.060 Dia. Typ.
[1.52]
.150
Dia.
[3.81]
2 Places
.680
[17.27]
Material
Housing — Nylon
Flammability Rating — UL 94V-0
Contacts — Phosphor bronze
Solder tail width .052 [1.32]
No. 1 Circuit
.290
[7.37]
.250
Typ.
[6.35]
.250
[6.35]
Typ.
.100
[2.54]
Use 6-32 UNC Pan Head Screw
3/8 [9.53] long for mounting
(Not Supplied)
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 189-190
Technical Documents— pages 189
and 205-206
.360
[9.14]
.160
[4.06]
A
Dimensions
B
C
2
.550
13.97
1.245
31.62
.830
21.08
Universal MATE-N-LOK II
Plug Housings — pages 193-194
3
.800
20.32
1.495
37.97
1.080
27.43
Universal MATE-N-LOK
Plug Housings — page 175
4
1.050
26.67
1.745
44.32
1.330
33.78
5
1.300
33.02
1.995
50.67
1.580
40.13
Number of
Circuits
Mating Connectors
Recommended PC Board Hole Layout
.062 [1.57] Board Thickness
Contact
Finish
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Pre-tin
Duplex1
Part Numbers
Right-Angle Header
Mates with Plug Housing
Universal
Universal
Pin
Socket
MATE-N-LOK II MATE-N-LOK
1-350942-0
643226-1
770017-1
350777-1
3-350942-0
—
1-350943-0
643228-1
770018-1
350766-1
3-350943-0 3-643228-0
1-350944-0
643230-1
770019-1
350779-1
3-350944-0 3-643230-0
1-350945-0
643232-1
770016-1
350809-1
3-350945-0 3-643232-0
1Duplex
Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
Universal MATE-N-LOK Headers
.250 [6.35] Centerline
Standard Density
Note: All part numbers are RoHS Compliant.
200
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Headers for UMNL II Connectors (Continued)
High Current Contacts
The Louvertac bands have the versatility
of being designed into contact dimensions used in existing AMP connectors.
Plug
Part No. 770020-1
Universal MATE-N-LOK II High Current
contacts have been designed to fit into
an existing Universal MATE-N-LOK II
housing. An initial T-Rise test of a
fully energized 4 circuit connector with
10 gage wires has shown a 31 amp
capability per line with a 30° T-rise.
Cap
Part No. 770027-1
Cable-to-Cable
Material
Contacts
Body — Copper Alloy
Louvertac Band — Beryllium Copper
Finish — Silver
Contact Extraction Tool No. 318851-1
Latch Disengaging Tool No. 58382-1
Contact Part Numbers
Pin
Socket
Wire Size
AWG
10
193796-1
193797-1
12-14
193841-1
193842-1
Crimp Tools
Daniels
Hand Tool #M310 or AMP P/N 356114-1
Positioner #TP1013 or AMP P/N 356337-1
Note: High Current contacts are not intermateable with any other Universal MATE-N-LOK contact.
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Standard
MATE-N-LOK II Pin
Connector Housings
R
■
■
Certified by Canadian
Standards
Association,
File No. LR7189
Standard
MATE-N-LOK II
Socket
2
3
4
5
6
9
12
15
R
Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
Kit Part Numbers
Plug
Cap
No. of
CircuIts
High Current Socket
Part No. 193797-1
770017-1
770018-1
770019-1
770016-1
770020-1
770021-1
770022-1
770023-1
770024-1
770025-1
770026-1
—
770027-1
770028-1
770029-1
770030-1
Design Objective —108-1583
Standard Density
Application Specification—
114-16021
High Current Pin
Part No. 193796-1
Cable-to-Right-Angle Board
Right-Angle Receptacle
Part No. 193839-3
Material
■
Plug
Part No. 770019-1
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Connector Housings
No. of
CircuIts
R
■
■
Certified by Canadian
Standards
Association,
File No. LR7189
2
3
4
5
R
Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
Design Objective —108-1594
Universal MATE-N-LOK Headers
.250 [6.35] Centerline
Housing — UL 94V-0 Nylon
Contact Body — Copper Alloy
Louvertac Band — Beryllium Copper
Finish — Silver
Socket Header
193839-1
193839-2
193839-3
193839-4
Part Numbers
Mates with Plug Housing
770017-1
770018-1
770019-1
770016-1
Notes: 1. High Current contacts with Louvertac bands are not intermateable with any other contact.
2. Additional information on connectors is available in AMP High Current Products Catalog 65141.
3. Additional information on contacts is available in AMP Precision Pin and Socket Contacts
Catalog 65910.
Note: All part numbers are RoHS Compliant.
201
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Universal MATE-N-LOK Headers for UMNL II Connectors (Continued)
High Current
Vertical Pin Headers
.35
[8.89]
High Current Universal MATE-N-LOK II
Vertical Pin Headers are designed to
accept Universal MATE-N-LOK II Plugs
with High Current Socket contacts. All
housings are polarized in order to allow
proper circuit board placement. Eight
versions are available from 2 circuit to
15 circuits.
.250
Typ.
[6.35]
.250
Typ.
[6.35]
.55
[13.97]
.03
[.76]
.03
[.76]
.17
[4.32]
2 Circuit
Part No. 194009-1
Housing — UL 94V-0 Nylon
Contacts — Copper Alloy
Finish — Silver
.30
[7.62]
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
.55
[13.97]
.80
[20.32]
.55
[13.97]
Material
■
.55
[13.97]
.55
[13.97]
.17
[4.32]
6 Circuit
Part No. 194002-1
.80
[20.32]
.55
[13.97]
.25
Typ.
[6.35]
.80
[20.32]
.25
Typ.
[6.35]
.80
[20.32]
R
■
■
.03
[.76]
Certified by Canadian
Standards
Association,
File No. LR7189
R
.03
[.76]
.17
[4.32]
3 Circuit
Part No. 194017-1
Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
.30
[7.62]
.55
[13.97]
.17
[4.32]
9 Circuit
Part No. 194012-1
.80
[20.32]
.55
[13.97]
.25
Typ.
[6.35]
.25
Typ.
[6.35]
Design Objective —108-1594
Standard Density
1.05
[26.67]
1.05
[26.67]
.03
[.76]
.03
[.76]
.17
[4.32]
4 Circuit
Part No. 194010-1
Universal MATE-N-LOK Headers
.250 [6.35] Centerline
.30
[7.62]
.55
[13.97]
.17
[4.32]
12 Circuit
Part No. 194014-1
.80
[20.32]
.55
[13.97]
.25
Typ.
[6.35]
.25
Typ.
[6.35]
1.30
[33.02]
1.30
[33.02]
.03
[.76]
.03
[.76]
.17
[4.32]
5 Circuit
Part No. 194018-1
.17
[4.32]
15 Circuit
Part No. 194013-1
Notes: 1. High Current contacts with Louvertac bands are not intermateable with any other contact.
2. Additional information on connectors is available in AMP High Current Products Catalog 65141.
202
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.156 MATE-N-LOK Connectors
Product Facts
■
Positive polarized nylon
housings
■
Panel mount or free-hanging
■
Numbered cavities for easy
circuit identification
■
Removable, crimp snap-in
contacts
■
Contacts accept 20-10 AWG
wire sizes
■
Pin contacts are used in cap
housings, socket contacts
are used in plug housings
■
Not for interrupting current
■
Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
R
■
Certified by Canadian
Standards Association File
No. LR7189
.925
[2.35]
Pin diameter .156 [3.96]
Pin
Socket
Used in Caps
Used in Plugs
Contact Part Number
Pin
Socket
Strip Form
Loose Piece
Strip Form
Loose Piece
Wire Size
Range
AWG [mm2]
Ins. Dia.
Range
20-14
[.5-2.0]
.125 max.
61086-1
61251-1
61085-1
61250-1
12-10
[3.0-6.0]
.185 max.
61234-1
61253-1
61233-1
61252-1
Material and Finish
Contacts—
Brass, Pre-tin plated
Stock thickness .018 [.457]
1To
HDM1
Applicator
Part No.
466462-1
466462-2
466462-3
687765-2
687765-3
Standard Density
Contacts
.760
[1.93]
Hand Tool
Part No.
58631-1
58632-1
be used with appropriate application machine. See pages 201-204 for further information.
Note: All part numbers are RoHS Compliant.
.156 MATE-N-LOK Connectors
.390 [9.91] Centerline
Insertion Tool
Part No. 91002-1
(IS 408-7347)
Extraction Tool
Part No. 691458-1 (Pins)
Part No. 691458-2 (Sockets)
(IS 408-4322)
203
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
.156 MATE-N-LOK Connectors (Continued)
Housings
1.220
[30.99]
Free-Hanging or Panel Mount
1.220
[30.99]
Related Product Data
Contacts—page 203
Product Specification
108-8002
Application Specification
114-1109
A
A
.390
[9.91]
.390
[9.91]
.430
[10.92]
.430
[10.92]
Pin Housing (Cap)
Free-Hanging
Part Number 794117-1
Material
Pin Housing (Cap)
Panel Mount
Part Number 794118-1
Housings—
Nylon, Natural Color
Flammability Rating—UL94V-2
.180
[4.57]
A
.390
[9.91]
.460
[11.68]
1.020
[25.91]
Socket Housing (Plug)
Part Number 794116-1
.450
.370
[9.40] [11.43]
Ref.
1.91
[48.51]
Ref.
R .225
[5.72]
4 Plc.
.430
[10.92]
1.17
[29.72]
.480
[12.19]
.210
[5.33]
Panel Mount Cutout
Note: Panel must be punched in the same
direction as the housing will be inserted.
Number of
Circuits
A
Dim.
Plug
3
.048
1.210
.063
1.590
4
Cap
Free-Hanging
Panel Mount
794412-1
794413-1
—
794116-1
794117-1
794118-1
.156 MATE-N-LOK Connectors
.390 [9.91] Centerline
Standard Density
Note: All part numbers are RoHS Compliant.
204
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Technical Documents
Related Product Data
Connectors
2.5 mm Signal Double Lock (SDL)—
pages 9-16
Grace Inertia Connectors
(GIC) 3.5—pages 49-52
.062 Commercial Pin and
Socket—pages 53-57
Power Double Lock (PDL)—
pages 59-81
Mini Universal MATE-N-LOK—
pages 83-94
Mini Universal MATE-N-LOK 2—
pages 99-107
(MR) Miniature Rectangular—
pages 109-118
VAL-U-LOK Connector System—
pages 119-124
AMP-DUAC—pages 125-133
5.0 mm Power Key Connectors
(PKC)—pages 135-141
.093 Commercial Pin and
Socket—pages 143-149
Commercial MATE-N-LOK—
pages 151-162
.140 MATE-N-LOK—pages 165-167
Universal MATE-N-LOK—
pages 169-188
Universal MATE-N-LOK II—
pages 189-195
.156 MATE-N-LOK—pages 203-204
Technical Documents
Micro MATE-N-LOK 3 mm—
pages 17-47
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineer.
108-1000
Commercial MATE-N-LOK Connectors
108-1022
(MR) Miniature Rectangular Connectors
108-1031
Universal MATE-N-LOK Connectors
108-1031-1
Splash Proof Seal, Universal MATE-N-LOK Connectors
108-1032
.140 Diameter MATE-N-LOK Pin and Socket Connectors
108-1037
.062 Commercial Pin and Socket Connectors
108-1037-1
.062 Commercial Pin and Socket Contacts
108-1038
.093 Commercial Pin and Socket Connector
108-1053
Universal MATE-N-LOK Printed Circuit Board Headers
108-1077
Commercial MATE-N-LOK Printed Circuit Board Headers
108-1078
(MR) Miniature Rectangular Printed Circuit Board Headers
108-1090
Universal MATE-N-LOK II Connectors
108-1542
Mini-Universal MATE-N-LOK Connectors
108-1542-2
Splash Proof Seals for Mini-Universal MATE-N-LOK Connectors
108-1543
Mini-Universal MATE-N-LOK Headers
108-1594
Universal MATE-N-LOK Headers with High Current Contacts
108-1693
Mini-Universal MATE-N-LOK II Connectors
108-1694
Mini-Universal MATE-N-LOK II Headers
108-1699
AMP-DUAC Headers
108-1836
Micro MATE-N-LOK 3 mm Connectors
108-2069
Universal MATE-N-LOK Circular Connector
108-5138
Mini-Universal MATE-N-LOK Connectors (UL 94V-0)
108-5151
Mini-Universal MATE-N-LOK Connectors (UL 94V-2)
108-5155
Commercial MATE-N-LOK Pin Header Assembly
108-5222
Universal MATE-N-LOK Headers with ACTION PIN Contacts
108-5410
Power Double Lock (PDL) Connectors
108-5439
Power Double Lock (PDL) Connectors (SMT)
108-5459
2.5 mm Signal Double Lock (SDL) Connectors
108-5699
5.0 mm Power Key Connectors (PKC)
108-5810
Grace Inertia Connectors (GIC) 3.5
108-8002
.156 Diameter MATE-N-LOK Connectors
108-19099
AMP-DUAC Receptacles
108-49000
Commercial MATE-N-LOK IDC Insulation Displacement Connectors
Application Specifications describe requirements for using the product in its intended application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-1007
.140 Diameter MATE-N-LOK Contacts
114-1010
Universal MATE-N-LOK Connectors
114-1012
Commercial MATE-N-LOK Contacts
114-1013
.062 Commercial Pin and Socket Connectors
114-1014
(MR) Miniature Rectangular Contacts
114-1043
Universal MATE-N-LOK II Connectors (housings, contacts and strain reliefs)
114-1109
.156 Diameter MATE-N-LOK Connectors
114-1111
Mini-Universal MATE-N-LOK 2 Connectors
114-5175
Power Double Lock (PDL) Connectors
114-5203
2.5 mm Signal Double Lock (SDL) Connectors
114-5292
5.0 mm Power Key Connectors (PKC)
114-5306
Grace Inertia Connectors (GIC) 3.5
114-6067
AMP-DUAC Crimping Contacts
114-13000
Micro MATE-N-LOK 3 mm Connectors
205
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Technical Documents (Continued)
Application Specifications (Continued)
Technical Documents
114-13089
114-16017
114-19048
114-49000
114-49001
Mini-Universal MATE-N-LOK Sealed Connectors
Mini-Universal MATE-N-LOK Connectors
AMP-DUAC Receptacles (Use of)
.093 Commercial Pin and Socket Connectors
Commercial MATE-N-LOK IDC Insulation Displacement Connectors
Instruction Sheets provide instructions for assembling or applying the product. They are intended for the Manufacturing Assembler or Operator.
408-3186
Terminating Head (PN 231894-1) (Commercial MATE-N-LOK IDC Connector)
408-3200
Universal MATE-N-LOK II Connectors (Housings, Contacts and Accessories)
408-3231
(MR) Miniature Rectangular Connectors (Pin Housing, Socket Housing,
Contacts, and Accessories)
408-3234
Mini-Universal MATE-N-LOK Connectors
408-3320
Universal MATE-N-LOK Strain Relief Assembly and Keying Plug
408-3392
Universal MATE-N-LOK Splash Proof Seals
408-3393
Mini-Universal MATE-N-LOK 2 Connectors
408-4118
Contact Extraction Tool (PN 189727-1)
408-4322
Contact Extraction Tools [PN 691458-1 (Pins) and 691458-2 (Sockets)]
408-4370
Contact Extraction Tool (PN 318831-1)
408-4371
Contact Extraction Tool (PN 318851-1)
408-4375
Contact Extraction Tool (PN 318837-1)
408-4378
Extraction Tool (PN 318845-1)
408-6790
Hand Tool Handle (PN 58074-1)
408-7158
Contact Extraction Tools [PN 1-305183-1 (Pins) and 1-305183-2 (Sockets)]
408-7166
Commercial MATE-N-LOK Panel Mount Connector
408-7200
Commercial MATE-N-LOK Free-Hanging Connector
408-7201
Commercial MATE-N-LOK Detent Engagement Connectors, 2 and 3 circuit
408-7209
Commercial MATE-N-LOK Commoning Tabs
408-7211
Pin and Socket Extraction Tool (PN 465644-1)
408-7215
Commercial MATE-N-LOK Single Circuit Connector
408-7300
MATE-N-LOK Contact and Housing Selection Charts
408-7347
Contact Insertion Tool (PN 91002-1)
408-7582
Commercial MATE-N-LOK Keying Plug
408-7714
Universal MATE-N-LOK Connectors
408-7763
Power Unit (PN 91112-2)
408-7984
Contact Insertion Tool (PN 455830-1)
408-9330
Head (PN 231920-2) (Used with Arbor Tool PN 91085-2)
408-9436
Latch Disengaging Tool (PN 58382-1)
408-9570
Contact Extraction Tool (PN 455822-2)
408-10003
Contact Retention Test Tool (PN 1586700-1)
408-10017
Universal MATE-N-LOK Sealed Bulkhead Connectors
411-5105
Mini-Universal MATE-N-LOK Connectors
411-5638
Power Double Lock (PDL) Connectors
206
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Application Tooling
Semiautomatic Machines
AMP-O-LECTRIC Model “G”
Terminating Machines,
354500-1, -9, -11
AMP 3K/40 and AMP 5K/40
Terminators
Specifications
Width—18.7-25.3 [475-643] depending on applicator type
Depth—21.5-28.1 [546-713] depending on applicator type
Height—20 [508]
Weight—240 lb [110 kg]
Electrical—120 or 220 VAC, 50 or 60 Hz
Air—90-110 psi [6.21-7.59 bar],
6 scfm [0.00282 m3/s] when required
with air-feed applicators
Wire Range—26-10 AWG [0.12-6
mm2] solid or stranded, depending on
product applied
For more information, request Catalog
65828, Catalog 82275 [Crimp
Quality Monitor (CQM)].
AMP-O-MATIC
Stripper-Crimper Machine,
854040-3, -4
Semiautomatic bench crimping
machines that also strip the
wire, and are therefore used for
terminating jacketed cable.
Feature manual precision
adjustment of crimp height,
keyed strip blades for faster,
more accurate setups, and an
efficient scrap removal system.
All adjustments can be made
from the front of the machines
without special tools. Available
with crimp quality monitoring.
Specifications
Width—14 [355]
Depth—18 [457]
Height—33 [838] without reel
Weight—150 lb [68 kg]
Electrical—120 VAC, 50 or 60 Hz, .5 A
Air—80-100 psi [5.52-6.90 bar], 3.5
scfm [0.00165 m3/s]
Wire Range—32-14 AWG
[0.03-2 mm2]
For more information, request Catalog
65004.
Application Tooling
Semiautomatic bench machines
for crimping reeled terminals
and contacts, featuring a quiet
and reliable direct motor drive,
microprocessor controls for
ease of setup and operation,
and guarding and lighting
designed for operator convenience and safety. All models
are equipped with either
manual or automatic precision
adjustment of crimp height.
Machine-mounted sensors are
available for crimp quality
monitoring using conventional
miniature-style applicators.
As value oriented terminators,
the AMP 3K/40 and AMP 5K/40
are designed for customers
that require the increased
output and quality of a semiautomatic machine at a competitive price. By incorporating
the most commonly requested
features as standard and
offering a long list of optional
equipment, these terminators
offer flexibility to meet the
specific needs of various
applications at the lowest
possible cost.
Optional Stripping Module for the AMP 3K/40, AMP 5K/40
and AMP-O-LECTRIC Model G Terminators
The combination of the
Stripping Module with the
AMP-O-LECTRIC Model G
Terminator or the AMP 3K/40,
5K/40 provides an economical,
proficient method of stripping
wire and crimping terminals
on the same machine. Wires
are stripped moments before
crimping, meaning there is
virtually no chance of damaging wire conductors during
handling or storage. Once the
wire is fed into the start sensor
the Stripping Module does the
rest, improving placement
accuracy.
For more information, request
Catalog 1309085.
Crimp Quality Monitor
This system measures the crimp
height of each termination as it
is made. It also evaluates the
quality of each crimp. If a crimp
is questionable, the monitor
alerts the operator with both
visual and audible alarms. It
also features ports for printing
and networking. For use with
AMP-O-LECTRIC Model “G”
and AMP-O-MATIC Stripper-
Crimper Machines, the monitor
is mounted to the machine. For
use with AMPOMATOR CLS IV+
Machines, it is integrated into
the machine’s operating system,
with the displays appearing on
the machine’s touch screen.
For more information, request Catalog
82275.
Note: This listing is for reference purposes only. To obtain part numbers for specific applications call Technical Support.
207
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Application Tooling (Continued)
Automatic Machines
System III Applicator
Application Tooling
AMPOMATOR System III
Leadmaker
The AMPOMATOR System III
Leadmaker is designed for
the demands of low-volume/
high-mix manufacturing and
precision quality. This leadmaker combines the best wire
processing capabilities with
new technologies in terminal
feeding and machine set-up
found in the System III
Applicator to offer significant
advantages for higher throughput and efficiencies.
Request Catalog 1654956-5.
AMPOMATOR CLS IV+
Lead-Making Machines,
356500-1, -2
EDGE Electronic Applicator
Counter
The System III Applicator
introduces several new
technologies into the applicator
including a precision servoelectric motorized feeding
system, a built-in data module
for storing terminal crimp and
set-up information, a precision
fit round ram, and a newly
designed terminal depressor.
It still utilizes the proven quality
of the HD-M crimper and
anvil tooling.
Fully-automatic machines
that measure, cut, strip
and terminate single leads.
Microprocessor-controlled, and
programmed and operated
using an easy-to-follow, menudriven touchscreen. Features
include direct-drive terminating
units with precision crimp height
adjustment, fully programmable
setups, wire runout and splice
detection, and motorized
pre-feed with wire straightener.
Crimp quality monitoring is
also available.
Specifications
The new, versatile EDGE applicator counter tracks wearable
tool usage for the most effective maintenance planning. The
completely electronic counter,
with clear LCD display, indicates cycles since installation.
By performing maintenance at
measured intervals with pre-set
Width—159 [4 039]
Depth—68 [1 730]
Height—90 [2 285] min., with
24 [610] dia. reel
Weight—2 000 lb [907 kg]
Electrical—220 VAC, 50 or 60 Hz,
1 ∅, 20 A with neutral and ground
Air—90 psi [6.21 bar], 15 scfm
[0.00708 m3/s] sustained
Wire Range—26-10 AWG
[0.12-6 mm2] stranded, 26-16 AWG
[0.12-1.4 mm2] solid
Lead Lengths—3-90 [76.2-2 286],
90-1 000 [2 286-25 400] with long lead
conveyors
For more information, request Catalog
124324.
limits, operators avoid breakdowns and rejects caused by
tool wear or mis-adjustment.
For more information, request Catalog
1773385.
208
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Application Tooling (Continued)
End- and Side-Feed HeavyDuty Miniature (HDM)
Applicators
Applicator Styles
■
■
■
■
■
■
■
■
■
■
■
For use with AMP-O-MATIC
Stripper-Crimper Machines
Terminate a wide variety of
open-barrel products
Quickly interchangeable to
run different products
Easily repaired
Simple dial-in settings to
handle similar products and
various wire sizes
CQM applicators are
available
Applicator and Hand Tool
Selection Guide
Density
Related Product Data
Contacts
2.5 mm Signal Double Lock (SDL)—page 12
Micro MATE-N-LOK 3 mm—page 22
Grace Inertia Connectors (GIC) 3.5—page 50
.062 Commercial Pin and Socket—page 55
Power Double Lock (PDL)—page 61
Mini Universal MATE-N-LOK—page 84
Mini Universal MATE-N-LOK 2—pages 100-101
(MR) Miniature Rectangular—page 112
VAL-U-LOK Connector System—page 120
AMP-DUAC—pages 126-127
5.0 mm Power Key Connectors (PKC)—page 137
.093 Commercial Pin and Socket—page 145
Commercial MATE-N-LOK—pages 155-156
.140 MATE-N-LOK—page 166
Universal MATE-N-LOK—pages 172-173
Universal MATE-N-LOK II—page 192
.156 MATE-N-LOK—page 203
Mechanical Hand Tools
Crimp Quality Monitor
(CQM) Applicators
■
■
■
Product Line
A
*
X
*
X
*
X
X
X
X
X
X
*
X
X
X
X
X
X
Application Tooling
Stripper-Crimper (SCA)
Applicators
Handle a wide variety of
products
Used with both semi- and
fully-automatic machines
Quickly interchangeable to
run different products
Easily repaired
Simple dial-in settings to
handle similar products
and various wire sizes
Same basic features as
regular HDM and SCA
applicators
Recommended for use
with machines featuring
manual or automatic
precision-adjust
Use two built-in sensors to
provide the Crimp Quality
Monitor with data to
measure crimp height,
and evaluate the quality of
each crimp
Applicators
B
*
X
*
X
*
X
X
X
X
X
*
X
X
X
X
X
-
C
*
X
*
X
*
X
X
X
X
*
X
X
X
X
X
-
Hand Tools
D
E
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
2.5 mm Signal Double Lock (SDL)
Micro MATE-N-LOK 3 mm
Grace Inertia Connectors (GIC) 3.5
.062 Commercial Pin and Socket
Power Double Lock (PDL)
High
Mini-Universal MATE-N-LOK
Sealed Mini-Universal MATE-N-LOK
Mini-Universal MATE-N-LOK 2
(MR) Miniature Rectangular
VAL-U-LOK Connector System
AMP-DUAC
5.0 mm Power Key Connectors (PKC)
.093 Commercial Pin and Socket
Commercial MATE-N-LOK
Standard
.140 MATE-N-LOK
Universal MATE-N-LOK
Universal MATE-N-LOK II
.156 MATE-N-LOK
A—Heavy Duty Miniature (HDM) Applicators
B—Stripper-Crimper Applicators (SCA)
C—Crimp Quality Monitor (CQM) Applicators
D—CERTI-CRIMP Hand Tool
E—PRO-CRIMPER III Commercial Hand Tool
* Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Numbers.
CERTI-CRIMP II Straight
Action Hand Tools (SAHT)
91501-1, 91502-1
Premium grade hand tools.
Feature ratchet control to
provide complete crimp
cycle. Die sets close in a
straight line. Include a contact locator and wire stop,
plus an insulation crimp
adjustment lever, when
applicable. Approximate
weight 1.3 lb [0.59 kg]
For more information, request
Catalog 65780.
Note: This listing is for reference purposes only. To obtain part numbers for specific applications call Technical Support.
209
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Application Tooling (Continued)
Hand Tools
CERTI-CRIMP II Hand Tool
PRO-CRIMPER III Hand Tool
Related Product Data
Application Tooling
Contacts
2.5 mm Signal Double Lock
(SDL)—page 12
Micro MATE-N-LOK 3 mm—page 22
Grace Inertia Connectors (GIC)
3.5—page 50
.062 Commercial Pin and
Socket—page 55
Power Double Lock (PDL)—page
61
Mini Universal MATE-N-LOK—
page 86
Mini Universal MATE-N-LOK 2—
pages 100-101
(MR) Miniature Rectangular—
page 112
VAL-U-LOK Connector System—
page 120
AMP-DUAC—pages 126-127
5.0 mm Power Key Connectors
(PKC)—page 137
.093 Commercial Pin and
Socket—page 145
Commercial MATE-N-LOK—
pages 155-156
.140 MATE-N-LOK—page 166
Universal MATE-N-LOK—
pages 172-173
Universal MATE-N-LOK II—page 192
.156 MATE-N-LOK—page 203
Catalog 65780
Features
Field Repair/Prototyping
OEM Applications/Low Volume Production
Ratchet Control
Brush/Bellmouth Control
Precision Crimp Height Control
Little/No Operator Training
Insulation Adjustment
Repairable
Density
Product Line
2.5 mm Signal Double Lock (SDL)
Micro MATE-N-LOK 3 mm
Grace Inertia Connectors (GIC) 3.5
.062 Commercial Pin & Socket
Power Double Lock (PDL)
High
Mini-Universal MATE-N-LOK
and
Sealed Mini-Universal MATE-N-LOK
Mini-Universal MATE-N-LOK 2
(MR) Miniature Rectangular
VAL-U-LOK Connector System
AMP-DUAC
5.0 mm Power Key Connectors (PKC)
.093 Commercial Pin & Socket
Commercial MATE-N-LOK
.140 MATE-N-LOK
Standard
Universal MATE-N-LOK
and
Universal MATE-N-LOK II
.156 MATE-N-LOK
Catalog 82276
CERTI-CRIMP Hand Tool
X
X
X
X
X
X
X
X
CERTI-CRIMP Hand Tool
Part Number Instruction Sheet
234603-1
411-5735
234604-1
411-5736
91501-1
408-8547
91502-1
408-8547
1596277-1
411-78101
—
—
—
—
91567-1
408-8547
91569-1
408-8547
91529-1
408-8547
91522-1
408-8547
91594-1
408-8547
90717-2
408-4443
91529-1
408-8547
91522-1
408-8547
91594-1
408-8547
90717-2
408-4443
91534-1
408-8547
91526-1
408-8547
—
—
—
—
90714-1
408-4385
734202-2
—
—
—
—
—
—
—
91515-1
408-8547
91512-1
408-8547
91504-1
408-8547
91552-1
408-8547
408-2095
69710-11
58373-12
408-9442
58374-12
408-9442
58439-1
408-9591
91510-1
408-8547
91500-1
408-8547
91508-1
408-8547
91506-1
408-8547
69710-11
408-2095
58380-12
408-9433
58380-2 2
408-9433
58631-1
408-4341
58632-1
408-4340
PRO-CRIMPER III Hand Tool
X
—
X
X
X
—
—
—
PRO-CRIMPER III Hand Tool
Part Number Instruction Sheet
—
—
—
—
—
—
—
—
—
—
90870-1
408-9965
90869-1
408-9964
—
—
—
—
90758-1
408-9938
90759-1
408-9962
90760-1
408-9963
—
—
—
—
—
—
—
—
—
—
58514-1
408-9973
58514-1
408-9973
91387-1
408-8917
91388-1
408-8918
—
—
—
—
—
—
90872-1
408-9967
90871-1
408-9966
—
—
90574-1
408-9886
90575-1
408-9887
—
—
—
—
—
—
—
—
—
—
90548-1
408-9885
90546-1
408-9883
90547-1
408-9884
90547-1
408-9884
—
—
—
—
—
—
—
—
—
—
1Hand tool requires die set.
2Die set.
Note: This listing is for reference purposes only. To obtain part numbers for specific applications call Technical Support.
210
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Applicator Options
Strip Form Contact
Part Number
Pin
2.5 mm Signal Double
Lock (SDL) Contacts
Micro MATE-N-LOK
3 mm Connector
System
.062 Commercial Pin
and Socket Contacts
Power Double Lock
(PDL)
Mini-Universal
MATE-N-LOK
Contacts
Mini-Universal
MATE-N-LOK 2
Contacts
(MR) Miniature
Rectangular
Contacts
917683-1
917684-1
1-794608-0
1-794608-1
1-794608-2
1-794609-0
1-794609-1
1-794609-2
—
—
—
—
—
—
1565080-1
1612335-1
—
—
—
—
—
—
794606-1
1-794606-1
1-794606-2
794607-1
1-794607-1
1-794607-2
1565079-1
1612334-1
1385194-2
1385194-3
1385194-1
—
1385377-2
1385377-3
1385377-1
—
680893-2
680893-3
680893-1
—
680894-2
680894-3
680894-1
—
*
*
*
*
*
*
*
*
466686-3
466686-1
466955-1
687996-3
687996-1
—
*
*
*
*
*
*
*
*
*
*
*
*
567418-2
567418-3
567418-1
—
567066-4
567066-5
567066-3
466990-2
567067-2
567067-3
567067-1
466986-1
680582
567251-1
680582
567902-1
567418-2
567418-3
567418-1
—
567066-4
567066-5
567066-3
466990-2
680854-2
680854-3
680854-1
466986-1
680582-2
680582-3
—
567902-1
466352-2
466352-3
466352-1
—
466351-2
466351-4
466351-1
466913-1
466351-2
466351-4
466351-1
466913-1
640391-1
640391-5
—
—
350629-1
—
350629-5
—
—
640392-1
640392-5
466686-2
640392-2
794046-1
350628-1
350628-2
350628-5
687996-2
350628-6
794103-1
177914-1
*
177916-1
177914-2†
*
177915-1
*
177917-1
177915-2†
*
† High contact pressure type.
770835-1
1-770835-0
770901-1
1-770901-0
770903-1
1-770903-0
171636-1
—
770834-1
1-770834-0
770902-1
1-770902-0
770904-1
1-770904-0
171637-1
171637-3
794216-1
1-794216-0
794218-1
1-794218-0
794220-1
1-794220-0
794222-1
1-794222-0
794217-1
1-794217-0
794219-1
1-794219-0
794221-1
1-794221-0
794223-1
1-794223-0
350968-1
350968-2
350967-1
350967-2
350969-1
350969-2
794000-1
794000-2
641294-1
641294-2
—
—
Applicator Options
Grace Inertia
Connectors (GIC) 3.5
Socket
917764-1
917765-1
Heavy-Duty Miniature Applicator Part Numbers
Used on Bench Top Terminators
Used on Automatic Leadmaking
Used on
Equipment (AMPOMATOR CLS
AMP-O-LECTRIC AMP-O-LECTRIC
AMP-O-MATIC
Machine
with
T
or
G
Terminators)
Stripper-Crimper
Machine
Model K Machine Model G Machine
*
*
*
*
*
*
*
*
Note: Stripper Crimper (SCA) and Crimp Quality Monitor Applicators may be available. Call Technical Support for Part Numbers.
* Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Numbers.
Note: All part numbers are RoHS Compliant.
211
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Applicator Options (Continued)
Strip Form Contact
Part Number
Applicator Options
VAL-U-LOK
Connector System
AMP-DUAC
Pin
Socket
794955-1
794955-2
794955-3
794955-4
794957-1
794957-2
794957-3
794957-4
794576-1
—
—
794956-1
794956-2
794956-3
794956-4
794958-1
794958-2
794958-3
794958-4
106529-2
1-794138-3
106528-2
1-794139-3
1-794140-3
794418-1
1376347-1
1376348-1
350418-1
—
350418-5
350416-1
350416-5
770530-1
770385-1
—
350079-1
350079-4
350079-5
61116-1
61116-4
61116-5
61116-6
61116-7
61118-1
61118-4
61118-5
61118-6
61118-7
350558-1
350558-4
61527-2
350417-1
350417-3
350417-5
350415-1
350415-5
770529-1
770383-1
—
350078-1
350078-4
350078-5
61314-1
61314-4
61314-5
61314-6
61314-7
61117-1
61117-4
61117-5
61117-6
61117-7
350557-1
350557-4
—
61627-1
61627-2
350201-1
350201-2
350924-1
350924-6
350561-1
—
350561-2
—
350561-7
—
350561-3
—
61626-1
61626-2
350200-1
350200-2
350925-1
350925-6
350851-1
350570-1
350851-2
350570-2
350851-7
350570-7
350570-3
350570-6
794578-1
—
5.0 mm Power Key
Connectors (PKC)
.093 Commercial Pin
and Socket Contacts
Commercial
MATE-N-LOK
Contacts
.140 MATE-N-LOK
Contacts
Universal
MATE-N-LOK
Contacts
Heavy-Duty Miniature Applicator Part Numbers
Used on Bench Top Terminators
Used on Automatic Leadmaking
Used on
Equipment (AMPOMATOR CLS
AMP-O-LECTRIC AMP-O-LECTRIC
AMP-O-MATIC
Model K Machine Model G Machine Machine with T or G Terminators) Stripper-Crimper Machine
1385817-2
1385817-3
1385817-1
—
1385448-2
1385448-3
1385448-1
—
680308-2
680308-3
—
567959-1
680307-2
680307-3
—
567960-1
680350-2
680350-3
—
—
*
*
*
*
*
*
*
*
466656-2
466656-3
466656-1
466922-1
466878-2
466878-3
466878-1
466959-1
567337-4
567337-6
567337-3
—
567273-2
567273-4
567273-3
—
466426-2
466426-3
466426-1
—
466320-2
466320-4
466320-1
466917-1
687763-2
687763-6
687763-1
466920-1
687898-2
687898-4
687898-1
—
466320-2
466320-4
466320-1
466917-1
567306-2
567306-3
567306-1
—
567309-2
567309-3
587309-1
—
466616-2
466616-3
—
—
466320-2
466320-4
466320-1
466917-1
Note: Stripper Crimper (SCA) and Crimp Quality Monitor Applicators may be available. Call Technical Support for Part Numbers.
* Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Numbers.
Note: All part numbers are RoHS Compliant.
212
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Applicator Options (Continued)
Strip Form Contact
Part Number
Universal
MATE-N-LOK
Contacts (Continued)
.156 MATE-N-LOK
Contacts
Socket
350536-1
350536-2
350536-7
350536-3
350536-6
350537-1
350537-2
350537-7
350537-3
350537-6
350874-1
350874-3
350923-3
350923-6
350923-4
—
—
—
—
—
—
—
—
—
—
—
—
770012-6
—
—
770010-3
1-770010-0
—
—
770008-3
1-770008-0
—
—
770006-3
1-770006-0
770004-3
1-770004-0
—
—
—
—
61086-1
61234-1
61085-1
61233-1
687763-2
687763-6
687763-1
466920-1
687926-2
687926-6
687926-1
466989-1
466588-2
466588-3
466588-1
—
466597-2
466597-3
466597-1
—
466320-2
466320-4
466320-1
466917-1
687763-2
687763-6
687763-1
466920-1
687926-2
687926-6
687926-1
466989-1
567216-2
687763-2
466597-2
—
567216-3
687763-6
466597-3
567252-4
567216-1
687763-1
466597-1
567252-1
—
567214-4
567214-1
567914-1
—
567213-4
567213-1
567913-1
—
567212-4
567212-1
—
—
567211-4
567211-1
—
—
567213-4
567213-1
567913-1
—
567212-4
567212-1
—
466462-1
687765-2
466462-3
687765-2
466462-1
—
—
—
Applicator Options
Universal
MATE-N-LOK II
Contacts
Pin
350218-1
350218-2
350218-7
350218-3
350218-6
350538-1
350538-2
350538-7
350538-3
350538-6
350873-1
350873-3
350922-3
350922-6
350922-4
350699-1
350699-2
350699-7
350687-1
350687-2
350687-7
350700-1
350700-2
350700-7
770210-1
350654-1
770234-3
770011-6
770009-1
1-770009-0
—
—
770007-1
1-770007-0
—
—
770005-1
1-770005-0
—
1-770005-1
770003-3
1-770003-0
770193-1
1-770193-0
770194-1
1-770194-0
Heavy-Duty Miniature Applicator Part Numbers
Used on Bench Top Terminators
Used on Automatic Leadmaking
Used on
Equipment (AMPOMATOR CLS
AMP-O-LECTRIC AMP-O-LECTRIC
AMP-O-MATIC
Model K Machine Model G Machine Machine with T or G Terminators) Stripper-Crimper Machine
466920-1
—
Note: Stripper Crimper (SCA) and Crimp Quality Monitor Applicators may be available. Call Technical Support for Part Numbers.
* Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Numbers.
Note: All part numbers are RoHS Compliant.
213
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Product Feature Comparisons
High Density
2.5 mm
Signal
Double
Lock (SDL)
Micro
MATE-N-LOK
3 mm
Grace
Inertia
Connectors
(GIC) 3.5
.062
Commercial
Pin &
Socket
Power
Double
Lock
(PDL)
20
26
20
30
18
26
18
30
16
26
Product Feature Comparisons
Wire AWG —
Maximum
Minimum
Current Rating —
10 AWG Wire
14 AWG Wire
16 AWG Wire
18 AWG Wire
20 AWG Wire
Max. Operating Voltage
(AC or DC)
Flammability Rating —
UL 94V-0
UL 94V-2
Approvals —
UL
CSA
VDE
Contact Material —
Brass
Phos. Bronze
Plating Finish —
Tin Plating
Gold Plating
—
—
—
—
3
—
**
—
—
—
7
—
—
17
Sealed
MiniMiniUniversal
Universal
MATE-N-LOK MATE-N-LOK
—
—
14
—
—
MiniUniversal
MATE-N-LOK 2
(MR)
Miniature
Rectangular
VAL-U-LOK
Connector
System
AMPDUAC
18
26
18
26
—
—
—
9
—
—
—
—
9
—
16
30
18
26
16
30
18
26
—
—
—
—
9
9
10.5
6
50
250
300
250
300
600
600
600
250
600
600
Yes
No
Yes
No
Yes
No
No
Yes
Yes
No
Yes
Yes*
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Submitted
Submitted
Submitted
Yes
Yes
No
Yes
Yes
—
Yes
Yes
No
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
—
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
.098
[2.50]
.118
[3.00]
.137
[3.50]
.163
[4.14]
.163
[4.14]
.163
[4.14]
.165
[4.20]
.165
[4.20]
.165
[4.20]
No
Yes
Yes
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
No
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
No
No
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
Yes
No
No
No
No
No
Yes
No
No
Yes
Yes
Yes
No
Yes
Yes
No
Yes
No
Yes
Yes
No
No
No
No
Yes
No
No
Vertical
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Blindmate
No
No
No
No
No
Yes
Yes
No
Yes
No
Right-Angle
Planned
Yes
No
No
No
Yes
Yes
Mini-Universal
MATE-N-LOK
Mini-Universal
MATE-N-LOK
Mini-Universal
MATE-N-LOK
No
Yes
Yes
Positions —
Minimum
Maximum
2
13
2
24
2
6
1
9
1
12
1
24
2
10
2
24
2
36
2
24
2
24
Centerline Spacing —
Housings —
Panel Mount
Free-Hanging
Secondary Locking Latches
Contact Position Control
In-Line Config.
Dual Row Config.
Matrix Config.
Accessories —
Strain Relief
Keying Plug
Seals
Headers —
Yes
No
.156 [3.96]
.145
256 [6.50]
[3.68] .312 [7.92]
.512 [13.00]
* Wire-to-Wire Only.
** 5 A on 20 AWG*
214
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Product Feature Comparisons (Continued)
Standard Density
5.0 mm
Power Key
Connectors (PKC)
Centerline Spacing —
Commercial
MATE-N-LOK
.140
MATE-N-LOK
Universal
MATE-N-LOK
Universal
MATE-N-LOK II
.156
MATE-N-LOK
14
24
14
30
10
20
10
30
10
30
10
20
19
13
15
19
16
24
—
—
10
—
—
300
—
—
250
28
—
—
—
—
600
600
600
32.5
—
—
—
—
600
—
—
250
Yes
No
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Yes
.198 [5.03]
.250 [6.35]
.248 [6.30]
Yes
Yes
Yes
Yes
Yes
No
.250 [6.35]
.250 [6.35]
.390 [9.91]
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
No
No
.197 [5.00]
Yes
Yes
Yes
No
.200 [5.08]
.240 [6.10] x .202 [5.13] .240 [6.10]
.195 [4.95] x .360 [9.14]
Housings —
Panel Mount
Free-Hanging
Secondary Locking Latches
Contact Position Control
In-Line Config.
Dual Row Config.
Matrix Config.
Accessories —
No
No
Yes
No
Yes
Yes
No
Yes
Yes
No
No
Yes
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
No
No
Yes
No
Yes
Strain Relief
Yes
No
No
No
Yes
Keying Plug
Seals
Headers —
No
No
No
No
Yes
No
No
No
Yes
Yes
Vertical
Yes
No
Yes
No
Yes
Blindmate
No
No
No
No
No
Right-Angle
No
No
Yes
No
Yes
Universal
MATE-N-LOK
No
Universal
MATE-N-LOK
Positions —
Minimum
Maximum
2
6
1
15
1
16
2
9
1
15
2
15
Universal
MATE-N-LOK
Yes
No
Product Feature Comparisons
Wire AWG—
Maximum
Minimum
Current Rating —
10 AWG Wire
14 AWG Wire
16 AWG Wire
18 AWG Wire
20 AWG Wire
Max. Operating Voltage (AC or DC)
Flammability Rating —
UL 94V-0
UL 94V-2
Approvals —
UL
CSA
VDE
Contact Material —
Brass
Phos. Bronze
Plating Finish —
Tin Plating
Gold Plating
.093
Commercial
Pin & Socket
No
No
No
No
No
No
3
4
* Wire-to-Wire Only.
** 5 A on 20 AWG*
215
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Non-Compliant to RoHS Compliant Part Number Cross Reference
Non-Compliant to RoHS Compliant Part Number Cross Reference
Non-Compliant
Part Number
350209-2
350210-2
350211-2
350211-3
350212-2
350213-2
350214-2
350220-2
1-350375-0
1-350376-0
1-350377-0
1-350378-1
1-350379-1
1-350380-1
350424-2
350425-2
350426-2
350428-2
350429-2
350430-2
350431-2
350432-2
350433-2
350434-2
350539-2
350541-2
350543-2
350544-2
350582-2
350583-2
350584-2
350585-2
350586-2
350587-2
350588-2
350641-2
350711-2
350712-2
350713-2
350714-2
350714-3
350732-2
350737-2
350738-2
350742-2
350759-3
350760-3
350761-3
350762-3
350763-3
350764-3
350765-3
350786-2
350787-2
350789-2
350790-2
350792-2
350793-2
350824-2
350825-2
350826-2
RoHS Compliant
Part Number
1586512-2
1586514-2
1586515-2
1586515-3
1586518-2
1586520-2
1586522-2
1586524-2
2-350375-0
2-350376-0
2-350377-0
2-350378-1
2-350379-1
2-350380-1
1586525-2
1586526-2
1586528-2
350428-4
350429-4
350430-4
350431-4
350432-4
350433-4
350434-4
1586530-2
1586532-2
1586534-2
1586536-2
350582-4
350583-4
350584-4
350585-4
350586-4
350587-4
350588-4
1586539-2
350711-4
350712-4
350713-4
350714-4
350714-5
350732-4
350737-4
350738-4
350742-4
350759-5
350760-5
350761-5
350762-5
350763-5
350764-5
350765-5
350786-3
350787-3
350789-3
350790-3
350792-3
350793-3
350824-4
350825-4
350826-4
Non-Compliant
Part Number
350827-2
350828-2
350829-2
350830-2
350832-2
350833-2
350834-2
350835-2
350836-2
350837-2
2-350942-0
2-350943-0
2-350944-0
2-350945-0
350988-3
350989-3
350990-3
350991-3
1-380935-0
1-380936-0
1-380937-0
2-380991-0
2-380999-0
640466-2
640467-2
640497-2
640497-4
640498-2
640498-4
640499-2
640499-4
640500-2
640500-4
640501-2
640501-4
640502-2
640502-4
640503-2
640503-4
640504-2
640504-4
640505-2
640505-4
640506-2
640506-4
640583-2
640584-2
640900-2
640901-2
641831-2
641832-2
641963-2
641964-2
641970-2
641971-2
641972-2
641974-2
641976-2
643228-2
643230-2
643232-2
RoHS Compliant
Part Number
350827-4
350828-4
350829-4
350830-4
350832-4
350833-4
350834-4
350835-4
350836-4
350837-4
3-350942-0
3-350943-0
3-350944-0
3-350945-0
350988-5
350989-5
350990-5
350991-5
2-380935-0
2-380936-0
2-380937-0
2-1586544-0
2-1586546-0
640466-3
640467-3
2-640497-2
2-640497-4
2-640498-2
2-640498-4
2-640499-2
2-640499-4
2-640500-2
2-640500-4
2-640501-2
2-640501-4
2-640502-2
2-640502-4
2-640503-2
2-640503-4
2-640504-2
2-640504-4
2-640505-2
2-640505-4
2-640506-2
2-640506-4
640583-3
640584-3
640900-3
640901-3
641831-3
641832-3
641963-3
641964-3
641970-3
641971-3
641972-3
641974-3
641976-4
3-643228-0
3-643230-0
3-643232-0
Non-Compliant
Part Number
643234-2
643236-2
643410-2
643412-2
643414-2
643424-2
643426-2
770003-4
770004-4
770005-2
770005-4
770006-4
770007-2
770008-4
770010-4
770166-1
770166-2
770170-1
770170-2
770174-1
770174-2
770178-1
770178-2
770182-1
770182-2
770186-1
770186-2
770190-1
770190-2
770193-2
770194-2
770246-4
770247-4
770248-2
770249-4
770250-2
770251-4
770252-2
770254-2
770255-2
770262-2
770328-1
1-770328-1
770621-1
770621-2
770743-1
770743-2
770834-3
770834-6
770835-3
770858-1
770858-2
770859-1
770859-2
770872-1
770872-2
770873-1
770873-2
770874-2
770875-1
770875-2
RoHS Compliant
Part Number
3-643234-0
3-643236-0
643410-3
643412-3
643414-3
643424-3
643426-3
1-770003-0
1-770004-0
1-770005-0
1-770005-1
1-770006-0
1-770007-0
1-770008-0
1-770010-0
1-770166-0
1-770166-1
1-770170-0
1-770170-1
1-770174-0
1-770174-1
1-770178-0
1-770178-1
1-770182-0
1-770182-1
1-770186-0
1-770186-1
1-770190-0
1-770190-1
1-770193-0
1-770194-0
1-770246-0
1-770247-0
1-770248-0
1-770249-0
1-770250-0
1-770251-0
1-770252-0
1-770254-0
1-770255-0
770262-3
1586627-1
1-1586627-1
1-770621-0
1-770621-1
1-770743-0
1-770743-1
1-770834-0
1-770834-1
1-770835-0
1-770858-0
1-770858-1
1-770859-0
1-770859-1
1-770872-0
1-770872-1
1-770873-0
1-770873-1
1-770874-1
1-770875-0
1-770875-1
Non-Compliant
Part Number
770876-1
770876-2
770901-3
770902-3
770902-6
770903-3
770903-6
770904-3
770904-6
770966-1
770966-2
770967-1
770967-2
770968-1
770968-2
770969-1
770969-2
770970-1
770970-2
770971-1
770971-2
770972-1
770972-2
770973-1
770973-2
770974-1
770974-2
770985-3
770986-3
770987-3
770988-3
794040-1
794040-2
794058-3
794059-3
794065-1
794065-2
794066-1
794066-2
794067-1
794067-2
794068-1
794068-2
794069-1
794069-2
794070-1
794070-2
794071-1
794071-2
794072-1
794072-2
794073-1
794073-2
794074-1
794074-2
794075-2
794076-1
794076-2
794077-1
794077-2
794078-1
RoHS Compliant
Part Number
1-770876-0
1-770876-1
1-770901-0
1-770902-0
1-770902-1
1-770903-0
1-770903-1
1-770904-0
1-770904-1
1-770966-0
1-770966-1
1-770967-0
1-770967-1
1-770968-0
1-770968-1
1-770969-0
1-770969-1
1-770970-0
1-770970-1
1-770971-0
1-770971-1
1-770972-0
1-770972-1
1-770973-0
1-770973-1
1-770974-0
1-770974-1
1-770985-0
1-770986-0
1-770987-0
1-770988-0
1-794040-0
1-794040-1
1-794058-0
1-794059-0
1-794065-0
1-794065-1
1-794066-0
1-794066-1
1-794067-0
1-794067-1
1-794068-0
1-794068-1
1-794069-0
1-794069-1
1-794070-0
1-794070-1
1-794071-0
1-794071-1
1-794072-0
1-794072-1
1-794073-0
1-794073-1
1-794074-0
1-794074-1
1-794075-1
1-794076-0
1-794076-1
1-794077-0
1-794077-1
1-794078-0
216
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Non-Compliant to RoHS Compliant Part Number Cross Reference (Continued)
RoHS Compliant
Part Number
1-794078-1
1-794079-0
1-794079-1
1-794105-0
1-794105-1
1-794106-0
1-794106-1
1-794107-0
1-794107-1
1-794108-0
1-794108-1
1-794126-0
1-794130-1
1-794136-1
1-794137-1
1-794138-3
1-794139-3
1-794140-3
1-794141-3
1-794142-3
1-794143-3
1-794181-1
1-794181-2
1-794216-0
1-794217-0
1-794218-0
1-794219-0
1-794220-0
1-794221-0
1-794222-0
1-794223-0
1-794224-0
1-794225-0
1-794226-0
1-794227-0
1-794228-0
1-794229-0
1-794230-0
1-794231-0
1-794302-1
1-794302-2
1-794303-1
1-794303-2
1-794304-1
1-794304-2
1-794305-1
1-794305-2
1-794306-1
1-794306-2
1-794307-1
1-794307-2
1-794308-1
1-794308-2
1-794309-1
1-794309-2
1-794310-1
1-794310-2
1-794311-1
1-794311-2
1-794312-1
1-794312-2
Non-Compliant
Part Number
794313-1
794313-2
794325-1
794326-2
794327-1
794327-2
794328-1
794330-2
794349-1
794349-2
794350-1
794350-2
794351-1
794351-2
794352-1
794352-2
794353-1
794353-2
794354-1
794354-2
794355-1
794355-2
794356-1
794356-2
794357-1
794357-2
794358-1
794358-2
794359-1
794359-2
794360-1
794360-2
794374-1
794374-2
794406-3
794407-3
794415-1
794415-2
794429-1
794429-2
794448-1
794449-1
794453-1
794453-2
794454-1
794454-2
794455-1
794455-2
794466-1
794466-2
794467-1
794467-2
794468-1
794468-2
794469-1
794469-2
794470-1
794470-2
794471-1
794471-2
794472-1
RoHS Compliant
Part Number
794313-3
794313-4
1-794325-0
1-794326-1
1-794327-0
1-794327-1
1-794328-0
1-794330-1
1-794349-1
1-794349-2
1-794350-1
1-794350-2
1-794351-1
1-794351-2
1-794352-1
1-794352-2
1-794353-1
1-794353-2
1-794354-1
1-794354-2
1-794355-1
1-794355-2
1-794356-1
1-794356-2
1-794357-1
1-794357-2
1-794358-1
1-794358-2
1-794359-1
1-794359-2
1-794360-1
1-794360-2
1-794374-0
1-794374-1
1-794406-0
1-794407-0
1-794415-1
1-794415-2
1-794429-1
1-794429-2
1-794448-1
1-794449-1
1-794453-1
1-794453-2
1-794454-1
1-794454-2
1-794455-1
1-794455-2
1-794466-1
1-794466-2
1-794467-1
1-794467-2
1-794468-1
1-794468-2
1-794469-1
1-794469-2
1-794470-1
1-794470-2
1-794471-1
1-794471-2
1-794472-1
Non-Compliant
Part Number
794472-2
794484-1
794484-2
794485-1
794485-2
794486-1
794486-2
794487-1
794487-2
794488-1
794488-2
794489-1
794489-2
794490-1
794490-2
794491-1
794491-2
794492-1
794492-2
794493-1
794493-2
794494-1
794494-2
794507-1
794508-1
794509-1
794510-1
794511-1
794512-1
794513-1
794514-1
794515-1
794516-1
794526-1
794527-1
794528-1
794529-1
794530-1
794531-1
794532-1
794533-1
794534-1
794540-1
794540-2
794543-1
794543-2
794576-2
794578-2
794588-1
794589-1
794590-1
794606-2
794606-3
794607-2
794607-3
794608-1
794608-2
794608-3
794609-1
794609-2
794609-3
RoHS Compliant
Part Number
1-794472-2
1-794484-1
1-794484-2
1-794485-1
1-794485-2
1-794486-1
1-794486-2
1-794487-1
1-794487-2
1-794488-1
1-794488-2
1-794489-1
1-794489-2
1-794490-1
1-794490-2
1-794491-1
1-794491-2
1-794492-1
1-794492-2
1-794493-1
1-794493-2
1-794494-1
1-794494-2
1-794507-1
1-794508-1
1-794509-1
1-794510-1
1-794511-1
1-794512-1
1-794513-1
1-794514-1
1-794515-1
1-794516-1
1-794526-1
1-794527-1
1-794528-1
1-794529-1
1-794530-1
1-794531-1
1-794532-1
1-794533-1
1-794534-1
1-794540-1
1-794540-2
1-794543-1
1-794543-2
794576-4
794578-4
1-794588-1
1-794589-1
1-794590-1
1-794606-1
1-794606-2
1-794607-1
1-794607-2
1-794608-0
1-794608-1
1-794608-2
1-794609-0
1-794609-1
1-794609-2
Non-Compliant
Part Number
794610-2
794610-3
794611-2
794611-3
794612-1
794612-2
794612-3
794613-1
794613-2
794613-3
794618-2
794618-4
794618-6
794618-8
1-794618-0
1-794618-2
1-794618-4
1-794618-6
1-794618-8
2-794618-0
2-794618-2
2-794618-4
794619-2
794619-4
794619-6
794619-8
1-794619-0
1-794619-2
1-794619-4
1-794619-6
1-794619-8
2-794619-0
2-794619-2
2-794619-4
794620-2
794620-4
794620-6
794620-8
1-794620-0
1-794620-2
1-794620-4
1-794620-6
1-794620-8
2-794620-0
2-794620-2
2-794620-4
794621-2
794621-4
794621-6
794621-8
1-794621-0
1-794621-2
1-794621-4
1-794621-6
1-794621-8
2-794621-0
2-794621-2
2-794621-4
794622-2
794622-4
794622-6
RoHS Compliant
Part Number
1-794610-1
1-794610-2
1-794611-1
1-794611-2
1-794612-0
1-794612-1
1-794612-2
1-794613-0
1-794613-1
1-794613-2
3-794618-2
3-794618-4
3-794618-6
3-794618-8
4-794618-0
4-794618-2
4-794618-4
4-794618-6
4-794618-8
5-794618-0
5-794618-2
5-794618-4
3-794619-2
3-794619-4
3-794619-6
3-794619-8
4-794619-0
4-794619-2
4-794619-4
4-794619-6
4-794619-8
5-794619-0
5-794619-2
5-794619-4
3-794620-2
3-794620-4
3-794620-6
3-794620-8
4-794620-0
4-794620-2
4-794620-4
4-794620-6
4-794620-8
5-794620-0
5-794620-2
5-794620-4
3-794621-2
3-794621-4
3-794621-6
3-794621-8
4-794621-0
4-794621-2
4-794621-4
4-794621-6
4-794621-8
5-794621-0
5-794621-2
5-794621-4
3-794622-2
3-794622-4
3-794622-6
Non-Compliant to RoHS Compliant Part Number Cross Reference
Non-Compliant
Part Number
794078-2
794079-1
794079-2
794105-1
794105-2
794106-1
794106-2
794107-1
794107-2
794108-1
794108-2
794126-1
794130-2
794136-3
794137-3
794138-3
794139-3
794140-3
794141-3
794142-3
794143-3
794181-1
794181-2
794216-3
794217-3
794218-3
794219-3
794220-3
794221-3
794222-3
794223-3
794224-3
794225-3
794226-3
794227-3
794228-3
794229-3
794230-3
794231-3
794302-1
794302-2
794303-1
794303-2
794304-1
794304-2
794305-1
794305-2
794306-1
794306-2
794307-1
794307-2
794308-1
794308-2
794309-1
794309-2
794310-1
794310-2
794311-1
794311-2
794312-1
794312-2
217
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Non-Compliant to RoHS Compliant Part Number Cross Reference (Continued)
Non-Compliant to RoHS Compliant Part Number Cross Reference
Non-Compliant
Part Number
794622-8
1-794622-0
1-794622-2
1-794622-4
1-794622-6
1-794622-8
2-794622-0
2-794622-2
2-794622-4
794623-2
794623-4
794623-6
794623-8
1-794623-0
1-794623-2
1-794623-4
1-794623-6
1-794623-8
2-794623-0
2-794623-2
2-794623-4
794624-2
794624-4
794624-6
794624-8
1-794624-0
1-794624-2
1-794624-4
1-794624-6
1-794624-8
2-794624-0
2-794624-2
2-794624-4
794625-2
794625-4
794625-6
794625-8
1-794625-0
1-794625-2
1-794625-4
1-794625-6
1-794625-8
2-794625-0
2-794625-2
2-794625-4
794626-2
794626-4
794626-6
794626-8
1-794626-0
1-794626-2
1-794626-4
1-794626-6
1-794626-8
2-794626-0
2-794626-2
2-794626-4
794627-2
794627-4
794627-6
794627-8
RoHS Compliant
Part Number
3-794622-8
4-794622-0
4-794622-2
4-794622-4
4-794622-6
4-794622-8
5-794622-0
5-794622-2
5-794622-4
3-794623-2
3-794623-4
3-794623-6
3-794623-8
4-794623-0
4-794623-2
4-794623-4
4-794623-6
4-794623-8
5-794623-0
5-794623-2
5-794623-4
3-794624-2
3-794624-4
3-794624-6
3-794624-8
4-794624-0
4-794624-2
4-794624-4
4-794624-6
4-794624-8
5-794624-0
5-794624-2
5-794624-4
3-794625-2
3-794625-4
3-794625-6
3-794625-8
4-794625-0
4-794625-2
4-794625-4
4-794625-6
4-794625-8
5-794625-0
5-794625-2
5-794625-4
3-794626-2
3-794626-4
3-794626-6
3-794626-8
4-794626-0
4-794626-2
4-794626-4
4-794626-6
4-794626-8
5-794626-0
5-794626-2
5-794626-4
3-794627-2
3-794627-4
3-794627-6
3-794627-8
Non-Compliant
Part Number
1-794627-0
1-794627-2
1-794627-4
1-794627-6
1-794627-8
2-794627-0
2-794627-2
2-794627-4
794628-2
794628-4
794628-6
794628-8
1-794628-0
1-794628-2
1-794628-4
1-794628-6
1-794628-8
2-794628-0
2-794628-2
2-794628-4
794629-2
794629-4
794629-6
794629-8
1-794629-0
1-794629-2
1-794629-4
1-794629-6
1-794629-8
2-794629-0
2-794629-2
2-794629-4
794630-2
794630-4
794630-6
794630-8
1-794630-0
1-794630-2
1-794630-4
1-794630-6
1-794630-8
2-794630-0
2-794630-2
2-794630-4
794631-2
794631-4
794631-6
794631-8
1-794631-0
1-794631-2
1-794631-4
1-794631-6
1-794631-8
2-794631-0
2-794631-2
2-794631-4
794632-2
794632-4
794632-6
794632-8
1-794632-0
RoHS Compliant
Part Number
4-794627-0
4-794627-2
4-794627-4
4-794627-6
4-794627-8
5-794627-0
5-794627-2
5-794627-4
3-794628-2
3-794628-4
3-794628-6
3-794628-8
4-794628-0
4-794628-2
4-794628-4
4-794628-6
4-794628-8
5-794628-0
5-794628-2
5-794628-4
3-794629-2
3-794629-4
3-794629-6
3-794629-8
4-794629-0
4-794629-2
4-794629-4
4-794629-6
4-794629-8
5-794629-0
5-794629-2
5-794629-4
3-794630-2
3-794630-4
3-794630-6
3-794630-8
4-794630-0
4-794630-2
4-794630-4
4-794630-6
4-794630-8
5-794630-0
5-794630-2
5-794630-4
3-794631-2
3-794631-4
3-794631-6
3-794631-8
4-794631-0
4-794631-2
4-794631-4
4-794631-6
4-794631-8
5-794631-0
5-794631-2
5-794631-4
3-794632-2
3-794632-4
3-794632-6
3-794632-8
4-794632-0
Non-Compliant
Part Number
1-794632-2
1-794632-4
1-794632-6
1-794632-8
2-794632-0
2-794632-2
2-794632-4
794633-2
794633-4
794633-6
794633-8
1-794633-0
1-794633-2
1-794633-4
1-794633-6
1-794633-8
2-794633-0
2-794633-2
2-794633-4
794634-2
794634-4
794634-6
794634-8
1-794634-0
1-794634-2
1-794634-4
1-794634-6
1-794634-8
2-794634-0
2-794634-2
2-794634-4
794635-2
794635-4
794635-6
794635-8
1-794635-0
1-794635-2
1-794635-4
1-794635-6
1-794635-8
2-794635-0
2-794635-2
2-794635-4
794636-2
794636-4
794636-6
794636-8
1-794636-0
1-794636-2
1-794636-4
1-794636-6
1-794636-8
2-794636-0
2-794636-2
2-794636-4
794637-2
794637-4
794637-6
794637-8
1-794637-0
1-794637-2
RoHS Compliant
Part Number
4-794632-2
4-794632-4
4-794632-6
4-794632-8
5-794632-0
5-794632-2
5-794632-4
3-794633-2
3-794633-4
3-794633-6
3-794633-8
4-794633-0
4-794633-2
4-794633-4
4-794633-6
4-794633-8
5-794633-0
5-794633-2
5-794633-4
3-794634-2
3-794634-4
3-794634-6
3-794634-8
4-794634-0
4-794634-2
4-794634-4
4-794634-6
4-794634-8
5-794634-0
5-794634-2
5-794634-4
3-794635-2
3-794635-4
3-794635-6
3-794635-8
4-794635-0
4-794635-2
4-794635-4
4-794635-6
4-794635-8
5-794635-0
5-794635-2
5-794635-4
3-794636-2
3-794636-4
3-794636-6
3-794636-8
4-794636-0
4-794636-2
4-794636-4
4-794636-6
4-794636-8
5-794636-0
5-794636-2
5-794636-4
3-794637-2
3-794637-4
3-794637-6
3-794637-8
4-794637-0
4-794637-2
Non-Compliant
Part Number
1-794637-4
1-794637-6
1-794637-8
2-794637-0
2-794637-2
2-794637-4
794638-2
794638-4
794638-6
794638-8
1-794638-0
1-794638-2
1-794638-4
1-794638-6
1-794638-8
2-794638-0
2-794638-2
2-794638-4
794662-2
794662-4
794662-6
794662-8
1-794662-0
1-794662-2
1-794662-4
1-794662-6
1-794662-8
2-794662-0
2-794662-2
2-794662-4
794663-2
794663-4
794663-6
794663-8
1-794663-0
1-794663-2
1-794663-4
1-794663-6
1-794663-8
2-794663-0
2-794663-2
2-794663-4
794664-2
794664-4
794664-6
794664-8
1-794664-0
1-794664-2
1-794664-4
1-794664-6
1-794664-8
2-794664-0
2-794664-2
2-794664-4
794665-2
794665-4
794665-6
794665-8
1-794665-0
1-794665-2
1-794665-4
RoHS Compliant
Part Number
4-794637-4
4-794637-6
4-794637-8
5-794637-0
5-794637-2
5-794637-4
3-794638-2
3-794638-4
3-794638-6
3-794638-8
4-794638-0
4-794638-2
4-794638-4
4-794638-6
4-794638-8
5-794638-0
5-794638-2
5-794638-4
1586489-2
1586489-4
1586489-6
1586489-8
1-1586489-0
1-1586489-2
1-1586489-4
1-1586489-6
1-1586489-8
2-1586489-0
2-1586489-2
2-1586489-4
1586490-2
1586490-4
1586490-6
1586490-8
1-1586490-0
1-1586490-2
1-1586490-4
1-1586490-6
1-1586490-8
2-1586490-0
2-1586490-2
2-1586490-4
1586491-2
1586491-4
1586491-6
1586491-8
1-1586491-0
1-1586491-2
1-1586491-4
1-1586491-6
1-1586491-8
2-1586491-0
2-1586491-2
2-1586491-4
1586492-2
1586492-4
1586492-6
1586492-8
1-1586492-0
1-1586492-2
1-1586492-4
218
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Non-Compliant to RoHS Compliant Part Number Cross Reference (Continued)
RoHS Compliant
Part Number
1-1586492-8
2-1586492-0
2-1586492-2
2-1586492-4
1586493-2
1586493-4
1586493-6
1586493-8
1-1586493-0
1-1586493-2
1-1586493-4
1-1586493-6
1-1586493-8
2-1586493-0
2-1586493-2
2-1586493-4
1586494-2
1586494-4
1586494-6
1586494-8
1-1586494-0
1-1586494-2
1-1586494-4
1-1586494-6
1-1586494-8
2-1586494-0
2-1586494-2
2-1586494-4
1586495-2
1586495-4
1586495-6
1586495-8
1-1586495-0
1-1586495-2
1-1586495-4
1-1586495-6
1-1586495-8
2-1586495-0
2-1586495-2
2-1586495-4
1586496-2
1586496-4
1586496-6
1586496-8
1-1586496-0
1-1586496-2
1-1586496-4
1-1586496-6
1-1586496-8
2-1586496-0
2-1586496-2
2-1586496-4
3-794677-2
3-794677-4
3-794677-6
3-794677-8
4-794677-0
4-794677-2
4-794677-4
4-794677-6
4-794677-8
Non-Compliant
Part Number
2-794677-0
2-794677-2
2-794677-4
794678-2
794678-4
794678-6
794678-8
1-794678-0
1-794678-2
1-794678-4
1-794678-6
1-794678-8
2-794678-0
2-794678-2
2-794678-4
794679-2
794679-4
794679-6
794679-8
1-794679-0
1-794679-2
1-794679-4
1-794679-6
1-794679-8
2-794679-0
2-794679-2
2-794679-4
794680-2
794680-4
794680-6
794680-8
1-794680-0
1-794680-2
1-794680-4
1-794680-6
1-794680-8
2-794680-0
2-794680-2
2-794680-4
794681-2
794681-4
794681-6
794681-8
1-794681-0
1-794681-2
1-794681-4
1-794681-6
1-794681-8
2-794681-0
2-794681-2
2-794681-4
794682-2
794682-4
794682-6
794682-8
1-794682-0
1-794682-2
1-794682-4
1-794682-6
1-794682-8
2-794682-0
RoHS Compliant
Part Number
5-794677-0
5-794677-2
5-794677-4
3-794678-2
3-794678-4
3-794678-6
3-794678-8
4-794678-0
4-794678-2
4-794678-4
4-794678-6
4-794678-8
5-794678-0
5-794678-2
5-794678-4
3-794679-2
3-794679-4
3-794679-6
3-794679-8
4-794679-0
4-794679-2
4-794679-4
4-794679-6
4-794679-8
5-794679-0
5-794679-2
5-794679-4
3-794680-2
3-794680-4
3-794680-6
3-794680-8
4-794680-0
4-794680-2
4-794680-4
4-794680-6
4-794680-8
5-794680-0
5-794680-2
5-794680-4
3-794681-2
3-794681-4
3-794681-6
3-794681-8
4-794681-0
4-794681-2
4-794681-4
4-794681-6
4-794681-8
5-794681-0
5-794681-2
5-794681-4
3-794682-2
3-794682-4
3-794682-6
3-794682-8
4-794682-0
4-794682-2
4-794682-4
4-794682-6
4-794682-8
5-794682-0
Non-Compliant
Part Number
2-794682-2
2-794682-4
794704-1
1445050-2
1445050-3
1445050-4
1445050-5
1445050-6
1445050-7
1445050-8
1445050-9
1-1445050-0
1-1445050-1
1-1445050-2
1445051-2
1445051-3
1445051-4
1445051-5
1445051-6
1445051-7
1445051-8
1445051-9
1-1445051-0
1-1445051-1
1-1445051-2
1445052-2
1445052-3
1445052-4
1445052-5
1445052-6
1445052-7
1445052-8
1445052-9
1-1445052-0
1-1445052-1
1-1445052-2
1445053-2
1445053-3
1445053-4
1445053-5
1445053-6
1445053-7
1445053-8
1445053-9
1-1445053-0
1-1445053-1
1-1445053-2
1445054-2
1445054-3
1445054-4
1445054-5
1445054-6
1445054-7
1445054-8
1445054-9
1-1445054-0
1-1445054-1
1-1445054-2
1445055-2
1445055-3
1445055-4
RoHS Compliant
Part Number
5-794682-2
5-794682-4
1586542-1
2-1445050-2
2-1445050-3
2-1445050-4
2-1445050-5
2-1445050-6
2-1445050-7
2-1445050-8
2-1445050-9
3-1445050-0
3-1445050-1
3-1445050-2
2-1445051-2
2-1445051-3
2-1445051-4
2-1445051-5
2-1445051-6
2-1445051-7
2-1445051-8
2-1445051-9
3-1445051-0
3-1445051-1
3-1445051-2
2-1445052-2
2-1445052-3
2-1445052-4
2-1445052-5
2-1445052-6
2-1445052-7
2-1445052-8
2-1445052-9
3-1445052-0
3-1445052-1
3-1445052-2
2-1445053-2
2-1445053-3
2-1445053-4
2-1445053-5
2-1445053-6
2-1445053-7
2-1445053-8
2-1445053-9
3-1445053-0
3-1445053-1
3-1445053-2
2-1445054-2
2-1445054-3
2-1445054-4
2-1445054-5
2-1445054-6
2-1445054-7
2-1445054-8
2-1445054-9
3-1445054-0
3-1445054-1
3-1445054-2
2-1445055-2
2-1445055-3
2-1445055-4
Non-Compliant
Part Number
1445055-5
1445055-6
1445055-7
1445055-8
1445055-9
1-1445055-0
1-1445055-1
1-1445055-2
1445056-2
1445056-3
1445056-4
1445056-5
1445056-6
1445056-7
1445056-8
1445056-9
1-1445056-0
1-1445056-1
1-1445056-2
1445057-2
1445057-3
1445057-4
1445057-5
1445057-6
1445057-7
1445057-8
1445057-9
1-1445057-0
1-1445057-1
1-1445057-2
1445058-2
1445058-3
1445058-4
1445058-5
1445058-6
1445058-7
1445058-8
1445058-9
1-1445058-0
1-1445058-1
1-1445058-2
1445084-2
1445084-3
1445084-4
1445084-5
1445084-6
1445084-7
1445084-8
1445084-9
1-1445084-0
1-1445084-1
1-1445084-2
1445085-2
1445085-3
1445085-4
1445085-5
1445085-6
1445085-7
1445085-8
1445085-9
1-1445085-0
RoHS Compliant
Part Number
2-1445055-5
2-1445055-6
2-1445055-7
2-1445055-8
2-1445055-9
3-1445055-0
3-1445055-1
3-1445055-2
2-1445056-2
2-1445056-3
2-1445056-4
2-1445056-5
2-1445056-6
2-1445056-7
2-1445056-8
2-1445056-9
3-1445056-0
3-1445056-1
3-1445056-2
2-1445057-2
2-1445057-3
2-1445057-4
2-1445057-5
2-1445057-6
2-1445057-7
2-1445057-8
2-1445057-9
3-1445057-0
3-1445057-1
3-1445057-2
2-1445058-2
2-1445058-3
2-1445058-4
2-1445058-5
2-1445058-6
2-1445058-7
2-1445058-8
2-1445058-9
3-1445058-0
3-1445058-1
3-1445058-2
2-1445084-2
2-1445084-3
2-1445084-4
2-1445084-5
2-1445084-6
2-1445084-7
2-1445084-8
2-1445084-9
3-1445084-0
3-1445084-1
3-1445084-2
2-1445085-2
2-1445085-3
2-1445085-4
2-1445085-5
2-1445085-6
2-1445085-7
2-1445085-8
2-1445085-9
3-1445085-0
Non-Compliant to RoHS Compliant Part Number Cross Reference
Non-Compliant
Part Number
1-794665-8
2-794665-0
2-794665-2
2-794665-4
794666-2
794666-4
794666-6
794666-8
1-794666-0
1-794666-2
1-794666-4
1-794666-6
1-794666-8
2-794666-0
2-794666-2
2-794666-4
794667-2
794667-4
794667-6
794667-8
1-794667-0
1-794667-2
1-794667-4
1-794667-6
1-794667-8
2-794667-0
2-794667-2
2-794667-4
794668-2
794668-4
794668-6
794668-8
1-794668-0
1-794668-2
1-794668-4
1-794668-6
1-794668-8
2-794668-0
2-794668-2
2-794668-4
794669-2
794669-4
794669-6
794669-8
1-794669-0
1-794669-2
1-794669-4
1-794669-6
1-794669-8
2-794669-0
2-794669-2
2-794669-4
794677-2
794677-4
794677-6
794677-8
1-794677-0
1-794677-2
1-794677-4
1-794677-6
1-794677-8
219
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Non-Compliant to RoHS Compliant Part Number Cross Reference (Continued)
Non-Compliant to RoHS Compliant Part Number Cross Reference
Non-Compliant
Part Number
1-1445085-1
1-1445085-2
1445086-2
1445086-3
1445086-4
1445086-5
1445086-6
1445086-7
1445086-8
1445086-9
1-1445086-0
1-1445086-1
1-1445086-2
1445087-2
1445087-3
1445087-4
1445087-5
1445087-6
1445087-7
1445087-8
1445087-9
1-1445087-0
1-1445087-1
1-1445087-2
1445088-2
1445088-3
1445088-4
1445088-5
1445088-6
1445088-7
1445088-8
1445088-9
1-1445088-0
1-1445088-1
1-1445088-2
1445089-2
1445089-3
1445089-4
1445089-5
1445089-6
1445089-7
1445089-8
1445089-9
1-1445089-0
1-1445089-1
RoHS Compliant
Part Number
3-1445085-1
3-1445085-2
2-1445086-2
2-1445086-3
2-1445086-4
2-1445086-5
2-1445086-6
2-1445086-7
2-1445086-8
2-1445086-9
3-1445086-0
3-1445086-1
3-1445086-2
2-1445087-2
2-1445087-3
2-1445087-4
2-1445087-5
2-1445087-6
2-1445087-7
2-1445087-8
2-1445087-9
3-1445087-0
3-1445087-1
3-1445087-2
2-1445088-2
2-1445088-3
2-1445088-4
2-1445088-5
2-1445088-6
2-1445088-7
2-1445088-8
2-1445088-9
3-1445088-0
3-1445088-1
3-1445088-2
2-1445089-2
2-1445089-3
2-1445089-4
2-1445089-5
2-1445089-6
2-1445089-7
2-1445089-8
2-1445089-9
3-1445089-0
3-1445089-1
Non-Compliant
Part Number
1-1445089-2
1445090-2
1445090-3
1445090-4
1445090-5
1445090-6
1445090-7
1445090-8
1445090-9
1-1445090-0
1-1445090-1
1-1445090-2
1445091-2
1445091-3
1445091-4
1445091-5
1445091-6
1445091-7
1445091-8
1445091-9
1-1445091-0
1-1445091-1
1-1445091-2
1445092-2
1445092-3
1445092-4
1445092-5
1445092-6
1445092-7
1445092-8
1445092-9
1-1445092-0
1-1445092-1
1-1445092-2
1445093-2
1445093-3
1445093-4
1445093-5
1445093-6
1445093-7
1445093-8
1445093-9
1-1445093-0
1-1445093-1
1-1445093-2
RoHS Compliant
Part Number
3-1445089-2
2-1445090-2
2-1445090-3
2-1445090-4
2-1445090-5
2-1445090-6
2-1445090-7
2-1445090-8
2-1445090-9
3-1445090-0
3-1445090-1
3-1445090-2
2-1445091-2
2-1445091-3
2-1445091-4
2-1445091-5
2-1445091-6
2-1445091-7
2-1445091-8
2-1445091-9
3-1445091-0
3-1445091-1
3-1445091-2
2-1445092-2
2-1445092-3
2-1445092-4
2-1445092-5
2-1445092-6
2-1445092-7
2-1445092-8
2-1445092-9
3-1445092-0
3-1445092-1
3-1445092-2
2-1445093-2
2-1445093-3
2-1445093-4
2-1445093-5
2-1445093-6
2-1445093-7
2-1445093-8
2-1445093-9
3-1445093-0
3-1445093-1
3-1445093-2
Non-Compliant
Part Number
1445094-2
1445094-3
1445094-4
1445094-5
1445094-6
1445094-7
1445094-8
1445094-9
1-1445094-0
1-1445094-1
1-1445094-2
1445095-2
1445095-3
1445095-4
1445095-5
1445095-6
1445095-7
1445095-8
1445095-9
1-1445095-0
1-1445095-1
1-1445095-2
1445096-2
1445096-3
1445096-4
1445096-5
1445096-6
1445096-7
1445096-8
1445096-9
1-1445096-0
1-1445096-1
1-1445096-2
1445097-2
1445097-3
1445097-4
1445097-5
1445097-6
1445097-7
1445097-8
1445097-9
1-1445097-0
1-1445097-1
1-1445097-2
1445098-2
RoHS Compliant
Part Number
2-1445094-2
2-1445094-3
2-1445094-4
2-1445094-5
2-1445094-6
2-1445094-7
2-1445094-8
2-1445094-9
3-1445094-0
3-1445094-1
3-1445094-2
2-1445095-2
2-1445095-3
2-1445095-4
2-1445095-5
2-1445095-6
2-1445095-7
2-1445095-8
2-1445095-9
3-1445095-0
3-1445095-1
3-1445095-2
2-1445096-2
2-1445096-3
2-1445096-4
2-1445096-5
2-1445096-6
2-1445096-7
2-1445096-8
2-1445096-9
3-1445096-0
3-1445096-1
3-1445096-2
2-1445097-2
2-1445097-3
2-1445097-4
2-1445097-5
2-1445097-6
2-1445097-7
2-1445097-8
2-1445097-9
3-1445097-0
3-1445097-1
3-1445097-2
2-1445098-2
Non-Compliant
Part Number
1445098-3
1445098-4
1445098-5
1445098-6
1445098-7
1445098-8
1445098-9
1-1445098-0
1-1445098-1
1-1445098-2
1445099-2
1445099-3
1445099-4
1445099-5
1445099-6
1445099-7
1445099-8
1445099-9
1-1445099-0
1-1445099-1
1-1445099-2
1445100-2
1445100-3
1445100-4
1445100-5
1445100-6
1445100-7
1445100-8
1445100-9
1-1445100-0
1-1445100-1
1-1445100-2
1445101-2
1445101-3
1445101-4
1445101-5
1445101-6
1445101-7
1445101-8
1445101-9
1-1445101-0
1-1445101-1
1-1445101-2
RoHS Compliant
Part Number
2-1445098-3
2-1445098-4
2-1445098-5
2-1445098-6
2-1445098-7
2-1445098-8
2-1445098-9
3-1445098-0
3-1445098-1
3-1445098-2
2-1445099-2
2-1445099-3
2-1445099-4
2-1445099-5
2-1445099-6
2-1445099-7
2-1445099-8
2-1445099-9
3-1445099-0
3-1445099-1
3-1445099-2
2-1445100-2
2-1445100-3
2-1445100-4
2-1445100-5
2-1445100-6
2-1445100-7
2-1445100-8
2-1445100-9
3-1445100-0
3-1445100-1
3-1445100-2
2-1445101-2
2-1445101-3
2-1445101-4
2-1445101-5
2-1445101-6
2-1445101-7
2-1445101-8
2-1445101-9
3-1445101-0
3-1445101-1
3-1445101-2
220
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos.
(with prefixes and/or suffixes) are shown
on the page(s) indicated.
Page
85, 88
85, 87
85, 87
85, 87
85, 87
85, 87
85, 88
85, 88
85, 88
85, 87
85, 87
85, 89
85, 89
85, 89
86
184, 199
184, 199
184, 199
85
85, 89
85
154, 164
86
60, 62, 71
60, 62, 71
60, 63, 71
60, 63, 71
60, 63, 71
60, 64, 71
60, 64, 71
60, 64, 71
60, 67, 71
60, 67, 71
60, 68, 71
60, 68, 71
60, 69, 71
60, 69, 71
60, 70-71
61, 211
61, 211
61, 211
61, 211
60, 71
60, 71
60, 71
60, 71
60, 65, 71
60, 65, 71
60, 66, 71
60, 66, 71
60, 66, 71
61
61
61
61
61, 72
61, 72
61, 73
61, 73
61, 74
61, 74
61, 79
Part No.
179847
179848
179849
179861
179862
179938
179939
179944
179945
193796
193797
193839
193841
193842
194002
194009
194010
194012
194013
194014
194017
194018
200821
306088
316061
316062
316063
316086
316087
316088
316089
316090
316091
316092
316094
316221
316222
316223
316224
316225
316226
316227
316299
316398
316399
316400
316401
316454
316455
316501
316502
316768
316769
316770
350020
350021
350022
350073
350074
350078
350079
350200
Page
61, 79
61, 80
61, 80
61, 75, 77
61, 76-77
61, 75, 77
61, 75, 77
61
61
201
201
201
201
201
202
202
202
202
202
202
202
202
156
14
60, 78
60, 78
60, 78
10, 12, 14
10, 12, 14
10, 12, 14
10, 12, 14
10, 12, 14
10, 12, 14
10, 12, 14
10, 12, 14
16
16
16
16
16
16
16
72
12
12
12
12
94
94
60, 62, 71
60, 67, 71
60, 62, 71
60, 65, 71
60, 71
116
116
116
156
156
155, 212
155, 212
166, 212
Part No.
350201
350209
350210
350211
350212
350213
350214
350218
350219
350220
350344
350345
350346
350347
350373
350374
350375
350376
350377
350378
350379
350380
350388
350389
350390
350391
350415
350416
350417
350418
350422
350423
350424
350425
350426
350427
350428
350429
350430
350431
350432
350433
350434
350444
350522
350523
350524
350536
350537
350538
350539
350540
350541
350542
350543
350544
350547
350550
350551
350552
350557
350558
Page
166, 212
153, 161
153, 161
154, 161, 163
153, 161
153, 161
153, 161
172, 181, 213
153, 161
153, 161
167
167
167
167
116
116
116
116
116
116
116
116
166
166
166
166
145, 212
145, 212
145, 212
145, 212
153, 161
153, 161
154, 161, 163
153, 161
153, 161
153, 161
171, 182
171, 182
171, 182
171, 182
171, 182
171, 182
171, 182
155
116
116
116
172, 181, 213
172, 213
172, 213
153, 158, 161
153, 158, 161
153, 158, 161
153, 161
154, 158, 161
154, 158, 161
172, 181
172, 181
172
172
155, 212
155, 212
Part Number Index
Part No.
Page
60617
155
60618
155
60619
155
60620
155
60842
155
60843
155
61085
203, 213
61086
203, 213
61116
155, 214
61117
155, 214
61118
155, 214
61173
155
61174
155
61233
203, 213
61234
203, 213
61250
213
61251
213
61252
213
61253
213
61314
155, 212
61320
156
61518
156
61527
156, 212
61626
166, 212
61627
166, 212
106527
126
106528
126, 212
106529
126, 212
171636
213
171637
213
171638
86
171639
86
172156
85, 87
172157
85, 87
172158
85, 87
172159
85, 87
172160
85, 87
172161
85, 88
172162
85, 88
172163
85, 88
172164
85, 87, 92
172165 85, 87, 90, 92, 103, 105
172166 85, 87, 90, 92, 103, 105
172167 85, 87, 90-92, 103-105
172168 85, 87, 90-92, 103-105
172169 85, 88, 90-92, 103-105
172170 85, 88, 90-92, 103-105
172171 85, 88, 90-92, 103-105
172233
85, 87
172234
85, 87
172327
85, 87
172328
85, 87
172329
85, 87
172330
85, 87
172331
85, 87
172332
85, 88
172333
85, 88
Part No.
172334
172335
172336
172337
172338
172339
172340
172341
172342
172343
172344
172807
172808
172809
172971
173924
173925
173926
173956
173957
173958
174552
174670
177898
177899
177900
177901
177902
177903
177904
177905
177906
177907
177908
177909
177911
177912
177913
177914
177915
177916
177917
177918
177919
177920
177921
179463
179464
179465
179466
179467
179592
179593
179594
179595
179838
179839
179840
179841
179843
179844
179846
221
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Part Number Index (Continued)
Part Number Index
Part No.
350561
350570
350576
350577
350578
350579
350582
350583
350584
350585
350586
350587
350588
350589
350590
350591
350628
350629
350638
350639
350641
350642
350643
350644
350654
350669
350687
350689
350690
350699
350700
350705
350706
350707
350711
350712
350713
350714
350715
350720
350732
350735
350736
350737
350738
350742
350759
350760
350761
350762
350763
350764
350765
350766
350767
350777
350778
Page
172, 212
172, 212
153, 162
153, 162
153, 162
153, 162
171, 182
171, 182
171, 182
171, 182
171, 182
171, 182
171, 182
175
173
112
55, 211
55, 211
155
155
153, 162
153, 162
153, 162
153, 162
173, 181, 213
173, 181
173, 181, 213
172
172
173, 213
173, 213
173, 181
173
173
171, 182, 191, 197
171, 182, 191, 197
171, 182, 191, 197
171, 182, 191, 197
171, 174, 182-183,
197-198
171, 174, 182-183,
197-198
171, 182, 191, 197
171, 174, 182-183,
197-198
171, 174, 182-183,
197-198
171, 182, 191, 197
171, 182, 191, 197
171, 182, 191, 197
171, 183
171, 183
171, 183
171, 183
171, 183
171, 183
171, 183
171, 174, 182-185,
197-200
171, 174
171, 174, 182-185,
197-200
171, 174
Part No.
350779
350780
350781
350782
350783
350784
350786
350787
350789
350790
350792
350793
350809
350810
350811
350812
350824
350825
350826
350827
350828
350829
350830
350831
350832
350833
350834
350835
350836
350837
350838
350848
350849
350851
350865
350866
350867
350871
350873
350874
350877
350918
350919
350922
350923
350924
350925
350942
350943
350944
350945
350948
350949
350967
350968
350969
350986
350987
350988
350989
Page
171, 174, 182-185,
197-200
171, 174
171, 174
171, 174
171, 174
171, 174
171, 182, 191, 197
171, 182, 191, 197
171, 182, 191, 197
171, 182, 191, 197
171, 182, 191, 197
171, 182, 191, 197
171, 174, 182-183,
185, 197-198
171, 174, 193
173
173
171, 183, 191, 198
171, 183, 191, 198
171, 183, 191, 198
171, 183, 191, 198
171, 183, 191, 198
171, 183, 191, 198
171, 183, 191, 198
171, 183, 191, 198
171, 183, 191, 198
171, 183, 191, 198
171, 183, 191, 198
171, 183, 191, 198
171, 183, 191, 198
171, 183, 191, 198
112
185
185
172, 212
171, 174
171, 174
171, 174
173
172, 213
172, 213
173
172
172
172, 213
172, 213
172, 212
172, 212
171, 183, 191, 200
171, 183, 191, 200
171, 183, 191, 200
171, 183, 191, 200
171, 185
171, 185
106, 205
106, 205
106, 205
171, 183
171, 183
171, 183
171, 183
Part No.
Page
350990
171, 183
350991
171, 183
350992
171, 183
353891
60, 78
380935
116
380936
116
380937
116
380991
153, 161
380999
153, 161
480270
153, 158, 160-161
480271
153, 160
480273
153, 159
480274
153, 159
480275
153, 159
480276
153, 159, 162
480277
153, 159, 162
480278
153, 159, 162
480283
153, 158, 160-161
480284
153, 160
480285
153, 158, 160-161
480286
153, 160
480287
153, 160-161
480288
153, 160
480303
153, 157, 161, 163
480304
153, 159
480305
153, 157, 159
480318
153, 157, 161, 163
480319
153, 157
480323
153, 159
480324
153, 159, 162
480339
153, 158
480340
153, 158
480345
153, 158
480349
153, 157
480350
153, 157
480351
153, 157
480387
153, 157
480388
153, 157
480393
153, 157
480400
153, 157
480401
153, 157
480424 154, 157, 165, 163-164
480425
154, 159
480426 154, 157, 165, 162-163
480438
153, 160-161
480439
153, 160
480498
153, 157
480510
166
480512
166
480585
166
480586
166
480594
116
480634
116
480672
167
480673
167
480698
171, 174, 182-184
480699
171, 174
480700
171, 174, 182-184
480701
171, 174
480702
171, 174, 182-185
480703
171, 174
480704
171, 174, 182-183
Part No.
Page
480705
171, 174
480706
171, 174, 182-183
480707
171, 174
480708
171, 174, 182-183
480709
171, 174
480710
171, 174, 182-183
480711
171, 174
480720
153,158,161
480721
153,158,161
480722
158, 161
480763 171, 174, 182-183, 185
480764
171, 174
480772
154
640309
172
640310
172
640347
172
640391
55, 211
640392
55, 211
640415
173
640466
171, 182
640467
171, 183
640497
105, 112
640498
105, 112
640499
105, 112
640500
105, 112
640501
105, 112
640502
105, 112
640503
105, 112
640504
105, 112
640505
105, 112
640506
105, 112
640507
105, 107
640508
105, 107
640509
105, 107
640510
105, 107
640511
105, 108
640512
105, 108
640513
105, 108
640514
105, 108
640515
105, 108
640516
105, 108
640517
105, 107, 112
640518
105, 107, 112
640519
105, 107, 112
640520
105, 107, 112
640521
105, 108, 112
640522
105, 108, 112
640523
105, 108, 112
640524
105, 108, 112
640525
105, 108, 112
640526
105, 108, 112
640545
112
640579
112
640580
112
640581 171, 174, 182-183, 185
640582
171, 174, 182, 185
640583
171, 185
640584
171, 185
640585
171, 174, 182, 185
640586
171, 174, 182, 185
640587
171, 185
640713
180, 196
222
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Part Number Index (Continued)
Page
180, 196
180, 196
180, 196
180, 196
180, 196
176
176
176
176
176
176
171, 182, 191, 197
171, 183, 191, 198
171
106, 205
112
154, 163
176
176
180, 196
176
176
171, 182
171, 182
171, 182
171, 182
180, 196
171, 182
171, 182, 191, 197
171, 182
171, 182, 191, 197
171, 182
171, 182, 191, 197
171, 182
171, 182, 191, 197
171, 182
171, 182, 191, 197
171, 182
171, 182, 191, 197
171, 182
171, 182, 191, 197
180, 196
176
171, 183, 191, 200
171, 183, 191, 200
171, 183, 191, 200
171, 183, 191, 200
171, 185
185
171, 185
185
176
176
171, 182
171, 182, 191, 197
171, 182
171, 182
171, 182
171, 183
171, 183, 191, 198
171, 183
171, 183, 191, 198
Part No.
643415
643416
643423
643424
643425
643426
643428
643429
643430
643488
643585
643749
770003
770004
770005
770006
770007
770008
770009
770010
770011
770012
770016
770017
770018
770019
770020
770021
770022
770023
770024
770025
770026
770027
770028
770029
770030
770031
770032
770033
770034
770035
770036
770037
770038
770039
770040
770041
770042
770043
770044
770045
770046
770047
770048
770049
Page
171, 183
171, 183, 191, 198
171, 183
171, 183, 191, 198
171, 183
171, 183, 191, 198
171, 183, 191, 198
171, 183
171, 183, 191, 198
153, 163
176
182
192, 213
192, 213
192, 213
192, 213
192, 213
192, 213
192, 213
192, 213
192, 213
192, 213
194-195, 185, 191,
193, 195, 197-198
194-195, 191, 193,
195, 197-201
194-195, 191, 193,
195, 197-201
194-195, 191, 193,
195, 197-1201
194-195, 191, 194-195,
197-198, 201
194-195, 191, 194-195,
197-198, 201
194-195, 191, 194-195,
197-198, 201
194-195, 191, 194-195,
197-198, 201
191, 193, 195, 201
191, 193, 195, 201
191, 193, 195, 201
191, 194-195, 201
191, 194-195, 201
191, 194-195, 201
191, 194-195, 201
195
195
195
195
195
195
195
195
195
195
195
195
195
195
195
195
195
195
195
Part No.
770050
770051
770052
770053
770054
770055
770056
770057
770058
770063
770064
770065
770066
770068
770069
770070
770071
770073
770074
770075
770076
770077
770078
770083
770084
770085
770086
770087
770088
770089
770090
770091
770092
770093
770094
770095
770096
770097
770098
770099
770100
770101
770102
770103
770105
770106
770107
770108
770143
770144
770145
770146
770147
770156
770166
770170
770174
770178
770182
770186
770190
770193
Page
195
195
195
195
195
195
195
195
195
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
171, 182
145
145
145
145
154, 163
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
192, 213
Part No.
770194
770210
770232
770233
770234
770246
770247
770248
770249
770250
770251
770252
770253
770254
770255
770262
770264
770266
770269
770272
770274
770275
770276
770277
770278
770319
770320
770326
770329
770330
770331
770332
770333
770334
770335
770336
770337
770338
770339
770340
770341
770342
770343
770351
770353
770354
770355
770356
770360
770361
770364
770365
770372
770373
770377
770383
770385
770416
770419
770421
770424
770425
Page
192, 213
173, 213
163
163
173, 213
192
192
192
192
192
192
192
192
192
192
171, 183
146
146
148
182
56
56
148
56
56
195
195
56
148
148
56
56
56
56
56
148
148
148
148
56
56
56
56
182
56
56
56
56
148
148
145, 149
145, 149
148
148
180, 196
145, 212
145, 212
192
56
171, 174
149
149
Part Number Index
Part No.
640714
640715
640716
640717
640718
640719
640720
640721
640722
640723
640724
640900
640901
641083
641294
641300
641737
641763
641775
641776
641777
641778
641825
641828
641831
641832
641945
641963
641964
641965
641966
641967
641968
641969
641970
641971
641972
641973
641974
641975
641976
643030
643182
643226
643228
643230
643232
643234
643235
643236
643237
643313
643314
643405
643406
643407
643408
643410
643411
643412
643413
643414
223
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Part Number Index (Continued)
Part Number Index
Part No.
Page
770426
56
770427
56
770428
56
770429
56
770433
56
770441
56
770442
56
770443
56
770450
145, 149
770451
145, 149
770452
145, 149
770453
145, 149
770512
192
770526
154
770529
145, 212
770530
145, 212
770579 85, 88, 90-93, 103-106
770580 85, 88, 90-93, 103-106
770581 85, 88, 90, 92, 103, 105
770582 85, 88, 90, 92, 103, 105
770583 85, 88, 90, 92, 103, 105
770584 85, 88, 90, 92, 103, 105
770585 85, 88, 90, 92, 103, 105
770586 85, 88, 90, 92, 103, 105
770587 85, 88, 90, 92, 103, 105
770621
85, 90, 103, 107
770672
172
770673
172
770743
85, 90, 103, 107
770771
148
770782
146
770783
149
770784
149
770785
149
770810
149
770827
154, 157, 163
770829
154, 162-163
770834
85, 211
770835
85, 211
770842
146
770843
146
770846
154, 163
770858
85, 90, 103, 107
770859
85, 90, 103, 107
770872
85, 90, 103, 107
770872
97
770873
85, 90, 103, 107
770874
85, 90, 103, 107
770875
85, 90, 103, 107
770876
85, 90, 103, 107
770892
146
770901
86, 96, 211
770902
86, 96, 211
770903
86, 96, 211
770904
86, 96, 211
770966
85, 91, 105, 107
770967
85, 91, 105, 107
770968
85, 91, 105, 107
770969
85, 91, 105, 107
770970
85, 91, 105, 107
770971
85, 91, 105, 107
770972
85, 91, 105, 107
Part No.
770973
770974
770983
770985
770986
770987
770988
770994
770997
794000
794001
794012
794015
794016
794017
794018
794019
794036
794040
794046
794058
794059
794061
794065
794066
794067
794068
794069
794070
794071
794072
794073
794074
794075
794076
794077
794078
794079
794096
794103
794105
794106
794107
794108
794116
794117
794118
794120
794132
794138
794139
794140
794141
794142
794143
794184
794185
794186
794187
794188
Page
85, 91, 105, 107
85, 91, 105, 107
53, 55
85, 96
85, 96
85, 96
85, 96
185
154, 162
106, 205
112
153, 158
146
55
55
55
55
154, 163
85, 90, 103, 107
55, 211
86
86
167
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
85, 90, 103, 107
171, 174
55, 211
85, 91, 105, 107
85, 91, 105, 107
85, 91, 105, 107
85, 91, 105, 107
214
214
214
153, 163
154, 157
126, 212
126, 212
126, 212
126
126
126
90, 92, 101, 103,
105, 107
101, 107
90, 92, 101, 103,
105, 107
101, 107
90-92, 99, 101-102, 107
Part No.
Page
794189
101, 107
794190 90-92, 99, 101-102, 107
794191
101, 107
794192 90-91, 100-101, 105, 107
794193
101, 107
794194
90-91, 100-102, 107
794195
101, 107
794196
90-91, 100-105, 107
794197
101, 107
794198
90, 92, 100-101,
105, 107
794199
101, 107
794200
90-91, 100-102, 107
794201
101, 107
794202
90, 92, 100-101,
105, 107
794203
101, 107
794204
90-91, 100-102, 107
794205
101, 107
794206
90, 92, 100-101,
105, 107
794207
101, 107
794208
90, 92, 100-101,
105, 107
794209
101, 107
794210
90, 92, 100-101,
105, 107
794211
101, 107
794212
90, 92, 100-101,
105, 107
794213
101, 107
794214
90, 92, 100-101,
105, 107
794215
101, 107
794216
100, 211
794217
100, 211
794218
100, 211
794219
100, 211
794220
100, 211
794221
100, 211
794222
100, 211
794223
100, 211
794224
100
794225
100
794226
100
794227
100
794228
100
794229
100
794230
100
794231
100
794236
154, 161
794237
101, 107
794238
101, 107
794239
101, 107
794240
101, 107
794241
101, 107
794242
101, 107
794243
101, 107
794244
101, 107
794245
101, 107
794246
101, 107
794247
101, 107
794248
101, 107
794249
101, 107
Part No.
794250
794251
794252
794253
794254
794255
794256
794257
794258
794259
794260
794261
794262
794263
794264
794265
794266
794267
794268
794269
794270
794271
794272
794273
794274
794275
794276
794277
794278
794279
794280
794281
794282
794285
794287
794302
794303
794304
794305
794306
794307
794308
794309
794310
794311
794312
794313
794325
794326
794327
794328
794329
794330
794349
794350
794351
794352
794353
794354
794355
794356
794357
Page
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
101, 107
179
179
179
179
179
179
179
179
179
179
179
179
179
179
162
154, 162
128
128
128
129
129
130
130
131
131
132
132
133
85, 90, 104, 107
85, 90, 104, 107
85, 90, 104, 107
85, 90, 104, 107
85, 90, 104, 107
85, 90, 104, 107
128
128
128
129
129
130
130
131
131
224
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Part Number Index (Continued)
Page
132
132
133
101
94
85, 92
53, 55
86
86
214
214
132
126,212
126
94
131
85, 90, 104, 107
133
133
130
131
132
128
128
129
129
130
132
133
128
128
129
129
130
130
131
131
132
132
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
171
171
171
Part No.
794538
794540
794542
794543
794545
794546
794550
794576
794577
794578
794579
794588
794589
794590
794594
794598
794606
794606
794607
794608
794609
794610
794610
794611
794611
794612
794613
794615
794616
794617
794618
794619
794620
794621
794622
794623
794624
794625
794626
794627
794628
794629
794630
794631
794632
794633
794634
794635
794636
794637
794638
794657
794677
794678
794679
794680
794681
794682
794683
794699
794700
Page
171
128
127
128
171
171
127
121, 206
127
121, 206
127
133
133
133
127
127
19-22, 211
20
19-22, 211
19, 22, 211
19, 22, 211
19-22
20
19-22
20
19, 22
19, 22
19, 28
19, 27
19, 21, 24, 34-37,
43-47
21, 44
21, 44
21, 44
21, 46
21, 46
21, 46
21, 45
21, 45
21, 45
21, 47
21, 47
21, 47
21, 34
21, 34
21, 34
21, 36
21, 36
21, 36
21, 37
21, 37
21, 37
126
21, 43
21, 43
21, 43
21, 35
21, 35
21, 35
167
167
166
Part No.
794707
794714
794715
794716
794727
794758
794760
794761
794762
794772
794772
794781
794781
794805
794805
794814
794815
794821
794821
794824
794824
794851
794863
794894
794894
794895
794896
794899
794900
794901
794911
794912
794939
794940
794941
794942
794953
794954
794955
794956
794957
794958
794991
794992
794993
794994
794995
797607
917353
917354
917683
917684
917686
917687
917688
917689
917690
917691
917692
917693
917694
917695
Page
171
177
177
177
171
96
177
177
177
96
97
85, 96
97
85, 96
97
171
171
85, 96
97
96
97
171
171
85, 96
97
85, 96
85, 96
171
171
171
191
191
85, 96
85, 96
85, 96
85, 96
122
122
114, 206
114, 206
114, 206
114, 206
180
180
180
180
96
20
61, 81
61, 76-77
12-13, 205
12-13, 205
10, 12-13
10, 12-13
10, 12-13
10, 12-13
10, 12-13
10, 12-13
10, 12-13
10, 12-13
10, 12-13
10, 12-13
Part No.
917696
917697
917698
917699
917700
917701
917702
917703
917704
917705
917706
917707
917708
917709
917722
917723
917724
917725
917726
917727
917728
917729
917730
917731
917732
917733
917745
917746
917747
917764
917765
917780
917781
917782
917783
917784
917785
917786
917787
917788
917789
917790
917791
917845
917894
917895
917896
917897
917898
917899
917900
926302
926307
926308
926309
1375618
1376294
1376347
1376348
1376382
1376383
1376384
Page
10, 12-13
10, 12-13
10, 12
10, 12
10, 12
10, 12
10, 12
10, 12
10, 12
10, 12
10, 12
10, 12
10, 12
10, 12
10, 16
10, 16
10, 16
10, 16
10, 16
10, 16
10, 16
10, 16
10, 16
10, 16
10, 16
10, 16
61, 79
79
80
12, 14, 205
12, 14, 205
10, 15
10, 15
10, 15
10, 15
10, 15
10, 15
10, 15
10, 15
10, 15
10, 15
10, 15
10, 15
61,73
15
15
15
15
15
15
15
171, 174
171, 174
171, 174
171, 174
126-127
136
137, 212
137, 212
136, 138, 140
136, 138, 140
136, 138, 140
Part Number Index
Part No.
794358
794359
794360
794369
794370
794374
794380
794406
794407
794412
794413
794415
794418
794421
794423
794429
794432
794448
794449
794453
794454
794455
794466
794467
794468
794469
794470
794471
794472
794484
794485
794486
794487
794488
794489
794490
794491
794492
794493
794494
794507
794508
794509
794510
794511
794512
794513
794514
794515
794516
794526
794527
794528
794529
794530
794531
794532
794533
794534
794535
794536
794537
225
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Part Number Index (Continued)
Part Number Index
Part No.
Page
1376385
136, 138, 140
1376386
136, 139, 141
1376387
136, 139, 141
1376388
136-138, 140
1376389
136-138, 140
1376390
136-138, 140
1376391
136-138, 140
1376392
136, 139, 141
1376393
136, 139, 141
1376394
136-139
1376395
136-139
1376396
136-138
1376397
136-138
1376421
136, 138, 140
1376437
140
1376439
140
1376440
140
1376441
140
1376442
140
1376443
140
1376444
140
1445022 19-20, 23, 30-33, 38-42
1445048
19, 26
1445049
19, 25
1445050
20, 30
1445051
20, 31
1445052
20, 32
1445053
20, 33
1445054
20, 38
1445055
20, 39
1445056
20, 40
1445057
20, 41
1445058
20, 42
1445084
20, 30
1445085
20, 31
1445086
20, 32
Part No.
1445087
1445088
1445089
1445090
1445091
1445092
1445093
1445094
1445095
1445096
1445097
1445098
1445099
1445100
1445101
1565079
1565080
1565081
1565082
1565083
1565084
1565085
1565086
1565087
1565088
1586000
1586017
1586018
1586019
1586022
1586023
1586024
1586025
1586026
1586027
1586037
Page
20, 33
20, 38
20, 39
20, 40
20, 41
20, 42
20, 30
20, 31
20, 32
20, 33
20, 38
20, 39
20, 40
20, 41
20, 42
50, 211
50, 211
51
51
52
52
51
51
52
52
122
122
122
122
121
121
121
121
121
121
123
Part No.
1586038
1586039
1586040
1586041
1586042
1586043
1586044
1586101
1586102
1586103
1586104
1586105
1586106
1586305
1586314
1586315
1586316
1586317
1586359
1586359
1586362
1586362
1586404
1586489
1586490
1586491
1586492
1586493
1586494
1586495
1586496
1586512
1586514
1586515
1586518
1586520
Page
123
123
123
123
123
123
123
121
121
121
121
121
121
167
121
121
121
121
97
96
96
97
96
128-133
128-133
128-133
128-133
128-133
128-133
128-133
128-133
153, 161
153, 161
154, 161
153, 161
153, 161
Part No.
1586522
1586524
1586525
1586526
1586528
1586529
1586530
1586532
1586534
1586536
1586539
1586544
1586546
1586585
1586586
1586587
1586588
1586627
1604210
1604254
1604256
1604941
1612334
1612335
1903486
1903487
1903720
1939343
1939344
2029030
2029047
2029056
2029058
2029102
2029104
Page
153, 161
153, 161
154, 161
153, 161
153, 161
153, 161
153, 161
153, 161
154, 161
154, 161
162
153, 161
153, 161
124
124
124
124
161
178
178
178
178
50, 211
50, 211
60, 78
60, 78
60 ,66
60 ,73, 78
60
20, 29
20, 29
97
97
20, 29
20, 29
226
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Tooling Part Number Index
91085
91112
91387
91388
91500
91501
Page
163, 206
166, 210
166, 210
172, 192, 210
192, 201, 206
172, 192, 210
210
203, 210
203, 210
209-210
166, 172, 192, 210
210
166
210
210
210
210
210
126,210
86, 100,210
210
210
210
55, 210
55, 210
145,210
145, 210
55, 86, 145, 172,
181, 192, 203, 206
163, 206
163, 206
120, 210
120, 210
172-173, 181,
192, 210
22, 209-210
Part No.
91502
91504
91506
91508
91510
91512
91515
91522
91526
91528
91529
91534
91536
91552
91567
91569
91594
188688
189727
231894
231920
234603
234604
234605
234912
234914
305183
318831
318837
318845
318851
354500
356114
356337
356500
Page
22, 209-210
155, 210
172-173, 192,210
172-173, 192,210
172-173, 192,210
155-156, 210
155, 210
86, 96, 100, 210
112, 210
155
86, 96, 100, 210
112, 210
86
210
61, 210
61, 210
100, 210
126
86, 206
163, 206
163, 206
12, 210
12, 210
12
61
61
155, 206
55, 206
145, 206
166, 206
172, 181, 192,
201, 206
207
201
201
208
Part No.
455822
455830
457306
465644
466320
466351
466352
466426
466462
466588
466597
466616
466656
466686
466878
466913
466917
466920
466922
466955
466959
466986
466989
466990
567066
567067
567211
567212
567213
567214
567216
567251
567252
567273
567306
Page
112, 206
112, 155, 206
116
155, 206
155-156, 172-173,
212-213
112, 211
112, 211
155, 212
203, 213
172, 213
172-173, 213
172, 212
145, 212
55, 211
145, 212
211
212-213
212-213
212
211
212
211
213
211
86, 96, 100, 211
86, 96, 211
192, 213
192, 213
192, 213
192, 213
173, 213
211
192, 213
145, 212
166, 212
Part No.
567309
567337
567418
567902
567913
567914
567959
567960
587309
680307
680308
680350
680582
680854
680893
680894
687763
687765
687898
687926
687996
691458
794381
843996
854040
1385194
1385377
1385448
1385817
1586343
1586344
1586700
1596277
Page
166, 212
145, 212
86, 100, 211
211
213
213
126-127, 212
126-127, 212
212
126-127, 212
126-127, 212
126, 212
86, 100, 211
100, 211
22, 211
22, 211
155, 172-173,
181, 212-213
155, 212
172-173, 213
55, 211
203, 206
181
22
207
22, 211
22, 211
120, 212
120, 212
120
22
172, 206
50, 210
Tooling Part Number Index
Part No.
58074
58373
58374
58380
58382
58439
58514
58631
58632
65780
69710
82276
90247
90546
90547
90548
90574
90575
90714
90717
90758
90759
90760
90869
90870
90871
90872
91002
227
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
228
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
229
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Soft Shell
Pin and Socket Connectors
AMP
Engineering Notes
230
Catalog 82181
Revised 4-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Global Contacts
Americas
Argentina – Buenos Aires
Phone:
+54-11-4733-2200
Fax:
+54-11-4733-2211
Brasil – São Paulo
Phone:
+55-11-3611-1311
Fax:
+55-11-3611-0397
Canada – Toronto
Phone:
+905-475-6222
Fax:
+905-474-5520
Product Information Center:
(Technical Support)
Phone:
+905-470-4425
Fax:
+905-474-5525
Colombia – Bogota
Phone:
+57-1-231-9398
Fax:
+57-1-660-0206
Mexico – Mexico City
Phone:
+52-55-1106-0800
+01-800-733-8926
Fax:
+52-55-1106-0901
For Latin/South American
Countries not shown
Phone:
+54-11-4733-2015
Fax:
+54-11-4733-2083
United States – Harrisburg, PA
Phone:
+717-564-0100
Fax:
+717-986-7575
Product Information Center:
(Technical Support)
Phone:
+800-522-6752
Fax:
+717-986-7575
Asia/ Pacific
Australia – Sydney
Phone:
+61-2-9554-2600
Fax:
+61-2-9502-2556
Product Information Center:
(Technical Support)
Phone:
+61-2-9840-8200
Fax:
+61-2-9634-6188
Japan – Toyko
Phone:
+81-44-844-8111
Fax:
+81-44-812-3207
Product Information Center:
(Technical Support)
Phone:
+81-44-844-8013
Fax:
+81-44-812-3200
New Zealand – Auckland
Phone:
+64-9-634-4580
Fax:
+64-9-634-4586
Singapore – Singapore
Phone:
+65-6482-0311
Fax:
+65-6482-1012
Philippines – Makati City
Phone:
+632-848-0171
Fax:
+632-867-8661
Thailand – Bangkok
Phone:
+66-2-955-0500
Fax:
+66-2-955-0505
India – Bangalore
Phone:
+91-80-285-40800
Fax:
+91-80-285-40820
Korea – Seoul
Phone:
+82-2-3415-4500
Fax:
+82-2-3486-3810
People’s Republic of China
Hong Kong
Phone:
+852-2735-1628
Fax:
+852-2735-0243
Vietnam and Indochina –
Ho Chi Minh City
Phone:
+84-8 930-5546
Fax:
+84-8 930-3443
Indonesia – Jakarta
Phone:
+65-6482-0311
Fax:
+65-6482-1012
Malaysia – Kuala Lumpur
Phone:
+60-3-78053055
Fax:
+60-3-78053066
Shanghai
Phone:
+86-21-2407-1588
Fax:
+86-21-2407-1599
Taiwan – Taipei
Phone:
+886-2-8768-2788
Fax:
+886-2-8768-2268
Europe/ Middle East/Africa
Austria – Vienna
Phone:
+43-1 90 5 60-0
Fax:
+43-1 90 5 60-1333
Belgium – Kessel-Lo
Phone:
+32-16-35-23-00
Fax:
+32-16-35-23-52
Germany – Bensheim
Phone:
+49-6251-133-0
Fax:
+49-6251-133-1600
Product Information Center:
(Technical Support)
Phone:
+49-6251-133-1999
Fax:
+49-6251-133-1988
Bulgaria – Sofia
Phone:
+359-2-971-2152
Fax:
+359-2-971-2153
Germany – Langen
Phone:
+49-6103-709-0
Fax:
+49-6103-709-1223
Czech Republic – Kurim
Phone:
+420-5-41-162-111
Fax:
+420-5-41-162-223
Germany – Speyer
Phone:
+49-6232-30-0
Fax:
+49-6232-30-2243
Denmark – Glostrup
Phone:
+45-43-480-452
Fax:
+45-43-441-414
Germany - HTS Division – Neunkirchen
Phone:
+49-2247-305-0
Fax:
+49-2247-305-122
Egypt – Cairo
Phone:
+20-2-29 04 281
Fax:
+20-2-41 92 334
Greece – Athens
Phone:
+30-210-9370-396/397
Fax:
+30-210-9370-655
Estonia – Tartu
Phone:
+372-5138-274
Fax:
+372-7400-779
Hungary – Budapest
Phone:
+36-1-289-1000
Fax:
+36-1-289-1010
Finland – Helsinki
Phone:
+358-95-12-34-20
Fax:
+358-95-12-34-250
France – Cergy-Pontoise
Phone:
+33-1-3420-8888
Fax:
+33-1-3420-8600
Product Information Center:
(Technical Support)
Phone:
+33-1-3420-8943
Fax:
+33-1-3420-8623
Ireland – Dublin
Phone:
+353-1-820-3000
Fax:
+353-1-820-9790
Israel – Yokneam
Phone:
+972-4-959-0508
Fax:
+972-4-959-0506
Italy – Collegno (Torino)
Phone:
+39-011-4012-111
Fax:
+39-011-4031116
Lithuania – Vilnius
Phone:
+370-5-2131-402
Fax:
+370-5-2131-403
Netherlands – ’s-Hertogenbosch
Phone:
+31-73-624-62-46
Fax:
+31-73-621-23-65
Product Information Center:
(Technical Support)
Phone:
+31-73-6246-999
Fax:
+31-73-6246-998
Norway – Nesbru
Phone:
+47-66-77-8886
Fax:
+47-66-77-8855
Poland – Warsaw
Phone:
+48-22-45-76-700
Fax:
+48-22-45-76-720
Romania – Bucharest
Phone:
+40-21-311-3479/3596
Fax:
+40-21-312-0574
Russia – Moscow
Phone:
+7-495-926-5506/07/08/09
Fax:
+7-495-926-5505
Russia – St. Petersburg
Phone:
+7-812-718-8192
Fax:
+7-812-718-8193
Slovenia – Ljubljana
Phone:
+386-1561-3270
Fax:
+386-1561-3240
South Africa – Port Elizabeth
Phone:
+2741-503-4500
Fax:
+2741-581-0440
Spain – Barcelona
Phone:
+34-93-291-0330
Fax:
+34-93-201-7879
Product Information Center:
(Technical Support):
Phone:
+34-93-291-0330
Fax:
+34-93-200-3779
Sweden – Upplands Väsby
Phone:
+46-8-50-72-50-00
Fax:
+46-8-50-72-50-01
Switzerland – Steinach
Phone:
+41-71-447-0447
Fax:
+41-71-447-0444
Turkey – Istanbul
Phone:
+90-212-281-8181/2/3
Fax:
+90-212-281-8184
Ukraine – Kiev
Phone:
+380-044-206-2265
Fax:
+380-044-206-2264
United Kingdom – Swindon
Phone:
+44-8706-080-208
Fax:
+44-1793-572-516
Product Information Center:
(Technical Support)
Freephone GB: 0800-267-666
Phone:
+44-8706-080-208
Fax:
+44-208-420-8081
For Middle East/African Countries Not
Shown
Phone:
+33-1-3420-8866
Fax:
+33-1-3420-8300
231
82181–7.5M–MS–FP–4-08 0G3B
Printed in the U.S.A.
Tyco Electronics Corporation
www.tycoelectronics.com
Catalog 82181
Revised 4-08
tycoelectronics.com
82181–7.5M–MS–FP–4-08–2–0G3B
Soft Shell Pin and Socket Connectors
Tyco Electronics Corporation
Harrisburg, PA
AMP Soft Shell Pin
and Socket Connectors
工商网监
湘ICP备2023018690号
