Power Connectors & Interconnection Systems
MULTI-BEAM XL and MULTI-BEAM XLE Power Distribution Connector Systems
Board-Mount Connectors
Board-to-Board Products
Product Facts
■
Single-piece molded
housings
■
Custom configurable
modular design
■
AC and DC power in the
same connector — Meets
UL safety requirements
■
Current Interrupt ratings per
UL 1977 — for “Hot-Plug”
applications
■
Compact size — suitable
for distributed DC power
applications
■
Molded-in guide pins
provide generous blindmateability
■
Up to 3 levels of contact
sequencing:
■ 1st — Pwr/Gnd
■ 2nd — Pwr & Signals
■ 3rd — Trigger Signals
■
Low Mating and Un-mating
force
■
Solder or press-fit
termination to PCB
■
Meets SSI power connector
requirements for DPS, MPS
and HPS applications
■
■
30 micro-inch
[0.76 micro-meters]
gold post-plated contacts
for high reliability
All MULTI-BEAM XL and
MULTI-BEAM XLE products
in this section are RoHS
compliant
The MULTI-BEAM XL and
MULTI-BEAM XLE modules
are a blind-mateable boardto-board power distribution
connector system. With a
variety of available power
contacts and a modular
design, customers are able
to customize this connector
to their exact needs. In
addition to selecting the
number of power and
signal contacts, customers
are also able to choose the
mating sequence of contacts they need for their
specific application.
MULTI-BEAM XL connectors feature dual-beam and
four-beam power contacts,
rated at 35A. The new
MULTI-BEAM connector
features a true hot-plug
designed three-beam
contact, rated at 43A.
The product is also available in versions complying
with the Server Systems
Infrastructure (SSI)
Standard. MULTI-BEAM XL
and MULTI-BEAM XLE
products offer high reliability and high current density
in a package designed
specifically for modular
hot-swappable power
distribution systems. They
are ideal for blind-mating in
modular and rack mounted
systems. The high perform-
ance design and heavy
gold plated contacts meet
requirements across many
applications including
power distribution for compact (1U) computer servers
through high-end servers,
fault-tolerant computers,
networking equipment,
telecommunication
switches, medical instrumentation, and industrial
control equipment.
The compact design also
meets the I/O standard
of modern modular and
hot-swappable redundant
(N+1) power supplies
and uninterruptible power
supplies.
Technical Documents
Product Specification
108-1973
Application Specification
114-13038
File # E28476
R
R
File # LR7189
For More Information
Check out product information at:
http://mbxl.tycoelectronics.com
Technical Support Center
1-800-522-6752
10
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL and MULTI-BEAM XLE Power Distribution Connector Systems (Continued)
MULTI-BEAM XL Connector
■
■
■
■
■
■
■
■
Features new 3-beam power contact
Two hot-pluggable power contacts to choose from:
■ 50A High power contact (35% increase compared to
MULTI-BEAM XL connector)
■ 20A Low power contact (occupies 50% less PCB space
than MULTI-BEAM XL power contact)
Slimmer housing design allows 40% more current in the
same space
Over 40% lower mating force than original MULTI-BEAM XL
connector
Vented housing allows for better air flow
Board-to-Board Products
■
MULTI-BEAM XLE Connector
Expandable length to accommodate up to 36 power contacts
Contact spacings are expandable to accommodate higher
voltages and/or higher current requirements
4-beam or dual beam power contacts available
Base metal made from high conductivity copper alloy
(over 98% copper) offers superior performance compared to
alternative materials
Evolution of MULTI-BEAM Power Contacts
Power Contacts
Dual-Beam Contact
■ Original design
■ .017" thick stock
Contact Wipe
4-Beam Contact
■ .017" thick stock
■ 35A current rating
■ Features eight
independent beams
■ Parallel current paths
yield a lower contact
resistance
■ Tuned beam design
provides lower mating
forces and higher
durability life cycles
Contact Type
Power (or GND) Contact
Power Contact
Signal Contact
Signal (trigger) Contact
3-Beam Contact
■ Offered on new
MULTI-BEAM XLE
connector
■ .020" Thick Stock
■ 50A Current Rating
■ Improved design offers
lowest mating force
available in MULTI-BEAM
product line
■ True hot-plug design
preserves the separable
contact interface to
provide long term
reliability after hot-mate
and un-mate cycles
Description
Make First
Break Last (MFBL)
Standard
Standard
Make Last
Break First (MLBF)
Signal Contacts
Sequence
Minimum Wipe
1
0.200′′ [5.08 mm]
2
2
0.150′′ [3.81 mm]
0.150′′ [3.81 mm]
3
0.100′′ [2.54 mm]
The MLBF power contact and the Standard Signal contact are sequenced to mate at the same time ... sequence #2.
Product Configurations and Part Numbers
The connector configuration is described by reading Left-to-Right on the Plug mating interface and Right-to-Left on the
Receptacle mating interface. Custom configurations can be produced due to the modular design of the product.
Configuration Description: ACP indicates AC Power, P indicates DC Power, HDP indicates High Density Power, LP
indicates Low Power (MULTI-BEAM XLE connector only), S indicates Signal. The corresponding contact spacing and
voltage ratings are shown below.
ACP
0.300′′ [7.62 mm] spacing
300 Volts*
P
0.250′′ [6.35 mm] spacing
200 Volts*
HDP
0.200′′ [5.08 mm] spacing
Connection to same voltage*
LP
.115′′ [3.81 mm] spacing
200 Volts*
S
0.100′′ [2.54 mm] grid
60 Volts*
* With circuit board designed to UL 1950, IEC 60950
11
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector Systems
Board-Mount Connectors
Board-to-Board Products
Right-Angle Receptacles
Configuration *
1P/24S/1P
2P/24S/2P
3P/24S/3P
3ACP/24S/6P
5P/24S/6P
7P/32S/7P
8P/28S
8P/32S/8P
3ACP
8P
14P/32S
16S/4P
24S/6P
24S/8P
Part
Number
6450160-3
1-6450160-0
6450570-2
6450170-8
6450160-5
6450560-4
6450172-2
6450160-1
6450173-1
6450163-2
6450172-1
6450161-1
6450161-2
6450161-6
Application
SSI “DPS”
Distributed DC Power + Signal
Distributed DC Power + Signal
AC and DC Power + Signal
SSI “MPS”
Distributed DC Power + Signal
Distributed DC Power + Signal
AC and DC Power + Signal
AC Power
DC Power
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
Overall
Length ′′ and [mm]
1.925′′ [48.90 mm]
2.250′′ [57.15 mm]
2.750′′ [69.85 mm]
3.650′′ [92.71 mm]
4.350′′ [110.49 mm]
4.350′′ [110.49 mm]
3.350′′ [85.09 mm]
5.450′′ [138.43 mm]
1.550′′ [39.37 mm]
2.650′′ [67.31 mm]
4.950′′ [125.73 mm]
2.050" [52.07 mm]
2.750" [69.85 mm]
3.250" [82.55 mm]
PCB Tail Type
(Solder, Press-Fit)
Solder
Solder
Press-fit
Solder
Solder
Press-fit
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Power Contact
Sequencing
No
No
Yes
Yes
No
No
Yes
No
Yes
No
Yes
No
No
No
* Custom configurations are available — see page 29 for instructions to have Tyco Electronics build your custom part.
Vertical Receptacles
Configuration *
1P/24S/1P
2P/24S/2P
3P/24S/3P
4P/24S/4P
4P/24S/3ACP
5P/24S/6P
6P/24S/6P
10P/24S/12P
3P
3ACP
4P
6P
7P
8P/28S
14P/32S
24S/6P
24S/3ACP
24S/8P
Part
Number
6450540-1
6450140-5
1-6450140-0
6450150-6
6450150-3
6450540-2
4-6450550-5
3-6450550-2
6450543-1
6450543-6
6450543-5
6450553-2
6450543-3
6450142-3
6450152-1
6450551-1
6450151-3
6450541-5
Application
SSI “DPS”
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
AC and DC Power + Signal
SSI “DPS”
Distributed DC Power + Signal
Distributed DC Power + Signal
DC Power
AC Power
DC Power
DC Power
DC Power
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
Overall
Length ′′ and [mm]
1.925′′ [48.90 mm]
2.250′′ [57.15 mm]
2.750′′ [69.85 mm]
3.350′′ [85.09 mm]
3.150′′ [80.01 mm]
4.350′′ [110.49 mm]
4.250′′ [107.95 mm]
5.800" [147.32 mm]
1.400′′ [35.56 mm]
1.550" [39.37 mm]
1.650" [41.91 mm]
2.050′′ [52.07 mm]
2.400′′ [60.96 mm]
3.350′′ [85.09 mm]
4.950′′ [125.73 mm]
2.750" [69.85 mm]
2.200" [55.88 mm]
3.250" [82.55 mm]
PCB Tail Type
(Solder, Press-Fit)
Press-fit
Solder
Solder
Solder
Solder
Press-fit
Press-fit
Press-fit
Press-fit
Press-fit
Press-fit
Press-fit
Press-fit
Solder
Solder
Press-fit
Solder
Press-fit
Power Contact
Sequencing
No
No
No
Yes
Yes
No
No
Yes
No
No
No
Yes
No
No
Yes
Yes
Yes
No
* Custom configurations are available — see page 29 for instructions to have Tyco Electronics build your custom part.
Note: All part numbers are RoHS compliant.
12
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector Systems (Continued)
Board-Mount Connectors
Right-Angle Plugs
1P/24S/1P
2P/24S/2P
3P/24S/3P
4P/24S/3ACP
3ACP/24S/6P
5P/24S/6P
5P/32S/5P
6P/24S/6P
8P/32S/8P
10P/24S/12P
16S/4P
24S/6P
24S/3ACP
3ACP
3P
4P
6P
7P
8P/28S
14P/32S
Part
Number
6450330-1
6450120-2
6450130-6
6450130-4
1-6450130-4
6450230-1
2-6450120-4
2-6450120-7
6450120-1
4-6450130-6
6450231-1
6450131-7
6450121-3
6450123-3
6450123-1
6450123-2
6450523-2
6450123-5
6450132-3
6450132-4
Application
SSI “DPS”
Distributed DC Power + Signal
Distributed DC Power + Signal
AC and DC Power + Signal
AC and DC Power + Signal
SSI “DPS”
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
AC Power
DC Power
DC Power
DC Power
DC Power
Distributed DC Power + Signal
Distributed DC Power + Signal
Overall
Length " and [mm]
1.925" [48.90 mm]
2.250" [57.15 mm]
2.750" [69.85 mm]
3.150" [80.01 mm]
3.650" [92.71 mm]
4.350" [110.49 mm]
3.950" [100.33 mm]
4.250" [107.95 mm]
5.450" [138.43 mm]
5.800" [147.32 mm]
2.050" [52.07 mm]
2.750" [69.85 mm]
2.200" [55.88 mm]
1.550" [39.37 mm]
1.400" [35.56 mm]
1.650" [41.91 mm]
2.050" [52.07 mm]
2.400" [60.96 mm]
3.350" [85.09 mm]
4.950" [125.73 mm]
PCB Tail Type
(Solder, Press-Fit)
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Solder
Press-fit
Solder
Solder
Solder
Board-to-Board Products
Configuration *
Signal Contact
Sequencing
Yes
No
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
No
N/A
N/A
N/A
N/A
N/A
Yes
Yes
* Custom configurations are available — see page 29 for instructions to have Tyco Electronics build your custom part.
Vertical Plugs
Configuration *
1P/16S/1P
1P/24S/1P
2P/16S/2P
2P/24S/2P
3P/16S/3P
3ACP/24S/3ACP
4P/24S/4P
5ACP/24S/5ACP
7P/32S/7P
24S/8P
3ACP
8P
Part
Number
6600333-9
6600330-4
1-6600333-0
1-6600333-2
6600333-7
1-6600333-1
6600333-6
6600333-1
6600330-5
6600323-2
6450503-3
6600303-1
Application
Distributed DC Power + Signal
SSI “DPS”
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
AC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
Distributed DC Power + Signal
AC Power
DC Power
Overall
Length " and [mm]
1.650" [41.91 mm]
1.925" [48.90 mm]
2.150" [54.61 mm]
2.250" [57.15 mm]
2.650" [67.31 mm]
3.150" [80.01 mm]
3.350" [85.09 mm]
4.350" [110.49 mm]
4.350" [110.49 mm]
3.250" [82.55 mm]
1.550" [39.37 mm]
2.650" [67.31 mm]
PCB Tail Type
(Solder, Press-Fit)
Press-fit
Solder
Press-fit
Press-fit
Press-fit
Press-fit
Press-fit
Press-fit
Solder
Press-fit
Press-fit
Press-fit
Signal Contact
Sequencing
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
N/A
N/A
* Custom configurations are available — see page 29 for instructions to have Tyco Electronics build your custom part.
Note: All part numbers are RoHS compliant.
13
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector Systems (Continued)
Board-Mount Connectors
Specifications
Performance Specifications
Materials
Up to 55 Amps per power contact,
de-rated to 35 Amps in equally energized (8 adjacent positions) connector.
Up to 4 Amps per signal contact,
de-rated to 1.5 Amps in equally
energized 24-position pin field.
Maximum Continuous Operating
Temperature — 105°C.
Contact Resistance — 0.7 milli-ohm
Durability — 250 cycle
Radial Mis-alignment Capability —
± 0.075″ [1.91 mm]
Minimum of 0.100″ [2.45 mm] of
contact wipe on shortest signal contact
Board-to-Board Products
Housing — High temperature thermoplastic, UL 94V-0
Power Contacts — High conductivity
Copper alloy
Signal Contacts — Copper alloy
Boardlocks — Phosphor bronze
Finish
Power and Signal Contacts —
30 microinches [.76 micrometers] min.
gold over 50 microinches [1.27
micrometers] min. nickel on mating
surfaces, 100 microinches [2.54
micrometers] min. tin over 50
microinches [1.27 micrometers] min.
nickel at PCB terminations
Note: Tin-lead plating also available on
press-fit connectors
Performance @ 30 Amps per Contact
30
Temperature Rise °C
TemperatureRise
Rise°CC
Temperature
80
70
60
50
40
30
20
10
25
20
15
10
5
0
0
1
0
5
10
15
20 25 30 35 40 45
Current per Contact (Amps)
1 Contact
8 Adjacent Contacts
50
55
2
4
6
8
10
Power Contacts on .250" [6.35mm]
See Cable Connectors on Pages 19-28
14
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
“NEW” MULTI-BEAM XLE Connectors
NEW
Product Facts
Two NEW hot-pluggable
power contacts to choose
from:
■ 50 Amp high power
contact
■ 20 Amp low power
contact
■
Over 35% lower mating
force than original
MULTI-BEAM XL connectors
■
Over 40% more current in
the same over all PCB space
■
Low-wear contact design
passes Telcordia
environmental exposure
requirements
■
New design allows more
angular mis-alignment
Board-to-Board Products
■
Tyco Electronics’ new
MULTI-BEAM XLE connectors are the latest addition
to the MULTI-BEAM XL
power connector product
family. MULTI-BEAM XLE
connectors feature a new
3-beam contact, made from
a thicker/higher conductivity material than the original
single beam or 4-beam
designs.
The new 3-beam design
allows for a greater angular
mis-alignment between mating connectors and offers
a lower mating force. In
addition, MULTIBEAM XLE
connectors offer a slimmer
housing design that
reduces the overall PCB
footprint and has the
option of using a low power
contact — the industry
proven Universal Power
Module (UPM) contact.
Applications
The new contacts and
housing design allows
more power in the same
footprint — over 35% more
current in the same space.
MULTI-BEAM XLE connectors are as modular as the
original MULTI-BEAM XL
connectors in that they can
be designed to fit specific
customer needs.
Equipment
■
■
■
■
■
Modular Hot-Swappable
Power Supplies
1U / 2U Servers
High-end Computer &
Telecommunications
Power Distribution Circuit
Boards
Power Distribution Cable
Assemblies
15
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
“NEW” MULTI-BEAM XLE Connectors (Continued)
Specifications
Materials
Part Number 6450830-2
Right-Angle Plug
Board-to-Board Products
Housing — High temperature thermoplastic, UL 94V-0
Power Contacts — High conductivity
Copper alloy
Signal Contacts — Copper alloy
Boardlocks — Phosphor bronze
Part Number 6450880-1
Right-Angle Receptacle
2.530 ± .100
[64.26 ± 2.54]
Finish
Power and Signal Contacts —
30 microinches [.76 micrometers] min.
gold over 50 microinches [1.27
micrometers] min. nickel on mating
surfaces, 100 microinches [2.54
micrometers] min. tin over 50
microinches [1.27 micrometers] min.
nickel at PCB terminations
.820
[20.83]
.470
[11.94]
.930
[23.62]
MULTI-BEAM XLE Connector Part Numbers
Available
Configurations
1P/24S/1P
2LP/8S/2LP
6LP/24S/3P
2P/32S/2LP
2P/24S/2P
3P/245/3P
3P/32S/3P
32S/4LP
6LP/24S/10P
12P/48S/8LP
4ACP/48S/12HDP
Right-Angle
Plugs
6450840-7
6450830-1
6450830-2
6450830-4
6450830-5
6450830-9
6450820-3
6450831-1
1-6450830-0
6450840-3
6450840-4
Part Numbers
Vertical
Plugs
6450820-2
—
—
—
—
—
—
—
—
—
6450810-1
Overall Length
of Plug
1.54′′ [39.12 mm]
1.175′′ [29.84 mm]
2.555′′ [64.89 mm]
2.020’ [51.30 mm]
2.040′′ [51.81 mm]
2.54′′ [64.52 mm]
2.79′′ [70.87 mm]
1.750′′ [44.45 mm]
3.86′′ [97.92 mm]
5.600′′ [142.24 mm]
5.390′′ [136.90 mm]
Mating Part Numbers
Right-Angle
Vertical
Receptacle
Receptacle
6450870-5
6450850-3
—
6450860-1
6450880-1
6450850-2
6450870-1
—
6450870-3
—
6450870-4
—
6450870-8
—
6450871-1
—
—
6450860-5
6450880-4
6450860-3
6450880-3
6450860-2
Electrical
Current Carrying Capacity:
■ 50 Amp high power contact (over 35% increase compared to MULTI-BEAM XL product)
■ 20 Amp low power contact (occupies 50% PCB space than MULTI-BEAM XL power contact)
Contact resistance: 0.7 milliohm per contact at rated current
Configuration Description
ACP
.300′′ [7.62 mm] spacing
300 Volts
P
.250′′ [6.35 mm] spacing
200 Volts
HDP
.200′′ [5.08 mm] spacing
50 Volts
LP
.115′′ [2.92 mm] spacing
200 Volts
S
.100′′ [2.54 mm] spacing
50 Volts
ACP indicates the high power contact on 300 VAC spacing.
P indicates the high power contact on 200 VDC spacing.
LP indicates the low power contact on 200 VDC spacing.
S indicates the signal contact on 60 VDC spacing.
Application Tooling
Right-Angle Plugs:
Flat-rock seating tools (no unique tools required)
Right-Angle Receptacles:
Flat-rock seating tools (no unique tools required)
Vertical Plugs:
Contact Tyco Electronics for required seating tools
Vertical Receptacles:
Flat-rock seating tools (no unique tools required)
Note: All part numbers are RoHS compliant.
16
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Current Pass-Thru
Power Distribution Connector System
Product Facts
Combines PCB and cable
mounted contacts
■
Ideal for separating AC input
from DC input
■
Eliminates FASTON tab
interface at the back of the
connector housing
■
Requires less space than
two housing designs
■
Terminates 12 AWG and
10 AWG wire
■
Mates with Tyco Electronics
vertical and right-angle
PCB plugs
■
High strength housing
materials
■
RoHS Compliant
Technical Documents
Product Specification
108-1973 and 108-2157
Application Specification
114-13038
Board-to-Board Products
■
The Cable Pass-Thru
MULTI-BEAM XL receptacles securely terminate up
to a 10 AWG wire directly
into MULTI-BEAM XL PCB
mounted receptacles. The
design includes a “terminal
position assurance” (TPA)
feature that confirms the
manually inserted wires are
fully seated. The product
offers a unique way of
using the MULTI-BEAM XL
PCB receptacles as a sort
of “docking” connector.
A single docking connector
is far easier to mate to and
to design around in a blindmate application, than
multiple power and signal
connectors. By separating
some circuits to be cable
terminated and some to be
PCB terminated it allows
both high voltage (AC) and
low voltage (DC) power
to pass through the same
connector.
This separation of the AC
and DC power eliminates
the concerns of high voltage power running through
circuit boards better suited
to carry only low voltage
circuitry. Additional
applications may include
designs where the power
is better routed directly to
a different PCB, through
cables, yet passes through
a single docking connector
for ease in system design.
The Cable Pass-Thru
connector is offered in both
right-angle or vertical PCBmount orientations and is
supplied with either pressfit or solder pc tails. The
connector is mate-able to
either PCB mounted or cable
mounted MULTI-BEAM XL
or MULTI-BEAM XLE plugs.
All MULTI-BEAM XL cable
connectors are supplied
pre-assembled by
Tyco Electronics.
17
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Current Pass-Thru
Power Distribution Connector System (Continued)
Available
Configurations
Board-to-Board Products
3CP/1P/24S/2P
3CP/24S/2P
3CP/24S/3ACP
3CP/4P/24S
3ACP/24S/6P
3CP/8P/12S
3CP/20S/10P
3CP/16S
Part Numbers
Pass-Thru
Mating
Pass-Thru
Right-Angle Receptacles Right-Angle Plugs Vertical Receptacles
6450178-1
6450130-2
—
6450178-2
2-6450130-6
—
1888179-1
2-6450330-6
—
6450578-1
1-6450132-3
6450558-1
—
1-6450130-4
6450558-2
1888132-1
—
—
6450578-2
6-6450130-2
—
6450668-1
6450622-1
—
Mating
Vertical Plugs
—
—
—
6600310-5
—
—
—
—
Note: Receptacles are the only MULTI-BEAM XL parts with Pass-Thru capability.
Configuration Description
CP
ACP
P
HDP
High
Density
AC Power
AC Power
DC Power
Power
Cable Power PCB-Mount PCB-Mount PCB-Mount
.300" spacing .300" spacing .250" spacing .200" spacing
S
Signal
PCB-Mount
.100" grid
MULTI-BEAM XL Coax Pass-Thru Connector —
Combine power, coax and signal all in one connector
Right-Angle Plug
292495-1
Cable Receptacle
292491-1
The following coax contacts may be used with the
coax pass-thru housings:
Pin Contact
5221980-5
Socket Contact
5221981-5
Note: All part numbers are RoHS compliant.
18
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Receptacle Assemblies
Cable Receptacle
Assemblies
Product Facts
Single one-piece housing
design
■
Terminal Position
Assurance (TPA) Secondary
Locks on contacts help
prevent contact back-out
■
Pre-assembled made-toorder cable assemblies
■
Installation to panel
provides float in X, Y and Z
directions
■
Insulation crimp on all
contacts
■
30 microinch (.76 micrometers) gold plated
contacts for high reliability
■
Touch-safe design passes
UL1977 and IEC 60950
finger probe test
■
AC and DC power in the
same connector —
meets UL & IEC safety
requirements
■
All MULTI-BEAM XL
products in this section are
RoHS compliant
Board-to-Board Products
■
MULTI-BEAM XL Cable
Assemblies allow designers
freedom to connect power
supplies and power
distribution subassemblies
in a wide variety of
applications. Expanding
beyond board-to-board
applications the cable
assemblies are available for
both cable-to-board or
panel-mount applications
and can terminate 8-16
AWG and 22-26 AWG wires
all in one connector, without
using adapter circuit
boards. In addition, the
power contacts are
designed to be able to
accept two-wire terminations
which can further reduce
harness complexity by
reducing or eliminating
mid-wire splices.
The use of high temperature
glass filled housing materials,
redundant contact retention
and high conductivity
contact materials allows
the use of this connector in
very high current density
applications. The features
work together to result in a
highly durable and compact
power connector, which
offers industry leading
minimum millivolt drop
through the connection. The
connector was designed to
pass the UL 1977 and IEC
60950 finger probe test
which makes the connector
touch-safe. The insulation
crimp adds further safety
by keeping the insulation
from being pulled away
from the termination point.
These features eliminate the
Technical Documents
For More Information
Product Specification
108-2157
Application Specification
114-13112
Internet http://tycoelectronics.com
need for a secondary cable
clamp which often can be
size prohibitive.
The cable connectors
are designed to mate to
the de-facto standard
Tyco Electronics
MULTI-BEAM XL right-angle
or vertical PCB plugs. The
combination of PCB and
cable connections, both
with mixed power
and signal arrangements
provides a universal power
distribution connector
systems.
The cable assemblies are
all RoHS compliant,
designed to specific
customer requirements
and manufactured in
Tyco Electronics’ cable
assembly manufacturing
facilities.
Check out product information at: http://mbxl.tycoelectronics.com
Technical Support Center 1-800-522-6752
19
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Receptacle Assemblies (Continued)
Configurations/Applications
Board-to-Board Products
Floating XYZ Panel-Mount
Receptacle
Floating XYZ Panel-Mount Cable Receptacle
(2P + 24S + 2P)
Wires
Secondary Locks on
Signal Contacts
Secondary Lock
(1 Per Power Contact)
Housing
• 0.060" [1.52] Nominal Float in X, Y
and Z direction
• For modular installation of large
power distribution systems
• Single connector replaces multiple
power and signal connectors
Panel Alignment
Key
Power
Circuitry
Signal
Circuitry
Guide Post
(2 Places)
Mounting Hole
(2 Places)
XYZ Series
Slide-to-Lock Cable Receptacle
(3 ACP)
Slide-to-Lock Receptacle
• 0.030" [0.76] nominal float in X and
Y direction
• Ideal for modular installation of
smaller systems requiring less space
and less float — such as fan trays
• Replaces connectors which use
multiple low power contacts to carry
the total current
• Power only or Power Plus signal
mixed
Secondary Lock
(1 Per Power Contact)
Wires
Spring
Latch
Panel
Stop
Locking
Tab
Housing
Panel Alignment
Key (2 Places)
Power
Circuitry
Guide Post
(2 Places)
STL Series
Squeeze-to-Release Cable Receptacle
(2P + 24S +2P)
Cable-to-Board Receptacle
• Easy to mate/disconnect with
squeeze-to-release latches
• Mates to right-angle or vertical
MULTI-BEAM XL STR plugs
• Replaces two traditional connectors
(1 signal and 1 power) with just
1 connector
Secondary Lock
(1 Per Power Contact)
Wires
Secondary Locks on
Signal Contacts
Housing
Power
Circuitry
Squeeze Latch
(2 Places)
Signal
Circuitry
Mating Alignment
Key (2 Places)
STR Series
20
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Receptacle Assemblies (Continued)
Panel-Mount Receptacles
Product Facts
High strength glass-filled
housing materials
■ Expandable/modular
housing design
■ PMT Series floats
+/- 0.060" [1.52] in X, Y and
Z directions
■ STL series floats 0.030"
[0.76] in X and Y directions
■ Mounting Hardware Kits:
Part Number 1600914-1 —
Standard
Part Number 1600914-3 —
High Force
■
Slide-to-Lock Receptacle
Power and Signal Module Specifications
Power Module Widths:
Part numbers shown identify the
main receptacle connector housing.
Additional components (contacts,
contact locks, etc.) are used to
complete the cable assembly.
See page 23 for contacts,
secondary locks and application
equipment information.
Board-to-Board Products
X, Y, Z Floating Receptacle
Module Designation
0.300 [7.62] (ACP)
0.250 [6.35] (P)
0.200 [5.08] (HDP)
300 (ACP)
250 (P)
200 (HDP)
Signal Module Width
Maximum Wire Size
AWG [mm2]
8 [10.5]
10 [6.6]
12 [2.6]
Wire Range
AWG [mm2]
22-26 [0.14-0.32]
Module Designation
0.200 [5.08] (8 Contacts)
Signals
Power Module
Max. Insulation Dia.
inches [mm]
0.272 [6.91]
0.215 [5.46]
0.156 [3.96]
Insulation Range
inches [mm]
0.036-0.054 [0.91-1.37]
Signal Module
Configurations/Part Numbers
Part Numbers
Available
Configurations
3ACP
4P
4ACP
5P
6P
1P/16S/1P
1P/24S/1P
2P/16S/2P
2P/24S/2P
3P/16S/3P
3ACP/24S/3ACP
4P/24S/4P
4ACP/24S/12P
5ACP/24S/5ACP
7P/48S/7P
XYZ
Series
1600606-2
—
—
1600606-1
—
1-1600636-3
1600636-9
1-1600636-0
1600636-2
1600636-8
1-1600636-4
1-1600636-5
1600636-6
1600636-1
1-1600636-6
STL
Series
292499-1
292499-4
292499-3
1761419-2
292499-8
1761819-4
—
—
1761819-2
—
—
—
—
—
—
Mating PCB Plugs
Vertical
Right-Angle
6600303-7
6450123-3
6600303-2
6450123-2
6600303-3
—
—
6450123-6
6600303-6
—
6600333-9
—
6600330-4
6450330-1
1-6600333-0
—
6600333-5
1-6450330-4
6600333-7
—
1-6600333-1
—
6600333-6
—
—
2-6450120-6
6600333-1
5-6450130-0
—
3-6450120-4
Note: All part numbers are RoHS compliant.
21
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Receptacle Assemblies (Continued)
Cable-to-Board
Squeeze-to-Release
Receptacles
Squeeze-to-Release Cable Receptacle
(2P + 24S +2P)
Secondary Lock
(1 Per Power Contact)
Wires
Board-to-Board Products
Product Facts
High strength glass-filled
housing
■ Pre-installed squeeze-torelease latches
■ Expandable/modular
housing design
■ Mates to Tyco Electronics
vertical or right-angle
PCB plugs
■
Housing
Squeeze Latch
(2 Places, pre-installed)
Power
Circuitry
Signal
Circuitry
Mating Alignment
Key (2 Places)
STR Series
Power and Signal Module Specifications
Technical Documents:
Power Module Widths:
Product Specification
108-2157
Application Specification
114-13112
0.300 [7.62] (ACP)
0.250 [6.35] (P)
0.200 [5.08] (HDP)
Module Designation
300 (ACP)
250 (P)
200 (HDP)
Signal Module Width
Module Designation
0.200 [5.08] (8 Contacts)
Signals
Maximum Wire Size
AWG [mm2]
8 [10.5]
10 [6.6]
12 [2.6]
Wire Range
AWG [mm2]
22-26 [0.14-0.32]
Max. Insulation Dia.
inches [mm]
.272 [6.91]
.215 [5.46]
.156 [3.96]
Insulation Range
inches [mm]
.036-.054 [0.91-1.37]
See page 23 for contacts,
secondary locks and application
equipment information.
Power Module
Signal Module
Configurations/Part Numbers
Available
Configurations
2ACP
3P
3ACP
4P
6P
1P/24S/1P
2P/8S/2P
2P/16S/2P
2P/24S/2P
3ACP/24S/3ACP
4P/24S/4P
4ACP/24S/4ACP
6P/24S/6P
6P/32S/6P
STR
Series
1600798-2
1600798-3
1600798-5
1600798-4
1600798-1
1600788-8
1-1600788-3
1-1600788-0
1600788-1
1-1600788-2
1-1600788-4
1-1600788-5
1-1600788-7
1600788-7
Part Numbers
Mating PCB Plugs
Vertical
Right-Angle
6600393-1
6450129-1
6600393-2
6450129-2
—
—
6600390-1
6450129-3
6600393-3
6450129-5
6600380-2
6450128-1
—
6450128-6
6600383-5
—
6600383-3
6450128-2
6600383-6
—
6600383-7
6450128-5
6600383-9
—
—
6450128-8
6600383-1
—
Note: All part numbers are RoHS compliant.
22
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Receptacle Assemblies (Continued)
Cable Receptacle
Components
Material and Finish
Power Contact
Technical Documents
Product Specification
108-2157-1
Application Specification
114-13164
Board-to-Board Products
Body — 50 micro inches nickel over
high conductivity copper alloy
Mating Area — 30 micro inches gold
Power Contacts
Wire Size Range
AWG
12
14
2 @ 16
Wire Size Range
AWG
8
10
2 @ 12
2 @ 14
Insulation
Diameter
.156 Max..
[3.96]
.156-.176
[3.96-4.47]
.120-.156
[3.05-3.96]
.090
.
[2.29] Max.
Housing
Width
.200 or .250
[5.08 or 6.35]
.250
[6.35]
.200 or .250
[5.08 or 6.35]
.250
[6.35]
Insulation
Diameter
.215-.272
[5.46-6.91]
.176-.215
[4.47-5.46]
.130
.
[3.30] Max.
.137
.
[3.48] Max.
Housing
Width
.300
[7.62]
.200 or .300
[6.35 or 7.62]
.300
[7.62]
.300
[7.62]
Part Number
Applicator Tool
Hand Tool
1385635-3
1-1600961-7
(make-first-break-last)
1-1600961-8
(Standard)
1385636-3
2063500-1
1385635-3
1385636-3
Part Number
Applicator Tool
Hand Tool
1385637-3
1-1600960-7
(make-first-break-last)
1-1600960-8
(Standard)
1385638-3
N/A
1385637-3
1385637-3
Extraction Tool: Part Number 2063080-1
Note: Check the customer drawing for the applicable MULTI-BEAM XL housing to confirm the quantity of standard or
make-first-break-last contacts needed. Standard and make-first-break-last contacts cannot be interchanged
within the housing.
Power Contact Secondary Lock
Part Number 1600903-1
Secondary Power Locks:
Part Number 1600903-1
Note: One secondary lock needed for each power contact.
SDA SA Hand Tool
Part Number 2063500-1
Note: All part numbers are RoHS compliant.
23
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Receptacle Assemblies (Continued)
Cable Receptacle
Components (Continued)
Insulation Barrel
Material and Finish
Wire Barrel
Board-to-Board Products
Contact — Phosphor bronze plated
gold over nickel in mating area
Locking Lance
Signal Contacts
Wire Size Range
AWG
22-26
Insulation
Diameter
.036-.054
[0.91-1.37]
.036-.054
[0.91-1.37]
Version
Part Number
Low Pressure
5531216-5 (reel)
High Pressure
5531224-6 (reel)
Extraction Tool
Hand Tool
Applicator
91156-2
91531-1
1426685-2
Secondary Locks
Note: One secondary lock needed
for each column of signal
contacts
Secondary Signal Locks:
Part Number 1600902-1
Panel Mount
Alignment Key
Float-Mount Hardware Kit
Part Number 1600914-1
(Standard Force)
Part Number 1600914-3
(High Force)
1 Kit / Cable Assembly;
Kit includes 2 screws, 2 washers
and 2 springs
Note: Kit not needed for STR or
STL housings
CERTI-CRIMP Hand Tool
Part Number 91531-1
Note: All part numbers are RoHS compliant.
24
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Receptacle Assemblies (Continued)
Specifications
Installed Connector Illustration
Product Specifications
Power Contacts —
50 Amps on single 8 AWG wire
Signal Contacts —
5 Amps on single 22 AWG wire
0.050" [1.27] minimum float in X,
Y and Z direction
Sequenced Mating —
3 Levels Pwr/Grnd, Pwr & Signal,
Signal 250 Cycle Durability
PC Board RightAngle Plug
Assembly
Shoulder of
Shoulder Screw
Bottomed on Panel
Singular
Fasteners
Board-to-Board Products
Panel Stop Must be
Against Back of Panel
Connectors
Fully Mated
Shoulder
Receptacle In
Front of Panel
Spring Latch Must Be
Engaged to Panel
Compression Spring
and Flat Washer
Installed onto
Shoulder Screw
XYZ Series
STL Series
Connectors
Fully Mated
PC Board RightAngle Plug
Assembly
Shoulder Latch
Engaged to Latch
Receiver of Mating
Plug Assembly
STR Series
Additional temperature-rise
data available, contact
Tyco Electronics Product
Engineering.
MULTI-BEAM XL Product T-Rise Data
Current/temperature rise
data shown — from End-OfLife qualification test.
For more information see the product website @ http://mbxl.tycoelectronics.com
25
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Plug Assemblies
Board-to-Board Products
Cable Plug Assemblies
Product Facts
■
High strength housing
materials
■
Hot-Pluggable
■
Installation provides float in
X, Y and Z directions
■
Sequenced mating
■
RoHS complaint
■
Modular mold design
provides configuration
flexibility
■
Integral cable clamp
supports contacts and
provides strain relief in
minimum amount of space
■
30 microinch (0.76
micrometers) gold plated
contacts for high reliability
■
Sold only as part of a
pre-assembled cable
assembly
The newest addition to the
MULTI-BEAM XL cable
assemblies are the cable
mounted plugs. Produced
with modular molds, the
connectors can be made
in a wide variety of sizes.
The PCB mounted
MULTI-BEAM XL plugs are
typically rigidly mounted
to hot-swappable power
supplies and the systems
they connect with. The
“float blind-mate drawer
connector” design of the
MULTI-BEAM XL cable
connectors helps eliminate
the concern of an inadequately aligned chassis.
The connector can accept
mating parts misaligned
by as much as 3 mm
(± 1.5 mm), and still mate
without applying stress
to solder or complaint
pin terminations. The
MULTI-BEAM cable plugs
can terminate 8-14 AWG
and 22-26 AWG wires all
in one connector, without
using adapter circuit
boards. The use of high
temperature glass filled
housing materials, redundant contact retention and
high conductivity contact
materials allows the use of
this connector in very high
density applications.
The cable assemblies
are all RoHS compliant
designed to specific
customer requirements
and manufactured in
Tyco Electronics’ internal
cable assembly manufacturing facilities.
Technical Documents
Product Specification
108-2157-1
Application Specification
114-13164
For More Information
Internet
http://tycoelectronics.com
Check out product
information at:
http://mbxl.tycoelectronics.com
Technical Support Center
1-800-522-6752
26
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Plug Assemblies (Continued)
Configurations/
Part Numbers
Board-to-Board Products
PMT
Power Module Widths:
0.300″ (ACP)
0.250″ (P)
0.200″ (HDP)
Signal Module Width:
0.200″ (8 Contacts)
STL
Module
Designation
STR
Maximum Wire Size
AWG
mm2
300 (ACP)
8
10.5
250 (P)
10
6.6
200 (HDP)
12
2.6
Module
Designation
Signals
Maximum Wire Size
AWG
mm2
22–26
0.14–0.32
Configuration
PMT
Series
Plug
STL
Series
Plug
3 ACP
4P
1P/16S/1P
1P/24S/1P
2P/24S/2P
3ACP/24S/3ACP
—
—
1600236-5
1600236-4
1600236-6
1600236-7
1761421-1
1761421-3
1600820-2
1600820-1
1600820-3
1600820-4
Max.
Insulation Dia.
.272
6.91
.215
5.46
.156
3.96
Max.
Insulation Dia.
.036–.054
0.91–1.37
Mating Receptacles*
Vertical
Right-Angle
6450543-6
6450543-5
—
6450540-1
5-6450540-9
4-6450550-1
6450173-1
—
2-6450170-0
6450160-3
2-6450170-1
2-6450170-2
STR
Series
Plug
Mating
Receptacles
Vertical
—
1600814-2
1600238-4
1600238-3
1600238-5
1600238-6
—
—
6450740-4
6450740-5
6450740-6
6450740-7
PMT Series — Panel-Mount with total 3 mm float in X,Y and Z directions
STL Series — Panel-Mount with total 1.5 mm float in X and Y directions
STR Series — Squeeze-to-Release for removeable Cable-to-Board / I/O Applications
*Specifications on mating PCB mountable receptacles:
Product Specification 108-2157-1
Application Specification 114-13164
Note: All part numbers are RoHS compliant.
27
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Plug Assemblies (Continued)
Connector Styles
PMT (Panel-Mount) for True
X, Y, Z Floating
■ Single-piece contact
design — eliminates multiple contact interfaces
■ Insulation crimp on all
contacts
■ Installation to panel
provides float in X, Y and
Z directions
Board-to-Board Products
Intermateable with
Tyco Electronics
MULTI-BEAM XL PCB
mounted receptacles
Specifications
Wire Gauge — 8 AWG – 14 AWG
Sequenced Mating — 3 Levels:
Pwr/Gnd, Pwr & Signal, Signal
Current Carrying Capacity —
Power Contacts — 45 Amps* on single
8 AWG wire
Signal Contacts — 4 Amps on single
22 AWG wire
Durability — 250 Cycle
Temperature Range —
40°C – 105°C
Float — 1.5 mm float in X, Y, and Z
Direction**
RoHS Compliant
UL, CSA, VDE Approvals Pending
*Based on End-of-Design Life
Qualification Tests
**Mated to Tyco Electronics
MULTI-BEAM XL receptacles only
STL (Slide-to-Lock) —
Most Economical — Still
Offering X and Y Floating
■ Single-piece contact
design — eliminates multiple contact interfaces
■ Insulation crimp on all
contacts
■ Installation to panel
provides float in X and Y
directions
STR (Squeeze-to-Release) —
To Connect Sub-assemblies
■ Single-piece contact
design — eliminates multiple contact interfaces
■ Insulation crimp on all
contacts
■ Easy to mate/disconnect
with squeeze-to-release
latches
■
■
Offered as pre-assembled, fully tested cable assemblies,
as shown below
Combines multiple power and signal connectors into a
single Power I/O Connector
MULTI-BEAM XL Cable
Plug T-Rise Data*
28
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTI-BEAM XL and MULTI-BEAM XLE Connectors Custom Configuration Worksheet
PCB-Mount
Cable-Mount
D
C
B
A
1
2
Hold
Down
1 2 3 4 5 N
N
1
2
B
A
4
3
N
Plugs
XYZ Floating
XYZ Floating
Slide-to-Lock
Squeeze-toRelease
Mounting
Hole
C
Header/Plug (Right-Angle Shown)
N
3
1
2
N 5 4 3 2 1
N
2
3
B
C
Board-to-Board Products
D
C
B
A
1
A
Receptacle (Vertical Shown)
Electrically Hot
To create a unique configuration for MULTI-BEAM connectors simply complete this worksheet and forward it to your Tyco Electronics sales engineer.
1. Performance Grade
MULTI-BEAM XL Connector
MULTI-BEAM XLE Connector
2. Application
Board-to-Board
Cable-to-Board
3. Gender
Plug (Male)
4. Orientation
5. Termination
Receptacle (Female)
Cable Only
Blind-Mate specify Floating or Slide-to-Lock Receptacle
PCB Only
Right-Angle
(Cable Only)
6. Termination Style (PCB Only)
Latching
Vertical
Power
8 AWG
10 AWG
12 AWG
Signal
22 AWG
24 AWG
26 AWG
Solder Tail .135′′ [3.43 mm]
Solder Tail .165′′ [4.19 mm]
14 AWG
Press-Fit .120′′ [3.05 mm]
Press-Fit .135′′ [3.43 mm]
Press-Fit .165′′ [4.19 mm]
7. Mounting to PCB
Hold Downs (one on either end)
.122′′ [3.10 mm] Mounting holes (Accepts #4 screws, right-angle connectors only)
.150′′ [3.81 mm] Mounting holes (Accepts #6 screws, right-angle connectors only)
8. Select # of Contacts
___ Enter Power Contact Type (LP - Low Power, HP - High Power)
___ Enter # of Power Contacts (Loaded with standard length Power Contacts)
___ Enter the position(s) to be loaded with Pre-mate contact (Receptacles only)
(Mate-First-Break-Last) ( i.e. #1,#3, etc.)
Contact Centerline Spacings:
.200′′ [5.08 mm] (for High Power only)
.250′′ [6.35 mm] (for High Power only)
.300′′ [7.62 mm] (for High Power only)
Section B: (Signal Contacts) ___ Enter # of Signal Contacts (Multiples of 8 are standard, i.e. 16, 24, 32...)
___ Enter the positions with Post-Mate Contacts (Mate-Last-Break-First, Plugs only)
Note: Row A is standard (i.e. A1, A3, etc.)
Section C: (Power Contacts) ___ Enter Power Contact Type (LP - Low Power, HP - High Power)
___ Enter # of Power Contacts (Loaded with standard length Power Contacts)
___ Enter the positions to be loaded with Pre-Mate Contacts (Receptacles only)
(Mate-First-Break-Last, i.e. #1, #3, etc.)
Contact Centerline Spacings:
.200′′ [5.08 mm] (HDP)
.250′′ [6.35 mm] (P)
.300′′ [7.62 mm](ACP)
Section A: (Power Contacts)
9. Additional Requirements
10. Customer Information
Name: __________________________ Company: ____________________ Location: ________________________
Phone: __________________________ Fax: __________________________________ e-mail:_________________________
(Submit to your local Tyco Electronics Sales Engineer)
MULTI-BEAM XL, MULTI-BEAM XLE, TE (logo) and TYCO ELECTRONICS are
trademarks of the Tyco Electronics group of companies and its licensors.
29
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MINIPAK High-Density Board-to-Board Power Connectors
Board-to-Board Products
Product Facts
■
High current per linear inch
■
Various configurations to
meet requirements using
less board space
■
Built-in alignment feature
■
Shrouded insulator design
■
Meets safety regulatory
requirements
■
All MINIPAK products in this
section are RoHS compliant
Typical Applications
■
Telecom and computer
applications
■
Routers
■
Servers, mini and
supercomputers
■
Removable battery packs
■
Uninterruptible power
systems (UPS)
■
Hot-swap N+1 power
distribution
MINIPAK connectors are a
family of board-to-board
power connectors designed
to deliver more current
using less board real
estate.
Product Varieties
This product family includes
MINIPAK high-density
power connectors, which
are custom configurable
and offer a combination of
alignment guides, signal
contacts, and DualBlade
power contacts to meet
different requirements.
Following the PICMG µTCA.0
Standard, the MINIPAK HD
connector is also available
in this product line and is
ideal for hot-plug telecommunications applications.
With a two-row configuration, the MINIPAK HDE
connector, designed to
serve in both PCB-to-PCB
and backplane power
systems, occupies minimal
PCB edge space. For
applications needing a
low profile solution,
Tyco Electronics offers
MINIPAK HDL, a blindmateable board-to-board
connector, which stands
only 8 mm off the edge of
the printed circuit board.
Wide Selection of
Configurations
MINIPAK connectors are
available in numerous configurations. Which MINIPAK
connector is most suited to
your application will depend
on requirements such as AC
input current and voltage,
DC output currents and
voltages, board-mount
style, and available board
space. Tyco Electronics
will work with you to help
determine the best solution
to your application and can
custom tool MINIPAK configurations if needed.
30
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MINIPAK High-Density Board-to-Board Power Connectors (Continued)
MINIPAK High-Density Power Connectors
32 Amps per contact, fully loaded
■
Features an innovative Dual Blade contact that allows splitting
4.5 mm pitch contacts into multiple voltage rails
■
Various alignment guides, signal contacts, and power contacts
available to use on 4.5 mm, 6.0 mm, and 7.5 mm pitches
Board-to-Board Products
■
MINIPAK HDL Connectors
■
High density blind-mateable connector
■
Low profile-stands just 8.0 mm off the PCB
■
Solder and press-fit tails available
■
Current rating of 16A
■
Low contact resistance with mating forces less than 0.3lbs per
contact
MINIPAK HD Connectors
■
Designed to the PICMG MicroTCA.0 Standard
■
Combines 24 power contacts and 72 high density signal
contacts
■
Rugged contact design helps provide long-term reliability
■
Hot-plug design controls arc during hot mate/unmate cycles
■
3 mating levels
MINIPAK HDE Connectors
■
Very high current density
■
Two row configuration saves PCB space
■
Two levels of contact sequencing available for mate-firstbreak-last operation
■
Uses a hot-plug contact approved by UL for current interrupt
applications
31
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
Board-to-Board Products
MINIPAK High-Density Board-to-Board Power Connectors (Continued)
Part Number
Right-Angle PCB Plug
No. 30A
No. 15A
Signal
Pwr
Pwr
Contacts
Tails
6651672-2
3
2
6
Solder
6651670-1
3
2
24
Solder
6651742-1
8
12
58
Solder
6651668-1
21
0
24
Solder
6651380-1
6
5
36
Solder
Mating Pair
Overall
Length
1.38
35.00
2.87
73.00
3.78
96.00
5.71
145.00
4.50
114.50
Vertical PCB Receptacle
Mating
Part Number
Tails
Special Feature
6651673-1
Compliant Press-Fit
DualBlade
6651671-1
Compliant Press-Fit
DualBlade
6651743-1
Compliant Press-Fit
Stacked
6651669-1
Compliant Press-Fit
—
6651381-2
Compliant Press-Fit
DualBlade
*The remaining power contacts are 30 Amps each
DualBlade Contact
DualBlade Contact provides two
15 Amp contacts in the space of
one 30 Amp contact
DualBlade Contact
Housing Assembly
Stacked MINIPAK Connector
Co-Planar Stacked MINIPAK Connector
Part Number
Right-Angle PCB Plug
No. 30A
No. 15A
Signal
Pwr
Pwr
Contacts
1766056-1
2
6
36
Right-Angle PCB Receptacle
Tails
Mating Pair
Overall
Length
Mating
Part Number
Tails
Special Feature
Solder
1.55
39.30
1766057-1
Solder
Stacked
Custom MINIPAK Connector
Configurations
If the standard MINIPAK
connector configuration
does not meet your
application requirements,
Tyco Electronics may be
able to tool a custom
MINIPAK connector solution
depending on your requirements and production
volume. Please consult
Customer Service for
details.
Note: All part numbers are RoHS compliant.
32
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MINIPAK High-Density Board-to-Board Power Connectors (Continued)
Material
Insulators
Socket contacts
Signal pins
Power blades
Plating
Contacts
Terminals
Environmental/Mechanical
Connector operating temperature range
Mating forces
PPA, UL 94V-0 flammability rated, color black
Phosphor bronze alloy
Brass alloy
Copper alloy
Board-to-Board Products
Selective 30 microinches gold over nickel
Tin over nickel
-40°C to +130°C
Power: 1.5lb/contact typical
Signal: 0.2lb/contact typical
Electrical
Contact current rating
Voltage ratings
Insulation resistance
Dielectric strength
Individual power contact: 65A max.1
AC Power: 125/250VAC, signal & DC power: up to 60V
5000Ω at 500V DC for 2 minutes, per MIL-STD 1344, Method 3003
Power 1,500VAC, signal 250VAC; for 1 minute, per MIL-STD 1344, Method 3001
1 This is the UL rating for an individual power contact. Current rating for any given configuration with multiple contacts will depend on contact layout, quantity
and spacing.
Contact Current Ratings
100
The graph to the right shows the current carrying capabilities of an individual power contact,and that of multiple
contacts at 4.5, 6.0 and 7.5 mm contact spacing.
80
MINIPAK connectors have been evaluated and found to
comply with the UL1977 standard and the CSA standard
C22.2 No.182.3-M1987. Tyco Electronics will work with
customers to obtain application-specific regulatory certifications if needed.
1
2
3
4
Individual contact
4.5 mm contact spacing
6.0 mm contact spacing
7.5 mm contact spacing
60
1
50
40
30
20
10
®
C
TEMPERATURE RISE (°C)
70
Safety Regulatory Agency Compliance
2
3
4
90
US
0
20A
40A
30A
50A
60A
CURRENT (A)
Connector Mounting
Termination Tails
PC Board
Surface Ref.
.160 – .200
[4.06 – 5.08]
A
PC Board
Surface Ref.
.106
[2.68]
Compliant Press-fit
for .093" min. thick PCB
Solder Tail
Mating Condition
Dimension “A”
Long Tail
Short Tail
.180 ± .020
.120 ± .020
4.57 ± 0.51
3.07 ± 0.51
1.000
[25.40]
33
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
“NEW” MINIPAK HDL Connectors
NEW
Board-to-Board Products
Product Facts
■
High-density, low profile,
power/signal, blind-mate
connector
■
Developed to meet next
generation 1U application
by reducing airflow
impedance
■
Design is customizable
■
Serves both solder reflow
and press-fit applications
with the same contact
Tyco Electronics’ new
MINIPAK HDL connector
combines a high-density
power interface into a blindmateable board-to-board
connector, which stands
only 8 mm off the edge of
the printed circuit board.
Applications
■
1U Servers
■
High End Servers
■
Telecommunications
Switches, requiring low
profile
■
Hot-pluggable power
supplies
The MINIPAK HDL product
consists of a right-angle
plug and right-angle receptacle, which utilizes an eye
of the needle tail that can
be used in both solder
and press-fit applications.
The contact offers a current
rating of 16 amps, low contact resistance, and mating
forces less than 0.3 pounds
per contact.
Technical Documents
Product Specification
108-2325
Application Specification
114-13215
The connector is designed
and manufactured to be
mass-customizable, allowing the customer to select a
wide array of configurations
and layouts. MINIPAK HDL
connectors also contain
three levels of mating
sequences. This product is
designed specifically for
modular hot-swappable
power distribution systems.
The MINIPAK HDL connector
offers 20% more current
density in a smaller package
than other products currently offered in the market.
Temperature Rise Chart
Simulated Side View of 1U Chassis
Temperature Rise Degree C
MINIPAK HDL
Temperature Rise Vs Current
8 Circuits 2 oz 2 Layer
MULTIBEAM XL
Connector
70
60
0 FPM
100 FPM
200 FPM
300 FPM
Power (0 FPM)
Power (100 FPM)
Power (200 FPM)
Power (300 FPM)
50
40
30
20
10
0
0
10
20
12.60
[.496]
MINIPAK HDL
Connector
Airflow
8.00
[.315]
30
Current DC Amperes
34
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
“NEW” MINIPAK HDL Connectors (Continued)
Contacts
Plating — Gold over nickel, or gold
over palladium-nickel in mating area
Performance Data
Board-to-Board Products
Current Rating — 16 Amps
Max. Operating Temperature —
120°C
2.035
[51.70]
2.031
[51.60]
.315
Max.
[.800]
.315
Max.
[.800]
.764
[19.40] 1.224
[31.10]
.520
[13.20]
Right-Angle Receptacle
Part Number 2-1926733-5
Right-Angle Plug
Part Number 2-1926732-5
Part Numbers
Configuration
25S X 8P
25S X 10P
25S X 16P
40S X 24P
2P X 15S X 2P
6P X 15S X 6P
8P X 25S X 8P
Right-Angle
Plug
1-1926732-8
2-1926732-5
4-1926732-6
7-1926732-7
1926720-2
1-1926720-6
2-1926720-5
Right-Angle
Receptacle
1-1926733-8
2-1926733-5
4-1926733-6
7-1926733-7
1926721-2
1-1926721-6
2-1926721-5
.315
Max.
[8.00]
.079
[2.00]
.594
[15.10]
.130
[3.30]
.156
[3.96]
Part Number 2-1926720-5
.315
Max.
[8.00]
.630
[16.00]
.079
[2.00]
.130
[3.30]
.156
[3.96]
Part Number 2-1926721-5
Note: All part numbers are RoHS compliant.
35
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MINIPAK HD Connectors
Board-to-Board Products
Product Facts
■
Designed to the PICMG
MicroTCA.0 Standard
■
30 microinches gold plating
over nickel
■
RoHS compliant
■
24 high current density
power contacts, able to
carry up to 14.5 Amps per
contact when fully loaded
■
Industry proven Universal
Power Module (UPM) power
contacts
■
Hot-plug contact design
controls arc during hot
mate/unmate cycles
■
3 mating levels
Tyco Electronics supplies
the Power Entry Module
(PEM) connector specified
in the PICMG MicroTCA
Standard. The PICMG
MicroTCA.0 Standard is
one of the latest standards
addressing future
telecommunications needs.
The MINIPAK HD connector
combines 24 power contacts and 72 high density
signal contacts. The power
contacts are the industry
proven contacts utilized in
the Universal Power Module
(UPM) and are capable of
carrying 14.5 Amps per
contact when fully energized. Rugged contact
design ensures long-term
reliability and sacrificed
contact tip, controls arcing
during hot mate/unmate
cycles. The MINIPAK HD
also features 3 levels of
mating and selective gold
plating on contacts.
Contact Blades
Product Facts
■
Designed for Hot Swap
applications
■
Extended sacrificial contact
tip absorbs arc
■
Main contacts stay free of
contaminants
MINIPAK HD Contact Blades
Technical Documents
Product Specification
108-2253
Application Specification
114-13182
Industry Standard
PICMG MicroTCA R1.0
MicroTCA and PICMG are trademarks of
PICMG-PCI Industrial Computer
Manufacturers Group, Inc.
36
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MINIPAK HD Connectors (Continued)
The vertical connector consists of 72 2 mm pin and
24 Universal Power Module
(UPM) receptacle contacts.
The contacts have compliant pin tails for press-fit
applications.
.917 ± .004
[23.30 ± 0.10]
2.213
Ref.
[56.20]
Board-to-Board Products
MicroTCA Connectors —
MINIPAK HD Board-toBoard Connector
Vertical Receptacle,
Compliant Press-Fit
Part Number 1469920-1
(Tin-lead PCB Tails)
Part Number 1469920-2
(Tin Plated PCB Tails)
2.406 ± .008
[61.10 ± 0.20]
.217
Ref.
[5.50]
To Centerline
Of Cavity
.866
Ref.
[22.00]
.030 ± .002
[0.75 ± 0.05]
.187
Ref.
[4.75]
.531
Ref.
[13.50]
.016 Ref.
[0.40] 72 Plcs.
.374
Ref.
[9.50]
.812
2 Plcs.
[20.62]
Part Number 1469920-1
PCB Seating Tool
Part Number 1901650-1
Right-Angle Plug, Solder
Tail or Compliant Press-Fit
Part Number 1469921-1
(Solder Tail)
Part Number 1469922-1
(Press-Fit)
Part Number 1469922-2
(Press-Fit, Tin-Lead PCB
Tails)
The right-angle connector
consists of 72 high density
signal pins and 24 rightangle UPM blades that
feature 2 mating lengths
for the mate first/break last
ground sequencing. The
right-angle connectors come
in 2 piece tail variations,
press-fit and solder.
.929
Ref.
[23.60]
.871 ± .006
[22.12 ± 0.15]
1.559 ± .004
[39.60 ± 0.10]
.748
Ref.
[19.00]
.472 ± .004
[12.00 ± 0.10]
.795 ± .004
[20.20 ± 0.10]
.685 ± .004
[17.40 ± 0.10]
Part Number 1469921-1
Note: All part numbers are RoHS compliant.
37
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MINIPAK HDE Connectors
Board-to-Board Products
Product Facts
■
Compatible with 2 mm
equipment practices per
IEC 61076-4-101
■
One-piece molded
housing — fewer parts to
assemble to PCB
■
Very high current density —
18 Amps per contact on each
contact in an 8-position
(2 x 4) connector
■
4 PCB tails distributes the
current with just 4.5 amps
per plated through hole
■
Hot-pluggable contact
design reduces contact
degradation associated with
live PCB insertions /
extractions
■
Two-levels of contact
sequencing for mate-firstbreak-last operation
Technical Documents
Product Specification
108-2289
Instruction Sheet
408-10157
The new MINIPAK HDE
connector is the latest high
current power module
designed to serve in both
backplane power distribution and general PCB-toPCB applications. It was
designed to complement the
most popular high-speed
backplane connectors
offered by Tyco Electronics,
including HM-Zd, Z-PACK
TinMan and MULTIGIG RT
connectors.
The two-row configuration
offers a benefit to the PCB
designer. The power can
be fed from either the top or
bottom row, with the return
path routed through the
other remaining row.
Alternatively, the same voltage rail can be routed to
both the top and bottom
rows and the return path
can be routed to both the
top and bottom rows of
adjacent contacts.
The two row configuration
offers the additional benefit
of occupying just half the
linear PCB edge space of
other types of board-toboard power modules.
The low mating force contact reduces the moment /
stresses on the connector
during mating and reduces
the plating wear for longterm reliability.
The MINIPAK HDE connector has two-levels of blade
lengths to provide matefirst-break-last operation
for hot swap operation.
In addition, in the event the
connector is used to mate
or un-mate to a live load,
the sacrificial contact tip
absorbs the arc to keep the
remaining contact mating
surfaces free of damage.
This “hot-plug” contact
design has been approved
by UL for current interrupt
applications.
All MINIPAK HDE connectors are easily applied to
the PCB with common
“flat-rock” seating tools.
The connector mates with
Tyco Electronics’ Universal
Power Module connectors
found on page 55.
38
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MINIPAK HDE Connectors (Continued)
Contacts
Industry proven Universal
Power Module (UPM) style
contacts
Board-to-Board Products
Performance Data
Current Rating — 18 Amps on each
contact in the 8-position (2x4) connector
Low Level Contact Resistance —
2 milli-ohms max
Operating Temperature —
-40°C to +105°C
Technical Documents
Product Specification
108-2289
Description
2x3
2x4
2x5
2x6
2x7
2x8
2x9
2 x 10
2 x 11
2 x 12
Part Number
1926223-1
1926224-1
1926225-1
1926226-1
1926227-1
1926228-1
1926229-1
1926271-1
1926272-1
1926273-1
Dimension L
.472" [12.00]
.590" [15.00]
.708" [18.00]
.826" [21.00]
.944" [24.00]
1.06" [27.00]
1.18" [30.00]
1.30" [33.00]
1.42" [36.00]
1.54" [39.00]
Mating Connector*
5-5223955-2
120953-1
120953-2
120953-3
120953-4
120953-5
120953-6
120953-7
120953-8
120953-9
*Mating connectors are single row, MINIPAK HDE requires 2 x mating
connectors.
Note: For more information on the mating connector please see page 52.
Receptacle Seating Tool Part Number 1585309-X.
L
.969
[24.63]
.753
[19.13]
.844
[21.44]
.111
[2.83]
.118
Pitch
[3.00]
Note: All part numbers are RoHS compliant.
39
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
FLATPAQ Modular Board-to-Board Power Connectors —
Our Most Modular Board-to-Board Power Connector
Product Facts
32 Amp high-performance
ELCON CROWN BAND power
contacts
■ True hot-plug power contacts
available for current
interruption under load
■ Versatile modular design
allows customized
configuration to meet your
specific application
requirements
■ Perpendicular, parallel and
co-planar styles available
■ Sequenced mating of power
and signal contacts
■ Solder and compliant pressfit termination to the board
■ Unique active guide modules
double as alignment guide
and power contact
■ All FLATPAQ products in this
section are RoHS compliant
Board-to-Board Products
■
Typical Applications
Board-to-board power
interconnections
■ Hot-swap N+1 power
distribution for
telecommunications,
servers and mini-computers
■ Uninterruptible power
systems (UPS)
■ Removable battery packs
■
FLATPAQ connectors
provide hot-pluggable
AC and DC power in boardto-board applications.
Customized configurations
of up to 45A power contacts,
signal & logic lines, and
guides (both active and
passive) are enabled by
the assembly of various
standard modules. This
allows the designer to
specify guidance for blindmating situations, contact
mating sequence, spacing
for voltage ratings, and
current interruption under
load (true hot-plug), to meet
custom design requirements
without incurring any tooling
expense.
Product Highlights
Highly Configurable
FLATPAQ connectors are
custom configurable using
standard modules that can
be arranged in any order
to meet the application
requirements. It is even
possible to have both power
blades and power sockets
in the same connector side.
Using off-the-shelf, modular
components enables quick
turnaround of sample
requests, typically within
one week, to allow your
design to move forward on
schedule.
High-performance ELCON
Power Contacts
FLATPAQ socket modules
use proven CROWN BAND
technology, for low insertion
and extraction forces,
minimal voltage drop and
reduced temperature rise.
The latest generation
contacts are 45A USR rated
(32.5A CNR) and can
handle even higher currents
when mounted on boards
with 5 oz copper traces or
on bus bars.
hot-pluggable socket
contacts are rated at
35A USR, 20A CNR.
Both hot-plug and regular
sockets can be mixed in
the same connector (as can
both power blades and
power sockets).
Standard power modules
utilize the same contacts
as the MINIPAK connectors
for cost effectiveness.
The original “float” mounted
blade modules are still
available where physically
isolating the blade from the
PCB solder joints is
desired.
24-position straight mount
Signal socket modules are
now available in a cost
effective 1A design.
Power and Signal Sequencing
Power contacts are
available in Standard,
Premate and Postmate
lengths to meet your power
sequencing requirements.
Signal contacts have
Standard and Premate
length options, consult
Customer Service for
details.
40
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
FLATPAQ Modular Board-to-Board Power Connectors —
Our Most Modular Board-to-Board Power Connector (Continued)
Various Contact Termination
Styles
Straight mount socket
connectors are also
available with compliant
‘Eye of the Needle’ design
press-fit terminals for
0.093″ (2.4 mm) minimum
thickness boards and bus
All terminations fit 0.040
+/- .0030″ (1.02 =/- .08 mm)
diameter plated through
holes.
Alignment Guides and
Mounting Ears
FLATPAQ connector
alignment guides improve
gatherability in blind-mate
situations and can be either
electrically active (35A
rated) or passive. Passive
guides should be used in
conjunction with mounting
ears when placed at the
end of the connector.
Mounting ears should also
be considered on rightangle mounted connectors.
See page 44 for details on
completing the layout sheet.
A drawing with general
contact sequencing and
alignment information is
available; please contact
Customer Service for a copy.
Finished Connector Drawing
Safety Regulatory Agency
Compliance
Tyco Electronics will
provide a customer
drawing showing all
envelope dimensions and
PCB mounting pattern
based on the configuration
indicated using the layout
sheet available at
www.tycoelectronics.com.
Electrical Performance
Board-to-Board Products
All connectors are available
in two lengths of solder
termination, .115″ (2.9 mm)
nominal for 0.062″ (1.6 mm)
thick boards, and 0.177″
(4.5 mm) for 0.093″ (2.4 mm)
and 0.125″ (3.18 mm)
boards.
bars. Tyco Electronics
will provide details of the
recommended pressing
fixture for each assembly.
FLATPAQ connector has
been evaluated by safety
regulatory agencies for use
in data, signal, control and
power applications. Consult
Customer Service for details.
Temperature Rise
100
Copper Thickness
2 oz.
3 oz.
5 oz.
90
80
TEMPERATURE, C°
The graphs below show
the performance of the
FLATPAQ contact design in
terms of temperature rise
against current. Tests were
performed on 250 V power
modules mounted on PC
boards with 2 oz, 3 oz, and
5 oz copper traces.
70
60
50
40
30
20
10
0
0
5
10
15
20
25
30
35
40
45
50
55
40
45
50
55
CURRENT, AMPERES
Voltage Drop
20
18
Copper Thickness
2 oz.
3 oz.
5 oz.
VOLTAGE DROP, mV
16
14
12
10
8
6
4
2
0
0
5
10
15
20
25
30
35
CURRENT, AMPERES
41
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
Board-to-Board Products
FLATPAQ Connector Product Specifications
Materials
Insulators
Power Blades
Power Sockets
Hot-Plug Power Sockets
& Active Guide Sockets
Signal Pin Contacts
Signal Socket Contacts
Passive Guide Pin
Active Guide Pin
Finishes
Contacts
PPA, UL 94V-0 flammability rated, color black
Copper alloy
Phosphor Bronze
Crown Bands: Beryllium Copper
Holder: Phosphor Bronze
Solder termination: Brass
Press-fit: Phosphor Bronze
1 Amp: Phosphor Bronze
3 Amp: Beryllium Copper
Brass
Copper alloy
Selectively plated gold
(30 microinches minimum) with tin
on terminations, all over nickel
Nickel
Silver
Passive Guide Pin
Active Guide Pin
Electrical
Current Rating
Power Contacts
Current Rating,
Hot-Plug Power Contacts
Signal Contacts, 1 Amp
Signal Contacts, 3 Amp
Contact resistance
UL
CUR/CSA
UL
CUR/CSA
UL
CUR/CSA
UL
CUR/CSA
Power
Signal
Insulation Resistance
Dielectric Strength
Mechanical
Insertion Force
Power
Signal
Extraction Force
Power
Signal
Contact Retention
(in insulator)
Durability
Operating Temperature
Recommended PCB Hole
Power
Signal
Press-Fit Tooling
Marking
45 Amp
32.5 Amp
35 Amp at 250V, 50 cycles
20 Amp at 250V, 50 cycles
1 Amp, 250 VAC
1 Amp, 250 VAC
3 Amp, 250 VAC
2.5 Amp, 250 VAC
2 mΩ maximum initial, (3 mΩ maximum
after 500 cycles durability), at 35A per
MIL-STD-1344, Method 3004
15 mΩ maximum initial, (30 mΩ maximum
after 500 cycles durability), at 100mA, 20
mV, per MIL-STD-1344, Method 3002
5,000 MΩ minimum at 500VDC for 2 minutes, per
MIL-STD-1344, Method 3003
1,500 VDC for 1 minute, per MIL-STD-1344,
Method 3001
4.0 lbf (17.8 N) maximum
5.0 ozf (1.4 N) maximum, using .0305″ (.775 mm)
diameter steel test pin
1.0 lbf (4.4 N) minimum
0.5 ozf (0.1 N) minimum, using .0295″ (.749 mm)
diameter steel test pin
10.0 lbf (44.4 N) minimum
5.0 lbf (22.2 N) minimum
500 Cycles, per MIL-STD-1344, Method 2016
-40 to +105° C
Finished hole: 0.040 +/- .0030″ dia. (1.02 +/- .08 mm dia.)
Drilled hole: 0.0453 +/- .0005″ dia. (1.15 +/- .013 mm dia.)
Copper Plate: 0.0010″ (.025 mm) min. per surface
Tin Plate: 0.0003″ (.008 mm) min. per surface
Press fixture is recommended for compliant press-fit assemblies.
Consult Tyco Electronics for tool drawing
Connectors are marked with manufacturer’s logo, part number and lot code
42
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
FLATPAQ Connectors
Part Number 6646465-1
FLATPAQ 250V Straight
Socket Connector
4 Power, 24 Signal Contacts
2.559
[65.00]
.551
[14.00]
Board-to-Board Products
Part Number 6646597-1
FLATPAQ 250V
Straight Socket Connection
with Active Guide Pin
2 (250V) Power,
2 amps Signal Contacts
3.209
[81.50]
.551
[14.00]
.984
[25.00]
.551
[14.00]
Part Number 6646722-1
FLATPAQ 600v
Right-Angle Pin Connector
with Guide Socket
7 (600V) Power,
6 Signal Contacts
4.88
[124.00]
.551
[14.00]
.551
[14.00]
Note: All part numbers are RoHS compliant.
43
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
How to Specify Your Modular FLATPAQ Connector
Board-to-Board Products
In order to build your Modular FLATPAQ connector, it is necessary to specify all application-specific requirements such
as required modules, their order, termination, and sequencing. For this purpose, a Modular FLATPAQ Connector layout
form such as the one shown below is available. Just complete the form and send it to Tyco Electronics Customer Service.
We will generate a Customer Drawing for you to check and approve prior to connector production. Samples are also
available upon request.
1 Enter your contact infor●
mation, including signature and date.
2 Indicate the connector
●
layout by filling in the FP
number of each module
required in the boxes,
one per box. Use one
form per mated pair.
The left to right order
of the modules should
match the mating face
views of the connector.
When laying out rightangle assemblies, make
sure that you look at the
mating face with the
termination tails facing
downwards.
3 For solder terminated
●
assemblies, indicate the
tail length for each half
of the connector using
the checkboxes to the
right of the layout grid.
Sample Modular FLATPAQ Connector Layout Form
Instructions
1. Indicate the connector layout by filling in the FP number of each module required in the boxes, one per box. Use one form per mated pair.
2. The left to right order of the modules should match the mating face
views of the connector. When laying out right-angle assemblies,
make sure you look at the mating face with the termination tails facing
downwards.
3. For solder terminated assemblies, indicate the tail length for
each half of the connector using the checkboxes to the right of the
layout grid.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
Upon receipt of this form, Tyco Electronics will generate a Customer
Drawing for you to check and approve prior to connector production.
ENTER CUSTOMER INFORMATION
Company
Location
Contact Name
Title
Telephone
Fax
Email Address
I am: ❏ End user
❏ Contract manufacturer (end user:
Signature
Today’s Date
Annual Quantity Required
Submit to your local Tyco Electronics Sales Engineer.
Write the “FP” numbers to indicate the layout of one half of the connector assembly, matching the left to right order with the mating face view of the connector (right-angle assembly tails facing downwards).
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
Solder Tail Options
❏ .115" (2.9 mm); .062" thick boards
❏ .177" (4.5 mm); .093/.125" boards
Write the “FP” numbers to indicate the layout of the mate of the above assembly, matching the left to right order with the mating face view of the connector (right-angle assembly tails facing downwards).
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
Solder Tail Options
❏ .115" (2.9 mm); .062" thick boards
❏ .177" (4.5 mm); .093/.125" boards
Right-Angle
Mount
250 V Power Modules
FP151
Standard Blade
FP105
Float, Standard
FP152
Premate Blade
FP106
Float, Premate
Signal Modules
FP153
FP104
Postmate Blade Hot-Plug Socket
FP107
Float, Postmate
FP512
Spacer, 250 V
600 V Power Modules
FP155
Standard Blade
FP121
Float, Standard
Straight Mount
FP156
Premate Blade
FP122
Float, Premate
FP157
FP120
Postmate Blade Hot-Plug Socket
FP123
Float, Postmate
FP514
Spacer, 600 V
250 V Power Modules
Note: All modules
FP161
FP150
Socket, Solder Standard Blade
are solder tail
FP250
FP101
termination unless
Socket, Press-fit Float, Standard
indicated as
FP100
compliant Press-fit.
Hot-Plug, Solder
Select solder tail
FP200
length using check
Hot-Plug, Press-fit
boxes to the right of
the connector layout
600 V Power Modules
grid above. 0.093"
or thicker boards
are recommended
for compliant
Press-fit termination
FP154
FP165
style. Consult
Socket, Solder Standard Blade
Tyco Electronics
FP254
FP117
for signal module
Socket, Press-fit Float, Standard
sequencing. See
FP116
Catalog 1773096 for Hot-Plug, Solder
benefits of Hot-Plug
FP216
Hot-Plug, Press-fit
and Float options.
■
)
FP302
24-Pin
FP303
24-Pin Socket
FP314
6-Pin
Mounts
Guides
FP500
FP501
Left Flange Right Flange
Mount
Mount
Right-Angle
Guide Sockets
FP506 Passive
FP516 Active
FP315
6-Pin Socket
FP507
Right-Angle
Passive
Guide Pin
Signal Modules
FP162
Premate Blade
FP102
Float, Premate
FP163
Postmate Blade
FP103
Float, Postmate
FP511
Spacer, 250 V
FP300
FP312
FP313
FP318
24-Pin
6-Pin 6-Pin Socket,
24-Pin Socket
3A rated
FP418
FP400
FP412
24-Pin, Press-fit 24-Pin Skt, Press-fit 6-Pin,
FP413
Press-fit 6-Pin Skt,
FP301
3A, Press-fit
24-Pin Skt, 3A Rated
FP401
24-Pin Skt, 3A, Press-fit
Mounts
FP166
Premate Blade
FP118
Float, Premate
FP167
Postmate Blade
FP119
Float, Postmate
FP513
Spacer, 600 V
Guides
FP500
FP501
Left Flange Right Flange
Mount
Mount
FP502
Straight Guide Pins
Straight
FP503 Passive
Passive
FP515 Active, M3
Guide Socket FP517 Active, 4-40
How to Obtain Modular FLATPAQ Connector Layout Forms
Modular FLATPAQ Connector layout forms can be obtained directly from Customer Service or through your
Tyco Electronics Sales Engineer. They can also be downloaded from the website; at http://www.tycoelectronics.com.
44
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
ICCON Single Pole Power Connectors
Product Facts
Uses high-performance
Crown contact
■ 35A current rating
■ True compliant press-fit and
solder tails
■ Pin locking feature option
■ Standard DIP footprint
.300 x .100 and
ICCON SLIMLINE connector
.100 x .100
■ Insulator rated at 105°C,
UL 94V-0
■ Meets safety regulatory
requirements
■ #8 AWG wire size
■ Parallel and perpendicular
■ Sequencing capability
■ All ICCON products in
this section are RoHS
compliant
■
Product Highlights
Mating with Discrete Contracts
High Performance Contact
For further versatility,
ICCON connector products
can mate with discrete
contacts, available in a
variety of termination types.
■
ICCON connectors use
ELCON CROWN BAND
Contact, a multifingered
spring which provides a
greater surface contact
area, thus ensuring small
millivolt drop, minimum heat
generation and very low
insertion and extraction
forces.
■
Optional Locking Feature
Typical Applications
Power distribution
Board-to-board
interconnection
■ Board-to-busbar
interconnection
■ Board-to-wire
interconnection
■ High-density power designs
■ Board stacking
The optional locking feature
provides minimum 5 lbs.
(2.21kg) retention force
to improve connection
integrity, securing against
accidental unmating in
harsh mechanical
conditions.
Support for Multiple Mounting
Styles
ICCON connectors are
available with press-fit or
solder tails for mounting
on both PC boards and bus
bars. Tyco Electronics uses
eye of the needle true
compliant tails for the most
reliable mounting using
solderless techniques.
Each ICCON connector has
a 10 pin DIP footprint for
convenient industry standard mounting. Through
hole socket connectors can
be used in “bottom entry”
applications.
Board-to-Board Products
ICCON connectors provide
a reliable high current
power interconnection with
quick connect/disconnect
function for space
constrained motherboarddaughterboard, cableboard and board-busbar
power delivery applications.
ICCON SLIMLINE Connectors
With a footprint close to
30% smaller than the
standard ICCON connector
products, the ICCON
SLIMLINE connector
products allow integrating
more components in less
board real estate, providing
substantial space savings
compared to connectors of
this type in the same
performance range.
Stacked ICCON
Designed for motherboardto-daughtercard power
distribution systems, the
Stacked ICCON combined
power/guide module
occupies significantly less
PCB edge space than
separate modules.
Providing more than 200
Amps/inch, this right-angle
mounted connector is ideal
for applications needing
high current density.
45
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
ICCON Standard DIP Connectors (.300 x .100 footprint)
Right-Angle Receptacle
Part Number 6643232-1 Solder
Part Number 6643272-1 Compliant
.400
[10.16]
.200
[5.08]
.150
[3.81]
.484
[12.29]
.400
[10.16]
.500
[12.70]
.665
[16.89]
.420
[10.66]
Solder
Board-to-Board Products
.300
[7.62]
.400
[10.16]
.400
[10.16]
Right-Angle Pin
For Part Numbers and “A” Dimension
See Table Below
A
.500
[12.70]
A
.142
Dia.
[3.60]
Part Number 6643264-1 Through Hole,
Solder
Part Number 6643219-1 Closed, Solder
Part Number 6643269-1 Through Hole,
Compliant
.180
[4.57]
.400
[10.16]
.400
[10.16]
.400
[10.16]
.300
[7.62]
Vertical Receptacle
.100
[2.54]
.300
[7.62]
.500
[12.70]
.200
[5.08]
.150
[3.81]
.100
[2.54]
.400
[10.16]
.400
[10.16]
.300
[7.62]
.100
[2.54]
.500
[12.70]
.100
[2.54]
.400
[10.16]
.500
[12.70]
.520
[13.20]
.150
[3.81]
.180
[4.57]
.150
[3.81]
.520
[13.20]
Solder
.300
[7.62]
.400
[10.16]
Vertical Pin
For Part Numbers and “A” Dimension
See Table Below
.300
[7.62]
.100
[2.54]
.100
Typ.
[2.54]
.500
[12.70]
.400
[10.16]
.400
[10.16]
.500
[12.70]
.142
Dia.
[3.60]
.142
Dia.
[3.60]
A
A
.150
[3.81]
.520
[13.20]
.180
Typ.
[4.57]
.520
[13.20]
Solder
.300
[7.62]
Right-Angle Pins
Solder Tail
6643281-1
6643276-1
6643431-1
6643432-1
6643433-1
6643434-1
6650785-1
6643435-1
Compliant
Locking Style
6643275-1
6643273-1
6643442-1
6643443-1
6643444-1
6643445-1
6643446-1
6643447-1
Non-Lock
Lock
Non-Lock
Non-Lock
Non-Lock
Non-Lock
Non-Lock
Non-Lock
.400
[10.16]
Length “A”
.470
.470
.570
.750
1.000
1.250
1.500
1.750
[11.93]
[11.93]
[14.48]
[19.05]
[25.40]
[31.75]
[38.10]
[44.45]
.100
[2.54]
Vertical Pins
Solder Tail
6643283-1
6643266-1
6643436-1
6643437-1
6643438-1
6643439-1
6643440-1
6643441-1
.400
[10.16]
Compliant
Locking Style
6643274-1
6643271-1
6643449-1
6643450-1
6643451-1
6766439-1
6766440-1
6766441-1
Non-Lock
Lock
Non-Lock
Non-Lock
Non-Lock
Non-Lock
Non-Lock
Non-Lock
Length “A”
.470
.470
.570
.750
1.000
1.250
1.500
1.750
[11.93]
[11.93]
[14.48]
[19.05]
[25.40]
[31.75]
[38.10]
[44.45]
Note: All part numbers are RoHS compliant.
46
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
ICCON Discrete Contacts
Crimp Socket
1.00
[25.40]
Part Number 6648317-1 #8 AWG
.305
Dia. Flange
[7.74]
Crimp Pins
1.02
[25.90]
Part Number 1766163-1
#8 AWG Non-Lock
Part Number 1766160-1
#8 AWG Lock
Part Number 1766816-1
#10 AWG Non-Lock
Part Number 1766161-1
#10 AWG Lock
.142
Dia.
[3.60]
Board-Mount Pin — Floating
Part Number 6643252-1
“A” = 1.250 (31.75)
Part Number 6643253-1
“A” = 1.350 (34.29)
.305
Dia. Flange
[7.74]
.264
Dia. Crimp Barrel
[6.70]
.470
[11.93]
.437
Dia.
[11.09]
#7/16-20
.026
[0.66]
.100
[2.54]
.438 ± .001 Dia.
[11.12 ± 0.02]
.436 Dia.
[11.07] Max.
Sharp Corners
Permissible
CL
.760
[19.30]
Board-to-Board Products
.264
Dia. Crimp Barrel
[6.70]
3° Angular
Deflection
A
.175
[4.44]
.125
Dia.
[3.17]
Jam Nut
Mounting
Requirements
Mounted Example:
Mating PCB-Mount
.562
[14.27]
Part Number 6643248-1
Jam Nut
.465
[11.81]
.225
Dia.
[5.71]
Board-Mount Pin
Part Number 1766815-1
“A” = 1.250 (31.75)
Part Number 1766157-1
“A” = 1.350 (34.29)
.125
Dia.
[3.17]
Double-Ended Board-Mount Pin
PCB-Mount Receptacle
for Increased Gatherability
(for Use with Floating Pin) ± 2.5 mm
.170
[4.31]
.312
[7.92]
.375
[9.52]
.175
[4.44]
#10-32
.361
[9.16]
A
.230
Dia.
[5.84]
.200
[5.08]
Part Number 1766817-1
.130
Dia.
[3.30]
.650
[16.51]
PCB
.600
[15.24]
#10-32
.130
Dia.
[3.30]
.125
[3.17]
.725
[18.41]
1.700
[43.18]
.154
Dia.
[3.91]
3.525
[89.54]
.375
[9.52]
.361
[9.16]
.312
[7.92]
1.825
[46.36]
Note: All part numbers are RoHS compliant.
47
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
ICCON Connector Electrical Performance
Stacked ICCON
2-Position Right-Angle
Socket Assembly
Board-to-Board Products
25 Amps per socket
Part Number 2085181-1
.394 ± .002
[10.00 ± 0.05]
.768
[19.50]
.205
[5.20]
.209
2 Plcs.
[5.30]
Stacked ICCON Pins
Dim. A
.630
16.00
.709
18.00
.787
20.00
Part Number
Ø .125
[3.17]
A
1766663-1
1766663-2
1766663-6
.368
[9.35]
Electrical Performance
Note: All part numbers are RoHS
compliant.
48
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
ICCON SLIMLINE Connectors (.100 x .100 Footprint)
Parallel Pin
Board-to-Board Products
Part Number 6643228-1 Solder
Part Number 6643227-1
Solder w/Locking Feature
Part Number 6643222-1 Compliant
Part Number 6643223-1
Compliant w/ Locking Feature
Parallel Socket
Part Number 6643229-1 Solder
Part Number 6643220-1 Press-Fit
Connector Mounting
The ICCON SLIMLINE
Connector is optimized for
a board thickness of .093"
(2.38 mm), but can be successfully used on boards
from .062" to .125" (1.58 mm
to 3.17 mm)
Specifications
Finishes
Crowns
Pin Contacts
Material
Housing
Body and pin contacts
Crowns
Electrical
Ratings
UL (USR)
UL (CNR)
Voltage drop at UL rating
Contact System Performance, ICCON SLIMLINE Connector
Current Ratings vs. mV Drop/Temperature Rise
30 microinches Gold plated over nickel
Silver over nickel
Non-locking version, mounted on 2 oz. and 5 oz. copper boards
Polyester, 30% glass-filled, UL 94V-0 black
Copper alloy
Copper alloy
35A at 250V
25A at 250V
27.2mV
Note: All part numbers are RoHS compliant.
49
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
Mini Power Modules
Board-to-Board Products
Product Facts
■
Hard Metric design
compatible with
Z-PACK 2 mm HM,
Z-PACK HM-Zd, MULTIGIG RT
and Futurebus+ Connectors
■
Sequenced contact options
for “make-first-break-last”
applications
■
Compliant press-fit
connections to PCB
■
High Durability
200 Cycles — MULTIGIG RT,
UPM Connectors
100 Cycles — Futurebus+
Connectors
■
Optional Guide Pins &
Sockets for blind-mate
applications
■
Bellcore approved (contact
Tyco Electronics for specific
part numbers)
AND C
R
■
■
R
Recognized to US and
Canadian requirements
under the Component
Recognition program of
Underwriters Laboratories,
File #E28476
Produced under a Quality
Management System
certified to ISO 9001
A copy of the
certificate is available
upon request.
The Tyco Electronics Mini
Power Module family of
products are designed
specifically to compliment
the Hard Metric board-toboard backplane interconnects. These products
include, MULTIGIG RT,
Z-PACK 2 mm HM, Z-PACK
HM-Zd, Futurebus+ and
other Connectors. Available
in “Standard” and “Reverse”
orientations, the power
modules can provide touchsafe protection (per IEC
60950) to either side of the
connection (backplane or
daughter card.)
Both the headers and
receptacle offer compliant
pin connections to the PCB.
The Universal Power
Module and MULTIGIG RT
Connectors use the
ACTION PIN Contact
compliant design to provide
maximum surface connection to the plated through
hole. The range of products
offers power contacts
rated as low as 3 amps
per contact (Futurebus+
Connectors) up through
20 Amps per contact
(MULTIGIG RT Connectors).
In addition, the newest
products offer high conductivity contacts which
improve the current carrying capacity by as much
as 50%.
The low contact normal
force, available lubricated
surface coating (UPM) and
high conductivity materials
combine to produce a high
durability cycle rating and
high current density. In
addition, the high temperature housing and contact
materials make these power
modules suitable for a wide
variety of applications
including modular hot-swap
power supplies used in
computer, telecommunications, medical, and industrial equipment.
Need more information?
Call Technical Support at
the numbers listed below.
Technical Support is staffed
with specialists well versed
in all Tyco Electronics
products. They can provide
you with:
■ Technical Support
■ Catalogs
■ Technical Documents
■ Product Samples
■ Tyco Electronics
Authorized Distributor
Locations
Generous alignment
features designed into the
housings on the Mini Power
Drawer Connector and
optional guidance hardware
make these Power Modules
ideal for blind-mating
applications.
50
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
Mini Power Modules for PCB-to-PCB Power Distribution
MULTIGIG RT Power Modules
Board-to-Board Products
The newest of the power modules.
Designed specifically for use with
Tyco Electronics 2 mm Backplane
Connectors. Suitable for 0.8 mm
Card Spacing and made from
high conductivity copper alloys,
these power modules offer
improved power density and high
cycle life. The distribution to the
PCB is through six ACTION PIN
compliant tails which offer maximum surface area contact to the
plated through hole. The design
offers electrical protection with its
sacrificial contact design and
mechanical protection by recessing the power contacts. Contacts
are rated for up to 20 Amps per
contact, which delivers up to
120 Amps per linear inch. Three
contact mating lengths are available, in 1.5 mm sequence levels.
• Designed for Hot-Plug Operation
• 6 PCB tails per contact
Universal Power Module (UPM)
Also designed to complement
Tyco Electronics 2 mm Backplane
Connectors, the design meets
IEC 60950 touch-safe requirements by reversing the orientation
as compared to the Futurebus+
Power Modules. The touch-safe
receptacle is applied to the “hot”
side, which is typically the backplane side of the connection.
Offered in both a Standard Power
grade, rated at 10 Amps per contact and High Power grade which
carries 16 Amps per contact —
resulting in up to 100 Amps per
linear inch. Hot-plug design and
low normal force provide high
durability and high reliability.
Three contact mating lengths are
available in 1.6 mm sequence
levels. Multiple contact sequence
patterns are available.
• Lubricated for Environmental Protection
• Designed for Hot-Plug
• 4 PCB Tails per Contact
Z-PACK 2 mm Futurebus+
Power Modules
The power modules, designed to
IEC 61076-4-OX, are used along
with Tyco Electronics Futurebus+
Backplane Connectors. The contacts are rated for 3 Amps and
fully loaded will carry approx.
50 Amps per linear inch. Three
contact mating lengths available
in 0.75 mm increments.
51
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
MULTIGIG RT Power Modules
Right-Angle Headers
X
Material and Finish
Board-to-Board Products
Housing — Liquid Crystal Polymer
Contacts — Phosphor Bronze
Plating — .000050 [0.00127] min
gold in mating area. .000020
[0.000508] min. tin on PCB tail over
.000050 [0.00127] min. nickel over all
Related Product Data
Guiding Hardware (Optional) —
pages 58 and 59
Seating Tooling —
Headers — No tool required
— Flat Rock
Receptacles — See application
specification
No. of
Positions
Dimension
X
2
.417 [10.6]
4
.701 [17.8]
Technical Documents
Product Specification
108-2062
Application Specification
114-13062
Sequence
L,L
M,L
S,L
S,S
S,M
M,M
L,L,L,L
M,L,L,M
S,L,L,M
S,L,L,S
S,M,L,M
M,M,M,M
S,M,M,S
S,S,S,S
M,S,S,M
Part
Number
1410279-7
1410279-8
1410279-9
1-1410279-0
1-1410279-1
1-1410279-2
1-1410271-1
1-1410271-2
1-1410271-3
1-1410271-4
1-1410271-5
1-1410271-6
1-1410271-7
1-1410271-8
2-1410271-0
Sequencing reads left-to-right along mating face.
L (long) = 0.541 [13.75], M (medium) = 0.482 [12.25], S (short) = 0.423 [10.75]
Vertical Receptacle
Material and Finish
Housing — Liquid Crystal Polymer
Contacts — Phosphor Bronze
Plating — 0.00127 (.000050) min
gold in mating area. 0.000580
(.000020) min. tin on PCB tail over
0.00127 (.000050) min. nickel over all
L
Related Product Data
Guiding Hardware (Optional) —
pages 58 and 59
Seating Tooling —
Headers — No tool required
— Flat Rock
Receptacles — See application
specification
No. of
Positions
2
4
Dimension
L
.333 [8.45]
.616 [15.65]
Part
Number
1410278-2
1410270-2
Technical Documents
Product Specification
108-2062
Application Specification
114-13062
Note: All part numbers are RoHS compliant.
52
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
Universal Power Module (UPM)
Right-Angle Plug
Material and Finish
.661
Ref.
[16.80]
.657
[16.70]
Board-to-Board Products
Housing — PBT
Natural color UL 94V-0
Contacts —
Standard Power —
Phosphor Bronze
High Power —
High Conductivity Copper Alloy
Plating — 0.00127 [.000050] min.
gold in mating area, 0.0050 [.000020]
min. tin-lead on ACTION PIN post area,
with entire contact underplated 0.00127
[.000050] min. nickel
Notes: 1. Environmental lubrication
pre-applied
2. RoHS compliant parts have
tin plated ACTION PIN posts
L
Slim UPM Plug
Related Product Data
Durability — 250 cycles
Guiding Hardware (Optional) —
pages 58 and 59
Seating Tooling —
Header
Seating Tool 224441-X
Board Support Fixture 224442-1
Receptacle
Seating Tool 224421-X
Board Support Fixture 217602-1
Technical Documents
Product Specification
108-1651
SLIM UPM Product Specification
108-78387
Application Specification
114-1103
Instruction Sheet
408-4169 (Receptacle
Seating Tool 224421-X)
Number of
Positions
Dimension
L
3
.472 [12.0]
4
.591 [15.0]
5
.709 [18.0]
6
.827 [21.0]
7
.945 [24.0]
8
1.063 [27.0]
Standard Power
10 Amps/Contact
Sequence*
Pattern
L,L,L
M,L,M
**
L,L,L,L
S,M,L,S
**
L,L,L,L,L
M,M,M,M,L
**
L,L,L,L,L,L
L,M,M,M,M,L
**
L,L,L,L,L,L,L
**
L,L,L,L,L,L,L,L
L,S,L,S,L,S,L,S
Part
Number
5223961-1
5223963-1
**
5646954-1
5646954-2
**
5646955-1
5646955-2
**
5646956-1
5646956-2
**
5646957-1
**
5646958-1
5646958-2
High Power
16 Amps/Contact
Sequence*
Pattern
L,L,L
M,L,M
**
L,L,L,L
L,M,S,S
**
L,L,L,L,L
M,M,L,M,M
**
L,L,L,L,L,L
L,M,S,S,S,S
**
L,L,L,L,L,L,L
L,S,S,L,S,S,L
L,L,L,L,L,L,L,L
L,M,S,S,S,S,S,S
Part
Number
5-5223961-1
5-5223963-1
**
120954-1
120954-2
**
120955-1
120955-2
**
120956-1
120956-2
**
120957-1
120957-2
120958-1
120958-2
*Sequencing Reads left-to-right along mating face.
L (long) = 0.429 [10.9], M (medium) = 0.366 [9.3], S [short] = 0.302 [7.68]
**Other sequence patterns available. See on-line customer drawing.
Slim UPM Right-Angle Plug
Number of Positions
Width
4
0.335 [8.5]
Note: All part numbers are RoHS
compliant.
Part Number
1903977-1
1903977-2
53
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
Universal Power Module (UPM) (Continued)
Vertical Plug
Housing — PBT
Natural color UL 94V-0
Contacts —
Standard Power —
Phosphor Bronze
High Power —
High Conductivity Copper Alloy
Plating — 0.00127 [.000050] min.
gold in mating area, 0.0050 [.000020]
min. tin-lead on ACTION PIN post area,
with entire contact underplated 0.00127
[.000050] min. nickel
Notes: 1. Environmental lubrication
pre-applied
2. RoHS compliant parts have
tin plated ACTION PIN posts
Board-to-Board Products
.020
[0.50]
.098
[2.50]
Material and Finish
CL
.059
[1.50]
.491 ± .010
[12.46 ± 0.25]
.059
.059 [1.50]
[1.50]
.118
Typ.
[3.00]
.585
[14.85]
Ø .024
Ref.
[0.61]
All Plated
Thru Holes
.059
3 Plcs.
[1.50]
.098
[2.50]
.118
Typ.
[3.00]
.366
Ref.
[9.30]
Related Product Data
Durability — 250 cycles
Guiding Hardware (Optional) —
pages 58 and 59
Seating Tooling —
Header
Seating Tool 224441-X
Board Support Fixture 224442-1
Receptacle
Seating Tool 224421-X
Board Support Fixture 217602-1
.078 ± .010
Ref.
[2.00 ± 0.25]
CL
.020
[0.50]
.117
Ref.
[2.98]
.117
Ref.
[2.98]
L
Recommended PCB Layout
Technical Documents
Product Specification
108-1651
Application Specification
114-1103
Number of
Positions
Dimension
L
3
4
5
6
7
8
9
.470 [11.95]
.589 [14.95]
.707 [17.95]
.825 [20.95]
.943 [23.95]
1.061 [26.95]
1.179 [29.95]
Part Numbers
15 mm
18 mm
Stack Height
Stack Height
1645498-1
1645499-1
1645498-2
1645499-2
1645498-3
1645499-3
1645498-4
1645499-4
1645498-5
1645499-5
1645498-6
1645499-6
1645498-7
1645499-7
NEW
“NEW” Low Profile
Universal Power Module
.31
[7.80]
.52
[13.15]
Material and Finish
Housing — LCP
Contacts —
High Conductivity Copper Alloy
Current Rating —
18 Amps per contact
Right-Angle Plug
Part Number 1982260-5
Vertical Receptacle
Part Number 1982257-5
Note: All part numbers are RoHS compliant.
54
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
Universal Power Module (UPM) (Continued)
Vertical and Right-Angle
Receptacles
Material and Finish
Board-to-Board Products
Housing — PBT
Natural color
UL 94V-0
Contacts —
Standard Power —
Phosphor Bronze
High Power —
High Conductivity Copper Alloy
Plating — 0.00127 (.000050) min.
gold in mating area, 0.0050 (.000020)
min. tin-lead on ACTION PIN post area,
with entire contact underplated 0.00127
(.000050) min. nickel
Notes: 1. Environmental lubrication
pre-applied
2. RoHS compliant parts have
tin plated ACTION PIN posts
Related Product Data
Durability — 250 cycles
Mating Force — 1.0N per contact
Unmating Force — .5N per contact
Guiding Hardware (Optional) —
pages 58 and 59
Seating Tooling —
Header
Seating Tool 224441-X
Board Support Fixture 224442-1
Receptacle
Seating Tool 224421-X
Board Support Fixture 217602-1
.302 ± .003
[7.67 ± 0.08]
.392 ± .002
[9.95 ± 0.05]
.478 ± .002
[12.15 ± 0.05]
.984
[25.00]
Right-Angle
Part Number 120943
.236 ± .002
[6.00 ± 0.05]
Technical Documents
Part Number 1903978
Product Specification
108-1651 (UPM)
108-78387 (Slim UPM)
Application Specification
114-1103
No. of
Circuit
Positions
Instruction Sheet
408-4169 (Receptacle
Seating Tool 224421-X)
New short PCB tail available.
Contact Tyco Electronics for
more information.
3
4
5
6
7
8
9
Vertical
Standard Power
High Power
10 Amps/Contact 16 Amps/Contact
Part Numbers
Part Numbers
5223955-2
5-5223955-2
5223995-1
120953-1
5223995-2
120953-2
5223995-3
120953-3
5223995-4
120953-4
5223995-5
120953-5
5223995-6
120953-6
Right-Angle
High Power
16 Amps/Contact
Part Numbers
120943-1
120943-2
120943-3
120943-4
120943-5
120943-6
120943-7
Seating Tool
Slim UPM Vertical Receptacle
Number of Positions
Width
4
.236
[6.00]
Part Number
1903978-1
1903978-2
Note: All part numbers are RoHS compliant.
55
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
Z-PACK 2 mm Futurebus+ Power Modules
Vertical Pin Assemblies
with Solder Leads and
Compliant Press-Fit Leads
15.80
17.80
Board-to-Board Products
Material and Finish
Housing — Liquid crystal polymer
Pin Contacts — Phosphor bronze,
mating surface plating conforms to
all testing specified for Telcordia
Uncontrolled Environment, with entire
contact underplated with 0.00127 min.
nickel. See customer drawing for specific lead plating.
11.83
11.88
4 Row
5 Row
13.50
11.50
Related Product Data
Rows
Rows
A B C D E
A B C D
Current Rating — 5 Amps per contact
Mating Force — 2.4N per contact
max.
Unmating Force — 0.3N per contact
max.
Durability — 250 cycles
3.40
13.60
13.60
17.00
Mating
Post Length
(See Chart
Below.)
4.25
Technical Documents
Lead
Length
Product Specification
108-1441
4.25
Mating Post
Length (See
chart below)
Lead Length
3 Spaces at
2.00 = 6.00
4 Spaces at
2.00 = 8.00
Solder Leads
Application Specification
114-1075
Instruction Sheets
408-6927, 408-4157, 408-4488
Solder Leads
4.001
4.001
4 Spaces at
2.00 = 8.00
3 Spaces at
2.00 = 6.00
14.001
12.001
+0.101
1.50
-0.00
Dia. Typ.
(Drilled Hole)
10.00
Recommended PC Board Hole Layout
per IPC-D-300, Type II, Class C
(Component Side)
1Dimensions
+0.101
-0.00
Dia. Typ.
(Drilled Hole)
1.50
10.00
Recommended PC Board Hole Layout
per IPC-D-300, Type II, Class C
(Component Side)
apply to solder lead versions only.
1Dimensions
apply to solder lead versions only.
Reference specification 114-1075 for plated through hole requirements.
Number of
Positions
8
10
Mating Post
Lengths
.256
.285
.315
.256
.315
[6.50]
[7.25]
[8.00]
[6.50]
[8.00]
4.25
Solder Lead
5536600-1
5536625-1
5536623-1
—
—
Part
3.2
Solder Lead
5536628-1
—
—
—
—
Numbers
Press-Fit
5536603-1
—
5536620-1
5536642-1
5536642-7
Housing
Shroud
Seating
Tooling
536565-X
58512-1
223041-X
1214224-1
Note: All part numbers are RoHS compliant.
56
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
Z-PACK 2 mm Futurebus+ Power Modules (Continued)
Right-Angle
Receptacle Assemblies
with Solder Leads and
Compliant Press-Fit Leads
6.00
Board-to-Board Products
Material and Finish
5 Row
10.8 ±0.08
4 Row
+0.1
0.5 -0
22.45
2.25 Max.
(Point of Contact)
3.56 ±0.3 Typ.
13.30 ±0.1
8.8 ±0.08
2.25 Max.
(Point of Contact)
3.56 ±0.3 Typ.
+0.1
0.5 -0
20.45
11.30 ±0.1
Housing — Liquid crystal polymer
Receptacle Contacts — Phosphor
bronze, mating surface plating conforms
to all testing specified for Telcordia
Uncontrolled Environment, with entire
contact underplated with 0.00127 min.
nickel. See customer drawing for specific lead plating.
Technical Documents
Product Specification
108-1441
9.50
9.50
Application Specification
114-1075
Instruction Sheets
408-6927
4 Spaces at
2.00 = 8.00 Ref.
3 Spaces at
2.00 = 6.00 Ref.
+0.10
-0.00
Dia. Typ.
Drilled Hole
2.05
+0.10
3.00 ±0.15
-0.00
Dia. Typ.
(Drilled Hole)
1.50
12.00 Typ.
4.00
1.00
4.00
+0.10
-0.00
Dia. Typ.
(Drilled Hole)
1.50
+0.10
-0.00
Dia. Typ.
Drilled Hole
2.05
5 Spaces at
2.00 = 10.00 Ref.
1.00
3 Spaces at
2.00 = 6.00
4.00 Typ.
3.00±0.15
2.00 Typ.
4.00
4 Spaces at
2.00 = 8.00 Ref.
Recommended PC Board Hole Layout
per IPC-D-300, Type II, Class C
(Component Side)
Recommended PC Board Hole Layout
per IPC-D-300, Type II, Class C
(Component Side)
Reference specification 114-1075 for plated through hole requirements.
Number of
Positions
8
10
Part Numbers
Solder Tail Length
0.107 [2.73]
0.139 [3.53]
5536607-1
5536613-1
5223092-1
5223093-1
Press-Fit
0.140 [3.56]
Seating Tool
5536614-1
5536649-1
Industry Standard Flat Rock
Industry Standard Flat Rock
Note: All part numbers are RoHS compliant.
57
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
Backplane and Co-Planar Guide Modules
Un-keyed Guide Modules
Stainless Steel Pin
Die Cast Receptacle
Multiple thread lengths available
Gatherability +/-0.100"
Board-to-Board Products
L
.311
[7.90]
Seating Tool — Part Number 224440-1
Board Support Fixture —
Part Number 217603-1
Vertical Guide
Type
Dim. L
M4, 6.2 mm Thread Length
M4, 7.5 mm Thread Length
M4, 12.7 mm Thread Length
8-32, 12.7 mm Thread Length
M4, 9.2 mm Thread Length
M4, Internal Thread
1.235
1.269
1.491
1.491
1.353
1.378
[31.36]
[32.23]
[37.86]
[37.86]
[34.36]
[35.00]
Vertical
Guide
Pin
223956-1
223982-1
223969-1
223969-4
223969-7
1857988-1
Vertical Spacer
Part Number
Right-Angle
Vertical
Guide
Guide
Module
Module
Vertical
Spacer
Module
5223957-1
(As Shown)
1645545-1
(15 mm)
5223979-1
(with Dual
Mounting
Position)
1934988-1
1645545-2
(18 mm)
Keyed Guide Modules
Die Cast Pin and Receptacle
Keyed to prevent mis-mating daughter
cards
Multiple thread lengths available
Gatherability +/-0.100"
.311
[7.90]
Part Number
Type
Right-Angle Guide Module
4-40
M2.5
5223986-1
5120913-1
5223986-3
5120913-3
5223986-5
5120913-5
5223986-6
5120913-6
0°
90°
180°
225°
Vertical Pin
Right-Angle
Pin
5223985-1
1469265-1
1469265-3
1469265-5
1469265-6
AdvancedTCA
Guide Modules
Die Cast Pins and Receptacles
Keyed to prevent mis-mating daughter
cards
Twin Pins — provide more keying
options
Meets PICMG 3.0 Specifications
Gatherability +/-0.50"
.394
[10.00]
Type
Right-Angle Pin Long
Vertical Pin Short
Vertical Pin Long
Right-Angle Receptacle
Single Pin Rear Assembly
Both Pins
Keyed 0°
1-1469372-1
1-1469387-1
1-1469388-1
1-1469373-1
—
Part Number
Top Pin Keyed 270°
Bottom Pin Keyed 90°
3-1469372-7
3-1469387-7
3-1469388-7
3-1469373-7
—
Not Keyed
AdvancedTCA
Module
Designation
—
—
—
1469374-1
1469269-X*
A2
A1
A2
K1/K2
rK1
*-X identified by PCB thickness. See customer drawing for details.
AdvancedTCA is a trademark of
PICMG-PCI Industrial Computer
Manufacturers Group, Inc.
Note: All part numbers are RoHS compliant.
58
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
Backplane and Co-Planar Guide Modules (Continued)
10.8 Guide Modules
.425
[10.80]
Board-to-Board Products
Rugged design — to support heavier
cards
Better gatherability +/-3.5 mm
10.8 mm width
Die Cast Pin
Die Cast Receptacle
ESD Ground Option
Finish: Nickel plated
Part Number
Type
0
90
180
225
Right-Angle
With ESD
Without ESD
1-1410297-1
1-1410546-1
1-1410297-3
1-1410546-3
1-1410297-5
1-1410546-5
1-1410297-6
1-1410546-6
Vertical Pin
Internal M3.5 Thread
External M5 Thread
1410548-3
1-1410773-2
*See customer drawing for dash numbers
9.0 VITA 46 Guide Modules
Die Cast Pins and Receptacles
Keyed to prevent mis-mating daughter
cards
Meets VITA 46 Specification
Gatherability +/-3.5 mm
Finish: Silver plated
Type
.354
[9.00]
Type
0°
45°
90°
270°
315°
Un-keyed
Double-Ended
Right-Angle*
1-1469492-1
1-1469492-2
1-1469492-3
1-1469492-7
1-1469492-8
1-1469492-9
10 mm
Part Number
Vertical Pin Thread Depth
11.6 mm
1-1469491-2
1-1469491-3
Part Number
Vertical Pin
1410956-1
13.1 mm
1-1469491-4
*Mounting screw Part Number 1410946-X required
VITA 41 Guide Modules
Die Cast Pins and Receptacles
Meets VITA 41 Specification
Gatherability +/-2 mm
Finish: Clear Chromate
Key
0°
270°
Vertical Short Pin
1410962-1
1410962-7
Part Number
Vertical Long Pin
1410963-1
1410963-7
Right-Angle Module
1410465-1
1410465-7
7.2 Thin Guide Modules
Die Cast Pin and Receptacle
7.2 mm width
Gatherability +/-2.5 mm
Finish: Trivalent Chromium
.283
[7.20]
Right-Angle
Note: All part numbers are RoHS
compliant.
1410714-3
Part Number
Vertical Pin Thread Length
8.7 mm
11.6 mm
1-1410710-1
1-1410710-3
59
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
METRIC
Dimensions are
millimeters over inches
Power Connectors & Interconnection Systems
Z1 Power Connector for AdvancedTCA Zone 1 Applications
Board-to-Board Products
Product Facts
■
Designed to PICMG 3.0
Standard
■
High conductivity copper
alloy on Size 16 power
contacts
■
.76 micro-meters
[30 microinch] gold over
1.27 micrometers
[50 microinch] nickel
plating at contact interface
■
Gold-thickness controlled on
inside of socket and outside
of pin — at contact interface
points
■
RoHS compliant
■
Stainless steel spring
provides contact normal
force — resists relaxation at
elevated temperatures
■
Eye of the needle compliant
press-fit termination
■
No special tools needed to
seat connectors to PCB —
standard Flat-Rock seating
tools
■
Additional PCB retention
hardware not required
Technical Documents
Product Specification
108-2216
Application Specification
114-13156
Industry Standard
PICMG 3.0, Rev. 2.0
Introduction
Tyco Electronics supplies
both the power and the
signal connectors
specified in the Advanced
Telecommunications
Computer Architecture
(AdvancedTCA) Standard.
This standard (PICMG 3.0)
is one of the latest standards addressing future
telecommunications needs.
The AdvancedTCA Power
Connector, designated for
use in Zone 1 per PICMG
3.0, combines 8 High
Conductivity Size 16 pin &
socket contacts along with
22 Size 22 pin & socket
contacts, plus guidance
into a compact interface.
Both connector halves
feature proven compliant
press-fit contacts for easy
solder-less termination to
printed circuit boards.
Based on years of reliable
long-term field installations
the power contact design is
based upon Tyco Electronics’
famous Type III+ contact
design. By adding the use
of a high conductivity copper alloy and the low-force
Eye-Of-Needle compliant
pin section, the new contact delivers both ease of
installation (with flat-rock
seating tools) as well as
industry-leading current
carrying capability. The
power contacts are capable
of carrying 20 amps per
contact and the signals are
capable of carrying 2 amps
per contact.
The housing design also
offers improvements compared to other industry
alternatives. The lead-in
design for the contact
cavities provides better
resistance from contact
stubbing. The contact
retention has also been
designed to eliminate the
need for additional hardware sometimes used to
hold the connectors to
the PCB after pressing in to
the PCB.
Typical Electrical Properties
Current Ratings — tested in
accordance with CSA C22.2 No.
182.3-M1987 and IEC 60512-3, Test 5a
requirements:
Positions 1–24, 27, 32 — 1 Amp each,
per the PICMG 3.0 Specification
Positions 25, 26, 28–31, and 34 —
20 Amps each, exceeds the PICMG 3.0
Specification
Dielectric Withstanding Voltage —
Positions 1–16 — 1000 Volts rms
Positions 17–24 — 2000 Volts rms
Positions 25–34 — 2000 Volts rms
Environmental Parameters
Maximum Continuous Operating
Temperature — 105°C
Durability Rating — 250 cycles, per
PICMG 3.0
The result is a connector
which is easy to install,
meets all the PICMG 3.0
performance requirements
and stays retained to the
PCB without the additional
labor required to add
hardware.
AdvancedTCA and PICMG are
trademarks of the PICMG-PCI Industrial
Computer Manufacturers Group, Inc.
60
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
METRIC
Dimensions are
millimeters over inches
Power Connectors & Interconnection Systems
Z1 Power Connector for AdvancedTCA Zone 1 Applications (Continued)
Material and Finish
Insulators — Thermoplastic, glass
reinforced, UL 94V-0
Signal Pins — Copper alloy
Power Contacts — High conductivity
copper alloy, plated 0.00076 [.000030]
min. gold in mating area over 0.00127
[.000050] min. nickel
Compliant PCB Tails — 0.0030 –
0.0043 [.000120 – .000170] tin plated,
matte finish
Notes:
1. Mounting hardware — self tapping
screw (customer supplied) can be
used but not required on receptacle
2. Positions 1–4 not populated and
reserved for future use for 308
22 position connectors.
10.35
[.407]
20.90
[.823]
Board-to-Board Products
17.50
[.689]
28.60
[1.126]
41.3
Max.
[1.626]
Right-Angle Plug
Part Number
1766502-1
1766502-2
1766500-1
1766500-2
1888803-1
1888803-2
Power
Contacts
Signal
Contacts
14
8
22
26
46.10
[1.815]
Tail Type
Sn Press-Fit
SnPb Press-Fit
Sn Press-Fit
SnPb Press-Fit
Sn Press-Fit
SnPb Press-Fit
6.20
Max.
[.224]
20.90
[.823]
28.60
[1.126]
22.40
Max.
[.882]
17.50
[.689]
Vertical Receptacle
Part Number
1766503-1
1766503-2
1766501-1
1766501-2
1888804-1
1888804-2
Power
Contacts
Signal
Contacts
14
8
22
26
Tail Type
Sn Press-Fit
SnPb Press-Fit
Sn Press-Fit
SnPb Press-Fit
Sn Press-Fit
SnPb Press-Fit
Note: All part numbers are RoHS compliant.
61
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
工商网监
湘ICP备2023018690号
