6751546-6

107-68640 Packaging Specification 10Apr2012 Rev G CABLE ASSY, SAS TO SAS 1. PURPOSE 目的 Define the packaging specifiction and packaging method of CABLE ASSY, SAS TO SAS. 订定 CABLE ASSY, SAS TO SAS 产品之包装规格及包装方式。 2. APPLICABLE PRODUCT 适用范围 Product Description Part No. 1812765-1~13 CABLE ASSY, SAS TO SAS 6751546-1~15 CABLE ASSY, CX4 TO CX4 2-6751546-0/1 CABLE ASSY, CX4 TO CX4 3. PACKAGING MATERIAL 包装材料 Part No. 1533282-5 1533283-1 110455-2 623868-1 623180-2 623865-4 12120-1 115216 292906-9 1533040-4 623227-6 623227-7 623865-1 Outer pkg 1533282-4 Inner pkg 623880-3 Product 1812765-1 2/1 1/1 - - 2/20 1/1 1/1 1/1 1/20 - - - - - 1/20 1812765-2 2/1 1/1 - - 4/20 1/1 1/1 1/1 - 1/20 - - - - 1/20 1812765-3 2/1 1/1 - - 4/15 1/1 1/1 1/1 - 1/15 - - - - 1/15 1812765-4 2/1 1/1 - - 6/10 1/1 1/1 1/1 - 1/10 - - - - 1/10 1812765-5 2/1 1/1 - - 2/15 1/1 1/1 1/1 - - 1/15 - - - 1/15 1812765-6 2/1 1/1 - - 2/15 1/1 1/1 1/1 - - 1/15 - - - 1/15 1812765-7 2/1 1/1 - - 2/10 1/1 1/1 1/1 - 1/10 - - - - 1/10 1812765-8 2/1 1/1 - - 2/10 1/1 1/1 1/1 - - 1/10 - - - 1/10 1812765-9 2/1 1/1 - - 2/6 1/1 1/1 1/1 - - 1/6 - - - 1/6 1-1812765-0 2/1 1/1 - - 2/6 1/1 1/1 1/1 - - 1/6 - - - 1/6 1-1812765-1 2/1 - 1/1 - 2/5 1/1 1/1 1/1 - - 1/5 - - - 1/5 1-1812765-2 2/1 1/1 - - 4/20 1/1 1/1 1/1 - 1/20 - - - - 1/20 1-1812765-3 2/1 1/1 - - 6/20 1/1 1/1 1/1 - 1/20 - - - - 1/20 6751546-1 2/1 1/1 - - 6/20 - - 1/1 - 1/20 - - - - 1/20 6751546-2 2/1 1/1 - - 4/20 - - 1/1 - 1/20 - - - - 1/20 6751546-3 2/1 1/1 - - 6/15 - - 1/1 - 1/15 - - - - 1/15 DR CHK APVD Sam Wu Link Tian Ansin Yang Tyco Electronics AMP Guangdong Ltd. East Rongqi Road, Ronggui Town, Shunde, Foshan, Guangdong, P.R. China QR-ME-030C * Trademark | Indicates change 1 of 3 LOC FR 107-68640 3. PACKAGING MATERIAL 包装材料 Part No. 1533282-5 1533283-1 110455-2 623868-1 623180-2 623865-4 12120-1 115216 292906-9 1533040-4 623227-6 623227-7 623865-1 Outer pkg 1533282-4 Inner pkg 623880-3 Product 6751546-4 2/1 1/1 - - 2/10 - - 1/1 1/10 - - - - - 1/10 6751546-5 2/1 1/1 - - 2/15 - - 1/1 - - 1/15 - - - 1/15 6751546-6 2/1 1/1 - - 2/15 - - 1/1 - - 1/15 - - - 1/15 6751546-7 2/1 1/1 - - 2/10 - - 1/1 1/10 - - - - - 1/10 6751546-8 2/1 1/1 - - 2/10 - - 1/1 - - 1/10 - - - 1/10 6751546-9 2/1 1/1 - - 2/6 - - 1/1 - - 1/6 - - - 1/6 1-6751546-0 2/1 1/1 - - 2/6 - - 1/1 - - 1/6 - - - 1/6 1-6751546-1 2/1 - 1/1 - 2/5 - - 1/1 - - 1/5 - - - 1/5 1-6751546-2 2/1 - 1/1 - 2/5 - - 1/1 - - 1/5 - - - 1/5 1-6751546-3 2/1 - 1/1 - 2/5 - - 1/1 - - 1/5 - - - 1/5 1-6751546-4 2/1 - - 1/1 4/3 - - 1/1 - - 1/3 - - - 1/3 1-6751546-5 2/1 - - 1/1 2/3 - - 1/1 - - - 1/3 - - 1/3 2-6751546-0 2/1 1/1 - - 6/15 - - 1/1 - 1/15 - - 1/15 1/15 1/15 2-6751546-1 2/1 1/1 - - 2/15 - - 1/1 - 1/15 - - 1/15 1/15 1/15 Inner Middle Outer LABEL 623865-4 - 623865-1 SEALING Heat-seal - Tape 4. PACKAGING QUANTITY 包装数量 Part No. Inner Middle Outer 1871765-1/2/12/13 1 pcs/bag - 20 pcs/box 1812765-3/5/6 1pcs/bag - 15 pcs/box 1812765-4/7/8 1pcs/bag - 10 pcs/box 1812765-9/10 1pcs/bag - 6 pcs/box 1-1812765-1 1pcs/bag - 5 pcs/box 6751546-1/2 1 pcs/bag - 20 pcs/box 6751546-3/5/6 1 pcs/bag - 15 pcs/box 6751546-4/7/8 1 pcs/bag - 10 pcs/box 6751546-9/10 1 pcs/bag - 6 pcs/box 1-6751546-1/2/3 1 pcs/bag - 5 pcs/box 1-6751546-4/5 1 pcs/bag - 3 pcs/box 2-6751546-0/1 1 pcs/bag - 15 pcs/box Rev G QR-ME-030C 2 of 3 107-68640 5. PACKING METHOD 包装方法 5.1. Place package connectors of cables with bubble bag and tie with wire tie. 用气泡袋将CABLE两端的连接头包好后并用扎带扎好。 5.2. Coil cable to fit bag & with wire tie & into relevant polybag and heat seal it. 盘绕适当大小尺寸(依据袋子)的CABLE后并用扎带扎好后放入相应的塑料袋中并热封其开口。 FOR 1812765-X: 5.3.1. Stick the bag label on the middle of the bag. 在袋子的中间位置上贴一内标签(623865-4，SAP系统标签)。 注：如果客户是出货至华为，需加贴一客户标签(623868-1)和19条码标签(623180-2)。其标签样式如下图示: 　　客户标签格式 19条码标签格式 FOR 6751546-X: 5.3.2. Stick the bag label on the middle of the bag. 在袋子的中间位置上贴一内标签。 5.4. Set up a box and secure bottom flaps with tape. 折叠好一包装箱，并用胶带封好箱底。 5.5. Place proper bubble pack based on 3. into the bottom of box, bubble facing down. 根据3中的用量在箱底放入适当的气泡垫，气泡面朝下. 注: 上下的气泡垫的用量一样。 5.6. Place qty as 4 into box. Inner label facing up. 按4中规定数量将产品整齐放入箱中，有内标签的一面朝上。 5.7. Place proper bubble pack based on 3. on the top of cables, bubble facing up. 根据3中的用量在CABLE的上面放入适当的气泡垫，气泡面朝上。(注:同5.5.) 5.8. Seal the box with tape. And place product identification label and in "product id" marked on box. 用胶带封箱，在箱外印有“PRODUCT ID”标识处贴上外标签。 注：对于2-6751546-0/1，需要在外标签旁加贴UL标签。 Rev G QR-ME-030C 3 of 3