7-1415029-1

General Purpose Low Power PCB Relays SCHRACK Miniature Power PCB Relay PB n 1pole 10A, 1 form C (CO) or 1 form A (NO) cadmium-free contacts n Class F coil system standard n Compact and simple design gives high process security n Product in accordance to IEC 60335-1 n Environmentally-friendly Typical applications White goods, small home appliances, heating temperature controllers. Z Approvals Coil Data VDE Cert. No. 40008364, UL E214025 Coil voltage range Operative range, IEC 61810 Technical data of approved types on request. Contact Data Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 10A Limiting making current, max 4 s, duty factor 10% 15A Breaking capacity max. 2500VA Contact material AgNi 90/10, AgSnO2 Frequency of operation, with/without load 360/36000h-1 Operate/release time max. 10/20ms Bounce time max., form A/form B 10/15ms Contact ratings Type Contact Load Cycles IEC 61810 PB114; PB113 A/B (NO/NC) 10A/3A, 250VAC, cosφ=1, 85°C 30x103 PB114 A of C 10A, 250VAC, cosφ=1, 85°C 30x103 PB134; PB133 A (NO) 10A, 250VAC, cosφ=1, 85°C 20x103 PB134 A (NO) 6.5A, 440VAC, cosφ=1, 85°C 50x103 PB634 A (NO) 8.5A, 250VAC, cosφ=1, 85°C 100x103 PB634 A (NO) 10A, 250VAC, cosφ=1, 85°C 60x103 UL 508 PB1x4 A (NO) 10A, 250VAC, cosφ=1, 85°C 20x103 Mechanical endurance, DC coil PB1 PB5 PB6 5 to 48 VDC 5 to 24 VDC 5 to 24 VDC 2 2 2 Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW Coil versions, DC-coil, 360mW 005 5 3.75 0.5 70 357 006 6 4.50 0.6 100 360 009 9 6.75 0.9 225 360 012 12 9.00 1.2 400 360 018 18 13.50 1.8 900 360 022 22 16.50 2.2 1344 360 024 24 18.00 2.4 1600 360 048 48 36.00 4.8 6400 360 Coil versions, DC-coil, 500mW 005 5 3.75 0.5 48 521 006 6 4.5 0.6 69 522 012 12 9 1.2 274 526 024 24 18 2.4 1097 525 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. 5x106 operations Insulation Data Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil form C (CO) version form A (NO) version Material group of insulation parts Tracking index of relay base 10-2014, Rev. 1014 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 1000Vrms 2500Vrms ≥3/4mm ≥4/5mm IIIa PTI250 Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Low Power PCB Relays SCHRACK Miniature Power PCB Relay PB (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire version PB1, PB5 according EN60335, par.30 Ambient temperature, DC coil -40 to +85°C Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional), form A/form B, 30 to 400Hz PB1, PB6 >10/4g PB5 >10/6 g Shock resistance (destructive) >100g Terminal type PCB-THT Weight 5.4g Resistance to soldering heat THT IEC 60068-2-20 270°C/10s Packaging/unit tube/35 pcs., box/1050 pcs. PCB layout1) ​/ ​ terminal assignment Bottom view on solder pins Dimensions 1) Layout note: No openings (e.g. holes, slots, cut­outs, unused pins, open through connections, etc.) allowed under the relay base. The relay base must be fully covered by the PCB, recommended minimum distance between the relay and the edge of the printed circuit board is 5 ​mm. For more information, please contact our application support. Product code structure Typical product code Type PB Miniature Power PCB Relay PB Version 1 Standard version 5 6 Contact arrangement 1 1 form C contact (1 CO) 3 Contact material 3 AgSnO2 4 Coil Coil code: please refer to coil versions table Product code Version 500 mW version High performance version (form A version only) 1 form A contact (1 NO) AgNi 90/10 Contacts Contact material PB114005 Standard 1 form C AgNi ​90/10 PB114006 class F 1 CO contact PB114012 PB114024 PB134005 1 form A PB134006 1 NO contact PB134012 PB134024 PB514012 500 ​mW 1 form C PB514024 version 1 CO contact PB634005 High 1 form A PB634006 performance 1 NO contact PB634012 version PB634024 2 10-2014, Rev. 1014 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. PB 1 1 4 012 Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Coil 5VDC 6VDC 12VDC 24VDC 5VDC 6VDC 12VDC 24VDC 12VDC 24VDC 5VDC 6VDC 12VDC 24VDC Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 6-1415029-1 7-1415029-1 8-1415029-1 9-1415029-1 1415030-1 1-1415030-1 2-1415030-1 3-1415030-1 2-1415538-5 5-1415535-6 3-1415541-8 3-1415541-9 4-1415541-1 4-1415541-2 Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change.