7-1415504-1

General Purpose Relays PCB Relays SCHRACK Power PCB Relay RX2 n 2 pole 8A, 2 form C (CO) contacts or AC coil n Reinforced insulation n Height 15.7mm n Transparent cover optional n DC Typical applications Domestic appliances, heating control, emergency lighting, automatic doors S0271-A VZ Approvals Coil Data VDE REG.-Nr. A651, UL E214025 Coil voltage range DC coil AC coil Operative range, IEC 61810 Coil insulation system according UL1446 Technical data of approved types on request Contact Data Contact arrangement 2 form C (CO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 8A Limiting making current, max 4 s, duty factor 10% 15A Breaking capacity max. 2000VA Contact material AgNi 90/10 Frequency of operation, with/without load 360/36000h-1 Operate/release time max., DC coil 8/6ms Bounce time max., DC coil, form A/form B 4/10ms Contact ratings Type Contact IEC 61810 RX424 A/C (NO/CO) RX424 B (NC) UL 508 RX424 A/B (NO/NC) Load Cycles 8A, 250VAC resistive, 70°C 8A, 250VAC resistive, 70°C 40x103 60x103 8A, 250VAC, general purpose 70°C 40x103 Mechanical endurance DC coil AC coil >5x106 operations >1x106 operations Coil versions, DC coil Coil Rated Operate code voltage voltage VDC VDC 005 5 3.5 006 6 4.2 012 12 8.4 024 24 16.8 048 48 33.6 060 60 42.0 110 110 77.0 5 to 110VDC 24 to 230VAC 2 class F Release voltage VDC 0.5 0.6 1.2 2.4 4.8 6.0 11.0 Coil resistance Ω±10% 50 68 274 1095 4380 6845 23010 Rated coil power mW 500 529 526 526 526 526 526 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Coil versions, AC coil Coil Rated Operate code voltage voltage VAC VAC 524 24 18.0 615 115 86.3 730 230 172.5 Release voltage VAC 3.6 17.3 34.5 Coil resistance Ω±15%1) 3501) 8100 32500 Rated coil power VA 0.76 0.76 0.74 1) Coil resistance ±10%. All figures are given for coil without pre-energization, at ambient temperature +23°C, 50Hz. Other coil voltages on request. 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays SCHRACK Power PCB Relay RX2 (Continued) Insulation Data Initial dielectric strength between open contacts between contact and coil between adjacent contacts Clearance/creepage between contact and coil between adjacent contacts Material group of insulation parts Tracking index of relay base PCB layout / terminal assignment Bottom view on solder pins 1000Vrms 4000Vrms 2500Vrms ≥ 8/8mm ≥ 3/4mm IIIa PTI250V Other Data S0418-CA Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 70°C Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional), form A/form B, 10 to 150Hz 20/4g Shock resistance (destructive) 100g Terminal type standard version (white cover) PCB-THT, plug-in transparent version PCB-THT Mounting distance standard version (white cover) ≥ 2.5mm transparent version ≥ 5mm Weight 14g Resistance to soldering heat THT IEC 60068-2-20 270°C/10s Packaging/unit tube/20 pcs., box/500 pcs. *) With the recommended PCB hole sizes a grid pattern from 2.5​mm to 2.54​mm can be used. 2 form C (CO) contacts S0163-BJ Dimensions Accessories For standard version (white cover), details see datasheet Accessories Industrial Power Relay RT NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. S0272-BA Product code structure Typical product code RX 4 2 4 012 Type RX Power PCB Relay RX2 Version 4 8A, pinning 5mm, flux proof Contact configuration 2 2 form C (CO) contacts Contact material 4 AgNi ​90/10 Coil Coil code: please refer to coil versions table Cover Blank Standard cover (white) C Transparent cover (clear) Product code Version Contacts Contact material Coil Cover RX424005 8A 2 form C (CO) AgNi ​90/10 5VDC White RX424006 pinning 5mm contacts 6VDC RX424012 flux proof 12VDC RX424012C Transparent RX424024 24VDC White RX424024C Transparent RX424730 230VAC RX424730C Transparent This list represents the most common types and does not show all variants covered by this datasheet. Other types on request 2 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 5-1415525-1 5-1415524-1 2-1415504-1 5-1415504-1 3-1415504-1 6-1415504-1 4-1415504-1 7-1415504-1 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.