7-1542001-9

8 7 6 4 5 3 2 1 REVISION(S) 1.375 DIA. 3-FIN HS: 0.498 HT. 2 LTR DESCRIPTION A ECR-05-017301 INIT APP'D E.T 12/15/05 A.I 12/16/05 D D NOTE: 1. MATERIAL: HEAT SINK: ALUM. (BLACK ANODIZE) CLIP: BLACK PEI (UL94-VO) 3 1 2. BEFORE THE HEATSINK APPLICATION, THE USER SHOULD IDENTIFY THE SPECIFICATION OF MAXIMUM LOAD ON THE BGA PACKAGE. 4-LEG CLIP SIZE: 35mm HEATSINK TORQUE SPECIFICATIONS CONVERTED TO FORCE. BARE DIE PACKAGE: 2.0 INCH - LB TORQUE = 8.1 LBS FORCE 2.5 INCH - LB TORQUE =10.1 LBS FORCE C C FULL SIZE LID PACKAGE: 2.0 INCH - LB TORQUE = 6.9 LBS FORCE 2.5 INCH - LB TORQUE = 8.7 LBS FORCE .016±.002 3. REMOVE CLIP WITH REMOVAL TOOL P/N: 1542616-1. 4. RoHS COMPLIANT AND CERTIFIED. 1.375 ±.020 DETAIL A SCALE = 6X B .113 .361 MAX .498 B A 1"-27 UNS - 2A THREAD 1.385 1.381 LIP LEG Power A 7 ° C/W @ ° C/W @ ° C/W @ ° C/W @ Ambient 200 LFM 400 LFM 600 LFM 5 Watts 10 Watts 12.14 11.21 5.64 5.94 3.70 3.86 2.60 2.77 15 Watts 10.41 6.24 3.87 2.83 ITEM DESCRIPTION QTY 1 MOUNTING CLIP 1 2 HEAT SINK 1 3 INTERFACE 1 DO NOT SCALE 1.483 8 .279 ±.005 B .142±.005 B UNLESS OTHERWISE SPECIFIED TOLERANCES ARE: .XX .XXX .XXXX ANGLES . DRAWN BY: DATE E.TAO ENGINEER: . FILENAME CUSTOMER DRAWING SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE MATERIAL: 12/15/05 SEE NOTE DATE A.ILA . SECTION B-B 12/16/05 PROJECT SYSTEM CONFIDENTIAL PROPERTY OF TYCO ELECTRONICS. NOT TO BE DISCLOSED TO OTHERS. REPRODUCED OR USED FOR ANY PURPOSES EXCEPT AS AUTHORIZED IN WRITING BY AN AUTHORIZED OFFICIAL OF TYCO. MUST BE RETURNED TO TYCO ON DEMAND, ON COMPLETION OF ORDERS OR OTHER PURPOSES FOR WHICH LENT. DIMENSONS ARE IN: FINISH: INCHES SEE NOTE SCALE: 1.5:1 SIZE: TNIRD ANGLE PROJECTION A TITLE: 35mm HEATSINK ASSEMBLY (HTS338-P) PART NO: 7-1542001-9 DWG. NO. C-7-1542001-9 SHEET: 1 OF 1 REV: A A