7-1542008-9

8 7 6 4 5 3 2 1 REVISION(S) D 2 2.000 DIA. 0.482 HT. 3-FINS HEATSINK: LTR DESCRIPTION A B B1 0S60-0009-04 ECO-05-008423 ECR-05-017787 INIT APP'D E.T 1/13/04 S.D 1/13/04 E.T 9/14/05 B.P 12/1/05 E.T 12/13/05 B.P 12/13/05 D NOTE: 1. MATERIAL: HEAT SINK: ALUM. (BLACK ANODIZE) CLIP: BLACK PEI (UL94-VO) 1 2. BEFORE THE HEATSINK APPLICATION, THE USER SHOULD IDENTIFY THE SPECIFICATION OF MAXIMUM LOAD ON THE BGA PACKAGE. 2-LEGS CLIP SIZE: 21mm 3 HEATSINK TORQUE SPECIFICATIONS CONVERTED TO FORCE. BARE DIE PACKAGE: 1.5 INCH - LB TORQUE = 8.5 LBS FORCE 2.0 INCH - LB TORQUE =11.4 LBS FORCE C C FULL SIZE LID PACKAGE: 1.5 INCH - LB TORQUE = 8.3 LBS FORCE 2.0 INCH - LB TORQUE = 11.1 LBS FORCE .017±.002 3. REMOVE CLIP WITH REMOVAL TOOL P/N: 1542616-1. 4. RoHS COMPLIANT AND CERTIFIED. 2.000±.020 DETAIL A SCALE 6X B B .098 .355 MAX A .240±.005 5/8" - 27 UNS - 2A THREAD B .113±.005 .831 LIP LEG .946 8 7 5 Watts 8.78 4.22 2.75 2.18 10 Watts 8.07 4.43 2.61 2.06 15 Watts 7.62 4.26 2.60 2.03 ITEM DESCRIPTION QTY 1 MOUNTING CLIP 1 2 HEAT SINK 1 3 INTERFACE 1 SECTION B-B ° C/W @ ° C/W @ ° C/W @ ° C/W @ Ambient 200 LFM 400 LFM 600 LFM Power DO NOT SCALE A B .482 UNLESS OTHERWISE SPECIFIED TOLERANCES ARE: .XX .XXX .XXXX ANGLES . DRAWN BY: DATE ENGINEER: . FILENAME SEE NOTE DATE 01/13/04 S.DELPRETE . SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE MATERIAL: 01/13/04 E.TAO CUSTOMER DRAWING PROJECT SYSTEM CONFIDENTIAL PROPERTY OF TYCO ELECTRONICS. NOT TO BE DISCLOSED TO OTHERS. REPRODUCED OR USED FOR ANY PURPOSES EXCEPT AS AUTHORIZED IN WRITING BY AN AUTHORIZED OFFICIAL OF TYCO. MUST BE RETURNED TO TYCO ON DEMAND, ON COMPLETION OF ORDERS OR OTHER PURPOSES FOR WHICH LENT. DIMENSONS ARE IN: FINISH: INCHES SEE NOTE SCALE: 1.25:1 SIZE: TNIRD ANGLE PROJECTION A A TITLE: 21mm HEATSINK ASSEMBLY SHEET: PART NO: 7-1542008-9 DWG. NO. C-7-1542008-9 1 OF 1 REV: B1