7724S0664-96

7724S0664 SPECIFICATION CONTROL DRAWING 77 OHM, AWG 24, 7 STRANDS OF .0076, DATA BUS CABLE, OUTER SPACE USE CHEMINAX Date: Revision: 8-8-18 D THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS DIMENSIONS ARE NOMINAL VALUES IN INCHES, UNLESS OTHERWISE DESIGNATED. ELECTRICAL CHARACTERISTICS CHARACTERISTIC IMPEDANCE 77 ± 7 ohms, Method C at 1 MHz MUTUAL CAPACITANCE 30.0 pF/ft. (maximum) ATTENUATION 2.0 dB/100 ft. (nominal) at 1 MHz SURFACE TRANSFER IMPEDANCE 250 milliohms/meter (nominal) at 10 MHz .0230 .047 ± .002 .101 CONDUCTORS AWG 24, 7 Strands of .0076, Silver-Coated HighStrength Copper Alloy DIELECTRICS Radiation-Crosslinked, Modified ETFE Colors - Light Blue/White SHIELD - Flat .0015 Strand Thickness, Silver-Coated Copper, ADDITIONAL REQUIREMENTS COMPONENT WIRE PRIOR TO CABLING (Test procedures per SAE AS22759) CONDUCTOR RESISTANCE CROSSLINKING PROOF TEST INSULATION (DIELECTRIC) ELONGATION TENSILE STRENGTH INSULATION FLAWS SPARK TEST IMPULSE TEST INSULATION RESISTANCE LOW TEMPERATURE-COLD BEND SHRINKAGE 28.2 ohms/1000 ft. (nominal) 300 ± 3°C for 1 hour, .500 inch mandrel, .375 lb, 2.5 kV dielectric test 50% (minimum) 5000 lbf/in2 (minimum) 3.0 kV (rms) 8.0 kV (peak) 5000 megohms for 1000 ft. (minimum) -65 ± 3°C for 4 hours, .500 inch mandrel, 1.00 lb, 2.5 kV dielectric test 200 ± 3°C for 1 hour, .125 inch (maximum) in 12 inches FINISHED CABLE (Test procedures per NEMA WC 27500, unless otherwise specified) .111 (nominal) .116 (maximum) JACKET Radiation-Crosslinked, Modified ETFE BLOCKING CABLE LAY LENGTH CROSSLINKED VERIFICATION FLAMMABILITY (Method B of Spec 1200) JACKET ELONGATION TENSILE STRENGTH JACKET FLAWS SPARK TEST IMPULSE TEST JACKET THICKNESS LOW TEMPERATURE-COLD BEND SHIELD COVERAGE VOLTAGE WITHSTAND (DIELECTRIC) WEIGHT 200°C for 6 hours .75 inch (minimum), 1.25 inches (maximum) 300 ± 5°C for 6 hours, 3.00 inch mandrel 3 seconds (maximum), 3 inches (maximum); no flaming of facial tissue 50% (minimum) 5000 lbf/in2 (minimum) 1.0 kV (rms) 6.0 kV (peak) .0045 (minimum), .0050 inch (nominal) -55 ± 5°C for 4 hours, 3.00 inch mandrel 90% (minimum) 1000 volts (rms) (minimum) 8.0 lbs/1000 ft. (nominal) OUTER SPACE REQUIREMENTS RADIATION RESISTANCE VACUUM STABILITY Designate outer jacket color with a dash number in accordance TOTAL MASS LOSS (TML) with MIL-STD-681. Unless otherwise specified, outer jacket color VOLATILE CONDENSABLE will be white designated by a "-9" appended to the part number, MATERIAL (VCM) e.g. 7724S0664-9. WEIGHT LOSS Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. 500 megarads/3.25 inch mandrel 1.00% (maximum) 0.10% (maximum) 0.45% (maximum) ENGINEERING REFERENCE TEMPERATURE RATING 200°C (maximum) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Cheminax, Raychem, TE Connectivity, and TE connectivity (logo) are trademarks. Raychem Wire & Cable 501 Oakside Avenue Redwood City, California 94063-3800 Phone: 1-800-522-6752 Fax: 1-650-361-6297 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. © 2006-2018 TE Connectivity Ltd. family of companies. All Rights Reserved.