776228-1

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 1 20 REVISIONS ALL RIGHTS RESERVED. BY - P LTR DESCRIPTION 47.4 4X ( ( 19.25 ) 1 25MAR2020 JM DS C16 REVISED PER PCN E-20-016603 20NOV2020 PN DS REVISED PER ECN-21-123056 08NOV2021 DK CB SUGGESTED MOUNTING SCREW SIZE IS n 2.50-3.00mm [ n 0.099 - 0.118 INCH] SELF TAPPING THREAD FORMING SCREW, SUCH AS DELTA PT, TO BE DRIVEN AT 0.6-0.8 N-m THE CUSTOMER SHOULD TEST THE SCREW SIZE AND TYPE IN ORDER TO VERIFY THEIR SELECTION FOR THEIR APPLICATION 2 DATE CODE IN THIS LOCATION USING 5 DIGIT CODE FIRST 2 DIGITS = YEAR, SECOND 2 DIGITS = WEEK, LAST DIGIT = DAY 2.17 ) ( 15 ) 3 ( 43.4 ) 1 ( 13.5 ) 2X ( 2 ) 4 GASKET APVD REVISED PER ECO-20-004256 1 ( 60.8 ) DWN C15 D D DATE D MATERIALS: HEADER HOUSING - GLASS FILLED PBT PINS - TIN OR GOLD PLATED BRASS GASKET - SILICONE HOUSING COLORS ARE MECHANICALLY KEYED TO MATE ONLY WITH IDENTICALLY COLORED PLUG ASSEMBLIES. 5. HEADER MATES TO PLUG ASSEMBLY 770680 WHICH USES REELED TERMINAL 770520 OR LOOSE PIECE TERMINAL 770854 ( 32.1 ) 18.1 ( 23.6 ) CONTACT C 2X ( C 1.5 ) 2X ( 2 ) HOUSING (7.30-7.75) 50.4 SECTION A-A 2 B B 776228-1 BLUE GOLD 1-776228-5 NATURAL GOLD 1-776228-2 GRAY GOLD BLACK DIMENSIONS: mm 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL 0.2 - FINISH 3 4805 (3/13) TOLERANCES UNLESS OTHERWISE SPECIFIED: 3 05MAR2010 CHK 22MAR2010 APVD 27APR2010 D. STRAUSSER D.STRAUSSER D. STRAUSSER NAME 108-1329 APPLICATION SPEC 114-16016 WEIGHT 22.68g CUSTOMER DRAWING 776228-2 TIN 4 776228-1 PLATING A PART NUMBER TE Connectivity PRODUCT SPEC - 776228-4 TIN BLACK HEADER COLOR 776228-5 TIN NATURAL DWN 1-776228-1 TIN GRAY THIS DRAWING IS A CONTROLLED DOCUMENT. 1-776228-4 GOLD BLUE A & 1-776228-1 SHOWN SIZE ASSEMBLY, HEADER, 23 POSITION, VERTICAL, AMPSEAL WITH FLANGE SEAL CAGE CODE A1 00779 DRAWING NO 776228 SCALE 4:1 SHEET 1 OF RESTRICTED TO - 2 REV D 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 1 20 REVISIONS ALL RIGHTS RESERVED. BY - P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - 47.4 1.5 47.4 4X 2 4X 9.7 AMPSEAL HEADER 10 3.3 3.0 23X n 1.75 # 0.1 AFTER PLATING D D 10.8 18.1 4 18.1 25.2 24.8 4 4 2 5 MOUNTING PANEL OR MODULE 50.4 4X R 6.6 -6.8 RECOMMENDED P.C. BOARD LAYOUT FOR 1.57 THICK P.C. BOARD 44.5 44.0 ( 2.95 ) SCALE 50.4 C MOUNTING SCREW (4) TORQUE TO 0.6N-m TO 0.8N-m 2:1 C RECOMMENDED MOUNTING HOLE LAYOUT FOR 5.0 MAX THICK PANEL KEY FEATURE KEY FEATURE SCALE 2:1 ENSURE THE HEADER IS FLUSH TO THE PANEL FACE ALL AROUND BEFORE TIGHTENING TO FINAL TORQUE B B 5 MAX SEALING SURFACE KEYING FOR 776228-2 AND 776228-4 SCALE 2:1 KEYING FOR 776228-1 AND 776228-5 SCALE 2:1 5 MAX 45 $ 4.7 SEALING SURFACE 4.7 Ra MAX 0.4 Ra MAX 0.4 2 1 2 SECTION A-A SECTION A-A OPTIONAL CONSTRUCTION IF PANEL THICKNESS IS GREATER THAN 2.0 OPTIONAL CONSTRUCTION IF PANEL THICKNESS IS GREATER THAN 2.0 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: 776228-2 & 1-776228-2 KEY LOCATION SCALE 2:1 776228-4 & 1-776228-4 KEY LOCATION SCALE 2:1 776228-5 & 1-776228-5 KEY LOCATION SCALE 2:1 mm MATERIAL TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.2 - DWN 05MAR2010 CHK 22MAR2010 APVD 27APR2010 D. STRAUSSER D.STRAUSSER D. STRAUSSER NAME PRODUCT SPEC 108-1329 APPLICATION SPEC - 114-16016 WEIGHT 22.68g CUSTOMER DRAWING 4805 (3/13) TE Connectivity SIZE ASSEMBLY, HEADER, 23 POSITION, VERTICAL, AMPSEAL WITH FLANGE SEAL CAGE CODE A1 00779 DRAWING NO 776228 SCALE 2:1 SHEET 2 OF RESTRICTED TO - 2 REV D