798941N002

Boots 202D211 to 299 Straight, Lipped Boot As Supplied (a) P JO U Tan J Dia. H Dia. H Dia. HW After Unrestricted Recovery (b) P JO U JW Tan J Dia. H Dia. H Dia. J Dia. 202D211 to 299 HW open-wire-bundle airborne Applications harnesses, or applications Use with circular connecwhere the long tail replaces tors and the appropriate Raychem backshell adapter cable jacketing removed during termination. to provide connector/cable to 299 strain relief. Boot is202D211 used on Materials Available Material* -3 -4 -12 -25 -100 Material Description Semirigid polyolefin Flexible polyolefin Viton® Fluid-resistant elastomer Polyolefin, Zerohal Precoating No. /42 or /86 /42 or /86 N/A /42 or /86 or /225 /86 or /180 Adhesive Part No.** S-1017 or S-1048 S-1017 or S-1048 S-1255-04 S-1017 or S-1048 or S-1125 S-1048 or S-1030 *For more information, please see the appropriate material page in this section. **For more information, please see section 5. Product Dimensions J H Min. Part No. 202D211 202D221 202D232 202D242 202D253 202D263 202D274 202D285 202D296 202D299 Min. a Max. b 22.4 [.88] 25.7 [1.01] 29.5 [1.16] 34.0 [1.34] 37.3 [1.47] 43.7 [1.72] 50.0 [1.97] 62.7 [2.47] 69.3 [2.73] 81.8 [3.22] 11.4 [.45] 15.0 [.59] 18.8 [.74] 22.9 [.90] 29.5 [1.16] 34.0 [1.34] 41.2 [1.62] 47.0 [1.85] 59.7 [2.35] 67.1 [2.64] -3, -4, -25 a 22.4 [.88] 25.7 [1.01] 29.5 [1.16] 34.0 [1.34] 37.3 [1.47] 43.7 [1.72] 50.0 [1.97] 62.7 [2.47] 69.3 [2.73] 81.8 [3.22] -12, -100 a Max. b P ±10% b JO ±10% b 14.0 [.55] 16.0 [.63] 18.3 [.72] 21.3 [.84] 23.1 [.91] 27.2 [1.07] 31.5 [1.24] 39.1 [1.54] 43.2 [1.70] 51.1 [2.01] 6.4 [.25] 7.4 [.29] 8.4 [.33] 9.7 [.38] 10.4 [.41] 12.2 [.48] 14.2 [.56] 17.5 [.69] 19.6 [.77] 22.9 [.90] 105.9 [4.17] 121.2 [4.77] 138.7 [5.46] 159.5 [6.28] 177.8 [7.00] 203.2 [8.00] 203.2 [8.00] 203.2 [8.00] 203.2 [8.00] 203.2 [8.00] 86.4 [3.40] 98.6 [3.88] 112.8 [4.44] 130.8 [5.15] 142.2 [5.60] 163.1 [6.42] 157.7 [6.21] 153.2 [6.03] 143.3 [5.64] 138.4 [5.45] U ±10% b HW ±20% b 14.2 [.56] 15.0 [.59] 15.5 [.61] 15.7 [.62] 18.0 [.71] 19.8 [.78] 20.8 [.82] 23.4 [.92] 23.6 [.93] 31.2 [1.23] 1.52 [.06] 1.52 [.06] 1.78 [.07] 1.78 [.07] 2.0 [.08] 2.0 [.08] 2.3 [.09] 2.5 [.10] 2.5 [.10] 2.5 [.10] JW ±20% b 1.14 [.045] 1.14 [.045] 1.14 [.045] 1.14 [.045] 1.14 [.045] 1.14 [.045] 1.40 [.055] 1.40 [.055] 1.40 [.055] 1.40 [.055] Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max. VITON is a trademark of DuPont Performance Elastomers Available in: Americas Europe Asia Pacific n n n 4-56 Catalog 1654025 Revised 12-04 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Japan: 81-44-900-5102 Singapore: 65-4866-151 UK: 44-1793-528171