8-2151019-5

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 PART NUMBER RELEASED FOR PUBLICATION REVISION 4 3 2 LOC DESCRIPTION FEED TYPE 2151019 -1 K FINE CRIMP HEIGHT ADJUST MECHANICAL 5- 2151019 -1 K STRIPPER SEAL TERMINATING UNIT MECHANICAL 5- 2151019 -2 K STRIPPER SEAL TERMINATING UNIT PNEUMATIC 7-2151019-1 K 7-2151019-2 K 7- 2151019 -7 E K 5 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 2151019 -2 D 6 FINE CRIMP HEIGHT ADJUST PNEUMATIC AND CRIMP TOOLING KIT PNEUMATIC CRIMP TOOLING KIT - - - WIRE INSUL SIZE 1.78 mm [.070] 3 TYPE 2.54 mm [.100] APPLICATOR INSTRUCTIONS 408-35042 3 WIRE STRIP LENGTH 3.96-4.75 mm [.156-.187 IN] C TERMINAL APPLICATION SPECIFICATION n (C)114-1012 (C) 61116-1 (C) 61116-2 (C) 61116-3 (C) 61116-4 (C) 61116-5 (C) 61116-6 (C) 61116-7 (C) 61116-8 (C) 61116-9 (C) 1-61116-3 WIRE SIZE 18 AWG 20 AWG 22 AWG 24 AWG (C) 61314-2 C1__DWG_PN_1_2 (C) 61314-3 (C) 61314-4 C1__DWG_PN_1_3 C1__DWG_PN_1_4 (C) 61314-5 C1__DWG_PN_1_5 (C) 61314-6 (C) 61314-7 C1__DWG_PN_1_6 C1__DWG_PN_1_7 (C) 61314-8 C1__DWG_PN_1_8 (C) 61527-2 (C) 170147-1 C1__DWG_PN_1_9 C1__DWG_PN_1_10 (C) 170147-2 C1__DWG_PN_1_11 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 - TE CRIMP SPECIFICATION - INSULATION DIAMETER RANGE - - 1.02-2.54 mm [.040-.100 IN] - - - - - - TE TERMINAL (C) 61314-1 C1__DWG_PN_1_1 - (B)114-1011 (A)114-1010 C1__DWG_PN_1_0 - - TERMINALS APPLIED TE TERMINAL (C) 61115-1 - PIN/SOCKET, MATE-N-LOK TERMINAL NAME: - F F TE TERMINAL TERMINAL DATA: C1__DWG_PN_2_0 C1__DWG_PN_2_1 C1__DWG_PN_2_2 C1__DWG_PN_2_3 C1__DWG_PN_2_4 C1__DWG_PN_2_5 C1__DWG_PN_2_6 C1__DWG_PN_2_7 C1__DWG_PN_2_8 C1__DWG_PN_2_9 C1__DWG_PN_2_10 C1__DWG_PN_2_11 TE TERMINAL (B) 350560-1 (B) 350561-1 (B) 350561-2 (B) 350561-3 (B) 350561-5 (B) 350561-7 (B) 350561-8 (A) 350570-1 (A) 350570-2 (A) 350570-3 (A) 350570-6 1.22+/-0.05 [.048+/-.002] 1.09+/-0.05 [.043+/-.002] 1.02+/-0.05 [.040+/-.002] 0.96+/-0.05 [.038+/-.002] C1__DWG_PN_3_0 C1__DWG_PN_3_1 C1__DWG_PN_3_2 C1__DWG_PN_3_3 C1__DWG_PN_3_4 C1__DWG_PN_3_5 C1__DWG_PN_3_6 C1__DWG_PN_3_7 C1__DWG_PN_3_8 C1__DWG_PN_3_9 C1__DWG_PN_3_10 TE TERMINAL (A) 350570-7 (A) 350699-1 (A) 350699-2 (A) 350699-3 (A) 350699-5 (A) 350699-7 (A) 350699-8 (A) 350851-1 (A) 350851-2 (A) 350851-7 - C1__DWG_PN_4_0 - C1__DWG_PN_4_1 - C1__DWG_PN_4_2 - C1__DWG_PN_4_3 - C1__DWG_PN_4_4 - C1__DWG_PN_4_5 C1__DWG_PN_4_6 - C1__DWG_PN_4_7 - C1__DWG_PN_4_8 - C1__DWG_PN_4_9 - C1__DWG_PN_4_10 - C1__DWG_PN_3_11 - CRIMP HEIGHT 4 REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 6.1 7.7 8.4 8.8 - W1__FA_SETTING_1 - W1__FA_SETTING_2 - W1__FA_SETTING_3 - W1__FA_SETTING_4 - B 1 2 3 4 - RECOMMENDED SPARE PARTS - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION & STORAGE OF APPLICATOR. - APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEM 180. APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. - 5. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 1 *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING. REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 1 1 1 - A 1 1 1 1 - 2 1 1 1 1 1 1 1 - REF 1 1 1 1 1 1 1 2 2 1 1 1 4 2 1 1 1 1 1 1 1 1 2 2 1 2 1 1 1 1 1 2 1 1 1 1 1 1 2 1 1 1 2 1 2 2 1 1 1 1 1 1 - REF 1 1 1 1 1 1 1 2 2 1 1 1 4 2 1 1 1 2 1 1 1 1 1 1 2 2 1 2 1 1 1 1 1 2 1 1 1 1 1 1 2 1 1 1 2 1 2 1 1 1 - LTR DESCRIPTION DATE DWN APVD H ECR-17-006129 27APR2017 TB GB J ECR-18-003867 13MAR2018 LG JD K ECR-21-006763 07JUL2021 JWC TE K1 ECR-21-007009 22JUL2021 JWC TE 1 2 - 2 1 1 1 1 1 ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - 1 1 PART NO 1 1 TOLERANCES UNLESS OTHERWISE SPECIFIED: RAM ASSEMBLY, SF ATLANTIC APPLICATOR BASIC ASSEMBLY, SF SCR, SKT HD CAP, RoHS, M3 X 8.0 FRONT STRIP GUIDE FEED CAM, AIR FEED CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE STRIPPER, SIDE FEED NUT, HEX, REG, RoHS, M3.5 STANDOFF,HOLD-DOWN PIN, SLOTTED SPRING 3.0 X 20.0 SPRING, COMPRESSION GUIDE PIN,HOLDDOWN GUIDE PIN,HOLDDOWN COUNTER, MAGNETIC WASHER, FLAT, REG M4 SCREW, LOCKING POST, LOCKING SPACER, CRIMPER DOCUMENTATION PACKAGE DEPRESSOR, WIRE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SET, FLT PNT, M5 X 20.0 SCR, SKT HD CAP, RoHS, M4 X 8.0 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP, RoHS, M4 X 10 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF ATLANTIC SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPRING, COMPRESSION LEVER, DRAG RELEASE DRAG, TERMINAL STRIP GUIDE SCR, SKT HD SHLDR 5.0 DIA X 6.0 SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION .070 SPACER DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION F PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM DWN 24AUG2011 CHK 24AUG2011 APVD 24AUG2011 L.ZHANG L.ZHANG S.XI - WEIGHT NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 2 2168083-1 1 1-690438-0 1 2119641-1 1 2119082-4 1 2079764_APP 1 2119083 1 7-18023-7 1 2119580-1 1 2844940-1 1 4-1722335-3 1 1-5018030-0 1 1-1752354-9 1 993111-1 1 SIMP_5-22280-0 1 1752353-3 1 1901680-2 1 COUNTER_994970 1 1-18028-2 1 2844908 1 2844907 1 455888-4 1 1803607_3 1 2119791-6 1 2119740-1 2 2168078-1 2 2-18032-5 1 2168083-2 1 5-18022-5 1 1338685-1 4 2168083-3 2 1-2168083-0 1 5018030-1 1 811242-5_OLD 1 690753-2 3 18023-9 1 2119652 1 2119653 1 1803583-9 1 1803515-1 1 1803602-1 1 1752356-3 2 2079383-5 2 2-2844962-8 1 2844992-3 2 22283-1 1 356835-1 1 240792-5 1 1320928-2 1 980371-4 1 2168083-2 1 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-3 1 1338692-1 1 3-240641-8 1 2119757-8 1 2-238011-2 1 1-2119582-0 1 455888-6 1 1-456404-8 293 292 271 270 248 244 243 242 241 239 238 182 181 180 177 176 175 174 164 119 99 98 82 71 70 67 66 61 60 59 56 54 53 52 51 50 49 48 47 46 44 41 34 33 30 29 27 26 25 24 23 21 20 19 13 12 11 10 9 8 7 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 - 1 2-1803583-1 TE Connectivity APPLICATION SPEC - 1 1803515-3 DESCRIPTION PRODUCT SPEC - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH -1 1 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 - 1 1 1 1 - 1 1 - 1 1 1 1 - 1 1 1 1 2 1 1 1 1 2 1 1 2 1 2 1 2 2 1 2 1 2 2 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 - 1 1 - - - 2 - 1 - 1 1 1 - 1 1 2 - 1 1 1 1 2 1 1 1 4 2 1 1 1 4 2 1 1 1 4 2 1 1 1 4 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - REF REF 1 1 - - REF 1 - - 1 REF - - 1 1 - - 1 1 - - 1 1 - - 1 1 - - 1 1 1 1 1 1 1 - - 1 1 1 1 1 1 1 1 - 1 1 1 1 - 1 1 1 1 1 1 1 2 1 - 1 - 2 1 1803515-3 2-1803583-1 2168083-1 1-690438-0 2119641-1 2119082-4 2079764-1 2119083-1 7-18023-7 2119580-1 2844940-1 4-1722335-3 1-5018030-0 1-1752354-9 993111-1 5-22280-0 1752353-3 1901680-2 994970-2 1-18028-2 2844908-1 2844907-1 455888-4 1803607-3 2119791-6 2119740-1 2168078-1 2-18032-5 2168083-2 5-18022-5 1338685-1 2168083-3 1-2168083-0 5018030-1 811242-5 690753-2 18023-9 2119652-1 2119653-1 1803583-9 1803515-1 1803602-1 1752356-3 2079383-5 2-2844962-8 2844992-3 22283-1 356835-1 240792-5 1320928-2 980371-4 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-3 1338692-1 3-240641-8 2119757-8 2-238011-2 1-2119582-0 455888-6 1-456404-8 - -77 -72 -71 -52 -51 -2 AMP 4805 REV 31MAR2000 P MECHANICAL - CRIMP 66 PNEUMATIC MECHANICAL AND CRIMP TOOLING KIT APPLICATOR DATA REVISIONS DIST A ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER 1 Ocean Side Feed Applicator - DRAWING NO 2151019 SCALE 1:2 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV K1 D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - FEED TYPE MECHANICAL A D 239 D 59 56 44 293 2 PNEUMATIC 244 243 A 238 242 53 50 7 82 1 52 51 3 1 4 2 176 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 2 70 5 44 293 41 3 164 33 44.61 0.05 175 18.0 66 180 2 B 180 A RAM 19 271 21 9 1 ITEM 30 LOCATED AT FRONT HOLES 12 241 CAM POSITIONS 13 30mm STROKE 47 27 61 25 26 23 46 292 98 99 34 54 8 1 60 54 10 1 119 30 REF 29 REF 1 11 248 48 & HOLD DOWN SET-UP B 29 30mm STROKE REF 20 270 30mm STROKE 0.5 67 24 30 REF 174 182 DETAIL A 34 REF TERMINAL SUPPORT LOCATION 181 2 REF 0.5 C 177 56 6.0 1 2 SEE DETAIL A 3 8 59 C 2 FEED TRACK POSITION GUIDE BY INSULATION BARREL A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 40mm STROKE MECHANICAL POST FEED AMP 4805 REV 31MAR2000 49 40mm STROKE MECHANICAL PRE FEED 49 40mm STROKE AIR FEED DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH 24AUG2011 CHK 24AUG2011 APVD 24AUG2011 L.ZHANG L.ZHANG S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2151019 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV K1 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 REVISION DESCRIPTION FEED TYPE 2- 2151019 -1 K FINE CRIMP HEIGHT ADJUST MECHANICAL 7- 2151019 -7 E CRIMP TOOLING KIT - K 3 2 LOC PART NUMBER 2- 2151019 -2 4 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 5 FINE CRIMP HEIGHT ADJUST REVISIONS DIST A PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - PNEUMATIC D D CRIMP WIRE INSUL APPLICATOR DATA SIZE 1.78 mm [.070] 2.54 mm [.100] APPLICATOR INSTRUCTIONS 408-35042 TYPE F F - 2 - 1 - TE TERMINAL TERMINAL DATA: PIN/SOCKET, MATE-N-LOK TERMINAL NAME: WIRE STRIP LENGTH 3.96-4.75 mm [.156-.187 IN] C TERMINAL APPLICATION SPECIFICATION n (C)114-1012 (B)114-1011 - - - (A)114-1010 TE TERMINAL (C) 61115-1 (C) 61116-1 (C) 61116-2 (C) 61116-3 (C) 61116-4 (C) 61116-5 (C) 61116-6 (C) 61116-7 (C) 61116-8 (C) 61116-9 (C) 1-61116-3 WIRE SIZE 18 AWG 20 AWG 22 AWG 24 AWG (C) 61314-1 (C) 61314-2 C1__DWG_PN_1_1 C1__DWG_PN_1_2 (C) 61314-3 C1__DWG_PN_1_3 (C) 61314-4 (C) 61314-5 C1__DWG_PN_1_4 C1__DWG_PN_1_5 (C) 61314-6 C1__DWG_PN_1_6 (C) 61314-7 (C) 61314-8 C1__DWG_PN_1_7 C1__DWG_PN_1_8 (C) 61527-2 (C) 170147-1 C1__DWG_PN_1_9 C1__DWG_PN_1_10 (C) 170147-2 C1__DWG_PN_1_11 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 C1__DWG_PN_2_0 C1__DWG_PN_2_1 C1__DWG_PN_2_2 C1__DWG_PN_2_3 C1__DWG_PN_2_4 C1__DWG_PN_2_5 C1__DWG_PN_2_6 C1__DWG_PN_2_7 C1__DWG_PN_2_8 C1__DWG_PN_2_9 C1__DWG_PN_2_10 C1__DWG_PN_2_11 TE TERMINAL C1__DWG_PN_3_0 - 1 - (B) 350560-1 (B) 350561-1 (B) 350561-2 (B) 350561-3 (B) 350561-5 (B) 350561-7 (B) 350561-8 (A) 350570-1 (A) 350570-2 (A) 350570-3 (A) 350570-6 1.22+/-0.05 [.048+/-.002] 1.09+/-0.05 [.043+/-.002] 1.02+/-0.05 [.040+/-.002] 0.96+/-0.05 [.038+/-.002] C1__DWG_PN_3_1 C1__DWG_PN_3_2 C1__DWG_PN_3_3 C1__DWG_PN_3_4 C1__DWG_PN_3_5 C1__DWG_PN_3_6 C1__DWG_PN_3_7 C1__DWG_PN_3_8 C1__DWG_PN_3_9 C1__DWG_PN_3_10 TE TERMINAL (A) 350570-7 (A) 350699-1 (A) 350699-2 (A) 350699-3 (A) 350699-5 (A) 350699-7 (A) 350699-8 (A) 350851-1 (A) 350851-2 (A) 350851-7 W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 6.1 7.7 8.4 8.8 - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING. REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 1 1 1 1 1 1 1 1 1 - 1 1 - A 1 1 - 1 1 1 1 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 5. ULESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 100-35000. 2 1 - 1 1 2 - - 2 1 - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 2 2 - 4 1 2 - - 1 1 - APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 1 1 - 3 2 - - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION & STORAGE OF APPLICATOR. 1 1 - 2 1 1 - RECOMMENDED SPARE PARTS 1 1 - 1 2 1 - B 1 2 - W1__FA_SETTING_4 1 1 - W1__FA_SETTING_3 2 1 - W1__FA_SETTING_2 2 2 - W1__FA_SETTING_1 1 2 - CRIMP HEIGHT 4 REFERENCE SETTING 1 1 - C1__DWG_PN_3_11 1 1 - C1__DWG_PN_4_10 1 1 - C1__DWG_PN_4_9 1 1 - C1__DWG_PN_4_8 1 1 - C1__DWG_PN_4_7 1 1 - C1__DWG_PN_4_6 1 1 - C1__DWG_PN_4_5 1 1 - C1__DWG_PN_4_4 1 1 - C1__DWG_PN_4_3 4 - - C1__DWG_PN_4_2 1 4 - C1__DWG_PN_4_1 - 1 - C1__DWG_PN_4_0 - REF REF TE TERMINAL C1__DWG_PN_1_0 1 1 - TERMINALS APPLIED 1 - - 1.02-2.54 mm [.040-.100 IN] 1 1 - INSULATION DIAMETER RANGE 1 1 - TE CRIMP SPECIFICATION 1 1 - 3 1 1 - 1 1 1 1 - 1 1 1 1 1 PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 AMP 4805 REV 31MAR2000 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH DWN 24AUG2011 CHK 24AUG2011 APVD 24AUG2011 L.ZHANG L.ZHANG S.XI - WEIGHT NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 1 2119082-4 1 2079764_APP 1 2119083 1 7-18023-7 1 2119580-1 1 2844940-1 1 COUNTER_994970 1 2119641-2 1 2168083-8 4 2168083-9 1 2119653-2 1 1-1803583-0 1 1803516-1 1 1-18028-2 1 2844908 1 2844907 1 455888-4 1 1803607_3 1 2119791-6 1 2119740-1 2 2168078-1 2 2-18032-5 1 5-18022-5 1 1338685-1 2 1-2168083-0 1 5018030-1 1 811242-5_OLD 1 690753-2 3 18023-9 1 2119652 1 1803602-1 1 1752356-3 2 2079383-5 2 2-2844962-8 1 2844992-3 2 22283-1 1 356835-1 1 240792-5 1 1320928-2 1 980371-4 1 2168083-2 1 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-3 1 1338692-1 1 3-240641-8 1 2119757-8 1 2-238011-2 1 1-2119582-0 1 455888-6 1 1-456404-8 271 270 244 243 242 241 239 238 164 151 144 143 142 141 140 119 99 98 82 71 70 67 66 61 59 56 53 52 51 50 49 48 41 34 33 30 29 27 26 25 24 23 21 20 19 13 12 11 10 9 8 7 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 - 1 1-690438-0 TE Connectivity APPLICATION SPEC - 2 2168083-1 DESCRIPTION PRODUCT SPEC - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES SCR, SKT HD CAP, RoHS, M3 X 8.0 FRONT STRIP GUIDE CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE COUNTER, MAGNETIC FEED CAM, AIR FEED SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP, RoHS, M4 X 20 FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF PACIFIC WASHER, FLAT, REG M4 SCREW, LOCKING POST, LOCKING SPACER, CRIMPER DOCUMENTATION PACKAGE DEPRESSOR, WIRE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SET, FLT PNT, M5 X 20.0 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 10 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPRING, COMPRESSION LEVER, DRAG RELEASE DRAG, TERMINAL STRIP GUIDE SCR, SKT HD SHLDR 5.0 DIA X 6.0 SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION .070 SPACER DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION F PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM PART NO -77 -22 -21 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: 2168083-1 1-690438-0 2119082-4 2079764-1 2119083-1 7-18023-7 2119580-1 2844940-1 994970-2 2119641-2 2168083-8 2168083-9 2119653-2 1-1803583-0 1803516-1 1-18028-2 2844908-1 2844907-1 455888-4 1803607-3 2119791-6 2119740-1 2168078-1 2-18032-5 5-18022-5 1338685-1 1-2168083-0 5018030-1 811242-5 690753-2 18023-9 2119652-1 1803602-1 1752356-3 2079383-5 2-2844962-8 2844992-3 22283-1 356835-1 240792-5 1320928-2 980371-4 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-3 1338692-1 3-240641-8 2119757-8 2-238011-2 1-2119582-0 455888-6 1-456404-8 2 Ocean Side Feed Applicator - DRAWING NO 2151019 SCALE 1:2 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV K1 C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 20 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - FEED TYPE MECHANICAL A D 239 140 59 2 244 56 PNEUMATIC D 243 242 2 3 6.0 238 53 A 34 7 82 C 1 52 56 TERMINAL SUPPORT LOCATION 1 C 2 51 3 1 4 70 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 5 140 41 35.58 164 DETAIL A 66 2 33 67 RAM SET-UP A 30 B 271 19 20 B 21 270 9 29 1 12 ITEM 30 LOCATED AT FRONT HOLES 241 CAM POSITIONS 13 30 REF 29 1 REF 30mm STROKE 30mm STROKE 142 REF 0.05 24 30mm STROKE REF 50 59 SEE DETAIL A REF 8 0.5 151 27 48 61 25 26 23 141 98 99 34 143 8 1 144 143 10 1 119 11 FEED TRACK POSITION GUIDE BY INSULATION BARREL A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION 49 MECHANICAL POST FEED 49 MECHANICAL PRE FEED 49 AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH 24AUG2011 CHK 24AUG2011 APVD 24AUG2011 L.ZHANG L.ZHANG S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2151019 SCALE 1:2 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV K1