8-2151182-5

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 PART NUMBER RELEASED FOR PUBLICATION REVISION G 5- 2151182 -2 G 7-2151182-2 G 7- 2151182 -7 A 5 4 3 2 20 LOC ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 2151182-2 6 DESCRIPTION FEED TYPE FINE CRIMP HEIGHT ADJUST REVISIONS DIST A ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR PNEUMATIC SEAL STRIPPER CRIMPER TERMINATING UNIT DESCRIPTION DATE DWN APVD E ECR-18-012726 10AUG2018 MZ CT F ECR-19-005669 09APR2019 JAH CT F1 ECR-19-014169 10SEP2019 FJ TE G ECR-21-124947 26JAN2022 MEH TE PNEUMATIC PNEUMATIC AND CRIMP TOOLING KIT PNEUMATIC CRIMP TOOLING KIT - D D CRIMP WIRE INSUL APPLICATOR DATA SIZE TYPE - F F 2.29 mm [.090] 3.30 mm [.130] APPLICATOR INSTRUCTIONS 408-35042 1 - 1 - TE TERMINAL POSITIVE LOCK RECEPTACLE TERMINAL NAME: WIRE STRIP LENGTH 5.46-6.22 mm [.215-.245 IN] C TERMINAL APPLICATION SPECIFICATION 160759-2 160759-3 n 114-2153 - TERMINALS APPLIED TE TERMINAL 160759-1 TE CRIMP SPECIFICATION 5 C1__DWG_PN_1_1 1-160759-1 C1__DWG_PN_1_2 1-160759-2 C1__DWG_PN_1_3 3 2.30-3.30 mm [.091-.130 IN] - - - - 6 C1__DWG_PN_2_0 C1__DWG_PN_2_1 TE TERMINAL 1-160759-9 C1__DWG_PN_2_2 C1__DWG_PN_2_3 C1__DWG_PN_3_0 C1__DWG_PN_3_1 2-160759-9 TE TERMINAL 3-160759-1 C1__DWG_PN_3_2 3-160759-0 C1__DWG_PN_3_3 3-160759-4 2-160759-1 WIRE SIZE 1.50mm2 0.70mm2 0.60mm2 0.50mm2 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 1.65+/-0.05 [.065+/-.002] 1.60+/-0.05 [.063+/-.002] 1.50+/-0.05 [.059+/-.002] 1.45+/-0.05 [.057+/-.002] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 4.9 5.2 6.3 7.0 4 1 2 B 3 4 RECOMMENDED SPARE PARTS REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 5 TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. 6 TERMINAL LUBRICANT IS RECOMMENDED. 7. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 1 - 1 1 1 A 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 2 - 1 - 1 - 1 - 1 - 2 - 1 1 1 - 1 1 1 - 1 1 1 - 2 1 1 - 1 2 1 - 2 1 2 - 2 2 1 - 2 2 2 - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 1 2 2 - APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 1 1 2 - 1 1 1 - 1 1 1 - 1 - 1 - 2 1 1 - 4 2 1 - 1 4 2 - 1 1 4 - 1 1 1 - W1__FA_SETTING_4 2 1 1 - W1__FA_SETTING_3 1 2 1 - W1__FA_SETTING_2 1 1 2 - W1__FA_SETTING_1 1 1 1 - 2 1 1 - 1 2 1 - 1 1 2 - C1__DWG_PN_4_3 1 1 1 - C1__DWG_PN_4_2 1 1 1 - C1__DWG_PN_4_1 1 1 - C1__DWG_PN_4_0 1 REF REF 1 - 1 1 REF - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 6 TE TERMINAL 160759-4 C1__DWG_PN_1_0 INSULATION DIAMETER RANGE - 1 1 - 1 1 1 - 2 1 - - 1 2 1 1-1803945-3 4-22278-3 4-18032-3 1803944-1 2-1803583-1 2119791-6 2119641-1 2119082-9 2079764-1 2119083-1 7-18023-7 2844940-2 994970-2 2119955-1 2844908-1 2844907-1 455888-4 2168083-1 693855-8 1803607-3 2119740-1 2168078-1 2168083-2 5-18022-5 1338685-1 2168083-3 2168083-8 18023-9 1803583-9 1803515-1 1803602-1 1-1752356-3 2079383-5 2-18032-5 3-2844962-0 2844992-3 22283-1 356835-1 240792-1 1320928-2 980371-4 2168083-2 1-18028-2 2119533-1 318563-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-6 1333205-2 2-240641-4 2119757-8 1-238011-7 1-1633961-5 455888-8 1-456406-1 1 1 2 - TERMINAL DATA: 1 1 1 1 1 1 2 1 1 1 -77 -72 -52 -2 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 AMP 4805 REV 31MAR2000 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: PART NO DWN 17AUG2011 CHK 17AUG2011 APVD 17AUG2011 Y.YIN G.BAILEY S.XI - WEIGHT NAME SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 3 2 4-18032-3 1 1803944-1 1 2-1803583-1 1 2119791-6 1 2119641-1 1 2119082-9 1 2079764_APP 1 2119083 1 7-18023-7 1 2844940-2 1 COUNTER_994970 1 2119955-1 1 2844908 1 2844907 1 455888-4 2 2168083-1 1 693855-8 1 1803607_3 1 2119740-1 2 2168078-1 1 2168083-2 1 5-18022-5 1 1338685-1 4 2168083-3 2 2168083-8 1 18023-9 1 1803583-9 1 1803515-1 1 1803602-1 1 1-1752356-3 2 2079383-5 2 2-18032-5 2 3-2844962-0 1 2844992-3 2 22283-1 1 356835-1 1 240792-1 1 1320928-2 1 980371-4 1 2168083-2 1 1-18028-2 1 2119533 1 318563-1 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-6 1 1333205-2 1 2-240641-4 1 2119757-8 1 1-238011-7 1 1-1633961-5 1 455888-8 1 1-456406-1 300 299 298 297 292 286 248 244 243 242 241 238 164 113 99 98 82 73 72 71 67 66 60 59 56 54 53 49 46 44 41 34 33 31 30 29 27 26 25 24 23 21 20 19 14 13 12 11 10 9 8 7 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 - 1 4-22278-3 TE Connectivity APPLICATION SPEC - 1 1-1803945-3 DESCRIPTION PRODUCT SPEC 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH TONKER SPRING, COMPRESSION SCR, SET, FLT PNT, M3 X 6.0 SPACER, TONKER APPLICATOR BASIC ASSEMBLY, SF DEPRESSOR, WIRE FEED CAM, AIR FEED CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 AIR FEED MODULE COUNTER, MAGNETIC ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER SCR, SKT HD CAP, RoHS, M3 X 8.0 FRONT STRIP GUIDE DOCUMENTATION PACKAGE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SKT HD CAP, RoHS, M4 X 8.0 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP M4 X 6.0 APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF ATLANTIC SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SCR, SET, FLT PNT, M5 X 20.0 SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPRING, COMPRESSION LEVER, DRAG RELEASE DRAG, TERMINAL STRIP GUIDE SCR, SKT HD SHLDR 5.0 DIA X 6.0 SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED GUARD, FRONT CHIP INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION SPACER DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION F PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM Ocean Side Feed Applicator - DRAWING NO 2151182 SCALE 1:2 RESTRICTED TO SHEET 1 OF 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV G C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN - - APVD - FEED TYPE D D 44 PNEUMATIC 2 244 243 A 53 238 242 3 2 297 8 7 59 82 1 298 C SEE DETAIL A 6.0 0.5 34 REF 1 C 2 299 56 REF 3 1 300 4 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) TERMINAL SUPPORT LOCATION 286 5 41 44 44.40 REF 0.05 66 DETAIL A 164 33 67 2 24 A 73 RAM SET-UP 19 30 B 9 20 72 12 21 29 B 1 241 27 13 25 1 ITEM 30 LOCATED AT FRONT HOLES CAM POSITION 30mm STROKE 30 REF 29 REF 113 6 31 26 23 46 292 98 99 34 54 8 1 60 54 10 1 14 11 FEED TRACK POSITION GUIDE BY INSULATION BARREL 248 A A 49 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 40mm STROKE AIR FEED AMP 4805 REV 31MAR2000 DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 17AUG2011 CHK 17AUG2011 APVD 17AUG2011 Y.YIN G.BAILEY S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH DWN - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2151182 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION 4 REV G 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 4 3 2 20 LOC ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 5 PART NUMBER REVISION DESCRIPTION FEED TYPE 2- 2151182 -2 G FINE CRIMP HEIGHT ADJUST PNEUMATIC 7- 2151182 -7 A CRIMP TOOLING KIT - REVISIONS DIST A PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - D D CRIMP WIRE INSUL APPLICATOR DATA SIZE TYPE F F 2.29 mm [.090] 3.30 mm [.130] APPLICATOR INSTRUCTIONS 408-35042 - 1 - 2 - TE TERMINAL TERMINAL DATA: POSITIVE LOCK RECEPTACLE TERMINAL NAME: WIRE STRIP LENGTH 5.46-6.22 mm [.215-.245 IN] C TERMINAL APPLICATION SPECIFICATION 160759-1 160759-2 160759-3 WIRE SIZE 1.50mm2 0.70mm2 0.60mm2 0.50mm2 114-2153 - TERMINALS APPLIED TE TERMINAL n 5 160759-4 1-160759-1 C1__DWG_PN_1_1 C1__DWG_PN_1_2 1-160759-2 C1__DWG_PN_1_3 - W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 1 - 1 - 1 - REF - 1 - 1 C1__DWG_PN_2_0 TE TERMINAL C1__DWG_PN_2_1 C1__DWG_PN_2_2 C1__DWG_PN_2_3 1-160759-9 2-160759-9 3-160759-0 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 1 - 3 6 TE TERMINAL C1__DWG_PN_1_0 - 1 - 2.30-3.30 mm [.091-.130 IN] - 1 - INSULATION DIAMETER RANGE - 1 - TE CRIMP SPECIFICATION 1.65+/-0.05 [.065+/-.002] 1.60+/-0.05 [.063+/-.002] 1.50+/-0.05 [.059+/-.002] 1.45+/-0.05 [.057+/-.002] C1__DWG_PN_3_0 C1__DWG_PN_3_1 C1__DWG_PN_3_2 C1__DWG_PN_3_3 TE TERMINAL 3-160759-1 3-160759-4 CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 4.9 5.2 6.3 7.0 1 - C1__DWG_PN_4_1 1 - 6 C1__DWG_PN_4_2 2-160759-1 4 - C1__DWG_PN_4_0 1 - C1__DWG_PN_4_3 1 - 1 - 4 1 - 2 - 1 - W1__FA_SETTING_1 1 - W1__FA_SETTING_2 1 - W1__FA_SETTING_3 W1__FA_SETTING_4 2 - 1 - 1 - 2 - 1 - 1 - 1 - 2 - 2 B 1 2 APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 4 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 5 6 7. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 2 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. TERMINAL LUBRICANT IS RECOMMENDED. 1 - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 3 2 - RECOMMENDED SPARE PARTS *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 - 1 1 - 1 1 - 1 1 1 1 - 1 1 1 - 1 - 1 1 1 1 1 1 1 - A 1-1803945-3 4-22278-3 4-18032-3 1803944-1 2119791-6 2119082-9 2079764-1 2119083-1 7-18023-7 2844940-2 994970-2 2119641-2 2168083-8 2168083-9 1-1803583-0 1803516-1 2119955-1 2844908-1 2844907-1 455888-4 2168083-1 693855-8 1803607-3 2119740-1 2168078-1 5-18022-5 1338685-1 2168083-8 18023-9 1803602-1 1-1752356-3 2079383-5 2-18032-5 3-2844962-0 2844992-3 22283-1 356835-1 240792-1 1320928-2 980371-4 2168083-2 1-18028-2 2119533-1 318563-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-6 1333205-2 2-240641-4 2119757-8 1-238011-7 1-1633961-5 455888-8 1-456406-1 1 1 1 PART NO -77 -22 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 AMP 4805 REV 31MAR2000 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: DWN 17AUG2011 CHK 17AUG2011 APVD 17AUG2011 Y.YIN G.BAILEY S.XI - WEIGHT NAME SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 1 2 4-18032-3 1 1803944-1 1 2119791-6 1 2119082-9 1 2079764_APP 1 2119083 1 7-18023-7 1 2844940-2 1 COUNTER_994970 1 2119641-2 1 2168083-8 4 2168083-9 1 1-1803583-0 1 1803516-1 1 2119955-1 1 2844908 1 2844907 1 455888-4 2 2168083-1 1 693855-8 1 1803607_3 1 2119740-1 2 2168078-1 1 5-18022-5 1 1338685-1 2 2168083-8 2 18023-9 1 1803602-1 1 1-1752356-3 2 2079383-5 2 2-18032-5 2 3-2844962-0 1 2844992-3 2 22283-1 1 356835-1 1 240792-1 1 1320928-2 1 980371-4 1 2168083-2 1 1-18028-2 1 2119533 1 318563-1 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-6 1 1333205-2 1 2-240641-4 1 2119757-8 1 1-238011-7 1 1-1633961-5 1 455888-8 1 1-456406-1 300 299 298 297 286 244 243 242 241 238 164 151 144 143 141 140 113 99 98 82 73 72 71 67 66 59 56 53 49 41 34 33 31 30 29 27 26 25 24 23 21 20 19 14 13 12 11 10 9 8 7 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 - 1 4-22278-3 TE Connectivity APPLICATION SPEC - 1 1-1803945-3 DESCRIPTION PRODUCT SPEC 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH TONKER SPRING, COMPRESSION SCR, SET, FLT PNT, M3 X 6.0 SPACER, TONKER DEPRESSOR, WIRE CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 AIR FEED MODULE COUNTER, MAGNETIC FEED CAM, AIR FEED SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP, RoHS, M4 X 20 APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF PACIFIC ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER SCR, SKT HD CAP, RoHS, M3 X 8.0 FRONT STRIP GUIDE DOCUMENTATION PACKAGE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP M4 X 6.0 SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SCR, SET, FLT PNT, M5 X 20.0 SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPRING, COMPRESSION LEVER, DRAG RELEASE DRAG, TERMINAL STRIP GUIDE SCR, SKT HD SHLDR 5.0 DIA X 6.0 SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED GUARD, FRONT CHIP INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION SPACER DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION F PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM Ocean Side Feed Applicator - DRAWING NO 2151182 SCALE 1:2 RESTRICTED TO SHEET 3 OF 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV G C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN - - APVD - FEED TYPE D 140 D 2 244 PNEUMATIC 243 242 A 3 2 53 238 297 REF 8 7 59 82 1 298 C SEE DETAIL A 34 REF C 1 2 3 300 1 4 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 286 5 41 140 REF 35.37 164 DETAIL A 0.5 TERMINAL SUPPORT LOCATION 299 56 6.0 0.05 66 33 2 67 24 30 B 9 A 72 1 19 RAM SET-UP 12 20 B 241 73 21 13 29 1 27 ITEM 30 LOCATED AT FRONT HOLES 25 CAM POSITION 30 REF 31 REF 29 30mm STROKE 113 151 A 6 26 23 141 98 99 34 143 8 1 144 143 10 1 14 FEED TRACK POSITION GUIDE BY INSULATION BARREL 11 A 49 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 18AUG2011 CHK 18AUG2011 APVD 18AUG2011 Y.YIN G.BAILEY S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH DWN - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2151182 SCALE 1:2 RESTRICTED TO SHEET 4 OF 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV G