8-2151376-5

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 PART NUMBER RELEASED FOR PUBLICATION REVISION DESCRIPTION FINE CRIMP HEIGHT ADJUST MECHANICAL 5-2151376-1 H SEAL STRIPPER CRIMPER TERMINATING UNIT MECHANICAL 5-2151376-2 H 7-2151376-1 H 7-2151376-2 H 7- 2151376 -7 A CRIMP WIRE INSUL FINE CRIMP HEIGHT ADJUST 2 A - F O - WIRE STRIP LENGTH 4.70-5.50 mm [.185-.217 IN] C TERMINAL APPLICATION SPECIFICATION 114-16016 - TERMINALS APPLIED TE TERMINAL 770520-1 n C1__DWG_PN_1_1 - - - TERMINAL APPLICATION SPECIFICATION TERMINALS APPLIED C1__DWG_PN_2_0 C1__DWG_PN_2_1 TE TERMINAL 770520-3 C1__DWG_PN_3_0 C1__DWG_PN_3_1 n 4.70-5.50 mm [.185-.217 IN] 1.70-2.70 mm [.067-.106 IN] 5 TE TERMINAL 770520-2 C1__DWG_PN_1_0 WIRE STRIP LENGTH TE TERMINAL 770520-4 C1__DWG_PN_4_0 C1__DWG_PN_4_1 TE TERMINAL 770520-1 6 - - - C1__DWG_PN_1_1 3 - 5 TE TERMINAL 770520-2 C1__DWG_PN_1_0 - 1.70-2.70 mm [.067-.106 IN] - - INSULATION DIAMETER RANGE - - TE CRIMP SPECIFICATION CONTACT AMPSEAL TERMINAL NAME: INSULATION DIAMETER RANGE - TE TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION CONTACT AMPSEAL TERMINAL NAME: C1__DWG_PN_2_0 C1__DWG_PN_2_1 TE TERMINAL 770520-3 C1__DWG_PN_3_0 C1__DWG_PN_3_1 TE TERMINAL 770520-4 5 C1__DWG_PN_4_0 C1__DWG_PN_4_1 - - WIRE SIZE 1.50mm2 16 AWG OR 1.40mm2 1.00mm2 18 AWG OR 0.80mm2 20 AWG OR 0.50mm2 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 W1__DWG_WGAUGE_5 1.40+/-0.05 [.055+/-.002] 1.40+/-0.05 [.055+/-.002] 1.28+/-0.05 [.050+/-.002] 1.27+/-0.05 [.050+/-.002] 1.17+/-0.08 [.046+/-.003] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 W1__DWG_CRIMP_HT_5 WIRE SIZE 4 5.0 5.0 6.3 6.5 0.75mm2 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 1.27+/-0.05 [.050+/-.002] - 4 CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 6.5 - W1__FA_SETTING_1 - W1__FA_SETTING_1 - W1__FA_SETTING_2 - W1__FA_SETTING_3 - W1__FA_SETTING_4 - 7.5 - 1 2 B 3 4 - RECOMMENDED SPARE PARTS - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 5 TERMINAL LUBRICANT IS RECOMMENDED. 6 THIS CRIMP PARAMETER IS PROVIDED TO MEET A CUSTOM AND UNIQUE CUSTOMER IT HAS BEEN EVALUATED AND IS CONDITIONALLY SPECIFIED BY TE CONNECTIVITY. CUSTOMIZED CRIMP PARAMETER IS NOT LISTED AS AN APPROVED APPLICATION WITHIN CONNECTIVITY APPLICATION SPECIFICATION; HOWEVER, IT HAS BEEN VALIDATED TE CONNECTIVITY SPECIFICATIONS 109-18079(TEST GROUP 1) AND 114-18022. - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEM 180. - REQUIREMENT. THIS A TE ACCORDING TO 1 TE CONNECTIVITY EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES THAT THE PRODUCT PERFORM WILL SIMILARLY TO VALIDATED AND APPROVED APPLICATIONS, AS STATED WITHIN CONNECTIVITY TE APPLICATION SPECIFICATIONS, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR AS SUCH, IT IS HIGHLY RECOMMENDED THAT THE CUSTOMER FITNESS FOR PARTICULAR PURPOSE. PERFORM FURTHER DETAILED EVALUATION TO ASSESS PRODUCT PERFORMANCE IN THE APPLICATION. 1 1 SPECIFIC 1 7. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 1 - A 1 1 1 1 - 1 1 1 1 1 1 - REF 1 1 1 1 1 1 2 1 1 1 4 2 1 1 1 1 1 1 2 2 1 1 1 1 2 1 1 1 1 1 1 2 1 1 1 2 1 2 1 1 1 1 1 - REF 1 1 1 1 1 1 2 1 1 1 4 2 1 2 1 1 1 1 1 1 2 2 1 1 1 1 2 1 1 1 1 1 1 2 1 1 1 2 1 2 1 1 1 - DATE DWN APVD E ECR-18-005571 12APR2018 MEH JDG F ECR-18-013478 23AUG2018 JAH TE G ECR-20-013472 22SEP2020 JAH RK H ECR-20-018175 29DEC2020 TB TE 1 1 - - 1 1 ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - PART NO - - - REF REF REF REF 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 - 1 1 1 1 - 1 1 - 1 1 1 1 - 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 - 1 1 - - - 2 - 1 - 1 1 1 - 2 1 2 - 4 2 1 1 1 4 2 1 1 1 4 2 1 1 1 4 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: -1 - - 1 1 - - 1 1 - - 1 1 - - 1 1 - - 1 1 - - 1 1 1 1 1 1 1 - - 1 1 1 1 1 1 1 1 - 1 1 1 1 - 1 1 1 - 1 1 1803515-3 2-1803583-1 2119641-1 2119082-9 2079764-1 2119083-1 7-18023-7 2119580-1 2844940-1 4-1722335-3 1-5018030-0 1-1752354-9 993111-1 5-22280-0 1752353-3 1901680-2 994970-2 2119955-1 2844908-1 2844907-1 455888-4 1803607-3 2119740-1 2168078-1 2168083-2 5-18022-5 1338685-1 2168083-3 2168083-3 1803382-6 18023-9 2119652-1 2119653-1 1803583-9 1803515-1 1803602-1 2-1752356-0 2079383-5 2-2844962-6 2844992-1 1-455888-0 1320928-6 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-6 3-1333204-2 240641-5 2119757-4 238011-4 1633965-2 455888-5 1-456405-3 - -77 -72 -71 -52 -51 -2 AMP 4805 REV 31MAR2000 DESCRIPTION D TYPE TE TERMINAL LTR - 3 TERMINAL DATA: P PNEUMATIC CRIMP TOOLING KIT APPLICATOR INSTRUCTIONS 408-35042 66 MECHANICAL PNEUMATIC AND CRIMP TOOLING KIT 3.05 mm [.120] REVISIONS DIST PNEUMATIC MECHANICAL AND CRIMP TOOLING KIT 2.03 mm [.080] 1 PNEUMATIC SEAL STRIPPER CRIMPER TERMINATING UNIT SIZE 3 ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER FEED TYPE H APPLICATOR DATA 4 LOC 2151376 -1 H 5 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 2151376 -2 D 6 TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - RAM ASSEMBLY, SF ATLANTIC APPLICATOR BASIC ASSEMBLY, SF FEED CAM, AIR FEED CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE STRIPPER, SIDE FEED NUT, HEX, REG, RoHS, M3.5 STANDOFF,HOLD-DOWN PIN, SLOTTED SPRING 3.0 X 20.0 SPRING, COMPRESSION GUIDE PIN,HOLDDOWN GUIDE PIN,HOLDDOWN COUNTER, MAGNETIC ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER DOCUMENTATION PACKAGE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SKT HD CAP, RoHS, M4 X 8.0 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP, RoHS, M4 X 12.0 HOLD DOWN, SPRING LOADED SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF ATLANTIC SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION SPACER DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM DWN 21NOV2011 CHK 21NOV2011 APVD 21NOV2011 Y.YIN G.BAILEY S.XI NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 1 2119082-9 1 2079764 1 2119083 1 7-18023-7 1 2119580-1 1 2844940-1 1 4-1722335-3 1 1-5018030-0 1 1-1752354-9 1 993111-1 1 SIMP_5-22280-0 1 1752353-3 1 1901680-2 1 COUNTER_994970 1 2119955-1 1 2844908 1 2844907 1 455888-4 1 1803607_3 1 2119740-1 2 2168078-1 1 2168083-2 1 5-18022-5 1 1338685-1 4 2168083-3 2 2168083-3 1 1803382-6 3 18023-9 1 2119652 1 2119653 1 1803583-9 1 1803515-1 1 1803602-1 1 2-1752356-0 2 2079383-5 2 2-2844962-6 1 2844992-1 1 1-455888-0 1 1320928-6 1 2168083-2 2 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-6 1 3-1333204-2 1 240641-5 .. 1 ITEM_6 1 2119757-4 1 238011-4 1 1633965-2 1 455888-5 1 1-456405-3 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2119641-1 293 292 248 244 243 242 241 239 238 182 181 180 177 176 175 174 164 113 99 98 82 71 67 66 60 59 56 54 53 50 49 48 47 46 44 41 34 33 30 29 28 24 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2-1803583-1 DESCRIPTION PRODUCT SPEC - 1 1803515-3 Ocean Side Feed Applicator - DRAWING NO 2151376 SCALE 1:2 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV H C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - FEED TYPE MECHANICAL A D 239 D 59 56 44 PNEUMATIC 2 293 244 243 A 238 242 53 50 2.0 82 1 34 REF 1 C 2 SEE DETAIL A 3 177 56 1 4 176 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 0.5 REF 8 7 59 C 2 TERMINAL SUPPORT LOCATION 28 5 41 174 181 44.61 175 182 DETAIL A 164 33 66 2 180 19.0 180 REF 19 30 RAM AND HOLDDOWN SET-UP 20 9 21 29 12 13 ITEM 30 LOCATED AT FRONT HOLES 1 30 REF 29 REF CAM POSITIONS 30mm STROKE 30mm STROKE 47 113 5 46 292 98 99 34 54 8 1 60 54 10 1 20 11 248 48 B 1 241 30mm STROKE 0.5 67 A 24 B 3 44 293 REF 0.05 FEED TRACK POSITION GUIDE BY INSULATION BARREL A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 40mm STROKE MECHANICAL POST FEED AMP 4805 REV 31MAR2000 49 40mm STROKE MECHANICAL PRE FEED 49 40mm STROKE AIR FEED DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 21NOV2011 CHK 21NOV2011 APVD 21NOV2011 Y.YIN G.BAILEY S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2151376 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV H 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 REVISION DESCRIPTION FEED TYPE 2- 2151376 -1 H FINE CRIMP HEIGHT ADJUST MECHANICAL 7- 2151376 -7 A CRIMP TOOLING KIT - H 3 2 LOC PART NUMBER 2- 2151376 -2 4 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 5 FINE CRIMP HEIGHT ADJUST REVISIONS DIST A PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - PNEUMATIC D D CRIMP WIRE INSUL APPLICATOR DATA SIZE TYPE F O 2.03 mm [.080] 3.05 mm [.120] APPLICATOR INSTRUCTIONS 408-35042 TE TERMINAL TERMINAL DATA: CONTACT AMPSEAL TERMINAL NAME: WIRE STRIP LENGTH 4.70-5.50 mm [.185-.217 IN] C TERMINAL APPLICATION SPECIFICATION 770520-1 n 114-16016 - TERMINALS APPLIED TE TERMINAL TE CRIMP SPECIFICATION 770520-2 C1__DWG_PN_1_1 - - - C1__DWG_PN_2_0 TE TERMINAL C1__DWG_PN_2_1 770520-3 C1__DWG_PN_3_0 TERMINAL APPLICATION SPECIFICATION 6 - TERMINALS APPLIED TE TERMINAL TE TERMINAL C1__DWG_PN_4_0 770520-4 C1__DWG_PN_3_1 n 4.70-5.50 mm [.185-.217 IN] 5 TE TERMINAL C1__DWG_PN_1_0 WIRE STRIP LENGTH 1.70-2.70 mm [.067-.106 IN] 770520-1 C1__DWG_PN_4_1 TE CRIMP SPECIFICATION CONTACT AMPSEAL TERMINAL NAME: INSULATION DIAMETER RANGE - TE TERMINAL TERMINAL DATA: 1.70-2.70 mm [.067-.106 IN] - TE TERMINAL C1__DWG_PN_2_1 770520-3 C1__DWG_PN_3_0 - C1__DWG_PN_3_1 770520-4 1 1.50mm2 16 AWG OR 1.40mm2 1.00mm2 18 AWG OR 0.80mm2 20 AWG OR 0.50mm2 W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 W1__DWG_WGAUGE_5 1.40+/-0.05 [.055+/-.002] 1.40+/-0.05 [.055+/-.002] 1.28+/-0.05 [.050+/-.002] 1.27+/-0.05 [.050+/-.002] 1.17+/-0.08 [.046+/-.003] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 W1__DWG_CRIMP_HT_5 4 5.0 5.0 6.3 6.5 W1__FA_SETTING_1 W1__FA_SETTING_2 WIRE SIZE 0.75mm2 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 1.27+/-0.05 [.050+/-.002] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 6.5 - B 3 4 5 6 THIS CRIMP PARAMETER IS PROVIDED TO MEET A CUSTOM AND UNIQUE CUSTOMER IT HAS BEEN EVALUATED AND IS CONDITIONALLY SPECIFIED BY TE CONNECTIVITY. CUSTOMIZED CRIMP PARAMETER IS NOT LISTED AS AN APPROVED APPLICATION WITHIN CONNECTIVITY APPLICATION SPECIFICATION; HOWEVER, IT HAS BEEN VALIDATED TE CONNECTIVITY SPECIFICATIONS 109-18079(TEST GROUP 1) AND 114-18022. PERFORM FURTHER DETAILED EVALUATION TO ASSESS PRODUCT PERFORMANCE IN THE APPLICATION. 1 1 1 1 - 1 1 - 1 1 1 1 1 - 1 1 - 1 - - - 1 - 1 1 1 1 - A 1 1 - 1 2 1 - 1 1 2 - 1 1 1 - 1 1 1 - 1 1 1 - 7. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 2 1 - 1 2 2 - 1 1 2 - SPECIFIC 1 1 - 1 1 1 - TE CONNECTIVITY EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES THAT THE PRODUCT PERFORM WILL SIMILARLY TO VALIDATED AND APPROVED APPLICATIONS, AS STATED WITHIN CONNECTIVITY TE APPLICATION SPECIFICATIONS, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR AS SUCH, IT IS HIGHLY RECOMMENDED THAT THE CUSTOMER FITNESS FOR PARTICULAR PURPOSE. 2 - - REQUIREMENT. THIS A TE ACCORDING TO 1 1 - TERMINAL LUBRICANT IS RECOMMENDED. 2 1 - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 2 - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 1 1 - APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 2 1 - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 1 2 - 2 1 1 - RECOMMENDED SPARE PARTS 1 1 - 1 1 1 - 7.5 1 1 - W1__FA_SETTING_4 1 1 - W1__FA_SETTING_3 1 1 - W1__FA_SETTING_1 1 1 - 5 1 1 4 4 - - CRIMP HEIGHT mm [INCH] 1 4 - WIRE SIZE - 1 - C1__DWG_PN_4_1 - REF REF - C1__DWG_PN_4_0 1 1 - TE TERMINAL 1 - C1__DWG_PN_2_0 1 1 - - 1 1 - 2119082-9 2079764-1 2119083-1 7-18023-7 2119580-1 2844940-1 994970-2 2119641-2 2168083-8 2168083-9 2119653-2 1-1803583-0 1803516-1 2119955-1 2844908-1 2844907-1 455888-4 1803607-3 2119740-1 2168078-1 5-18022-5 1338685-1 2168083-3 1803382-6 18023-9 2119652-1 1803602-1 2-1752356-0 2079383-5 2-2844962-6 2844992-1 1-455888-0 1320928-6 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-6 3-1333204-2 240641-5 2119757-4 238011-4 1633965-2 455888-5 1-456405-3 1 1 - 3 - 1 - 5 770520-2 C1__DWG_PN_1_1 INSULATION DIAMETER RANGE - TE TERMINAL C1__DWG_PN_1_0 - 1 1 1 1 1 PART NO -77 -22 -21 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 AMP 4805 REV 31MAR2000 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE COUNTER, MAGNETIC FEED CAM, AIR FEED SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP, RoHS, M4 X 20 FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF PACIFIC ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER DOCUMENTATION PACKAGE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 12.0 HOLD DOWN, SPRING LOADED SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION SPACER DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM DWN 01JUN2011 CHK 01JUN2011 APVD 01JUN2011 Y.YIN G.BAILEY S.XI NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 1 7-18023-7 1 2119580-1 1 2844940-1 1 COUNTER_994970 1 2119641-2 1 2168083-8 4 2168083-9 1 2119653-2 1 1-1803583-0 1 1803516-1 1 2119955-1 1 2844908 1 2844907 1 455888-4 1 1803607_3 1 2119740-1 2 2168078-1 1 5-18022-5 1 1338685-1 2 2168083-3 1 1803382-6 3 18023-9 1 2119652 1 1803602-1 1 2-1752356-0 2 2079383-5 2 2-2844962-6 1 2844992-1 1 1-455888-0 1 1320928-6 1 2168083-2 2 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-6 1 3-1333204-2 1 240641-5 .. 1 ITEM_6 1 2119757-4 1 238011-4 1 1633965-2 1 455888-5 1 1-456405-3 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2119083 244 243 242 241 239 238 164 151 144 143 142 141 140 113 99 98 82 71 67 66 59 56 53 50 49 48 41 34 33 30 29 28 24 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2079764 DESCRIPTION PRODUCT SPEC - 1 2119082-9 Ocean Side Feed Applicator - DRAWING NO 2151376 SCALE 1:2 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV H C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 20 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - FEED TYPE MECHANICAL A D 239 140 59 2 244 56 PNEUMATIC D 243 242 2 53 238 A REF 8 50 2.0 7 34 59 82 1 C SEE DETAIL A 0.5 REF TERMINAL SUPPORT LOCATION 1 C 2 56 3 1 4 28 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 5 41 140 35.58 REF 0.05 66 164 DETAIL A 2 67 33 RAM SET-UP A 24 B 19 30 20 9 21 12 29 B 1 241 13 ITEM 30 LOCATED AT FRONT HOLES 1 CAM POSITIONS 30mm STROKE 30 REF 29 30mm STROKE 30mm STROKE 142 REF 151 113 48 5 141 98 99 34 143 8 1 144 143 10 1 20 FEED TRACK POSITION GUIDE BY INSULATION BARREL 11 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION 49 MECHANICAL POST FEED 49 MECHANICAL PRE FEED 49 AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 21NOV2011 CHK 21NOV2011 APVD 21NOV2011 Y.YIN G.BAILEY S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2151376 SCALE 1:2 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV H