8-2151396-5

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 PART NUMBER RELEASED FOR PUBLICATION 6 REVISION DESCRIPTION 2 FINE CRIMP HEIGHT ADJUST MECHANICAL 7-2151396-1 D MECHANICAL AND CRIMP TOOLING KIT MECHANICAL 7-2151396-2 D 7- 2151396 -7 D FINE CRIMP HEIGHT ADJUST 1 REVISIONS DIST A ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER FEED TYPE D D 3 LOC 2151396 -1 2151396 -2 4 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 5 66 P LTR DESCRIPTION DATE DWN APVD B ECR-15-010983 24JUL2015 XZ TE C ECR-19-006306 18APR2019 FJ TE D ECR-21-006244 15JUN2021 FJ TE PNEUMATIC PNEUMATIC AND CRIMP TOOLING KIT PNEUMATIC CRIMP TOOLING KIT - D D APPLICATOR DATA CRIMP SIZE WIRE INSUL TYPE F F 2.34 mm [.092] 4.83 mm [.190] APPLICATOR INSTRUCTIONS 408-35042 - JST TERMINAL TERMINAL DATA: JST CRIMP SPECIFICATION VL CONNECTOR TERMINAL NAME: WIRE STRIP LENGTH n 5.00-5.50 mm [.197-.217 IN] C TERMINAL APPLICATION SPECIFICATION HM-0106 Rev R4 TE TERMINAL 1572905-1 C1__DWG_PN_1_1 - - - C1__DWG_PN_2_0 C1__DWG_PN_2_1 TE TERMINAL 286971-1 C1__DWG_PN_3_0 C1__DWG_PN_3_1 JST TERMINAL SVM-61T-P2.0 - 1.90-3.40 mm [.075-.134 IN] - - - 7 7 JST TERMINAL SVF-61T-P2.0 C1__DWG_PN_1_0 3 INSULATION DIAMETER RANGE - TERMINALS APPLIED - - C1__DWG_PN_4_0 - C1__DWG_PN_4_1 - WIRE SIZE 0.75+1.25 (18+16AWG) 14 AWG OR 2.00mm2 0.5+1.25 (20+16AWG) 0.75+0.75 (18+18AWG) 0.5+0.75 (20+18AWG) 16 AWG OR 1.25mm2 0.5+0.5 (20+20AWG) 18 AWG OR 0.75mm2 20 AWG OR 0.50mm2 W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 W1__DWG_WGAUGE_5 W1__DWG_WGAUGE_6 W1__DWG_WGAUGE_7 W1__DWG_WGAUGE_8 W1__DWG_WGAUGE_9 1.60+/-0.05 [.063+/-.002] 1.60+/-0.05 [.063+/-.002] 1.55+/-0.05 [.061+/-.002] 1.50+/-0.05 [.059+/-.002] 1.45+/-0.05 [.057+/-.002] 1.45+/-0.05 [.057+/-.002] 1.35+/-0.05 [.053+/-.002] 1.25+/-0.05 [.049+/-.002] 1.10+/-0.05 [.043+/-.002] W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 W1__DWG_CRIMP_HT_5 W1__DWG_CRIMP_HT_6 W1__DWG_CRIMP_HT_7 W1__DWG_CRIMP_HT_8 W1__DWG_CRIMP_HT_9 2.5 2.6 3.1 3.6 4.1 4.0 5.1 6.3 7.9 B 1 2 RECOMMENDED SPARE PARTS - W1__FA_SETTING_1 - W1__FA_SETTING_2 - W1__FA_SETTING_3 5 W1__FA_SETTING_4 W1__FA_SETTING_5 APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 4 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. - W1__FA_SETTING_7 - W1__FA_SETTING_8 - W1__FA_SETTING_9 - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 - CUT TO LENGTH AT ASSEMBLY. 1 - 1 - 1 6. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 7 - W1__FA_SETTING_6 REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 3 5 - CRIMP HEIGHT 4 REFERENCE SETTING CRIMP HEIGHT mm [INCH] TERMINAL LUBRICANT IS RECOMMENDED. 1 - 1 1 1 1 A - 1 1 1 1 - 1 1 1 1 1 1 - REF REF REF REF 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 - 1 1 2 1 - 1 1 1 1 - 1 1 1 2 - 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 1 1 - 1 1 2 - 1 1 1 1 1 - 1 1 2 - 1 1 1 1 2 1 1 1 4 2 1 1 1 4 2 1 1 1 4 2 1 1 1 4 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 AMP 4805 REV 31MAR2000 mm & 4 of 4) MATERIAL - PART NO 1 -77 -72 -71 -2 DIMENSIONS: -1 1 - - 1 1 1 1 1 1 1 1 - 1 1 1 1 - 1 1 455888-1 2119641-1 2119082-7 2079764-1 2119083-1 18023-1 2119580-1 2844940-1 994970-2 1-18028-2 2119955-1 2844908-1 2844907-1 455888-1 1803607-3 2119791-9 2119943-1 2119740-1 2168078-1 2168083-2 5-18022-5 1338685-1 2168083-3 2168083-3 5018030-1 811242-5 690753-2 18023-9 2119652-1 2119653-1 1803583-9 1803515-1 1803602-1 1752356-1 2079383-5 2-2844962-8 2844992-1 1-455888-0 1320928-2 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-1 1-1633927-0 2119757-8 1-238011-7 3-1633961-1 455888-4 1-1803087-2 1 TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - SPACER, CRIMPER FEED CAM, AIR FEED CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 5.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE COUNTER, MAGNETIC WASHER, FLAT, REG M4 ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER DOCUMENTATION PACKAGE DEPRESSOR, WIRE WASHER, SPACER TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SKT HD CAP, RoHS, M4 X 8.0 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP, RoHS, M4 X 12.0 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF ATLANTIC SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION F PREMIUM SPACER, CRIMPER CRIMPER, WIRE DWN 21MAR2012 CHK 21MAR2012 APVD 21MAR2012 BOB HIGMAN T.ELBIN M.CLIFFORD NAME SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 3 1 2079764_APP 1 2119083 1 18023-1 1 2119580-1 1 2844940-1 1 COUNTER_994970 1 1-18028-2 1 2119955-1 1 2844908 1 2844907 1 455888-1 1 1803607_3 1 2119791-9 1 2119943-1 1 2119740-1 2 2168078-1 1 2168083-2 1 5-18022-5 1 1338685-1 4 2168083-3 2 2168083-3 1 5018030-1 1 811242-5_OLD 1 690753-2 3 18023-9 1 2119652 1 2119653 1 1803583-9 1 1803515-1 1 1803602-1 1 1752356-1 2 2079383-5 2 2-2844962-8 1 2844992-1 1 1-455888-0 1 1320928-2 1 2168083-2 1 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-1 1 1-1633927-0 .. 1 ITEM_6 1 2119757-8 1 1-238011-7 1 3-1633961-1 1 455888-4 1 1-1803087-2 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2119082-7 263 248 244 243 242 241 239 238 164 119 113 99 98 82 71 70 69 67 66 60 59 56 54 53 52 51 50 49 48 47 46 44 41 34 33 30 29 28 24 21 20 19 13 12 11 10 9 8 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2119641-1 DESCRIPTION PRODUCT SPEC - 1 455888-1 Ocean Side Feed Applicator - DRAWING NO 2151396 SCALE 1:2 RESTRICTED TO SHEET 1 OF 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN - - APVD - FEED TYPE MECHANICAL A D 239 4.8 # 0.1 59 REF 8 34 56 PNEUMATIC 44 REF 2 TERMINAL SUPPORT LOCATION FOR TERMINAL 1572905-1 244 53 A 5 243 50 242 238 2 3 REF 8 9.1 0.5 82 59 C D 1 1 263 70 SEE DETAIL A 34 REF 69 C 2 3 52 56 1 4 51 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) TERMINAL SUPPORT LOCATION 28 FOR TERMINAL 286971-1 5 41 44 44.61 REF 0.05 66 DETAIL A 2 164 33 A 24 B 67 19 30 20 29 21 B 9 1 ITEM 30 LOCATED AT FRONT HOLES 12 241 CAM POSITIONS 13 47 1 11 30mm STROKE 30mm STROKE 30mm STROKE 30 REF 29 REF 119 113 7 46 98 99 34 53 8 1 60 53 10 1 FEED TRACK POSITION GUIDE BY INSULATION BARREL 248 48 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 40mm STROKE MECHANICAL POST FEED AMP 4805 REV 31MAR2000 49 40mm STROKE MECHANICAL PRE FEED 49 40mm STROKE AIR FEED DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 21MAR2012 CHK 21MAR2012 APVD 21MAR2012 BOB HIGMAN T.ELBIN M.CLIFFORD TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2151396 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION 4 REV D 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 REVISION DESCRIPTION FEED TYPE 2- 2151396 -1 D FINE CRIMP HEIGHT ADJUST MECHANICAL 7- 2151396 -7 D CRIMP TOOLING KIT - D 3 2 LOC PART NUMBER 2- 2151396 -2 4 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 5 FINE CRIMP HEIGHT ADJUST REVISIONS DIST A PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - PNEUMATIC D D CRIMP WIRE INSUL APPLICATOR DATA SIZE TYPE F F 2.34 mm [.092] 4.83 mm [.190] APPLICATOR INSTRUCTIONS 408-35042 - 1 - JST TERMINAL TERMINAL DATA: JST CRIMP SPEC VL CONNECTOR TERMINAL NAME: WIRE STRIP LENGTH n 5.00-5.50 mm [.197-.217 IN] C TERMINAL APPLICATION SPECIFICATION HM-0106 Rev R4 - TERMINALS APPLIED TE TERMINAL 1572905-1 SVF-61T-P2.0 C1__DWG_PN_1_1 - - C1__DWG_PN_2_1 TE TERMINAL C1__DWG_PN_3_0 - 286971-1 C1__DWG_PN_3_1 JST TERMINAL SVM-61T-P2.0 WIRE SIZE 0.75+1.25 (18+16AWG) 14 AWG OR 2.00mm2 0.5+1.25 (20+16AWG) 0.75+0.75 (18+18AWG) 0.5+0.75 (20+18AWG) 16 AWG OR 1.25mm2 0.5+0.5 (20+20AWG) 18 AWG OR 0.75mm2 20 AWG OR 0.50mm2 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 W1__DWG_WGAUGE_5 W1__DWG_WGAUGE_6 W1__DWG_WGAUGE_7 W1__DWG_WGAUGE_8 W1__DWG_WGAUGE_9 1.60+/-0.05 [.063+/-.002] 1.60+/-0.05 [.063+/-.002] 1.55+/-0.05 [.061+/-.002] 1.50+/-0.05 [.059+/-.002] 1.45+/-0.05 [.057+/-.002] 1.45+/-0.05 [.057+/-.002] 1.35+/-0.05 [.053+/-.002] 1.25+/-0.05 [.049+/-.002] 1.10+/-0.05 [.043+/-.002] W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 W1__DWG_CRIMP_HT_5 W1__DWG_CRIMP_HT_6 W1__DWG_CRIMP_HT_7 W1__DWG_CRIMP_HT_8 W1__DWG_CRIMP_HT_9 2.5 2.6 3.1 3.6 4.1 4.0 5.1 6.3 7.9 - 5 CUT TO LENGTH AT ASSEMBLY. 6. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 7 1 1 1 1 1 1 1 1 1 1 - 1 1 - 1 1 - 1 1 1 1 1 - 1 - - - 1 - 1 1 1 1 - A 1 1 - 1 1 1 - 1 2 1 - 1 2 2 - 1 1 2 - TERMINAL LUBRICANT IS RECOMMENDED. 1 1 - 1 1 1 - 1 2 - - 1 1 1 - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 1 1 - 4 1 1 - 1 2 1 - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 2 - APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 1 1 - 3 2 1 - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 1 2 - 2 1 1 - RECOMMENDED SPARE PARTS 1 1 - 1 1 1 - B 1 1 - W1__FA_SETTING_9 1 1 - 5 1 1 - W1__FA_SETTING_8 1 1 - W1__FA_SETTING_7 1 1 - W1__FA_SETTING_6 1 1 - W1__FA_SETTING_5 1 1 - W1__FA_SETTING_4 1 1 - W1__FA_SETTING_3 4 - - W1__FA_SETTING_2 1 4 - W1__FA_SETTING_1 - 1 - CRIMP HEIGHT 4 REFERENCE SETTING CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 1 - 7 - REF REF - C1__DWG_PN_4_1 1 1 - C1__DWG_PN_4_0 1 - C1__DWG_PN_2_0 1 1 - 7 JST TERMINAL C1__DWG_PN_1_0 - 1 1 - 1.90-3.40 mm [.075-.134 IN] 1 1 - 3 INSULATION DIAMETER RANGE - 1 - 455888-1 2119082-7 2079764-1 2119083-1 18023-1 2119580-1 2844940-1 994970-2 2119641-2 2168083-8 2168083-9 2119653-2 1-1803583-0 1803516-1 1-18028-2 2119955-1 2844908-1 2844907-1 455888-1 1803607-3 2119791-9 2119943-1 2119740-1 2168078-1 5-18022-5 1338685-1 2168083-3 5018030-1 811242-5 690753-2 18023-9 2119652-1 1803602-1 1752356-1 2079383-5 2-2844962-8 2844992-1 1-455888-0 1320928-2 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-1 1-1633927-0 2119757-8 1-238011-7 3-1633961-1 455888-4 1-1803087-2 1 1 1 1 1 1 PART NO -77 -22 -21 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 AMP 4805 REV 31MAR2000 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - SPACER, CRIMPER CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 5.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE COUNTER, MAGNETIC FEED CAM, AIR FEED SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP, RoHS, M4 X 20 FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF PACIFIC WASHER, FLAT, REG M4 ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER DOCUMENTATION PACKAGE DEPRESSOR, WIRE WASHER, SPACER TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 12.0 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION F PREMIUM SPACER, CRIMPER CRIMPER, WIRE DWN 21MAR2012 CHK 21MAR2012 APVD 21MAR2012 BOB HIGMAN T.ELBIN M.CLIFFORD NAME SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 1 1 2119083 1 18023-1 1 2119580-1 1 2844940-1 1 COUNTER_994970 1 2119641-2 1 2168083-8 4 2168083-9 1 2119653-2 1 1-1803583-0 1 1803516-1 1 1-18028-2 1 2119955-1 1 2844908 1 2844907 1 455888-1 1 1803607_3 1 2119791-9 1 2119943-1 1 2119740-1 2 2168078-1 1 5-18022-5 1 1338685-1 2 2168083-3 1 5018030-1 1 811242-5_OLD 1 690753-2 3 18023-9 1 2119652 1 1803602-1 1 1752356-1 2 2079383-5 2 2-2844962-8 1 2844992-1 1 1-455888-0 1 1320928-2 1 2168083-2 1 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-1 1 1-1633927-0 .. 1 ITEM_6 1 2119757-8 1 1-238011-7 1 3-1633961-1 1 455888-4 1 1-1803087-2 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2079764_APP 263 244 243 242 241 239 238 164 151 144 143 142 141 140 119 113 99 98 82 71 70 69 67 66 59 56 53 52 51 50 49 48 41 34 33 30 29 28 24 21 20 19 13 12 11 10 9 8 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2119082-7 DESCRIPTION PRODUCT SPEC - 1 455888-1 Ocean Side Feed Applicator - DRAWING NO 2151396 SCALE 1:2 RESTRICTED TO SHEET 3 OF 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 20 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN - - APVD - FEED TYPE MECHANICAL A D 140 244 239 243 59 53 56 PNEUMATIC 5 242 50 D 4.8 # 0.1 REF 8 2 34 REF 3 TERMINAL SUPPORT LOCATION FOR TERMINAL 1572905-1 82 A 1 238 1 263 9.1 70 69 52 59 8 2 51 3 1 0.5 REF 34 4 28 REF 5 41 TERMINAL SUPPORT LOCATION FOR TERMINAL 286971-1 C C SEE DETAIL A 56 164 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 2 140 0.05 REF 66 33 A 24 DETAIL A 35.58 67 RAM SET-UP 30 19 29 20 9 21 1 12 241 13 1 B B ITEM 30 LOCATED AT FRONT HOLES CAM POSITIONS 30mm STROKE 113 141 98 99 34 143 8 1 144 143 10 1 119 11 REF REF 29 30mm STROKE 30mm STROKE 142 7 30 151 FEED TRACK POSITION GUIDE BY INSULATION BARREL 48 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION 49 MECHANICAL POST FEED 49 MECHANICAL PRE FEED 49 AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 21MAR2012 CHK 21MAR2012 APVD 21MAR2012 BOB HIGMAN T.ELBIN M.CLIFFORD TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2151396 SCALE 1:2 RESTRICTED TO SHEET 4 OF 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV D