8-2151488-4

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 PART NUMBER 6 DESCRIPTION FEED TYPE 2151488 -1 F FINE CRIMP HEIGHT ADJUST MECHANICAL 7-2151488-1 F MECHANICAL AND CRIMP TOOLING KIT MECHANICAL 7-2151488-2 F 7- 2151488 -7 C 2151488 -2 F 3 2 FINE CRIMP HEIGHT ADJUST P ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER CRIMP TOOLING KIT - - D 3 WIRE INSUL SIZE - - - TYPE - F O 1.07 mm [.042] 1.58 mm [.062] APPLICATOR INSTRUCTIONS 408-35042 - - TE TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION WIRE STRIP LENGTH 3.18-3.96 mm [.125-.156 IN] C TERMINAL APPLICATION SPECIFICATION 1-104480-3 n 114-25038 - TERMINALS APPLIED TE TERMINAL 104480-2 - AMPMODU CRIMP SNAP-IN 22-26 AWG TERMINAL NAME: C1__DWG_PN_1_1 1-104480-7 C1__DWG_PN_1_2 - INSULATION DIAMETER RANGE - 1.52mm MAX [.060 IN MAX] - - - - - - - 7 TE TERMINAL 104480-3 C1__DWG_PN_1_0 C1__DWG_PN_2_0 C1__DWG_PN_2_1 TE TERMINAL 104480-4 C1__DWG_PN_3_0 C1__DWG_PN_3_1 - TE TERMINAL 1-104480-2 - C1__DWG_PN_4_0 - C1__DWG_PN_4_1 - C1__DWG_PN_2_2 - WIRE SIZE 22 AWG 24 AWG 26 AWG 1 2 B W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 0.91+/-0.05 [.036+/-.002] 0.81+/-0.05 [.032+/-.002] 0.76+/-0.05 [.030+/-.002] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 8.0 9.0 9.7 RECOMMENDED SPARE PARTS 6 - W1__FA_SETTING_1 - W1__FA_SETTING_2 - W1__FA_SETTING_3 - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. - APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 5 APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 6 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 7 8. - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 3 4 CRIMP HEIGHT mm [INCH] - 2234095 - TERMINAL LUBRICANT IS RECOMMENDED. 1 - 1 - 1 UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. - 1 - 1 - 1 1 1 - 1 1 1 1 A - 1 1 1 1 DATE DWN APVD D ECR-17-011382 04AUG2017 TB TE E ECR-17-012203 22AUG2017 KH TE F ECR-18-014289 11SEP2018 MS TE F1 ECR-19-006787 28APR2019 MZ YY - 1 1 - 1 1 ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - PART NO 1 2 - REF REF REF REF 1 - 1 1 - 1 1 - 1 1 1 1 2 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 - 1 1 2 - 1 1 2 1 1 - 4 2 2 - 1 4 2 1 1 1 4 2 1 1 1 4 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 4 1 1 1 1 4 1 1 1 1 4 2 1 1 1 1 2 1 1 - 1 2 1 - 1 1 2 - 1 1 2 1 1 THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: -1 - 1 - 1 1 1 1 2 2 - - 1 1 2 1 1 1 1 2 - 1 1 1 2 - 1 1 1 - 1 1 1 - 1 - 2280441-1 2119640-1 1803259-1 2119641-1 2119082-9 2079764-1 2119083-1 7-18023-7 2119580-1 2063440-1 1-356885-4 21045-3 994970-2 240638-1 3-23627-7 2119799-1 1-22281-8 1-18028-2 2844908-1 2844907-1 690438-1 2168083-1 2168083-6 455888-6 240641-2 1803607-1 2119791-9 2119943-1 2119740-1 2168078-1 2-18032-5 2168083-2 5-18022-5 1338683-1 2168083-3 2-2168083-5 18023-9 2119652-1 2119653-1 1803583-9 1803515-1 1803602-1 2305692-1 22283-1 356835-1 240792-1 189124-7 980371-4 2168083-2 1-18028-2 2119533-4 690518-1 690463-1 1-2168083-1 1-690691-3 2119862-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-3 4-1633139-8 1-690468-8 2119757-1 238011-7 1633966-6 455888-5 2-1633730-7 1 -77 -72 -71 -2 4805 (3/13) DESCRIPTION PNEUMATIC - CRIMP LTR PNEUMATIC PNEUMATIC AND CRIMP TOOLING KIT APPLICATOR DATA 1 REVISIONS ALL RIGHTS RESERVED. REVISION 4 2016 RELEASED FOR PUBLICATION BY - 5 TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - INSERT, SHEAR PUSH ROD, AIR FEED BUSHING, FLANGED FEED CAM, AIR FEED CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE STOP, SHEAR RING, RETAIN, EXTERN, 3/16 CRESCENT COUNTER, MAGNETIC SPRING, FEED FINGER PIN, RETAIN, GRVD, 3/16 X .854 HOLDER,FEED FINGER, AF SPRING, COMPRESSION WASHER, FLAT, REG M4 SCREW, LOCKING POST, LOCKING FRONT STRIP GUIDE SCR, SKT HD CAP, RoHS, M3 X 8.0 SCR, SKT HD CAP, RoHS, M5 X 65 SPACER, CRIMPER SPACER DOCUMENTATION PACKAGE DEPRESSOR, WIRE WASHER, SPACER TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SET, FLT PNT, M5 X 20.0 SCR, SKT HD CAP, RoHS, M4 X 8.0 SCR, HEX HD CAP, M4 X 6.0 FEED PAWL SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP, RoHS, M4 X 14 SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF ATLANTIC SCR, BHSC, RoHS (M8 X 25) PLATE, REAR STRIP GUIDE SPRING, COMPRESSION LEVER, DRAG RELEASE DRAG, TERMINAL GUIDE, FRONT STRIP SCR, SKT HD SHLDR 5.0 DIA X 6.0 SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED HOLD DOWN, TERMINAL FLOATING SHEAR, REAR SCR, SKT HD CAP, RoHS, M3 X 6 PLATE,REAR SHEAR SHEAR HOLDER, REAR INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEPRESSOR SHEAR, REAR DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O SPACER, CRIMPER CRIMPER, WIRE DWN 25AUG2011 CHK 25AUG2011 APVD 25AUG2011 C. MOYER T. ELBIN T. ELBIN NAME - WEIGHT SIZE - 1 2119641-1 1 2119082-9 1 2079764 1 2119083 2 7-18023-7 1 2119580-1 1 2063440-1 1 1-356885-4 2 21045-3 1 COUNTER_994970 1 240638 1 3-23627-7 1 2119799 1 SIMP_1-22281-8 2 1-18028-2 1 2844908 1 2844907 1 690438-1 4 2168083-1 1 2168083-6 1 455888-6 1 240641-2 1 1803607-1 1 2119791-9 1 2119943-1 1 2119740-1 2 2168078-1 2 2-18032-5 1 2168083-2 1 5-18022-5 1 1338683-1 4 2168083-3 2 2-2168083-5 3 18023-9 1 2119652 1 2119653 1 1803583-9 1 1803515-1 1 1803602-1 1 2305692-1 2 22283-1 1 356835-1 1 240792-1 1 189124-7 1 980371-4 1 2168083-2 1 1-18028-2 1 2119533-4 1 690518-1 1 690463-1 2 1-2168083-1 1 1-690691-3 1 2119862 1 2119806 2 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-3 1 4-1633139-8 1 1-690468-8 1 2119757-1 1 238011-7 1 1633966-6 1 455888-5 1 2-1633730-7 ITEM NO Ocean Side Feed Applicator - A1 CAGE CODE - CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 3 1 1803259 282 250 249 248 244 243 242 241 239 238 237 172 164 163 137 136 121 119 99 98 96 95 93 82 81 71 70 69 67 66 61 60 59 56 54 53 49 48 47 46 44 41 29 27 26 25 24 23 21 20 19 18 17 16 15 14 13 12 11 10 9 8 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2119640-1 DESCRIPTION PRODUCT SPEC - 1 2280441-1 DRAWING NO RESTRICTED TO 2151488 SCALE 1:2 SHEET 1 OF 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV F1 D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 6 5 4 3 2 1 2016 RELEASED FOR PUBLICATION REVISIONS ALL RIGHTS RESERVED. BY - P LTR - DESCRIPTION DATE SEE SHEET 1 DWN - - APVD - FEED TYPE MECHANICAL A D 239 D 59 56 44 PNEUMATIC 250 2 244 249 53 243 6 A 81 18 238 242 163 82 59 1 1 2 136 3 137 C 2 2 1 3 4 70 172 C 69 5 56 41 44 164 66 2 96 282 119 24 B 23 121 26 241 A 95 0.05 12 67 95 44.61 17 REF 19 237 20 16 21 15 9 1 12 25 1 RAM SET-UP B 14 54 241 13 CAM POSITIONS 30mm STROKE 30mm STROKE 30mm STROKE 47 61 27 29 93 46 98 99 8 1 60 54 10 1 119 1 11 248 48 A A THIS DRAWING IS A CONTROLLED DOCUMENT. 49 40mm STROKE MECHANICAL POST FEED 4805 (3/13) 49 40mm STROKE MECHANICAL PRE FEED 49 40mm STROKE AIR FEED DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 25AUG2011 CHK 25AUG2011 APVD 25AUG2011 C. MOYER T. ELBIN T. ELBIN TE Connectivity NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - Ocean Side Feed Applicator - A1 CAGE CODE - CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 3 DRAWING NO RESTRICTED TO 2151488 SCALE 1:2 SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION 4 REV F1 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 6 PART NUMBER REVISION DESCRIPTION FEED TYPE 2- 2151488 -1 F FINE CRIMP HEIGHT ADJUST MECHANICAL 7- 2151488 -7 C CRIMP TOOLING KIT - F 3 2 FINE CRIMP HEIGHT ADJUST P PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 1 - APPLICATOR INSTRUCTIONS 408-35042 - 1 - WIRE STRIP LENGTH 3.18-3.96 mm [.125-.156 IN] C TERMINAL APPLICATION SPECIFICATION 104480-2 1-104480-3 114-25038 - TERMINALS APPLIED TE TERMINAL n 104480-3 1-104480-7 C1__DWG_PN_1_1 C1__DWG_PN_1_2 - - - TE TERMINAL C1__DWG_PN_2_1 104480-4 C1__DWG_PN_3_0 C1__DWG_PN_3_1 22 AWG 24 AWG 26 AWG W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 0.91+/-0.05 [.036+/-.002] 0.81+/-0.05 [.032+/-.002] 0.76+/-0.05 [.030+/-.002] CRIMP HEIGHT REFERENCE SETTING - W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 8.0 9.0 9.7 2 3 APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 4 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 5 APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 6 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 7 1 1 1 1 1 1 1 1 - 1 1 - 1 1 - 1 1 - 1 1 - 1 2 - 2 1 - 1 1 - 1 1 - 1 2 - 2 1 - 1 1 - 1 1 1 1 1 - 1 1 - 1 1 - 1 1 1 1 1 - 1 1 1 A 2 1 - 1 1 2 - 1 1 1 - 1 1 1 - 1 2 - - 1 2 1 - 8. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 1 2 - TERMINAL LUBRICANT IS RECOMMENDED. 1 1 - 1 2 1 - 1 2 2 - 1 1 2 - 2234095 1 1 - 1 1 1 - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 1 1 - B 1 1 - RECOMMENDED SPARE PARTS 1 1 - 1 1 1 - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 4 1 - W1__FA_SETTING_3 1 4 - W1__FA_SETTING_2 1 1 - W1__FA_SETTING_1 1 1 - 6 2 1 - CRIMP HEIGHT mm [INCH] 1 2 - WIRE SIZE - 1 - C1__DWG_PN_2_2 - 1 - C1__DWG_PN_4_1 1 1 - 1-104480-2 1 1 - TE TERMINAL 1 1 - C1__DWG_PN_4_0 4 - C1__DWG_PN_2_0 1 4 - 6 TE TERMINAL C1__DWG_PN_1_0 - - 1 - 1.52mm MAX [.060 IN MAX] - 1 - INSULATION DIAMETER RANGE - REF REF - AMPMODU CRIMP SNAP-IN 22-26 AWG 1 2 - TERMINAL NAME: - 1 - TE CRIMP SPECIFICATION 1 1 - TE TERMINAL 2 - - TERMINAL DATA: 1 2 - F O 1.58 mm [.062] 1 1 - 1.07 mm [.042] 1 1 - TYPE - 1 - 3 - 1 - WIRE INSUL 1 1 1 DWN APVD - - THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - INSERT, SHEAR PUSH ROD, AIR FEED BUSHING, FLANGED CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE STOP, SHEAR RING, RETAIN, EXTERN, 3/16 CRESCENT COUNTER, MAGNETIC SPRING, FEED FINGER FEED CAM, AIR FEED SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP, RoHS, M4 X 20 FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF PACIFIC PIN, RETAIN, GRVD, 3/16 X .854 HOLDER,FEED FINGER, AF SPRING, COMPRESSION WASHER, FLAT, REG M4 SCREW, LOCKING POST, LOCKING FRONT STRIP GUIDE SCR, SKT HD CAP, RoHS, M3 X 8.0 SCR, SKT HD CAP, RoHS, M5 X 65 SPACER, CRIMPER SPACER DOCUMENTATION PACKAGE DEPRESSOR, WIRE WASHER, SPACER TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SET, FLT PNT, M5 X 20.0 SCR, HEX HD CAP, M4 X 6.0 FEED PAWL SCR, SKT HD CAP, RoHS, M4 X 14 SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED SCR, BHSC, RoHS (M8 X 25) PLATE, REAR STRIP GUIDE SPRING, COMPRESSION LEVER, DRAG RELEASE DRAG, TERMINAL GUIDE, FRONT STRIP SCR, SKT HD SHLDR 5.0 DIA X 6.0 SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED HOLD DOWN, TERMINAL FLOATING SHEAR, REAR SCR, SKT HD CAP, RoHS, M3 X 6 PLATE,REAR SHEAR SHEAR HOLDER, REAR INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEPRESSOR SHEAR, REAR DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O SPACER, CRIMPER CRIMPER, WIRE PART NO -77 -22 -21 4805 (3/13) DATE SEE SHEET 1 2280441-1 2119640-1 1803259-1 2119082-9 2079764-1 2119083-1 7-18023-7 2119580-1 2063440-1 1-356885-4 21045-3 994970-2 240638-1 2119641-2 2168083-8 2168083-9 2119653-2 1-1803583-0 1803516-1 3-23627-7 2119799-1 1-22281-8 1-18028-2 2844908-1 2844907-1 690438-1 2168083-1 2168083-6 455888-6 240641-2 1803607-1 2119791-9 2119943-1 2119740-1 2168078-1 2-18032-5 5-18022-5 1338683-1 2-2168083-5 18023-9 2119652-1 1803602-1 2305692-1 22283-1 356835-1 240792-1 189124-7 980371-4 2168083-2 1-18028-2 2119533-4 690518-1 690463-1 1-2168083-1 1-690691-3 2119862-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-3 4-1633139-8 1-690468-8 2119757-1 238011-7 1633966-6 455888-5 2-1633730-7 1 1 - D SIZE DESCRIPTION - PNEUMATIC - CRIMP LTR - - APPLICATOR DATA 1 REVISIONS ALL RIGHTS RESERVED. 2- 2151488 -2 4 2016 RELEASED FOR PUBLICATION BY - 5 DWN 25AUG2011 CHK 25AUG2011 APVD 25AUG2011 C. MOYER T. ELBIN T. ELBIN NAME - WEIGHT SIZE - 1 2119082-9 1 2079764 1 2119083 2 7-18023-7 1 2119580-1 1 2063440-1 1 1-356885-4 2 21045-3 1 COUNTER_994970 1 240638 1 2119641-2 1 2168083-8 4 2168083-9 1 2119653-2 1 1-1803583-0 1 1803516-1 1 3-23627-7 1 2119799 1 SIMP_1-22281-8 2 1-18028-2 1 2844908 1 2844907 1 690438-1 4 2168083-1 1 2168083-6 1 455888-6 1 240641-2 1 1803607-1 1 2119791-9 1 2119943-1 1 2119740-1 2 2168078-1 2 2-18032-5 1 5-18022-5 1 1338683-1 2 2-2168083-5 3 18023-9 1 2119652 1 1803602-1 1 2305692-1 2 22283-1 1 356835-1 1 240792-1 1 189124-7 1 980371-4 1 2168083-2 1 1-18028-2 1 2119533-4 1 690518-1 1 690463-1 2 1-2168083-1 1 1-690691-3 1 2119862 1 2119806 2 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-3 1 4-1633139-8 1 1-690468-8 1 2119757-1 1 238011-7 1 1633966-6 1 455888-5 1 2-1633730-7 ITEM NO Ocean Side Feed Applicator - A1 CAGE CODE - CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 1 1 1803259 282 250 249 244 243 242 241 239 238 237 172 164 163 151 144 143 142 141 140 137 136 121 119 99 98 96 95 93 82 81 71 70 69 67 66 61 59 56 53 49 48 41 29 27 26 25 24 23 21 20 19 18 17 16 15 14 13 12 11 10 9 8 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2119640-1 DESCRIPTION PRODUCT SPEC - 1 2280441-1 DRAWING NO RESTRICTED TO 2151488 SCALE 1:2 SHEET 3 OF 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV F1 D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 6 5 4 3 2 1 2016 RELEASED FOR PUBLICATION REVISIONS ALL RIGHTS RESERVED. BY - P LTR DESCRIPTION DATE SEE SHEET 1 - DWN - - APVD - FEED TYPE MECHANICAL A D 140 2 D 239 59 244 56 243 PNEUMATIC 250 242 2 249 53 6 238 A 81 18 163 59 136 82 1 137 C 3 2 1 2 172 56 3 C 1 4 70 69 5 41 140 17 66 2 164 282 A 96 B 19 237 20 16 21 RAM SET-UP B 121 9 1 12 14 143 241 CAM POSITIONS 25 13 1 11 30mm STROKE 30mm STROKE 142 1 15 26 30mm STROKE 0.05 119 95 23 35.58 241 67 95 24 12 REF 119 151 61 48 27 29 93 141 98 99 8 1 144 143 10 1 A A THIS DRAWING IS A CONTROLLED DOCUMENT. PACIFIC VERSION 49 MECHANICAL POST FEED 49 MECHANICAL PRE FEED 49 AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL 4805 (3/13) - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 25AUG2011 CHK 25AUG2011 APVD 25AUG2011 C. MOYER T. ELBIN T. ELBIN TE Connectivity NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - Ocean Side Feed Applicator - A1 CAGE CODE - CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 1 DRAWING NO RESTRICTED TO 2151488 SCALE 1:2 SHEET 4 OF 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV F1