8-2151725-4

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION PART NUMBER REVISION D 3 2 FINE CRIMP HEIGHT ADJUST 3- 2151725 -2 U FINE CRIMP HEIGHT ADJUST 7-2151725-1 T MECHANICAL AND CRIMP TOOLING KIT 7-2151725-2 U 7- 2151725 -7 N PNEUMATIC DOUBLE ACTING PNEUMATIC WITH SENSORS CRIMP TOOLING KIT - C 3 TYPE F O APPLICATOR INSTRUCTIONS 408-35042 - WIRE STRIP LENGTH 4.00-4.50 mm [.157-.177 IN] TERMINAL APPLICATION SPECIFICATION TE TERMINAL 1438616-3 1438616-7 TE CRIMP SPECIFICATION 7 7 1456968-3 7 1-1456968-3 7 5 C1__DWG_PN_1_1 5 C1__DWG_PN_1_2 C1__DWG_PN_1_3 C1__DWG_PN_1_4 22 AWG OR 0.35mm2 1642772-1 1642948-1 1924275-3 1924727-1 1924955-3 1-1924955-3 C1__DWG_PN_1_6 C1__DWG_PN_1_7 WIRE SIZE 20 AWG OR 0.50mm2 TE TERMINAL 1-1924727-1 C1__DWG_PN_1_5 1.50-1.85 mm [.059-.073 IN] - - W1__DWG_WGAUGE_2 - - - - - TE TERMINAL C1__DWG_PN_2_0 7 8 8 7 7 7 7 1924968-3 1949674-1 C1__DWG_PN_2_1 C1__DWG_PN_2_2 5 2035124-1 2035170-1 C1__DWG_PN_2_3 C1__DWG_PN_2_4 1-2035170-1 C1__DWG_PN_2_5 2035334-3 C1__DWG_PN_2_6 0.95+/-0.05 [.037+/-.002] 0.90+/-0.05 [.035+/-.002] TE TERMINAL C1__DWG_PN_3_0 8 7 7 7 7 7 2098165-1 2098753-1 C1__DWG_PN_3_1 C1__DWG_PN_3_2 2098762-1 2138699-1 C1__DWG_PN_3_3 C1__DWG_PN_3_4 1-2138699-1 C1__DWG_PN_3_5 2312100-3 2312102-3 C1__DWG_PN_3_6 C1__DWG_PN_2_7 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 9 9 C1__DWG_PN_1_0 1456574-3 7 1-1456574-3 7 1-1456841-3 7 B n 114-13183 - INSULATION DIAMETER RANGE - TERMINALS APPLIED - GENERATION Y, 0.64 STYLE TERMINAL TERMINAL NAME: - TE TERMINAL TERMINAL DATA: CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 7.7 8.3 - C1__DWG_PN_4_0 7 7 7 7 7 7 7 - C1__DWG_PN_4_1 - C1__DWG_PN_4_2 - C1__DWG_PN_4_3 - C1__DWG_PN_4_4 - C1__DWG_PN_4_5 6 C1__DWG_PN_4_6 C1__DWG_PN_4_7 - 4 - W1__FA_SETTING_1 - W1__FA_SETTING_2 1 2 3 4 5 - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION & STORAGE OF APPLICATOR. 1 APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEM 180. APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 6 YAZAKI TERMINAL 7114-4618-02 7116-4618-02 7116-5231-08 THIS APPLICATOR IS EQUIPED WITH THE DOUBLE ACTING PNEUMATIC FEED WITH SENSORS, AND IS APPLICATION SPECIFIC AND DOES NOT REQUIRE ITEMS 49 & 248. 7 A - RECOMMENDED SPARE PARTS TE TERMINAL 1642772-1 1642948-1 1949674-1 USE TERMINAL SUPPORT LOCATION SPECIFIED FOR FEMALE TERMINALS. 8 USE TERMINAL SUPPORT LOCATION SPECIFIED FOR MALE TERMINALS. 9 TERMINAL LUBRICANT IS RECOMMENDED. 10. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. - 1 *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING. REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 1 1 - 1 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 REF 1 1 1 1 1 1 1 1 2 1 1 1 4 1 1 1 1 1 1 1 2 2 1 1 1 1 1 2 1 1 1 1 1 1 2 1 1 2 2 - 1 - - DWN APVD T ECR-18-019241 10DEC2018 TB CT U ECR-19-005748 09APR2019 LG TE U1 ECR-19-010422 03JUL2019 FZ TE U2 ECR-21-006003 03JUN2021 FZ YY - 1 1 1 1 1 REF 1 1 1 REF 1 1 ATLANTIC VERSION mm 1 & 4 of 4) MATERIAL - 1 - 1 - 1 TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH - - PART NO 1 1 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES -1 1 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: 1 - 1 - 2 - - 1 - 1 - 1 2 1 1 1 1 1 1 - 1 1 1 - - 1 1 1 - 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 2 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 1 2 1 1 1 2 2 1 1 1 2 1 - 1 1 2 - 1 1 1 1 1 1 1 1 - 1 4 1 - 1 1 4 - 1 1 1 1 2 1 1 1 1 2 1 4 1 1 2 1 4 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 REF REF 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - 1 1 1 1 1 1 1 1 - - 1 1 1 - - 1 1 1 1 1 1 1 1 - 1 1 2844950-1 2119641-1 2119082-8 2079764-1 2119083-1 7-18023-7 2119580-1 2844940-1 1-1752354-6 993111-1 8-22280-7 1752353-2 1901680-2 994970-2 2119955-1 2844908-1 2844907-1 455888-6 1803607-3 2119791-5 2119943-1 2119740-1 2168078-1 2168083-2 5-18022-5 1338685-1 2168083-3 1-5018030-0 1901681-1 18023-9 2119652-1 2119653-1 1803583-9 1803515-3 1803602-1 1752356-1 2079383-5 2-2844962-6 2844992-4 455888-2 240792-1 1320928-2 2168083-2 1-18028-2 2119533-3 2119806-1 3-22280-3 1-356885-3 2119805-1 1803095-6 1803537-7 2119757-1 238011-4 1-1803019-2 1803364-3 - -77 -72 -71 -32 -2 Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 AMP 4805 REV 31MAR2000 DATE D 3 1.55 mm [.061] DESCRIPTION - - 1.35 mm [.053] LTR PNEUMATIC 6 WIRE INSUL P MECHANICAL PNEUMATIC AND CRIMP TOOLING KIT SIZE 66 6 - CRIMP REVISIONS MECHANICAL FINE CRIMP HEIGHT ADJUST APPLICATOR DATA 1 DIST A ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER FEED TYPE T U 4 LOC DESCRIPTION 2151725 -1 2151725 -2 5 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 20 6 AIR FEED MODULE FEED CAM, AIR FEED CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE STANDOFF,HOLD-DOWN PIN, SLOTTED SPRING 3.0 X 20.0 SPRING, COMPRESSION GUIDE PIN,HOLDDOWN GUIDE PIN,HOLDDOWN COUNTER, MAGNETIC ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER DOCUMENTATION PACKAGE DEPRESSOR, WIRE WASHER, SPACER TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SKT HD CAP, RoHS, M4 X 8.0 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 12.0 NUT, HEX, REG, RoHS, M3.5 HOLDDOWN, TERMINAL SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF ATLANTIC SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER DRAG, TERMINAL STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O CRIMPER, WIRE PREMIUM DWN 31JUL2012 CHK 31JUL2012 APVD 31JUL2012 C. MOYER T. ELBIN T. ELBIN NAME SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 3 1 2079764_APP 1 2119083 1 7-18023-7 1 2119580-1 1 2844940-1 1 1-1752354-6 1 993111-1 1 8-22280-7_SIMP 1 1752353-2 1 1901680-2 1 COUNTER_994970 1 2119955-1 1 2844908 1 2844907 1 455888-6 1 1803607_3 1 2119791-5 1 2119943-1 1 2119740-1 2 2168078-1 1 2168083-2 1 5-18022-5 1 1338685-1 4 2168083-3 1 1-5018030-0 1 1901681-1 3 18023-9 1 2119652 1 2119653 1 1803583-9 1 1803515-3 1 1803602-1 1 1752356-1 2 2079383-5 2 2-2844962-6 1 2844992-4 1 455888-2 1 240792-1 1 1320928-2 1 2168083-2 2 1-18028-2 1 2119533-3 1 2119806 1 SIMP_3-22280-3 1 1-356885-3 1 2119805-1 1 1803095-6 1 1803537-7 .. 1 ITEM_7 .. 1 ITEM_6 1 2119757-1 1 238011-4 1 1-1803019-2 .. 1 ITEM_2 1 1803364-3 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2119082-8 290 248 244 243 242 241 239 238 180 177 176 175 174 164 113 99 98 82 71 70 69 67 66 60 59 56 54 52 51 49 48 47 46 44 41 34 33 30 29 28 25 24 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2119641-1 DESCRIPTION PRODUCT SPEC - 1 2844950-1 Ocean Side Feed Applicator - DRAWING NO 2151725 SCALE 1:2 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV U2 C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. FEED TYPE MECHANICAL 1 REVISIONS DIST 66 P LTR DESCRIPTION SEE SHEET 1 - A DATE DWN APVD - - - 239 59 D D 56 44 PNEUMATIC 2 3.0 # 0.1 244 8 REF 34 REF 243 A 242 2 3 7 238 82 59 C 1 3.8 1 56 SEE DETAIL A 3 1 4 28 70 2 176 2 0.1 REF 8 177 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) TERMINAL SUPPORT LOCATION C 34 69 5 8 41 REF TERMINAL SUPPORT LOCATION 174 52 2 DETAIL A 51 3 DOUBLE ACTING PNEUMATIC WITH SENSORS 175 66 180 2 164 44.61 67 15.6 33 6 290 A 24 A B 19 30 59 20 56 SEE DETAIL A ITEM 30 LOCATED AT FRONT HOLES 241 25 13 30 REF 29 REF 1 11 30mm STROKE 30mm STROKE 47 1 12 CAM POSITIONS 20 113 9 46 98 99 34 54 8 1 60 54 10 1 248 48 B RAM AND HOLDDOWN SET-UP 21 29 0.5 180 REF 9 30mm STROKE REF 44 0.05 FEED TRACK POSITION GUIDE BY INSULATION BARREL A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 40mm STROKE MECHANICAL POST FEED AMP 4805 REV 31MAR2000 49 40mm STROKE MECHANICAL PRE FEED 49 40mm STROKE AIR FEED DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 31JUL2012 CHK 31JUL2012 APVD 31JUL2012 C. MOYER T. ELBIN T. ELBIN TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2151725 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV U2 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION 5 4 3 2 20 LOC ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 20 6 PART NUMBER REVISION DESCRIPTION FEED TYPE 2- 2151725 -1 T FINE CRIMP HEIGHT ADJUST MECHANICAL 2- 2151725 -2 U FINE CRIMP HEIGHT ADJUST PNEUMATIC 4- 2151725 -2 U FINE CRIMP HEIGHT ADJUST 7- 2151725 -7 N CRIMP TOOLING KIT DOUBLE ACTING PNEUMATIC WITH SENSORS - REVISIONS DIST A PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 6 D D - 1 - 1 3 - - CRIMP WIRE INSUL SIZE TYPE F O 1.35 mm [.053] 1.55 mm [.061] APPLICATOR INSTRUCTIONS 408-35042 GENERATION Y, 0.64 STYLE TERMINAL TERMINAL NAME: WIRE STRIP LENGTH 4.00-4.50 mm [.157-.177 IN] TERMINAL APPLICATION SPECIFICATION 1-1456841-3 1456968-3 1-1456968-3 1.50-1.85 mm [.059-.073 IN] - TE TERMINAL 1438616-3 7 1438616-7 7 1456574-3 7 7 7 7 7 5 5 C1__DWG_PN_1_2 C1__DWG_PN_1_3 C1__DWG_PN_1_4 C1__DWG_PN_1_6 22 AWG OR 0.35mm2 1642948-1 1924275-3 1924727-1 1-1924955-3 C1__DWG_PN_1_7 WIRE SIZE 20 AWG OR 0.50mm2 TE TERMINAL 1642772-1 1-1924727-1 1924955-3 C1__DWG_PN_1_5 W1__DWG_WGAUGE_2 - - - 9 TE TERMINAL 1924968-3 C1__DWG_PN_2_0 7 8 8 7 7 7 7 C1__DWG_PN_2_1 C1__DWG_PN_2_2 0.95+/-0.05 [.037+/-.002] 0.90+/-0.05 [.035+/-.002] 8 7 7 1949674-1 5 2035124-1 2035170-1 C1__DWG_PN_2_3 C1__DWG_PN_2_4 7 1-2035170-1 2035334-3 C1__DWG_PN_2_5 C1__DWG_PN_2_6 TE TERMINAL 2098165-1 C1__DWG_PN_3_0 7 7 C1__DWG_PN_3_1 2098753-1 C1__DWG_PN_3_2 2098762-1 2138699-1 C1__DWG_PN_3_3 C1__DWG_PN_3_4 1-2138699-1 2312100-3 C1__DWG_PN_3_5 C1__DWG_PN_3_6 2312102-3 C1__DWG_PN_2_7 CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 7.7 8.3 7 7 7 7 7 7 7 4 6 1 2 3 4 5 RECOMMENDED SPARE PARTS REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION & STORAGE OF APPLICATOR. APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEM 180. APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 1 TE TERMINAL 1642772-1 1642948-1 1949674-1 YAZAKI TERMINAL 7114-4618-02 7116-4618-02 7116-5231-08 7 THIS APPLICATOR IS EQUIPED WITH THE DOUBLE ACTING PNEUMATIC FEED WITH SENSORS, AND IS APPLICATION SPECIFIC AND DOES NOT REQUIRE ITEMS 49 & 151. USE TERMINAL SUPPORT LOCATION SPECIFIED FOR FEMALE TERMINALS. 8 USE TERMINAL SUPPORT LOCATION SPECIFIED FOR MALE TERMINALS. 9 TERMINAL LUBRICANT IS RECOMMENDED. 10. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 1 1 ENTRY LEVEL APPLICATOR PART NUMBER 8-2151725-1 8-2151725-2 9-2151725-1 9-2151725-2 ITEM SUBSTITUTION LIST SAME AS ITEM ITEM DESCRIPTION 2151725-1 1 WIRE CRIMPER 2151725-2 2-2151725-1 2-2151725-2 1 3 46 INSULATION CRIMPER 141 BASIC SUB -ASSEMBLY BASIC SUB -ASSEMBLY LUBRICATOR 1-1803627-2 1803940-9 1-1803940-0 DELETE 1 1 1 - 1 - 1 1 1 1 1 - - 1 1 - 1 - 1 - 1 1 DIMENSIONS: PACIFIC VERSION mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - AIR FEED MODULE CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE STANDOFF,HOLD-DOWN PIN, SLOTTED SPRING 3.0 X 20.0 SPRING, COMPRESSION GUIDE PIN,HOLDDOWN GUIDE PIN,HOLDDOWN COUNTER, MAGNETIC FEED CAM, AIR FEED SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP, RoHS, M4 X 20 FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF PACIFIC ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER DOCUMENTATION PACKAGE DEPRESSOR, WIRE WASHER, SPACER TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED NUT, HEX, REG, RoHS, M3.5 HOLDDOWN, TERMINAL SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER DRAG, TERMINAL STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O CRIMPER, WIRE PREMIUM PART NO -77 -42 -22 -21 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 AMP 4805 REV 31MAR2000 1 1 - - - 1 1 - - 1 1 1 - SUBSTITUTE PART NUMBER 1803669-3 1 1 1 - 1 1 1 1 1 1 1 - 1 1 1 - 2 1 1 - 1 2 1 - 1 1 2 - 1 1 1 - 1 1 1 - 1 1 1 - 2 1 1 - 2 2 1 - 1 2 2 - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 6 A *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING. REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 1 2 - 1 1 1 - 2 - 1 - B 1 1 - - W1__FA_SETTING_2 1 1 - - W1__FA_SETTING_1 1 1 1 - 1 1 1 - 2 1 1 - 1 2 1 - 1 1 2 - C1__DWG_PN_4_7 1 1 1 - C1__DWG_PN_4_6 1 1 1 - C1__DWG_PN_4_5 1 1 1 - C1__DWG_PN_4_4 1 1 1 - C1__DWG_PN_4_3 1 1 1 - C1__DWG_PN_4_2 1 1 1 - C1__DWG_PN_4_1 1 1 1 - C1__DWG_PN_4_0 1 1 1 - 1 1 1 - 4 - 1 - 1 4 - - - 1 4 - CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 - 1 1 - 1 REF REF - - 1 1 REF - 1 1 1 - 9 C1__DWG_PN_1_0 C1__DWG_PN_1_1 6 INSULATION DIAMETER RANGE n 114-13183 TERMINALS APPLIED 1-1456574-3 TE CRIMP SPECIFICATION 1 1 1 - 1 1 1 - - 1 1 - 1 1 1 - 1 - - - 1 1 - - TE TERMINAL TERMINAL DATA: C 3 1 1 1 - 1 1 1 2844950-1 2119082-8 2079764-1 2119083-1 7-18023-7 2119580-1 2844940-1 1-1752354-6 993111-1 8-22280-7 1752353-2 1901680-2 994970-2 2119641-2 2168083-8 2168083-9 2119653-2 1-1803583-0 1803516-1 2119955-1 2844908-1 2844907-1 455888-6 1803607-3 2119791-5 2119943-1 2119740-1 2168078-1 5-18022-5 1338685-1 1-5018030-0 1901681-1 18023-9 2119652-1 1803602-1 1752356-1 2079383-5 2-2844962-6 2844992-4 455888-2 240792-1 1320928-2 2168083-2 1-18028-2 2119533-3 2119806-1 3-22280-3 1-356885-3 2119805-1 1803095-6 1803537-7 2119757-1 238011-4 1-1803019-2 1803364-3 - 1 1 - APPLICATOR DATA - DWN 31JUL2012 CHK 31JUL2012 APVD 31JUL2012 C. MOYER T. ELBIN T. ELBIN NAME SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 1 1 2119083 1 7-18023-7 1 2119580-1 1 2844940-1 1 1-1752354-6 1 993111-1 1 8-22280-7_SIMP 1 1752353-2 1 1901680-2 1 COUNTER_994970 1 2119641-2 1 2168083-8 4 2168083-9 1 2119653-2 1 1-1803583-0 1 1803516-1 1 2119955-1 1 2844908 1 2844907 1 455888-6 1 1803607_3 1 2119791-5 1 2119943-1 1 2119740-1 2 2168078-1 1 5-18022-5 1 1338685-1 1 1-5018030-0 1 1901681-1 3 18023-9 1 2119652 1 1803602-1 1 1752356-1 2 2079383-5 2 2-2844962-6 1 2844992-4 1 455888-2 1 240792-1 1 1320928-2 1 2168083-2 2 1-18028-2 1 2119533-3 1 2119806 1 SIMP_3-22280-3 1 1-356885-3 1 2119805-1 1 1803095-6 1 1803537-7 .. 1 ITEM_7 .. 1 ITEM_6 1 2119757-1 1 238011-4 1 1-1803019-2 .. 1 ITEM_2 1 1803364-3 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2079764_APP 290 244 243 242 241 239 238 180 177 176 175 174 164 151 144 143 142 141 140 113 99 98 82 71 70 69 67 66 59 56 52 51 49 48 41 34 33 30 29 28 25 24 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2119082-8 DESCRIPTION PRODUCT SPEC - 1 2844950-1 Ocean Side Feed Applicator - DRAWING NO 2151725 SCALE 1:2 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV U2 C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 20 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. FEED TYPE 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - MECHANICAL A 239 59 D D 140 2 56 PNEUMATIC 244 3.0 # 0.1 243 242 A REF 8 34 3 2 REF 238 7 TERMINAL SUPPORT LOCATION 59 3.8 8 82 1 SEE DETAIL A C 56 2 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 2 34 3 1 4 28 176 174 8 70 C TERMINAL SUPPORT LOCATION 5 41 175 51 DETAIL A REF 69 52 2 REF 1 177 0.1 35.58 66 3 180 2 164 0.05 140 REF 67 15.6 0.5 33 DOUBLE ACTING PNEUMATIC WITH SENSORS B A 24 6 A 19 180 REF 20 30 9 21 290 29 30mm STROKE 25 56 ITEM 30 LOCATED AT FRONT HOLES 29 1 REF 30 REF 30mm STROKE 30mm STROKE 113 142 1 241 13 CAM POSITIONS RAM AND HOLDDOWN SET-UP 12 59 SEE DETAIL A B 9 141 98 99 34 143 8 1 144 143 10 1 20 11 151 FEED TRACK POSITION GUIDE BY INSULATION BARREL 48 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 49 MECHANICAL POST FEED AMP 4805 REV 31MAR2000 49 MECHANICAL PRE FEED 49 AIR FEED DIMENSIONS: mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 31JUL2012 CHK 31JUL2012 APVD 31JUL2012 C. MOYER T. ELBIN T. ELBIN TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2151725 SCALE 1:2 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV U2