8-2151836-4

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION PART NUMBER REVISION D DESCRIPTION FINE CRIMP HEIGHT ADJUST MECHANICAL 5-2151836-1 H SEAL STRIPPER CRIMPER TERMINATING UNIT MECHANICAL 5-2151836-2 H 7-2151836-1 H 7-2151836-2 H 7- 2151836 -7 F CRIMP WIRE INSUL FINE CRIMP HEIGHT ADJUST A - 1 - 1 - TE TERMINAL TE TERMINAL 1939351-1 n 114-5400 2 - - - TERMINAL APPLICATION SPECIFICATION TE TERMINAL C1__DWG_PN_2_0 C1__DWG_PN_3_0 TE TERMINAL C1__DWG_PN_1_1 - - TE TERMINAL 1939351-1 C1__DWG_PN_4_0 n 6 TERMINALS APPLIED 5 TE TERMINAL C1__DWG_PN_1_0 4.80-5.30 mm [.189-.209 IN] 1.80-2.20 mm [.071-.087 IN] - TE CRIMP SPECIFICATION WIRE STRIP LENGTH 5 C1__DWG_PN_1_1 - C1__DWG_PN_2_1 TE TERMINAL - C1__DWG_PN_3_0 C1__DWG_PN_3_1 1 - 3 1 - 1 - C1__DWG_PN_2_0 1 - 6 TE TERMINAL - C1__DWG_PN_1_0 - 1 - 1.80-2.20 mm [.071-.087 IN] - - - INSULATION DIAMETER RANGE - 1 - RECEPTACLE CONTACT, Sn, SEALED TYPE, 1.0 SERIES TERMINAL NAME: INSULATION DIAMETER RANGE - TE TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION RECEPTACLE CONTACT, Au, SEALED TYPE, 1.0 SERIES TERMINALS APPLIED - 5 TE TERMINAL - 1 1 - C1__DWG_PN_4_0 1 - C1__DWG_PN_4_1 1 1 - 1.25mm2 0.85mm2 0.75mm2 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 1.20+/-0.05 [.047+/-.002] 1.12+/-0.05 [.044+/-.002] 1.09+/-0.05 [.043+/-.002] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 7.7 8.5 8.7 WIRE SIZE 4 6 W1__FA_SETTING_1 1.00mm2 W1__DWG_WGAUGE_1 1.16+/-0.05 [.046+/-.002] 1 - CRIMP HEIGHT mm [INCH] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 8.1 1 - 4 1 - 1 - W1__FA_SETTING_1 2 - W1__FA_SETTING_2 1 - W1__FA_SETTING_3 1 - 1 - 4 - 2 - 1 - - - - 1 B 2 REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 3 APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEMS 242. 4 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 5 6 1 - 1 - 1 - 2 - 2 - 1 - 1 - 1 - TERMINAL LUBRICANT IS RECOMMENDED. 1 - THIS CRIMP PARAMETER IS PROVIDED TO MEET A CUSTOM AND UNIQUE CUSTOMER IT HAS BEEN EVALUATED AND IS CONDITIONALLY SPECIFIED BY TE CONNECTIVITY. CUSTOMIZED CRIMP PARAMETER IS NOT LISTED AS AN APPROVED APPLICATION WITHIN CONNECTIVITY APPLICATION SPECIFICATION; HOWEVER, IT HAS BEEN VALIDATED TE CONNECTIVITY SPECIFICATIONS 109-18079(TEST GROUP 1) AND 114-18022. PERFORM FURTHER DETAILED EVALUATION TO ASSESS PRODUCT PERFORMANCE IN THE APPLICATION. 2 - REQUIREMENT. THIS A TE ACCORDING TO 1 1 - 1 - 1 - TE CONNECTIVITY EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES THAT THE PRODUCT PERFORM WILL SIMILARLY TO VALIDATED AND APPROVED APPLICATIONS, AS STATED WITHIN CONNECTIVITY TE APPLICATION SPECIFICATIONS, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR AS SUCH, IT IS HIGHLY RECOMMENDED THAT THE CUSTOMER FITNESS FOR PARTICULAR PURPOSE. 1 - 1 1 1 SPECIFIC 1 1 - 1 2 - - - - - 7. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 1 - A BARREL FRONT POINT HEIGHT 1.45 BARREL FRONT POINT HEIGHT (FRONT BOTTOM SURFACE BOX TO FRONT BARREL END) AMP 4805 REV 31MAR2000 1 - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. RECOMMENDED SPARE PARTS 1 1 1 1 1 1 2 1 - 1 1 1 1 1 - 1 1 1 1 DATE DWN APVD F ECR-22-125618 04JAN2022 FJ YY F1 ECR-22-134029 28MAR2022 FZ TE G ECR-22-134441 30MAR2022 TB TE H ECR-22-151275 01SEP2022 ROY JAH 1 2 1 2 1 1 1 2 - 1 - 1 2 1 1 1 1 1 1 1 1 2 1 1 1 4 2 2 1 1 1 1 1 1 2 2 1 1 1 1 2 1 1 1 1 1 1 2 1 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - 1 1 1 - - 1 1 1 - - 1 1 1 - - 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 - 1 1 1 1 - 1 1 - 1 1 1 1 - 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 1 1 - - 1 2 - 1 - 2 1 1 - 4 2 2 - 1 4 2 1 1 1 4 2 1 1 1 4 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 DIMENSIONS: mm & 4 of 4) MATERIAL PART NO 1 -77 -72 -71 -52 -51 -2 ATLANTIC VERSION -1 1 - - 1 1 1 1 1 1 1 1 - 1 1 1 1 - 1 1 1 - 1 1 1 1 - - 1 2 1 1 1 1 2 1 2-1803945-3 22278-9 4-18032-3 1803944-1 2-1803583-1 2119641-1 2119082-5 2079764-1 2119083-1 7-18023-7 2119580-1 2844940-1 994970-2 2119955-1 2844908-1 2844907-1 455888-6 1803607-3 2119791-5 2119943-1 2119740-1 2168078-1 2168083-2 5-18022-5 1338685-1 2168083-3 2168083-3 18023-9 2119652-1 2119653-1 1803583-9 1803515-1 1803602-1 1752356-6 2079383-5 2-2844962-6 2844992-1 455888-4 1320928-2 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-6 1999141-4 2119757-8 4-238011-0 2-1803018-5 455888-2 2-937157-5 1 REF REF REF REF REF REF - WIRE SIZE DESCRIPTION D F O WIRE STRIP LENGTH C LTR - - TERMINAL APPLICATION SPECIFICATION P TYPE APPLICATOR INSTRUCTIONS 408-35042 4.80-5.30 mm [.189-.209 IN] 66 PNEUMATIC CRIMP TOOLING KIT 2.19 mm [.086] TERMINAL NAME: REVISIONS DIST MECHANICAL PNEUMATIC AND CRIMP TOOLING KIT 1.78 mm [.070] TERMINAL DATA: 1 PNEUMATIC MECHANICAL AND CRIMP TOOLING KIT SIZE 2 PNEUMATIC SEAL STRIPPER CRIMPER TERMINATING UNIT APPLICATOR DATA 3 ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER FEED TYPE H H 4 LOC 2151836 -1 2151836 -2 5 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 20 6 - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH DWN 20NOV2012 CHK 20NOV2012 APVD 20NOV2012 L.ZHANG L.ZHANG S.XI - WEIGHT NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 2 4-18032-3 1 1803944-1 1 2-1803583-1 1 2119641-1 1 2119082-5 1 2079764_APP 1 2119083 1 7-18023-7 1 2119580-1 1 2844940-1 1 COUNTER_994970 1 2119955-1 1 2844908 1 2844907 1 455888-6 1 1803607_3 1 2119791-5 1 2119943-1 1 2119740-1 2 2168078-1 1 2168083-2 1 5-18022-5 1 1338685-1 4 2168083-3 2 2168083-3 3 18023-9 1 2119652 1 2119653 1 1803583-9 1 1803515-1 1 1803602-1 1 1752356-6 2 2079383-5 2 2-2844962-6 1 2844992-1 1 455888-4 1 1320928-2 1 2168083-2 2 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-6 1 1999141-4 .. 1 ITEM_7 .. 1 ITEM_6 1 2119757-8 1 4-238011-0 1 2-1803018-5 1 455888-2 1 2-937157-5 300 299 298 297 292 248 244 243 242 241 239 238 164 113 99 98 82 71 70 69 67 66 60 59 56 54 53 49 48 47 46 44 41 34 33 30 29 28 24 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 - 1 22278-9 TE Connectivity APPLICATION SPEC - 1 2-1803945-3 DESCRIPTION PRODUCT SPEC - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES TONKER SPRING, COMPRESSION SCR, SET, FLT PNT, M3 X 6.0 SPACER, TONKER APPLICATOR BASIC ASSEMBLY, SF FEED CAM, AIR FEED CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE COUNTER, MAGNETIC ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER DOCUMENTATION PACKAGE DEPRESSOR, WIRE WASHER, SPACER TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SKT HD CAP, RoHS, M4 X 8.0 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF ATLANTIC SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT anvil,combination DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O SPACER, CRIMPER CRIMPER, WIRE SPECIAL Ocean Side Feed Applicator - DRAWING NO 2151836 SCALE 1:2 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV H C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - FEED TYPE MECHANICAL A D 239 D 59 56 PNEUMATIC 44 2 244 A 243 238 298 242 297 59 2 3 8 0.5 REF 34 REF 82 1 C 1.0 53 SEE DETAIL A 1 2 3 299 56 C 1 4 70 300 69 TERMINAL SUPPORT LOCATION 28 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 5 41 44 293 REF 44.6 0.05 66 DETAIL A 67 2 164 33 B 19 A 24 RAM SET-UP 20 B 21 9 30 1 12 241 29 13 CAM POSITIONS 47 1 30mm STROKE 30mm STROKE 30mm STROKE ITEM 30 LOCATED AT FRONT HOLES 29 11 30 REF REF 20 248 48 113 5 46 292 98 99 34 54 8 1 60 54 10 FEED TRACK POSITION GUIDE BY INSULATION BARREL 1 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 40mm STROKE MECHANICAL POST FEED AMP 4805 REV 31MAR2000 49 40mm STROKE MECHANICAL PRE FEED 49 40mm STROKE AIR FEED DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH 20NOV2012 CHK 20NOV2012 APVD 20NOV2012 L.ZHANG L.ZHANG S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2151836 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV H 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION REVISION DESCRIPTION FEED TYPE 2- 2151836 -1 H FINE CRIMP HEIGHT ADJUST MECHANICAL 7- 2151836 -7 F CRIMP TOOLING KIT - H 4 3 2 LOC PART NUMBER 2- 2151836 -2 5 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 20 6 FINE CRIMP HEIGHT ADJUST REVISIONS DIST A PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - PNEUMATIC D D CRIMP WIRE INSUL APPLICATOR DATA SIZE TYPE F O 1.78 mm [.070] 2.19 mm [.086] APPLICATOR INSTRUCTIONS 408-35042 - 1 - TE TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION RECEPTACLE CONTACT, Au, SEALED TYPE, 1.0 SERIES TERMINAL NAME: WIRE STRIP LENGTH 4.80-5.30 mm [.189-.209 IN] C TERMINAL APPLICATION SPECIFICATION 1939351-1 114-5400 - TERMINALS APPLIED TE TERMINAL n - - n 4.80-5.30 mm [.189-.209 IN] TERMINAL APPLICATION SPECIFICATION 6 - TERMINALS APPLIED 5 TE TERMINAL C1__DWG_PN_1_0 WIRE STRIP LENGTH 1.80-2.20 mm [.071-.087 IN] - C1__DWG_PN_2_0 TE TERMINAL C1__DWG_PN_3_0 TE CRIMP SPECIFICATION TE TERMINAL TE TERMINAL C1__DWG_PN_4_0 1939351-1 C1__DWG_PN_1_1 5 - C1__DWG_PN_1_1 - - - - TE TERMINAL C1__DWG_PN_2_1 - C1__DWG_PN_3_0 - 1 - 1.25mm2 0.85mm2 0.75mm2 W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 1.20+/-0.05 [.047+/-.002] 1.12+/-0.05 [.044+/-.002] 1.09+/-0.05 [.043+/-.002] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 7.7 8.5 8.7 WIRE SIZE 4 6 W1__FA_SETTING_1 CRIMP HEIGHT mm [INCH] 1.00mm2 W1__DWG_WGAUGE_1 1.16+/-0.05 [.046+/-.002] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 8.1 4 - B REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 3 APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 4 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 6 THIS CRIMP PARAMETER IS PROVIDED TO MEET A CUSTOM AND UNIQUE CUSTOMER IT HAS BEEN EVALUATED AND IS CONDITIONALLY SPECIFIED BY TE CONNECTIVITY. CUSTOMIZED CRIMP PARAMETER IS NOT LISTED AS AN APPROVED APPLICATION WITHIN CONNECTIVITY APPLICATION SPECIFICATION; HOWEVER, IT HAS BEEN VALIDATED TE CONNECTIVITY SPECIFICATIONS 109-18079(TEST GROUP 1) AND 114-18022. - 1 1 1 1 1 1 1 1 1 1 - 1 - - - - - 1 - BARREL FRONT POINT HEIGHT (FRONT BOTTOM SURFACE BOX TO FRONT BARREL END) 1 1 - A 2 1 - 1 1 2 - 1 1 1 - 1.45 1 1 - 1 1 1 - 1 2 1 - BARREL FRONT POINT HEIGHT 2 2 - 1 1 2 - 1 1 1 - 7. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 1 1 - 1 2 - - - 2 1 - 1 1 2 - SPECIFIC 1 1 - PERFORM FURTHER DETAILED EVALUATION TO ASSESS PRODUCT PERFORMANCE IN THE APPLICATION. 2 1 - 1 1 2 - TE CONNECTIVITY EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES THAT THE PRODUCT PERFORM WILL SIMILARLY TO VALIDATED AND APPROVED APPLICATIONS, AS STATED WITHIN CONNECTIVITY TE APPLICATION SPECIFICATIONS, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR AS SUCH, IT IS HIGHLY RECOMMENDED THAT THE CUSTOMER FITNESS FOR PARTICULAR PURPOSE. 1 1 - REQUIREMENT. THIS A TE ACCORDING TO 1 1 - TERMINAL LUBRICANT IS RECOMMENDED. 1 1 - 5 1 1 - 2 1 1 - RECOMMENDED SPARE PARTS 1 1 - 1 1 1 - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 1 - W1__FA_SETTING_3 1 1 - W1__FA_SETTING_2 1 1 - W1__FA_SETTING_1 4 - - CRIMP HEIGHT mm [INCH] 1 4 - WIRE SIZE - 1 - 5 - REF REF - C1__DWG_PN_4_1 1 1 - - 1 - - TE TERMINAL C1__DWG_PN_3_1 1 1 - C1__DWG_PN_4_0 1 1 - C1__DWG_PN_2_0 1 1 - 6 TE TERMINAL C1__DWG_PN_1_0 1.80-2.20 mm [.071-.087 IN] 1 1 3 2 1 - INSULATION DIAMETER RANGE 1 2 - RECEPTACLE CONTACT, Sn, SEALED TYPE, 1.0 SERIES TERMINAL NAME: INSULATION DIAMETER RANGE - TE TERMINAL TERMINAL DATA: 1 - 1 1 1 1 - 1 1 1 1 1 DIMENSIONS: PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH DWN 20NOV2012 CHK 20NOV2012 APVD 20NOV2012 L.ZHANG L.ZHANG S.XI - WEIGHT NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 2 4-18032-3 1 1803944-1 1 2119082-5 1 2079764_APP 1 2119083 1 7-18023-7 1 2119580-1 1 2844940-1 1 COUNTER_994970 1 2119641-2 1 2168083-8 4 2168083-9 1 2119653-2 1 1-1803583-0 1 1803516-1 1 2119955-1 1 2844908 1 2844907 1 455888-6 1 1803607_3 1 2119791-5 1 2119943-1 1 2119740-1 2 2168078-1 1 5-18022-5 1 1338685-1 2 2168083-3 3 18023-9 1 2119652 1 1803602-1 1 1752356-6 2 2079383-5 2 2-2844962-6 1 2844992-1 1 455888-4 1 1320928-2 1 2168083-2 2 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-6 1 1999141-4 .. 1 ITEM_7 .. 1 ITEM_6 1 2119757-8 1 4-238011-0 1 2-1803018-5 1 455888-2 1 2-937157-5 300 299 298 297 244 243 242 241 239 238 164 151 144 143 142 141 140 113 99 98 82 71 70 69 67 66 59 56 53 49 48 41 34 33 30 29 28 24 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 - 1 22278-9 TE Connectivity APPLICATION SPEC - 1 2-1803945-3 DESCRIPTION PRODUCT SPEC - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES TONKER SPRING, COMPRESSION SCR, SET, FLT PNT, M3 X 6.0 SPACER, TONKER CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE COUNTER, MAGNETIC FEED CAM, AIR FEED SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP, RoHS, M4 X 20 FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF PACIFIC ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER DOCUMENTATION PACKAGE DEPRESSOR, WIRE WASHER, SPACER TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, HEX HD CAP, M4 X 6.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT anvil,combination DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O SPACER, CRIMPER CRIMPER, WIRE SPECIAL PART NO -77 -22 -21 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. AMP 4805 REV 31MAR2000 2-1803945-3 22278-9 4-18032-3 1803944-1 2119082-5 2079764-1 2119083-1 7-18023-7 2119580-1 2844940-1 994970-2 2119641-2 2168083-8 2168083-9 2119653-2 1-1803583-0 1803516-1 2119955-1 2844908-1 2844907-1 455888-6 1803607-3 2119791-5 2119943-1 2119740-1 2168078-1 5-18022-5 1338685-1 2168083-3 18023-9 2119652-1 1803602-1 1752356-6 2079383-5 2-2844962-6 2844992-1 455888-4 1320928-2 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-6 1999141-4 2119757-8 4-238011-0 2-1803018-5 455888-2 2-937157-5 1 Ocean Side Feed Applicator - DRAWING NO 2151836 SCALE 1:2 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV H C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 20 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - FEED TYPE MECHANICAL A D 239 140 59 D 2 244 56 243 PNEUMATIC 242 2 3 1.0 238 A 53 34 REF 59 82 298 C 1 TERMINAL SUPPORT LOCATION 1 2 3 299 56 SEE DETAIL A REF 8 297 0.5 C 1 4 300 70 69 28 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 5 41 140 35.57 REF 0.05 66 164 DETAIL A 67 2 33 24 B RAM SET-UP 19 A 20 30 B 21 29 9 1 ITEM 30 LOCATED AT FRONT HOLES 12 CAM POSITIONS 30mm STROKE 241 13 REF REF 29 1 30mm STROKE 30mm STROKE 142 30 151 113 48 5 141 98 99 34 143 8 1 144 143 10 1 20 11 FEED TRACK POSITION GUIDE BY INSULATION BARREL A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION 49 MECHANICAL POST FEED 49 MECHANICAL PRE FEED 49 AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH 20NOV2012 CHK 20NOV2012 APVD 20NOV2012 L.ZHANG L.ZHANG S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2151836 SCALE 1:2 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV H