8-2151973-5

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 PART NUMBER RELEASED FOR PUBLICATION REVISION 2151973 -2 D FEED TYPE FINE CRIMP HEIGHT ADJUST F 3- 2151973 -2 F FINE CRIMP HEIGHT ADJUST 7-2151973-1 F MECHANICAL AND CRIMP TOOLING KIT 7-2151973-2 F 7- 2151973 -7 B CRIMP WIRE INSUL 2 TE TERMINAL TE TERMINAL 1418972-1 n 114-18622 - C1__DWG_PN_1_1 6 - - - - INSULATION DIAMETER RANGE - - - - - 4 - C1__DWG_PN_2_0 TE TERMINAL C1__DWG_PN_3_0 - TE TERMINAL - C1__DWG_PN_4_0 - C1__DWG_PN_2_1 - WIRE SIZE 0.53mm2 0.35mm2 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 0.93+/-0.03 [.037+/-.001] 0.81+/-0.03 [.032+/-.001] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 - 3 7.0 8.2 - W1__FA_SETTING_1 - W1__FA_SETTING_2 6 1 B 2 3 4 - RECOMMENDED SPARE PARTS - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. - TERMINAL LUBRICANT IS RECOMMENDED. - 5. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 6 THIS APPLICATOR IS EQUIPPED WITH THE DOUBLE ACTING FEED WITH SENSORS AND IS APPLICATION SPECIFIC. IT DOES NOT REQUIRE ITEMS 49 & 248. - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 - 1 - 1 1 1 - 1 A 1 1 1 1 - 1 - - 1 C ECR-17-014825 09OCT2017 MZ KZ D ECR-19-006462 23APR2019 FJ TE E ECR-19-007109 03MAY2019 LG TE F ECR-20-009518 03JUL2020 FZ TE 1 - 1 1 1 1 1 1 1 1 2 1 1 1 1 4 2 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 1 ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - - 1 PART NO - 1 TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH -1 - THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: 1 - - - 2 1 - - - - 1 - - 1 - 1 - 1 1 - 1 1 1 1 - 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 1 1 - 1 1 2 - - 1 1 1 - 1 1 1 - 1 1 1 1 2 2 1 1 1 4 2 1 1 1 4 2 1 1 1 4 2 1 1 1 4 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - REF REF 1 1 1 1 REF 1 1 - - 1 - 1 - 2844950-1 2119641-1 7-18023-7 2119580-1 2844940-1 994970-2 1-18028-2 2119955-1 2844908-1 2844907-1 1-455888-1 5-547505-2 854769-8 1803607-3 2119740-1 2168078-1 2168083-2 5-18022-5 21028-2 1338685-1 2168083-3 1-2168083-0 5018030-1 811242-5 690753-2 18023-9 2119652-1 2119653-1 1803583-9 1803515-1 1803602-1 3-1752356-8 2079383-5 2-2844962-3 2844992-1 455888-3 1320928-2 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-6 2-1633733-2 2119780-9 1803212-1 - 1 1 REF REF 1 - -77 -72 -71 -32 -2 AMP 4805 REV 31MAR2000 APVD D 4 TE TERMINAL 1418973-1 C1__DWG_PN_1_0 DWN - CENTER CONTACT, HF FAKRA 2. RTK031 TERMINALS APPLIED DATE PNEUMATIC TE CRIMP SPECIFICATION WIRE STRIP LENGTH C DESCRIPTION MECHANICAL - TERMINAL APPLICATION SPECIFICATION LTR F - APPLICATOR INSTRUCTIONS 408-35042 2.30-2.70 mm [.091-.106 IN] P TYPE - TERMINAL NAME: 66 DOUBLE ACTING PNEUMATIC WITH SENSORS 6 CRIMP TOOLING KIT 1.27 mm [.050] TERMINAL DATA: REVISIONS DIST A ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER 1 PNEUMATIC PNEUMATIC AND CRIMP TOOLING KIT SIZE 3 MECHANICAL FINE CRIMP HEIGHT ADJUST APPLICATOR DATA 4 LOC DESCRIPTION F 5 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 2151973 -1 6 - AIR FEED MODULE FEED CAM, AIR FEED SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE COUNTER, MAGNETIC WASHER, FLAT, REG M4 ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER SPRING, COMPRESSION HOLDER, INS DOCUMENTATION PACKAGE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SKT HD CAP, RoHS, M4 X 8.0 SCR, HEX HD CAP, M4 X 6.0 PIN, SLOTTED SPRING .062 X .250 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP, RoHS, M4 X 10 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF ATLANTIC SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, WIRE DEPRESSOR, SHEAR CRIMPER, WIRE PREMIUM DWN 17JUN2013 CHK 18JUN2013 APVD 18JUN2013 R.O.WILSON K.J.STAKEM T.L.ELBIN NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 1 2119580-1 1 2844940-1 1 COUNTER_994970 1 1-18028-2 1 2119955-1 1 2844908 1 2844907 1 1-455888-1 1 SIMP_5-547505-2 1 854769-8 1 1803607_3 1 2119740-1 2 2168078-1 1 2168083-2 1 5-18022-5 1 21028-2 1 1338685-1 4 2168083-3 2 1-2168083-0 1 5018030-1 1 811242-5_OLD 1 690753-2 3 18023-9 1 2119652 1 2119653 1 1803583-9 1 1803515-1 1 1803602-1 1 3-1752356-8 2 2079383-5 2 2-2844962-3 1 2844992-1 1 455888-3 1 1320928-2 1 2168083-2 1 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-6 1 2-1633733-2 .. 1 ITEM_6 1 2119780-9 .. 1 ITEM_4 .. 1 ITEM_3 .. 1 ITEM_2 1 1803212-1 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 7-18023-7 290 248 241 239 238 164 119 113 99 98 82 77 74 71 67 66 60 59 58 56 54 53 52 51 50 49 48 47 46 44 41 34 33 30 29 28 24 21 20 19 13 12 11 10 9 8 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2119641-1 DESCRIPTION PRODUCT SPEC - 1 2844950-1 Ocean Side Feed Applicator - DRAWING NO 2151973 SCALE 1:2 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV F C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - FEED TYPE MECHANICAL A D 239 D 59 56 PNEUMATIC 44 2 53 A 238 50 8 59 0.5 82 1 C 1.0 REF 34 REF 1 C SEE DETAIL A TERMINAL SUPPORT LOCATION 52 56 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 28 51 5 41 44 REF 44.81 DETAIL A 66 2 164 DOUBLE ACTING PNEUMATIC WITH SENSORS 67 77 290 33 B 59 58 A 24 A 0.05 RAM SET-UP 74 19 30 20 29 21 B 9 56 1 12 SEE DETAIL A ITEM 30 LOCATED AT FRONT HOLES 241 CAM POSITIONS 13 47 1 11 30mm STROKE 30mm STROKE 30mm STROKE 119 113 4 46 98 99 34 54 8 1 60 54 10 1 FEED TRACK POSITION GUIDE BY WIRE BARREL 248 48 REF 30 29 REF A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 40mm STROKE MECHANICAL POST FEED AMP 4805 REV 31MAR2000 49 40mm STROKE MECHANICAL PRE FEED 49 40mm STROKE AIR FEED DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 17JUN2013 CHK 18JUN2013 APVD 18JUN2013 R.O.WILSON K.J.STAKEM T.L.ELBIN TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2151973 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV F 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 REVISION DESCRIPTION FEED TYPE 2- 2151973 -1 F FINE CRIMP HEIGHT ADJUST MECHANICAL DOUBLE ACTING PNEUMATIC WITH SENSORS 6 F 3 2 LOC PART NUMBER 2- 2151973 -2 4 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 5 FINE CRIMP HEIGHT ADJUST 4- 2151973 -2 F FINE CRIMP HEIGHT ADJUST 7- 2151973 -7 B CRIMP TOOLING KIT REVISIONS DIST A PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - PNEUMATIC - D D CRIMP WIRE INSUL APPLICATOR DATA SIZE TYPE F - 1.27 mm [.050] - APPLICATOR INSTRUCTIONS 408-35042 TE TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION WIRE STRIP LENGTH 2.30-2.70 mm [.091-.106 IN] TERMINAL APPLICATION SPECIFICATION 1418972-1 114-18622 - TERMINALS APPLIED TE TERMINAL n 1418973-1 C1__DWG_PN_1_1 - - - TE TERMINAL C1__DWG_PN_3_0 TE TERMINAL 4 WIRE SIZE 0.53mm2 0.35mm2 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 0.93+/-0.03 [.037+/-.001] 0.81+/-0.03 [.032+/-.001] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 3 7.0 8.2 6 B 1 2 3 4 RECOMMENDED SPARE PARTS 5. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 6 THIS APPLICATOR IS EQUIPPED WITH THE DOUBLE ACTING FEED WITH SENSORS AND IS APPLICATION SPECIFIC. IT DOES NOT REQUIRE ITEMS 49 & 151. 1 *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 1 1 1 A 1 - - - - - 1 - 1 - - 1 - 1 - 1 1 - - 1 1 1 - 1 1 1 - 1 1 1 1 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 2 1 1 - TERMINAL LUBRICANT IS RECOMMENDED. 2 2 1 - 1 2 2 - 1 1 2 - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 1 1 1 - 2 - 1 - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 1 1 - - 1 1 - - 1 1 1 - 2 1 1 - 1 2 1 - 1 1 2 - 1 1 1 - 2 1 1 - 1 2 1 - 1 1 2 - 1 1 1 - 1 1 1 - 1 1 1 - W1__FA_SETTING_2 1 1 1 - W1__FA_SETTING_1 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 4 - 1 - C1__DWG_PN_2_1 1 4 - - C1__DWG_PN_4_0 - 1 4 C1__DWG_PN_2_0 1 1 - - REF REF - - 1 1 REF - 4 TE TERMINAL C1__DWG_PN_1_0 - - 1 - - 2844950-1 7-18023-7 2119580-1 2844940-1 994970-2 2119641-2 2168083-8 2168083-9 2119653-2 1-1803583-0 1803516-1 1-18028-2 2119955-1 2844908-1 2844907-1 1-455888-1 5-547505-2 854769-8 1803607-3 2119740-1 2168078-1 5-18022-5 21028-2 1338685-1 1-2168083-0 5018030-1 811242-5 690753-2 18023-9 2119652-1 1803602-1 3-1752356-8 2079383-5 2-2844962-3 2844992-1 455888-3 1320928-2 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-6 2-1633733-2 2119780-9 1803212-1 - 1 - - 6 - 1 - INSULATION DIAMETER RANGE - 1 - CENTER CONTACT, HF FAKRA 2. RTK031 TERMINAL NAME: C - - - 1 - 1 1 PART NO -77 -42 -22 -21 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 AMP 4805 REV 31MAR2000 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - AIR FEED MODULE SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE COUNTER, MAGNETIC FEED CAM, AIR FEED SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP, RoHS, M4 X 20 FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF PACIFIC WASHER, FLAT, REG M4 ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER SPRING, COMPRESSION HOLDER, INS DOCUMENTATION PACKAGE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, HEX HD CAP, M4 X 6.0 PIN, SLOTTED SPRING .062 X .250 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 10 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, WIRE DEPRESSOR, SHEAR CRIMPER, WIRE PREMIUM DWN 17JUN2013 CHK 18JUN2013 APVD 18JUN2013 R.O.WILSON K.J.STAKEM T.L.ELBIN NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 1 2844940-1 1 COUNTER_994970 1 2119641-2 1 2168083-8 4 2168083-9 1 2119653-2 1 1-1803583-0 1 1803516-1 1 1-18028-2 1 2119955-1 1 2844908 1 2844907 1 1-455888-1 1 SIMP_5-547505-2 1 854769-8 1 1803607_3 1 2119740-1 2 2168078-1 1 5-18022-5 1 21028-2 1 1338685-1 2 1-2168083-0 1 5018030-1 1 811242-5_OLD 1 690753-2 3 18023-9 1 2119652 1 1803602-1 1 3-1752356-8 2 2079383-5 2 2-2844962-3 1 2844992-1 1 455888-3 1 1320928-2 1 2168083-2 1 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-6 1 2-1633733-2 .. 1 ITEM_6 1 2119780-9 .. 1 ITEM_4 .. 1 ITEM_3 .. 1 ITEM_2 1 1803212-1 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2119580-1 290 241 239 238 164 151 144 143 142 141 140 119 113 99 98 82 77 74 71 67 66 59 58 56 53 52 51 50 49 48 41 34 33 30 29 28 24 21 20 19 13 12 11 10 9 8 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 7-18023-7 DESCRIPTION PRODUCT SPEC - 1 2844950-1 Ocean Side Feed Applicator - DRAWING NO 2151973 SCALE 1:2 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV F C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 20 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - FEED TYPE MECHANICAL A D D 239 59 56 PNEUMATIC 140 53 238 A 2 8 50 1.0 REF 34 59 52 C 56 1 C 1 51 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 28 5 41 140 REF 35.78 164 DETAIL A 77 RAM SET-UP 58 A 24 A B 67 33 290 19 74 20 30 59 9 21 B 1 12 29 56 241 SEE DETAIL A 13 ITEM 30 LOCATED AT FRONT HOLES 1 30 CAM POSITIONS 30mm STROKE REF REF 29 30mm STROKE 30mm STROKE 142 0.05 66 2 DOUBLE ACTING PNEUMATIC WITH SENSORS REF TERMINAL SUPPORT LOCATION 82 SEE DETAIL A 0.5 151 113 48 4 141 98 99 34 143 8 1 144 143 10 1 119 FEED TRACK POSITION GUIDE BY WIRE BARREL 11 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION 49 MECHANICAL POST FEED 49 MECHANICAL PRE FEED 49 AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 17JUN2013 CHK 18JUN2013 APVD 18JUN2013 R.O.WILSON K.J.STAKEM T.L.ELBIN TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2151973 SCALE 1:2 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV F