8-2266113-4

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 PART NUMBER RELEASED FOR PUBLICATION REVISION DESCRIPTION FINE CRIMP HEIGHT ADJUST MECHANICAL 5-2266113-1 E SEAL STRIPPER CRIMPER TERMINATING UNIT MECHANICAL 5-2266113-2 E 7-2266113-1 E 7-2266113-2 E 7- 2266113 -7 B FINE CRIMP HEIGHT ADJUST 2 A PNEUMATIC AND CRIMP TOOLING KIT PNEUMATIC APPLICATOR CONVERSION KIT - CRIMP TOOLING KIT WIRE INSUL PART NUMBER 2.79 mm [.110] APPLICATOR INSTRUCTIONS 408-35042 - INSULATION DIAMETER RANGE 7-2266112-8 F O 2.62 mm [.103] 3 7-2266113-8 - 7-2266114-8 - 7-2266115-8 - DEUTSCH TERMINAL TERMINAL DATA: WIRE STRIP LENGTH 4.44-5.72 mm [.175-.225 IN] C TERMINAL APPLICATION SPECIFICATION 2113238-3 114-151001 C1__DWG_PN_1_1 1060-16-1277 C1__DWG_PN_1_2 - - - TERMINAL APPLICATION SPECIFICATION 114-151001 - TERMINALS APPLIED C1__DWG_PN_2_0 C1__DWG_PN_2_1 TE TERMINAL 2113238-2 C1__DWG_PN_3_0 C1__DWG_PN_3_1 n 4.44-5.72 mm [.175-.225 IN] 5 DEUTSCH TERMINAL 1060-16-1222 C1__DWG_PN_1_0 - TE CRIMP SPECIFICATION WIRE STRIP LENGTH 2.72-3.12 mm [.107-.123 IN] DEUTSCH TERMINAL 1060-16-1244 C1__DWG_PN_4_0 C1__DWG_PN_4_1 C1__DWG_PN_2_2 TE TERMINAL 1949119-1 1949119-3 1949119-5 3 STAMPED CONTACT SOCKET SIZE 16 TERMINAL NAME: INSULATION DIAMETER RANGE - TERMINALS APPLIED TE TERMINAL 2113238-1 n DEUTSCH TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION STAMPED CONTACT PIN SIZE 16 TERMINAL NAME: C2__DWG_PN_1_0 C2__DWG_PN_1_1 C2__DWG_PN_1_2 C2__DWG_PN_1_3 - - 2.72-3.12 mm [.107-.123 IN] - - - - - 5 5 DEUTSCH TERMINAL 1062-16-1222 1062-16-1277 1062-16-1444 C2__DWG_PN_2_0 C2__DWG_PN_2_1 C2__DWG_PN_2_2 C2__DWG_PN_2_3 TE TERMINAL 1949119-2 1949119-4 1949119-6 C2__DWG_PN_3_0 C2__DWG_PN_3_1 C2__DWG_PN_3_2 C2__DWG_PN_3_3 DEUTSCH TERMINAL 1062-16-1244 1062-16-1422 1062-16-1477 - INSULATION DIAMETER RANGE - - - C2__DWG_PN_4_0 1 C2__DWG_PN_4_1 - C2__DWG_PN_4_2 - C2__DWG_PN_4_3 - WIRE SIZE 12 AWG 2.50mm2 14 AWG 2.00mm2 1.50mm2 16 AWG 1.00mm2 1 B 2 3 4 5 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 W1__DWG_WGAUGE_5 W1__DWG_WGAUGE_6 W1__DWG_WGAUGE_7 1.78+0.03/-0.05 [.070+.001/-.002] 1.73+0.03/-0.05 [.068+.001/-.002] 1.65+0.03/-0.05 [.065+.001/-.002] 1.63+0.03/-0.05 [.064+.001/-.002] 1.50+0.03/-0.05 [.059+.001/-.002] 1.47+0.03/-0.05 [.058+.001/-.002] 1.40+0.03/-0.05 [.055+.001/-.002] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 W1__DWG_CRIMP_HT_5 W1__DWG_CRIMP_HT_6 W1__DWG_CRIMP_HT_7 4.8 5.3 6.1 6.3 7.6 7.9 8.6 - 4 - W1__FA_SETTING_1 - W1__FA_SETTING_2 - W1__FA_SETTING_3 - W1__FA_SETTING_4 - W1__FA_SETTING_5 - W1__FA_SETTING_6 *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING. REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. W1__FA_SETTING_7 RECOMMENDED SPARE PARTS REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. - APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEM 180. - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. - TERMINAL LUBRICANT IS RECOMMENDED. 1 6. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 7 SEE APPROPRIATE APPLICATOR LOG SHEETS FOR APPLIED TERMINALS, WIRE RANGE AND MEMORY CHIP. 1 1 1 1 - A 1 1 1 - - - - - - - 1 - 1 - 1 - 1 - 1 - - - 1 - - - - - - - - - - - - - - - - 1 1 1 1 1 - 1 1 1 - DESCRIPTION DATE DWN APVD B3 ECR-18-003740 12MAR2018 FL GB C ECR-18-014589 16SEP2018 TB TE D ECR-19-009412 16JUN2019 TB TE E ECR-21-006674 02JUL2021 FJ TE 1 1 - - 1 1 - - 1 1 - 1 - 1 - 1 - - - 1 - 2 - 1 - 2 - 1 - 1 - 1 - 4 - 2 - 1 - 1 - 1 - 1 - - - - - 1 - 1 - 1 - 1 - 2 - 2 - 1 - 1 - 1 - 2 - 1 - 1 - 1 - 1 - 1 - 1 1 2 - 1 - - - 1 - 1 1 2 - 1 1 2 1 1 1 1 1 1 2 1 2 1 1 1 4 2 1 1 1 2 1 1 1 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 2 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 - 1 1 1 1 - 1 1 - 1 2 1 1 - 2 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 - 1 1 - - - 2 - 1 - 1 1 1 - 1 1 2 - 1 1 1 1 2 1 1 1 4 2 1 1 1 4 2 1 1 1 4 2 1 1 1 4 2 1 1 1 1 2 1 1 2 1 2 1 1 2 1 2 - 1 2 1 1 - 1 2 1 1 - 1 1 1 1 - 1 1 1 1 1 1 1 1 1 1 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 DIMENSIONS: mm & 4 of 4) MATERIAL PART NO - REF REF REF REF REF REF - ATLANTIC VERSION -1 - - 1 1 - - 1 1 - - 1 1 - - 1 1 - - 1 1 - - 1 1 1 1 1 1 1 - - 1 1 1 1 1 1 1 1 - 1 1 1 1 - 1 1 1 - 1 1 1803515-3 2-1803583-1 2119641-1 2119082-9 2079764-1 2119083-1 7-18023-7 2119580-1 2844940-1 4-1722335-3 1-5018030-0 1-1752354-9 993111-1 5-22280-0 1752353-3 1901680-2 994970-2 1-18028-2 2119955-1 2844908-1 2844907-1 455888-4 2266113 1803607-3 2119791-9 2119740-1 2168078-1 2168083-2 5-18022-5 1338683-8 2168083-3 2168083-3 5018030-1 811242-5 690753-2 18023-9 2119652-1 2119653-1 1803583-9 1803515-1 1803602-1 2-1752356-0 2079383-5 2-2844962-8 2844992-1 1320928-6 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-1 1803293-9 2-240641-8 1-2119757-0 238011-9 1803019-4 455888-7 4-1633713-2 - -78 -77 -72 -71 -52 -51 -2 AMP 4805 REV 31MAR2000 LTR D APPLICATOR CONVERSION KITS 7 TYPE P - - SIZE 66 MECHANICAL - CRIMP REVISIONS DIST PNEUMATIC MECHANICAL AND CRIMP TOOLING KIT APPLICATOR DATA 1 PNEUMATIC SEAL STRIPPER CRIMPER TERMINATING UNIT B 3 ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER FEED TYPE E 7-2266113-8 4 LOC 2266113 -1 E 5 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 2266113 -2 D 6 - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH DWN 14-Oct-13 CHK 14-Oct-13 APVD 14-Oct-13 R.KNEPPER G.BAILEY M.CLIFFORD - WEIGHT NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 1 2119641-1 1 2119082-9 1 2079764_APP 1 2119083 1 7-18023-7 1 2119580-1 1 2844940-1 1 4-1722335-3 1 1-5018030-0 1 1-1752354-9 1 993111-1 1 SIMP_5-22280-0 1 1752353-3 1 1901680-2 1 COUNTER_994970 1 1-18028-2 1 2119955-1 1 2844908 1 2844907 1 455888-4 1 2266113_LOGSHEET 1 1803607_3 2 2119791-9 1 2119740-1 2 2168078-1 1 2168083-2 1 5-18022-5 1 1338683-8 4 2168083-3 2 2168083-3 1 5018030-1 1 811242-5_OLD 1 690753-2 3 18023-9 1 2119652 1 2119653-1 1 1803583-9 1 1803515-1 1 1803602-1 1 2-1752356-0 2 2079383-5 2 2-2844962-8 1 2844992-1 1 1320928-6 1 2168083-2 1 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-1 1 1803293-9 1 2-240641-8 .. 1 ITEM_6 1 1-2119757-0 1 238011-9 1 1803019-4 1 455888-7 1 4-1633713-2 293 292 248 244 243 242 241 239 238 182 181 180 177 176 175 174 164 119 113 99 98 82 72 71 70 67 66 60 59 56 54 53 52 51 50 49 48 47 46 44 41 34 33 30 29 24 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 - 1 2-1803583-1 TE Connectivity APPLICATION SPEC - 1 1803515-3 DESCRIPTION PRODUCT SPEC - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES RAM ASSEMBLY, SF ATLANTIC APPLICATOR BASIC ASSEMBLY, SF FEED CAM, AIR FEED CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE STRIPPER, SIDE FEED NUT, HEX, REG, RoHS, M3.5 STANDOFF,HOLD-DOWN PIN, SLOTTED SPRING 3.0 X 20.0 SPRING, COMPRESSION GUIDE PIN,HOLDDOWN GUIDE PIN,HOLDDOWN COUNTER, MAGNETIC WASHER, FLAT, REG M4 ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER PRINT, APPLICATOR LOG SHEET DOCUMENTATION PACKAGE DEPRESSOR, WIRE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SKT HD CAP, RoHS, M4 X 8.0 SCR, HEX HD CAP, M4 X 6.0 FEED PAWL SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP, RoHS, M4 X 12.0 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF ATLANTIC SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEUTSCH STYLE SPACER DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O SPACER, CRIMPER CRIMPER, WIRE PREMIUM Ocean Side Feed Applicator - DRAWING NO 2266113 SCALE 1:2 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV E C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - FEED TYPE MECHANICAL A D 239 D 59 56 44 PNEUMATIC 2 293 244 53 A 50 238 243 7 242 3 8 59 82 1 52 C 2 1 34 REF 2 51 SEE DETAIL A 70 3 C 1 177 56 4 2 176 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 2 TERMINAL SUPPORT LOCATION 70 5 41 174 44 293 REF 181 2 44.25 175 182 DETAIL A 3 164 33 0.05 19.0 66 180 2 RAM AND HOLDDOWN SET-UP 19 30 20 29 21 B 9 1 ITEM 30 LOCATED AT REAR HOLES 12 241 CAM POSITIONS 13 47 30 29 REF 1 30mm STROKE 119 113 5 46 292 98 99 34 54 8 1 60 54 10 1 248 48 REF 11 30mm STROKE 30mm STROKE 0.5 67 A 24 B 0.0 REF FEED TRACK POSITION GUIDE BY INSULATION BARREL A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 40mm STROKE MECHANICAL POST FEED AMP 4805 REV 31MAR2000 49 40mm STROKE MECHANICAL PRE FEED 49 40mm STROKE AIR FEED DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH 14-Oct-13 CHK 14-Oct-13 APVD 14-Oct-13 R.KNEPPER G.BAILEY M.CLIFFORD TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2266113 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV E 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 REVISION DESCRIPTION FEED TYPE 2- 2266113 -1 E FINE CRIMP HEIGHT ADJUST MECHANICAL 7- 2266113 -7 B CRIMP TOOLING KIT - E 7-2266113-8 FINE CRIMP HEIGHT ADJUST B 3 2 LOC PART NUMBER 2- 2266113 -2 4 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 5 REVISIONS DIST A PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - PNEUMATIC APPLICATOR CONVERSION KIT - D D CRIMP WIRE INSUL APPLICATOR DATA APPLICATOR CONVERSION KITS 7 SIZE PART NUMBER TYPE 7-2266112-8 F O 2.62 mm [.103] 2.79 mm [.110] APPLICATOR INSTRUCTIONS 408-35042 INSULATION DIAMETER RANGE 7-2266113-8 7-2266114-8 7-2266115-8 - DEUTSCH TERMINAL TERMINAL DATA: WIRE STRIP LENGTH 4.44-5.72 mm [.175-.225 IN] C TERMINAL APPLICATION SPECIFICATION 2113238-1 2113238-3 WIRE SIZE 12 AWG 2.50mm2 14 AWG 2.00mm2 1.50mm2 16 AWG 1.00mm2 1 B 2 114-151001 1060-16-1222 1060-16-1277 C1__DWG_PN_1_1 C1__DWG_PN_1_2 - - - W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 W1__DWG_WGAUGE_5 W1__DWG_WGAUGE_6 W1__DWG_WGAUGE_7 C1__DWG_PN_2_0 C1__DWG_PN_2_1 TE TERMINAL 2113238-2 C1__DWG_PN_3_0 C1__DWG_PN_3_1 DEUTSCH TERMINAL 1060-16-1244 TE TERMINAL 1949119-1 C1__DWG_PN_4_0 C1__DWG_PN_4_1 1949119-3 C1__DWG_PN_2_2 1949119-5 1.78+0.03/-0.05 [.070+.001/-.002] 1.73+0.03/-0.05 [.068+.001/-.002] 1.65+0.03/-0.05 [.065+.001/-.002] 1.63+0.03/-0.05 [.064+.001/-.002] 1.50+0.03/-0.05 [.059+.001/-.002] 1.47+0.03/-0.05 [.058+.001/-.002] 1.40+0.03/-0.05 [.055+.001/-.002] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 W1__DWG_CRIMP_HT_5 W1__DWG_CRIMP_HT_6 W1__DWG_CRIMP_HT_7 4.8 5.3 6.1 6.3 7.6 7.9 8.6 - C2__DWG_PN_1_0 C2__DWG_PN_1_1 C2__DWG_PN_1_2 C2__DWG_PN_1_3 DEUTSCH TERMINAL 1062-16-1222 1062-16-1277 1062-16-1444 4 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. - - - C2__DWG_PN_2_0 C2__DWG_PN_2_1 C2__DWG_PN_2_2 C2__DWG_PN_2_3 TE TERMINAL 1949119-2 1949119-4 1949119-6 C2__DWG_PN_3_0 C2__DWG_PN_3_1 C2__DWG_PN_3_2 C2__DWG_PN_3_3 DEUTSCH TERMINAL 1062-16-1244 1062-16-1422 1062-16-1477 5 C2__DWG_PN_4_3 4 W1__FA_SETTING_4 SEE APPROPRIATE APPLICATOR LOG SHEETS FOR APPLIED TERMINALS, WIRE RANGE AND 1 MEMORY CHIP. 1 1 1 A 1 1 1 - 1 1 - 1 1 - 1 - - - 1 - 1 1 1 - 1 1 1 - 1 1 - - 1 1 - - 1 1 - - 1 1 - 1 1 1 - - 1 1 - - 1 1 - - 1 1 - - 2 1 - - 2 2 - - 1 2 - - TERMINAL LUBRICANT IS RECOMMENDED. 1 1 - - 1 1 - - 2 - - - 1 1 - - 1 1 - - 1 1 - - 2 1 - - 1 2 - - 1 1 - - 2 1 - - 1 2 - - 2 1 - - 1 2 - - - 1 - - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING. REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. W1__FA_SETTING_7 1 - - - W1__FA_SETTING_6 1 1 - - W1__FA_SETTING_5 1 1 - - W1__FA_SETTING_3 1 1 - - W1__FA_SETTING_2 1 1 - - W1__FA_SETTING_1 1 1 - 1 1 1 - - 1 1 - - 4 - - - 1 4 - - C2__DWG_PN_4_2 - 1 - - C2__DWG_PN_4_1 1 - - C2__DWG_PN_4_0 - REF REF - - 1 1 - - 1 - - - 1 1 - - 1 1 - - 6. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 7 - 2119082-9 2079764-1 2119083-1 7-18023-7 2119580-1 2844940-1 994970-2 2119641-2 2168083-8 2168083-9 2119653-2 1-1803583-0 1803516-1 1-18028-2 2119955-1 2844908-1 2844907-1 455888-4 2266113 1803607-3 2119791-9 2119740-1 2168078-1 5-18022-5 1338683-8 2168083-3 5018030-1 811242-5 690753-2 18023-9 2119652-1 1803602-1 2-1752356-0 2079383-5 2-2844962-8 2844992-1 1320928-6 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-1 1803293-9 2-240641-8 1-2119757-0 238011-9 1803019-4 455888-7 4-1633713-2 1 1 - - 2.72-3.12 mm [.107-.123 IN] - - INSULATION DIAMETER RANGE 1 - - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 3 5 RECOMMENDED SPARE PARTS 3 5 114-151001 TERMINALS APPLIED CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 TERMINAL APPLICATION SPECIFICATION 5 DEUTSCH TERMINAL C1__DWG_PN_1_0 - n 4.44-5.72 mm [.175-.225 IN] 2.72-3.12 mm [.107-.123 IN] - TERMINALS APPLIED TE TERMINAL n TE CRIMP SPECIFICATION WIRE STRIP LENGTH INSULATION DIAMETER RANGE - STAMPED CONTACT SOCKET SIZE 16 TERMINAL NAME: STAMPED CONTACT PIN SIZE 16 TERMINAL NAME: DEUTSCH TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION - 1 1 - 1 1 1 1 1 1 PART NO -78 -77 -22 -21 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 AMP 4805 REV 31MAR2000 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH DWN 14-Oct-13 CHK 14-Oct-13 APVD 14-Oct-13 R.KNEPPER G.BAILEY M.CLIFFORD - WEIGHT NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 1 2119083 1 7-18023-7 1 2119580-1 1 2844940-1 1 COUNTER_994970 1 2119641-2 1 2168083-8 4 2168083-9 1 2119653-2 1 1-1803583-0 1 1803516-1 1 1-18028-2 1 2119955-1 1 2844908 1 2844907 1 455888-4 1 2266113_LOGSHEET 1 1803607_3 2 2119791-9 1 2119740-1 2 2168078-1 1 5-18022-5 1 1338683-8 2 2168083-3 1 5018030-1 1 811242-5_OLD 1 690753-2 3 18023-9 1 2119652 1 1803602-1 1 2-1752356-0 2 2079383-5 2 2-2844962-8 1 2844992-1 1 1320928-6 1 2168083-2 1 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-1 1 1803293-9 1 2-240641-8 .. 1 ITEM_6 1 1-2119757-0 1 238011-9 1 1803019-4 1 455888-7 1 4-1633713-2 244 243 242 241 239 238 164 151 144 143 142 141 140 119 113 99 98 82 72 71 70 67 66 59 56 53 52 51 50 49 48 41 34 33 30 29 24 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 - 1 2079764_APP TE Connectivity APPLICATION SPEC - 1 2119082-9 DESCRIPTION PRODUCT SPEC - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE COUNTER, MAGNETIC FEED CAM, AIR FEED SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP, RoHS, M4 X 20 FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF PACIFIC WASHER, FLAT, REG M4 ASSY, LUBRICATOR, SIDE FEED SCREW, LOCKING POST, LOCKING SPACER, CRIMPER PRINT, APPLICATOR LOG SHEET DOCUMENTATION PACKAGE DEPRESSOR, WIRE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, HEX HD CAP, M4 X 6.0 FEED PAWL SCR, SKT HD CAP, RoHS, M4 X 12.0 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEUTSCH STYLE SPACER DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O SPACER, CRIMPER CRIMPER, WIRE PREMIUM Ocean Side Feed Applicator - DRAWING NO 2266113 SCALE 1:2 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV E C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 20 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - FEED TYPE MECHANICAL A D 239 140 59 D 2 244 56 PNEUMATIC 243 53 242 50 A 238 2 3 0.0 7 REF 8 34 59 52 C 82 1 51 SEE DETAIL A REF TERMINAL SUPPORT LOCATION 1 C 2 70 56 3 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 1 4 70 5 41 35.22 140 REF 0.05 66 164 DETAIL A 2 67 33 RAM SET-UP A 24 B 19 20 30 B 9 21 29 1 12 241 13 CAM POSITIONS 30mm STROKE 1 30 REF REF 29 30mm STROKE 30mm STROKE 142 ITEM 30 LOCATED AT REAR HOLES 151 113 48 5 141 98 99 34 143 8 1 144 143 10 1 119 FEED TRACK POSITION GUIDE BY INSULATION BARREL 11 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION 49 MECHANICAL POST FEED 49 MECHANICAL PRE FEED 49 AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH 14-Oct-13 CHK 14-Oct-13 APVD 14-Oct-13 R.KNEPPER G.BAILEY M.CLIFFORD TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2266113 SCALE 1:2 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV E