0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
8-2266142-5

8-2266142-5

  • 厂商:

    HUMIREL(泰科)

  • 封装:

    -

  • 描述:

    OC-PMC-AT-PA-S-F-S

  • 数据手册
  • 价格&库存
8-2266142-5 数据手册
7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER 5 4 3 2 20 REVISION 2266142 -1 DESCRIPTION A 2266142 -2 2266142 -5 A NON-CRIMP HEIGHT ADJUST 2266142 -7 A FINE CRIMP HEIGHT ADJUST A SUPERSEDED BY 5-2151417-1 PNEUMATIC SERVO LATCH PLATE FINE CRIMP HEIGHT ADJUST 2266142 -6 7- 2266142 -7 4 CRIMP TOOLING KIT - SUPERSEDED BY 5-2151417-2 - 4 SERVO LATCH PLATE 12 NONE 6 - OBSOLETE - OBSOLETE - - OBSOLETE - - - CRIMP WIRE INSUL APPLICATOR DATA SIZE - TYPE - F O 2.00 mm [.079] 3.94 mm [.155] APPLICATOR INSTRUCTIONS 408-10389 - - - MFR TERMINAL TERMINAL DATA: WIRE STRIP LENGTH n 4.20-4.80 mm [.165-.189 IN] C TERMINAL APPLICATION SPECIFICATION - LEAR CRIMP SPECIFICATION TERMINAL TERMINAL NAME: LEAR SPEC Rev 1 - 6 INSULATION DIAMETER RANGE 1949751-2 C1__DWG_PN_1_1 7815102 C1__DWG_PN_1_2 - - - - - - - - GWH/LEAR TERMINAL 26806.201.184 C1__DWG_PN_1_0 - - 1.20-2.10 mm [.047-.083 IN] TERMINALS APPLIED TE TERMINAL 1949751-1 C1__DWG_PN_2_0 C1__DWG_PN_2_1 C1__DWG_PN_2_2 TE SEAL 1572316-1 C1__DWG_PN_3_0 C1__DWG_PN_3_1 1949110-1 C1__DWG_PN_3_2 - GWH/LEAR SEAL 16695.627.642 14448.627.621 - C1__DWG_PN_4_0 - C1__DWG_PN_4_1 - WIRE SIZE 1.00mm2 0.75mm2 0.50mm2 B CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 1.25+/-0.05 [.049+/-.002] 1.20+/-0.05 [.047+/-.002] 1.15+/-0.05 [.045+/-.002] 1 RECOMMENDED SPARE PARTS 2 GREASE BEARING SURFACES LIGHTLY CRIMP HEIGHT REFERENCE SETTING 5.0 W1__DWG_CRIMP_HT_2 5.5 W1__DWG_CRIMP_HT_3 - 9 4.4 W1__DWG_CRIMP_HT_1 - W1__FA_SETTING_1 - W1__FA_SETTING_2 - W1__FA_SETTING_3 - *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. 6 7 - APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: MECHANICAL FEED WITH "SMART APPLICATOR" CONVERSION: 8PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8SERVO FEED WITH "NON-CRIMP HEIGHT ADJUST": 8- 2266142 2266142 2266142 2266142 8 9 10 11 A 12 13 14 15 APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 62 FOR -6 ONLY APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 37 GREASE THREADS, GROOVE AND O-RING ON ITEMS 35 - -4 -4 -5 -6 - & 242. & 252. - TO CONVERT THE APPLICATOR TO A NON-CARRIER CUTTING STYLE, REMOVE ITEM 13 AND ATTACH TO THE LOCATION ON THE BACK SIDE OF THE HOUSING. REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. APPLY TORQ-SEAL IN ALLEN SOCKET TO FILL HOLE AFTER FLAT HD HAS BEEN ADJUSTED TO CORRECT HEIGHT AT QUALIFICATION. APPLY #1-23419-5 LOC-TITE TO THREADS. THIS APPLICATOR IS SPECIFIC FOR USE IN A STRIPPER SEAL TERMINATING UNIT. & 242. - SPARE FEED CAM STORAGE LOCATION REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. THIS APPLICATOR APPLIES TERMINAL WITH A SEAL. 1 - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. WHEN ASSEMBLING A NON CRIMP HEIGHT ADJUST APPLICATOR (-6) USE SHIMS FROM ITEM 260 TO ACHIEVE A NOMINAL SHIM HEIGHT OF - - MAGNET, ITEM 166 MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. AMP 4805 REV 31MAR2000 - 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 - 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 4 REVISIONS DIST A 66 P LTR - 1 1 1 1 1 -77 -7 1 1 1 1 -6 1 1 1 1 1 -5 1 1 1 1 1 1 1 1 -2 1 2119957-2 8-21084-0 2119640-1 2079988-1 2119641-1 2119798-1 1-22279-3 2119758-1 2119082-9 2079764-1 -1 PART NO 1 1 1 1 APPLICATOR SHIM PACK O-RING, .676 ID, .070 DIA. MAT. PUSH ROD, AIR FEED BUSHING, LCH5-12, MISUMI FEED CAM, AIR FEED DETENT PIN SPRING, COMPRESSION RAM, AMP STYLE, SIDE FEED, NON-ADJ. CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST DESCRIPTION 1 2119957-2 1 8-21084-0_GATD 1 2119640-1 1 2079988_GATD 1 2119641-1 1 2119798-1 1 1-22279-3_SIMP 1 2119758 1 2119082-9 1 2079764_APP 260 252 250 249 248 247 246 245 244 243 ITEM NO 1 1 1 1 - 1 1 1 1 - 1 REF 1 2 1 1 1 1 2 1 3 2 1 1 4 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 - - - - 2 1 A1 ECR-15-002160 11FEB2015 KS TE A2 ECR-21-004118 08APR2021 LG TE ATLANTIC VERSION mm MATERIAL - PART NO - 1 1 REF REF REF REF - - - 1 - - 1 - 1 1 1 1 1 1 -6 1 1 1 1 - 1 1 1 - - 1 1 1 - - 1 1 1 - 1 1 1 1 - 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 2 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 - 1 1 1 - 1 - 1 1 2 - - - 1 1 - 1 1 1 - - 1 1 1 - 2 1 1 - 4 2 1 1 1 4 2 1 1 1 4 1 1 1 - 2 1 1 1 4 2 1 - - 3 2 1 1 1 3 2 - 2 1 3 1 1 2 1 2 1 1 2 - 1 1 - - 1 1 1 2 2 1 1 - - 2 1 1 1 - 2 1 - 1 REF REF 1 - - 1 2 - - 1 1 - 1 REF REF 1 - 1 1 -5 -2 TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 SHCS, LOW HEAD, RoHS, M5 X 16 MECHANICAL FEED ASSEMBLY AIR FEED MODULE TAG,IDENTIFICATION SPACER, FEEDER RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER PIN, RETAIN, GRVD, 3/16 X .854 HOLDER,FEED FINGER, AF MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM WASHER, FLAT, REG M4 FEED FINGER ASSEMBLY,SF SCR, SKT HD CAP, RoHS, M3 X 8.0 FRONT STRIP GUIDE SPACER, CRIMPER DOCUMENTATION PACKAGE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE PNT, M3 x 4.0 SPRING, COMPRESSION SCR, BHSC, RoHS (M4 X 8) SCR, HEX HD CAP, M4 X 6.0 SCR, FLT SKT HD CAP M3 X 10.0 PAWL, FEED SHCS, LOW HEAD, RoHS, M4 X 12 SCR, SKT HD CAP, RoHS, M4 X 10 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM, AMP STYLE, SIDE FEED SCR, BHSC, RoHS (M8 X 25) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION FA HEAD, ATLANTIC STYLE BOLT, ADJUSTMENT SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) HEX HEAD, FLANGED, M5 x 8mm LONG SPACER, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER SCR, SET, FLT PNT, M5 X 20.0 LEVER, DRAG RELEASE DRAG, TERMINAL STRIP GUIDE SCR, SKT HD SHLDR 5.0 DIA X 6.0 SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O PREMIUM SPACER, CRIMPER CRIMPER, WIRE DWN 06NOV2013 CHK 06NOV2013 APVD 06NOV2013 Y.YIN G.BAILEY U.GUO NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 2 2168400-6 1 2119580-1 1 2063440-1 1 2119740-2 .. 1 1901094-3 2 21045-3 1 994969-1_GATD 1 COUNTER_994970 1 240638 1 3-23627-7 1 2119799 1 1901689_EMPTY_OCEAN_SF .. 1 1633743-1 1 1-18028-2 1 2119944-1 2 2168083-1 1 1-690438-0 1 455888-5 1 2119956-1 1 2119740-1 2 2168078-1 1 2119793 3 992763-5 2 SIMP_22281-8 1 2079383-4 1 5-18022-5 1 985575-3 1 1338685-1 4 2168400-1 2 1-2168083-0 1 5018030-1 1 811242-5_OLD 1 690753-2 3 18023-9 1 2119652 1 2119653 1 2-2119656-1 1 2119370 1 2079383-7 1 2119645 1 2119957-1 1 2119644-1 1 2119085_PRE_REV_K 1 2119092-1 1 1752356-3 2 2079383-5 1 2161328 1 1-1320908-2 1 2119959-3 1 455888-3 2 2-18032-5 1 356835-1 1 240792-1 1 1320928-2 1 980371-4 1 2168083-2 1 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 318707-1 1 6-1633138-5 .. 1 ITEM_7 .. 1 ITEM_6 1 2119781-1 1 238011-4 1 2-2119784-9 1 1-455888-3 1 2-1633738-8 242 241 240 239 238 213 198 172 166 164 163 137 136 135 133 119 117 97 96 82 71 67 66 63 62 61 60 59 57 56 54 53 52 51 50 49 48 47 46 44 41 40 39 38 37 35 34 33 32 30 29 28 27 26 25 24 23 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 7-18023-7 TE Connectivity APPLICATION SPEC - 1 2119083 DESCRIPTION PRODUCT SPEC - APVD UG -1 - DWN YY 1 - - - 1 - - 1 - 1 1 1 1 - - - 1 1 DATE 17DEC2013 2119083-1 7-18023-7 2168400-6 2119580-1 2063440-1 2119740-2 1901094-3 21045-3 994969-1 994970-2 240638-1 3-23627-7 2119799-1 SEE NOTE 4 1633743-1 1-18028-2 2119944-1 2168083-1 1-690438-0 455888-5 2119956-1 2119740-1 2168078-1 2119793-1 992763-5 22281-8 2079383-4 5-18022-5 985575-3 1338685-1 2168400-1 1-2168083-0 5018030-1 811242-5 690753-2 18023-9 2119652-1 2119653-1 2-2119656-1 2119370-1 2079383-7 2119645-1 2119957-1 2119644-1 2119085-1 2119092-1 1752356-3 2079383-5 2161328-1 1-1320908-2 2119959-3 455888-3 2-18032-5 356835-1 240792-1 1320928-2 980371-4 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 318707-1 6-1633138-5 2119781-1 238011-4 2-2119784-9 1-455888-3 2-1633738-8 1 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: & 4 of 4) 1 -77 -7 4.55 . Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 - 1 DESCRIPTION RELEASED A MECHANICAL FINE CRIMP HEIGHT ADJUST A 1 FEED TYPE FINE CRIMP HEIGHT ADJUST A LOC SET UP GAUGE 2119599-1 ALL RIGHTS RESERVED. PART NUMBER D 6 Ocean Side Feed Applicator - DRAWING NO 2266142 SCALE 1:2 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV A2 D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION SEE SHEET 1 - FEED TYPE MECHANICAL D 5 247 38 59 246 39 56 260 53 166 238 2 8 242 2 57 REF 2 SHEAR DEPRESSOR DETAIL 2 6 8 82 1 136 34 REF C 2 3 52 1 56 240 4 TERMINAL SUPPORT LOCATION 28 5 41 135 198 66 2 11 164 A 67 57 213 33 A 24 SERVO FEEDER NOT INCLUDED B 4 51 133 0.00 0.50 [ 0.000 0.019 ] REF 1 137 SERVO LATCH PLATE D 1.14 [ 0.045 ] 50 172 REF 2 244 59 C 117 REF 10 19 30 20 97 21 B 96 9 29 12 1 ITEM 30 LOCATED AT REAR HOLES 241 CAM POSITIONS 13 47 30 REF 1 29 REF 11 11 30mm STROKE 30mm STROKE 30mm STROKE - 243 63 163 245 35 7 249 A 44 7 252 2 - - 40 239 250 APVD 62 6 PNEUMATIC DWN 37 6 A DATE 119 61 25 27 26 23 46 32 34 54 8 1 60 54 10 1 FEED TRACK POSITION GUIDE BY WIRE BARREL 248 48 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 40mm STROKE MECHANICAL POST FEED AMP 4805 REV 31MAR2000 49 40mm STROKE MECHANICAL PRE FEED 49 40mm STROKE AIR FEED DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 06NOV2013 CHK 06NOV2013 APVD 06NOV2013 Y.YIN G.BAILEY U.GUO TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2266142 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV A2 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 6 5 4 3 2 20 SET UP GAUGE 2119599-1 ALL RIGHTS RESERVED. PART NUMBER REVISION 2- 2266142 -1 DESCRIPTION FEED TYPE FINE CRIMP HEIGHT ADJUST MECHANICAL A FINE CRIMP HEIGHT ADJUST OBSOLETE 2- 2266142 -5 2- 2266142 -7 D A 7- 2266142 -7 A PNEUMATIC FINE CRIMP HEIGHT ADJUST SERVO LATCH PLATE FINE CRIMP HEIGHT ADJUST NONE CRIMP TOOLING KIT - OBSOLETE - 4 - OBSOLETE - - OBSOLETE - - - CRIMP WIRE INSUL APPLICATOR DATA SIZE - TYPE - F O 2.00 mm [.079] 3.94 mm [.155] APPLICATOR INSTRUCTIONS 408-10389 - MFR TERMINAL TERMINAL DATA: WIRE STRIP LENGTH n 4.20-4.80 mm [.165-.189 IN] C TERMINAL APPLICATION SPECIFICATION - LEAR CRIMP SPECIFICATION TERMINAL TERMINAL NAME: LEAR SPEC Rev 1 - - INSULATION DIAMETER RANGE - 1.20-2.10 mm [.047-.083 IN] - - - - - TERMINALS APPLIED TE TERMINAL 1949751-1 1949751-2 GWH/LEAR TERMINAL C1__DWG_PN_1_0 26806.201.184 7815102 C1__DWG_PN_1_1 C1__DWG_PN_1_2 C1__DWG_PN_2_0 C1__DWG_PN_2_1 C1__DWG_PN_2_2 TE SEAL C1__DWG_PN_3_0 1572316-1 1949110-1 C1__DWG_PN_3_1 C1__DWG_PN_3_2 GWH/LEAR SEAL - - 6 C1__DWG_PN_4_0 16695.627.642 14448.627.621 - C1__DWG_PN_4_1 - WIRE SIZE 1.00mm2 0.75mm2 0.50mm2 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 1.25+/-0.05 [.049+/-.002] 1.20+/-0.05 [.047+/-.002] 1.15+/-0.05 [.045+/-.002] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 4.4 5.0 5.5 - 9 - W1__FA_SETTING_1 - W1__FA_SETTING_2 - W1__FA_SETTING_3 - 1 B 2 - *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. RECOMMENDED SPARE PARTS - GREASE BEARING SURFACES LIGHTLY - 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 4 - APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: MECHANICAL FEED WITH "SMART APPLICATOR" CONVERSION: 8PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8- - 2266142 -4 2266142 -4 2266142 -5 - 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 62 7 GREASE THREADS, GROOVE AND O-RING ON ITEMS 139 8 9 10 11 A 12 13 14 - - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. TO CONVERT THE APPLICATOR TO A NON-CARRIER CUTTING STYLE, REMOVE ITEM 13 AND ATTACH TO THE LOCATION ON BACK SIDE OF THE HOUSING. REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. THIS APPLICATOR APPLIES TERMINAL WITH A SEAL. APPLY TORQ-SEAL IN ALLEN SOCKET TO FILL HOLE AFTER FLAT HD HAS BEEN ADJUSTED TO CORRECT HEIGHT AT QUALIFICATION. APPLY #1-23419-5 LOC-TITE TO THREADS. THIS APPLICATOR IS SPECIFIC FOR USE IN A STRIPPER SEAL TERMINATING UNIT. - 1 & 152. SPARE FEED CAM STORAGE LOCATION REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. - & 242. MAGNET MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. AMP 4805 REV 31MAR2000 - 1 6 REVISIONS DIST A 66 P LTR - - 2- 2266142 -2 LOC 1 6 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -77 -27 -25 -22 -21 2119782-1 2119640-1 2079988-1 1-22279-3 2119082-9 2079764-1 2119083-1 7-18023-7 PART NO FINE ADJUST HEAD ASM, PACIFIC STYLE PUSH ROD, AIR FEED BUSHING, LCH5-12, MISUMI SPRING, COMPRESSION CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 DESCRIPTION 1 2119782 1 2119640-1 1 2079988_GATD 1 1-22279-3_SIMP 1 2119082-9 1 2079764_APP 1 2119083 1 7-18023-7 251 250 249 246 244 243 242 241 1 1 - 1 1 1 1 - - - - - - - - 1 1 - - 2 1 REF - - - 1 - - 1 - 1 - 1 1 REF REF REF - - 1 1 1 - 1 - 1 1 1 1 1 1 1 1 1 - 1 1 1 - - 1 1 1 - - 1 1 1 - - 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 - 1 1 1 1 - 1 1 1 - - 1 1 1 - 2 1 1 1 1 2 1 1 1 1 2 1 1 1 - 2 2 1 1 - 3 2 - 1 1 3 2 - 2 1 3 2 1 2 1 3 1 1 2 1 1 1 - 2 1 1 1 1 2 1 1 1 - 2 1 1 1 - 2 1 - 1 REF 2 - - 1 - - - 1 1 - 1 REF - 1 1 - - 1 1 - - 1 1 1 - 1 1 1 1 4 - 1 1 1 4 - 1 1 1 4 - - 1 1 4 1 1 1 1 - 1 1 1 1 1 1 mm MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 06NOV2013 CHK 06NOV2013 APVD 06NOV2013 G.BAILEY U.GUO NAME A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 1 2063440-1 1 2119740-2 .. 1 1901094-3 2 21045-3 1 994969-1_GATD 1 COUNTER_994970 1 240638 1 8-21084-1_GATD 1 2119641-2 1 2119798-2 1 2079383-8 4 2168400-5 1 2119653-2 1 2-2119656-2 1 2119650 1 2119092-2 1 3-23627-7 1 2119799 1 1901689_EMPTY_OCEAN_SF .. 1 1633743-1 1 1-18028-2 1 2119944-1 2 2168083-1 1 1-690438-0 1 455888-5 1 2119956-1 1 2119740-1 2 2168078-1 1 2119793 3 992763-5 2 SIMP_22281-8 1 5-18022-5 1 985575-3 1 1338685-1 2 1-2168083-0 1 5018030-1 1 811242-5_OLD 1 690753-2 3 18023-9 1 2119652 1 2079383-7 1 2119645 1 2119957-1 1 2119644-1 1 1752356-3 2 2079383-5 1 2161328 1 1-1320908-2 1 2119959-3 1 455888-3 2 2-18032-5 1 356835-1 1 240792-1 1 1320928-2 1 980371-4 1 2168083-2 1 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 318707-1 1 6-1633138-5 .. 1 ITEM_7 .. 1 ITEM_6 1 2119781-1 1 238011-4 1 2-2119784-9 1 1-455888-3 1 2-1633738-8 240 239 238 213 198 172 166 164 163 152 151 145 144 143 142 141 140 139 137 136 135 133 119 117 97 96 82 71 67 66 63 62 61 59 57 56 53 52 51 50 49 48 41 40 39 38 34 33 32 30 29 28 27 26 25 24 23 21 20 19 13 12 11 10 9 8 7 6 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 SIZE - 1 2119580-1 TE Connectivity - WEIGHT - 2 2168400-6 DESCRIPTION APPLICATION SPEC - APVD - SHCS, LOW HEAD, RoHS, M5 X 16 MECHANICAL FEED ASSEMBLY AIR FEED MODULE TAG,IDENTIFICATION SPACER, FEEDER RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER O-RING, .801 ID, .070 DIA. MAT. FEED CAM, AIR FEED DETENT PIN SCR, BHSC, RoHS (M4 X 16) SHCS, LOW HEAD, RoHS, M4 X 20 FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM, ASIAN STYLE, SIDE FEED BOLT, ADJUSTMENT PIN, RETAIN, GRVD, 3/16 X .854 HOLDER,FEED FINGER, AF MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM WASHER, FLAT, REG M4 FEED FINGER ASSEMBLY,SF SCR, SKT HD CAP, RoHS, M3 X 8.0 FRONT STRIP GUIDE SPACER, CRIMPER DOCUMENTATION PACKAGE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE PNT, M3 x 4.0 SPRING, COMPRESSION SCR, HEX HD CAP, M4 X 6.0 SCR, FLT SKT HD CAP M3 X 10.0 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 10 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED SCR, BHSC, RoHS (M8 X 25) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) HEX HEAD, FLANGED, M5 x 8mm LONG SPACER, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER SCR, SET, FLT PNT, M5 X 20.0 LEVER, DRAG RELEASE DRAG, TERMINAL STRIP GUIDE SCR, SKT HD SHLDR 5.0 DIA X 6.0 SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION O PREMIUM SPACER, CRIMPER CRIMPER, WIRE PRODUCT SPEC - DWN - PART NO Y.YIN DATE SEE SHEET 1 2168400-6 2119580-1 2063440-1 2119740-2 1901094-3 21045-3 994969-1 994970-2 240638-1 8-21084-1 2119641-2 2119798-2 2079383-8 2168400-5 2119653-2 2-2119656-2 2119650-1 2119092-2 3-23627-7 2119799-1 SEE NOTE 4 1633743-1 1-18028-2 2119944-1 2168083-1 1-690438-0 455888-5 2119956-1 2119740-1 2168078-1 2119793-1 992763-5 22281-8 5-18022-5 985575-3 1338685-1 1-2168083-0 5018030-1 811242-5 690753-2 18023-9 2119652-1 2079383-7 2119645-1 2119957-1 2119644-1 1752356-3 2079383-5 2161328-1 1-1320908-2 2119959-3 455888-3 2-18032-5 356835-1 240792-1 1320928-2 980371-4 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 318707-1 6-1633138-5 2119781-1 238011-4 2-2119784-9 1-455888-3 2-1633738-8 - THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: & 2 of 4) 2 -77 -27 -25 -22 -21 ITEM NO PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 - 1 - DESCRIPTION Ocean Side Feed Applicator - DRAWING NO 2266142 SCALE 1:2 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV A2 D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 20 6 1 REVISIONS DIST 66 P LTR DESCRIPTION SEE SHEET 1 - FEED TYPE - - - 40 145 38 239 246 39 59 7 56 140 152 REF 5 2 2 D 1.14 [ 0.045 ] 2 57 244 7 139 REF SHEAR DEPRESSOR DETAIL 243 PNEUMATIC 250 53 2 8 249 A 166 242 2 6 0.00 0.50 [ 0.000 0.019 ] 63 238 163 REF 8 50 34 59 82 136 1 137 C 1 56 REF TERMINAL SUPPORT LOCATION 52 172 2 3 51 C 1 4 28 SERVO LATCH PLATE 5 41 240 133 4 135 198 164 66 2 11 57 67 A 33 SERVO FEEDER NOT INCLUDED 19 10 30 117 REF 213 A 24 20 21 97 B 9 1 12 96 241 29 13 1 ITEM 30 LOCATED AT REAR HOLES 11 CAM POSITIONS 30mm STROKE APVD 62 6 A B DWN 251 MECHANICAL D DATE 30 REF 29 30mm STROKE 30mm STROKE 142 REF 61 151 25 27 26 23 141 32 34 143 8 1 144 143 10 1 119 11 FEED TRACK POSITION GUIDE BY WIRE BARREL 48 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION 49 MECHANICAL POST FEED 49 MECHANICAL PRE FEED 49 AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 06NOV2013 CHK 06NOV2013 APVD 06NOV2013 Y.YIN G.BAILEY U.GUO TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2266142 SCALE 1:2 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV A2
8-2266142-5 价格&库存

很抱歉,暂时无法提供与“8-2266142-5”相匹配的价格&库存,您可以联系我们找货

免费人工找货