8-2266164-4

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION PART NUMBER REVISION 2266164 -2 D 7-2266164-2 D 7- 2266164 -7 C 5 4 3 2 20 LOC ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 20 6 DESCRIPTION FEED TYPE FINE CRIMP HEIGHT ADJUST REVISIONS DIST A ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR PNEUMATIC PNEUMATIC AND CRIMP TOOLING KIT DESCRIPTION DATE DWN APVD A RELEASED 22JAN2014 KH UG B ECR-14-003389 06MAR2014 YY UG C ECR-17-005877 25APR2017 TB CT D ECR-19-015907 12OCT2019 FZ TE PNEUMATIC CRIMP TOOLING KIT - D D APPLICATOR DATA CRIMP SIZE WIRE INSUL TYPE F OV 5.50 mm [.217] 6.90 mm [.272] APPLICATOR INSTRUCTIONS 408-35042 - 1 - 1 - TE TERMINAL TERMINAL DATA: WIRE STRIP LENGTH 7.00-7.00 mm [.276-.276 IN] C TERMINAL APPLICATION SPECIFICATION Proner Comatel 2398 C 002 - TERMINALS APPLIED TE TERMINAL 1544228-1 n - - - - n 7.00-7.00 mm [.276-.276 IN] 4.90-6.00 mm [.193-.236 IN] TERMINAL APPLICATION SPECIFICATION 8 - - - - - C1__DWG_PN_2_0 TE SEAL C1__DWG_PN_3_0 TE SEAL C1__DWG_PN_4_0 TE TERMINAL 1544228-1 C1__DWG_PN_1_1 1 C2__DWG_PN_2_0 TE SEAL C2__DWG_PN_3_0 - 10.18mm2 W1__DWG_WGAUGE_1 10.05mm2 W1__DWG_CRIMP_HT_1 3.18+/-0.05 [.125+/-.002] 5.5 W1__FA_SETTING_1 10.00mm2 CRIMP HEIGHT mm [INCH] W2__DWG_WGAUGE_1 3.52+/-0.05 [.139+/-.002] CRIMP HEIGHT REFERENCE SETTING W2__DWG_CRIMP_HT_1 5.5 4 W1__DWG_CRIMP_HT_3 8.7 - 4 6 7 8 RECOMMENDED THAT THE CUSTOMER PERFORM FURTHER DETAILED EVALUATION TO PERFORMANCE IN THE SPECIFIC APPLICATION. 1 1 1 1 1 1 1 1 1 1 - 1 1 1 1 2 - 1 - - - - - - 1 - 1 1 1 2 - A 1 1 - 1 1 1 - 1 2 1 - 1 1 2 - 1 1 1 - ASSESS PRODUCT 2 1 - WARRANTIES THAT THE PRODUCT WILL PERFORM SIMILARLY TO VALIDATED AND APPROVED APPLICATIONS, AS STATED WITHIN TE CONNECTIVITY APPLICATION SPECIFICATIONS, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. AS SUCH, IT IS HIGHLY 2 2 - 1 1 2 - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 1 - 1 1 1 - THIS CRIMP PARAMETER IS PROVIDED TO MEET A CUSTOM AND UNIQUE CUSTOMER REQUIREMENT. IT HAS BEEN EVALUATED AND IS CONDITIONALLY SPECIFIED BY TE CONNECTIVITY. THIS CUSTOMIZED CRIMP PARAMETER IS NOT LISTED AS AN APPROVED APPLICATION WITHIN A TE CONNECTIVITY APPLICATION SPECIFICATION. TE CONNECTIVITY EXPRESSLY DISCLAIMS ANY AND ALL 1 1 - 1 1 1 - TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. 1 1 - WIRE SIZE OVER 10mm2 IS NOT RECOMMENDED, PLS CHECK PRESS COMPATIBILITY OF TERMINATOR. 1 1 - 5. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 1 1 - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 2 1 - APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 4 2 - 3 1 4 - B 1 1 - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 1 1 - 2 2 1 - RECOMMENDED SPARE PARTS 1 2 - 1 1 1 - W1__FA_SETTING_2 1 1 W2__FA_SETTING_1 1 1 - 8.5 3.20+/-0.05 [.126+/-.002] W1__DWG_WGAUGE_3 WIRE SIZE 4 5.5 3.52+/-0.05 [.139+/-.002] 7.42mm2 7.26mm2 3.52+/-0.05 [.139+/-.002] CRIMP HEIGHT REFERENCE SETTING 1 1 6 2 1 - CRIMP HEIGHT mm [INCH] 1 2 - WIRE SIZE 1 1 - C2__DWG_PN_1_1 1 1 - C2__DWG_PN_4_0 1 1 - TE SEAL 1 1 TE TERMINAL C2__DWG_PN_1_0 1 REF REF - - 1 1 - 4.90-6.00 mm [.193-.236 IN] 1 1 - INSULATION DIAMETER RANGE 1 1 - 3 TERMINALS APPLIED 7 TE TERMINAL C1__DWG_PN_1_0 WIRE STRIP LENGTH INSULATION DIAMETER RANGE TE CRIMP SPECIFICATION CLIP 8 mm NG1 CAPACITE 7 A 10 mm2 TERMINAL NAME: CLIP 8 mm NG1 CAPACITE 7 A 10 mm2 TERMINAL NAME: TE TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION 1 1 - 455888-1 2119641-1 2119082-7 2079764-1 2119083-1 2844940-2 994970-2 1-18028-2 2844908-1 2844907-1 1-690438-0 455888-5 1-2079383-8 1803096-1 1803607-3 2119791-5 2119943-1 2119740-1 2168078-1 2168083-2 5-18022-5 1-1338683-1 2168083-3 1-2168083-0 5018030-1 811242-5 690753-2 18023-9 1-1803583-7 1803515-2 1803602-2 1752356-2 2079383-5 2-2844962-6 2844992-5 455888-3 22281-8 240792-1 1320928-6 2168083-2 1-18028-2 2119533-1 3-22280-3 1-356885-3 1-2119805-2 1-318059-0 7-1633930-7 1803080-1 4-238011-4 1803462-1 1-455888-2 8-1490019-3 1 1 1 1 2 1 -77 -72 -2 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 AMP 4805 REV 31MAR2000 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: PART NO DWN 29NOV2013 CHK 29NOV2013 APVD 29NOV2013 K.HUANG L.ZHANG U.GUO - WEIGHT NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 1 2119082-7 1 2079764 1 2119083 1 2844940-2 1 COUNTER_994970 1 1-18028-2 1 2844908 1 2844907 1 1-690438-0 1 455888-5 2 1-2079383-8 1 1803096 1 1803607_3 1 2119791-5 1 2119943-1 1 2119740-1 2 2168078-1 1 2168083-2 1 5-18022-5 1 1-1338683-1 4 2168083-3 2 1-2168083-0 1 5018030-1 1 811242-5_OLD 1 690753-2 1 18023-9 1 1-1803583-7 1 1803515-2 1 1803602-2 1 1752356-2 2 2079383-5 2 2-2844962-6 1 2844992-5 1 455888-3 2 SIMP_22281-8 1 240792-1 1 1320928-6 1 2168083-2 1 1-18028-2 1 2119533 1 SIMP_3-22280-3 1 1-356885-3 1 1-2119805-2 1 1-318059-0 1 7-1633930-7 .. 1 ITEM_7 .. 1 ITEM_6 1 1803080-1 1 4-238011-4 1 1803462-1 1 1-455888-2 1 8-1490019-3 261 248 244 243 242 238 164 119 99 98 96 82 79 78 71 70 69 67 66 60 59 56 54 53 52 51 50 49 46 44 41 34 33 30 29 28 27 25 24 21 20 19 12 11 10 9 8 7 6 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 - 1 2119641-1 TE Connectivity APPLICATION SPEC - 1 455888-1 DESCRIPTION PRODUCT SPEC 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH SPACER, CRIMPER FEED CAM, AIR FEED CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL AIR FEED MODULE COUNTER, MAGNETIC WASHER, FLAT, REG M4 SCREW, LOCKING POST, LOCKING FRONT STRIP GUIDE SPACER, CRIMPER SCR, BHSC, RoHS (M4 X 6) EXTENSION PLATE DOCUMENTATION PACKAGE DEPRESSOR, WIRE WASHER, SPACER TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SKT HD CAP, RoHS, M4 X 8.0 SCR, HEX HD CAP, M4 X 6.0 FEED PAWL SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP, RoHS, M4 X 10 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF ATLANTIC SCR, BHSC, RoHS (M8 X 40) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER SPRING, COMPRESSION DRAG, TERMINAL STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION OVERLAP PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM Ocean Side Feed Applicator - DRAWING NO 2266164 SCALE 1:2 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR - D DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - D FEED TYPE 44 PNEUMATIC 2 244 53 A 243 242 238 2 3 3.0 50 82 59 C 8 1 SEE DETAIL A 1 261 69 REF 34 REF 70 C 2 52 3 1 51 56 0.5 4 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) TERMINAL SUPPORT LOCATION 28 5 41 44 42.67 REF 0.05 66 DETAIL A 2 164 67 33 A 24 30 B RAM SET-UP 19 B 20 79 21 78 96 9 29 1 ITEM 30 LOCATED AT FRONT HOLES 12 27 CAM POSITION 30 REF 29 REF 25 11 30mm STROKE 119 46 98 99 34 54 8 1 60 54 10 1 FEED TRACK POSITION GUIDE BY INSULATION BARREL 248 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 40mm STROKE AIR FEED AMP 4805 REV 31MAR2000 DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 29NOV2013 CHK 29NOV2013 APVD 29NOV2013 K.HUANG L.ZHANG U.GUO TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH DWN - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2266164 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV D 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 4 3 2 20 LOC ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 5 PART NUMBER REVISION DESCRIPTION FEED TYPE 2- 2266164 -2 D FINE CRIMP HEIGHT ADJUST PNEUMATIC 7- 2266164 -7 C CRIMP TOOLING KIT - REVISIONS DIST A PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - D D APPLICATOR DATA CRIMP SIZE WIRE INSUL TYPE F OV 5.50 mm [.217] 6.90 mm [.272] APPLICATOR INSTRUCTIONS 408-35042 - TE TERMINAL TERMINAL DATA: WIRE STRIP LENGTH 7.00-7.00 mm [.276-.276 IN] C TERMINAL APPLICATION SPECIFICATION Proner Comatel 2398 C 002 - TERMINALS APPLIED TE TERMINAL 1544228-1 n - - - - TE CRIMP SPECIFICATION n 7.00-7.00 mm [.276-.276 IN] 4.90-6.00 mm [.193-.236 IN] TERMINAL APPLICATION SPECIFICATION 8 - - C1__DWG_PN_2_0 TE SEAL TE SEAL C1__DWG_PN_3_0 C1__DWG_PN_4_0 C1__DWG_PN_1_1 TE TERMINAL 1544228-1 REF - 1 - 1 - 4 - 1 - 1 TE TERMINAL C2__DWG_PN_1_0 1 - 4.90-6.00 mm [.193-.236 IN] - 1 - INSULATION DIAMETER RANGE - 1 - 3 TERMINALS APPLIED 7 TE TERMINAL C1__DWG_PN_1_0 WIRE STRIP LENGTH INSULATION DIAMETER RANGE 1 - CLIP 8 mm NG1 CAPACITE 7 A 10 mm2 TERMINAL NAME: CLIP 8 mm NG1 CAPACITE 7 A 10 mm2 TERMINAL NAME: TE TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION TE SEAL C2__DWG_PN_2_0 C2__DWG_PN_3_0 TE SEAL 1 - C2__DWG_PN_4_0 1 - C2__DWG_PN_1_1 1 - 1 - 1 - WIRE SIZE CRIMP HEIGHT W1__CRIMP_UNITS:2 6 10.18mm2 W1__DWG_WGAUGE_1 10.05mm2 W1__DWG_CRIMP_HT_1 3.18+/-0.05 [.125+/-.002] W1__FA_SETTING_1 10.00mm2 CRIMP HEIGHT mm [INCH] W2__DWG_WGAUGE_1 3.52+/-0.05 [.139+/-.002] CRIMP HEIGHT REFERENCE SETTING W2__DWG_CRIMP_HT_1 5.5 W1__DWG_CRIMP_HT_3 8.7 2 - 4 1 - 1 - 1 - W2__FA_SETTING_1 1 - 8.5 3.20+/-0.05 [.126+/-.002] W1__DWG_WGAUGE_3 5.5 WIRE SIZE 4 5.5 3.52+/-0.05 [.139+/-.002] 7.42mm2 7.26mm2 3.52+/-0.05 [.139+/-.002] CRIMP HEIGHT REFERENCE SETTING 1 - W1__FA_SETTING_2 2 - 1 - 1 - 2 - 1 - 1 - 1 - 1 - 1 B 1 2 3 4 7 8 REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 1 - 1 - APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 2 - 1 - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 1 - 1 - 1 - 1 - WIRE SIZE OVER 10mm2 IS NOT RECOMMENDED, PLS CHECK PRESS COMPATIBILITY OF TERMINATOR. TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. THIS CRIMP PARAMETER IS PROVIDED TO MEET A CUSTOM AND UNIQUE CUSTOMER REQUIREMENT. IT HAS BEEN EVALUATED AND IS CONDITIONALLY SPECIFIED BY TE CONNECTIVITY. THIS CUSTOMIZED CRIMP PARAMETER IS NOT LISTED AS AN APPROVED APPLICATION WITHIN A TE TE CONNECTIVITY EXPRESSLY DISCLAIMS ANY AND ALL CONNECTIVITY APPLICATION SPECIFICATION. RECOMMENDED THAT THE CUSTOMER PERFORM FURTHER DETAILED EVALUATION TO PERFORMANCE IN THE SPECIFIC APPLICATION. 2 - 1 - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING, REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 - 1 1 - 1 1 1 1 1 - - - - - 1 - WARRANTIES THAT THE PRODUCT WILL PERFORM SIMILARLY TO VALIDATED AND APPROVED APPLICATIONS, AS STATED WITHIN TE CONNECTIVITY APPLICATION SPECIFICATIONS, INCLUDING BUT NOT LIMITED TO IMPLIED AS SUCH, IT IS HIGHLY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. A 2 - 5. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 6 1 - RECOMMENDED SPARE PARTS ASSESS PRODUCT 1 1 1 1 1 1 - 1 1 DIMENSIONS: PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: DWN 29NOV2013 CHK 29NOV2013 APVD 29NOV2013 K.HUANG L.ZHANG U.GUO - WEIGHT NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 1 2079764 1 2119083 1 2844940-2 1 COUNTER_994970 1 2119641-2 1 2168083-8 4 2168083-9 1 1-1803583-8 1 1803516-2 1 1-18028-2 1 2844908 1 2844907 1 1-690438-0 1 455888-5 2 1-2079383-8 1 1803096 1 1803607_3 1 2119791-5 1 2119943-1 1 2119740-1 2 2168078-1 1 5-18022-5 1 1-1338683-1 2 1-2168083-0 1 5018030-1 1 811242-5_OLD 1 690753-2 3 18023-9 1 1803602-2 1 1752356-2 2 2079383-5 2 2-2844962-6 1 2844992-5 1 455888-3 2 SIMP_22281-8 1 240792-1 1 1320928-6 1 2168083-2 1 1-18028-2 1 2119533 1 SIMP_3-22280-3 1 1-356885-3 1 1-2119805-2 1 1-318059-0 1 7-1633930-7 .. 1 ITEM_7 .. 1 ITEM_6 1 1803080-1 1 4-238011-4 1 1803462-1 1 1-455888-2 1 8-1490019-3 261 244 243 242 238 164 151 144 143 141 140 119 99 98 96 82 79 78 71 70 69 67 66 59 56 53 52 51 50 49 41 34 33 30 29 28 27 25 24 21 20 19 12 11 10 9 8 7 6 5 4 3 2 1 ITEM NO Harrisburg, PA 17105-3608 - 1 2119082-7 TE Connectivity APPLICATION SPEC - 1 455888-1 DESCRIPTION PRODUCT SPEC 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH SPACER, CRIMPER CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL AIR FEED MODULE COUNTER, MAGNETIC FEED CAM, AIR FEED SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP, RoHS, M4 X 20 APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF PACIFIC WASHER, FLAT, REG M4 SCREW, LOCKING POST, LOCKING FRONT STRIP GUIDE SPACER, CRIMPER SCR, BHSC, RoHS (M4 X 6) EXTENSION PLATE DOCUMENTATION PACKAGE DEPRESSOR, WIRE WASHER, SPACER TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, HEX HD CAP, M4 X 6.0 FEED PAWL SCR, SKT HD CAP, RoHS, M4 X 10 NUT, HEX, REG, RoHS, M3 BUMPER, HOLD DOWN SPACER, TONKER SCR, SKT HD CAP M4 X 6.0 SCR, BHSC, RoHS (M8 X 40) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER SPRING, COMPRESSION DRAG, TERMINAL STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION OVERLAP PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM PART NO -77 -22 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. AMP 4805 REV 31MAR2000 455888-1 2119082-7 2079764-1 2119083-1 2844940-2 994970-2 2119641-2 2168083-8 2168083-9 1-1803583-8 1803516-2 1-18028-2 2844908-1 2844907-1 1-690438-0 455888-5 1-2079383-8 1803096-1 1803607-3 2119791-5 2119943-1 2119740-1 2168078-1 5-18022-5 1-1338683-1 1-2168083-0 5018030-1 811242-5 690753-2 18023-9 1803602-2 1752356-2 2079383-5 2-2844962-6 2844992-5 455888-3 22281-8 240792-1 1320928-6 2168083-2 1-18028-2 2119533-1 3-22280-3 1-356885-3 1-2119805-2 1-318059-0 7-1633930-7 1803080-1 4-238011-4 1803462-1 1-455888-2 8-1490019-3 1 Ocean Side Feed Applicator - DRAWING NO 2266164 SCALE 1:2 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION SEE SHEET 1 - D 140 FEED TYPE DWN APVD - - - D 2 244 PNEUMATIC 243 53 A 238 242 2 3 8 50 3.0 REF 34 59 82 1 52 C DATE 1 261 C 69 70 51 2 3 1 4 28 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 5 41 140 33.64 164 REF TERMINAL SUPPORT LOCATION SEE DETAIL A 56 0.5 REF 0.05 66 DETAIL A 2 67 33 24 RAM SET-UP A 30 19 20 B B 79 21 78 9 96 1 12 ITEM 30 LOCATED AT FRONT HOLES 29 CAM POSITION 27 REF 29 25 30 REF 30mm STROKE 151 141 98 99 34 143 8 1 144 143 10 1 119 11 FEED TRACK POSITION GUIDE BY INSULATION BARREL A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 AIR FEED PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 29NOV2013 CHK 29NOV2013 APVD 29NOV2013 K.HUANG L.ZHANG U.GUO TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH DWN - APPLICATION SPEC - - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2266164 SCALE 1:2 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV D