8-2266309-5

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 PART NUMBER RELEASED FOR PUBLICATION 6 REVISION DESCRIPTION FEED TYPE D FINE CRIMP HEIGHT ADJUST MECHANICAL 7-2266309-1 D MECHANICAL AND CRIMP TOOLING KIT MECHANICAL 7-2266309-2 D 7- 2266309 -7 A D 3 2 LOC 2266309 -1 2266309 -2 4 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 5 FINE CRIMP HEIGHT ADJUST REVISIONS DIST A ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR PNEUMATIC PNEUMATIC AND CRIMP TOOLING KIT DESCRIPTION DATE DWN APVD C1 ECR-19-010820 10JUL2019 TB TE C2 ECR-19-014494 17SEP2019 MZ RK D ECR-22-138884 12MAY2022 JWC ROY D1 ECR-22-140055 23MAY2022 JWC TE PNEUMATIC CRIMP TOOLING KIT - D D CRIMP WIRE INSUL APPLICATOR DATA SIZE 2.29 mm [.090] TYPE 2.45 mm [.096] APPLICATOR INSTRUCTIONS 408-35042 F F - TE TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION WIRE STRIP LENGTH - 3 .070 SERIES RECEPTACLE CONTACT TERMINAL NAME: - INSULATION DIAMETER RANGE 3.50-4.50 mm [.138-.177 IN] C - TERMINAL APPLICATION SPECIFICATION - 2.00-2.60 mm [.079-.102 IN] (A)114-5092 - (B)114-5092-3 - - - - - - TERMINALS APPLIED TE TERMINAL (A) 173645-1 (A) 173645-5 TE TERMINAL (A) 173645-2 C1__DWG_PN_1_0 C1__DWG_PN_1_1 (B) 175189-1 C1__DWG_PN_1_2 C1__DWG_PN_2_0 C1__DWG_PN_2_1 TE TERMINAL (A) 173645-3 C1__DWG_PN_3_0 C1__DWG_PN_3_1 - TE TERMINAL (A) 173645-4 - C1__DWG_PN_4_0 - C1__DWG_PN_4_1 C1__DWG_PN_2_2 - WIRE SIZE 6 1.25mm2 1.00mm2 0.85mm2 0.50mm2 1 2 3 B 4 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 1.52+/-0.05 [.060+/-.002] 1.42+/-0.05 [.056+/-.002] 1.37+/-0.05 [.054+/-.002] 1.25+/-0.05 [.049+/-.002] CRIMP HEIGHT REFERENCE SETTING W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 6.3 7.5 7.8 9.2 - 4 - W1__FA_SETTING_1 - W1__FA_SETTING_2 - W1__FA_SETTING_3 - W1__FA_SETTING_4 - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING. REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. RECOMMENDED SPARE PARTS REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. - CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. - 5. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 6 - THIS CRIMP PARAMETER IS PROVIDED TO MEET A CUSTOM AND UNIQUE CUSTOMER REQUIREMENT. IT HAS BEEN EVALUATED AND IS CONDITIONALLY SPECIFIED BY TE CONNECTIVITY. THIS CUSTOMIZED CRIMP PARAMETER IS NOT LISTED AS AN APPROVED APPLICATION WITHIN A TE CONNECTIVITY APPLICATION SPECIFICATION. TE CONNECTIVITY EXPRESSLY DISCLAIMS ANY AND ALL - WARRANTIES THAT THE PRODUCT WILL PERFORM SIMILARLY TO VALIDATED AND APPROVED APPLICATIONS, AS STATED WITHIN TE CONNECTIVITY APPLICATION SPECIFICATIONS, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. AS SUCH, IT IS HIGHLY RECOMMENDED THAT THE CUSTOMER PERFORM FURTHER DETAILED EVALUATION TO PERFORMANCE IN THE SPECIFIC APPLICATION. - 1 - ASSESS PRODUCT - 1 - 1 1 1 - 1 1 1 1 A - 1 - 1 1 1 1 1 1 1 1 1 1 1 1 2 ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 AMP 4805 REV 31MAR2000 & 4 of 4) MATERIAL - 1 TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH PART NO 1 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. mm -1 1 -77 -72 -71 -2 DIMENSIONS: 1 1 1 1 2 1 1 2 1 - 1 1 2 - - 1 1 1 - - 1 1 1 - - 1 1 1 - 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 1 1 - 1 1 2 - 1 1 1 1 1 - 2 1 2 - 4 2 1 1 1 4 2 1 1 1 4 2 1 1 1 4 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - REF REF 1 1 1 1 REF 1 1 - - REF 1 1 1 1 1 1 1 - 1 1 1 2119641-1 2119082-7 2079764-1 2119083-1 7-18023-7 2119580-1 2844940-1 994970-2 1-18028-2 2844908-1 2844907-1 455888-4 22278-8 854769-4 1803607-3 2119740-1 2168078-1 2168083-2 5-18022-5 21028-2 1338685-1 2168083-3 2168083-3 1803382-1 18023-9 2119652-1 2119653-1 1803583-9 1803515-1 1803602-1 1752356-2 2079383-5 2-2844962-8 2844992-1 455888-3 1320928-2 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-1 1-1633922-8 6-240641-4 1-2119780-2 238011-9 8-1633961-0 455888-4 4-456406-3 - - FEED CAM, AIR FEED CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE COUNTER, MAGNETIC WASHER, FLAT, REG M4 SCREW, LOCKING POST, LOCKING SPACER, CRIMPER SPRING, COMPRESSION HOLDER, INS DOCUMENTATION PACKAGE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, SKT HD CAP, RoHS, M4 X 8.0 SCR, HEX HD CAP, M4 X 6.0 PIN, SLOTTED SPRING .062 X .250 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 12.0 SCR, SKT HD CAP, RoHS, M4 X 12.0 HOLD DOWN, SPRING LOADED SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF ATLANTIC SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION SPACER DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION F PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM DWN 15MAY2014 CHK 15MAY2014 APVD 15MAY2014 L.GROSS T.ELBIN M.CLIFFORD NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 1 2119083 1 7-18023-7 1 2119580-1 1 2844940-1 1 COUNTER_994970 1 1-18028-2 1 2844908 1 2844907 1 455888-4 1 SIMP_22278-8 1 854769-4 1 1803607_3 1 2119740-1 2 2168078-1 1 2168083-2 1 5-18022-5 1 21028-2 1 1338685-1 4 2168083-3 2 2168083-3 1 1803382-1 3 18023-9 1 2119652 1 2119653 1 1803583-9 1 1803515-1 1 1803602-1 1 1752356-2 2 2079383-5 2 2-2844962-8 1 2844992-1 1 455888-3 1 1320928-2 1 2168083-2 1 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-1 1 1-1633922-8 1 6-240641-4 .. 1 ITEM_7 .. 1 ITEM_6 1 1-2119780-2 1 238011-9 1 8-1633961-0 1 455888-4 1 4-456406-3 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2079764_APP 248 244 243 242 241 239 238 164 119 99 98 82 77 74 71 67 66 60 59 58 56 54 53 50 49 48 47 46 44 41 34 33 30 29 28 24 21 20 19 13 12 11 10 9 8 7 7 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2119082-7 DESCRIPTION PRODUCT SPEC - 1 2119641-1 Ocean Side Feed Applicator - DRAWING NO 2266309 SCALE 1:2 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV D1 C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - FEED TYPE MECHANICAL A D 239 D 59 56 44 PNEUMATIC 2 244 243 A 53 238 242 50 2 3 4.3 7 8 59 C 82 1 0.5 REF 34 REF 1 C 2 SEE DETAIL A 3 1 56 4 TERMINAL SUPPORT LOCATION 28 5 41 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 44 44.25 0.05 66 DETAIL A 164 67 A 24 B 2 77 33 RAM SET-UP 58 74 19 30 20 29 21 B 9 1 ITEM 30 LOCATED AT FRONT HOLES 12 241 CAM POSITIONS 13 30mm STROKE 30 REF 29 REF 1 11 30mm STROKE 30mm STROKE 47 REF 119 46 98 99 34 54 8 1 60 54 10 1 248 48 FEED TRACK POSITION GUIDE BY INSULATION BARREL A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 49 40mm STROKE MECHANICAL POST FEED AMP 4805 REV 31MAR2000 49 40mm STROKE MECHANICAL PRE FEED 49 40mm STROKE AIR FEED DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 15MAY2014 CHK 15MAY2014 APVD 15MAY2014 L.GROSS T.ELBIN M.CLIFFORD TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 3 Ocean Side Feed Applicator - DRAWING NO 2266309 SCALE 1:2 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV D1 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 REVISION DESCRIPTION FEED TYPE 2- 2266309 -1 D FINE CRIMP HEIGHT ADJUST MECHANICAL 7- 2266309 -7 A CRIMP TOOLING KIT - D 3 2 LOC PART NUMBER 2- 2266309 -2 4 20 ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 5 FINE CRIMP HEIGHT ADJUST REVISIONS DIST A PACIFIC VERSION TERMINATOR INTERFACE ADAPTER 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - PNEUMATIC D D CRIMP WIRE INSUL APPLICATOR DATA SIZE 2.29 mm [.090] 2.45 mm [.096] APPLICATOR INSTRUCTIONS 408-35042 TYPE F F - TE TERMINAL TERMINAL DATA: TE CRIMP SPECIFICATION WIRE STRIP LENGTH TERMINAL APPLICATION SPECIFICATION (A)114-5092 - - (B)114-5092-3 - - TE TERMINAL (A) 173645-1 (A) 173645-5 WIRE SIZE 1.25mm2 1.00mm2 6 0.85mm2 0.50mm2 (A) 173645-2 (B) 175189-1 C1__DWG_PN_1_1 C1__DWG_PN_1_2 C1__DWG_PN_2_0 C1__DWG_PN_2_1 TE TERMINAL (A) 173645-3 - W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 W1__DWG_WGAUGE_4 1 - C1__DWG_PN_3_1 (A) 173645-4 1.52+/-0.05 [.060+/-.002] 1.42+/-0.05 [.056+/-.002] 1.37+/-0.05 [.054+/-.002] 1.25+/-0.05 [.049+/-.002] W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 W1__DWG_CRIMP_HT_4 7.5 7.8 9.2 - APPLY PART NUMBER 2-23419-6 LOCTITE TO THREADS OF ITEM 242. 4 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 6 RECOMMENDED THAT THE CUSTOMER PERFORM FURTHER DETAILED EVALUATION TO PERFORMANCE IN THE SPECIFIC APPLICATION. 1 1 1 1 1 1 - 1 1 - 1 1 - 1 1 - 1 1 1 1 1 - 1 1 - 1 - - - - - - 1 - 1 1 1 1 - A 1 1 - 1 1 1 - 1 1 1 - 1 2 1 - 1 2 2 - ASSESS PRODUCT 1 2 - 1 1 1 - WARRANTIES THAT THE PRODUCT WILL PERFORM SIMILARLY TO VALIDATED AND APPROVED APPLICATIONS, AS STATED WITHIN TE CONNECTIVITY APPLICATION SPECIFICATIONS, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. AS SUCH, IT IS HIGHLY 1 1 - 1 2 - - 1 1 1 - THIS CRIMP PARAMETER IS PROVIDED TO MEET A CUSTOM AND UNIQUE CUSTOMER REQUIREMENT. IT HAS BEEN EVALUATED AND IS CONDITIONALLY SPECIFIED BY TE CONNECTIVITY. THIS CUSTOMIZED CRIMP PARAMETER IS NOT LISTED AS AN APPROVED APPLICATION WITHIN A TE CONNECTIVITY APPLICATION SPECIFICATION. TE CONNECTIVITY EXPRESSLY DISCLAIMS ANY AND ALL 2 1 - 1 1 2 - 5. UNLESS SPECIFIED OTHERWISE TORQUE VALUES SHALL BE USED PER DOCUMENT, 101-35000. 1 1 - 3 1 1 - REFER TO SUPPLIED INSTRUCTION SHEET FOR CLEANING, LUBRICATION AND STORAGE OF APPLICATOR. 2 1 - 2 1 2 - RECOMMENDED SPARE PARTS 1 1 - 1 1 1 - B 1 1 - *WARNING ON INSTALLATION, SET WIRE DISC TO CRIMP HEIGHT REFERENCE SETTING FOR LARGEST WIRE SIZE. CRIMP HEIGHT REFERENCE SETTINGS GREATER THAN THE VALUE SHOWN MAY CAUSE DAMAGE TO THE CRIMP TOOLING. REFER TO THE INSTRUCTION SHEET FOR PROPER SETUP AND ADJUSTMENTS. 1 1 - W1__FA_SETTING_4 1 1 - W1__FA_SETTING_3 1 1 - W1__FA_SETTING_2 1 1 - W1__FA_SETTING_1 1 1 - 6.3 1 1 - 4 1 1 - CRIMP HEIGHT REFERENCE SETTING 4 - - C1__DWG_PN_4_1 1 4 C1__DWG_PN_4_0 - 1 - TE TERMINAL - REF REF - C1__DWG_PN_2_2 CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 C1__DWG_PN_3_0 1 1 TE TERMINAL C1__DWG_PN_1_0 1 - - TERMINALS APPLIED 1 1 - 2.00-2.60 mm [.079-.102 IN] 1 1 - 2119082-7 2079764-1 2119083-1 7-18023-7 2119580-1 2844940-1 994970-2 2119641-2 2168083-8 2168083-9 2119653-2 1-1803583-0 1803516-1 1-18028-2 2844908-1 2844907-1 455888-4 22278-8 854769-4 1803607-3 2119740-1 2168078-1 5-18022-5 21028-2 1338685-1 2168083-3 1803382-1 18023-9 2119652-1 1803602-1 1752356-2 2079383-5 2-2844962-8 2844992-1 455888-3 1320928-2 2168083-2 1-18028-2 2119533-1 2119806-1 3-22280-3 1-356885-4 2119805-1 1803095-1 1-1633922-8 6-240641-4 1-2119780-2 238011-9 8-1633961-0 455888-4 4-456406-3 1 1 - 3 INSULATION DIAMETER RANGE 3.50-4.50 mm [.138-.177 IN] C - .070 SERIES RECEPTACLE CONTACT TERMINAL NAME: 1 1 1 1 1 1 PART NO -77 -22 -21 THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 AMP 4805 REV 31MAR2000 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SCR, SKT HD CAP M3 X 4.0 MECHANICAL FEED ASSEMBLY AIR FEED MODULE COUNTER, MAGNETIC FEED CAM, AIR FEED SCR, SKT HD CAP, RoHS, M4 X 16 SCR, SKT HD CAP, RoHS, M4 X 20 FEED CAM, POST FEED APPLICATOR BASIC ASSEMBLY, SF RAM ASSEMBLY, SF PACIFIC WASHER, FLAT, REG M4 SCREW, LOCKING POST, LOCKING SPACER, CRIMPER SPRING, COMPRESSION HOLDER, INS DOCUMENTATION PACKAGE TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS, 2 x .188 SCR, HEX HD CAP, M4 X 6.0 PIN, SLOTTED SPRING .062 X .250 PAWL, FEED SCR, SKT HD CAP, RoHS, M4 X 12.0 HOLD DOWN, SPRING LOADED SCR, SKT HD CAP M4 X 6.0 FEED CAM, PRE FEED SCR, BHSC, RoHS (M8 X 25) SUPPORT, TERMINAL SCR, BHSC, RoHS (M4 X 20) SPACER, CYLINDRICAL, STRIP GUIDE ASSEMBLY, STRIP GUIDE SPACER, CRIMPER STRIP GUIDE SCR, SKT HD CAP, RoHS, M4 X 8.0 WASHER, FLAT, REG M4 STRIPPER, SIDE FEED INSERT, SHEAR SPRING, COMPRESSION STOP, SHEAR SHEAR HOLDER, FRONT FLOATING SHEAR, FRONT ANVIL, COMBINATION SPACER DEPRESSOR, SHEAR BLOCK, CRIMPER SPACER CRIMPER, INSULATION F PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM DWN 15MAY2014 CHK 15MAY2014 APVD 15MAY2014 L.GROSS T.ELBIN M.CLIFFORD NAME SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 1 7-18023-7 1 2119580-1 1 2844940-1 1 COUNTER_994970 1 2119641-2 1 2168083-8 4 2168083-9 1 2119653-2 1 1-1803583-0 1 1803516-1 1 1-18028-2 1 2844908 1 2844907 1 455888-4 1 SIMP_22278-8 1 854769-4 1 1803607_3 1 2119740-1 2 2168078-1 1 5-18022-5 1 21028-2 1 1338685-1 2 2168083-3 1 1803382-1 3 18023-9 1 2119652 1 1803602-1 1 1752356-2 2 2079383-5 2 2-2844962-8 1 2844992-1 1 455888-3 1 1320928-2 1 2168083-2 1 1-18028-2 1 2119533 1 2119806 1 SIMP_3-22280-3 1 1-356885-4 1 2119805-1 1 1803095-1 1 1-1633922-8 1 6-240641-4 .. 1 ITEM_7 .. 1 ITEM_6 1 1-2119780-2 1 238011-9 1 8-1633961-0 1 455888-4 1 4-456406-3 ITEM NO Harrisburg, PA 17105-3608 - WEIGHT 1 2119083 244 243 242 241 239 238 164 151 144 143 142 141 140 119 99 98 82 77 74 71 67 66 59 58 56 53 50 49 48 41 34 33 30 29 28 24 21 20 19 13 12 11 10 9 8 7 7 6 5 4 3 2 1 TE Connectivity APPLICATION SPEC - 1 2079764_APP DESCRIPTION PRODUCT SPEC - 1 2119082-7 Ocean Side Feed Applicator - DRAWING NO 2266309 SCALE 1:2 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV D1 C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 20 6 5 4 3 2 20 LOC A ALL RIGHTS RESERVED. 1 REVISIONS DIST 66 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - FEED TYPE MECHANICAL A D 239 140 59 D 2 244 56 PNEUMATIC 243 242 2 3 53 A 238 4.3 50 REF 8 7 34 59 82 1 C SEE DETAIL A 0.5 REF TERMINAL SUPPORT LOCATION 1 C 2 56 3 1 4 28 FEED SPRING SETTING POSITION (SHOWN FROM REAR SIDE) 5 41 140 REF 35.22 0.05 66 DETAIL A 164 67 2 77 33 A 24 B 19 74 20 30 RAM SET-UP 58 9 21 29 B 1 12 241 13 CAM POSITIONS 30mm STROKE 1 30 REF REF 29 30mm STROKE 30mm STROKE 142 ITEM 30 LOCATED AT FRONT HOLES 151 141 48 98 99 34 143 8 1 144 143 10 1 119 11 FEED TRACK POSITION GUIDE BY INSULATION BARREL A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION 49 MECHANICAL POST FEED 49 MECHANICAL PRE FEED 49 AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 15MAY2014 CHK 15MAY2014 APVD 15MAY2014 L.GROSS T.ELBIN M.CLIFFORD TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 Customer Accessible Production Drawing SHEETS 1 Ocean Side Feed Applicator - DRAWING NO 2266309 SCALE 1:2 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV D1