0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
82CV-005G-R

82CV-005G-R

  • 厂商:

    HUMIREL(泰科)

  • 封装:

    Cylinder

  • 描述:

    SNSR PRES

  • 数据手册
  • 价格&库存
82CV-005G-R 数据手册
te.com 82 Constant Voltage SPECIFICATIONS      Features     O-Ring Mount/Threaded Process Fittings -40ºC to +125ºC Operating Temperature Range Up to ±0.1% Pressure Non Linearity Solid State Reliability Applications       Medical Instruments Process Control Fresh & Waste Water Measurements Partial Vacuum Gas Measurement Pressure Transmitters Tank Level Systems (RV & Industrial) 316L SS Pressure Sensor 19mm Diameter Package 0 - 100mV Output Absolute and Gage Temperature Compensated The 82 constant voltage is a 19 mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless  steel housing. The 82 constant voltage can be configured for O-ring mounting or threaded process fittings and is designed for OEM  applications where compatibility with corrosive media is required.  The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. A  ceramic substrate is attached to the package that contains lasertrimmed resistors for temperature compensation and offset  correction. Please refer to the 82 uncompensated and compensated datasheets for more information on different features of the 82. CLICK HERE › CONNECT WITH A SPECIALIST TE CONNECTIVITY SENSORS /// 82CV REVA 10/2021 Page 1 82 Digital Output Pressure Sensor Specifications Unless otherwise specified, Supply Voltage: 10 VDC; Ambient Temperature: 25°C ≥015PSI ≤005PSI PARAMETERS Span Zero Pressure Output Pressure Non Linearity Pressure Hysteresis MIN TYP MAX 1psi: MIN77, TYP 80, MAX83 5psi: MIN98, TYP100, MAX102 -2.0 0 2.0 1psi: -0.30 TO +0.30 5psi: -0.20 TO +0.20 MIN TYP MA X UNITS NOTES 99 100 101 mV 1 -1.0 0 1.0 mV 1 -0.1 - 0.1 %Span 2 -0.10 ±0.02 0.10 -0.05 ±0.02 0.05 %Span - ±0.02 - - ±0.02 - %Span Input Resistance 5.5 9.0 12.5 5.5 9.0 12.5 KΩ Output Resistance 4.0 - 7.0 4.0 - 6.0 KΩ Temperature Error – Span -1.0 - 1.0 -1.0 - 1.0 %Span 3 Temperature Error – Offset Thermal Hysteresis – Span -1.0 - 1.0 -1.0 - 1.0 %Span 3 -0.25 ±0.05 0.25 -0.25 ±0.05 0.25 %Span 3 Thermal Hysteresis – Offset -0.25 ±0.05 0.25 -0.25 ±0.05 0.25 %Span 3 Long Term Stability – Span - ±0.10 - - ±0.10 - %Span Long Term Stability – Offset - ±0.25 - - ±0.10 - %Span Supply Voltage Output Load Resistance - 10 14 - 10 14 V 4 5M - - 5M - - Ω 5 Insulation Resistance (50Vdc) 50M - - 50M - - Ω 6 Output Noise (10Hz to 1KHz) - 1.0 - - 1.0 - µV p-p Response Time (10% to 90%) - 0.1 - - 0.1 - ms Repeatability Pressure Overload 1psi: 10x MAX 5psi: 3x MAX - - 3x Rated Pressure Burst 1psi: 12x MAX 5psi: 4x MAX - - 4x Rated Compensated Temperature 1psi: 0 TO 50 5psi: 0 TO 70 -20 85 °C 7 Operating Temperature -20 - 70 -40 - 125 ºC 8 Storage Temperature -40 - 125 -40 - 125 ºC 8 Media – Pressure Port Liquids and Gases compatible with 316L Stainless Steel and Buna-N Notes 1. Measured at vacuum for absolute (A), ambient for gage (G). 2. Best fit straight line. 3. Over the compensated temperature range with respect to 25°C. 4. Guarantees output/input ratiometricity. 5. Load resistance to reduce measurement errors due to output loading. 6. Between case and sending element. 7. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer. 8. Maximum temperature range for product with standard cable and connector is -20 to +105°C. 9. Standard Gage units are not recommended for vacuum applications, For vacuum applications below 1/2 atmosphere, consult factory. 10. Device Marking: Each part shall be identified with Model Number, Pressure Range, Type, Lot Number, Serial Number and Date Code 11. Shipping/Packaging The Stainless Steel Diaphragm is protected by a plastic cap (No Fitting Options). Each unit will be packaged individually in a plastic vial with anti-static foam. 12. Direct mechanical Contact with diaphragm is prohibited. Diaphragm surface must remain free of defects (scratches, punctures, dents, fingerprints, etc) for device to operate properly. Caution is advised when handling parts with exposed diaphragms. Use protective cap whenever devices are not in use. TE CONNECTIVITY SENSORS /// 82CV REVA 10/2021 Page 2 82 Digital Output Pressure Sensor Dimensions Dimensions are in inches mm TE CONNECTIVITY SENSORS /// 82CV REVA 10/2021 Page 3 82 Digital Output Pressure Sensor RECOMMENDED MOUNTING DIMENSIONS APPLICATION SCHEMATIC TE CONNECTIVITY SENSORS /// 82CV REVA 10/2021 Page 4 82 Digital Output Pressure Sensor ORDERING INFORMATION Part Number 82 CV– 030 G – 3 C T Pressure Range [psi] 001 (Gage Only) 005 015 030 050 100 300 500 G A Vent Tube No Tube T [Blank] P R C Electrical Solder Pads Ribbon cable Cable w/ Connector [Blank] 1 2 3 9 Pressure Type Gage Absolute Fitting Type No Fitting, Weldable 1/4-18 NPT 1/8-27 NPT 7/16-20 UNF 1/4-19 BSP Refer to Fitting Table for more information CLICK HERE › CONNECT WITH A SPECIALIST NORTH AMERICA Tel +1 800 522 6752 EUROPE Tel +31 73 624 6999 ASIA Tel +86 0400 820 6015 te.com/sensors TE Connectivity, TE, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2021 TE Connectivity Corporation. All Rights Reserved. Version A7 02/2021 TE CONNECTIVITY SENSORS /// 82CV REVA 10/2021 Page 5
82CV-005G-R 价格&库存

很抱歉,暂时无法提供与“82CV-005G-R”相匹配的价格&库存,您可以联系我们找货

免费人工找货