852625N001

CUSTOMER DRAWING Product Name SO63-1-9036-22 SO63-1-9036-20 SO63-1-9036-18 SO63-2-9036-22 SO63-2-9036-20 SO63-2-9036-18 SO63-3-9036-22 SO63-3-9036-20 SO63-3-9036-18 SO63-4-9036-22 SO63-4-9036-20 SO63-4-9036-18 SO63-5-9036-22 SO63-5-9036-20 SO63-5-9036-18 A±1.75 [A±0.070] Product Dimensions øB min øC min SO631R 16.50 [0.650] 1.90 [0.075] 2.65 [0.105] SO632R 16.50 [0.650] 2.65 [0.105] 3.55 [0.145] SO633R 16.50 [0.650] 4.30 [0.170] 5.00 [0.200] SO634R 19.10 [0.750] 5.95 [0.235] 6.50 [0.255] SO635R 19.10 [0.750] 7.00 [0.275] 7.60 [0.300] Mark MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. Marked per table. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR RING: SOLDER: TYPE Sn63 per ANSI / J-STD-006. FLUX: TYPE ROL1 per ANSI / J STD-004. TERMAL INDICATOR RING: Fusible alloy with melt point of 221°C. 3. MELTABLE RINGS: Environment resistant fluorocarbon-based thermoplastic 4. PRE-INSTALLED LEAD: Raychem 55PC6121-GA. “GA”=size (AWG) of lead, color: white with 2 black stripes. APPLICATION 1. These parts are designed to provide an environment resistant shield termination on cables, rated for 125C min. having tin or silver-plated shields, and jackets compatible with the insert material. See M83519/2 or consult TE Connectivity. 2. When properly installed, these parts will meet the performance requirements of Raychem RT-1404 and SAE-AS-83519/2. 3. Part selection: Measure cable jacket diameter at its maximum point. Select the smallest terminator that has a “B” diameter larger than the cable diameter. 4. Cable is to be stripped to expose 6.0 -7.5mm [0.235-0.295] of shield. 5. Part may be installed using any Raychem approved convection or infra-red heating tool. Tools must be equipped with a suitable reflector. For detailed assembly instruction see Raychem RCPS-100-70. TITLE: Raychem . Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A PREPARED BY: mforonda SOLDERSLEEVE DEVICE WITH PRE-INSTALLED LEAD, IMMERSION RESISTANT Devices DOCUMENT NO.: SO63-X-9036-GA ANGLES: N/A Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate ROUGHNESS IN the suitability of the product for their MICRON application. ECO NUMBER: REPLACES: ECO-17-002137 D060206 REV.: DATE: B CAGE CODE : 06090 17-Feb-2017 SCALE: SIZE: --- A © 2005-2017 TE Connectivity Corporation. All rights reserved. SolderSleeve is a trademark of Tyco Electronics Corporation If this document is printed it becomes uncontrolled. Check for the latest revision. SHEET: 1 of 1