AMPMODU Interconnection System
AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System
Product Facts
■
■
■
■
■
■
■
■
■
■
Rugged connector system
featuring .031 x .062
(0.79 x 1.57) posts with
mating receptacles.
Current rating 5 amps max
per contact. Varies due to
ambient temperature, wire
size and duty cycles.
Available for board-toboard and wire-to-board
applications.
Posts available on strip
for machine application
directly to pc board or in
housings for board
mounting.
Receptacles available for
board mounting or wire
crimping.
Contacts available in both
tin and gold plating.
Flame retardant
thermoplastic housings
94V-0 rated.
Locking Clip contacts
available to mate with
.031 x .062 posts.
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Certified by Canadian
Standards
Association,
File No. LR 16455
7
The .031 x .062
[0.79 x 1.57]
interconnection system has
served as an industry
standard for modular
packaging for over three
decades. It is a rugged,
large scale system
designed for board-toboard and board-to-wire or
cable applications that has
offered millions of reliable
interconnections and
countless mating cycles.
This versatile
interconnection system
successfully meets the
requirements for most
modular power supply
packaging.
Board mounted receptacles
and receptacle assemblies
are available in various
geometries, offering
packaging interconnections
that include perpendicular,
parallel and stacking
capabilities. Machine
applied terminations,
through matched
application equipment, are
geared to virtually any
production requirement,
assuring the lowest
possible applied cost.
packaging requirements of
your system. However, in
instances where packaging
configurations do not lend
themselves to the
economies of assemblies,
Tyco Electronics can
provide for the discrete
location of individual posts
and receptacles.
Crimp snap-in receptacles
for 26-18 AWG
[0.12 – 0.9mm2] wire
provide excellent discrete
wire terminations. Housings
for these contacts provide
for ease of handling
terminations in high density
applications.
If your interconnections
require Top Entry, Bottom
Entry and/or Side Entry for
perpendicular, parallel and
stacked configurations, the
.031 x .062 [0.79 x 1.57]
interconnection system can
fulfill your needs with the
lowest applied cost through
efficient interconnections
and supporting application
equipment.
AMPMODU mating posts
are supplied typically as
header assemblies. They
are available in various
sizes to meet the
interconnection and
301
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System (Continued)
Locking Clip
Contacts
(Page 317)
Standard Profile
Housing, Unkeyed
for Crimp Snap-In
Recetacles
(Page 309-310)
Locking Clip
Connector
(Page 318)
Header, Right-Angle
Post, Keyed
(Page 316)
Board Mount
Receptacles,
Horizontal
and Vertical
Styles
(Pages 303 & 304)
7
Straight Posts
Machine Applied
(Page 312)
Straight Posts
Machine Applied
(Page 312)
Board Mount
Receptacle
Assembly,
Vertical
(Page 305)
Header, Straight Post
(Pages 314 & 315)
Header, Right-Angle
Post, Keyed
(Page 316)
Board Mount
Receptacle
Assembly,
Horizontal
(Pages 306 & 307)
Header, Right-Angle
Post, Keyed
(Page 316)
Low Profile
Housing, Keyed
(Page 311)
Receptacles,
Crimp Snap-In
(Page 308)
Rugged-self supporting, onepiece contact body
Wide entry for post to
receptacle
misalignment
Reliability-dual
cantilever spring
contact design
and built-in
anti-overstress
Offers high or low
contact forces
Wide
Misalignment
Tolerance
Cantilever
Beams
Anti-overstress
The AMPMODU receptacle
cross-section is primarily
rectangular, with rounded
corners. Two integral
cantilever beams contact
the mating square or
rectangular posts.
Deflection of these spring
members is limited by antioverstress and excessive
permanent deformation is
prevented. This feature
allows a wide range of
tolerances for misalignment
of mating contacts.
The configuration of the
receptacle completely
encloses the spring
members preventing
damage during handling
and assembly and makes
the system compatible with
automatic application
techniques.
This design also permits
the use of the receptacles
without housings or
encapsulation.
Note: Application of a
contact lubricant is part of
the manufacturing process
of all AMPMODU tin-plated
crimp products. However, it
is not part of the
manufacturing process of
products that customers
will solder, then clean. For
these products, Tyco
Electronics recommends
that customers purchase a
contact lubricant. (See
application specification
114-25004 for
further information.)
Insulation Support
Barrel
Wire Crimp Receptacle
302
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod I Receptacles, Board Mount, .031 x .062 [0.79 x 1.57] Centerline
Vertical and Horizontal
Board Mount
Receptacle Styles
.093
[0.99] Max.
.093
[0.99] Max.
.125
[3.18] Max.
.125
[3.18] Max.
.300
[7.62]
.300
[7.62]
Bottom
Post Entry
Type A
7
.093
[2.36] Max.
Top
Post Entry
Type B
.125
[3.18] Max.
.300
[7.62]
Horizontal
Post Entry
Type C
Related Product Data:
Recommended Board Layout for
Type C—page 306
Mates with
Machine Applied Posts—page 312
Headers—pages 314-316
Application Tooling—
page 319-323
Performance Specifications—
page 324
Recommended Board Layout for Receptacle Assemblies
and Individual Receptacles (Type A and B)
±.003
2J [±0.08]
.100
[2.54] Min.
±.003
J [±0.08]
.055
[1.40]
Min.
Technical Documents (page 324):
.125±.002
[3.18±0.05]
.125
[3.18]
Keying Plug
Round Hole
(Post Entry Type A or B)
Part No. 86181-2
Use in Board Mount Receptacles
J-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .150 [3.81]; for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board. For solder mask,
see Tyco Electronics Instruction Sheet 408-7411.
Note: Drawings depict normal use of the contact in a one or two-sided circuit board. When using plated thru-holes,
refer to Tyco Electronics Engineering Report ER-001 and Tyco Electronics Instruction Sheet 408-7411. For solder
mask, see Tyco Electronics Instruction Sheet 408-7411.
303
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod I Receptacles, Board Mount, .031 x .062 [0.79 x 1.57] Centerline (Continued)
Material and Finish:
Copper alloy, plated as follows:
Plating A —Selectively plated
.000030 [0.00076] gold on contact
area, with gold flash over .000050
[0.00127] nickel on entire contact
Plating B—.000079 [0.00201] min.
tin on entire contact
Plating C—(Solder Resist)-.000030
[0.00076] gold over .000050 [0.00127]
nickel on contact area, .000500
[0.01270] aluminum on inside area of
solder tines; remainder of contact
unfinished
7
Type
Board
Thickness
Range
Dimension
T
(Ref. Pg. 274)
A
.070-.055 [1.78-1.40]
.112 [2.84]
B
.070-.055 [1.78-1.40]
.112 [2.84]
C
.103-.055 [2.62-1.40]
.145 [3.68]
.210
[5.33]
.010
[0.25]
Max.
Standard Pressure
Receptacle
High Pressure
Receptacle
Standard Pressure
Part Nos.
Strip Form Loose Piece
Plating A
86477-2
86480-2
Plating B
86477-3
—
Plating C (Solder Resist)
87772-2
—
Plating A
87003-1
87105-1
Plating B
87003-2
—
Plating C (Solder Resist)
87774-2
—
Plating A
85487-4
85493-4
Plating B
85487-3
—
Finish
.020
[0.51]
Max.
.210
[5.33]
High Pressure
Part Nos.
Strip Form Loose Piece
—
—
87316-3
—
—
—
—
—
—
—
—
—
86432-8
86434-6
86432-1
86434-1
Insertion
Applicator No. for
"U" Frame Machine
466376-1
466376-1
466376-1
466376-1
466376-1
466376-1
565967-3
Notes: 1. All strip form parts in packaged quantities of 5,000 each.
2. All loose piece parts in packaged quantities of 500 each.
304
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod I Receptacle Assemblies, Vertical Board Mount,
.031 x .062 [0.79 x 1.57] Centerline
Single Row .156 [3.96]
Centerline
.046
[1.17]
Contact
Area
.182
[4.62]
.018
[0.46]
The letter A stamped
on contact indicates
mating end of
receptacle.
Photo 110971
X-X
7
B ±.015
[±0.38]
A
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated
Contacts—Copper alloy, plated as
follows:
Plating A—Selectively plated .000030
[0.00076] gold on contact area, with
gold flash over .000050 [0.00127]
nickel on entire contact
Plating B—.000079 [0.00201] min.
tin on entire contact
Plating C—(Solder Resist)-.000030
[0.00076] gold over .000050 [0.00127]
nickel on contact area, .000500
[0.01270] aluminum on inside area of
solder tines; remainder of contact
unfinished
Related Product Data:
Recommended Board Layout—
page 306
Mates with
Machine Applied Posts—page 312
Headers—pages 314-316
Performance Specifications—
page 324
Technical Documents (page 324):
.156
[3.96] Typ.
.175±.007
[4.45±0.18]
X
X
+.010
.112-.000
+0.25
[2.84±0.00]
.300±.003
[7.62±0.08]
Type A
Type B
No.
of
Pos.
A
B
Plating A
Plating B
Plating C
Plating B
Plating A
Plating B
Plating C
2
.156 [3.96]
.312 [7.92]
87984-2
87983-2
87989-2
87993-2
87986-2
87985-2
87990-2
3
.312 [7.92]
.468 [11.89]
87984-3
87983-3
87989-3
87993-3
87986-3
87985-3
87990-3
4
.468 [11.89]
.624 [15.85]
87984-4
87983-4
87989-4
87993-4
87986-4
87985-4
87990-4
5
.624 [15.85]
.780 [19.81]
87984-5
87983-5
87989-5
87993-5
87986-5
87985-5
87990-5
6
.780 [19.81]
.936 [23.77]
87984-6
87983-6
87989-6
87993-6
87986-6
87985-6
87990-6
7
.936 [23.77]
1.092 [27.74]
87984-7
87983-7
87989-7
87993-7
87986-7
87985-7
87990-7
8
1.092 [27.74]
1.248 [31.70]
87984-8
87983-8
87989-8
87993-8
87986-8
87985-8
87990-8
9
1.248 [31.70]
1.404 [35.66]
87984-9
87983-9
87989-9
87993-9
87986-9
87985-9
87990-9
10
1.404 [35.66]
1.560 [39.62]
1-87984-0
1-87983-0
1-87989-0
1-87993-0
1-87986-0
1-87985-0
1-87990-0
11
1.560 [39.62
1.716 [43.59]
1-87984-1
1-87983-1
1-87989-1
1-87993-1
1-87986-1
1-87985-1
1-87990-1
12
1.716 [43.59]
1.872 [47.55]
1-87984-2
1-87983-2
1-87989-2
1-87993-2
1-87986-2
1-87985-2
1-87990-2
13
1.872 [47.55]
2.028 [51.51]
1-87984-3
1-87983-3
1-87989-3
1-87993-3
1-87986-3
1-87985-3
1-87990-3
14
2.028 [51.51]
2.184 [55.47]
1-87984-4
1-87983-4
1-87989-4
1-87993-4
1-87986-4
1-87985-4
1-87990-4
15
2.184 [55.47]
2.340 [59.44]
1-87984-5
1-87983-5
1-87989-5
1-87993-5
1-87986-5
1-87985-5
1-87990-5
16
2.340 [59.44]
2.496 [63.40]
1-87984-6
1-87983-6
1-87989-6
1-87993-6
1-87986-6
1-87985-6
1-87990-6
17
2.496 [63.40]
2.652 [67.36]
1-87984-7
1-87983-7
1-87989-7
1-87993-7
1-87986-7
1-87985-7
1-87990-7
18
2.652 [67.36]
2.808 [71.32]
1-87984-8
1-87983-8
1-87989-8
1-87993-8
1-87986-8
1-87985-8
1-87990-8
19
2.808 [71.32]
2.964 [75.29]
1-87984-9
1-87983-9
1-87989-9
1-87993-9
1-87986-9
1-87985-9
1-87990-9
20
2.964 [75.29]
3.120 [79.25]
2-87984-0
2-87983-0
2-87989-0
2-87993-0
2-87986-0
2-87985-0
2-87990-0
Dimensions
Standard Pressure
High Pressure
Standard Pressure
Keying Plug
Post Entry
Type A
Part No. 86181-2
(Use in Board Mount
Receptacles)
Post Entry
Type B
305
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod I Receptacle Assemblies, Horizontal Board Mount,
.031 x .062 [0.79 x 1.57] Centerline
Single Row .156 [3.96]
Centers
Material and Finish:
Housing—Black thermoplastic, 94V-0
rated
Contacts—Copper alloy, plated as
follows:
Plating A—Selectively plated .000030
[0.00076] gold contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating B—.000079 [0.00201] min.
tin on entire contact
7
.018
[0.46]
.046
[1.17]
Contact
Area
.182
[4.62]
The letter A stamped
on contact indicates
mating end of
receptacle.
X-X
B ±.015
[±0.38]
A
.156
[3.96] Typ.
.333±.010
[8.46±0.25]
.145
[3.68]
Post Entry
Type C
.175±.007
[4.45±0.18]
Related Product Data:
Mates with
Machine Applied Posts—page 312
Headers—pages 314-316
Performance Specifications—
page 324
X
.300±.003
[7.62±0.08]
X
Technical Documents (page 324):
Recommended Board
Layouts for Receptacle
Assemblies and Individual
Receptacles (Type C)
±.003
H [±0.08]
±.003
2H [±0.08]
±.003
2H [±0.08]
.055±.005
[1.40±0.13]
.340
[ +.005
-.000 ]
[ +.005
-.000 ]
±.003
H [±0.08]
.100
[2.54]
Max.
+.005
.340
-.000
[8.64+0.13]
[
[8.64+0.13]
.073±.003
[1.85±0.08]
Typ. Dia.
.073±.003
[1.85±0.08]
Typ. Dia.
This configuration recommended
for use with machine applied posts
or headers with a .345 [18.76]
minimum mating end post length.*
This configuration recommended
for use with machine applied posts
or headers with a .500 [12.70]
minimum mating end post length.*
.073±.003
[1.85±0.08]
Typ. Dia.
Keying Plug
±.003
H [±0.08]
.340
[8.64+0.13]
This configuration recommended
for use with machine applied posts
or headers with a .405 [10.29]
minimum mating end post length.*
±.003
2H [±0.08]
The mating post length is depicted by the A dimension on page 283 (machine applied posts) and the C dimension on
pages 314-316 (headers).
H-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .125 [3.18] for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board.
Part No. 86181-2
(Use in Board Mount
Receptacles)
306
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
]
AMPMODU Interconnection System
Mod I Receptacle Assemblies, Horizontal Board Mount,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Dimensions
A
B
.156 [3.96]
.312 [7.92]
.312 [7.92]
.468 [11.89]
.468 [11.89]
.624 [15.85]
.624 [15.85]
.780 [19.81]
.780 [19.81]
.936 [23.77]
.936 [23.77]
1.092 [27.74]
1.092 [27.74]
1.248 [31.70]
1.248 [31.70]
1.404 [35.66]
1.404 [35.66]
1.560 [39.62]
1.560 [39.62]
1.716 [43.59]
1.716 [43.59]
1.872 [47.55]
1.872 [47.54]
2.028 [51.51]
2.028 [51.51]
2.184 [55.47]
2.184 [55.47]
2.340 [59.44]
2.340 [59.44]
2.496 [63.40]
2.496 [63.40]
2.652 [67.36]
2.652 [67.36]
2.808 [71.32]
2.808 [71.32]
2.964 [75.29]
2.964 [75.29]
3.120 [79.25]
Standard Pressure
Plating A
Plating B
87988-2
87987-2
87988-3
87987-3
87988-4
87987-4
87988-5
87987-5
87988-6
87987-6
87988-7
87987-7
87988-8
87987-8
87988-9
87987-9
1-87988-0
1-87987-0
1-87988-1
1-87987-1
1-87988-2
1-87987-2
1-87988-3
1-87987-3
1-87988-4
1-87987-4
1-87988-5
1-87987-5
1-87988-6
1-87987-6
1-87988-7
1-87987-7
1-87988-8
1-87987-8
1-87988-9
1-87987-9
2-87988-0
2-87987-0
High Pressure
Plating B
87995-2
87995-3
87995-4
87995-5
87995-6
87995-7
87995-8
87995-9
1-87995-0
1-87995-1
1-87995-2
1-87995-3
1-87995-4
1-87995-5
1-87995-6
1-87995-7
1-87995-8
1-87995-9
2-87995-0
7
307
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod I Receptacles, Crimp Snap-In (Wire Applied),
.031 x .062 [0.79 x 1.57] Centerline
Material and Finish:
Copper alloy, plated as follows:
Plating A—Selectively plated .000030
[0.00076] gold on contact area, with
gold flash over .000050 [0.00127]
nickel on entire contact
Plating B—.000016 [0.00041] min.
tin on entire contact
Related Product Data:
Housings used in—pages 309-311
Mate with Machine Applied Posts—
page 312
Headers—pages 314-316
Application Tooling—page 319-323
Performance Specification—page
324
Technical Documents (page 324):
7
.125
[3.18] Max.
.580
[14.73]
.280
[7.11]
.093
[2.36]
Max.
.014
[0.36]
Max.
.210
[5.33]
Wire Size Range
AWG [mm2]
Ins. Dia.
Range
Finish
22-18 [0.3-0.9]
.051-.090 [1.30–2.29]
Plating A
Plating B
Standard Pressure
Strip Form
Loose Piece
Packaged
Part
Packaged
Part
Quantities
Nos.
Quantities
Nos.
5,000
102099-2
500
102103-2
5,000
102099-5
500
102103-3
Applicator (Standard Pressure)
Wire Size Range
AWG [mm2]
Standard Pressure
Receptacle
22-18
Part
Number
Type
Used With
Machine
466764-3
466764-2
466764-1
466937-1
HDM
HDM
HDM
SCA
Model "G" (AMP-O-LECTRIC)
Model "K" (AMP-O-LECTRIC)
CLS IV+ (AMPOMATOR)
Stripper-Crimper (AMP-O-MATIC)
Premium
CERTI-CRIMP
Hand Tool
Part Number
90274-2
AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines and
Stripper/Crimper Machines. Consult Tyco Electronics.
.020
[0.51]
Max.
.210
[5.33]
Wire Size Range
AWG [mm2]
Ins. Dia.
Range
22-18 [0.3-0.9]
.051-.090 [1.30–2.29]
26-22 [0.12-0.4]
0.42-.073 [1.07-1.85]
High Pressure
Receptacle
Finish
Plating A
Plating B
Plating A
Plating B
High Pressure
Strip Form
Loose Piece
Packaged
Part
Packaged
Part
Quantities
Nos.
Quantities
Nos.
5,000
102100-2
500
102104-2
5,000
102100-5
500
102104-3
5,000
102102-2
500
102106-2
5,000
102102-5
500
102106-3
Applicator (High Pressure)
Wire Size Range
AWG [mm2]
22-18 [0.3-0.9]
26-22 [0.12-0.4]
Extraction Tool Part No. 843473-1
Part Instruction Sheet 408-9451
Part
Number
Type
466764-3
466764-2
466764-1
466937-1
466763-2
466763-1
HDM
HDM
HDM
SCA
HDM
HDM
Used With
Machine
Premium
CERTI-CRIMP
Hand Tool
Part Number
Model "G" (AMP-O-LECTRIC)
Model "K" (AMP-O-LECTRIC)
CLS IV+ (AMPOMATOR)
Stipper-Crimper (AMP-O-MATIC)
Model "K" (AMP-O-LECTRIC)
CLS IV+ (AMPOMATOR)
90274-2
90328-1
AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines and
Stripper/Crimper Machines. Consult Tyco Electronics.
308
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod I Receptacle Housings, Standard Profile, Unkeyed,
.031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers, Without Strain
Relief
.030±.010
[0.76±0.25]
Identifiers on ends of
housing are optional at
AMP’s discretion
.790
[20.07]
7
Photo 110976
±.015
L [±0.38]
Material:
Black thermoplastic, flame retardant,
94V-0 rated
.077
[1.96]
.250
[6.35] Max.
Y
.120
[3.05] Typ.
Related Product Data:
Contacts used with—page 308
Mate with
Machine Applied Posts-page 312
Headers—pages 314-316
Performance Specifications—page
324
Locking Ledge
Identification
Y
.156
[3.96] Typ.
Y-Y
.156±.003
±.003
A spaces @ [3.96±0.08] = B [±0.08]
Technical Documents (page 324):
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
25
A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
24
Dimensions
B
.156 [3.96]
.312 [7.92]
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.744 [95.10]
L
.312 [7.92]
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.120 [79.25]
3.900 [99.06]
Housing Part Nos.
Stamped1
Unstamped2
—
2-87025-5
—
2-87025-1
—
1-87025-3
—
2-87025-3
87025-1
2-87025-2
—
3-87025-4
—
1-87025-6
87025-9
1-87025-0
1-87025-7
1-87025-8
—
3-87025-6
1-87025-1
1-87025-2
—
3-87025-0
—
3-87025-8
—
3-87025-2
—
2-87025-0
—
4-87025-0
—
4-87025-4
—
4-87025-6
—
4-87025-8
—
5-87025-0
Notes: 1Markings on housing.
2No markings on housing.
309
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod I Receptacle Housings, Standard Profile, Unkeyed,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
Single Row, .156 [3.96]
Centers, With Strain Relief
.992
[25.20]
.206±.020
[5.23±0.51]
.290
[7.37]
.040
[1.02]
.694
[17.63]
.397
[10.08]
.446
[11.33] .298 [7.57]
.094
[2.39] Dia.
4 Plc.
.843
[21.41]
Photo 110998
7
Material:
Black thermoplastic, flame retardant,
94V-0 rated
1.640
[41.66]
Related Product Data:
Contacts used with—page 308
Mate with
Machine Applied Posts—page 312
Headers—pages 314-316
Performance Specifications—
page 324
1.560
[39.62]
10 Position Receptacle Housing, Part No. 1-102090-0
Technical Documents (page 324):
310
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod I Receptacle Housings, Low Profile, Keyed,
.031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers
Identifiers on ends of
housing are optional at
AMP’s discretion
.030±.010
[0.76±0.25]
Locking Ledge
Identification
.640
[16.26]
.125
[3.18]
Photo 110974
.040
[1.02]
.075
[1.91] Typ.
7
±.015
L [±0.38]
Material:
.077
[1.96]
Black thermoplastic, flame retardant,
94V-0 rated
.250
[6.35] Max.
Related Product Data:
Contacts used with—page 308
Mate with
Headers—pages 314-316
Performance Specifications—
page 324
.156±.003
±.003
A spaces @ [3.96±0.08] = B [±0.08]
Dimensions
No. of
Pos.
Technical Documents (page 324):
Keying Plug
.120
[3.05] Typ.
.156
[3.96] Typ.
A
L
No. of
Keys
.312 [7.92]
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.120 [79.25]
3.900 [99.06]
1
1
2
2
3
3
4
3
5
4
6
4
7
5
8
6
6
8
10
11
B
2
1
.156 [3.96]
3
2
.312 [7.92]
4
3
.468 [11.89]
5
4
.624 [15.85]
6
5
.780 [19.81]
7
6
.936 [23.77]
8
7
1.092 [27.74]
9
8
1.248 [31.70]
10
9
1.404 [35.66]
11
10
1.560 [39.62]
12
11
1.716 [43.59]
13
12
1.872 [47.55]
14
13
2.028 [51.51]
15
14
2.184 [55.47]
16
15
2.340 [59.44]
17
16
2.496 [63.40]
18
17
2.652 [67.36]
19
18
2.808 [71.32]
20
19
2.964 [75.29]
25
24
3.744 [95.10]
1No marking on housing.
Housing Part Nos.
(Unstamped)1
87159-3
87159-4
87159-5
87159-1
87159-6
87159-7
87159-8
87159-9
1-87159-0
1-87159-1
1-87159-2
87159-2
1-87159-3
1-87159-4
1-87159-5
1-87159-6
1-87159-7
1-87159-8
1-87159-9
2-87159-4
Key
Locations
A
A
A,C
A,D
A,C,E
A,C,E
A,C,E,G
A,D,G
A,C,E,G,J
A,D,G,K
A,C,E,G,J,L
A,D,J,M
A,C,E,G,J,L,N
A,D,G,K,N
A,C,E,G,J,L,N,Q
A,D,G,K,N,R
A,D,F,J,P,S
B,D,F,J,L,N,Q,S
A,C,E,G,J,L,N,Q,S,U
A,C,E,H,K,M,Q,S,U,W,Y
Keying Plug References
Material: Natural Color Nylon
Wire Exit Face
Wire Exit Face
.160
[4.06]
.050
[1.27]
Fits
through
.125 [3.18]
Dia. Hole
Part No. 87116-2
Post
Mating Face
Keying Plug
87116-2
(Flush)
For Standard Housings
Post
Mating Face
Keying Plug
87116-2
(Flush)
For Low Profile Housings
311
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod I Posts, Machine Applied, .031 x .062 [0.79 x 1.57] Centerline
Straight Posts
.150 Cut Off
[3.81]
±.003
2D [±0.08]
.062
[1.57]
±.003
D [±0.08]
.150
[3.81]
E
.080
[2.03]
.048
[1.22]
A
7
B
.078±.002 Dia.
[1.98±0.05]
(Drilled Hole)
Typical Assembly
.031
[0.78]
C
Recommended Mounting Holes
Material and Finish:
Brass, plated as follows:
Plating A—.000030 [0.00076] gold
over .000050 [0.00127] nickel on entire
post
Plating B—.0001000-.000200
[0.00254-0.00508] bright tin over
.000050 [0.00127] nickel on entire post
D—Post centers may vary depending on requirements. Minimum nominal
centerline spacing between adjacent contacts is .125 [3.18]; .003 [0.08]
tolerances not to accumulate over length of board.
E—Post center location from edge of board may vary to satisfy application.
Related Product Data:
Mate with Board Mount
Receptacles—pages 303 & 304
Board Mount Receptacle Assemblies—
pages 305-307
Crimp Snap-In Receptacles and
Housings—pages 308-310
Locking Clip Contacts & Housings—
pages 317-318 (see page 317 for
recommended post length).
Application Tooling—pages 319323
Performance Specifications—page
324
A
Technical Documents (page 324):
Dimensions
B
C
.360 [9.14]
.187 [4.75]
.595 [15.11]
.380 [9.65]
.320 [8.13]
.748 [19.00]
.400 [10.16]
.125 [3.18]
.573 [14.55]
.480 [12.19]
.187 [4.75]
.715 [18.16]
.565 [14.35]
.187 [4.75]
.800 [20.32]
.800 [20.32]
.150 [3.81]
.998 [25.35]
Finish
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
Strip Form1
86147-7
86147-2
1-86147-5
86147-9
4-86147-2
3-86147-7
1-86147-8
2-86147-2
86147-8
86147-1
1-86147-2
1-86147-0
Part Nos.
Loose Piece2
86182-7
86182-2
1-86182-5
86182-9
2-86182-9
2-86182-5
1-86182-8
2-86182-2
86182-8
86182-1
1-86182-2
1-86182-0
1
Packaging quantity of 20,000 per reel.
Packaging quantity of 1,000 per bag.
Note: Strip form posts applied with Insertion Machine No. 3-457382-1, includes power unit and applicator.
2
312
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Engineering Notes
7
313
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod I Headers, Straight Post, Keyed, .031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers
1.00
[2.54] Typ. Keyway
See chart
for locations
.250±.010
[6.35±0.25]
.125
[3.18]
C
.156±.003
±.003
A spaces @ [3.96±0.08] = B [±0.08]
.031±.001
[0.79±0.03] Typ.
Photo 110972
7
.085
[2.16] Max.
.063±.002
[1.60±0.05]
Material and Finish:
.062
[1.57]
Housing—Black thermoplastic, 94V-0
rated
Posts— Brass, plated as follows:
Plating A—Selectively plated .000030
[0.00076] gold on contact area, with
gold flash over .000050 [0.00127] min.
nickel on entire post
Plating B—.000100-.000200
[0.00254-0.00508] bright tin-lead over
.000030 [0.00762] nickel on entire post
.405±.010
[10.29±0.25]
.250±.010
[6.35±0.25]
.125±.010
[3.18±0.25]
.035
[0.89]
.031
[0.79]
+.000
.040-.015
Typ.
+0.00
[1.02±0.38]
Related Product Data:
Mate with
Board Mount Receptacles—pages 303
& 304
Board Mount Receptacle Assemblies—
pages 305-307
Crimp Snap-In Receptacles and
Housings—pages 308-310
Locking Clip Contacts & Housings—
pages 317 & 318 (see page 317 for
recommended post length).
Performance Specifications—page
324
Technical Documents (page 324):
.312±.003
[7.92±0.08]
.156±.003
[3.96±0.08]
.125 [3.18]
.055±.003
[1.40±0.08]
Dia.
Recommended Board Layout
Keyway Locations
(Ref only)
No. of
Pos.
Dimensions
A
B
Post Height
D=.405 [10.29]
Post Height
D=.587 [14.91]
C
No. of
Keying
Slots
Plating A
Plating B
Plating A
Plating B
Keyway
Locations
2
1
.156 [3.96]
.267 [6.78]
1
85829-2
87160-4
87247-2
87262-2
3
2
.312 [7.92]
.423 [10.74]
1
85829-3
87160-5
87247-3
87262-3
A
A
4
3
.468 [11.89]
.579 [14.71]
2
85829-4
87160-6
87247-4
87262-4
A,C
5
4
.624 [15.85]
.735 [18.67]
2
85829-5
87160-1
87247-5
87262-5
A,D
6
5
.780 [19.81]
.891 [22.63]
3
85829-6
87160-7
87247-6
87262-6
A,C,E
7
6
.936 [23.77]
1.047 [26.59]
3
85829-7
87160-8
87247-7
87262-7
A,C,E,
8
7
1.092 [27.74]
1.203 [30.56]
4
85829-8
87160-9
87247-8
87262-8
A,C.E,G
9
8
1.248 [31.70]
1.359 [34.52]
3
85829-9
1-87160-0
87247-9
87262-9
10
9
1.404 [35.66]
1.515 [38.48]
5
1-85829-0
1-87160-1
1-87247-0
1-87262-0
A,D,G
11
10
1.560 [39.62]
1.671 [42.44]
4
1-85829-1
1-87160-2
1-87247-1
1-87262-1
A,D,G,K
12
11
1.716 [43.59]
1.827 [46.41]
6
1-85829-2
1-87160-3
1-87247-2
1-87262-2
A,C,E,G,J,L
13
12
1.872 [47.55]
1.983 [50.37]
4
1-85829-3
87160-2
1-87247-3
1-87262-3
A,D,J,M
14
13
2.028 [51.51]
2.139 [54.33]
7
1-85829-4
1-87160-4
1-87247-4
1-87262-4
A,C,E,G,J,L,N
15
14
2.184 [55.47]
2.295 [58.29]
5
1-85829-5
1-87160-5
1-87247-5
1-87262-5
A,D,G,K,N
16
15
2.340 [59.44]
2.451 [62.26]
8
1-85829-6
1-87160-6
1-87247-6
1-87262-6
A,C,E,G,J,L,N,Q
17
16
2.496 [63.40]
2.607 [66.22]
6
1-85829-7
1-87160-7
1-87247-7
1-87262-7
A,D,G,K,N,R
18
17
2.652 [67.36]
2.763 [70.18]
7
1-85829-8
1-87160-8
1-87247-8
1-87262-8
A,D,F,J,M,P,S
19
18
2.808 [71.32]
2.919 [74.14]
8
1-85829-9
1-87160-9
1-87247-9
1-87262-9
B,D,F,J,L,N,Q,S
20
19
2.964 [75.29]
3.075 [78.11]
10
2-85829-0
2-87160-0
2-87247-0
2-87262-0
A,C,E,G,J,L,N,Q,S,U
21
20
3.120 [79.25]
3.231 [82.07]
7
2-85829-1
2-87160-1
2-87247-1
2-87262-1
A,D,G,K,N,R,U
22
21
3.276 [83.21]
3.387 [86.03]
11
2-85829-2
2-87160-2
2-87247-2
2-87262-2
A,C,E,G,J,L,N,Q,S,U,W
23
22
3.432 [87.17]
3.543 [89.99]
8
2-85829-3
2-87160-3
2-87247-3
2-87262-3
A,D,G,K,N,R,U,X
24
23
3.588 [91.14]
3.699 [93.95]
12
2-85829-4
2-87160-4
2-87247-4
2-87262-4
A,C,E,G,J,L,N,Q,S,U,W,Y
25
24
3.744 [95.10]
3.855 [97.92]
11
2-85829-5
2-87160-5
2-87247-5
2-87262-5
A,C,E,H,K,M,Q,S,U,W,Y
A,C,E,G,J
314
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod I Headers, Straight Post, Keyed,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
Dimensions
Post Height
D=.750 [19.05]
No. of
Keying
Slots
Plating A
.267 [6.78]
1
.423 [10.74]
1
.468 [11.89]
.579 [14.71]
4
.624 [15.85]
5
.780 [19.81]
6
7
No. of
Pos.
A
2
1
.156 [3.96]
3
2
.312 [7.92]
4
3
5
6
7
8
B
C
Post Height
D=1.187 [30.15]
Plating B
Plating A
85923-2
85875-7
87283-2
85923-3
85875-8
87283-3
2
85923-4
85875-1
87283-4
.735 [18.67]
2
85923-5
85875-2
.891 [22.63]
3
85923-6
85875-9
.936 [23.77]
1.047 [26.59]
3
85923-7
1.092 [27.74]
1.203 [30.56]
4
85923-8
Plating B
Post Height
D=1.310 [33.27]
Keyway
Locations
Plating A
Plating B
—
85839-2
85840-2
86207-2
85839-3
85840-3
A
86207-9
85839-4
85840-4
A,C
87283-5
86207-3
85839-5
85840-5
A,D
87283-6
—
85839-6
85840-6
A,C,E
1-85875-0
87283-7
—
85839-7
85840-7
A,C,E,
1-85875-1
87283-8
—
85839-8
85840-8
A,C,E,G
A
9
8
1.248 [31.70]
1.359 [34.52]
3
85923-9
85875-3
87283-9
—
85839-9
85840-9
10
9
1.404 [35.66]
1.515 [38.48]
5
1-85923-0
1-85875-2
1-87283-0
—
1-85839-0
1-85840-0
A,D,G
11
10
1.560 [39.62]
1.671 [42.44]
4
1-85923-1
1-85875-3
1-87283-1
—
1-85839-1
1-85840-1
A,D,G,K
12
11
1.716 [43.59]
1.827 [46.41]
6
1-85923-2
85875-4
1-87283-2
—
1-85839-2
1-85840-2
A,C,E,G,J,L
13
12
1.872 [47.55]
1.983 [50.37]
4
1-85923-3
1-85875-4
1-87283-3
—
1-85839-3
1-85840-3
A,D,J,M
14
13
2.028 [51.51]
2.139 [54.33]
7
1-85923-4
1-85875-5
1-87283-4
—
1-85839-4
1-85840-4
A,C,E,G,J,L,N
15
14
2.184 [55.47]
2.295 [58.29]
5
1-85923-5
1-85875-6
1-87283-5
—
1-85839-5
1-85840-5
A,D,G,K,N
16
15
2.340 [59.44]
2.451 [62.26]
8
1-85923-6
1-85875-7
1-87283-6
—
1-85839-6
1-85840-6
A,C,E,G,J,L,N,Q
17
16
2.496 [63.40]
2.607 [66.22]
6
1-85923-7
1-85875-8
1-87283-7
—
1-85839-7
1-85840-7
A,D,G,K,N,R
18
17
2.652 [67.36]
2.763 [70.18]
7
1-85923-8
1-85875-9
1-87283-8
—
1-85839-8
1-85840-8
A,D,F,J,M,P,S
19
18
2.808 [71.32]
2.919 [74.14]
8
1-85923-9
2-85875-0
1-87283-9
—
1-85839-9
1-85840-9
B,D,F,J,L,N,Q,S
20
19
2.964 [75.29]
3.075 [78.11]
10
2-85923-0
2-85875-1
2-87283-0
—
2-85839-0
2-85840-0
A,C,E,G,J,L,N,Q,S,U
21
20
3.120 [79.25]
3.231 [82.07]
7
2-85923-1
2-85875-2
2-87283-1
—
2-85839-1
2-85840-1
A,D,G,K,N,R,U
22
21
3.276 [83.21]
3.387 [86.03]
11
2-85923-2
2-85875-3
2-87283-2
—
2-85839-2
2-85840-2
A,C,E,G,J,L,N,Q,S,U,W
23
22
3.432 [87.17]
3.543 [89.99]
8
2-85923-3
85875-5
2-87283-3
—
2-85839-3
2-85840-3
A,D,G,K,N,R,U,X
24
23
3.588 [91.14]
3.699 [93.95]
12
2-85923-4
2-85875-4
2-87283-4
—
2-85839-4
2-85840-4
A,C,E,G,J,L,N,Q,S,U,W,Y
25
24
3.744 [95.10]
3.855 [97.92]
11
2-85923-5
2-85875-5
2-87283-5
—
2-85839-5
2-85840-5
A,C,E,H,K,M,Q,S,U,W,Y
7
A,C,E,G,J
315
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Mod I Headers, Right-Angle Post, Keyed, .031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers
C
.031±.001
Typ.
[0.79±0.03]
Photo 110973
7
Material and Finish:
Housing – Black thermoplastic, 94V-0
rated
Posts – Brass, plated as follows:
Plating A – Selectively plated .000030
[0.00076] gold on contact area, with
gold flash over .000050 [0.00127]
nickel on entire post
Plating B – .000015 [0.00038] gold
over .000050 [0.00127] nickel on entire
post
Plating C – .000100-.000200
[0.00254-0.00508] bright tin-lead over
.000050 [0.00127] nickel on entire post
See Table
for Locations
.345±.010
[8.76±0.25]
A Spaces @ 1.56 = B
[3.96]
.062±.001
[1.57±0.03]
.100
Typ. Keyway
[2.54]
.275±.015
[6.99±0.38]
.250±.010
[6.35±0.25]
.125
[3.18]
+.000
.040-.015
+0.00 2 Plc.
[1.02-0.38]
.031
[0.79]
.312±.003
[7.92±0.08]
.156±.003
[3.96±0.08]
E
.078±.002
[1.98±0.05]
Dia.
Recommended Board Layout
E Dimension
.345 [8.76] Post Height
.250 [6.35] for mounting header flush
with board edge; .595 [15.11] for
supporting mating connector on board.
.500 [12.70] Post Height
.250 [6.35] for mounting header flush
with board edge; .750 [19.05] for
supporting mating connector on board.
.131
[3.33]
Keyway Locations
(Ref Only)
Related Product Data:
Mate with
Board Mount Receptacles—pages 303
& 304
Board Mount Receptacle Assemblies—
pages 305-307
Crimp Snap-In Receptacles and
Housings—pages 308-310
Locking Clip Contacts and Housings—
pages 317 & 318 (see page 317 for
recommended post length).
Performance Specifications—page
324
Technical Documents (page 324):
.125±.010
[3.18±0.25]
No. of
Pos.
A
Dimensions
B
Post Height
D=.345 [8.76]
Post Height
D=.500 [12.70]
C
No. of
Keying
Slots
Plating A
Plating C
Plating B
Plating C
Keyway
Locations
2
1
.156 [3.96]
.267 [6.78]
1
87654-2
87655-2
87258-2
87194-1
3
2
.312 [7.92]
.423 [10.74]
1
87654-3
87655-3
87258-3
87194-2
A
A
4
3
.468 [11.89]
.579 [14.71]
2
87654-4
87655-4
87258-4
87194-3
A,C
5
4
.624 [15.85]
.735 [18.67]
2
87654-5
87655-5
87258-5
87194-4
A,D
6
5
.780 [19.81]
.891 [22.63]
3
87654-6
87655-6
87258-6
87194-5
A,C,E
7
6
.936 [23.77]
1.047 [26.59]
3
87654-7
87655-7
87258-7
87194-6
A,C,E
8
7
1.092 [27.74]
1.203 [30.56]
4
87654-8
87655-8
87258-8
87194-7
A,C,E,G
9
8
1.248 [31.70]
1.359 [34.52]
3
87654-9
87655-9
87258-9
87194-8
A,D,G
10
9
1.404 [35.66]
1.515 [38.48]
5
1-87654-0
1-87655-0
1-87258-0
87194-9
A,C,E,G,J
11
10
1.560 [39.62]
1.671 [42.44]
4
1-87654-1
1-87655-1
1-87258-1
1-87194-0
A,D,G,K
12
11
1.716 [43.59]
1.827 [46.41]
6
1-87654-2
1-87655-2
1-87258-2
1-87194-1
A,C,E,G,J,L
13
12
1.872 [47.55]
1.983 [50.37]
4
1-87654-3
1-87655-3
1-87258-3
1-87194-2
A,D,J,M
14
13
2.028 [51.51]
2.139 [54.33]
7
1-87654-4
1-87655-4
1-87258-4
1-87194-3
A,C,E,G,J,L,N,
15
14
2.184 [55.47]
2.295 [58.29]
5
1-87654-5
1-87655-5
1-87258-5
1-87194-4
A,D,G,K,N
16
15
2.340 [59.44]
2.451 [62.26]
8
1-87654-6
1-87655-6
1-87258-6
1-87194-5
A,C,E,G,J,L,N,Q
17
16
2.496 [63.40]
2.607 [66.22]
6
1-87654-7
1-87655-7
1-87258-7
1-87194-6
A,D,G,K,N,R
18
17
2.652 [67.36]
2.763 [70.18]
7
1-87654-8
1-87655-8
1-87258-8
1-87194-7
A,D,F,J,M,P,S
19
18
2.808 [71.32]
2.919 [74.14]
8
1-87654-9
1-87655-9
1-87258-9
1-87194-8
B,D,F,J,L,N,Q,S
20
19
2.964 [75.29]
3.075 [78.11]
10
2-87654-0
2-87655-0
2-87258-0
1-87194-9
A,C,E,G,J,L,N,Q,S,U
21
20
3.120 [79.25]
3.231 [82.07]
7
2-87654-1
2-87655-1
2-87258-1
2-87194-0
A,D,G,K,N,R,U
22
21
3.276 [83.21]
3.387 [86.03]
11
2-87654-2
2-87655-2
2-87258-2
2-87194-1
A,C,E,G,J,L,N,Q,S,U,W
23
22
3.432 [87.17]
3.543 [89.99]
8
2-87654-3
2-87655-3
2-87258-3
2-87194-2
A,D,G,K,N,R,U,X
24
23
3.588 [91.14]
3.699 [93.95]
12
2-87654-4
2-87655-4
2-87258-4
2-87194-3
A,C,E,G,J,L,N,Q,S,U,W,Y
25
24
3.744 [95.10]
3.855 [97.92]
11
2-87654-5
2-87655-5
2-87258-5
2-87194-4
A,C,E,H,K,M,Q,S,U,W,Y
316
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Locking Clip Contacts for .031 x .062 [0.79 x 1.57] Posts,
.031 x .062 [0.79 x 1.57] Centerline
Wire Crimp Contacts with
Insulation Support
Material and Finish:
Contact Body—Phosphor bronze,
plated as follows:
Plating A—Selectively plated .000015
[0.00038] gold on contact area, with
gold flash over .000050 [0.00127]
nickel on entire post
Plating B—.000100 [0.00254] min.
bright tin/lead over .000050 [0.00127]
nickel on entire contact
Contact Spring—Stainless steel
Related Product Data:
Mate with
Machine Applied Posts—page 312
Headers (.500 Post Height Only)—
pages 314-316
(see recommended post length below)*
Housings used in—page 318
Application Tooling—pages 319323
Performance Specification—page
324
Technical Documents (page 324):
Spring
Body
Mating Post
7
Wire Size
Range
AWG [mm2]
22-18 [0.3-0.9]
Contact Part Nos.
Ins. Dia.
Range
Finish
.050-.0100 [1.27–2.54]
Plating A
Plating B
Strip Form
Loose Piece
87269-2
87269-1
87278-2
87278-1
Applicator
Wire Size
Range
AWG [mm2]
22-18 [0.3-0.9]
Part
Number
Type
466007-2
466950-2
HDM
SCA
Premium
CERTI-CRIMP
Hand Tool
Part Number
Used With
Machine
Model "K" (AMP-O-LECTRIC)1
Stripper/Crimper (AMP-O-MATIC)
90308-1
1AMP-O-LECTRIC
KII Machine. Applicators also available for AMPOMATOR Lead Making Machines. Consult Tyco
Electronics.
Note: These contacts must be crimped in accordance with Tyco Electronics Specification No. 114-25008 in order to
function properly in a connector housing.
Extraction Tool Part No. 91104-1 is used for removing individual contacts from connector housings and for detaching
contacts from mating posts.
Photo 110999
Extraction Tool
Part No. 91104-1
Wire Harnessing
Instruction Sheet 408-7678
If necessary, wires can be
grouped with cable ties
and secured to a panel
with fixed clamps.
However, locking clip
contacts must be free to
float within the connector
housings to allow proper
extraction. Therefore,
harnessing hardware or the
use of multiple terminations
per contact must not
restrict the free-floating
action of contacts in the
housing. For more
information, request
Insulating and Bundling
Products Catalog 124132.
Fixed
Clamp
Cable
Tie
Unrestricted
Wire for
Free-Floating
Contacts
.281/.344* [7.14/8.74]
(without housing)
.370/.433* [9.40/11.00]
(with housing)
*Dimension defines .031 x .062 [0.79 x 1.57] portion of post.
If post is longer than maximum specified, post tip may butt against wire ends.
317
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Locking Clip Connector Housings, .031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers
C
A
B
.110
[2.79] Min.
Typ.
Photo 110975
7
Material and Finish:
.220
[5.59]
Black thermoplastic, 94V-0 rated
Related Product Data
Contacts used with—page 317
Mate with
Machine Applied Posts—page 312
Headers—pages 314-316 (see page
317 for recommended post length)
.060
[1.52]
.860
[21.84]
.031 x .062
[0.79 x 1.57]
Post
(Ref only)
Performance Specifications—page
324
Technical Documents (page 324):
.433/.370
[11.00/9.40]
.194
[4.93]
.110
[2.79]
Typ.
.156
[3.96]
Typ.
No. of
Pos.
1
2
3
3 of 4
4
4 of 5
5
5 of 6
6
6 of 7
7
8
9
10
11
12
A
—
—
.156 [3.96]
Dimensions
B
—
—
.156 [3.96]
C
.200 [5.08]
.376 [9.55]
.532 [13.51]
.156 [3.96]
.312 [7.92]
.688 [17.48]
.312 [7.92]
.312 [7.92]
.844 [21.44]
.312 [7.92]
.468 [11.89] 1.000 [25.40]
.468 [11.89] .468 [11.89] 1.156 [29.36]
.468 [11.89]
.624 [15.85]
.624 [15.85]
.780 [19.81]
.780 [19.81]
.624 [15.85]
.624 [15.85]
.780 [19.81]
.780 [19.81]
.936 [23.77]
1.312 [33.32]
1.468 [37.29]
1.624 [41.25]
1.780 [45.21]
1.936 [49.17]
Housing Part Nos.
UnKeyed
Keyed
87270-1
—
87270-2
—
1-87270-3
—
—
87270-3
87270-4
—
—
1-87270-0
1-87270-4
—
—
1-87270-2
87270-5
—
—
1-87270-1
1-87270-5
—
87270-6
—
1-87270-6
—
87270-7
—
1-87270-7
—
87270-8
—
Keyed Positions
on Mating Face
—
—
—
■■ ■ ■
—
■■■ ■■
—
■■■■ ■■
—
■ ■ ■ ■ ■ ■■
—
—
—
—
—
—
■ Indicates "closed cavity". No post entry hole in this position.
Notes: 1. All housings listed above will accept Locking Clip Contacts No. 87269 and 87278, refer to page 317
2. Refer to Tyco Electronics Instruction Sheet 408-7676 for proper contact orientation within the housings.
318
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Application Tooling
For Crimp Snap-In
Receptacles and Locking
Clip Contacts
Interchangeable applicators
for crimping products reeled
side-by-side on single or
dual carrier strips (primarily
closed-barrel terminals and
open-barrel contacts).
Similar design as the endfeed version. All side-feed
applicators include a wire
stop to help correctly position the wire end in the
crimping target area.
For more information, request
Instruction Sheet 408-8040.
AMP-O-LECTRIC Model “G”
Terminating Machines,
354500-1, -9, -11
Semiautomatic bench
machines for crimping
reeled terminals and
contacts, featuring a quiet
and reliable direct motor
drive, microprocessor
controls for ease of setup
and operation, and guarding and lighting designed
for operator convenience
and safety. All models are
equipped with either
manual or automatic precision adjustment of crimp
height. Machine-mounted
sensors are available for
crimp quality monitoring
using conventional miniature-style applicators.
Specifications
AMPOMATOR CLS IV+
Lead-Making Machines,
356500-1, -2, 1213400-1, -2
Fully-automatic machines
that measure, cut, strip and
terminate single leads.
Microprocessor-controlled,
and programmed and operated using an easy-tofollow, menu-driven
touchscreen. Features
include direct-drive terminating units with precision
crimp height adjustment,
fully programmable setups,
wire runout and splice
detection, and motorized
pre-feed with wire straightener. Crimp quality monitoring is also available.
Specifications
Side-Feed Heavy-Duty
Miniature Applicators
(coded HDM)
7
Width—18.7-25.3 [475-643]
depending on applicator type
Depth—21.5-28.1 [546-713]
depending on applicator type
Height—20 [508]
Weight—240 lb [110 kg]
Electrical—120 or 220 VAC, 50 or
60 Hz; 310 VA
Air—90-110 psi [6.21-7.59 bar],
6 scfm [0.00282 m3/s] when
required with air-feed applicators
Wire Range—26-10 AWG
[0.12-6 mm2] solid or stranded,
depending on product applied
For more information, request
Catalog 65828, Video 198116,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
Width—159 [4 040]
Depth—68 [1 730]
Height—86 [2 185] with
24 [610] dia. reel
Weight—2 000 lb [907 kg]
Electrical—220 VAC, 50 or
60 Hz, single phase, 25 A, with
neutral and ground
Air—90 psi [6.21 bar], 15 scfm
[0.0071 m3/s] sustained
Wire Range—26-10 AWG
[0.12-6 mm2] stranded, 26-16 AWG
[0.12-1.4 mm2] solid
Lead Lengths—3-90
[76.2-2 285], 90-1 000
[2 285-25 400] with long lead
conveyors
For more information, request
Catalog 124324, Video 198142
(NTSC), 199609 (PAL).
Note: For additional tooling options, contact Tyco Electronics or reference the Tyco web site.
319
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Application Tooling (Continued)
For Crimp Snap-In
Receptacles and Locking
Clip Contacts (Continued)
AMP-O-MATIC StripperCrimper Machines,
854040-3, -4
Semiautomatic bench
crimping machines that also
strip the wire, and are therefore used for terminating
jacketed cable. Feature
manual precision adjustment of crimp height, keyed
strip blades for faster, more
accurate setups, and an
efficient scrap removal
system. All adjustments can
be made from the front of
the machines without
special tools. Available with
crimp quality monitoring.
Specifications
Stripper-Crimper
Applicators (coded SCA)
Interchangeable applicators
for crimping products in
AMP-O-MATIC StripperCrimper Machines. Consist
of separate ram and lower
tooling assemblies. Similar
dial-in settings for different
wire sizes and insulation
diameters as HDM applicators. Available with sensors
for use with the Crimp
Quality Monitor.
For more information, request
Catalog 65004 (AMP-O-MATIC
Stripper-Crimper Machines),
Catalog 82275 [Crimp Quality
Monitor (CQM)].
Kappa 235, Automatic Cut
and Strip, 3-547178-1
The Kappa 235 has the
capability of processing
wires with a cross section of
up to 4 AWG and an
outside diameter of 0.59
inch. Options include an
inner conductor processing
kit for multiconductor
cables and a flat ribbon
cable kit.
Specifications
7
Width—14 [355]
Depth—18 [457]
Height—33 [838] without reel
Weight—150 lb [68 kg]
Electrical—120 VAC, 50 or
60 Hz, .5 A
Air—80-100 psi [5.52-6.90 bar],
3.5 scfm [0.00165 m3/s]
Wire Range—32-14 AWG
[0.03-2 mm2]
For more information, request
Catalog 65004, Video 198075,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
Width—25 [630]
Depth—16 [490]
Height—13.4 [370]
Weight—95 lb [44 kg]
Wire Cross-Sections—
24-4 AWG [0.22-25 mm2]
Flat Ribbon Cables—width up
to 40mm
Length Range—0.04”-328ft
[1mm - 99.99m] (+/- 0.2%)
Electrical—110/230 V 50/60Hz, switches automatically
For more information, request
Catalog 1307776.
Note: For additional tooling options, contact Tyco Electronics or reference the Tyco Electronics web site.
320
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Application Tooling (Continued)
For Crimp Snap-In
Receptacles and Locking
Clip Contacts (Continued)
CERTI-CRIMP Straight
Action Hand Tools (SAHT)
Premium grade hand tools.
Feature ratchet control to
provide complete crimp
cycle. Die sets close in a
straight line. Include a
contact locator and wire
stop, plus an insulation
crimp adjustment lever,
when applicable.
Approximate weight 1.3 lb
[0.59 kg]
For more information, request
Catalog 65780.
7
PRO-CRIMPER II
Hand Tool
Commercial grade hand
tool for crimping various
products. Features ratchet
control to provide complete
crimp cycle. Accepts both
pinned- and shoulderedstyle die sets. Locators are
provided with pinned-style
die sets for proper contact
and wire positioning, and to
help minimize contact
rotation and bending during
crimping. Approximate
weight 1.3 lb [0.60 kg].
For more information, request
Catalog 82276, Instruction Sheet
408-9930.
Note: For additional tooling options, contact Tyco Electronics or reference the Tyco Electronics web site.
321
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Application Tooling (Continued)
For Board Mount
Receptacles and Machine
Applied Posts
Modular Insertion System
(MIS) Bench Machines,
217600 Series,
662820 Series (shown)
7
For Board Mount Receptacles
Bench machines for inserting a variety of products
into pc boards. Uses the
same interchangeable
insertion heads as the
Comp-U-Sertor II Machines.
Series 217600 machines
feature a manually-operated
X-Y positioning fixture, plus
a locator spotlight. The
machine cycles when the
board hole is placed on the
anvil and both triggers on
the dual handles attached
to the X-Y fixture are
depressed. Series 662820
machines, without board
fixturing, cycle automatically when the hole is properly located. A stabilizing
disk over the anvil helps
keep the board level.
Specifications
Width—18 [457]
Depth—24 [610]
Height—18 [457]
Weight—250 lb [113 kg]
Electrical—120 to 220 VAC,
50 or 60 Hz (217600); 120 or
240 VAC, 60 Hz, single phase,
120 VA (662820)
Air—80 psi [5.52 bar] min.,
15 scfm [0.00708 m3/s] min.
Insertable Area—18 x 22
[457 x 559] max.
For more information, request
Catalog 296059.
This benchtop insertion
machine installs contacts
into PC boards at rates to
2000 per hour. A spotlight
highlights the insertion
area, and lower tooling
assures precise board
location. The machine is
activated by a foot pedal.
Comp-U-Sertor II
Machines, 122300-1, -2
Microprocessor-controlled
X-Y positioning table for
inserting a variety of products into pc boards, including .0252 stamped or
bandoliered posts, minispring sockets, and
FASTON tabs. Insertion
heads for the different products are interchangeable,
and may also be used with
bench machines.
Controlled, programmed
and operated using an
interactive touchscreen.
Options include doubleaction clinch tooling,
powered dereeler, splice
run-out detector, take-up
winder for paper tape, and
scrap chopper.
Specifications
Width—58 [1 473]
Depth—66 [1 676] with reel
Height—63 [1 600]
Weight—500 lb [227 kg]
Electrical—120 VAC, 50 or 60 Hz
(122300-1); 220 VAC, 50 or 60 Hz
(122300-2); 1 800 VA
Air—80 psi [5.52 bar] min.,
15 scfm [0.00708 m3/s] min.
Insertable Area—12 x 18
[305 x 457] max.
For more information, request
Catalog 296059.
Note: For additional tooling options, contact Tyco Electronics or reference the Tyco Electronics web site.
322
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Application Tooling (Continued)
For Board Mount
Receptacles and Machine
Applied Posts (Continued)
P300 Automatic Insertion
Machine
Automatic machine for
inserting a variety of
contacts into pc boards
(PCBs). Equipped with an
insertion tool (comprised of
a product-specific insertion
head, an anvil, and a
product feed mechanism).
Stepper-motor driven X-Y
table positions PCBs under
insertion head. Surface
Mount Equipment
Manufacturers Association
(SMEMA) compatible inline
PCB Insertion Station for
posts, tabs, receptacles or
sockets. Stand-alone unit is
field upgradeable to Pass
Through. Mounts up to four
AMP pneumatic insertion
heads. Modem diagnostics
standard, vision system
optional. Control panel used
to program and monitor
entire insertion process.
Specifications
Width—57.5 [1 460]
Depth—64.5 [1 640]
Height—60 [1 520]
Weight—Depending on
configuration
Electrical—110 V, 60 Hz
Air—87 psi [6 bar]
Insertable Area—24 x 16
[600 x 400]
For more information, contact Tyco
Electronics.
7
323
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
AMPMODU Interconnection System
Performance Specifications
The electrical, mechanical
and environmental characteristics of the AMPMODU
.031 x .062 [0.79 x 1.57]
Interconnection System are
listed below:
7
Mechanical Characteristics
Contact Durability:
Plating
.000016 [0.00041] Min. Tin
.000079 [0.00201] Min. Tin
.000100 [0.00254] Min. Bright Tin/Lead
.000015 [0.00038] Gold
.000030 [0.00076] Gold
Receptacles
Standard
High
Pressure
Pressure
75 Cycles
25 Cycles
75 Cycles
25 Cycles
N/A
N/A
75 Cycles
50 Cycles
200 Cycles
100 Cycles
Locking
Clip
Contacts
N/A
N/A
25 Cycles
25 Cycles
N/A
Electrical Characteristics
Connector Durability
Contact Current Rating:
5 amperes max. for single contact in
free air, could vary due to ambient
temperature, wire size and duty cycles.
Contact Resistance:
12 milliohms at 100 ma and 50 mv
open circuit.
Dielectric Rating:
At Sea Level – 1200 VAC between
contacts on .156 [3.96] centers for 1
minute.
Insulation Resistance: 5 x 103 megohms
(initial)
Receptacles
Mating – 16 oz. [4.45N] max. per contact after 3 mating cycles
(standard pressure)
–30 oz. [8.34N] max. per contact after 3 mating cycles
(high pressure, gold)
–60 oz. [16.68N] max. per contact after 3 mating cycles (high pressure, tin)
Unmating – 1 oz. [0.28N] min. per contact after 3 mating cycles (standard pressure)
3 oz. [0.83N] min. per contact after 3 mating cycles (high pressure)
Locking Clip Contacts
Mating – 4 lb. [17.79N] max. per contact after 3 mating cycles
Unmating – 2 lb. [8.90N] min. per contact after 3 mating cycles
Environmental Characteristics
Operating Temperature: -65°C to 105°C [-85°F to 221°F] (Gold Plated)
-65°C to 60°C [-85°F to 140°F] (Tin Plated)
Technical Documents
Various technical documents are available for your
use:
Product Specifications
describe technical performance characteristics and
verification tests. They are
intended for the Design,
Component and Quality
Engineer.
108-25016 Interconnection System,
Standard Pressure
108-25025 Interconnection System,
High Pressure, Gold
108-25025-1 Interconnection System,
High Pressure, Tin
108-36029 Locking Clip Connectors
Application Specifications
describe requirements for
using the product in its
intended application and/or
crimping information. They
are intended for the
Packaging and Design
Engineer and the Machine
Setup Person.
114-25000 Crimp Snap-In Receptacle
Contacts
114-25004 Board Mount Receptacle
Contacts
114-25008 Locking Clip Contacts
114-25011 Machine Applied Straight
Posts
Instruction Sheets provide
instructions for assembling
or applying the product.
They are intended for the
Manufacturing Assembler
or Operator.
408-7308 Clinching Procedures for
Header Assemblies
408-7411 Suggestions for Wave
Soldering AMPMODU
Receptacles
408-7594 AMP Hand Tool 90274-2
for Crimping Crimp SnapIn 18-22 AWG Contacts
408-7750 AMP Hand Tool 90328-1
for Crimping Crimp SnapIn Contacts (22-26 AWG)
408-7676 AMPMODU Locking Clip
Connectors and Contacts
408-7671 AMP Hand Tool 90308-1
for Crimping Locking Clip
Contacts
408-7678 AMP Extraction Tool
91104-1 for Locking Clip
Contacts
408-7981 Clinching Procedures for
Receptacle Assemblies
408-9451 AMP Extraction Tool
843473-1 for Crimp
Snap-In Receptacles
324
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
