AMPMODU Interconnection System
Level V IDC Connectors, .125 x .125 [3.18 x 3.18] Centerline
Product Facts
■
Termination of discrete
wire sizes 26-22 AWG
[0.12-0.3 mm2] as well as
jacketed cable and bonded
ribbon cable (conductors
separated)
■
Connectors stackable endto-end and side-to-side on
.125 [3.18] centers
■
Connectors preloaded with
insulation displacement
receptacle contacts
■
Contact design employs
dual cantilever beams,
redundant insulation
displacement slots, built-in
post stop and wire support
crimp
■
Copper alloy contacts are
duplex plated
■
Snap-on covers with or
without cable tie paddles
■
Full line of mass
termination tooling offers
lowest installed costs for
most production needs
■
R
■
Certified by Canadian
Standards
Association,
File No. LR 7189
R
Covers can be furnished
with and without a cable tie
paddle. The covers are
simply snapped onto a
housing after the connector
has been terminated.
The receptacle contacts
feature the Tyco Electronics
insulation displacement
crimp technique for
achieving top quality, low
cost terminations. These
contacts employ dual
cantilever beams for
redundant interface with a
mating post, an integral
post stop to limit post
mating depth and protect
the crimp termination, and
a wire support (strain relief)
crimp to prevent accidental
wire pull-out. The contacts
are made of high
conductivity copper alloy
and are duplex plated.
Performance
Characteristics
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.)
Durability — Ref. Product
Specification 108-25028
(Interconnection System, Insulation
Displacement Connector, IDC Level)
.125 [3.18] x .125 [3.18]
Centerline
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
AMPMODU Level V IDC
connectors provide cost
effective discrete wire
connections that are
compatible with today's
telecommunications
packaging techniques.
These connectors are
designed to mate with .025
[0.64] sq. posts on .125 x
.125 [3.18 x 3.18] centers
and are comprised of
double-row housings
preloaded with insulation
displacement receptacle
contacts, snap-on
hermaphroditic covers, and
a full line of mass termination
tooling to meet virtually
every production need. For
modular flexibility, connectors
can be stacked end-to-end
or side-to-side, maintaining
a .125 x .125 [3.18 x 3.18]
centerline spacing.
Application Specification
114-25020 (Interconnection System,
IDC Level V, Application of)
6
279
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Receptacle Assemblies, Double-Row, .125 x .125 [3.18 x 3.18] Centerline
Housings Preloaded with
Insulation Displacement
Crimp Receptacle Contacts
.800
[20.32]
Material and Finish
.298
[7.57]
Housing — Black thermoplastic, flame
retardant
Contacts — Copper alloy, duplex
plated .000050 [0.00127] gold on
contact area, .000100 [0.00254] min.
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
A
Note: Preloaded contacts accept max.
insulation dia. of .050 [1.27]. The minimum point of contact, as measured from
front edge of housing, is .095 [2.41].
.059
[1.50]
B
.243
[6.17]
Technical Documents —
.125
[3.18]
pages 277, 278
.125
Typ.
[3.18]
.125 [3.18] x .125 [3.18]
Centerline
Product Specification
108-25028
Application Specification
114-25020
Receptacle assemblies can be
stacked end-to-end and side-toside on .125 x .125 [3.18 x 3.18]
centers.
6
Dimensions
No. of
Pos.
A
B
8
10
12
16
20
24
30
32
40
.493 [12.52]
.618 [15.70]
.743 [18.87]
.993 [25.22]
1.243 [31.57]
1.493 [37.92]
1.868 [47.45]
1.993 [50.62]
2.493 [63.32]
.375 [9.52]
.500 [12.70]
.625 [15.88]
.875 [22.23]
1.125 [28.58]
1.375 [34.93]
1.750 [44.45]
1.875 [47.63]
2.375 [60.33]
Receptacle Assembly (Stamped1)
for 26-22 AWG
[0.12-0.3 mm2] Wire
102935-4
102935-6
102935-8
1-102935-2
1-102935-6
1-102935-9
1-102935-3
2-102935-8
3-102935-6
White ink stamped, one side—8- thru 12-position with AMP and arrow; 14- and 16-position with AMP, part no., and
arrow; 18- thru 40-position with AMP, part no., date code and arrow.
1
Notes: 1. Covers for these housings are shown on pages 281 & 282.
2. Termination tooling for these connectors are shown on page 273-275.
3. 14- and 18-position receptacle assemblies, as well as other sizes, can be made available upon request.
Consult Tyco Electronics.
Note: All part numbers are RoHS compliant.
280
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Hermaphroditic Covers for Level V IDC Receptacle Assemblies,
Double-Row, .125 x .125 [3.18 x 3.18] Centerline
All covers illustrated here
and on the following page
can be used on the doublerow Level V IDC connectors
shown on page 280.
.603
[15.32]
.603
[15.32]
.125
[3.18]
Typ.
.125
[3.18]
Typ.
Material
Black thermoplastic, flame retardant,
94V-0 rated
A
A
Cover 103056 Series
without Cable Tie Paddle
Cover 103058 Series
with Cable Tie Paddle
.100
[2.54]
(2 Plc.)
Cable Tie
Paddle
Cable Tie
Paddle
C
.605
[15.37]
B
.125
Typ.
[3.18]
.605
[15.37]
.125
[3.18]
Typ.
D
A
A
Cover 103349 Series
with Wide Cable Tie Paddle
No. of
Pos.
(Housing
Size)
8
10
12
16
20
24
32
40
64
Cover 103350 Series
with Wide Cable Tie Paddle
and Polarization
Dimensions
A
.491 [12.47]
.616 [15.65]
.741 [18.82]
.991 [25.17]
1.241 [31.52]
1.491 [37.87]
1.991 [50.57]
2.491 [63.27]
.125 [3.18] x .125 [3.18]
Centerline
1.105
[28.07]
B
C
.150 [3.81]
—
—
.300 [7.62]
.300 [7.62]
—
.600 [15.24]
.750 [19.05]
.285 [7.24]
—
—
.592 [15.04]
.592 [15.04]
—
1.312 [33.32]
1.820 [46.23]
D
Without
Cable Tie
Paddle
E
Cover Part Nos.
With
With Wide With Wide
Cable Tie
Cable Tie
Cable Tie
Paddle
Paddle
Paddle and
Polarization
.166 [4.22]
.125 [3.18]
—
—
—
.125 [3.18]
—
103058-3
—
.200 [5.08]
—
103058-4
.416 [10.57]
—
—
—
.541 [13.74]
—
—
—
—
.400 [10.16]
1-103056-0 1-103058-0
.916 [23.27]
—
—
—
1.166 [29.61]
—
—
—
See page 282 for Double Cable Tie Paddle versions.
103349-4
—
—
103349-1
103349-5
—
103349-2
103349-3
6
103350-4
—
—
103350-1
103350-5
—
103350-2
103350-3
Notes: 1. Two hermaphroditic covers of any style can be installed on a double-row connector housing.
2. Other sizes can be made available upon request.
Note: All part numbers are RoHS compliant.
281
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Hermaphroditic Covers for Level V IDC Receptacle Assemblies,
Double-Row, .125 x .125 [3.18 x 3.18] Centerline (Continued)
.100
[2.54]
Typ.
1.312
Typ.
[33.32]
.603
[15.32]
.125
Typ.
[3.18]
.600
Typ.
[15.24]
Cable Tie Paddle
3.991
[101.37]
1.103
[28.02]
.125 [3.18] x .125 [3.18]
Centerline
Cover Part No. 104583-1, 64-Position
with Double Cable Tie Paddle
.100
[2.54]
Typ.
1.312
Typ.
[33.32]
.603
[15.32]
.125
Typ.
[3.18]
6
.600
Typ.
[15.24]
.916
[23.27]
Cable Tie Paddle
3.991
[101.37]
1.103
[28.02]
Cover Part No. 104584-1, 64-Position
with Double Cable Tie Paddle
and Polarization
Note: All part numbers are RoHS compliant.
282
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System
Product Facts
■
Rugged connector system
featuring .031 x .062
[0.79 x 1.57] posts with
mating receptacles
■
Current rating 5 amps max
per contact. Varies due to
ambient temperature, wire
size and duty cycles.
■
Available for board-to-board
and wire-to-board
applications
■
Posts available on strip
for machine application
directly to pc board or in
housings for board
mounting
■
Receptacles available for
board mounting or wire
crimping
■
Contacts available in both
tin and gold plating
■
Flame retardant
thermoplastic housings
94V-0 rated
■
Locking Clip contacts
available to mate with
.031 x .062 [0.79 x 1.57]
posts
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
■
R
Board mounted receptacles
and receptacle assemblies
are available in various
geometries, offering
packaging interconnections
that include perpendicular,
parallel and stacking
capabilities. Machine
applied terminations,
through matched
application equipment,
are geared to virtually any
production requirement,
assuring the lowest possible
applied cost.
Crimp snap-in receptacles
for 26-18 AWG [0.12 –
0.9mm2] wire provide
excellent discrete wire
terminations. Housings for
these contacts provide for
ease of handling
terminations in high density
applications.
AMPMODU mating posts
are supplied typically as
header assemblies. They are
available in various sizes to
meet the interconnection
and packaging requirements
of your system. However, in
instances where packaging
configurations do not
lend themselves to the
economies of assemblies,
Tyco Electronics can
provide for the discrete
location of individual posts
and receptacles.
Mod I 0.031 x 0.062
Interconnection System
Certified by Canadian
Standards
Association,
File No. LR 16455
The .031 x .062 [0.79 x 1.57]
interconnection system
has served as an industry
standard for modular
packaging for over three
decades. It is a rugged,
large scale system
designed for board-to-board
and board-to-wire or cable
applications that has offered
millions of reliable
interconnections and
countless mating cycles.
This versatile interconnection
system successfully meets
the requirements for most
modular power supply
packaging.
If your interconnections
require Top Entry, Bottom
Entry and/or Side Entry for
perpendicular, parallel and
stacked configurations, the
.031 x .062 [0.79 x 1.57]
interconnection system can
fulfill your needs with the
lowest applied cost through
efficient interconnections
and supporting application
equipment.
7
283
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System (Continued)
Locking Clip
Contacts
(Page 298)
Standard Profile
Housing, Unkeyed
for Crimp Snap-In
Receptacles
(Page 291 & 292)
Locking Clip
Connector
(Page 299)
Header, Right-Angle
Post, Keyed
(Page 297)
Board Mount
Receptacles,
Horizontal
and Vertical
Styles
(Pages 285 & 286)
Straight Posts
Machine Applied
(Page 294)
Straight Posts
Machine Applied
(Page 294)
Board Mount
Receptacle
Assembly,
Vertical
(Page 287)
Header, Straight Post
(Pages 295 & 296)
Header, Right-Angle
Post, Keyed
(Page 297)
Board Mount
Receptacle
Assembly,
Horizontal
(Pages 288 & 289)
Header, Right-Angle
Post, Keyed
(Page 297)
Low Profile
Housing, Keyed
(Page 293)
Receptacles,
Crimp Snap-In
(Page 290)
Mod I 0.031 x 0.062
Interconnection System
Rugged-self supporting, onepiece contact body
Wide entry for post to
receptacle
misalignment
Reliability-dual
cantilever spring
contact design
and built-in
anti-overstress
7
Offers high or low
contact forces
Wide
Misalignment
Tolerance
Cantilever
Beams
Anti-overstress
The AMPMODU receptacle
cross-section is primarily
rectangular, with rounded
corners. Two integral
cantilever beams contact
the mating square or
rectangular posts.
Deflection of these spring
members is limited by antioverstress and excessive
permanent deformation is
prevented. This feature
allows a wide range of
tolerances for misalignment
of mating contacts.
The configuration of the
receptacle completely
encloses the spring
members preventing
damage during handling
and assembly and makes
the system compatible with
automatic application
techniques.
This design also permits
the use of the receptacles
without housings or
encapsulation.
Note: Application of a
contact lubricant is part of
the manufacturing process
of all AMPMODU tin-plated
crimp products. However,
it is not part of the
manufacturing process of
products that customers will
solder, then clean. For these
products, Tyco Electronics
recommends that customers
purchase a contact
lubricant. (See application
specification 114-25004 for
further information.)
Insulation Support
Barrel
Wire Crimp Receptacle
284
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Mod I Receptacles, Board Mount, .031 x .062 [0.79 x 1.57] Centerline
Vertical and Horizontal
Board Mount
Receptacle Styles
.093
[0.99] Max.
.093
[0.99] Max.
.125
[3.18] Max.
.125
[3.18] Max.
.300
[7.62]
.300
[7.62]
Bottom
Post Entry
Type A
.093
[2.36] Max.
Top
Post Entry
Type B
.125
[3.18] Max.
.300
[7.62]
Horizontal
Post Entry
Type C
Related Product Data
Recommended Board Layout for Receptacle Assemblies
and Individual Receptacles (Type A and B)
±.003
2J [±0.08]
Mod I Receptacles,
Board Mount
Recommended Board Layout for
Type C — page 288
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Application Tooling —
pages 300-304
Performance Specifications —
page 305
.100
[2.54] Min.
±.003
J [±0.08]
Technical Documents —
.055
[1.40]
Min.
page 305
.125±.002
[3.18±0.05]
.125
[3.18]
Keying Plug
7
Round Hole
(Post Entry Type A or B)
Part No. 86181-2
Use in Board Mount Receptacles
J-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .150 [3.81]; for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board. For solder mask, see
Tyco Electronics Instruction Sheet 408-7411.
Note: Drawings depict normal use of the contact in a one or two-sided circuit board. When using plated thru-holes,
refer to Tyco Electronics Engineering Report ER-001 and Tyco Electronics Instruction Sheet 408-7411. For solder
mask, see Tyco Electronics Instruction Sheet 408-7411.
Note: All part numbers are RoHS compliant.
285
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Mod I Receptacles, Board Mount, .031 x .062 [0.79 x 1.57] Centerline (Continued)
Material and Finish
Copper alloy, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000079 [0.00201] min.
tin on entire contact
Plating C — (Solder Resist) —
.000030 [0.00076] gold over .000050
[0.00127] nickel on contact area,
.000500 [0.01270] aluminum on inside
area of solder tines; remainder of contact
unfinished
.210
[5.33]
.010
[0.25]
Max.
Standard Pressure
Receptacle
Type
Board
Thickness
Range
Dimension
T
(Ref. Pg. 285 )
A
.070-.055 [1.78-1.40]
.112 [2.84]
B
.070-.055 [1.78-1.40]
.112 [2.84]
C
.103-.055 [2.62-1.40]
.145 [3.68]
High Pressure
Receptacle
Standard Pressure
Part Nos.
Strip Form Loose Piece
Plating A
86477-2
86480-2
Plating B
86477-3
—
Plating C (Solder Resist)
87772-2
—
Plating A
87003-1
87105-1
Plating B
87003-2
—
Plating C (Solder Resist)
87774-2
—
Plating A
85487-4
85493-4
Plating B
85487-3
—
Finish
.020
[0.51]
Max.
.210
[5.33]
High Pressure
Part Nos.
Strip Form Loose Piece
—
—
87316-3
—
—
—
—
—
—
—
—
—
86432-8
86434-6
86432-1
86434-1
Insertion
Applicator No. for
“U” Frame Machine
466376-1
466376-1
466376-1
466376-1
466376-1
466376-1
565967-3
Mod I Receptacles,
Board Mount
Notes: 1. All strip form parts in packaged quantities of 5,000 each.
2. All loose piece parts in packaged quantities of 500 each.
7
Note: All part numbers are RoHS compliant.
286
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Mod I Receptacle Assemblies, Vertical Board Mount,
.031 x .062 [0.79 x 1.57] Centerline
.046
[1.17]
Contact
Area
Single Row .156 [3.96]
Centerline
.182
[4.62]
The letter A
stamped on
contact indicates
mating end of
receptacle.
.018
[0.46]
X-X
B ±.015
[±0.38]
Material and Finish
A
Housing — Black thermoplastic, 94V-0
rated
Contacts — Copper alloy, plated as
follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000079 [0.00201] min.
tin on entire contact
Plating C — (Solder Resist) —
.000030 [0.00076] gold over .000050
[0.00127] nickel on contact area,
.000500 [0.01270] aluminum on inside
area of solder tines; remainder of contact
unfinished
Related Product Data
Technical Documents —
page 305
.175±.007
[4.45±0.18]
X
No.
of
Pos.
A
B
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
.156 [3.96]
.312 [7.92]
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
.312 [7.92]
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.120 [79.25]
Dimensions
X
+.010
.112-.000
+0.25
[2.84±0.00]
.300±.003
[7.62±0.08]
Type A
Type B
Standard Pressure
High Pressure
Standard Pressure
Plating A Plating B Plating C Plating B Plating A Plating B Plating C
87984-2
87983-2
87989-2
87993-2
87986-2
87985-2
87990-2
87984-3
87983-3
87989-3
87993-3
87986-3
87985-3
87990-3
87984-4
87983-4
87989-4
87993-4
87986-4
87985-4
87990-4
87984-5
87983-5
87989-5
87993-5
87986-5
87985-5
87990-5
87984-6
87983-6
87989-6
87993-6
87986-6
87985-6
87990-6
87984-7
87983-7
87989-7
87993-7
87986-7
87985-7
87990-7
87984-8
87983-8
87989-8
87993-8
87986-8
87985-8
87990-8
87984-9
87983-9
87989-9
87993-9
87986-9
87985-9
87990-9
1-87984-0 1-87983-0 1-87989-0 1-87993-0 1-87986-0 1-87985-0 1-87990-0
1-87984-1 1-87983-1 1-87989-1 1-87993-1 1-87986-1 1-87985-1 1-87990-1
1-87984-2 1-87983-2 1-87989-2 1-87993-2 1-87986-2 1-87985-2 1-87990-2
1-87984-3 1-87983-3 1-87989-3 1-87993-3 1-87986-3 1-87985-3 1-87990-3
1-87984-4 1-87983-4 1-87989-4 1-87993-4 1-87986-4 1-87985-4 1-87990-4
1-87984-5 1-87983-5 1-87989-5 1-87993-5 1-87986-5 1-87985-5 1-87990-5
1-87984-6 1-87983-6 1-87989-6 1-87993-6 1-87986-6 1-87985-6 1-87990-6
1-87984-7 1-87983-7 1-87989-7 1-87993-7 1-87986-7 1-87985-7 1-87990-7
1-87984-8 1-87983-8 1-87989-8 1-87993-8 1-87986-8 1-87985-8 1-87990-8
1-87984-9 1-87983-9 1-87989-9 1-87993-9 1-87986-9 1-87985-9 1-87990-9
2-87984-0 2-87983-0 2-87989-0 2-87993-0 2-87986-0 2-87985-0 2-87990-0
Mod I Receptacles,
Vertical Board Mount
Recommended Board Layout —
page 288
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
.156
Typ.
[3.96]
7
Keying Plug
Part No. 86181-2
(Use in Board Mount
Receptacles)
Post Entry
Type A
Post Entry
Type B
Note: All part numbers are RoHS compliant.
287
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Mod I Receptacle Assemblies, Horizontal Board Mount,
.031 x .062 [0.79 x 1.57] Centerline
Single Row .156 [3.96]
Centers
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Contacts — Copper alloy, plated as
follows:
Plating A — Selectively plated
.000030 [0.00076] gold contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000079 [0.00201] min.
tin on entire contact
.018
[0.46]
.046
[1.17]
Contact
Area
.182
[4.62]
The letter A stamped
on contact indicates
mating end of receptacle.
X-X
B ±.015
[±0.38]
A
.156
[3.96] Typ.
.333±.010
[8.46±0.25]
.145
[3.68]
Post Entry
Type C
.175±.007
[4.45±0.18]
Related Product Data
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
X
.300±.003
[7.62±0.08]
X
Technical Documents —
page 305
Mod I Receptacles,
Horizontal Board Mount
Recommended Board
Layouts for Receptacle
Assemblies and Individual
Receptacles (Type C)
±.003
H [±0.08]
±.003
2H [±0.08]
±.003
2H [±0.08]
.055±.005
[1.40±0.13]
.340
[ +.005
-.000 ]
Keying Plug
[ +.005
-.000 ]
±.003
H [±0.08]
.100
[2.54]
Max.
+.005
.340
-.000
[8.64+0.13]
[
[8.64+0.13]
.073±.003
[1.85±0.08]
Typ. Dia.
.073±.003
[1.85±0.08]
Typ. Dia.
This configuration recommended
for use with machine applied posts
or headers with a .345 [18.76]
minimum mating end post length.*
This configuration recommended
for use with machine applied posts
or headers with a .500 [12.70]
minimum mating end post length.*
.073±.003
[1.85±0.08]
Typ. Dia.
7
±.003
H [±0.08]
.340
[8.64+0.13]
This configuration recommended
for use with machine applied posts
or headers with a .405 [10.29]
minimum mating end post length.*
±.003
2H [±0.08]
The mating post length is depicted by the A dimension on page 294 (machine applied posts) and the C dimension on
pages 295-297 (headers).
H-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .125 [3.18] for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board.
Part No. 86181-2
(Use in Board Mount
Receptacles)
Note: All part numbers are RoHS compliant.
288
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
]
AMPMODU Interconnection System
Mod I Receptacle Assemblies, Horizontal Board Mount,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
No. of
Pos.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Dimensions
A
B
.156 [3.96]
.312 [7.92]
.312 [7.92]
.468 [11.89]
.468 [11.89]
.624 [15.85]
.624 [15.85]
.780 [19.81]
.780 [19.81]
.936 [23.77]
.936 [23.77]
1.092 [27.74]
1.092 [27.74]
1.248 [31.70]
1.248 [31.70]
1.404 [35.66]
1.404 [35.66]
1.560 [39.62]
1.560 [39.62]
1.716 [43.59]
1.716 [43.59]
1.872 [47.55]
1.872 [47.54]
2.028 [51.51]
2.028 [51.51]
2.184 [55.47]
2.184 [55.47]
2.340 [59.44]
2.340 [59.44]
2.496 [63.40]
2.496 [63.40]
2.652 [67.36]
2.652 [67.36]
2.808 [71.32]
2.808 [71.32]
2.964 [75.29]
2.964 [75.29]
3.120 [79.25]
Standard Pressure
Plating A
Plating B
87988-2
87987-2
87988-3
87987-3
87988-4
87987-4
87988-5
87987-5
87988-6
87987-6
87988-7
87987-7
87988-8
87987-8
87988-9
87987-9
1-87988-0
1-87987-0
1-87988-1
1-87987-1
1-87988-2
1-87987-2
1-87988-3
1-87987-3
1-87988-4
1-87987-4
1-87988-5
1-87987-5
1-87988-6
1-87987-6
1-87988-7
1-87987-7
1-87988-8
1-87987-8
1-87988-9
1-87987-9
2-87988-0
2-87987-0
High Pressure
Plating B
87995-2
87995-3
87995-4
87995-5
87995-6
87995-7
87995-8
87995-9
1-87995-0
1-87995-1
1-87995-2
1-87995-3
1-87995-4
1-87995-5
1-87995-6
1-87995-7
1-87995-8
1-87995-9
2-87995-0
Mod I Receptacles,
Horizontal Board Mount
7
Note: All part numbers are RoHS compliant.
289
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Mod I Receptacles, Crimp Snap-In (Wire Applied),
.031 x .062 [0.79 x 1.57] Centerline
Material and Finish
Copper alloy, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000016 [0.00041] min.
tin on entire contact
Related Product Data
Housings used in — pages 291-293
Mate with Machine Applied
Posts — page 294
Headers — pages 295-297
Application Tooling — page 300-304
Performance Specification —
page 305
.125
[3.18] Max.
.580
[14.73]
.280
[7.11]
Technical Documents —
.093
[2.36]
Max.
page 305
.014
[0.36]
Max.
Wire Size Range
AWG [mm2]
Ins. Dia.
Range
Finish
22-18 [0.3-0.9]
.051-.090 [1.30–2.29]
Plating A
Plating B
Standard Pressure
Strip Form
Loose Piece
Packaged
Part
Packaged
Part
Quantities
Nos.
Quantities
Nos.
5,000
102099-2
500
102103-2
5,000
102099-5
500
102103-3
.210
[5.33]
Applicator (Standard Pressure)
Wire Size Range
AWG [mm2]
Standard Pressure
Receptacle
22-18
[0.3-0.9]
Part
Number
Type
Used With
Machine
466764-3
466764-2
466764-1
466937-1
HDM
HDM
HDM
SCA
Model "G" (AMP-O-LECTRIC)
Model "K" (AMP-O-LECTRIC)
CLS IV+ (AMPOMATOR)
Stripper-Crimper (AMP-O-MATIC)
Premium
CERTI-CRIMP
Hand Tool
Part Number
90274-2
AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines and
Stripper/Crimper Machines. Consult Tyco Electronics.
Mod I Receptacles,
Crimp Snap-In
.020
[0.51]
Max.
.210
[5.33]
7
Wire Size Range
AWG [mm2]
Ins. Dia.
Range
22-18 [0.3-0.9]
.051-.090 [1.30–2.29]
26-22 [0.12-0.4]
0.42-.073 [1.07-1.85]
Finish
Plating A
Plating B
Plating A
Plating B
High Pressure
Strip Form
Loose Piece
Packaged
Part
Packaged
Part
Quantities
Nos.
Quantities
Nos.
5,000
102100-2
500
102104-2
5,000
102100-5
500
102104-3
5,000
102102-2
500
102106-2
5,000
102102-5
500
102106-3
Applicator (High Pressure)
High Pressure Receptacle
Wire Size Range
AWG [mm2]
22-18 [0.3-0.9]
26-22 [0.12-0.4]
Extraction Tool Part No. 843473-1
Part Instruction Sheet 408-9451
Part
Number
Type
466764-3
466764-2
466764-1
466937-1
466763-2
466763-1
HDM
HDM
HDM
SCA
HDM
HDM
Used With
Machine
Premium
CERTI-CRIMP
Hand Tool
Part Number
Model "G" (AMP-O-LECTRIC)
Model "K" (AMP-O-LECTRIC)
CLS IV+ (AMPOMATOR)
Stripper-Crimper (AMP-O-MATIC)
Model "K" (AMP-O-LECTRIC)
CLS IV+ (AMPOMATOR)
90274-2
90328-1
AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines and
Stripper/Crimper Machines. Consult Tyco Electronics.
Note: All part numbers are RoHS compliant.
290
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Mod I Receptacle Housings, Standard Profile, Unkeyed,
.031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers, Without Strain
Relief
.030±.010
[0.76±0.25]
Identifiers on ends of
housing are optional at
AMP’s discretion
.790
[20.07]
±.015
L [±0.38]
Material
Black thermoplastic, flame retardant,
94V-0 rated
.077
[1.96]
.250
[6.35] Max.
Y
.120
[3.05] Typ.
Related Product Data
Contacts used with — page 290
Mate with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
Locking Ledge
Identification
Y
.156
[3.96] Typ.
Y-Y
.156±.003
±.003
A spaces @ [3.96±0.08] = B [±0.08]
Technical Documents —
page 305
No. of
Pos.
Dimensions
B
.156 [3.96]
.312 [7.92]
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.744 [95.10]
L
.312 [7.92]
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.120 [79.25]
3.900 [99.06]
Housing Part Nos.
Unstamped2
Stamped1
—
2-87025-5
—
2-87025-1
—
1-87025-3
—
2-87025-3
87025-1
87025-2
—
3-87025-4
—
1-87025-6
87025-9
1-87025-0
1-87025-7
1-87025-8
—
3-87025-6
1-87025-1
1-87025-2
—
3-87025-0
—
3-87025-8
—
3-87025-2
—
2-87025-0
—
4-87025-0
—
87025-4
—
87025-6
—
87025-8
—
5-87025-0
Mod I Receptacle
Housings
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
25
A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
24
7
Notes: 1Markings on housing.
2No markings on housing.
Note: All part numbers are RoHS compliant.
291
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Mod I Receptacle Housings, Standard Profile, Unkeyed,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
Single Row, .156 [3.96]
Centers, With Strain Relief
.992
[25.20]
.206±.020
[5.23±0.51]
.290
[7.37]
.040
[1.02]
.694
[17.63]
.397
[10.08]
.446
[11.33] .298 [7.57]
.094
[2.39] Dia.
4 Plc.
.843
[21.41]
Material
Black thermoplastic, flame retardant,
94V-0 rated
1.640
[41.66]
Related Product Data
Contacts used with — page 290
Mate with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
1.560
[39.62]
Technical Documents —
10 Position Receptacle Housing, Part No. 1-102090-0
Mod I Receptacle
Housings
page 305
7
Note: All part numbers are RoHS compliant.
292
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Mod I Receptacle Housings, Low Profile, Keyed,
.031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers
Identifiers on ends of
housing are optional at
AMP’s discretion
.030±.010
[0.76±0.25]
Locking Ledge
Identification
.640
[16.26]
.125
[3.18]
.040
[1.02]
.075
[1.91] Typ.
±.015
L [±0.38]
.077
[1.96]
Material
Black thermoplastic, flame retardant,
94V-0 rated
.250
[6.35] Max.
.120
[3.05] Typ.
.156
[3.96] Typ.
Related Product Data
Contacts used with — page 290
Mate with —
Headers — pages 295-297
Performance Specifications —
page 305
.156±.003
±.003
A spaces @ [3.96±0.08] = B [±0.08]
B
L
No. of
Keys
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
25
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
24
.156 [3.96]
.312 [7.92]
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.744 [95.10]
.312 [7.92]
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.120 [79.25]
3.900 [99.06]
1
1
2
2
3
3
4
3
5
4
6
4
7
5
8
6
6
8
10
11
Technical Documents —
1No
Housing Part Nos.
(Unstamped)1
87159-3
87159-4
87159-5
87159-1
87159-6
87159-7
87159-8
87159-9
1-87159-0
1-87159-1
1-87159-2
87159-2
1-87159-3
1-87159-4
1-87159-5
1-87159-6
1-87159-7
1-87159-8
1-87159-9
2-87159-4
Key
Locations
A
A
A,C
A,D
A,C,E
A,C,E
A,C,E,G
A,D,G
A,C,E,G,J
A,D,G,K
A,C,E,G,J,L
A,D,J,M
A,C,E,G,J,L,N
A,D,G,K,N
A,C,E,G,J,L,N,Q
A,D,G,K,N,R
A,D,F,J,P,S
B,D,F,J,L,N,Q,S
A,C,E,G,J,L,N,Q,S,U
A,C,E,H,K,M,Q,S,U,W,Y
Mod I Receptacle
Housings
A
page 305
Keying Plug
Dimensions
No. of
Pos.
marking on housing.
Keying Plug References
Material — Natural Color Nylon
Wire Exit Face
Wire Exit Face
7
.160
[4.06]
.050
[1.27]
Fits
through
.125 [3.18]
Dia. Hole
Part No. 87116-2
Post
Mating Face
Keying Plug
87116-2
(Flush)
For Standard Housings
Post
Mating Face
Keying Plug
87116-2
(Flush)
For Low Profile Housings
Note: All part numbers are RoHS compliant.
293
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Mod I Posts, Machine Applied, .031 x .062 [0.79 x 1.57] Centerline
Straight Posts
.150 Cut Off
[3.81]
±.003
2D [±0.08]
.062
[1.57]
±.003
D [±0.08]
.150
[3.81]
E
.080
[2.03]
.048
[1.22]
A
B
.078±.002 Dia.
[1.98±0.05]
(Drilled Hole)
Typical Assembly
.031
[0.78]
C
Recommended Mounting Holes
Material and Finish
Brass, plated .000030 [0.00076] gold
over .000050 [0.00127] nickel on entire
post
Related Product Data
Mate with —
Board Mount Receptacles —
pages 285, 286
Board Mount Receptacle
Assemblies — pages 287-289
Crimp Snap-In Receptacles and
Housings — pages 290-292
Locking Clip Contacts &
Housings — pages 298, 299 (see page
298 for recommended post length).
Application Tooling —
pages 300-304
Performance Specifications —
page 305
D—Post centers may vary depending on requirements. Minimum nominal
centerline spacing between adjacent contacts is .125 [3.18]; .003 [0.08]
tolerances not to accumulate over length of board.
E—Post center location from edge of board may vary to satisfy application.
A
Dimensions
B
C
.360 [9.14]
.187 [4.75]
.595 [15.11]
.380 [9.65]
.320 [8.13]
.748 [19.00]
.400 [10.16]
.125 [3.18]
.573 [14.55]
.480 [12.19]
.187 [4.75]
.715 [18.16]
.565 [14.35]
.187 [4.75]
.800 [20.32]
.800 [20.32]
.150 [3.81]
.998 [25.35]
Finish
Technical Documents —
Mod I Posts,
Machine Applied
page 305
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
Strip Form1
86147-7
5086147-2
1-86147-5
5086147-9
4-86147-2
3-5086147-7
1-86147-8
2-5086147-2
86147-8
5086147-1
1-86147-2
1-5086147-0
Part Nos.
Loose Piece2
86182-7
5086182-2
1-86182-5
5086182-9
2-86182-9
2-5086182-5
1-86182-8
2-5086182-2
86182-8
5086182-1
1-86182-2
1-5086182-0
Packaging quantity of 20,000 per reel.
Packaging quantity of 1,000 per bag.
Note: Strip form posts applied with Insertion Machine No. 3-457382-1, includes power unit and applicator.
1
2
7
Note: All part numbers are RoHS compliant.
294
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Mod I Headers, Straight Post, Keyed, .031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers
1.00
[2.54] Typ. Keyway
See chart
for locations
.250±.010
[6.35±0.25]
.125
[3.18]
C
.156±.003
±.003
A spaces @ [3.96±0.08] = B [±0.08]
.085
[2.16] Max.
.063±.002
[1.60±0.05]
.031±.001
[0.79±0.03] Typ.
Material and Finish
.062
[1.57]
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
min. nickel on entire post
Plating B — .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00762] nickel on entire post
.405±.010
[10.29±0.25]
.250±.010
[6.35±0.25]
.125±.010
[3.18±0.25]
.035
[0.89]
.031
[0.79]
+.000
.040-.015
Typ.
+0.00
[1.02±0.38]
Related Product Data
Mate with —
Board Mount Receptacles —
pages 285, 286
Board Mount Receptacle
Assemblies — pages 287-289
Crimp Snap-In Receptacles and
Housings — pages 290-292
Locking Clip Contacts &
Housings — pages 298 & 299 (see
page 298 for recommended post length).
Performance Specifications —
page 305
Technical Documents —
.312±.003
[7.92±0.08]
.156±.003
[3.96±0.08]
.125 [3.18]
.055±.003
[1.40±0.08]
Dia.
Recommended Board Layout
No. of
Pos.
Dimensions
A
B
C
Post Height
D=.405 [10.29]
No. of
Keying
Slots
Plating A
Plating B
Post Height
D=.587 [14.91]
Plating A
Plating B
Keyway
Locations
2
1
.156 [3.96]
.267 [6.78]
1
85829-2
5-87160-4
87247-2
5-87262-2
3
2
.312 [7.92]
.423 [10.74]
1
85829-3
5-87160-5
87247-3
5-87262-3
A
A
4
3
.468 [11.89]
.579 [14.71]
2
85829-4
5-87160-6
87247-4
5-87262-4
A,C
5
4
.624 [15.85]
.735 [18.67]
2
85829-5
5-87160-1
87247-5
5-87262-5
A,D
6
5
.780 [19.81]
.891 [22.63]
3
85829-6
5-87160-7
87247-6
5-87262-6
A,C,E
7
6
.936 [23.77]
1.047 [26.59]
3
85829-7
5-87160-8
87247-7
5-87262-7
A,C,E,
8
7
1.092 [27.74]
1.203 [30.56]
4
85829-8
5-87160-9
87247-8
5-87262-8
A,C,E,G
9
8
1.248 [31.70]
1.359 [34.52]
3
85829-9
6-87160-0
87247-9
5-87262-9
A,D,G
10
9
1.404 [35.66]
1.515 [38.48]
5
1-85829-0
6-87160-1
1-87247-0
6-87262-0
A,C,E,G,J
11
10
1.560 [39.62]
1.671 [42.44]
4
1-85829-1
6-87160-2
1-87247-1
6-87262-1
A,D,G,K
12
11
1.716 [43.59]
1.827 [46.41]
6
1-85829-2
6-87160-3
1-87247-2
6-87262-2
A,C,E,G,J,L
13
12
1.872 [47.55]
1.983 [50.37]
4
1-85829-3
5-87160-2
1-87247-3
6-87262-3
A,D,J,M
14
13
2.028 [51.51]
2.139 [54.33]
7
1-85829-4
6-87160-4
1-87247-4
6-87262-4
A,C,E,G,J,L,N
15
14
2.184 [55.47]
2.295 [58.29]
5
1-85829-5
6-87160-5
1-87247-5
6-87262-5
A,D,G,K,N
16
15
2.340 [59.44]
2.451 [62.26]
8
1-85829-6
6-87160-6
1-87247-6
6-87262-6
A,C,E,G,J,L,N,Q
17
16
2.496 [63.40]
2.607 [66.22]
6
1-85829-7
6-87160-7
1-87247-7
6-87262-7
A,D,G,K,N,R
18
17
2.652 [67.36]
2.763 [70.18]
7
1-85829-8
6-87160-8
1-87247-8
6-87262-8
A,D,F,J,M,P,S
19
18
2.808 [71.32]
2.919 [74.14]
8
1-85829-9
6-87160-9
1-87247-9
6-87262-9
B,D,F,J,L,N,Q,S
20
19
2.964 [75.29]
3.075 [78.11]
10
2-85829-0
7-87160-0
2-87247-0
7-87262-0
A,C,E,G,J,L,N,Q,S,U
21
20
3.120 [79.25]
3.231 [82.07]
7
2-85829-1
7-87160-1
2-87247-1
7-87262-1
A,D,G,K,N,R,U
22
21
3.276 [83.21]
3.387 [86.03]
11
2-85829-2
7-87160-2
2-87247-2
7-87262-2
A,C,E,G,J,L,N,Q,S,U,W
23
22
3.432 [87.17]
3.543 [89.99]
8
2-85829-3
7-87160-3
2-87247-3
7-87262-3
A,D,G,K,N,R,U,X
24
23
3.588 [91.14]
3.699 [93.95]
12
2-85829-4
7-87160-4
2-87247-4
7-87262-4
A,C,E,G,J,L,N,Q,S,U,W,Y
25
24
3.744 [95.10]
3.855 [97.92]
11
2-85829-5
7-87160-5
2-87247-5
7-87262-5
A,C,E,H,K,M,Q,S,U,W,Y
Mod I Headers
page 305
Keyway Locations
(Ref only)
7
Note: All part numbers are RoHS compliant.
295
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Mod I Headers, Straight Post, Keyed,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
Dimensions
Post Height
D=.750 [19.05]
Post Height
D=1.187 [30.15]
No. of
Keying
Slots
Plating A
Plating B
Plating A
.267 [6.78]
1
85923-2
5-85875-7
87283-2
.423 [10.74]
1
85923-3
5-85875-8
87283-3
.468 [11.89]
.579 [14.71]
2
85923-4
5-85875-1
87283-4
4
.624 [15.85]
.735 [18.67]
2
85923-5
5-85875-2
5
.780 [19.81]
.891 [22.63]
3
85923-6
5-85875-9
.936 [23.77]
1.047 [26.59]
3
85923-7
1.092 [27.74]
1.203 [30.56]
4
85923-8
No. of
Pos.
A
2
1
.156 [3.96]
3
2
.312 [7.92]
4
3
5
6
7
6
8
7
B
C
Plating B
Post Height
D=1.310 [33.27]
Keyway
Locations
Plating A
Plating B
—
85839-2
5-85840-2
5-86207-2
85839-3
5-85840-3
A
5-86207-9
85839-4
5-85840-4
A,C
87283-5
5-86207-3
85839-5
5-85840-5
A,D
87283-6
—
85839-6
5-85840-6
A,C,E
6-85875-0
87283-7
—
85839-7
5-85840-7
A,C,E,
6-85875-1
87283-8
—
85839-8
5-85840-8
A,C,E,G
A
8
1.248 [31.70]
1.359 [34.52]
3
85923-9
5-85875-3
87283-9
—
85839-9
5-85840-9
A,D,G
9
1.404 [35.66]
1.515 [38.48]
5
1-85923-0
6-85875-2
1-87283-0
—
1-85839-0
6-85840-0
A,C,E,G,J
11
10
1.560 [39.62]
1.671 [42.44]
4
1-85923-1
6-85875-3
1-87283-1
—
1-85839-1
6-85840-1
A,D,G,K
12
11
1.716 [43.59]
1.827 [46.41]
6
1-85923-2
5-85875-4
1-87283-2
—
1-85839-2
6-85840-2
A,C,E,G,J,L
13
12
1.872 [47.55]
1.983 [50.37]
4
1-85923-3
6-85875-4
1-87283-3
—
1-85839-3
6-85840-3
A,D,J,M
14
13
2.028 [51.51]
2.139 [54.33]
7
1-85923-4
6-85875-5
1-87283-4
—
1-85839-4
6-85840-4
A,C,E,G,J,L,N
15
14
2.184 [55.47]
2.295 [58.29]
5
1-85923-5
6-85875-6
1-87283-5
—
1-85839-5
6-85840-5
A,D,G,K,N
16
15
2.340 [59.44]
2.451 [62.26]
8
1-85923-6
6-85875-7
1-87283-6
—
1-85839-6
6-85840-6
A,C,E,G,J,L,N,Q
17
16
2.496 [63.40]
2.607 [66.22]
6
1-85923-7
6-85875-8
1-87283-7
—
1-85839-7
6-85840-7
A,D,G,K,N,R
18
17
2.652 [67.36]
2.763 [70.18]
7
1-85923-8
6-85875-9
1-87283-8
—
1-85839-8
6-85840-8
A,D,F,J,M,P,S
19
18
2.808 [71.32]
2.919 [74.14]
8
1-85923-9
7-85875-0
1-87283-9
—
1-85839-9
6-85840-9
B,D,F,J,L,N,Q,S
20
19
2.964 [75.29]
3.075 [78.11]
10
2-85923-0
7-85875-1
2-87283-0
—
2-85839-0
7-85840-0
A,C,E,G,J,L,N,Q,S,U
21
20
3.120 [79.25]
3.231 [82.07]
7
2-85923-1
7-85875-2
2-87283-1
—
2-85839-1
7-85840-1
A,D,G,K,N,R,U
22
21
3.276 [83.21]
3.387 [86.03]
11
2-85923-2
7-85875-3
2-87283-2
—
2-85839-2
7-85840-2
A,C,E,G,J,L,N,Q,S,U,W
23
22
3.432 [87.17]
3.543 [89.99]
8
2-85923-3
5-85875-5
2-87283-3
—
2-85839-3
7-85840-3
A,D,G,K,N,R,U,X
24
23
3.588 [91.14]
3.699 [93.95]
12
2-85923-4
7-85875-4
2-87283-4
—
2-85839-4
7-85840-4
A,C,E,G,J,L,N,Q,S,U,W,Y
25
24
3.744 [95.10]
3.855 [97.92]
11
2-85923-5
7-85875-5
2-87283-5
—
2-85839-5
7-85840-5
A,C,E,H,K,M,Q,S,U,W,Y
Mod I Headers
9
10
7
Note: All part numbers are RoHS compliant.
296
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Mod I Headers, Right-Angle Post, Keyed, .031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers
C
.031±.001 Typ.
[0.79±0.03]
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Posts — Brass, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Plating B — .000015 [0.00038] gold
over .000050 [0.00127] nickel on entire
post
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
.345±.010
[8.76±0.25]
A Spaces @ 1.56 = B
[3.96]
See Table
for Locations
.125±.010
[3.18±0.25]
.062±.001
[1.57±0.03]
.100 Typ. Keyway
[2.54]
.275±.015
[6.99±0.38]
.250±.010
[6.35±0.25]
.125
[3.18]
+.000
.040-.015
+0.00 2 Plc.
[1.02-0.38]
.031
[0.79]
.131
[3.33]
Related Product Data
Mate with —
Board Mount Receptacles —
pages 285, 286
Board Mount Receptacle
Assemblies — pages 287-289
Crimp Snap-In Receptacles and
Housings — pages 290-292
Locking Clip Contacts and
Housings — pages 298 & 299 (see
page 298 for recommended post length).
Performance Specifications —
page 305
.312±.003
[7.92±0.08]
.156±.003
[3.96±0.08]
E
.078±.002
[1.98±0.05]
Dia.
Recommended Board Layout
E Dimension
.345 [8.76] Post Height —
.250 [6.35] for mounting header flush
with board edge; .595 [15.11] for
supporting mating connector on board.
.500 [12.70] Post Height —
.250 [6.35] for mounting header flush
with board edge; .750 [19.05] for
supporting mating connector on board.
No. of
Pos.
A
Dimensions
B
C
Post Height
D=.345 [8.76]
No. of
Keying
Slots
Plating A
Plating C
Post Height
D=.500 [12.70]
Plating B
Plating C
Keyway
Locations
2
1
.156 [3.96]
.267 [6.78]
1
87654-2
5-87655-2
87258-2
5-87194-1
3
2
.312 [7.92]
.423 [10.74]
1
87654-3
5-87655-3
87258-3
5-87194-2
A
A
4
3
.468 [11.89]
.579 [14.71]
2
87654-4
5-87655-4
87258-4
5-87194-3
A,C
5
4
.624 [15.85]
.735 [18.67]
2
87654-5
5-87655-5
87258-5
5-87194-4
A,D
6
5
.780 [19.81]
.891 [22.63]
3
87654-6
5-87655-6
87258-6
5-87194-5
A,C,E
7
6
.936 [23.77]
1.047 [26.59]
3
87654-7
5-87655-7
87258-7
5-87194-6
A,C,E
8
7
1.092 [27.74]
1.203 [30.56]
4
87654-8
5-87655-8
87258-8
5-87194-7
A,C,E,G
9
8
1.248 [31.70]
1.359 [34.52]
3
87654-9
5-87655-9
87258-9
5-87194-8
A,D,G
10
9
1.404 [35.66]
1.515 [38.48]
5
1-87654-0
6-87655-0
1-87258-0
5-87194-9
A,C,E,G,J
11
10
1.560 [39.62]
1.671 [42.44]
4
1-87654-1
6-87655-1
1-87258-1
6-87194-0
A,D,G,K
12
11
1.716 [43.59]
1.827 [46.41]
6
1-87654-2
6-87655-2
1-87258-2
6-87194-1
A,C,E,G,J,L
13
12
1.872 [47.55]
1.983 [50.37]
4
1-87654-3
6-87655-3
1-87258-3
6-87194-2
A,D,J,M
14
13
2.028 [51.51]
2.139 [54.33]
7
1-87654-4
6-87655-4
1-87258-4
6-87194-3
A,C,E,G,J,L,N,
15
14
2.184 [55.47]
2.295 [58.29]
5
1-87654-5
6-87655-5
1-87258-5
6-87194-4
A,D,G,K,N
16
15
2.340 [59.44]
2.451 [62.26]
8
1-87654-6
6-87655-6
1-87258-6
6-87194-5
A,C,E,G,J,L,N,Q
17
16
2.496 [63.40]
2.607 [66.22]
6
1-87654-7
6-87655-7
1-87258-7
6-87194-6
A,D,G,K,N,R
18
17
2.652 [67.36]
2.763 [70.18]
7
1-87654-8
6-87655-8
1-87258-8
6-87194-7
A,D,F,J,M,P,S
19
18
2.808 [71.32]
2.919 [74.14]
8
1-87654-9
6-87655-9
1-87258-9
6-87194-8
B,D,F,J,L,N,Q,S
20
19
2.964 [75.29]
3.075 [78.11]
10
2-87654-0
7-87655-0
2-87258-0
6-87194-9
A,C,E,G,J,L,N,Q,S,U
21
20
3.120 [79.25]
3.231 [82.07]
7
2-87654-1
7-87655-1
2-87258-1
7-87194-0
A,D,G,K,N,R,U
22
21
3.276 [83.21]
3.387 [86.03]
11
2-87654-2
7-87655-2
2-87258-2
7-87194-1
A,C,E,G,J,L,N,Q,S,U,W
23
22
3.432 [87.17]
3.543 [89.99]
8
2-87654-3
7-87655-3
2-87258-3
7-87194-2
A,D,G,K,N,R,U,X
24
23
3.588 [91.14]
3.699 [93.95]
12
2-87654-4
7-87655-4
2-87258-4
7-87194-3
A,C,E,G,J,L,N,Q,S,U,W,Y
25
24
3.744 [95.10]
3.855 [97.92]
11
2-87654-5
7-87655-5
2-87258-5
7-87194-4
A,C,E,H,K,M,Q,S,U,W,Y
Mod I Headers
Technical Documents —
page 305
Keyway Locations
(Ref Only)
7
Note: All part numbers are RoHS compliant.
297
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Locking Clip Contacts for .031 x .062 [0.79 x 1.57] Posts,
.031 x .062 [0.79 x 1.57] Centerline
Wire Crimp Contacts with
Insulation Support
Material and Finish
Spring
Contact Body — Phosphor bronze,
plated as follows:
Plating A — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Plating B — .000100 [0.00254] min.
tin over .000050 [0.00127] nickel on
entire contact
Contact Spring — Stainless steel
Related Product Data
Mate with —
Machine Applied Posts — page 294
Headers (.500 Post Height Only) —
pages 295-297 (see recommended post
length below)*
Housings used in — page 299
Application Tooling —
pages 300-304
Performance Specification — page
305
Technical Documents —
page 305
Body
Mating Post
Wire Size
Range
AWG [mm2]
22-18 [0.3-0.9]
Wire Size
Range
AWG [mm2]
22-18 [0.3-0.9]
Finish
.050-.0100 [1.27–2.54]
Plating A
Plating B
Locking Clip Contacts
Instruction Sheet
408-7678
7
Strip Form
Loose Piece
87269-2
5-87269-1
87278-2
5-87278-1
Applicator
Part
Number
Type
466007-2
466950-2
HDM
SCA
Premium
CERTI-CRIMP
Hand Tool
Part Number
Used With
Machine
Model "K" (AMP-O-LECTRIC)1
Stripper/Crimper (AMP-O-MATIC)
90308-1
1AMP-O-LECTRIC
KII Machine. Applicators also available for AMPOMATOR Lead Making Machines. Consult
Tyco Electronics.
Note: These contacts must be crimped in accordance with Tyco Electronics Specification No. 114-25008 in order to
function properly in a connector housing.
Extraction Tool Part No. 91104-1 is used for removing individual contacts from connector housings and for detaching
contacts from mating posts.
Wire Harnessing
Extraction Tool
Part No. 91104-1
Contact Part Nos.
Ins. Dia.
Range
If necessary, wires can be
grouped with cable ties and
secured to a panel with
fixed clamps. However,
locking clip contacts must
be free to float within the
connector housings to
allow proper extraction.
Therefore, harnessing
hardware or the use of
multiple terminations per
contact must not restrict
the free-floating action of
contacts in the housing. For
more information, request
Insulating and Bundling
Products Catalog 124132.
Fixed
Clamp
Cable
Tie
Unrestricted
Wire for
Free-Floating
Contacts
.281/.344* [7.14/8.74]
(without housing)
.370/.433* [9.40/11.00]
(with housing)
*Dimension defines .031 x .062 [0.79 x 1.57] portion of post.
If post is longer than maximum specified, post tip may butt against wire ends.
Note: All part numbers are RoHS compliant.
298
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Locking Clip Connector Housings, .031 x .062 [0.79 x 1.57] Centerline
C
Single Row, .156 [3.96]
Centers
A
B
.110
[2.79] Min.
Typ.
Material and Finish
.220
[5.59]
Black thermoplastic, 94V-0 rated
Related Product Data
.060
[1.52]
Contacts used with — page 298
Mate with —
Machine Applied Posts — page 294
Headers — pages 295-297 (see page
298 for recommended post length)
Performance Specifications —
page 305
.860
[21.84]
.031 x .062
[0.79 x 1.57]
Post
(Ref only)
Technical Documents —
.433/.370
[11.00/9.40]
page 305
.194
[4.93]
.110
[2.79]
Typ.
No. of
Pos.
1
2
3
3 of 4
4
4 of 5
5
5 of 6
6
6 of 7
7
8
9
10
11
12
Note: All part numbers are RoHS
compliant.
A
—
—
.156 [3.96]
Dimensions
B
—
—
.156 [3.96]
C
.200 [5.08]
.376 [9.55]
.532 [13.51]
.156 [3.96]
.312 [7.92]
.688 [17.48]
.312 [7.92]
.312 [7.92]
.844 [21.44]
.312 [7.92]
.468 [11.89] 1.000 [25.40]
.468 [11.89] .468 [11.89] 1.156 [29.36]
.468 [11.89]
.624 [15.85]
.624 [15.85]
.780 [19.81]
.780 [19.81]
.624 [15.85]
.624 [15.85]
.780 [19.81]
.780 [19.81]
.936 [23.77]
1.312 [33.32]
1.468 [37.29]
1.624 [41.25]
1.780 [45.21]
1.936 [49.17]
Housing Part Nos.
UnKeyed
Keyed
87270-1
—
87270-2
—
1-87270-3
—
—
87270-3
87270-4
—
—
1-87270-0
1-87270-4
—
—
1-87270-2
87270-5
—
—
1-87270-1
1-87270-5
—
87270-6
—
1-87270-6
—
87270-7
—
1-87270-7
—
87270-8
—
Locking Clip
Connector Housing
.156
[3.96]
Typ.
Keyed Positions
on Mating Face
—
—
—
■ ■ ■■
■
—
■ ■ ■ ■■
■
—
■ ■ ■ ■ ■■
■
—
■ ■ ■ ■ ■■
■■
—
—
—
—
—
—
7
■Indicates "closed cavity". No post entry hole in this position.
Notes: 1. All housings listed above will accept Locking Clip Contacts No. 87269 and 87278, refer to page 298
2. Refer to Tyco Electronics Instruction Sheet 408-7676 for proper contact orientation within the housings.
299
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Application Tooling
Application Tooling
For Crimp Snap-In
Receptacles and Locking
Clip Contacts
Side-Feed Heavy-Duty
Miniature Applicators
(Coded HDM)
Interchangeable applicators
for crimping products reeled
side-by-side on single or
dual carrier strips (primarily
closed-barrel terminals and
open-barrel contacts).
Similar design as the endfeed version. All side-feed
applicators include a wire
stop to help correctly
position the wire end in the
crimping target area.
For more information, request
Instruction Sheet 408-8040.
AMP-O-LECTRIC Model “G”
Terminating Machines,
354500-1, -9, -11
Semiautomatic bench
machines for crimping
reeled terminals and
contacts, featuring a quiet
and reliable direct motor
drive, microprocessor
controls for ease of setup
and operation, and guarding
and lighting designed for
operator convenience and
safety. All models are
equipped with either manual
or automatic precision
adjustment of crimp height.
Machine-mounted sensors
are available for crimp
quality monitoring using
conventional miniature-style
applicators.
Specifications
AMPOMATOR CLS IV+
Lead-Making Machines,
356500-1, -2, 1213400-1, -2
Fully-automatic machines
that measure, cut, strip and
terminate single leads.
Microprocessor-controlled,
and programmed and
operated using an easy-tofollow, menu-driven
touchscreen. Features
include direct-drive
terminating units with
precision crimp height
adjustment, fully
programmable setups, wire
runout and splice detection,
and motorized pre-feed with
wire straightener. Crimp
quality monitoring is also
available.
7
Note: All part numbers are RoHS
compliant.
Width — 18.7-25.3 [475-643]
depending on applicator type
Depth — 21.5-28.1 [546-713]
depending on applicator type
Height — 20 [508]
Weight — 240 lb [110 kg]
Electrical — 120 or 220 VAC, 50
or 60 Hz; 310 VA
Air — 90-110 psi [6.21-7.59 bar],
6 scfm [0.00282 m3/s] when
required with air-feed applicators
Wire Range — 26-10 AWG
[0.12-6 mm2] solid or stranded,
depending on product applied
For more information, request
Catalog 65828, Video 198116,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
Specifications
Width — 159 [4 040]
Depth — 68 [1 730]
Height — 86 [2 185] with
24 [610] dia. reel
Weight — 2 000 lb [907 kg]
Electrical — 220 VAC, 50 or
60 Hz, single phase, 25 A, with
neutral and ground
Air — 90 psi [6.21 bar], 15 scfm
[0.0071 m3/s] sustained
Wire Range — 26-10 AWG
[0.12-6 mm2] stranded, 26-16 AWG
[0.12-1.4 mm2] solid
Lead Lengths — 3-90
[76.2-2 285], 90-1 000
[2 285-25 400] with long lead
conveyors
For more information, request
Catalog 124324, Video 198142
(NTSC), 199609 (PAL).
Note: For additional tooling options, contact Tyco Electronics or reference the Tyco Electronics web site.
300
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Application Tooling (Continued)
For Crimp Snap-In
Receptacles and Locking
Clip Contacts (Continued)
Semiautomatic bench
crimping machines that also
strip the wire, and are
therefore used for
terminating jacketed cable.
Feature manual precision
adjustment of crimp height,
keyed strip blades for faster,
more accurate setups, and
an efficient scrap removal
system. All adjustments can
be made from the front of
the machines without
special tools. Available with
crimp quality monitoring.
Specifications
Stripper-Crimper
Applicators (coded SCA)
Interchangeable applicators
for crimping products in
AMP-O-MATIC StripperCrimper Machines. Consist
of separate ram and lower
tooling assemblies. Similar
dial-in settings for different
wire sizes and insulation
diameters as HDM
applicators. Available with
sensors for use with the
Crimp Quality Monitor.
For more information, request
Catalog 65004 (AMP-O-MATIC
Stripper-Crimper Machines),
Catalog 82275 [Crimp Quality
Monitor (CQM)].
Kappa 235, Automatic Cut
and Strip, 3-547178-1
The Kappa 235 has the
capability of processing
wires with a cross section of
up to 4 AWG and an outside
diameter of 0.59 inch.
Options include an inner
conductor processing kit for
multiconductor cables and
a flat ribbon cable kit.
Specifications
Cosmic 927R
Micro-Cable Stripper
The Cosmic 927R
Micro-Cable Stripper was
developed to reliably strip
various insulation materials
and micro-cable. From
conductor diameter 36 AWG
to 10 AWG, the stripping
diameter display can be set
to within 0.1mm increments.
Thus optimal stripping
quality is guaranteed and
damage to the conductor is
eliminated.
Width—14 [355]
Depth—18 [457]
Height—33 [838] without reel
Weight—150 lb [68 kg]
Electrical—120 VAC, 50 or
60 Hz, .5 A
Air—80-100 psi [5.52-6.90 bar],
3.5 scfm [0.00165 m3/s]
Wire Range—32-14 AWG
[0.03-2 mm2]
For more information, request
Catalog 65004, Video 198075,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
Width—25 [630]
Depth—16 [490]
Height—13.4 [370]
Weight—95 lb [44 kg]
Wire Cross-Sections—
24-4 AWG [0.22-25 mm2]
Flat Ribbon Cables—width up
to 40mm
Length Range—0.04”-328ft
[1mm - 99.99m] (+/- 0.2%)
Electrical—110/230 V 50/60Hz, switches automatically
Application Tooling
Note: All part numbers are RoHS
compliant.
AMP-O-MATIC StripperCrimper Machines,
854040-3, -4
7
Note: For additional tooling options, contact Tyco Electronics or reference the Tyco Electronics web site.
301
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Application Tooling (Continued)
CERTI-CRIMP Straight
Action Hand Tools (SAHT)
Premium grade hand tools.
Feature ratchet control to
provide complete crimp
cycle. Die sets close in a
straight line. Include a
contact locator and wire
stop, plus an insulation
crimp adjustment lever,
when applicable.
Approximate weight 1.3 lb
[0.59 kg]
All CERTI-CRIMP head
assemblies / dies, have
multiple power options
available. The
accompanying diagram
outlines those power
options. See catalogs
1654714 (SDE Electric
Terminator), 124208 (626
Pneumatic Tool System) and
1773381(Battery-Powered
Crimp Tool Kits) for more
information.
For more information, request
Catalog 65780.
PRO-CRIMPER III
Hand Tool
Commercial grade hand
tool for crimping various
products. Features ratchet
control to provide complete
crimp cycle. Accepts both
pinned- and shoulderedstyle die sets. Locators are
provided with pinned-style
die sets for proper contact
and wire positioning, and
to help minimize contact
rotation and bending during
crimping. Approximate
weight 1.3 lb [0.60 kg].
All PRO-CRIMPER head
assemblies / dies, have
multiple power options
available. The
accompanying diagram
outlines those power
options. See catalogs
1654714 (SDE Electric
Terminator), 124208 (626
Pneumatic Tool System) and
1773381(Battery-Powered
Crimp Tool Kits) for more
information.
Application Tooling
For Crimp Snap-In
Receptacles and Locking
Clip Contacts (Continued)
Instruction Sheet
408-9930
7
Note: For additional tooling options, contact Tyco Electronics or reference the Tyco Electronics web site.
302
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Application Tooling (Continued)
For Board Mount
Receptacles and Machine
Applied Posts
Modular Insertion System
(MIS) Bench Machines,
217600 Series,
662820 Series (shown)
For Board Mount Receptacles
Bench machines for inserting a variety of products
into pc boards. Uses the
same interchangeable
insertion heads as the
Comp-U-Sertor II Machines.
Series 217600 machines
feature a manually-operated
X-Y positioning fixture, plus
a locator spotlight. The
machine cycles when the
board hole is placed on the
anvil and both triggers on
the dual handles attached
to the X-Y fixture are
depressed. Series 662820
machines, without board
fixturing, cycle automatically
when the hole is properly
located. A stabilizing disk
over the anvil helps keep
the board level.
Specifications
Width — 18 [457]
Depth — 24 [610]
Height — 18 [457]
Weight — 250 lb [113 kg]
Electrical — 120 to 220 VAC,
50 or 60 Hz (217600); 120 or
240 VAC, 60 Hz, single phase,
120 VA (662820)
Air — 80 psi [5.52 bar] min.,
15 scfm [0.00708 m3/s] min.
Insertable Area — 18 x 22
[457 x 559] max.
For more information, request
Catalog 296059.
This benchtop insertion
machine installs contacts
into PC boards at rates to
2000 per hour. A spotlight
highlights the insertion area,
and lower tooling assures
precise board location.
The machine is activated
by a foot pedal.
P300 Automatic Insertion
Machine
Specifications
Width — 57.5 [1 460]
Depth — 64.5 [1 640]
Height — 60 [1 520]
Weight — Depending on
configuration
Electrical — 110 V, 60 Hz
Air — 87 psi [6 bar]
Insertable Area — 24 x 16
[600 x 400]
For more information, contact
Tyco Electronics.
Application Tooling
Note: All part numbers are RoHS
compliant.
Automatic machine for
inserting a variety of contacts into pc boards (PCBs).
Equipped with an insertion
tool (comprised of a product-specific insertion head,
an anvil, and a product feed
mechanism). Stepper-motor
driven X-Y table positions
PCBs under insertion head.
Surface Mount Equipment
Manufacturers Association
(SMEMA) compatible inline
PCB Insertion Station for
posts, tabs, receptacles or
sockets. Stand-alone unit is
field upgradeable to Pass
Through. Mounts up to four
Tyco Electronics pneumatic
insertion heads. Modem
diagnostics standard, vision
system optional. Control
panel used to program and
monitor entire insertion
process.
7
Note: For additional tooling options, contact Tyco Electronics or reference the Tyco Electronics web site.
303
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Application Tooling (Continued)
For Board Mount
Receptacles and Machine
Applied Posts (Continued)
P350 Pin Insertion Machine
Specifications
Width — 102 [2600]
Depth — 118 [3000]
Height — 87 [2200]
Weight — approx 3500 lb
[1600 kg]
Electrical — 230 V, 50-60 Hz,
10 A
Air — 600 kPa dried air
Max. Board Size — 17.5 x 17.5
[450 x 450]
The P350 provides a wide
range of solutions for pin
insertion applications.
Quick change tooling
packs, and a wide range of
options make it a flexible
high speed platform.
Application Tooling
The P350 is a fully
automatic inline pin
insertion machine capable
of applying reeled pins,
tabs, receptacles and
similar products into PCBs.
With inline operation, an
automatic tool changer and
insertion rates up to 5 per
second, it is focused at fully
automatic high speed
operation to maximize
throughput while minimizing
costly scrap.
A servo powered XY table
positions the PCB under a
central drive station at high
speed. The tool changer
can hold up to 3 insertion
heads each capable of
applying a different product.
A unique rotary insertion
finger allows the application
of products at up to 7
different angles without
rotating the PCB. This
allows the P350 to apply
product at different angles
without a reduction in
insertion rate or the
potential positioning error
associated with PCB
rotation. Icon driven
software with touch screen
provides a simple to use,
intuitive operator interface.
7
304
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Performance Specifications
The electrical, mechanical
and environmental characteristics of the AMPMODU
.031 x .062 [0.79 x 1.57]
Interconnection System are
listed below:
Mechanical Characteristics
Contact Durability
Receptacles
Standard
High
Pressure
Pressure
75 Cycles
25 Cycles
75 Cycles
25 Cycles
N/A
N/A
75 Cycles
50 Cycles
200 Cycles
100 Cycles
Plating
.000016 [0.00041] Min. Tin
.000079 [0.00201] Min. Tin
.000100 [0.00254] Min. Tin
.000015 [0.00038] Gold
.000030 [0.00076] Gold
Locking
Clip
Contacts
N/A
N/A
25 Cycles
25 Cycles
N/A
Electrical Characteristics
Connector Durability
Contact Current Rating —
5 amperes max. for single contact in free
air, could vary due to ambient temperature, wire size and duty cycles.
Contact Resistance —
12 milliohms at 100 ma and 50 mv open
circuit.
Dielectric Rating —
At Sea Level – 1200 VAC between contacts on .156 [3.96] centers for 1 minute.
Insulation Resistance — 5 x 103
megohms (initial)
Receptacles
Mating – 16 oz. [4.45N] max. per contact after 3 mating cycles
(standard pressure)
–30 oz. [8.34N] max. per contact after 3 mating cycles
(high pressure, gold)
–60 oz. [16.68N] max. per contact after 3 mating cycles (high pressure, tin)
Unmating – 1 oz. [0.28N] min. per contact after 3 mating cycles (standard pressure)
3 oz. [0.83N] min. per contact after 3 mating cycles (high pressure)
Locking Clip Contacts
Mating – 4 lb. [17.79N] max. per contact after 3 mating cycles
Unmating – 2 lb. [8.90N] min. per contact after 3 mating cycles
Environmental Characteristics
Operating Temperature — -65°C to 105°C [-85°F to 221°F] (Gold Plated)
-65°C to 60°C [-85°F to 140°F] (Tin Plated)
Technical Documents
Various technical documents are available for your
use:
108-25016 Interconnection System,
Standard Pressure
108-25025 Interconnection System,
High Pressure, Gold
108-25025-1 Interconnection System,
High Pressure, Tin
108-36029 Locking Clip Connectors
114-25000 Crimp Snap-In Receptacle
Contacts
114-25004 Board Mount Receptacle
Contacts
114-25008 Locking Clip Contacts
114-25011 Machine Applied Straight
Posts
Note: All part numbers are RoHS compliant.
Instruction Sheets provide
instructions for assembling
or applying the product.
They are intended for the
Manufacturing Assembler or
Operator.
408-7308 Clinching Procedures for
Header Assemblies
408-7411 Suggestions for Wave
Soldering AMPMODU
Receptacles
408-7594 Tyco Electronics Hand Tool
90274-2 for Crimping
Crimp Snap-In 18-22 AWG
Contacts
408-7750 Tyco Electronics Hand Tool
90328-1 for Crimping
Crimp Snap-In Contacts
(22-26 AWG)
408-7676 AMPMODU Locking Clip
Connectors and Contacts
408-7671 Tyco Electronics Hand Tool
90308-1 for Crimping
Locking Clip Contacts
408-7678 Tyco Electronics Extraction
Tool 91104-1 for Locking
Clip Contacts
408-7981 Clinching Procedures for
Receptacle Assemblies
408-9451 Tyco Electronics Extraction
Tool 843473-1 for Crimp
Snap-In Receptacles
Product Specifications
Product Specifications
describe technical performance characteristics and
verification tests. They are
intended for the Design,
Component and Quality
Engineer.
Application Specifications
describe requirements for
using the product in its
intended application and/or
crimping information.
They are intended for the
Packaging and Design
Engineer and the Machine
Setup Person.
7
305
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Shunts
Product Facts
7600 Series Programmable
Shunts use conventional
.100 x .300 [2.54x7.62] DIP
leg spacing
■
Post Shunts are used to
common pairs of .025 [0.64]
square posts, .025 [0.64]
diameter round posts and
.022 x .026 [0.56 x 0.66]
formed posts
Shunts
■
Tyco Electronics offers a
variety of high quality
shunts for low cost
manual programming.
Tyco Electronics 7600
Series Programmable
Shunts are designed on
the standard .100 x .300
[2.54 x 7.62] DIP spacing.
Tyco Electronics Post
Shunts mate with any
common pairs of square,
rectangular and round
posts. Post shunts come
in two-position low profile,
2 mm miniature, tandem
spring, dual beam, and
multiposition versions.
Tyco Electronics DIP Shunts
are a highly reliable, low
cost means of manually
programming various types
of electrical/electronic
equipment. The shunt
consists of a series of
conductive straps packaged
in a DIP configuration. The
straps can be retained intact
for a closed circuit or broken
with a hand tool to produce
an open circuit.
Among the options
available are choices of
gold or tin plating, beryllium
copper or phosphor bronze
contact material and shunts
with 94V-0 rated housing
spaces on .079 [2.00],
.100 [2.54] and .200 [5.08]
centers with the low profile
series requiring only .250
[6.35] clearance from the
pc board.
All Tyco Electronics
shunts feature one-piece
construction for high
reliability. All have high
normal forces for excellent
electrical continuity. For
added reliability, Tandem
Spring and Dual Beam
Shunts have two points of
contact in each receptacle.
8
306
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Dual In-Line Package (DIP) Shunts — 7600 Series
Standard Shunt
Standard Pressure
Material and Finish
Housing — Glass-filled polyester, UL
94V-0 rated
Contacts — Brass
Finish — Selectively plated .000100
min. tin on solder area over .000050
min. nickel on entire contact
Contact Lead Spacing —
.100 x .300 [2.54x7.62]
Lead Length — .140 [3.56] below
mounting surface
Housing Color — Black
Programming Tool — See below
.290
[7.37]
15° Max.
Typ.
.079
[2.01]
Programming Hand Tool
Part No. 435862-1
.100 ± .005
Typ.
[2.54 ± 0.13]
.035 ± .005
Dia. Typ.
[0.89 ± 0.13]
.300 ± .005
[7.62 ± 0.13]
This tool provides a reliable means of
programming DIP shunts. It is rugged,
light-weight and dependable. No special
skills are required to use this tool.
No. of
Pos.
4
6
7
8
9
10
12
Dimension A
inch
mm
.400
10.16
.600
15.24
.700
17.78
.800
20.32
.900
22.86
1.000
25.40
1.200
30.48
Standard Shunt
Standard Pressure
1825190-4
1825190-6
1825190-7
1825190-8
1825190-9
1-1825190-0
1-1825190-2
Shunts
8
Note: All part numbers are RoHS compliant.
307
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Post Shunts
Product Facts
2-Position, Low Profile Shunts
■
One-piece contact
construction
Economy Shunt
.100 [2.54] Centerline
■
High normal forces
■
94V-0 rated housings
■
Gold inlay, gold plate or tin
plate over nickel
■
Stackable
■
Those post shunts indicated
are recognized under the
component program of
Underwriters
Laboratories Inc.,
File No. E28476
and certified by the
Canadian Standards
Association
File No. LR 7189
2.498
[63.45]
R
R
Configuration Housing
Color
Tandem Spring Shunts
■
Two points of contact
provide extra reliability
■
Shunts accept posts as
short as .175 [4.45]; posts
bottom at .330 [8.38]
Strip of 10
Strip of 10
Strip of 10
Loose Piece
1In
Blue
Black
Red
Black
Gold Plate1
.000015
[0.00038]
382811-2
382811-6
382811-9
1-382811-6
Part Numbers
Gold Flash1
Tin Plate
.000005
.000100
[0.00013]
[0.00254]
—
—
382811-8
382811-5
—
—
1-382811-8
—
Gold Plate
.000030
[0.00076]
—
2-382811-0
—
—
contact area
2mm Mini Shunts
■
Stackable on 2mm contact
centerline
■
Low profile
■
Available in strips of 10
Standard Housing Shunt
.200 [5.08] Centerline
R
R
Material and Finish —
Low Profile and 2mm Shunts
3.453
[87.70]
Housing — Glass-filled thermoplastic,
black, UL 94V-0 rated
Contacts — Beryllium copper or
phosphor bronze, plated .000050
[0.00127] nickel underplate with gold
plate in contact area or tin overall
Shunts
Material and Finish —
Tandem Spring Shunts
Housing — Nylon, UL 94V-0 rated
Contacts — Phosphor Bronze
Finish — .000030 [0.00076] nickel
underplate with gold inlay in the contact
area or tin overall
8
Configuration
Housing
Color
Strip of 10
Black
1In
Gold Plate1
.000015
[0.00038]
531230-2
Part Numbers
Gold Plate1
.000030
[0.00076]
531230-3
Tin Plate
.000100
[0.00254]
531230-1
contact area
Note: All part numbers are RoHS compliant.
308
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Post Shunts (Continued)
2-Position,
Low Profile Shunts (Novo)
(Continued)
Handle Shunt
.100 [2.54] Centerline
Housing
Color
Black
Black
1In
Gold Plate1
.000015
[0.00038]
881545-1
880584-1
Loose Piece Part Numbers
Gold Plate1
Gold Plate1
.000030
.000050
[0.00076]
[0.00127]
881545-2
881545-3
880584-2
880584-3
Tin Plate
.000100
[0.00254]
4-881545-2
880584-4
Type
Open Top
Closed Top
contact area
2 mm Mini-Shunt
.079 [2.00] Centerline
R
R
Configuration Housing
Color
Strip of 10
1In
Black
Part Numbers
Gold Plate1
Gold Plate1
.000015
.000030
[0.00038]
[0.00076]
382575-2
382575-3
contact area
Dual Beam Shunt
2.500
[63.5]
Ref.
Shunts
.196
[4.98]
Ref.
.247
[6.27]
Ref.
.096
[2.44]
Configuration Housing
Color
Note: All part numbers are RoHS
compliant.
Strip of 10
Strip of 10
Strip of 10
1In
Black
Blue
Yellow
Part Numbers
Gold Plate1
Gold Plate1
.000015
.000030
[0.00038]
[0.00076]
390088-2
390088-1
390088-4
390088-3
—
390088-5
Type
8
Open Top
Open Top
Open Top
contact area
309
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Post Shunts (Continued)
Tandem Spring Shunt
.100 [2.54] Centerline
R
R
Housing
Color
Black
1In
Part Numbers
TinPlate
Gold Inlay1
.000030
.000100
[0.00076]
[0.00254]
530153-2
4-530153-1
contact area
Multiposition Shunts
for.025 [0.64] Square Posts
.300
[7.62]
MAX
A
.200 [5.08] Centerline
.200
[5.08]
.150
[3.81]
REF
R
R
.048
[1.22]
REF
Housing — Glass-filled polyester
Contacts — Beryllium Copper
Finish — .000030 [.00076] gold in
contact area over .000050 [.00127]
nickel on entire contact
Current Rating — 2.5 amps
.250
[6.35]
MAX
.550
[13.97]
Shunts
Size
2x2
2x2
2x3
Dimension A
inch
.246
.246
.396
mm
6.25
6.25
10.01
Housing
Color
Part
Number
Black
Red
Black
390102-1
390102-3
390102-2
8
Note: All part numbers are RoHS compliant.
310
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Performance Specifications
Dual In-Line Package (DIP) Shunts — 7600 Series
Current Rating —
Standard pressure — 2 amperes for +20˚C rise above ambient (one conductor per shunt
Machine insertable — 1 ampere for +20˚C rise above ambient (one conductor per shunt)
Insulation Resistance — 1x 1010 ohms min. at 100 VDC
Dielectric Withstanding Voltage — 500 VDC min.
Capacitance — 2 picofarads max. between adjacent straps
Temperature Rating — -55˚C to +105˚C
Terminal Strength (Bend Test) — Two 45˚ bend cycles per MIL-STD-202, Method 211, Condition B
Solder Bridging —
Cut straps can be reconnected by solder bridging. Solder bridging recommendations are:
•Use low temperature solder (60/40 tin/lead)
•Use solder tip approximately 1/32 [0.79] in diameter
•Do not let solder tip come in contact with plastic material
Post Shunts
Current Rating —
3 amperes max. unless otherwise noted
Temperature Rating — -65˚C to +105˚C (gold) -40˚C to +85˚C (tin)
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-7533
108-1445
108-1476
108-1674
108-9057
108-9062
108-37006
Dual In-Line Package (DIP) Shunts
2mm Mini Shunt
Economy Shunt, Multiposition Shunt
Dual Beam Shunt
Low Profile Shunt
Tandem Spring Shunt
Novo Shunt with Handle
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-1045
114-1054
114-1059
114-1074
Tandem Spring Shunt
Dual In-Line Package (DIP) Shunts
Economy Shunt, Dual Beam Shunt, Low Profile Shunt, Multiposition
Shunt
2mm Mini Shunt
Shunts
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-7768
408-3208
408-3230
408-3251
408-3276
Dual In-Line Package (DIP) Shunts
Tandem Spring Shunt
Economy Shunt, Dual Beam Shunt, Low Profile Shunt
Multiposition Shunt
2mm Mini Shunt
8
311
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Engineering Notes
8
312
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Part Number Index
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
19156
57013
57038
57118
57119
57131
57138
57139
57144
57145
57288
57289
57290
85487
85493
85829
85839
85840
85875
85923
85969
86016
86147
86177
86181
86182
86207
86286
86432
86434
86477
86479
86480
86492
87003
87022
87025
87046
87077
87105
87107
87116
87124
87131
87132
87133
87159
87160
87165
87175
87176
87179
87190
87191
87194
87195
87215
87220
87224
Page
139, 140
58
58
58
58
58, 59
58
58
58
58
58
58
58
286
286
295
296
296
296
296
213
213
294
216
285, 287, 288
294
296
169, 172, 175-177,
180, 182, 189, 191,
195-197, 214-218, 220,
256, 257
286
286
286
98, 99
286
213
286
163
291
213
214-218, 220,
256, 257
286
211
293
207
209
209
209
293
295
207
208
209
208, 209
207
207
297
213
96, 97
85, 93
93
Part No.
Page
87227
85, 96, 97
87230
85, 98, 99
87232
85, 94, 95, 210, 221
87233
94, 95
87247
295
87258
297
87262
295
87269
298
87270
299
87278
298
87283
296
87309
213
87316
286
87456
210, 216
87474
129
87483
210
87496
133
87499
210, 214
87523
213
87568
127
87572
126
87577
124, 125
87579
122, 123
87587
119, 120
87589
117, 118
87605
85, 131
87608
130
87623
163
87631
210, 218, 219
87654
297
87655
297
87666
213
87667
213
87710
218
87733
219
87743
204
87756
210, 213
87772
286
87774
286
87809
213
87878
163
87879
85, 177
87921
218
87922
218, 219
87977
210, 217
87983
287
87984
287
87985
287
87986
287
87987
289
87988
289
87989
287
87990
287
87993
287
87995
289
102055
126
102090
292
102095
211
102099
290
102100
290
102102
290
102103
290
Part No.
102104
102106
102107
102114
102128
102185
102198
102202
102203
102241
102312
102316
102338
102348
102387
102393
102394
102395
102396
102398
102399
102448
102449
102523
102536
102537
102540
102541
102548
102557
102567
102570
102589
102617
102618
102619
102620
102641
102642
102666
102681
102690
102691
102692
102693
102694
102695
102699
102742
102766
102777
102783
102784
102785
102786
102787
102788
102789
102791
102792
102802
102823
Page
290
290
211
203
210, 213
255, 258, 259
139, 140
115, 210
85, 116
210, 215
258, 259
213
203
211
210, 220
256
256
265
255, 259
255, 256
265
256
265
116
255, 259
255, 259
255, 259
255, 259
213
149
198
124, 125
193, 200
122, 123
117, 118
119, 120
127
265
265
199
255, 259
193, 199
199
198
257
257
257
85, 148
177
142
199
262, 263
262, 263
262, 263
262, 263
262, 263
262, 263
263
264
264
200
259
313
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
Part Number Index
AMPMODU Interconnection System
Part Number Index (Continued)
Part No.
102826
102871
102898
102903
102917
102918
102920
102935
102972
102973
102976
102977
102985
102987
102988
102991
103056
103058
103080
103136
103137
103138
103139
103140
103141
103152
103153
103157
103158
103164
103165
103166
103167
103168
103169
103171
103185
103186
103233
103239
103240
103264
103268
103291
103321
103322
103327
103328
103336
103340
103341
103349
103350
103361
103414
103455
103542
103577
103634
103635
Page
144
143
146
263
213
213
213
280
107
107
107
107
263
261, 263
261, 263
264
281
281
115
261, 263
261, 263
262, 263
262, 263
262, 263
262, 263
261, 263
261, 263
261, 263
261, 263
85, 126
127
85, 122, 123,
210, 255
124, 125
85, 117, 118,
210, 255
119, 120
213
107
107
147
107
107
193, 201
259
199
107
107
107
107
85, 146
261, 263
261, 263
281
281
116
85, 115
213
85, 147
85, 163
247
247
Part No.
103639
103640
103641
103644
103645
103648
103649
103650
103651
103652
103653
103654
103655
103656
103657
103658
103659
103660
103661
103669
103672
103673
103680
103681
103682
103684
103685
103686
103687
103688
103734
103735
103817
103893
103894
103895
103896
103897
103900
103901
103902
103903
103904
103908
103911
103916
103944
103945
103946
103947
103948
103949
103950
103951
103952
103953
103954
103955
103956
103957
103958
103959
Page
245
231
231
231
231
233
233
233
233
233
237
239
239
239
239
237
237
237
237
245
247
247
240
241
242
229
229
229
229
221, 229
231
245
86, 100
237
237
239
239
231
233
233
229
229
247
245
39
35
237
237
237
237
237
237
239
239
239
239
239
239
231
231
231
231
Part No.
103960
103961
103968
103969
103970
103971
103972
103973
103974
103975
103976
103977
103978
103979
104068
104069
104071
104074
104076
104078
104118
104178
104186
104192
104196
104257
104271
104272
104317
104319
104361
104362
104363
104438
104439
104450
104477
104479
104480
104481
104482
104483
104500
104503
104505
104506
104549
104550
104583
104584
104652
104655
104656
104666
104693
104744
104804
104809
104891
104892
104893
104894
Page
231
231
233
233
233
233
233
233
229
229
229
229
229
229
30
29
28
27
31
40
34
33
32
38
37
221, 231
261, 263
261, 263
121
128
250
245
245
234
234
221, 248
29
221, 222, 253
221, 222, 253
221, 222, 253
221, 223
224
241
239
254
254
44
45
282
282
15
16
16
30
16
40
28
249
22
21
21
19
Part No.
104895
104905
104909
104910
104935
111196
146079
146128
146129
146130
146131
146132
146133
146134
146135
146138
146205
146250
146252
146253
146254
146256
146257
146258
146260
146261
146262
146264
146265
146266
146268
146269
146270
146272
146273
146274
146276
146277
146278
146280
146281
146282
146284
146285
146286
146288
146289
146290
146292
146293
146294
146296
146297
146304
146305
146306
146307
146308
146309
146310
146311
146315
Page
19
208
245
245
247
56
163
109
109
110
110
86, 109
109
86, 110
110
178
202
104, 107
104, 107
104, 107
104, 107
104, 107
85, 104, 107
104
104
104
104
104
104
104
85, 104
104
104
104
104
102, 107
102, 107
102, 107
102, 107
102, 107
85, 102, 107
102
102
102
102
102
102
102
102
85, 102
102
102
102
85, 103
103
85, 103
103
85, 105
105
105
105
202
314
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Part Number Index
Part Number Index (Continued)
Part No.
146386
146427
146455
146456
146457
146458
146459
146460
146461
146462
146463
146464
146465
146466
146467
146468
146469
146470
146471
146472
146473
146474
146475
146476
146477
146478
146479
146480
146481
146482
146483
146484
146485
146486
146487
146488
146489
146490
146491
146492
146493
146494
146495
146496
146497
146498
146499
146500
146501
146502
146503
146504
146505
146506
146507
146508
146509
146510
146762
146763
146850
146851
Page
175
85
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
86, 112
112
112
112
112
112
112
112
112
113
113
113
113
113
113
113
85, 113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
176
175
107
107
Part No.
146852
146853
146858
146859
146860
146861
146868
146869
146870
146871
147030
147070
147071
147072
147095
147096
147099
147100
147101
147102
147103
147104
147105
147106
147121
147254
147278
147323
147324
147326
147333
147334
147335
147377
147378
147381
147382
147383
147384
147396
147413
147424
147433
147434
147435
147436
147437
147438
147503
147720
147723
147724
147726
147727
147728
147729
147730
147731
147736
147737
147738
147739
Page
107
107
107
107
107
107
107
107
107
107
235
86, 167
167
167
183, 184
183, 184
182
182
190
190
190
192
86, 192
192
16
202
251
251
251
177
86, 165
165
165
44
45
16
16
16
15
235
15
176
165
165
165
167
167
167
16
86, 181
188
187
181
181
188
188
187
187
188
188
86, 188
192
Part No.
147740
147741
147742
147743
147744
147745
147746
147747
173144
173145
173146
219054
219055
219137
219138
219253
382575
382811
390088
390102
487544
487545
487547
487576
487923
487937
487938
487940
487941
499991
530153
530554
530901
530902
531226
531230
532955
532956
533009
534204
534206
534237
534245
534257
534258
534267
534972
534974
534975
534978
534998
535541
535542
535584
535585
535598
746383
867052
880584
881545
966926
1375549
Page
192
192
187
187
187
190
190
190
155, 156
155, 157, 158, 159
155, 160, 161
58
58
58
58
58
309
308
309
310
50
50
48
54
48
52
52
48
48
205
310
267
269
268
267, 268
308
195
193, 195
195
195
85, 176
85, 175
200
198
201
85, 182
193, 196
193, 197
195
198
85, 179, 180
85, 178
86, 183, 184
178
179, 180
179, 180
139, 140
207
309
309
72
252
Part No.
1375582
1375583
1375791
1375792
1375793
1375794
1375795
1375796
1375797
1375798
1375799
1375800
1375801
1375959
1375961
1375963
1375965
1375967
1445251
1445439
1445440
1445441
1470108
1470109
1470209
1470213
1734493
1734506
1734507
1734508
1734516
1734531
1734569
1734606
1734770
1825190
1825851
2041068
2041069
5084476
5084780
5086147
5086182
5102084
5102154
5102156
5102160
5102162
5103308
5103309
5103310
5103311
5104338
5104340
5111595
5146139
5146140
5147721
5147722
5147732
5147733
5147734
Page
252
252
7, 12
7
7, 12
7
6, 12
6
9
9
8
8
12
10
10
10
11
11
12
12
12
12
79
78
80
66
75
81
67
66
84
83
77
82
73
307
139, 140, 210
76
84
71
74
294
294
170
139, 210, 255
139
140
140
135
135
136
136
137
138
57
169
170
86, 172
86, 173
172
172
173
315
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
Part Number Index
AMPMODU Interconnection System
Part Number Index (Continued)
Part No.
5147735
5176264
5176837
Page
173
70
68
Part No.
5178751
5530553
5530901
Page
70
269
269
Part No.
5531216
5531224
5531225
Page
269
269
269
Part No.
5535512
5535676
5535677
Page
85, 170
85, 169
169
Part No.
104072
217600
224910
265871
265964
308554
312522
318619
354500
354786
356484
356500
380392
466007
466376
466562
466571
466655
466721
466723
466763
466764
466812
466819
466905
466918
466921
466937
466943
466950
466952
466980
466981
466982
466983
Page
253
153, 164, 166, 303
48, 60
152
152
152
274
48, 60
300
275
60
300
152
298
286
213
213
213
207
269
290
290
211
269
213
213
213
290
269
298
269
222, 253
222, 253
222, 253
254
Part No.
527116
543518
547178
565967
567239
567296
567297
567298
567307
567310
662820
679167
679996
758030
761420
768338
812665
843473
843477
843996
Page
263
23
301
286
254
222, 253
222, 253
222, 253
211
207
303
62
207
162
275
62
263
290
253, 254, 265
214, 215, 216,
217, 218, 219, 220
301
274
274
273
163
163
163
163
166
164
162
273
300
Tooling Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
58062
58074
58075
58336
58338
58342
58395
58540
58641
90273
90274
90295
90308
90328
90381
90431
91047
91084
91085
91104
91112
91169
91170
91171
91200
91295
91410
91419
91516
91517
91518
91531
91533
91541
91551
Page
273
273
273
273
273
254
273
273
211, 213
60
290
207
298
290
211
207
60
207
62
298
62
152
152
152
60
23
263
163
213
211, 213
222, 253
254
207
213
222, 253
854040
854449
856002
856675
904507
904590
904591
904592
904640
904641
907459
931800
1213400
316
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Engineering Notes
317
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Engineering Notes
318
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
Global Contacts
Americas
Argentina – Buenos Aires
Phone: +54-11-4733-2200
Fax:
+54-11-4733-2211
Brasil – São Paulo
Phone: +55-11-2103-6000
Fax:
+55-11-2103-6030
Canada – Toronto
Phone: +905-475-6222
Fax:
+905-474-5520
Product Information Center:
Phone: +905-470-4425
Fax:
+905-474-5525
Chile – Santiago
Phone: +56-2-345-0361
Fax:
+56-2-223-1477
Colombia – Bogota
Phone: +57-1-319-8959
Fax:
+57-1-319-8960
Mexico – Mexico City
Phone: +52-55-1106-0800
+01-800-733-8926
Fax:
+52-55-1106-0901
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax:
+54-11-4733-2083
United States
Harrisburg, PA
Phone: +1-717-564-0100
Fax:
+1-717-986-7575
Product Information Center:
Phone: +1-800-522-6752
Fax:
+1-717-986-7575
Troy, MI
Phone: +1-248-273-3359
Fax:
+1-248-273-3322
Asia/Pacific
Australia – Sydney
Phone: +61-2-9554-2600
Fax:
+61-2-9502-2556
Product Information Center:
Phone: +61-2-9840-8200
Fax:
+61-2-9634-6188
Japan – Kawasaki, Kanagawa
Phone: +81-44-844-8111
Fax:
+81-44-812-3207
Product Information Center:
Phone: +81-44-844-8013
Fax:
+81-44-812-3200
India – Bangalore
Phone: +91-80-285-40800
Fax:
+91-80-285-40820
Korea – Seoul
Phone: +82-2-3415-4500
Fax:
+82-2-3486-3810
Indonesia – Jakarta
Phone: +65-6482-0311
Fax:
+65-6482-1012
Malaysia – Selangor
Phone: +60-3-7805-3055
Fax:
+60-3-7805-3066
New Zealand – Auckland
Phone: +64-9-634-4580
Fax:
+64-9-634-4586
Singapore – Singapore
Phone: +65-6482-0311
Fax:
+65-6482-1012
Philippines – Makati City
Phone: +632-848-0171
Fax:
+632-867-8661
Taiwan – Taipei
Phone: +886-2-8768-2788
Fax:
+886-2-8768-2268
People’s Republic of China
Hong Kong
Phone: +852-2735-1628
Fax:
+852-2735-0243
Thailand – Bangkok
Phone: +66-2-955-0500
Fax:
+66-2-955-0505
Shanghai
Phone: +86-21-2407-1588
Fax:
+86-21-2407-1599
Vietnam – Ho Chi Minh City
Phone: +84-8-930-5546
Fax:
+84-8-930-3443
Europe/Middle East/Africa
Austria – Vienna
Phone: +43-1-905-60-0
Fax:
+43-1-905-60-1333
Product Information Center:
Phone: +43-1-905-60-1249
Fax:
+43-1-905-60-1251
France – Cergy-Pontoise Cedex
Phone: +33-1-3420-8888
Fax:
+33-1-3420-8600
Product Information Center:
Phone: +33-1-3420-8686
Fax:
+33-1-3420-8623
Belarus – Minsk
Phone: +375 17 237 47 94
Fax:
+375 17 237 47 94
France Export Divisions –
Cergy-Pontoise Cedex
Phone: +33-1-3420-8804
Fax:
+33-1-3420-8699
Belgium – Kessel-Lo
Phone: +32-16-352-300
Fax:
+32-16-352-355
Bulgaria – Sofia
Phone: +359-2-971-2152
Fax:
+359-2-971-2153
Czech Republic and Slovakia
Czech Republic – Kurim
Phone: +420-541-162-111
Fax:
+420-541-162-223
Product Information Center:
Phone: +420-541-162-113
Fax:
+420-541-162-132
Denmark – Glostrup
Phone: +45-43-48-04-00
Fax:
+45-43-44-14-14
Egypt – Cairo
Phone: +202-419-2334
Fax:
+202-417-7647
Estonia – Tartu
Phone: +372-5138-274
Fax:
+372-7400-779
Finland – Helsinki
Phone: +358-95-12-34-20
Fax:
+358-95-12-34-250
1307819–7.5M–LUG–FP–8-08
Printed in the U.S.A.
Germany – Bensheim
Phone: +49-6251-133-0
Fax:
+49-6251-133-1600
Product Information Center:
Phone: +49-6251-133-1999
Fax:
+49-6251-133-1988
Greece – Athens
Phone: +30-210-9370396/397
Fax:
+30-210-9370-655
Hungary – Budapest
Phone: +36-1-289-1000
Fax:
+36-1-289-1010
Product Information Center:
Phone: +36-1-289-1016
Fax:
+36-1-289-1017
Ireland – Dublin
Phone: +353-1-866-5612
Fax:
+353-1-866-5714
Israel – Petach-Tikva
Phone: +972-3-929-0999
Fax:
+972-3-919-1088
Italy – Collegno (Torino)
Phone: +39-011-4012-111
Fax:
+39-011-4031-116
Product Information Center:
Phone: +39-011-4012-428
Fax:
+39-011-40-287-428
Lithuania and Latvia
Lithuania – Vilnius
Phone: +370-5-213-1402
Fax:
+370-5-213-1403
Product Information Center:
Phone: +370-5-211-3016
Fax:
+370-5-213-1403
Slovenia – Ljubljana
Phone: +386-1561-3270
Fax:
+386-1561-3240
Netherlands – ’sHertogenbosch
Phone: +31-73-6246-246
Fax:
+31-73-6212-365
Product Information Center:
Phone: +31-73-6246-999
Fax:
+31-73-6246-998
Spain – Barcelona
Phone: +34-93-291-0330
Fax:
+34-93-201-7879
Norway – Nesbru
Phone: +47-66-77-88-50
Fax:
+47-66-77-88-55
Poland – Warsaw
Phone: +48-22-4576-700
Fax:
+48-22-4576-720
Product Information Center:
Phone: +48-22-4576-704
Fax:
+48-22-4576-720
Romania – Bucharest
Phone: +40-21-311-3479/3596
Fax:
+40-21-312-0574
Russia – Moscow
Phone: +7-495-790-7902
Fax:
+7-495-721-1893
Product Information Center:
Phone: +7-495-790-7902-404
Fax:
+7-495-790-7902-401
Russia – St. Petersburg
Phone: +7-812-718-8192
Fax:
+7-812-718-8193
South Africa – Port Elizabeth
Phone: +27-41-503-4500
Fax:
+27-41-581-0440
Sweden – Upplands Väsby
Phone: +46-8-50-72-50-00
Fax:
+46-8-50-72-50-01
Switzerland – Steinach
Phone: +41-71-447-0447
Fax:
+41-71-447-0444
Turkey – Istanbul
Phone: +90-212-281-8181/2/3
+90-212-2825130/5430
Fax:
+90-212-281-8184
Ukraine – Kiev
Phone: +380-44-206-2265
Fax:
+380-44-206-2264
Product Information Center:
Phone: +380-44-206-2265
Fax:
+380-44-206-2264
United Kingdom –
Stanmore, Middlesex
Phone: +44-8706-080208
Fax:
+44-208-954-6234
Product Information Center:
Freephone (UK only):
+0800-267-666
Phone: +44-8706-080208
Fax:
+44-208-420-8095
Tyco Electronics Corporation
www.tycoelectronics.com
Catalog 1307819 Revised 8-08
tycoelectronics.com
1307819–7.5M–LUG–FP–8-08
AMPMODU Interconnection System
Tyco Electronics Corporation
Harrisburg, PA
AMPMODU
Interconnection System
工商网监
湘ICP备2023018690号
